linealed - insight lighting · linealed interior - integral power supply ... br = bronze n =...

LineaLEDINTERIOR - INTEGRAL POWER SUPPLY

ACTIVE WHITE (TUNABLE)SHAPING THE EXPERIENCE OF LIGHT

Insight Lighting www.insightlighting.com

September 20, 2016 11:26 AM1 of 7

CIRCUIT LIMITATIONS • 1600 watts at 120 VAC, (33) 48 watt drivers at full load – One driver per fixture • 2800 watts at 277 VAC, (58) 48 watt drivers at full load- One driver per fixture

ITEM SPECIFICATION

LIGHT SOURCE 12W/FT

OPTICS

COLOR TEMPERATURES ACTIVE WHITE COLOR TEMPERATURE TUNING FROM 27K - 65K

CRI 83

PERFORMANCE ACTIVE WHITE (4000K) - 48" FIXTURE

FIXTURE WATTAGE(TOTAL WATTAGE)

OPTICS LUMENS EFFICACY lm/W

12.0 W/FT 100° 4004 91 lm/W

3.5W/ft fixture meets current ASHRAE requirements

LUMEN MAINTENANCE 75,000 hrs L70

ELECTRICAL AC LINE VOLTAGE 120V, 240V, 277V

POWER SUPPLY INTEGRAL TO THE LUMINAIRE

CONTROL DMX READY DMX Fixture Resolution

PHYSICAL HOUSING Extruded aluminum housing with tooledend caps, powder-coat finish

DIMENSIONS 2-3/4" Diameter12" / 24" / 36" / 48" Single fixtures and multiple fixture run

LENS Standard Lens: Translucent acrylic snap-in tool-less lensOptional Lens: Diffuse Direct View Dome Lens (DV Option)

OPERATING TEMPERATURE -20° C to 40° C

CERTIFICATION ETL and cETL approved for Dry Location

RoHSCOMPLIANT

WARRANTY 5 YEAR LIMITED

All LineaLED products are tested to IES LM-79, LM-80 and ANSI C78.377A standards




September 20, 2016 11:26 AM2 of 7

LIN

STEP 1 - FIXTURE ORDERING INFORMATIONPrefix Wattage

W / FtLED

Color/CCTOptics Light

DirectionMounting Fixture

LengthVoltage/

Wiring MethodControl Options Finish

(Semi-Gloss)Options

LIN

LineaLEDSERIES

ACTIVE WHITE(KELVIN TUNABLE)

U = Uplight

D = Downlight

12" Fixtures

MPP = Mono-Point Pendant

SRS = Semi-Recessed

Single Fixtures

12"

INT1 = 120V integral power

INT2 = 277V integral power

DMXFX = DMX Fixture Resolution

DMX Controls are Required.

Order separately.

W = White

BL = Black

BR = Bronze

N = Natural

S = Satin

CC = Custom Color �

� Contact factory for

custom color. Additional

charges will apply.

DV = Diffused Direct View Lens

12 AWH 100°

WW(Wallwash)

Kelvin Tuning from 27K - 65K

24-48" Single Fixtures

CES = Close End

EAS-X = Extended Arm

ACS = Aircraft Cable

PNS-X = Pendant

SRS = Semi-Recessed

24-48" Single

Fixtures

24"

36"

48"

Multiple Fixture Run

CEM = Close End

EAM-X = Extended Arm

ACM = Aircraft Cable

PNM-X = Pendant

Multiple Fixture Run

Specify nominal run length in feet

• All Active White products require a DMX programmer for proper mixing. Must order separately.

• One LPT is required for field re-addressing of factory DMX settings. See below.

STEP 2 - ORDER DMX DISTRIBUTION & PROGRAMMING KITDMX DISTRIBUTION & PROGRAMMING KIT - REQUIRED FOR ALL COLOR CHANGING INSTALLATIONS

CATALOG NUMBER DESCRIPTION

LPT DMX PROGRAMMING TOOL: One LPT is required for field re-addressing of factory DMX settings.

CDS-A DMX DISTRIBUTION KIT ONLY (3 OUTPUTS): CDS-A consists of three outputs. Each output accommodates up to 32 fixtures in INT/REM wiring methods and unlimted fixtures in ACV wiring method.Four terminators are included for use as required.




September 20, 2016 11:26 AM3 of 7

Housing provided with finished steel mounting brackets attached to die-cast end plates with flush cap screws, allowing for ease of adjustment.Standard power feed location is on left side of fixture. If different power feed location is required, please request a modification.

CES - Close End Mount, Single Fixture

CEM - Close End Mount, Multiple Fixture Run

Nominal Length(START)

Nominal Length(MID)

Nominal Length(MID)

Nominal Length(MID)

Nominal Length(END)

OVER-ALL LENGTH

Sequence of fixtures must be identified in multiple fixture runs. Use table below to arrange Nominal Lengths of START, MID, and END fixtures to equal OVER-ALL desired length. *INSIGHT LIGHTING reserves the right to arrange fixtures as seen fit if sequence is not indentified by customer.*OVER-ALL LENGTH is Nominal; Refer to Mounting Table for exact fixture dimensions.

Nominal LengthSingle Fixture

24" 36" 48"

'A' 24-7/8" 36-7/8" 48-7/8"

'B' 23-1/2" 35-1/2" 47-1/2"


24" 36" 48"

'A' 2' 3-3/4" 3' 3-3/4" 4' 3-3/4"

'B' 2' 1/2" 3' 1/2" 4' 1/2'

'C' 2' 1-1/2" 3' 1-1/2" 4' 1-1/2'

'D' 2' 2-3/4" 3' 2-3/4" 4' 2-3/4"

"B"

3"

"B"

"A"

60°Rotation

"D"

"B""D" "D" "C"

"C"

"A"

"D"

"A"

q q

1-1/2"

3-3/8"Power Feed

2-3/4"

Ø2-3/4"

"B"3-3/8"

1-1/2" TYP.

MountingBracket

Single Gang J-Box(by others)

Canopy

(2X) Clearanceholes for 1/4"

mounting hardware(by others)

MOUNTING DETAIL

Power Feed LocationSingle Gang J-Box (by others)

Power Feed

4"3/4"

3-1/2"

1-1/2"

Ø2-3/4"

60°ROTATION

TOP VIEW - CES MOUNT

BOTTOM VIEW - SMS MOUNT

TOP VIEW - CEM MOUNT

qq q"C"

4"

MountingBracket


Canopy



"D"

3/4" TYP.

MOUNTING DETAIL

Power Feed LocationSingle Gang J-Box(by others)

Standard power feed location is on left side of fixture. If different power feed location is required, please request a modification.

"B"

3"

"B"

"A"

60°Rotation

"D"

"B""D" "D" "C"

"C"

"A"

"D"

"A"

q q

1-1/2"

3-3/8"Power Feed

2-3/4"

Ø2-3/4"

"B"3-3/8"

1-1/2" TYP.

MountingBracket


Canopy



MOUNTING DETAIL

Power Feed LocationSingle Gang J-Box (by others)

Power Feed

4"3/4"

3-1/2"

1-1/2"

Ø2-3/4"

60°ROTATION

TOP VIEW - CES MOUNT

BOTTOM VIEW - SMS MOUNT

TOP VIEW - CEM MOUNT

qq q"C"

4"

MountingBracket


Canopy



"D"

3/4" TYP.

MOUNTING DETAIL

Power Feed LocationSingle Gang J-Box(by others)

TOP VIEWMPP MOUNT

Ø4-1/8"

5-1/2"

40°Rotation

Ø4-1/8"

5-1/2"3"

40°Rotation

13"

BACK VIEWFRONT VIEW

TypicalJ-Box Installation(J-Box by others)

WALL MOUNT CEILING MOUNT

Rigid steel stem conceals leads and are painted to match luminaire. 4” diameter low profile canopy is provided as a standard. The canopy is painted to match luminaire unless otherwise specified.

MPP - Mono Point Pendant - Single 12" Fixture




September 20, 2016 11:26 AM4 of 7

EAS/EAM - Extended Arm Mount Single / Extended Arm Mount Multiple FixturesExtended arms are constructed of steel tubing welded to heavy gauge steel wall brackets. Mounting brackets, arms, and canopies are painted to match luminaire. All leads are concealed within the extended arms.

EAS - Extended Arm Mount, Single Fixture

EAM - Extended Arm Mount, Multiple Fixture Run


Nominal Length(MID)

Nominal Length(MID)

Nominal Length(MID)

Nominal Length(END)

OVER-ALL LENGTH

Sequence of fixtures must be identified in multiple fixture runs.Use table below to arrange Nominal Lengths of START, MID, and END fixtures to equal OVER-ALL desired length.

*INSIGHT LIGHTING reserves the right to arrange fixtures as seen fit if sequence is not indentified by customer.

*OVER-ALL LENGTH is Nominal; Refer to Mounting Table for exact fixture dimensions.


Standard power feed location is on left side of fixture. If different power feed loca-tion is required, please request a modification.


24" 36" 48"

'A' 28-3/4" 40-3/4" 52/34"

'B' 26-3/4" 38-3/4" 50-3/4"


24" 36" 48"

'A' 27-3/4" 39-3/4" 51-3/4"

'B' 26-3/4" 38-3/4" 50-3/4"

'C' 26-3/4" 38-3/4" 50-3/4"

"A"

"B"

"A"

J-Box (by others)

60°Rotation

Ø2-3/4"

SPECIFYMIN 6"

MAX 24"

"B"Ø5"CANOPY4-3/4"

Mounting Plate 4-1/8"

4-1/8"

J-Box (by others)

60°Rotation

Ø2-3/4"

SPECIFYMIN 6"

MAX 24"

2"(Typ.)

"C" "C" "C"

"A" "B"

"C" "C" "C"4-3/4"

Mounting Plate

Ø5"CANOPY

4-1/8"

4-1/8"

TOP VIEW - EAS MOUNT

TOP VIEW - EAM MOUNT

MOUNTING DETAIL

MOUNTING DETAIL

2"(Typ.)

Power-Feed Location 12" Input Lead Provided


"A"

"B"

"A"

J-Box (by others)

60°Rotation

Ø2-3/4"

SPECIFYMIN 6"

MAX 24"

"B"Ø5"CANOPY4-3/4"

Mounting Plate 4-1/8"

4-1/8"

J-Box (by others)

60°Rotation

Ø2-3/4"

SPECIFYMIN 6"

MAX 24"

2"(Typ.)

"C" "C" "C"

"A" "B"

"C" "C" "C"4-3/4"

Mounting Plate

Ø5"CANOPY

4-1/8"

4-1/8"

TOP VIEW - EAS MOUNT

TOP VIEW - EAM MOUNT

MOUNTING DETAIL

MOUNTING DETAIL

2"(Typ.)






September 20, 2016 11:26 AM5 of 7

ACS/ACM - Aircraft Cable Single / Aircraft Cable Multiple FixturesStainless steel adjustable aircraft cable attaches to rotatable castings on Luminaire housing with chrome plated, low profile cable grippers. 4” diameter low profile canopies are provided as a standard. All canopies are painted semi-gloss white unless otherwise specified.


Nominal Length(MID)

Nominal Length(MID)

Nominal Length(MID)

Nominal Length(END)

OVER-ALL LENGTH




ACS - Aircraft Cable Mount, Single Fixture

Standard power feed location is on left side of fixture. If different power feed loca-tion is required, please request a modification.

Provided with 10' of aircraft cable.


24" 36" 48"

'A' 28-3/4" 40-3/4" 52-3/4"

'B' 26-3/4" 38-3/4" 50-3/4"

"A"

"A" "B" "A"

"C" "C" "C"

"C""C""C"

2"(TYP)

2"(TYP)

Ø4"CANOPY

Ø4"CANOPY

Ø2-3/4"

"B"

"B"

60°Rotation

FRONT VIEW - ACS MOUNT

FRONT VIEW - ACM MOUNT

Ø2-3/4"

60°Rotation


J-Box (by others)

J-Box (by others)


"A"

"A" "B" "A"

"C" "C" "C"

"C""C""C"

2"(TYP)

2"(TYP)

Ø4"CANOPY

Ø4"CANOPY

Ø2-3/4"

"B"

"B"

60°Rotation

FRONT VIEW - ACS MOUNT

FRONT VIEW - ACM MOUNT

Ø2-3/4"

60°Rotation


J-Box (by others)

J-Box (by others)


ACM - Aircraft Cable Mount, Multiple Fixture Run


Provided with 10' of aircraft cable.


24" 36" 48"

'A' 27-3/4" 39-3/4" 51-3/4"

'B' 26-3/4" 38-3/4" 50-3/4"

'C' 26-3/4" 38-3/4" 50-3/4"




September 20, 2016 11:26 AM6 of 7

PNS/PNM - Pendant Mount Single / Pendant Mount Multiple FixturesRigid steel stems conceal all leads and are painted to match Luminaire. 4” diameter low profile canopies are provided as a standard. All canopies are painted semi-gloss white unless otherwise specified.


Nominal Length(MID)

Nominal Length(MID)

Nominal Length(MID)

Nominal Length(END)

OVER-ALL LENGTH




PNS - Pendant Mount, Single FixtureStandard power feed location is on left side of fixture. If different power feed location is required, please request a modification.

6" MIN.24" MAX.

(SPECIFY)

"B"

"A"

"C" "C" "C"

"A" "B" "A"

10" MIN.4' MAX.

(SPECIFY)

"B"

"C""C""C"

Ø4"CANOPY

FRONT VIEW - PNM MOUNT

2"(TYP)

Ø2-3/4"

FRONT VIEW - PNS MOUNT

Ø2-3/4"

2"(TYP)

Ø4"CANOPY

MOUNTING DETAIL

MOUNTING DETAIL

60°Rotation

60°Rotation



J-Box (by others)

J-Box (by others)

6" MIN.24" MAX.

(SPECIFY)

"B"

"A"

"C" "C" "C"

"A" "B" "A"

10" MIN.4' MAX.

(SPECIFY)

"B"

"C""C""C"

Ø4"CANOPY

FRONT VIEW - PNM MOUNT

2"(TYP)

Ø2-3/4"

FRONT VIEW - PNS MOUNT

Ø2-3/4"

2"(TYP)

Ø4"CANOPY

MOUNTING DETAIL

MOUNTING DETAIL

60°Rotation

60°Rotation



J-Box (by others)

J-Box (by others)

PNM - Pendant Mount, Multiple Fixture RunStandard power feed location is on left side of fixture. If different power feed location is required, please request a modification.


24" 36" 48"

'A' 28-3/4" 40-3/4" 52-3/4"

'B' 26-3/4" 38-3/4" 50-3/4"


24" 36" 48"

'A' 27-3/4" 39-3/4" 51-3/4"

'B' 26-3/4" 38-3/4" 50-3/4"

'C' 26-3/4" 38-3/4" 50-3/4"




September 20, 2016 11:26 AM7 of 7

SR - Semi-Recessed Single Fixtures

SRS - Semi-Recessed, Single Fixture


12" 24" 36" 48"

'DIM. A' 15" 27" 39" 51"

'DIM. B' 13" 25" 37" 49"

'DIM. C' 14-1/8" 26-1/8" 38-1/8" 50-1/8"

LENGTH DIM "A" DIM "B" DIM "C"

2' 2'-3" 2'-1" 2'-2 1/8"3' 3'-3" 3'-1" 3'-2 1/8"4' 4'-3" 4'-1" 4'-2 1/8"

"DIM. A"OVERALL LENGTH

"DIM. B"LUMINAIRE LENGTH

"DIM. C"CUT OUT LENGTH

ELECTRICAL KNOCK-OUTS

Ø 2-3/4"

90°ROTATION

1-11/16"

5-3/16"ABOVE PLENUM

3-1/2"CUT OUT

THERMALPROTECTOR

linealed - insight lighting · linealed interior - integral power supply ... br = bronze n =...

Documents