lincoln electrode

STICK ELECTRODE PRODUCT CATALOG

For Mild and Low Alloy Steels

2

About The Lincoln Electric Company

Lincoln Electric is the world’s premier

manufacturer of welding equipment and

consumables. No company on earth is

more focused on the ever-changing

needs of the welding

professional. Our business is all about

helping companies make their welding

operations more effective, more

efficient, more profitable.

Lincoln is truly your “One Source” when

it comes to welding. We’re a company

that continually rededicates itself to the

equally important goals of exceptional

quality, and exceptional service. Our

field support team –– with hundreds of

field sales engineers and thousands of

knowledgeable and responsive Lincoln

distributors in countries all over the

world –– is the

largest in the industry.

Innovative thinking. A quality and

service-first attitude. Fresh

approaches to design, manufacturing,

and packaging. Worldwide strength.

That’s Lincoln Electric.

When great welders want great stick electrodes, they reachfor Lincoln!

We know you’re counting on your electrode. That’s why we’re sofocused on making the welding industry’s best-performing, mostvalue-packed line of stick electrode products. Before LincolnElectric’s name goes onto it, Lincoln Electric’s unparalleledwelding expertise goes into it.

Better Performance

Great puddle control and puddle clarity. Excellent wash-in char-acteristics. Low spatter. Good restrikeability. Those are the quali-ties you want in your electrode. And when you choose LincolnElectric stick products, those are the qualities you get.

Better Chemistry

At Lincoln, every pound of incoming raw steel to be used in ourelectrode products is meticulously checked for nineteen differentelements before it enters our manufacturing systems. Then, weverify the chemistry of our electrode at more than a dozen sepa-rate points during the manufacturing process.

Better Manufacturing Systems

Lincoln Electric’s sophisticated ISO 9001 manufacturing systemsand quality control systems are proven models of efficiency andcontrol. The results is an electrode of consistently superior quality— stick electrode after stick electrode.

Lincoln’s Stick Electrode

www.lincolnelectric.com

3

Contents Page

Product Introduction . . . 2-3

Electrode Selection Guide . . . . . . . . . . . . . . . 4-7

Fast Freeze,Out-of-positionStick Electrodes . . . . . .8-11

Fast Fill,High DepositionStick Electrodes . . . . .12-14

Fill Freeze,High SpeedStick Electrodes . . . . .15-17

Low HydrogenStick Electrodes . . . . .18-24

Low HydrogenLow Alloy SteelStick Electrodes . . . . .25-30

Pipe Welding Electrodes:

Fast Freeze,Out-of-positionPipe WeldingStick Electrodes . . . . .31-38

Low HydrogenPipe WeldingStick Electrodes . . . . .39-43

Packaging . . . . . . . . . . . . 44

Approvals . . . . . . . . . . . . 45

Weld MetalSelection Guide . . . . . 46-48

AWS Classifications . . 48-49

Storing and Re-dryingStick Electrodes . . . . .50-51

Better Product Breadth

With some forty distinct products to choose from, there’s a greatLincoln Electric stick electrode for whatever your job demands.This catalog will help you choose the right electrode for yourproject. Your local Lincoln Distributor can also be an excellentresource for you as you match job characteristics with electrodequalities.

It All Adds Up To Better Value

Industry-leading engineering and performance with less wasteequals improved productivity and higher product quality.

Built and Backed by the Best Welding Company on Earth

Lincoln Electric stick electrodes are engineered, manufacturedand backed by the most respected welding company on theplanet. When quality, consistency and value matter, the world’smost demanding welding professionals demand products byLincoln Electric.


4

Electrode AWS Recommended General PageName Number Polarity Description No.

Fleetweld® 35 E6011 AC Operators consistently give this electrode high marks. This 8DC± quality Lincoln product is a proven performer for AC pipe welding

applications and sheet metal welding. Fleetweld 35 is a great electrode to use on jobs where the steel isn’t 100% clean.

Fleetweld 35LS E6011 AC Great for making tack welds under Innershield® deposits. 9DC± Use Fleetweld 35LS with confidence on galvanized, plated,

dirty, painted, or greasy steel. It’s an outstanding stick choice for AC pipe welding, for applications that require deep penetration, and in jobs where x-ray quality welds are required in out-of-position applications.

Fleetweld 180 E6011 AC Got a small AC welder? Here’s your electrode! Fleetweld 180 10DC± offers excellent for excellent performance with power sources as

low as 50V open-circuit voltage (OCV). A great all purpose stick electrode with the ability to start easily on low open circuit voltagewelders.

Fleetweld 22 E6022 DC+ Developed specifically for roof decking and other applications 11AC where burnthrough spot welding on sheet metal is required.

Fleetweld 22 is perfect for galvanized or plated steel, as well ason steel that’s painted or dirty.

Jetweld® 1 E7024-1 AC When the project involves large welds, you just can’t pick 12DC± a better stick electrode! Operators appreciate Jetweld 1’s

smooth, ripple-free bead and high deposition rates. A great general purpose electrode for single or multi-pass applications.

Jetweld 2 E6027 AC When the job demands x-ray quality welds, high deposition 13DC± rates, and excellent wash-in, reach for Jetweld 2. We’ve

designed Jetweld 2 for peak performance on multiple pass welds,and fast-fill single pass welds.

Jetweld 3 E7024 AC Jetweld 3’s high deposition rates, and smooth ripple-free 14DC± beads make it a terrific choice for welding on mild and low

alloy steels. It’s especially effective for multi-pass welds and fast-fill single pass welds.

Fleetweld 7 E6012 DC- Got a variety of jobs that a single all-position electrode has 15AC to handle? Choose Lincoln Electric’s Fleetweld 7. This versatile,

high-speed, electrode is a real workhorse on sheet metal lap andfillet welds. It’s also a great choice for welding poor fit-up joints.

Fleetweld 37 E6013 AC Here’s a terrific all-position electrode for low amperage welding 16DC± on sheet metal — especially in applications where appearance

is important. We’ve designed Fleetweld 37 for excellent performancewith smaller AC welders with low open-circuit voltages. It’s anexcellent choice for jobs involving irregular or short welds that require a change in position.

STICK ELECTRODE SELECTION GUIDE

Fast Freeze, Out-of-Position, Mild Steel Stick Electrodes

Fast-Fill, High Deposition, Mild Steel Stick Electrodes

Fill Freeze, High Speed, Mild Steel Stick Electrodes


5


Fleetweld 47 E7014 AC Fleetweld 47 features high deposition rates for lightning-fast 17DC- performance. Operators love this easy-to-use, all-position electrode!

Choose Fleetweld 47 for sheet metal lap and fillet welds, generalpurpose plate welding and maintenance jobs. I

Lincoln 7018AC E7018 H8 AC AC? DC? This electrode performs beautifully either way! 18DC+ Lincoln 7018AC is a great choice for low open circuit voltage AC

power sources. Cold restrikes are no problem with this versatile, all-position electrode.

Jetweld LH®-70 E7018 H4R DC+ A top-choice electrode for welding on thick sections and 19AC restrained joints when cracking is an issue.

It’s also a good call when the project involves hard-to-weld steels.Jetweld LH-70 also offers high deposition rates.

Jet®-LH-78 MR E7018 H4R DC+ Great for jobs on mild steel and some high-strength low-alloy 20AC steels. It also tolerates high sulfur and high silicon steels.

Jet-LH 78 MR features higher tensile strength for the stress-relieved properties.

Jetweld LH-73 E7018 H8 AC Jetweld LH-73 delivers easy restriking for jobs that involve 21DC+ skip and tack welding. This dependable electrode is a favorite

of operators who weld on AC. It’s designed for optimumperformance on machines that use low open circuit AC voltage.

Excalibur® 7018 E7018 H4R DC+ There’s a long list of reasons why operators are so loyal to 22AC Excalibur 7018. They tell us they love the clean puddle, the square

coating burnoff, the easy all-position handling and the excellentwash-in characteristics. It’s a terrific choice for jobs that involvesteels with poor weldability.

Excalibur 7018-1 E7018-1 H4R DC+ When the job involves critical, out-of-position welding, 23AC reach for Lincoln Electric’s Excalibur 7018-1. It offers a

beautifully clean weld puddle, uniform slag follow, and superiorwash-in with no undercutting. Also great for welding on steels with marginal weldability.

Jetweld LH-3800 E7028 H8 AC If high production and low hydrogen deposits matter, count 24DC+ on Jetweld LH-3800. This electrode’s fast, easy restriking

characteristics make it perfect for skip and tack welding. Goodnotch toughness down to 0°F (-18°C).

Fill Freeze, High Speed Mild Steel Stick Electrodes (continued)

Low Hydrogen , Mild Steel Stick Electrodes



6


Jetweld LH-90 MR E8018-B2 H4R DC+ LH-90 MR was designed to meet the rigorous demands of 25E9018-G H4R AC high temperature, high pressure piping assignments. This

electrode offers a nominal 1-1/4% chromium, 1/2% molybdenum deposit and meets the requirements of high tensile (90,000 psi) steels. A good choice for use on many weathering steels.

Jet-LH 8018-B2 MR E8018-B2 H4R DC+ If your welding involves 1-1/4% chromium and 1/2% moly 26AC power pipe, tubes, boilers or castings, you’ll want

Jet-LH 8018-B2 MR as your welding partner. It offers a 1-1/4%chromium and 1/2% molybdenum deposit. Reach for this electrodewhen design temperatures exceed 850°F (450°C).

Jet-LH 8018-C1 MR E8018-C1 H4R DC+ Jet-LH 8018-C1 MR has outstanding impact properties. 27AC This is the ideal electrode for welding on equipment and pipe

that will transport liquid ammonia, propane and other gases.An excellent all-position electrode for applications requiringa nominal 2-1/4% nickel deposit.

Jet-LH 8018-C3 MR E8018-C3 H4R DC+ An excellent stick electrode with excellent impact properties. 28AC Jet-LH 8018-C3 MR produces a nominal 1% nickel deposit

that is a great fit for a wide range of welding applications.A good choice for welding on weathering type steels.

Jet-LH 9018-B3 MR E9018-B3 H4R DC+ Great low hydrogen stick electrode. For welding 2-1/4% 29AC chromium and 1% molybdenum steels when heat treating is

required. Good mechanical properties in the as-welded andstress relieved condition.

Jetweld LH-110M MR E11018-M H4R DC+ You’ll especially like this all-position electrode for jobs 30AC that call for welding high tensile steels such as T-1 steel

and HY-80. Jetweld LH-110M MR is also a great match for any general fabrication or repair where the weld deposit mustmeet AWS E11018-M. Also produces x-ray quality welds.

Fleetweld 5P E6010 DC+ Fleetweld 5P is a great choice for welding on dirty, rusty 31greasy or painted steel — especially in vertical or overheadapplications. This versatile, fast freeze electrode offers excellentarc stability. A long-time favorite among operators who handlecross-country and in-plant pipe welding.

Fleetweld 5P+ E6010 DC+ Lincoln’s Fleetweld 5P+ is ideal for on steel that’s less than 32clean. It’s a first choice for pipe welding, and vertical-up andoverhead plate welding.

Shield-Arc® 85 E7010-A1 DC+ Need a reliable, all-position stick electrode for high tensile 33steel pipe? Here’s your electrode! Shield-Arc 85 produces a 70,000 psi, 1/2% molybdenum weld deposit for use on 1/2% molybdenum pipe steels and API 5LX-42 through X-56line pipe.

Low Hydrogen, Low Alloy Steel Stick Electrodes

Fast Freeze, Out-of-Position Pipe Welding, Mild Steel and Low Alloy Steel Stick Electrodes



7

Fast Freeze, Out-of-Position Pipe Welding, Mild Steel and Low Alloy Steel Stick Electrodes (continued)

Low Hydrogen, Mild Steel and Low Alloy Steel Pipe Welding Stick Electrodes


Shield-Arc HYP E7010-G DC+ Shield-Arc HYP is a “first-choice” electrode for some of the 34world’s most demanding welding pros. For grades API 5LX-52through X-65. Shield-Arc HYP meets AWS E7010-P1 requirements.

Shield-Arc HYP+ E7010-P1 DC+ Tendency for “fingernailing” and arc stick have been virtually 35eliminated! Designed for all passes of API 5LX-52 through X-65high strength pipe. Provides the welder with a clean, visible weldpuddle and superior puddle control. A true E7010-P1 electrode.

Shield-Arc 70+ E8010-G DC+ Here’s an electrode that makes short work of even the most 36challenging high silicon pipe applications! Shield Arc 70+ is anoutstanding choice for API 5LX-56 through X-70 grade pipe, as well as for a wide range of sheet metal welding assignments. Lowtemperature impact properties are excellent.

Shield-Arc 80 E8010-G DC+ When your job involves vertical down welding on high strength 37pipe, reach for Lincoln’s Shield-Arc 80 electrode. This dependable stick electrode offers the perfect combination of excellent low temperature impact properties and deep penetration. It handles all passes on API 5LX-56 through X-70 pipe. Excellent “stacking” ability is another feature of SA-80, maximizing productivity on the job site. Also meets AWS E8010-P1 requirements.

Shield-Arc 90 E9010-G DC+ An all-position pipe electrode that’s a great choice when the 38task is vertical down welding on API 5LX-70 through X-80 pipe.SA-90 also performs well in situations where low hydrogen processes are not practical, and when welding on dirty steels.

Lincoln 16P E7016 H4 DC+ We designed this quality electrode for optimum performance 39AC for vertical up welding of pipe up to API 5LX-65 — especially

where a low hydrogen deposit is desired. Low temperatureimpact properties are excellent with this electrode. Lincoln 16P is also a good choice for heavy or highly restrained mild steel sections.

Lincoln 18P E8018-G H4 DC+ A real workhorse for vertical up welding jobs up to X-80 pipe! 40AC Lincoln 18P offers excellent low temperature impact properties

down to -50°F (-46°C). Also a good choice for heavy or highly restrained mild steel sections.

LH-D80 E8018-G DC+ Choose LH-D80 electrode when you need a dependable stick 41electrode for vertical down low hydrogen welding on pipe up to X-70. Operators appreciate the unique slag system that facilitates easy puddle control with virtually no slag interference.

LH-D90 E9018-G DC+ The product of choice for vertical down, low hydrogen pipe 42welding for fill and cap passes of high strength pipe up to X-80. Operators love this electrodes unique “hot start” tip with outstanding puddle control. Terrific low temperature impacts.

LH-D100 E10018-G DC+ When the job calls for vertical down, low hydrogen welding on 43X-80 pipe, operators the world over reach for this dependable Lincoln electrode. The unique “hot start” tip minimizes starting porosity. Terrific low temperature impacts and outstanding tensile strength.



8

FLEETWELD 35 AWS: E6011 Fast Freeze, Out-of-Position Mild Steel Stick Electrode

Operators consistently give thiselectrode high marks. This qualityLincoln product is a proven performerfor AC pipe welding applications andsheet metal welding. Fleetweld 35 is agreat electrode to use on jobs wherethe steel isn’t 100% clean.

ADVANTAGE LINCOLN

• Truly all-purpose, particularly goodfor vertical and overhead.

• Light slag with little slag interferencefor easy arc control.

• Deep penetration with highadmixture.

• Capable of x-ray quality welds,out-of-position.

• Manufactured under a qualitysystem certified to ISO 9001requirements.

TYPICAL APPLICATIONS

• Excellent for sheet metal welding onedge, corner and butt joints.

• Galvanized, plated, dirty, painted orgreasy steel which cannot becompletely cleaned.

• Pipe welding — cross country,in-plant, and non-critical small pipe.

• All-position welding.

Charpy V-NotchYield Strength Tensile Strength Elongation ft-lbs (Joules)

psi (MPa) psi (MPa) (%) @ -20ºF (-29ºC) @ -60°F (-51°C)

Required 48,000 (330) 60,000 (410) 22 20 (27)—

AWS E6011 min. min. min. min.

Test ResultsAs-welded 60,000 - 70,000 69,000 - 82,000

24-3434 - 76 18 - 50

(410 - 480) (475 - 565) (46 - 103) (24 - 68)

Stress-relieved 60,000 - 66,000 46,000 - 56,00028-36 — —

1 hr @ 1150°F (620°C) (410 - 455) (317 - 386)

%C %Mn %Si %S %P

RequirementsAWS E6011 Not Specified

Test Results .12-.18 .45-.60 .14-.20 .003-.015 .005-.015

(1) Typical all weld metal. NOTE: Preferred polarity is listed first.

(1) Typical all weld metal.

DEPOSIT COMPOSITION (1)

Diameter 10 Lb. (4.5 kg)50 Lb. (22.7kg)

Inches (mm) Easy Open CansCarton

(60 Lb. Master)

3/32 (2.4) ED010128 ED0281521/8 (3.2) ED010122 ED0281535/32 (4.0) ED010131 ED0281543/16 (4.8) ED0281557/32 (5.6) ED0281561/4 (6.4) ED028157

DIAMETERS / PACKAGING

MECHANICAL PROPERTIES (1) - As Welded per AWS A5.1-91

TYPICAL OPERATING PROCEDURES

Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

AC 50-85 75-120 90-160 120-200 150-260 190-300DC± 40-75 70-110 80-145 110-180 135-235 170-270

WELDING POSITIONS

CONFORMANCE

AWS A5.1(1): E6011ASME SFA-5.1: E6011ABS: E6011Lloyd’s: Grade 3M

1G 2G 3G ➔

3G➔

4G


(1) See Note 2 on page 49.

9

FLEETWELD 35LS AWS: E6011 Fast Freeze, Out-of-Position Mild Steel Stick Electrode



Required 48,000 (330) 60,000 (410) 22 20 (27)—



25 - 3424 - 50 19 - 46

(365 - 427) (448 - 524) (33 - 68) (26 - 62)

Stress-relieved 60,000 - 65,000 46,000 - 51,00028-33 — —

1 hour @ 1150°F (620°C) (414 - 448) (317 - 352)

%C %Mn %Si %S %P


Test Results .10 .60 .08 .015 .014




Diameter50 Lb. (22.7 kg)

Inches (mm)Carton

1/8 (3.2) ED0281585/32 (4.0) ED028159




Great for making tack welds underInnershield® deposits. UseFleetweld 35LS with confidence ongalvanized, plated, dirty, painted, orgreasy steel. It’s an outstanding stickchoice for AC pipe welding, forapplications that require deeppenetration, and in jobs where x-rayquality welds are required in out-of-position applications.

ADVANTAGE LINCOLN

• Truly all-purpose, particularly goodfor vertical and overhead.


• Deep penetration with highadmixture.






• Vertical up and overhead welding.

NOTE: Preferred polarity is listed first

Current (Amps)

Polarity1/8” 5/32”

(3.2mm) (4.0mm)

AC 80 - 130 120 - 160

DC± 70 - 120 110 - 150

CONFORMANCEAWS A5.1(1): E6011ASME SFA-5.1: E6011CSA W48.1: E41011

WELDING POSITIONS

1G 2G 3G ➔

3G➔

4G

• Joints requiring deep penetrationsuch as square edge groove welds.


(1)See Note 2 on page 49.

10


Got a small AC welder? Here’s yourelectrode! Fleetweld 180 offersexcellent arc stability for excellentperformance with power sources aslow as 50V open-circuit voltage (OCV).A great all purpose stick electrodewith the ability to start easily on lowopen circuit voltage welders.

ADVANTAGE LINCOLN

• Truly all-position, particularly goodfor vertical and overhead.


• Deep penetration with maximumadmixture.



• Great for use with small AC welders.

• Excellent for sheet metal welding onedge, corner and butt welds.




psi (MPa) psi (MPa) (%) @ -20ºF (-29ºC)

Required 48,000 (330) 60,000 (410) 22 20 (27)AWS E6011 min. min. min. min.


25 - 3526 - 53

(427 - 480) (523 - 579) (35 - 72)

%C %Mn %Si %S %P


Test Results .10-.18 .40-.70 .25-.50 .005-.020 .005-.015






NOTE: Preferred polarity is listed first.

(Current) AmpsPolarity 3/32” 1/8” 5/32”

(2.4mm) (3.2mm) (4.0mm)

AC 40 - 90 60 - 120 115- 150

DC± 40 - 80 55 - 110 105 - 135

Diameter 5 Lb. (2.3 kg) 10 Lb. (4.5 kg)50 Lb. (22.7kg)

Inches (mm) Carton Easy Open CansEasy Open Cans

(40 Lb. Master) (60 Lb. Master)

3/32 (2.4) ED021224 ED010108 ED0101101/8 (3.2) ED021225 ED010103 ED0101055/32 (4.0) ED021226 ED010114


CONFORMANCEAWS A5.1(1): E6011ASME SFA-5.1: E6011CSA W48.1: E41011

WELDING POSITIONS

1G 2G 3G ➔

3G➔

4G



11




Required—

60,000 (410)—

AWS E6022 min.

Test ResultsAs-welded

—75,000 - 82,000

— —(517 - 565)

%C %Mn %Si %S %P


Test Results .17 .93 .02 .009 .03


Developed specifically for roofdecking and other applicationswhere burnthrough spot welding onsheet metal is required. Fleetweld 22is perfect for galvanized or platedsteel, as well as on steel that’s paintedor dirty.


ADVANTAGE LINCOLN






• Designed specifically for roof deck-ing to beams with burn-throughspot welds and similar applications.


• Joints requiring deep penetrationsuch as square edge butt welds.

Diameter 50 Lb. (22.7 kg)Inches (mm) Carton

1/8 (3.2) ED0218965/32 (4.0) ED021895





Current (Amps)

Polarity1/8” 5/32”

(3.2mm) (4.0mm)

DC+ 110-150 150-180

AC 110-150 150-180

WELDING POSITIONS

CONFORMANCE

AWS A5.1(1): E6022ASME SFA-5.1: E6022

1G


(1)See Notes 1 and 2 on page 49.

See Note 1 on page 49.

12

JETWELD 1 AWS: E7024 -1 Fast Fill, High Deposition, Mild Steel Stick Electrode

When the project involves largewelds, you just can’t pick a betterstick electrode! Operators appreciateJetweld 1’s, smooth, ripple-free beadand high deposition rates. A greatgeneral purpose electrode for single ormulti-pass applications.

ADVANTAGE LINCOLN

• Excellent deposition rates.

• Smooth, ripple-free beads withminimal spatter.

• Easy slag removal.

• Shallow penetration for minimumadmixture.

• Produces x-ray quality welds.



• Best choice when large welds arerequired.

• Flat and slightly downhill (15° max.)positions.

• For multiple pass welds includingfillets and deep groove joints.

CONFORMANCE

AWS A5.1(1): E7024-1ASME SFA-5.1: E7024-1ABS: E7024-1Lloyd’s: Grade 1MDNV: Grade 1GL: Grade 1BV: Grade 1CSA W48.1: E48024-1


psi (MPa) psi (MPa) (%) @ 0°F (-18°C)

Required AWS E7024-1As-welded 58,000 (330) 70,000 (410) 22 20 (27)

min. min. min. min.


24 - 3121 - 44

(448 - 545) (510 - 593) (29 - 60)

Stress-relieved 63,000 - 66,000 74,000 - 79,00023 - 27

25 - 351 hr @ 1150°F (620°C) (434 - 455) (510 - 545) (34 - 47)

%C %Mn %Si %S %P %Cr %Mo %Ni %V

Requirements—

1.25 .90— —

.20 .30 .20 .08AWS E7024-1 max. max. max. max. max. max.

Test Results .05-.10 .70-1.00 .30-.90 .005-.020 .010-.020 .01-.06 <.01 .05-.17 .01-.03





3/32 (2.4) ED0103691/8 (3.2) ED0103625/32 (4.0) ED0103723/16 (4.8) ED0103667/32 (5.6) ED0103751/4 (6.4) ED010360



Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

AC 65-120 115-175 180-240 240-300 300-380 340-440

DC± 60-110 100-160 160-215 220-280 270-340 320-400



WELDING POSITIONS

1G 2F 2G



13

JETWELD 2 AWS: E6027 Fast Fill, High Deposition, Mild Steel Stick Electrode

When the job demands x-rayquality welds, high depositionrates, and excellent wash-in, reachfor Jetweld 2. We’ve designedJetweld 2 for peak performance onmultiple pass welds, and fast-fill singlepass welds.

ADVANTAGE LINCOLN



• Easy slag removal — heavy slagtends to peel off.




• Made especially for welding mildand low alloy steels.

• Flat and horizontal positions.

• For multiple pass welds includingfillets and deep groove butt joints.

• “Fast-Fill” single pass welds such asproduction fillets and laps.

CONFORMANCE

AWS A5.1: E6027ASME SFA-5.1: E6027ABS: E6027Lloyd’s: Grade 3MDNV: Grade 3GL: Grade 3BV: Grade 3



Required AWS E6027As-welded 48,000 (330) 60,000 (410) 22 20 (27)

—min. min. min. min.


26 - 3528 - 54 16 - 41

(365 - 410) (427 - 496) (38 - 73) (22 - 56)Stress-relieved 50,000 - 59,000 62,000 - 70,000

25 - 32 — —1 hour @ 1150°F (620°C) (344 - 407) (427 - 480)

%C %Mn %Si %S %P

Requirements AWS E6027 Not Specified

Test Results .05-.10 .65-.95 .15-.30 .010-.025 .015-.025





5/32 (4.0) ED0105023/16 (4.8) ED0105011/4 (6.4) ED010500



Current (Amps)Polarity 5/32” 3/16” 1/4”

(4.0mm) (4.8mm) (6.4mm)

AC 190 - 240 250 - 300 350 - 450DC± 175 - 215 230 - 270 315 - 405



WELDING POSITIONS

1G 2F 2G


14

Jetweld 3’s high deposition rates,and smooth ripple-free beads makeit a terrific choice for welding onmild and low alloy steels. It’sespecially effective for multi-passwelds and fast-fill single pass welds.

ADVANTAGE LINCOLN



• Easy slag removal — heavy slagtends to peel off.




• Made especially for welding mildand low alloy steels.

• Flat and slightly downhill (15° max.)positions.

• For multiple pass welds includingfillets and deep groove butt joints.

• “Fast-Fill” single pass welds such asproduction fillets and laps.

CONFORMANCE

AWS A5.1(1): E7024ASME SFA-5.1: E7024ABS: E7024DNV: Grade 1GL: Grade 1BV: Grade 1


psi (MPa) psi (MPa) (%) @ 70°F (21°C) @ 20°F (-6°C)

Required AWS E7024As-welded 58,000 (400) 70,000 (480) 17

min. min. min.


17 - 2938 - 52 25 - 35

(462 - 517) (538 - 655) (51 - 70) (34 - 47)

Stress-relieved 65,000 - 71,000 77,000 - 81,00022 - 23 —

24 - 331 hour @ 1150°F (620°C) (448 - 489) (531 - 558) (33 - 45)


Requirements—

1.25 .90— —

.20 .30 .30 .08AWS E7024 max. max. max. max. max. max.

Test Results .05-.10 .60-1.00 .60-.90 .005-.020 .010-.020 .01-.06 <.01 .05-.15 .01-.05





3/32 (2.4) ED0105291/8 (3.2) ED0105215/32 (4.0) ED0105333/16 (4.8) ED0105257/32 (5.6) ED0105361/4 (6.4) ED010518





WELDING POSITIONS

1G 2F 2G

Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

AC 65-120 115-175 180-240 240-315 300-380 350-450

DC± 60-110 100-160 160-215 215-285 270-340 315-405

JETWELD 3 AWS: E7024 Fast Fill, High Deposition, Mild Steel Stick Electrode




15

FLEETWELD 7 AWS: E6012 Fill Freeze, High Speed Mild Steel Stick Electrode

Got a variety of jobs that a singleall-position electrode has to handle?Choose Lincoln Electric’s Fleetweld 7.This versatile, high-speed electrode isa real workhorse on sheet metal lapand fillet welds. It’s also a great choicefor welding poor fit-up joints.

ADVANTAGE LINCOLN

• An all position electrode for thewelding of mild steel.

• Excellent choice for sheet metal lapand fillet welds, especially withdiameters up to 3/16” (4.8 mm).

• Superb fast follow characteristics,and operation on poor fit-up joints.



• Sheet metal lap and fillet welds.

• Irregular or short welds that changedirection or position, and downhillfillets and laps.

• General purpose plate welding inproduction and maintenance,especially when one electrode isused for a variety of work.

WELDING POSITIONS

CONFORMANCE

AWS A5.1(1): E6012ASME SFA-5.1: E6012ABS: E6012


psi (MPa) psi (MPa) (%) @ 0°F (-18°C)


min. min. min.

Test ResultsAs-welded 67,000 - 70,000 73,000 - 78,000 22 - 26 19 - 35

(462 - 480) (503 - 538) (26 - 47)

Stress-relieved 55,000 - 73,000 67,000 - 84,00017 - 24 —

1 hr @ 1150°F (620°C) (379 - 503) (462 - 483)

%C %Mn %Si %S %P


Test Results .05 - .15 .30 - .45 .20 - .35 .005 - .015 .005 - .015





1/8 (3.2) ED0103195/32 (4.0) ED0103273/16 (4.8) ED0103237/32 (5.6) ED0103301/4 (6.4) ED010315



Current (Amps)

Polarity1/8” 5/32” 3/16” 7/32” 1/4”

(3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

DC- 80-135 110-180 155-250 225-295 245-325

AC 90-150 120-200 170-275 250-325 275-360



1G 2F 2G

3G ➔ 4G




16


Here’s a terrific all-positionelectrode for low amperage weldingon sheet metal — especially inapplications where appearance isimportant. We’ve designed Fleetweld37 for excellent performance withsmaller AC welders with low opencircuit voltages. It’s an excellentchoice for jobs involving irregular orshort welds that require a change inposition.

ADVANTAGE LINCOLN


• Excellent choice for sheet metal lapand fillet welds.

• Superior slag control, which makesit a great choice for vertical down.




• Irregular or short welds that changedirection or position, and downhillfillets and laps.

• General purpose plate welding andmaintenance.

CONFORMANCEAWS A5.1(1): E6013ASME SFA-5.1: E6013ABS: E6013Lloyd’s: Grade 3MDNV: Grade 1GL: Grade 1BV: Grade 1CSA W48.1: E41013


psi (MPa) psi (MPa) (%) @ 0°F (-18°C)


min. min. min.


25 - 3225 - 56

(392 - 480) (455 - 538) (34 - 76)

Stress-relieved 55,000 - 68,000 67,000 - 74,00017 - 29 —

1 hour @ 1150°F (620°C) (379 - 470) (460 - 510)



Diameter 5 Lb. (2.3 kg) 10 Lb. (4.5 kg)50 Lb. (22.7 kg)

Inches (mm) Carton Easy Open CansCarton


1/16 (1.6) ED0243645/64 (2.0) ED023491 ED0101703/32 (2.4) ED021218 ED010159 ED0101611/8 (3.2) ED021219 ED010151 ED0101535/32 (4.0) ED021220 ED010164 ED0101653/16 (4.8) ED010156


%C %Mn %Si %S %P


Test Results .05-.10 .35-.50 .15-.25 .005-.020 .005-.020



Current (Amps)

Polarity1/16” 5/64” 3/32” 1/8” 5/32” 3/16”

(1.6mm) (2.0mm) (2.4mm) (3.2mm) (4.0mm) (4.8mm)

AC 20-45 50-80 75-105 110-150 160-200 205-260DC± 20-45 45-75 70-95 100-135 145-180 190-235



WELDING POSITIONS

1G 2F 2G

3G➔

4G




17


Fleetweld 47 features highdeposition rates for lightning-fastperformance. Operators love thiseasy-to-use, all-position electrode!Choose Fleetweld 47 for sheet metallap and fillet welds, general purposeplate welding and maintenance jobs.

ADVANTAGE LINCOLN


• Easy to use with excellent operatorappeal.

• Excellent choice for sheet metal lapand fillet welds, especially diametersup to 3/16” (4.8 mm).




• Generally used for thicker steel thanE6012 and E6013 electrodes.

• General purpose plate welding andmaintenance.

CONFORMANCEAWS A5.1(1): E7014ASME SFA-5.1: E7014ABS: E7014Lloyd’s: Grade 1MDNV: Grade 1GL: Grade 1BV: Grade 1CSA W48.1: E43014


psi (MPa) psi (MPa) (%) @ 70°F (21°C)


min. min. min.


20 - 29 51 (69)(434 - 510) (517 - 572)

Stress-relieved 55,000 - 70,000 67,000 - 77,00024 - 30 51 (69)

1 hr @ 1150°F (620°C) (379 - 480) (461 - 530)



Diameter 5 Lb. (2.3 kg) 10 Lb. (4.5 kg) 50 Lb.Inches (mm) Carton Easy Open Cans (22.7 kg)

(40 Lb. Master) (60 Lb. Master) Carton

3/32 (2.4) ED021230 ED0101891/8 (3.2) ED021231 ED010182 ED0101835/32 (4.0) ED021232 ED0101933/16 (4.8) ED0101867/32 (5.6) ED010195



Requirements—

1.25 .90— —


Test Results .06-.11 .25-.55 .40-.65 .01-.02 .005-.010 .02-.06 .005-.02 .02-.10 .01-.02



Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 7/32”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm)

AC 80-100 110-160 150-225 200-280 260-340

DC± 75-95 100-145 135-200 185-235 235-305



WELDING POSITIONS

1G 2F 2G

3G ➔ 4G




18

LINCOLN 7018 AC AWS: E7018 H8 Low Hydrogen, Mild Steel Stick Electrode



Required 58,000 (400) 70,000 (480) 22 20 (27)AWS E7018 H8 min. min. min. min.


22 - 3220 - 56

(400 - 593) (480 - 600) (27 - 76)



5 Lb. (2.3 kg)Diameter CartonInches (mm) (40 Lb. Master)

3/32 (2.4) ED0212361/8 (3.2) ED0212375/32 (4.0) ED021238



Current (Amps)

Polarity3/32” 1/8” 5/32”

(2. mm) (3.2mm) (4.0mm)

AC 75-120 105-150 130-200DC+ 70-115 100-140 120-185

AC? DC? This electrode performsbeautifully either way! Lincoln 7018AC is a great choice forlow open circuit voltage AC powersources. Cold restrikes are noproblem with this versatile, all-positionelectrode.

ADVANTAGE LINCOLN

• Designed for welding mild steel andmany low alloy steels.

• All position welding with gooddeposit rates.

• Flat or slightly convex beads havedistinct ripples with little spatter.

• Good low current and low opencircuit voltage operation.



• Excellent for tack and skip weldsdue to easy restriking.

• General purpose low hydrogenelectrode for AC application

• Single pass fillet welds on mild steelplate.

WELDING POSITIONS

CONFORMANCE

AWS A5.1: E7018ASME SFA-5.1: E7018CSA W48.1: E48018




Requirements—

1.60 .75— —


Test Results .04-.06 1.10-.150 .20-.50 .005-.015 .010-.020 .02-.05 .01-.03 .01-.05 .01-.03


1G 2F 2G

3G ➔ 4G


19

JETWELD LH-70 AWS: E7018 H4R Low Hydrogen, Mild Steel Stick Electrode

A top-choice electrode for weldingon thick sections and restrainedjoints when cracking is an issue. It’salso a good call when the projectinvolves hard-to-weld steels. JetweldLH-70 also offers high depositionrates.

ADVANTAGE LINCOLN

• Designed for welding mild steel andhigh strength low alloy steels. Also,tolerates high sulfur and high siliconsteels, which have poor weldability.

• Capable of x-ray quality andexcellent notch toughness.

• Low hydrogen may reduce the needfor preheat or postheat.

• Shipped in hermetically sealedcontainers, which can be storedindefinitely in normal conditions,without danger of moisture pickup.



• Structural steel and bridges.

• Thick section and restrained jointswhen shrinkage tends to causeweld cracking.

• Cold rolled steel, re-rolled rails, free-machining steels containing highsulfur or selenium, spring steels,steel to be porcelain-enameled.

• Hard-to-weld steels.

CONFORMANCE

AWS A5.1: E7018 H4RASME SFA-5.1: E7018 H4RABS: E7018Lloyd’s: 3M, 3YMH5DNV: 3Y40H5GL: 3YH5BV: 3YHHHMilitary: MIL-E-22200/1; MIL-7018CSA W48.1: E48018-1



Required 58,000 (400) 70,000 (480) 22 20 (27)—



22 - 3445 - 158 31 - 136

(410 - 530) (503 - 600) (61 - 214) (42 - 184)


Diameter 10 Lb. (4.5 kg)25 Lb. (11.3 kg) 50 Lb. (22.7 kg)

Inches (mm) Easy Open CansEasy Open Cans Easy Open Cans

(60 Lb. Master)

3/32 (2.4) ED010566 ED010571 ED0105681/8 (3.2) ED010560 ED0105615/32 (4.0) ED010574 ED0105753/16 (4.8) ED0105647/32 (5.6) ED0105771/4 (6.4) ED0105585/16 (7.9) ED010573




Current (Amps)Inches 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 5/16”(mm) (2.4) (3.2) (4.0) (4.8) (5.6) (6.4) (7.9)

DC+ 70-100 90-150 120-190 170-280 210-330 290-430 375-500

AC 80-120 110-170 135-225 200-300 260-380 325-440 400-530



WELDING POSITIONS

1G 2F 2G

3G ➔ 4G


Requirements—

1.60 .75— —

.20 .30 .30 .08AWS E7018 H4R max. max. max. max. max. max.

Test Results .035-.081 .89-1.20 .35-.66 .023-.029 .008-.013 .02-.06 .01-.03 .03-.11 .005-.040



20

JET-LH 78 MR AWS: E7018 H4R Low Hydrogen, Mild Steel Stick Electrode



Required 58,000 (400) 70,000 (480) 22 20 (27)—


Test ResultsAs-welded 67,000 - 80,000 75,000 -90,000

22 - 3450 - 150 42 - 100

(462 - 552) (517 - 620) (68 - 203) (57 - 136)

Stress relieved 56,000 - 73,000 71,000 - 85,00027 - 33

50 - 112 14 - 11510 hrs @ 1150°F (620°C) (386 - 503) (489 - 586) (68 - 152) (19 - 156)



10 Lb. (4.5 kg) 12 Lb. (5.4 kg)50 Lb. (22.7 kg)5 Lb. (2.3 kg)

Easy Open Easy Open Easy Open

DiameterCarton

Cans CansCans

Inches (mm)(40 Lb. Mstr)

(60 Lb. Mstr) (72 Lb. Mstr)

3/32 (2.4) ED021242 ED015766 ED0151611/8 (3.2) ED021243 ED015729 ED0151985/32 (4.0) ED021244 ED010799 ED0151413/16 (4.8) ED010793 ED0151867/32 (5.6) ED017287 ED0152581/4 (6.4) ED015383



Current (Amps)3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

Polarity (2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

DC+ 85-110 110-160 130-200 180-270 250-330 300-400

AC — 120-170 140-230 210-290 270-370 325-420


Great for jobs on mild steel andsome high-strength low-alloysteels. It also tolerates high sulfur andhigh silicon steels. Jet-LH 78 MRfeatures higher tensile strength for thestress-relieved properties.

ADVANTAGE LINCOLN

• Designed for welding mild steel andhigh strength low alloy steels. Also,tolerates high sulfur and high siliconsteels, which have poor weldability.

• Capable of x-ray quality andexcellent notch toughness.

• Low hydrogen may reduce the needfor preheat or postheat.





• Cold rolled steel, re-rolled rails, free-machining steels containing highsulfur or selenium, spring steels,steel to be porcelain-enameled.

• Hard-to-weld steels.

CONFORMANCE

AWS A5.1: E7018 H4RASME SFA-5.1: E7018 H4RABS: E7018Lloyd’s: 3M, 3YMH5DNV: 3YH5GL: 3YH5BV: 3YHHHCSA W48.1: E48018-1


WELDING POSITIONS

1G 2F 2G

3G ➔ 4G


Requirements—

1.60 .75— —


Test Results .04-.08 .90-1.30 .35-.65 .010-.020 .006-.015 .02-.06 .01-.02 .03-.07 .01-.03



21

JETWELD LH-73 AWS: E7018 H8 Low Hydrogen, Mild Steel Stick Electrode

ADVANTAGE LINCOLN

• Designed for welding mild steel, lowalloy steels and steels of poorweldability.

• Capable of x-ray quality and goodnotch toughness.

• Designed for use on small ACmachines, where low open circuitvoltages are used.




• Excellent for tack and skip weldsdue to easy restriking.

• General purpose low hydrogenelectrode for AC application.

• Single and multiple pass fillet weldson mild steel plate.

WELDING POSITIONS

CONFORMANCE

AWS A5.1: E7018 H8ASME SFA-5.1: E7018 H8ABS: E7018CSA W48.1: E48018





22 - 3220 - 56

(400 - 593) (480 - 600) (27 - 76)



Diameter 50 Lb. (22.7 kg)Inches (mm) Easy Open Cans

3/32 (2.4) ED0107141/8 (3.2) ED0107115/32 (4.0) ED010717


Current (Amps)

Polarity3/32” 1/8” 5/32”

(2.4mm) (3.2mm) (4.0mm)

AC 70 - 100 95 - 135 140 - 200

DC+ 65 - 95 90 - 130 130 - 190




Jetweld LH-73 delivers easyrestriking for jobs that involve skipand tack welding. This dependableelectrode is a favorite of operatorswho weld on AC. It’s designed foroptimum performance on machinesthat use low open circuit ACvoltage.


Requirements—

1.60 .75— —

.70 .30 .30 .08AWS E7018 H8 max. max. max. max. max. max.

Test Results .04-.06 1.09-1.60 .40-.65 .007-.012 .010-.018 .04-.06 .01-.03 .02-.04 .02-.04


1G 2F 2G

3G ➔ 4G 5G ➔


22

EXCALIBUR 7018 AWS: E7018 H4R Low Hydrogen, Mild Steel Stick Electrode

ADVANTAGE LINCOLN


• Capable of x-ray quality welds andexcellent notch toughness.

• Ability to tie-in to side walls withoutundercutting, especially for criticalout-of-position applications.

• Clean weld puddle and uniform slagfollow make it easy for the welder to“see” and carry the puddle.




• All-position welding of mild steels,some high strength, low alloy steels.

• Tolerates steels with poorweldability, such as high sulfur andhigh silicon steels.

• Welding of piping, fittings, andtie-ins in the petrochemical andpower generation industries.

CONFORMANCE

AWS A5.1: E7018, E7018 H4RASME SFA-5.1: E7018, E7018 H4RABS: E7018M, 3, 3YH5Lloyd’s: 3M, 3YMH5DNV: 3YH5GL: 3YH5BV: 3YHHHCSA W48.1: E48018




Required 58,000 (400) 70,000 (480) 22 20 (27)—

AWS E7018 H4R min. min. min. min.


32 - 35110-220 52 - 97

(455 - 510) (545 - 600) (149 - 298) (70 - 131)

Stress relieved 56,000 - 64,000 72,000 - 74,00032 - 38

204 - 263 232 - 2541 hour @ 1150°F (620°C) (386 - 441) (496 - 510) (276 - 356) (314 - 344)


Diameter 10 Lb. (4.5 kg)50 Lb. (22.7 kg)

Inches (mm) Easy Open CansEasy Open Cans

(60 Lb. Master)

3/32 (2.4) ED028481 ED0282801/8 (3.2) ED028482 ED0282815/32 (4.0) ED028483 ED0282823/16 (4.8) ED028484 ED0282837/32 (5.6) ED0289171/4 (6.4) ED028918



Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

DC+ 70-110 90-160 130-210 180-300 250-330 300-400

DC- 70-110 90-160 130-210 180-300 250-330 300-400

AC 80-120 100-160 140-210 200-300 270-370 325-420


WELDING POSITIONS

1G 2F 2G

3G ➔ 4G 5G ➔

There’s a long list of reasons whyoperators are so loyal to Excalibur7018. They tell us they love the cleanpuddle, the square coating burnoff,the easy all-position handling and theexcellent wash-in characteristics. It’s aterrific choice for jobs that involvesteels with poor weldability.



Requirements—

1.60 .75— —


Test Results .04-.08 1.15-1.50 .30-.65 .005-.015 .010-.020 .01-.05 .01-.05 .01-.05 .001-.010



23

EXCALIBUR 7018-1 AWS: E7018-1 H4R Low Hydrogen, Mild Steel Stick Electrode



psi (MPa) psi (MPa) (%) @ -50°F (-46°C)

Required 58,000 (400) 70,000 (480) 22 20 (27)AWS E7018-1 H4R min. min. min. min.


65,000 - 79,000 76,000 - 91,00031 - 35

73 - 130(448 - 545) (524 - 627) (99 - 176)

Stress relieved 56,000 - 72,000 73,000 - 86,00029 - 36

125 - 2631 hour @ 1150°F (620°C) (386 - 496) (503 - 593) (169 - 356)



When the job involves critical,out-of-position welding, reach forLincoln Electric’s Excalibur 7018-1.It offers a beautifully clean weldpuddle, uniform slag follow, andsuperior wash-in with no undercutting.Also, great for welding on steels withmarginal weldability.

ADVANTAGE LINCOLN


• Capable of x-ray quality welds withexcellent notch toughness.

• Ability to tie-in to side walls withoutundercutting, especially for criticalout-of-position applications.

• Clean weld puddle and uniform slagfollow make it easy for the welder to“see” and carry the puddle.



• Structural steels and bridges.

• All position welding of mild steels, andsome high strength, low alloy steels.

• Tolerates steels with poorweldability, such as high sulfur andhigh silicon steels.

• Welding of piping, fittings, and tie-ins in the petrochemical and powergeneration industries.

CONFORMANCE

AWS A5.1: E7018-1, E7018 H4RASME SFA-5.1: E7018-1, E7018 H4RABS: E7018M, 3, 3YH5Lloyd’s: 3M, 3YMH5DNV: 3YH5GL: 3YH5BV: 3YHHHCSA W48.1: E48018-1



(60 Lb. Master)

3/32 (2.4) ED028701 ED0287001/8 (3.2) ED028703 ED0287025/32 (4.0) ED028705 ED0287043/16 (4.8) ED0287067/32 (5.6) ED0289191/4 (6.4) ED028920


Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

DC+ 70-110 90-160 130-210 180-300 250-330 300-400

DC- 70-110 90-160 130-210 180-300 250-330 300-400

AC 80-120 100-160 140-210 200-300 270-370 325-420



WELDING POSITIONS

1G 2F 2G

3G ➔ 4G 5G ➔


Requirements—

1.60 .75— —

.20 .30 .30 .08AWS E7018-1 H4R max. max. max. max. max. max.

Test Results .04-.08 1.15-1.50 .30-.65 .005-.015 .010-.020 .01-.05 .01-.05 .01-.05 .001-.010



24

JETWELD LH-3800 AWS: E7028 H8 Low Hydrogen, Mild Steel Stick Electrode

If high production and low hydrogendeposits matter, count on JetweldLH-3800. This electrode’s fast, easyrestriking characteristics make itperfect for skip and tack welding.Good notch toughness down to0°F (-18°C).

ADVANTAGE LINCOLN

• High speed, high deposition electrodedesigned for low hydrogenapplications.

• Excellent restriking characteristicsmakes LH-3800 ideal for skip andtack welding.

• Capable of x-ray quality welds withgood notch toughness.



• Used for high productionapplication, in the horizontal orflat positions.

• Excellent for tacking or skip welding.

• For mild steels, low alloy steels andsteels of poor weldability.

• Tolerates high sulfur and high siliconsteels.

CONFORMANCE

AWS A5.1: E7028 H8ASME SFA-5.1: E7028 H8ABS: E7028Lloyd’s: 2,2H10 2M, 2YMH10DNV: 2YHHBV: 2YHHGL: 2YH10CSA W48.1: E48028



psi (MPa) psi (MPa) (%) @ 70°F (21°C) @ 0°F (-18°C)

Required 58,000 (400) 70,000 (480) 22—

20 (27)AWS E7028 H8 min. min. min. min.


66,000 - 79,000 76,000 - 91,00022 - 31

63 - 99 24 - 63(455 - 545) (524 - 627) (85 - 134) (33 - 85)

Stress relieved 73,000 - 77,000 84,000 - 89,00025 - 29

80 - 90—

1 hr @ 1150°F (620°C) (503 - 530) (579 - 614) (108 - 122)



5/32 (4.0) ED0105473/16 (4.8) ED0105457/32 (5.6) ED010548



Current (Amps)

Polarity5/32” 3/16” 7/32”

(4.0mm) (4.8mm) (5.6mm)

AC 180 - 270 240 - 330 275 - 410

DC+ 170 - 240 210 - 300 260 - 380



WELDING POSITIONS

1G 2F 2G


Requirements—

1.60 .90— —


Test Results .05-.11 .70-1.15 .25-.50 .022-.026 .014-.016 .01-.06 .005-.010 .10-.18 .01-.02



25

JETWELD LH-90 MR AWS: E8018-B2 H4R, E9018-G H4R Low Hydrogen, Low Alloy Steel Stick Electrode

Jetweld LH-90 MR was designed tomeet the rigorous demands of hightemperature, high pressure pipingassignments. This electrode offers anominal 1-1/4% chromium and 1/2%molybdenum deposits and meets therequirements of high tensile (90,000psi) steels. A good choice for use onmany weathering steels.

ADVANTAGE LINCOLN

• Capable of producing 1-1/4%chromium, 1/2% molybdenumdeposit commonly required for hightemperature, high pressure pipe.


• Also meets requirements of E9018-Gfor welding some high strengthsteels — 90,000 psi tensile.



• Primarily designed for all positionfabrication and repair welding of thealloy steels requiring specificmechanical or chemical properties.

CONFORMANCE

AWS A5.5: E8018-B2 H4R, E9018-G H4R

ASME SFA-5.5: E8018-B2, E9018-G H4R



Required E8018-B2Stress relieved 67,000 (460) 80,000 (550) 19 — —1 hr @1275°F (690°C) min. min. min.

Test ResultsStress relieved 69,000 - 93,000 84,000 - 98,000

20 - 2712 - 74 10 - 49

1 hr @ 1275°F (690°C) (476 - 641) (579 - 680) (16 - 100) (14 - 66)




1/8 (3.2) ED0154365/32 (4.0) ED0154263/16 (4.8) ED015437


Current (Amps)

Polarity1/8” 5/32” 3/16”

(3.2mm) (4.0mm) (4.8mm)

DC+ 110 - 150 130 - 190 180 - 270

AC 120 - 170 140 - 225 210 - 290

%C %Mn %Si %S %P %Cr %Mo

Requirements.05-.12

.90 .80 .03 .031.00-1.50 .40-.65

AWS E8018-B2 H4R max. max. max. max.

Test Results .05-.07 .45-.71 .31-.57 .005-.019 .009-.016 1.04-1.30 .42-.52





WELDING POSITIONS

1G 2F 2G

3G ➔ 4G


26

JET LH 8018-B2 MR AWS: E8018-B2 H4R Low Hydrogen, Low Alloy Steel Stick Electrode

If your welding involves 1-1/4%chromium and 1/2% molybdenumpower pipe, tubes, boilers orcastings, you’ll want Jet-LH8018-B2 MR as your welding partner. Itoffers a nominal 1-1/4% chromiumand 1/2% molybdenum deposit.Reach for this electrode when designtemperatures exceed 850°F (450°C).

ADVANTAGE LINCOLN

• Capable of producing 1-1/4%chromium, 1/2% molybdenumdeposit for welding power piping,tubes, boilers and castings withdesign temperatures above 850°F.


• Produces x-ray quality welds andexcellent notch toughness.



• Primarily designed for all positionfabrication or repair welding ofpower piping, tubes, boilers andcastings of creep resistant steels.

• May also be used in the marineequipment, chemical processing,utilities and shipbuilding industries.

CONFORMANCE

AWS A5.5: E8018-B2 H4RASME SFA-5.5: E8018-B2 H4R


psi (MPa) psi (MPa) (%) @ -20°F (-29°C) @ -50°F (-46°C)

Required E8018-B2 H4RStress relieved 67,000 (460) 80,000 (550) 19 — —1 hr @ 1275°F (690°C) min. min. min.


25 - 2863 - 108 32 - 52

1 hr @ 1275°F (690°C) (558 - 641) (641 - 710) (85 - 146) (43 - 70)(1) Typical all weld metal.


Diameter 25 Lb. (11.3 kg) 50 Lb. (22.7 kg)Inches (mm) Easy Open Cans Easy Open Cans

3/32 (2.4) ED0234721/8 (3.2) ED0234735/32 (4.0) ED023474


Current (Amps)

Polarity3/32” 1/8” 5/32”

(2.4mm) (3.2mm) (4.0mm)

DC+ 70 - 110 100 - 140 120 - 190

AC 85 - 120 110 - 150 135 - 200

%C %Mn %Si %S %P %Cr %MoRequirements

AWS E8018-B2 H4R .05-.12.90 .80 .03 .03

1.00-1.50 .40-.65max. max. max. max.

Test Results .060-.085 .65-.80 .50-.75 .008-.012 .013-.016 1.15-1.30 .43-.51





WELDING POSITIONS

1G 2F 2G

3G➔

4G 5G ➔


27

Jet-LH 8018-C1 MR AWS: E8018-C1 H4R Low Hydrogen, Low Alloy Steel Stick Electrode

Jet-LH 8018-C1 MR has outstandingimpact properties. This is the idealelectrode for welding on equipmentand pipe that will transport liquidammonia, propane and other gases.An excellent all-position electrode forapplications requiring a nominal 2-1/4% nickel deposit.

ADVANTAGE LINCOLN

• All position welding — weld metalfreezes rapidly even though slagremains relatively fluid.




• Primarily designed for all positionfabrication or repair of liquidpropane tanks, piping and pressurevessels.

• Refrigerated ammonia tanks andbarges, and heavy constructionequipment.

• Liquefied gas storage andtransportation equipment.

CONFORMANCE

AWS A5.5: E8018-C1 H4RASME SFA-5.5: E8018-C1 H4RABS: E8018-C1 H4RCSA W48.3: E55018-C1



Required AWS E8018-C1Stress relieved 67,000 (460) 80,000 (550) 19 — 20 (27)1 hour @ 1125°F ±25°F min. min. min. min.

(610°C ±14°C)


25 - 3271 - 109 30 - 85

1 hour @ 1150°F (620°C) (462 - 558) (558 - 662) (96 - 148) (41 - 115)




1/8 (3.2) ED0155665/32 (4.0) ED0153573/16 (4.8) ED0158631/4 (6.4) ED015259


Current (Amps)

Polarity1/8” 5/32” 3/16” 1/4”

(3.2mm) (4.0mm) (4.8mm) (6.4mm)

DC+ 90 - 150 120 - 180 180 - 270 250 - 350

AC 110 - 160 140 - 200 200 - 300 300 - 400

%C %Mn %Si %S %P %Ni

Requirements .12 1.25 .80 .03 .032.00-2.75

AWS E8018-C1 max. max. max. max. max.

Test Results .050-.086 .95-1.24 .35-.70 .009-.019 .007-.017 2.08-2.70





WELDING POSITIONS

1G 2F 2G

3G ➔ 5G ➔4G


28

Jet-LH 8018-C3 MR AWS: E8018-C3 H4R Low Hydrogen, Low Alloy Steel Stick Electrode



Required E8018-C3 H4R 68,000 - 80,000 80,000 (550) 24 20 (27)

—(470 - 550) min. min. min.

Test ResultsAs welded

68,000 - 79,000 80,000 - 94,00024 - 31

40 - 115 16 - 65(470 - 545) (550 - 648) (54 - 156) (22 - 88)

Stress relieved 67,000 - 73,000 76,000 - 84,00030 - 32 — —

2 hrs @ 1150°F (620°C) (462 - 503) (524 - 579)




Requirements .12.40-.125

.80 .03 .03 .15 .35.80-1.10

.05AWS E8018-C3 H4R max. max. max. max. max. max. max.

Test Results .04-.08 .64-1.24 .32-.62 .012-.023 .006-.018 .01-.10 .01-.26 .83-1.09 .001-.013



An excellent stick electrode withexcellent impact properties. Jet-LH 8018-C3 MR produces a nominal 1% nickel deposit that is agreat fit for a wide range of weldingapplications. A good choice for weld-ing on weathering type steels.

ADVANTAGE LINCOLN





• Primarily designed for all positionfabrication or repair of 1% nickelsteels and a wide variety of otherlow alloy and carbon steels.

• General purpose welding of manyhigh strength alloy that require adeposit with a tensile strength of80,000 psi.

• Also used for fillet welds on 110,000psi steel quenched and temperedsuch as ASTM A514 and A517.

CONFORMANCE

AWS A5.5: E8018-C3 H4RASME SFA-5.5: E8018-C3 H4RABS: E8018-C3 H4RMilitary: MIL-E-22200/1; MIL-8018-C3CSA W48.3: E55018-C3

Diameter 50 Lb. (23 kg)Inches (mm) Easy Open Cans

1/8 (3.2) ED0151535/32 (4.0) ED0151463/16 (4.8) ED0151577/32 (5.6) ED0155831/4 (6.4) ED015582


Current (Amps)

Polarity1/8” 5/32” 3/16” 7/32” 1/4”

(3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

DC+ 110 - 150 130 - 190 180 - 270 250 - 330 300 - 400

AC 120 - 170 140 - 225 210 - 290 270 - 370 325 - 420



WELDING POSITIONS

1G 2F 2G

3G ➔ 4G 5G ➔


29

JET-LH 9018-B3 MR AWS: E9018-B3 H4R Low Hydrogen, Low Alloy Steel Stick Electrode

Great low hydrogen stick electrode.For welding 2-1/4% chromium, 1% molybednum steels when heattreating is required. Good mechanicalproperties in the as-welded andstress-relieved conditions.

ADVANTAGE LINCOLN

• Capable of producing 2-1/4%chromium, 1% molybdenum depositfor welding power piping, tubes,boilers and castings with designtemperatures above 850°F (450°C).

• All position welding.




• Primarily designed for all positionfabrication or repair welding of hightemperature service steels in thesteam power generating, petroleum,pressure vessel, and pressure pipeindustries.

• May also be used in the marineequipment, chemical processing,utilities and shipbuilding industries.

CONFORMANCE

AWS A5.5: E9018-B3 H4RASME SFA-5.5: E9018-B3 H4R


psi (MPa) psi (MPa) (%) @ 0°F (-18°C) @ -20°F (-29°C)

Required E9018-B3 H4RStress relieved 77,000 (530) 90,000 (620) 17

— —1 hr @ 1275°F (690°C) min. min. min.


21 - 2559 - 82 37 - 65

1 hr @ 1275°F (690°C) (593 - 690) (690 - 786) (80 - 111) (50 - 88)



Diameter 25 Lb. (11.3 kg) 50 Lb. (22.7 kg)Inches (mm) Easy Open Cans Easy Open Cans

3/32 (2.4) ED0234751/8 (3.2) ED0234765/32 (4.0) ED023477


Current (Amps)

Polarity3/32” 1/8” 5/32”

(2.4mm) (3.2mm) (4.0mm)

DC+ 70 - 110 100 - 140 120 - 190

AC 85 - 120 110 - 150 135 - 200

%C %Mn %Si %S %P %Cr %Mo

Requirements.05-.12

.90 .80 .04 .032.00-2.50 .90-1.20

AWS E9018-B3 H4R max. max. max. max.

Test Results .06-.08 .60-.75 .55-.70 .006-.013 .010-.018 2.10-2.45 .91-.98





WELDING POSITIONS

1G 2F 2G

3G ➔ 4G 5G ➔


30

JETWELD LH-110M MR AWS: E11018-M H4R Low Hydrogen, Low Alloy Steel Stick Electrode


psi (MPa) psi (MPa) (%) @ -60°F (-51°C)

Required E11018-M H4R 98,000 - 110,000 110,000 (760) 20 20 (27)As welded (680 - 760) min. min. min.

Test ResultsAs welded 98,000 - 109,000 110,000 - 128,000

20 - 2535 - 69

(680 - 751) (760 - 882) (47 - 93)Stress relieved 98,000 - 107,000

— 20 - 2620 - 45

1 hr @ 1150°F (620°C) (680 - 738) (27 - 61)




Requirements .101.30-1.80

.60 .030 .030 .40.25-.50 1.75-.250

.05AWS E11018-M H4R max. max. max. max. max. max.

Test Results .04-.09 1.30-1.80 .26-.59 .008-.016 .008-.018 .03-.35 .30-.47 1.7-2.3 .005-.015



You’ll especially like this all-positionelectrode for jobs that call forwelding high tensile steels such asT-1 steel and HY-80. Jetweld LH-110M MR is also a great match for anygeneral fabrication or repair where theweld deposit must meet AWS E11018-M. Also produces x-ray qualitywelds.

ADVANTAGE LINCOLN

• All position welding — weld metalfreezes rapidly even though slagremains relatively fluid.

• Excellent tensile strengths and yieldstrengths.




• For all position welding of high ten-sile, low alloy castings, forgings andsteel plate such as T-1 and HY-80.

• Certain ASTM quenched andtempered steels for structural workand pressure vessels.

• General fabrication where welddeposit must meet the requirementsof AWS ASME E11018-M.

CONFORMANCE

AWS A5.5: E11018-M H4RASME SFA-5.5: E11018-M H4RABS: E11018-MMilitary: MIL-E-22200/1; MIL-11018-MCSA W48.3: E76018-M


50 Lb. (22.7 kg)Inches (mm)

Easy Open CansEasy Open Cans

(60 Lb. Master)

3/32 (2.4) ED0155701/8 (3.2) ED010419 ED0151625/32 (4.0) ED0151563/16 (4.8) ED0151521/4 (6.4) ED010417


Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 1/4”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (6.4mm)

DC+ 70 - 100 90 - 155 120 - 190 160 - 280 230 - 360

AC 80 - 110 100 - 170 135 - 225 200 - 310 290 - 410



WELDING POSITIONS

1G 2F 2G

3G ➔ 4G 5G ➔


31



Required 48,000 (330) 60,000 (410) 22 20 (27)—



22 - 3331 - 71 41 - 60

(393 - 460) (434 - 524) (50 - 96) (56 - 81)

Stress-relieved 48,000 - 61,000 62,000 - 69,00028 - 36

50 - 55 391 hour @ 1150°F (620°C) (330 - 420) (427 - 475) (68 - 75) (53)

%C %Mn %Si %S %P


Test Results .08-.12 .35-.55 .15-.25 .010-.020 .005-.010


FLEETWELD 5P AWS: E6010 Fast Freeze, Out-of-Position Pipe Welding, Mild Steel Stick Electrode

Fleetweld 5P is a great choice forwelding on dirty, rusty, greasy orpainted steel — especially in verticalor overhead applications. Thisversatile, fast freeze electrode offersexcellent arc stability. A long-timefavorite among operators who handlecross-country and in-plant pipewelding.


ADVANTAGE LINCOLN• Truly all-position, particularly good

for vertical and overhead.






TYPICAL APPLICATIONS• Tolerates galvanized, plated, dirty,

painted or greasy steel whichcannot be completely cleaned.

• Pipe welding — cross country,in-plant, and non-critical smalldiameter piping.


• Repair welding.

Diameter 5 Lb. (2.3 kg) 10 Lb. (4.5 kg)50 Lb. (22.7 kg)

Inches (mm) Carton Easy Open CansEasy Open Cans


3/32 (2.4) ED021212 ED010210 ED0102111/8 (3.2) ED021213 ED010202 ED0102035/32 (4.0) ED010215 ED0102163/16 (4.8) ED0102077/32 (5.6) ED0102191/4 (6.4) ED010200




WELDING POSITIONS

CONFORMANCEAWS A5.1(1): E6010ASME SFA-5.1: E6010Lloyd’s: Grade 3MABS: E6010CSA W48.1: E41010

3G➔

3G ➔

5G ➔ 5G➔

1G 2F 2G

4G

Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

(2.4mm) (3.2mm) (4.0mm) (4.8mm) (5.6mm) (6.4mm)

DC+ 40-70 75-130 90-175 140-225 200-275 220-325



32

FLEETWELD 5P+ AWS: E6010 Fast Freeze, Out-of-Position Pipe Welding, Mild Steel Stick Electrode



(60 Lb. Master)

3/32 (2.4) ED010282 ED0102831/8 (3.2) ED010277 ED0102785/32 (4.0) ED010284 ED0102853/16 (4.8) ED010281




Required 48,000 (330) 60,000 (410) 22 20 (27)—



24 - 3338 - 63 27 - 48

(393 - 524) (503 - 594) (51 - 85) (37 - 65)

Stress-relieved 51,000 - 64,000 67,000 - 78,00030 - 34

45 - 53—

1 hr @ 1150°F (612°C) (352 - 579) (462 - 538) (61 - 72)

%C %Mn %Si %S %P


Test Results .10-.20 .40-.65 .11-.30 .009-.020 .005-.025


Lincoln’s Fleetweld 5P+ is ideal forsteel that’s less than 100% clean.It’s a first choice for pipe welding, andvertical-up and overhead platewelding.

ADVANTAGE LINCOLN

• Truly all-position, particularly goodfor vertical and overhead.

• Light slag with little slag interferencefor easy arc control. Easy slagremoval, smooth bead.



• Better bead appearance and slagremoval compared to Fleetweld 5P.




• Tolerates galvanized, plated, dirty,painted or greasy steel whichcannot be completely cleaned.

• Pipe welding — cross country,in-plant, and non-critical smalldiameter piping.


• Repair welding.



WELDING POSITIONS

CONFORMANCEAWS A5.1(1): E6010ASME SFA-5.1: E6010ABS: E6010CSA W48.1: E41010

Current (Amps)

Polarity3/32” 1/8” 5/32” 3/16”

(2.4mm) (3.2mm) (4.0mm) (4.8mm)

DC+ 40 - 70 65 - 130 90 - 175 140 - 225

3G➔

3G ➔

5G ➔ 5G➔

1G 2F 2G

4G



33

SHIELD-ARC 85 AWS: E7010-A1 Fast Freeze, Out-of-Position Pipe Welding Low Alloy Steel Stick Electrode

Need a reliable, all-position stickelectrode for high tensile steelpipe? Here’s your electrode!Shield-Arc 85 produces a 70,000 psi,1/2% molybdenum weld deposit foruse on 1/2% molybdenum pipe steelsand API 5LX-42 through X-56 linepipe.

ADVANTAGE LINCOLN

• All position pipe welding low alloysteel stick electrode.






• API 5LX-42 through X-56 gradepipe, and 1/2% moly steels.




• Vertical and overhead plate welding.

CONFORMANCE

AWS A5.5(1): E7010-A1ASME SFA-5.5: E7010-A1ABS: E7010-A1Military: MIL-E-22200/7; MIL-7010-A1CSA W48.3: E48010-A1


psi (MPa) psi (MPa) (%) @ 70°F (20°C) @ -20ºF (-29ºC)

Required AWS E7010-A1Stress-relieved 57,000 min. 70,000 min. 22

— —1 hour @ 1150°F (620°C) (390) (480) min.


22 - 2668

—(390 - 489) (480 - 538) (92)

Stress-relieved 64,000 - 74,000 78,000 - 84,00025- 30

52 - 77 26 - 321 hour @ 1150°F (620°C) (441 - 510) (538 - 579) (70 - 104) (35 - 43)

%C %Mn %Si %S %P %Mo

Requirements .12 .60 .40 .03 .03.40-.65

AWS E7010-A1 max. max. max. max. max.

Test Results .08-.12 .30-.55 .10-.30 .005-.020 .005-.020 .40-.55





3/32 (2.4) ED0128931/8 (3.2) ED0128855/32 (4.0) ED0128963/16 (4.8) ED012889



Current (Amps)Polarity 3/32” 1/8” 5/32” 3/16”

(2.4mm) (3.2mm) (4.0mm) (4.8mm)

DC+ 50-90 75-130 90-175 140-225


WELDING POSITIONS

3G➔

3G ➔

5G ➔ 5G➔

1G 2F 2G

4G



34

SHIELD-ARC HYP AWS: E7010-G Fast Freeze, Out-of-Position Pipe Welding Low Alloy Steel Stick Electrode

Shield-Arc HYP is a “first-choice”electrode for some of the world’smost demanding welding pros. Forpipe grades API 5LX-52 through X-65.Shield-Arc HYP meets AWS E7010-P1requirements.

ADVANTAGE LINCOLN• All-position, pipe welding low alloy

steel stick electrode.





TYPICAL APPLICATIONS• API 5LX-52 through X-65 grade

pipe, and 1/2% moly steels.




CONFORMANCE

AWS A5.5(1): E7010-G, E7010-P1ASME SFA-5.5: E7010-G, E7010-P1CSA W48.3: E48010-G


psi (MPa) psi (MPa) (%) @ -20ºF (-29ºC) @-40°F (-40°C)

Required AWS E7010-GAs-welded 60,000 (410) 70,000 (480)

22 — —min. min.

Test Results

As-welded61,000 - 74,000 74,000 - 86,000

22 - 3034 - 53

—(421 - 510) (510 - 593) (46 - 72)

Stress-relieved 72,000 - 76,000 80,000 - 82,00024 - 27

23 - 35 25 - 261 hour @ 1150°F (620°C) (496 - 524) (550 - 565) (31 - 47) (34 - 35)

%C %Mn %Si %S %P %Mo %Cr %Ni %V

Requirements— 1.00 .80 — — .20 .30 .50 .10

AWS E7010-G(2)

Test Results .10-.15 .20-.50 .05-.25 .010-.020 .005-.010 .25-.45 .01-.03 .01-.05 .001-.010

(1) Typical all weld metal.(2) Weld deposit must meet the minimum requirement of at least one of the elements listed.




1/8 (3.2) ED0128105/32 (4.0) ED0128183/16 (4.8) ED0128147/32 (5.6) EDS12821



AmpsPolarity 1/8” 5/32” 3/16” 7/32”

(3.2mm) (4.0mm) (4.8mm) (5.6mm)

DC+ 75-130 90-185 140-225 160-250


WELDING POSITIONS

3G➔

3G ➔

5G ➔ 5G➔

1G 2F 2G

4G



35

SHIELD-ARC HYP+ AWS: E7010-P1 Fast Freeze, Out-of-Position Pipe Welding Low Alloy Steel Stick Electrode

Tendency for “fingernailing” andarc stick have been virtuallyeliminated! Designed for all passes ofAPI 5LX-52 through X-65 highstrength pipe. Provides the welderwith a clean, visible weld puddle andsuperior puddle control. A trueE7010-P1 stick electrode.

ADVANTAGE LINCOLN• All-position, pipe welding low alloy

steel stick electrode.





TYPICAL APPLICATIONS• API 5LX-52 through X-65 grade

pipe.




• Vertical down and overhead platewelding.

WELDING POSITIONS

CONFORMANCE

AWS A5.5(1): E7010-G, E7010-P1ASME SFA-5.5: E7010-G, E7010-P1CSA W48.3: E48010-P1



Required AWS E7010-P1As-welded 60,000 (410) 70,000 (480)

2220 (27)

min. min. min.

Test Results

As-welded64,000 - 71,000 77,000 - 86,000

—30 - 41

(441 - 489) (531 - 593) (41 - 56)

%C %Mn %Si %S %P %Mo %Cr %Ni %V

Requirements .20 1.20 .60 .03 .03 .50 .30 1.00 .10AWS E7010-P1 max. max. max. max. max. max. max. max. max.

Test Results .13-.17 .49-.63 .08-.18 .008-.011 .009-.014 .27-.31 .02 .01-.02 <.01





1/8 (3.2) ED0295115/32 (4.0) ED0295133/16 (4.8) ED029509




(3.2mm) (4.0mm) (4.8mm)

DC+ 75 - 130 90 - 185 140 - 225


3G➔

3G ➔

5G ➔ 5G➔

1G 2F 2G

4G



36

SHIELD-ARC 70+ AWS: E8010-G Fast Freeze, Out-of-Position Pipe Welding Low Alloy Steel Stick Electrode

Here’s an electrode that makesshort work of even the mostchallenging high silicon pipeapplications! Shield Arc 70+ is anoutstanding choice for API 5LX-56through X-70 grade pipe, as well as for a wide range of sheet metalwelding assignments. Lowtemperature impact properties areexcellent.

ADVANTAGE LINCOLN

• All-position pipe welding low alloysteel stick electrode.






• API 5LX-56 through X-70 gradepipe, and relatively high silicon pipe.


• Sheet metal welding.

• Vertical down and overhead platewelding.

WELDING POSITIONS

CONFORMANCE

AWS A5.5(1): E8010-GASME SFA-5.5: E8010-GABS: E8010-GCSA W48.3: E55010-G



Required AWS E8010-GAs-welded 67,000 min. 80,000 min. 19

— —(460) (550) min.

Test ResultsAs-welded 67,000 - 76,000 80,000 - 94,000 19 - 28 38 - 57 27 - 47

(460 - 524) (550 - 648) (51 - 77) (37 - 64)

Stress-relieved 67,000 - 72,000 76,000 - 80,000 23 - 24 44 - 64 34 - 531 hour @ 1150°F (620°C) (460 - 496) (524 - 550) (60 - 87) (46 - 72)

%C %Mn %Si %Ni %Cr %Mo %V %S %P

Requirements—

1.00 .80 .50 .30 .20 .10— —

AWS E8010-G(2) min. min. min. min. min. min.

Test Results .13-.17 .60-1.20 .05-.30 .75-.97 .01-.20 <.01 .025-.040 .007-.010 .008-.012




1/8 (3.2) ED0128415/32 (4.0) ED0128493/16 (4.8) ED012845




(3.2mm) (4.0mm) (4.8mm)

DC+ 75 -130 90 - 185 140 - 225



3G➔

3G ➔

5G ➔ 5G➔

1G 2F 2G

4G



37

SHIELD-ARC 80 AWS: E8010-G Fast Freeze, Out-of-Position Pipe Welding Low Alloy Steel Stick Electrode

When your job involves verticaldown welding on high strengthpipe, reach for Lincoln’s Shield-Arc80 electrode. This dependable stickelectrode offers the perfectcombination of excellent lowtemperature impact properties anddeep penetration. It handles all passeson API 5LX-56 through X-70 pipe.Excellent “stacking” ability is anotherfeature of SA-80, maximizingproductivity on the job site. Alsomeets AWS E8010-P1 requirements.

ADVANTAGE LINCOLN


• Excellent low temperature impactproperties.







CONFORMANCE

AWS A5.5(1): E8010-G, E8010-P1ASME SFA-5.5: E8010-G, E8010-P1CSA W48.3: E55010-G



Required AWS E8010-GAs-welded 67,000 min. 80,000 min. 19

— —(460) (550) min.


19 - 2659 - 78 49 - 65

(460 - 572) (550 - 648) (80 - 106) (66 - 88)


Requirements—

1.0 0.8 0.5 0.3 .20 .10— —


Test Results .14-.16 .61-84 .12-.26 .65-.70 .02 .23-.40 <.01 .009-.011 .008-.012



Diameter 50 Lb. (22.7 kg)mm (Inches) Easy Open Cans

3.2 (1/8) ED0214004.0 (5/32) ED0214014.8 (3/16) ED020922



Current (Amps)Polarity (3.2mm) (4.0mm) (4.8mm)

1/8” 5/32” 3/16”

DC+ 75 - 130 90 - 185 140 - 225



WELDING POSITIONS

5G➔

Manufactured in metric diameters,U.S. Customary sizes are approximate.

Vertical down and overhead platewelding.



38

SHIELD-ARC 90 AWS: E9010-G Fast Freeze, Out-of-Position Pipe Welding Low Alloy Steel Stick Electrode

An all-position pipe electrode that’sa great choice when the task isvertical down welding on API 5LX-70through X-80 pipe. SA-90 alsoperforms well in situations where lowhydrogen processes are not practical,and when welding on dirty steels.

ADVANTAGE LINCOLN








Vertical down and overhead platewelding.

• Use in situations where lowhydrogen welding processes arenot available or practical.


CONFORMANCE

AWS A5.5: E9010-GASME SFA-5.5: E9010-G



Required AWS E9010-GAs-welded 77,000 (530) 90,000 (620) 17

— —min. min. min.


24 - 2650 - 72 41 - 46

(579 - 607) (648 - 690) (68 - 98) (56 - 62)


Requirements (2)—

1.00 .80 .50 .30 .20 .10— —

AWS E9010-G min. min. min. min. min. min.

Test Results .14-.17 .61-.76 .11-.20 .69-.76 .03-.04 .49-.60 <.01 .007-.008 .008-.012





3.2 (1/8) EDS016934.0 (5/32) EDS016944.8 (3/16 EDS01695



Current (Amps)Polarity 3.2mm 4.0mm 4.8mm

(1/8”) (5/32”) (3/16”)

DC+ 75 - 130 80 - 185 140 - 225


WELDING POSITIONS

5G➔



39

LINCOLN 16P AWS: E7016 H4 Low Hydrogen, Mild Steel Pipe Welding Stick Electrode

We designed this quality electrodefor optimum performance forvertical up welding of pipe up toAPI 5LX-65, especially where a lowhydrogen deposit is desired. Lowtemperature impact properties areexcellent with this electrode. Lincoln16P is also a good choice for heavy orhighly restrained mild steel sections.

ADVANTAGE LINCOLN

• Excellent low temperature impactproperties.

• Square burnoff makes weldingeasier, especially in critical pipewelding applications.



• Primarily designed for vertical uproot and fill pass welding of highstrength pipe up to and includingAPI 5LX-65.

• Open gap root pass welding with3/32” (2.5mm) and 1/8” (3.2mm)diameters.

• Single and multiple pass fillet andbutt welds on high strength,medium and high carbon or lowalloy steel.

CONFORMANCE

AWS A5.1: E7016 H4ASME SFA-5.1: E7016 H4




Test Results 65,000 - 82,000 80,000 - 93,00025 - 32

40 - 90As-welded (448 - 566) (550 - 641) (54 - 122)





2.5 (3/32) EDS296343.2 (1/8) EDS296354.0 (5/32) EDS29636


Current (Amps)

Polarity2.5mm 3.2mm 4.0mm(3/32”) (1/8”) (5/32)

DC+ 55 - 80 75 - 120 120 - 160

AC 60 - 80 80 - 120 120 - 160



WELDING POSITIONS

2F 2G

3G ➔

1G

4G5G ➔

• Can weld on all types of heavy orhighly restrained mild steel sections.


Requirements—

1.60 .75— —


Test Results .05-.08 1.0-1.5 .40-.60 .010-.020 .008-.015 .02-.05 .01-.03 .01-.05 .01-.03



40

LINCOLN 18P AWS: E8018-G H4 Low Hydrogen, Mild Steel Pipe Welding Stick Electrode

A real workhorse for vertical upwelding jobs on up to X-80 pipe!Lincoln 18P offers excellent lowtemperature impact properties downto -50°F (-46°C). Also a good choicefor heavy or highly restrained mildsteel sections.

ADVANTAGE LINCOLN

• Good low temperature impactproperties down to -50°F.

• Square burnoff makes weldingeasier, especially in critical pipewelding applications.

• Moisture resistant coating preventsexcessive moisture pick up, whichcan lead to porosity in the weld.



• Primarily designed for vertical up fillpass welding of high strength pipeup to and including API 5LX-80.

• Single and multiple pass fillet andbutt welds on high strength,medium and high carbon orlow alloy steel.

• Heavy or highly restrained mild steelsections.

CONFORMANCE

AWS A5.5: E8018-G, E8018-G H4ASME SFA-5.5: E8018-G, E8018-G H4


psi (MPa) psi (MPa) (%) @ -20ºF (-29ºC) @-50°F (-46°C)

Required 67,000 (460) 80,000 (550) 19— —

AWS E8018-G H4R min. min. min.


2874 - 83 57 - 59

(607 - 648) (683 - 724) (100 - 112) (77 - 80)




3.2 (1/8) EDS296374.0 (5/32) EDS29638


Current (Amps)

Polarity3.2mm 4.0mm(1/8”) (5/32”)

DC+ 90 - 140 130 - 170

AC 100 - 140 140 - 180


%C %Mn %Si %S %P %Cr %Mo %Ni %V %Cu

Requirements—

1.00 .80 — — .30 .20 .50 .10 .20AWS E8018-G H4R(2) min. min. min. min. min. min. min.

Test Results .04-.08 1.30-1.60 .30-.60 .005-.020 .005-.020 .03-.07 .30-.45 .70-.95 .005-.015 .03-.08



WELDING POSITIONS

5G ➔

1G 2G 3G ➔

4G





mm (Inches)Easy Open Cans(60 Lb. Master)

2.5 (3/32) ED0303433.2 (1/8) ED0303444.0 (5/32) ED0303454.5 (3/16) ED030346

41

LH-D80 AWS: E8018-G Low Hydrogen, Mild Steel and Low Alloy Steel Pipe Welding Stick Electrode

Choose LH-D80 electrode whenyou need a dependable stickelectrode for vertical down lowhydrogen welding on pipe up toX-70. Operators appreciate theunique slag system that facilitateseasy puddle control with virtually noslag interference.

ADVANTAGE LINCOLN

• Good low temperature impactproperties down to -40°F (-40°C).

• Unique hot start helps initiate thearc and quickly establish puddlecontrol.

• Slag design allows for easy controlof weld puddle.



• Primarily designed for vertical downfill pass welding of high strength pipeup to and including API 5LX-70.

• Any vertical down, single andmultiple pass fillet and butt welds onhigh strength, medium and highcarbon or low alloy steel.

CONFORMANCE

AWS A5.5: E8018-G ASME SFA-5.5: E8018-G CSA W48.3: E55018-G



Required 67,000 (460) 80,000 (550) 19—

AWS E8018-G min. min. min.

Test ResultsAs-welded 73,900 84,400

2481

(509) (582) (110)



Current (Amps)

Polarity2.5mm 3.2mm 4.0mm 4.5mm(3/32”) (1/8”) (5/32”) (3/16”)

DC+ 80-110 125-155 170-215 200-260

DC- 80-110 125-155 170-215 200-260

AC 80-110 125-155 170-215 200-260


Requirements—

1.00 .80— —

.30 .20 .50—

.20AWS E8018-G(2) min. min. min. min. min. min.

Test Results .05-.09 1.10-1.50 .30-.60 .005-.015 .01-.02 .01-.05 .01-.05 .01-.05 .01-.03 .03-.08




WELDING POSITIONS



5G➔

1G 2G 3G➔

4G


NOTE: Manual LH-D elec-trodes are manufacturedunder lot control. A Certificateof Test showing actualdeposit chemistry andmechanical properties perAWS 5.5 (DC+ only) is avail-able on request from the fac-tory for every lot of electrode.(fax 216-383-8386).




2.5 (3/32) ED0303473.2 (1/8) ED0303484.0 (5/32) ED0303494.5 (3/16) ED030350

42


The product of choice for verticaldown, low hydrogen pipe welding,and for fill and cap passes of highstrength pipe through API 5LX-80.Operators love this electrodes unique“hot start” tip, with outstandingpuddle control. Terrific lowtemperature impacts.

ADVANTAGE LINCOLN

• High deposition rates and excellentlow temperature impact propertiesdown to -50°F (-46°C).

• Unique “hot start” tip helps initiatethe arc and quickly establish puddle

control, while slag design allows foreasy control of weld puddle.




• Any vertical down, single or multiplepass fillet and butt welds on highstrength, medium and high carbonor low alloy steel.

• Can weld on all types of heavy orrestrained mild steel joints.

CONFORMANCEAWS A5.5: E9018-G ASME SFA-5.5: E9018-G CSA W48.3: E62018-G



RequiredAWS E9018-G 77,000 (530) 90,000 (620) 17


Test ResultsAs-welded 83,000 - 90,000 94,000 - 99,000 26 - 29 77 - 88 49 - 61

(572 - 620) (648 - 683) (104 - 119) (66 - 83)




Current (Amps)

Polarity2.5mm 3.2mm 4.0mm 4.5mm(3/32”) (1/8”) (5/32”) (3/16”)

DC+ 80-110 125-155 170-215 200-260

DC- 80-110 125-155 170-215 200-260

AC 80-110 125-155 170-215 200-260


Requirements—

1.00 .80— —

.30 .20 .50 .10—


Test Results.05-.07 1.30-1.60 .30-.60

.020 .025 .08 .05.60-.95

.015.03-.08

max. max. max. max. max.




WELDING POSITIONS



5G➔

1G 2G 3G➔

4G





3.2 (1/8) ED0303514.0 (5/32) ED030352

43


When the job calls for vertical down,low hydrogen welding on pipe up toX-80, operators the world overreach for this dependable Lincolnstick electrode. The unique “hot start”tip minimizes starting porosity. Terrificlow temperature impacts and out-standing tensile strength.

ADVANTAGE LINCOLN

• High deposition rates and excellentlow temperature impact propertiesdown to -50°F (-46°C).

• Unique “hot start” tip helps initiatethe arc and quickly establish puddlecontrol, while slag design allows foreasy control of weld puddle.




• Any vertical down, single or multiplepass fillet and butt welds on highstrength, medium and high carbonor low alloy steel.

• Can weld on all types of heavy orrestrained mild steel joints.

CONFORMANCE

AWS A5.5: E10018-G ASME SFA-5.5: E10018-G CSA W48.3: E69018-G



RequiredAWS E10018-G 87,000 (600) 100,000 (690) 16



23 - 2835 - 77 30 - 53

(680 - 779) (731 - 848) (47 - 104) (41 - 72)(1) Typical all weld metal.



Current (Amps)

Polarity3.2mm 4.0mm(1/8”) (5/32”)

DC+ 125 - 155 170 - 215

DC- 125 - 155 170 - 215

AC 125 - 155 170 - 215


Requirements—

1.00 .80— —

.30 .20 .50 .10 .20AWS E10018-G(2) min. min. min. min. min. min. min.

Test Results.05-.09 1.50-1.75 .40-.70

.020 .025 .08.20-.30 .60-.95

.015.03-.08

max. max. max. max.





WELDING POSITIONS


5G➔

1G 2G 3G➔

4G



44

Weld MetalGroup No. Analysis No. Product

F-3 A-1 Fleetweld 5P

F-3 A-1 Fleetweld 5P+

F-3 A-1 Fleetweld 35


F-1 — Fleetweld 22

F-3 A-2 Shield-Arc 85

F-3 — Shield-Arc HYP

F-3 — Shield-Arc 70+

F-1 A-1 Jetweld 2

F-1 A-1 Jetweld 3

F-1 A-1 Jetweld 1

F-2 A-1 Fleetweld 7



F-4 A-1 Jetweld LH-70

PACKAGING TYPES

Weld MetalGroup No. Analysis No. Product

F-4 A-1 Jet-LH 78 MR


F-4 A-1 Excalibur 7018

F-4 A-1 Jetweld LH-75 MR

F-4 A-1 Excalibur 7018-1


F-4 A-1 Lincoln LH-D80

F-4 — Lincoln 18P



F-4 A-3 Jetweld LH-90 MR

F-4 A-3 Jet-LH 8018-B2 MR

F-4 A-10 Jet-LH 8018-C1 MR

F-4 A-10 Jet-LH 8018-C3 MR

F-4 A-4 Jet-LH 9018-B3 MR

F-4 A-12 Jetweld LH-110M MR

ASME BOILER & PRESSURE VESSEL CODE Section IX

F and A No.’s for Stick Electrodes

Lincoln Electric’s stick electrodes are packaged in eithercartons or hermetically sealed easy open cans. Unopened,Lincoln cans or cartons will retain the proper moisture contentindefinitely when stored in good condition.

Electrodes come in 12, 14 and 18 inch (305mm, 355mm and460mm) lengths, depending on electrode and packagingranges from 5 to 50 lb. (2.3 to 22.7 kg) cartons and 10 to 50 lb.(4.5 to 22.7 kg) easy open cans.


7018 H4R

OPTIONAL SUPPLEMENTALDESIGNATOR

AWS CLASS (OR NAME)ON EACH ELECTRODE

LOOK FOR LINCOLN'SSYMBOL OF DEPENDABILITY

45

Stick AWS/ ABS Lloyd’s Register DNV BV CWB/CSA GLElectrode ASME Grade Grade Grade Grade Grade Grade Military

Fleetweld 5P E6010 E6010 3M E41010

Fleetweld 5P+ E6010 E6010 E41010

Fleetweld 35 E6011 E6011 3M

Fleetweld 35LS E6011 E41011

Fleetweld 180 E6011 E41011

Fleetweld 7 E6012 E6012

Fleetweld 37 E6013 E6013 3M 1 1 E41013 1

Fleetweld 22 E6022

Jetweld 2 E6027 E6027 3M 3 3 E41027 3

Shield Arc 85 E7010-A1 E7010-A1 E48010-A1 MIL-7010-A1

Shield Arc HYPE7010-G,E7010-P1 E48010-G

Shield Arc HYP+E7010-G,E7010-P1 E48010-P1

Fleetweld 47 E7014 E7014 1M 1 1 E48014 1

Lincoln 16P E7016

Lincoln 7018 AC E7018 E48018

Jetweld LH-70 E7018 H4R E7018 3M, 3MYH5 3Y40H5 3YHHH E48018-1 3YH5 MIL-7018

Jet-LH 78 MR E7018 H4R E7018 3M, 3MYH5 3YH5 3YHHH E48018-1 3YH5

Jetweld LH-73 E7018 H8 E7018 E48018

Excalibur 7018E7018 E7018M, 3M, 3MYH5 3YH5 3YHHH E48018 3YH5E7018 H4R 3, 3YH5

Excalibur 7018-1E7018-1, E7018M, 3M, 3MYH5 3YH5 3YHHH E48018-1 3YH5E7018-1 H4R 3, 3YH5

Jetweld 3 E7024 E7024 1 1 1

Jetweld 1 E7024-1 E7024-1 1 1 1 E48024-1 1

Jetweld LH-3800 E7028 H8 E7028 2M, 2YM 2Y10 2YHH E48028 2YH10

Shield-Arc 70+ E8010-G E8010-G E55010-G

Shield-Arc 80E8010-G, E55010-GE8010-P1

Jetweld LH-90 MRE8018-B2 H4R,E9018-G H4R

Jet-LH 8018-B2 MR E8018-B2 H4R

Jetweld 8018-C1 MR E8018-C1 H4R E8018-C1 H4R E55018-C1

Jetweld 8018-C3 MR E8018-C3 H4R E8018-C3 H4R E55018-C3 MIL-8018-C3

LH-D80 E8018-G E55018-G

Lincoln 18PE8018-G,E8018-GH4

Shield-Arc 90 E9010-G

Jet-LH 9018-B3 MR E9018-B3 H4R

LH-D90 E9018-G E62018-G

LH-D100 E10018-G E69018-G

Jetweld LH-110M MR E11018-M H4R E11018-M MIL-11018-M

ABS: American Bureau of Shipping & Coast GuardLloyd’s: Lloyd’s Register of ShippingDNV: Det Norske VeritasBV: Bureau VeritasCWB/CSA: Canadian Welding BureauGL: Germanischer Lloyd

(1) Approvals are updated periodically. Consult your local Lincoln district office for the latest Approval/Grade revision.

AGENCY APPROVALS (1)


46

A27 All (1)A36 All (2)A53 All (2), (4)A105 LH-78 MR, Excalibur 7018A106 A, B & C (2)A131 A, B, D, DS, CS, E (1), (2)

AH32, AH36, DH32, DH36, EH32 & EH36 (1), (3)AH40, DH40 & EH40 (1)

A134 See A36, A283, A285, or A570A135 A & B (2), (4)A139 A, B, C, D, E (2), (4)A148 80-40 &-50 LH-8018-C3 MR

90-60 LH-90 MR, LH-8018-B2 MR105-85 & 115-95 LH-110M MR

A161 Low Carbon LH-78 MR, Excalibur 7018, (4)T1 (.5% Mo) SA-85

A178 A, B, & C LH-78 MR, Excalibur 7018, (4)A179 LH-78 MR, Excalibur 7018, (4)A181 Class 60; Class 70 LH-78 MR, Excalibur 7018A182 F2, (.5% Mo) SA-85

F2, F11, F12 LH-90 MR, LH-8018-B2 MRF22 LH 9018-B3 MR

A184 See A615, A616, A617, A706A192 7” max dia. (2), (4)A199 T4 & T22 LH 9018-B3 MR

T11 LH-90 MR, LH-8018-B2 MRA200 T4 & T22 LH 9018-B3 MR

T11 LH-90 MR, LH-8018-B2 MRA202 A LH-8018-C3 MRA203 A, B, D & E LH-8018-C1 MRA209 T1, T1a & T1b SA-85, LH-78MR, Excalibur 7018A210 A-1 (2), (4)

C SA-85, LH-78MR, Excalibur 7018A211 See A570 LH-78MR, Excalibur 7018, (4)A213 T2, T11, T12 & T17 LH-90 MR, LH-8018-B2 MR

T22 LH 9018-B3 MRA214 LH-78MR, Excalibur 7018A216 WCA, WCB, WCC (1)A217 WC4, WC5, WC6 LH-8018-B2 MR

WC9 LH 9018-B3 MRA225 C LH-110M MR

D LH-8018-C3 MRA226 LH-78MR, Excalibur 7018, (4)A234 WPB, WPC LH-78MR, Excalibur 7018, (4)

WP1 SA-85WP11, WP12 LH-90MR, LH-8018-B2 MRWP22 LH 9018-B3 MR

A242 Groups 1, 2, 3, 4 & 5 (1), (6)A250 T1, T1a & T1b SA-85

T2, T11 & T12 LH-90 MR, LH-8018-B2 MRT22 Jet-LH 9018-B3 MR

A252 1, 2 & 3 LH-78MR, Excalibur 7018, (4)A266 1, 2 & 4 (1)

3 LH-8018-C3 MRA283 A, B, C, D (2)A284 C & D (2)A285 A, B, C (2)A299 LH-8018-C3 MRA328 (1)

A333 & A334 1 & 6 LH-78 MR, LH-8018-C3 MR7 LH-8018-C1 MR

A335 P1 & P15 SA-85P2, P11, P12 LH-90 MR, LH-8018-B2 MRP22 LH 9018-B3 MR

A336 F11 & F12 LH-90 MR, LH-8018-B2 MRF21 & F22 LH 9018-B3 MR

A350 LF1 LH-78 MR, Excalibur 7018, LH-8018-C3 MRLF2 LH-8018-C3 MRLF5 LH-8018-C1 MRLF6 Class 3 LH-78 MR,Excalibur 7018, LH-8018-C3 MR

A352 LCA, LCB & LCC Excalibur 7018-1LC2 LH-8018-C1 MR

A356 1 (3)5, 6, 8 & 9 LH-90 MR, LH-8018-B2 MR10 LH 9018-B3 MR

A366 (2)A369 FPA, FPB (4)

FP1 SA-85FP2, FP11, FP12 LH-90 MR, LH-8018-B2 MRFP21 & FP22 LH 9018-B3 MR

A372 Type I (1)Type II LH-8018-C3 MRType IV, V (Class 65) LH-110M MR

A381 Y35, Y42, Y46 LH-78 MR, Excalibur 7018, (4)Y48 LH-78 MR, Excalibur 7018, (4)Y50 & Y52 SA-HYP, LH-78 MR, Excalibur 7018Y56 SA70+, SA80, LH-78 MRY60 SA70+, SA80, SA-HYP, LH-D80, LH-D90Y65 SA70+, SA80, SA-HYP, LH-D80, LH-D90

A387 2, 11 & 12 LH-90 MR, LH-8018-B2 MR22 LH 9018-B3 MR

A389 C23 LH-90 MRC24 LH 9018-B3 MR

A405 P24 LH 9018-B3 MRA414 A, B, C & D (2), (5)

E, F & G (1)A420 WPL6 LH-78 MR, Excalibur 7018, LH-8018-C3 MR

WPL9 LH-8018-C1 MRA423 1 LH-90 MR

2 LH-8018-C3 MRA426 CP1 SA-85

CP2, CP11, CP12 LH-90 MR, LH-8018-B2 MRCP15 SA-85CP21 & CP22 LH 9018-B3 MR

A442 55 & 60 (1)A455 LH-8018-C3 MR, (1), (8)A469 Class 1 LH-8018-C3 MR

Class 2 LH-8018-C1 MRClass 3

A470 Class 1 LH-8018-C3 MRClass 2 LH-8018-C1 MRClass 4 & 6, 8 LH-110M MR

A487 10A, 4B, 8B, 13B LH-110M MR11A, 12A LH-90 MR, LH-8018-B2 MR9D, 11B, 12B LH-110M MR6A LH-8018-C3 MR

A498 See A199, A213, A334A500 A, B & C (2)

D LH-78 MR, Excalibur 7018A501 (2)A508 1 & 1A (1)

4N-C3 LH-110M MR4N-C1 & 5-C1 LH-110M MR22-C3 LH-9018-B3 MR

A514 All Grades>2 1/2” LH-110M MR, (7)All Grades 2 1/2” & under LH-110M MR, (7)

A515 60, 65 & 70 (1)A516 55, 60, 65 & 70 (1)

ASTM StickNO. Grades Electrodes


WELD METAL SELECTION GUIDE


47

A675 45, 50, 55 & 60 (2)65 & 70 (1)75 & 80 LH-8018-C3 MR

A678 A LH-8018-C3 MRB LH-8018-C3 MR, (1)C & D LH-110M MR

A690 See A588A691 Grade designates type of plate used

to make pipe. See ASTM specs for plate material information.

A692 SA-85A694 F42, F46, F48, F50, F52 & F56 LH-78 MR, LH-8018-C3 MR, (10)

F60 & F65 LH-8018-C3 MR, LH-D80, LH-D90A695 35 Type A, B, C & D (2)

40 Type A, B, C & D (3)45 Type A, C & D LH-8018-C3 MR

A696 B & C LH-78 MR, Excalibur 7018C LH-78 MR, Excalibur 7018

A706 LH-8018-C3 MRA707 L1, L2 & L3 Class 1 & 2 Excalibur 7018-1

L4, L5 L6, Class 1, 2, 3 & 4 LH-8018-C1 MRA709 36 & 50 (1)

50W (1), (6)100 & 100W LH-110M MR

A710 A, Class 1 LH-90 MRA, Class 2 Excalibur 7018-1A, Class 3 LH-8018-C1 MRB LH-90 MRC, Class 1 LH-110M MR

A714 I, II & III LH-78 MR, Excalibur 7018IV LH-8018-C3 MRV, Type E, F & S LH-8018-C1 MRVI, VII & VIII Type E & S LH-8018-C3 MR

A715 50 (2)60 (3)70 LH-8018-C3 MR80 LH-110M MR

A724 A, B & C LH-110M MRA727 LH-78 MR, Excalibur 7018A732 (1)

3Q, 13Q LH-110M MRA734 Type A LH-8018-C1 MR

Type B LH-8018-C3 MRA735 Class 1 LH-8018-C3 MR

Class 4 LH-110M MRA736 A, Class 2 Excalibur 7018-1

A, Class 3 LH-8018-C1 MRC, Class 1 & 3 LH-110M MR

A737 B (1)C LH-8018-C3 MR

A738 A LH-8018-C3 MRC LH-8018-C3 MR

A739 B 11 LH-90 MR, LH-8018-B2 MRB 22 Jet-LH 9018-B3 MR

A757 A1Q, A2Q Excalibur 7018-1B2N, B2Q & C1Q LH-8018-C1 MRD1N1, D1Q1 LH-110M MR

A758 60 & 70 LH-78 MR, Excalibur 7018



A517 All Grades 2 1/2” & under (7)All Grades 2-1/2” - 6” LH-110M MR, (7)

A521 CA, CC, CC1 (1)AE LH-110M MR

A523 A & B LH-78 MR, Excalibur 7018, (4)A524 I & II LH-78 MR, Excalibur 7018, (2)A529 42 & 50 (1)A533 Class 1, Type A, B, C & D LH-8018-C3

Class 2, Type A, B, C & D LH-110M MR, (4)Class 3, Type A, B, C & D LH-110M MR

A537 1 (1)2 & 3 LH-8018-C3 MR

A539 2-3/8” max. Diameter, 1/8” max. Thick (2), (4)A541 1, 1A (1)

2-Class, 1, & 3-Class 1 LH-8018-C311-Class 4 LH-90 MR, LH-8018-B2 MR22-Class 4 LH-110M MR

A542 Class 1, Type A, B & C LH-110M MRClass 3, Type A, B & C LH-110M MR

A543 Class 1, Type B & C LH-110M MR, (7)Class 3, Type B & C LH-110M MR

A556 A2, B2, C2 LH-78 MR, Excalibur 7018, (4)A557 A2, B2, C2 LH-78 MR, Excalibur 7018, (4)A562 LH-78 MR, Excalibur 7018A569 (2)A570 30, 33, 36, 40 & 45 (2)

50 & 55 (1)A572 42, 50 & 55 (1)

60 & 65 LH-8018-C3 MRA573 58, 65 & 70 (1)A587 LH-78 MR, Excalibur 7018, (4)A588 All (Grades A, B, C & K) LH-8018-C3 MR, (1), (6)A589 Butt Welded; A & B LH-78 MR, Excalibur 7018, (4)A595 A, B LH-78 MR, Excalibur 7018

C LH-78 MR , Excalibur 7018, (11)A606 All (1)A607 45 (2)

50, 55 & 60 (1)65 LH-8018-C3 MR

A611 A & B, C & D (2)A612 LH8018-C3 MR, LH-8018-C1 MRA615 40 (1)

75 LH-110M MRA616 50 LH-8018-C3 MRA617 40 (1)A618 Ia, Ib, II & II LH-78 MR, Excalibur 7018A620 (2)A633 A, C, D LH-8018-C3 MR, (1)

E LH-8018-C3 MRA656 50 & 60 (1)

70 LH-8018-C3 MRA660 WCA LH-78 MR, Excalibur 7018, (4)

WCB, WCC LH-78 MR, Excalibur 7018A662 A, B & C Excalibur 7018-1A668 A & B (2)

C (1)D, E & G LH-8018-C3 MRF, K LH-110M MR



48

E6010 E8018-B1 H4RElectrode

AWS CLASSIFICATIONS

AWS A5.1 AWS A5.5

Tensile X 10 ksi

Position

For AC or DC+

Chemical compositionof weld metal deposit

Diffusible hydrogen designator indicatesthe maximum diffusible hydrogen levelobtained with the product.(Example: H4 = 4.0 max. ml/100 g

Moisture resistant designator indicatesthe electrode’s ability to meet specificlow moisture pickup limits undercontrolled humidification tests.

Electrode

Tensile in ksi

Position

Type of coating and current

Position

1 — Flat, Horizontal, Vertical, Overhead2 — Flat and Horizontal only3 — Flat, Horizontal, Vertical Down, Overhead

Footnotes

(1) Any E70X8 electrode may be used. Jet-LH78 MR or Excalibur 7018 is preferred over Jetweld LH-70 for most pipe and out-of-position welding. Jetweld LH-3800 can be used in place of Jetweld LH-70 for flat and horizontal fillets, laps, and flat butt welds.

(2) Almost any E60XX or E70XX electrode can be used. First, select electrode based on the joint requirements. Second, not all SMAW electrodes are required to have minimum specified levels of notch toughness. If code specifications, or contract document require notch toughness, electrode selection should be limited to those that meet the specific application requirements.

(3) Almost any E70XX electrode can be used. First, select electrode based on the joint requirements. Second, not all SMAW electrodes are required to have minimum specified levels of notch toughness. If code specifications, or contract documents require notch toughness, electrode selection should be limited to those that meet the specific application requirements

(4) Fleetweld 5P, 5P+, 35, or 35LS.

(5) Fleetweld 35, 180, 7, 37, or 47.

(6) For best color match of multi-pass welds to the base plate on unpainted structures, use Jet-LH 8018-C3 MR (1% Ni). The second choice for multi-pass welds on unpainted structures is Jet-LH 8018-C1 MR (2-1/4% Ni). For single pass welds, multi-pass welds which are not exposed and multi-pass welds which do not require close color match, any E7018 electrode may be used.

(7) Fillet welds are frequently made with Excalibur 7018, Jetweld LH-70, Jet-LH 78 MR, or Jet-LH 8018-C3 MR.

(8) Excalibur 7018 for fillets or Jet-LH 8018-C3 MR are recommended for general purpose welding these steels. Jetweld LH-90 can be used particularly if the weldment is to be precipitation hardened or high weld strength is required.

(9) Use Jet-LH-8018-C1 MR when high impact properties [down to -75°F (-59°C)] are required.

(10) Excalibur 7018.

A852A858 LH-78 MR, LH-8018-C3 MR, (10)A859 Class 1 & 2 LH-8018-C1 MRA860 WPHY 42, 46 & 52 Excalibur 7018-1A871 60 & 65 LH-8018-C3 MRA873 Class 1, 2 & 3 LH 9018-B3 MRA907 30, 33, 36 & 40 (2)A913 60 & 65 LH-8018-C3 MRA935 45 (2)

50, 55 & 60 (1)65 LH-8018-C3 MR

A936 50 (2)60 (3)70 LH-8018-C3 MR

A945 50 Excalibur 7018-165 LH-8018-C3 MR

A992 (1)




A765 I (1)IIIV LH-8018-C3 MR

A769 36, 40 & 45 (2)45W & 50W (3), (6)50 (3)60 LH-8018-C3 MR

A782 Class 2 LH-110M MRA808 Excalibur 7018-1A812 80 LH-110M MRA822 (2), (4)A832 21V & 22V LH 9018-B3 MRA841 (1)A847 LH-78 MR, LH-8018-C3 MR, (10)A850 Class 1 & Class 2 (1)


49

ELECTRODE SELECTION BASED ON JOINT REQUIREMENTS

Types of Coating and Current

Digit Type of Coating Current

0 Cellulose sodium DC+

1 Cellulose potassium AC, DC±

2 Titania sodium AC, DC-

3 Titania potassium AC, DC+

4 Iron powder titania AC, DC±

5 Low hydrogen sodium DC+

6 Low hydrogen potassium AC, DC+

7 Iron powder iron oxide AC, DC±

8 Iron powder low hydrogen AC, DC±

Chemical Composition of Weld DepositSuffix %Mn %Ni %Cr %Mo %V

A1 .50

B1 .50 .50

B2 1.25 .50

B3 2.25 1.00

C1 2.50

C2 3.25

C3 1.00 .15 .35

D1/D2 1.25-.200 .25-.45

G(1) .50 .30 .20 .10min. min. min.

(1) Only one of the listed elements is required.

Welds on high strength and low alloy steelcan often only be made with one or twospecific electrodes. See pages 46 through48 for selection information. Full strength welds on mild steel canusually be made with a variety of differentstick electrodes. Selection of the best stickelectrode for maximum welding efficiencyshould be based on joint requirements.Here is a three-step method for consideringjoint requirements:1. Classify the joint as “Fast Freeze”,

“Fast Fill”, Fill Freeze, or a combinationof these.

2. Choose the electrode group“Fast Freeze”, “Fast Fill”, “Fill Freeze”, or Low Hydrogen from the following information.

3. Review the stick electrodes in the appropriate group to select the best stick electrode for the specific applications.

“Fast Freeze” WeldingThe weld deposit rapidly solidifies forall-position welding. “Fast Freeze” stickelectrodes have a high cellulose coatingwhich produces a deep penetration, force-ful spray-type arc with light slag coverage. • Use on plate 3/16 - 5/8” (4.8 - 15.9mm).• For 5/8” (15.9mm) and thicker plate,

the “Fill Freeze”, low hydrogen electrodesare more economical because deposit rates are higher and they make welds with fewer large beads for reduced cleaning time.

“Fast Fill” WeldingThe coating of “Fast Fill” stick electrodes is50%, iron powder and, therefore, producesa larger amount of weld deposition perelectrode. “Fast Fill” stick electrodes arelimited to level or slightly downhill (15° max)welding positions.• Groove, flat and horizontal fillets, and

lap welds in plate over 3/16” (4.8mm) .

• For the required tight fitup, plates are butted tight, a back-up strip is used, or a stringer bead is made with “Fill Freeze”stick electrodes.

“Fill Freeze” Welding (Sheet Metal)These stick electrodes have an increase ofweld deposition compared to “FastFreeze”, but can still be used for all-positionwelding. They have a titania rutile or limebased coating with the addition of ironpowder in some cases.• For sheet metal under 3/16” (4.8mm)

for electrodes that weld at high travel speeds with minimum skips, misses, slag entrapment and undercut.

• Fillet and lap welds in all-positions are best welded with EXX12 or EXX13 “Fill Freeze” electrode because of the excellent fast travel ability.

• Other types of joint are best welded with “Fast Freeze” stick electrodes because they have good puddle freezing ability.


AWS CLASSIFICATIONS

NOTE: 1 Joining electrodes, non CVN ratedThese electrodes (see below) and others of thesame AWS classification, are not required todeposit weld metal capable of delivering any mini-mum specified CVN properties. It should not beused in applications where minimum specified CVNproperties are required. Typical applications whereminimum specified CVN properties are requiredinclude, but are not restricted to, bridges, pressurevessels, and buildings in seismic zones. The user ofthis product is responsible for determining whetherminimum CVN properties are required for the spe-cific application.

Fleetweld 7Fleetweld 22Fleetweld 37Fleetweld 47Jetweld 3

NOTE: 2 Joining electrodes, non-low hydrogen These electrodes (see below) and others of thesame AWS classification, are not required todeposit weld metal that is low in diffusible hydrogen.Therefore, these electrodes should not be used inapplications where the hydrogen content of theweld metal is required to be controlled, such asapplications that involve steels with higher carbonand alloy content, and higher strength.

Fleetweld 5P Shield-Arc 85Fleetweld 5P+ Shield-Arc HYPFleetweld 35 Shield-Arc HYP+Fleetweld 35LS Fleetweld 47Fleetweld 180 Jetweld 1Fleetweld 7 Jetweld 3Fleetweld 37 Shield-Arc 70+Fleetweld 22 Shield-Arc 80

50

STORING AND RE-DRYING STICK ELECTRODES

Storing Low Hydrogen Electrodes

All low hydrogen electrodes must be dry to perform properly.Unopened Lincoln hermetically sealed containers provideexcellent protection in good storage conditions. Opened cansshould be stored in a cabinet at 250° - 300°F (120° - 150°C).

Coating moisture pickup in low hydrogen electrode is impor-tant because it may result in hydrogen induced cracking, par-ticularly in steels with 80,000 psi (550 MPa) and higher yieldstrength. Moisture resistant types have a high resistance tocoating moisture pickup and, if properly stored, will be lesssusceptible to this problem, regardless of the yield strength ofthe steel being welded. Specific code requirements mayindicate exposure limits different from these guidelines.

All low hydrogen electrodes should be stored properly, eventhose with high resistance to coating moisture pickup. It isrecommended that standard EXX18 electrodes be supplied towelders twice per shift. Moisture resistant types may be leftout for up to 9 hours.

When containers are punctured or opened so the electrode isexposed to the air for a few days, low hydrogen electrodesmay pick up moisture. Depending upon the amount ofmoisture, it will damage weld quality in the following ways:

1. A small amount of moisture in low hydrogen electrodes maycause porosity. Detection of this condition requires x-rayinspection or destructive testing. If the base metal or weldmetal exceeds 80,000 psi (550 MPa) yield strength, thismoisture may contribute to underbead or weld cracking.

2. A relatively high amount of moisture in low hydrogenelectrode causes visible external porosity in addition tointernal porosity. It also may cause excessive slag fluidity,a rough weld surface and difficult slag removal.

3. Severe moisture pickup can cause weld cracks in addition tounderbead cracking, severe porosity, poor appearance andslag problems.

Re-drying Low Hydrogen Electrodes

Re-drying, when done correctly, restores the electrodes’ abilityto deposit quality welds. Proper re-drying temperaturedepends upon the electrode type and its condition. Conditionnumber 1 listed below, is the most common.

One hour at the listed final temperature is satisfactory. DONOT dry electrodes at higher temperatures. Several hours atlower temperatures is not equivalent to using the specifiedrequirements.

Electrodes of the E8018 and higher strength classificationsshould preferably be given no more than three 1-hour re-driesin the 700° - 800°F (370° - 430°C) range. This minimizes thepossibility of oxidation of alloys in the coating resulting in lowerthan normal tensile or impact properties.

Any low hydrogen electrode should be discarded if excessivere-drying causes the coating to become fragile and flake orbreak off while welding, or if there is a noticeable difference inhandling or arc characteristics, such as insufficient arc force.

Electrodes to be re-dried should be removed from the can andspread on the furnace because:

1. Each electrode must reach the drying temperature.

2. The cardboard can liners char at about 350°F (180°C),damaging adjacent electrodes.

Final Re-drying Temperature

Pre-drying E8018, E9018,Condition Temperature (1) E7018, E7028 E10018, E11018

Electrodes exposed to air for less than one week; 650° - 750°F 700° - 800°Fno direct contact with water. — (340° - 400°C) (370° - 430°C)

Electrodes which have come in direct contact with 180° - 220°F 650° - 750°F 700° - 800°Fwater or which have been exposed to high humidity (80° - 105°C) (340° - 400°C) (370° - 430°C)

(1) Pre-dry for 1-2 hours. This will minimize the tendency for coating cracks or oxidation of the alloys in the coating.

RE-DRYING CONDITIONS — LOW HYDROGEN


51

STORING AND RE-DRYING STICK ELECTRODES

Storing and Re-drying Non-Low Hydrogen Electrodes

Electrodes in unopened Lincoln cans or cartons retain theproper moisture content indefinitely when stored in goodcondition.

If exposed to humid air for long periods of time, electrodesfrom opened containers may pick up enough moisture toaffect operating characteristics or weld quality. If moistureappears to be a problem, store electrodes from the openedcontainers in heated cabinets at 100° to 120°F (40° to 50°C).DO NOT use higher temperatures, particularly for electrodesfrom the “Fast Freeze” group.

Some electrodes from wet containers or long exposure to highhumidity can be re-dried. Follow the procedures below foreach type.

Using longer drying times or higher temperatures caneasily damage the electrodes.

For drying, remove the electrodes from the container andspread them out in the furnace because:

1. Each electrode must reach the drying temperature.

2. The cardboard can liners char at about 350°F (180°C), damaging adjacent electrodes.

Final Re-DryingElectrode Electrode Group Temperature Time

E6010: Fleetweld 5P, 5P+ Fast Freeze — Excessive moisture is indicated by a noisyE6011: Fleetweld 35, 35LS, 180 arc and high spatter, rusty core wire at the holder end or E7010-A1: SA-85(1) objectionable coating blisters while welding. Not —E7010-G: SA-HYP(1), SA-HYP+(1) Once a can has been opened the electrode should be recommendedE7018: 7018AC, Jet-LH 78 MR, used as soon as possible. Rebaking of this group of

Excalibur 7018, 7018-1, electrodes is not recommended.Jetweld LH-73, LH-70

E7028: Jetweld LH-3800E8010-G: SA-70+(1), SA-80(1)

E9010-G: SA-90(1)

E7024: Jetweld 1, 3 Fast Fill — Excessive moisture is indicated by a noisy or E6027: Jetweld 2 “digging” arc, high spatter, tight slag, or undercut. Pre-dry 400° - 500°F 30 - 45

unusually damp electrodes for 30 - 45 minutes at 200°F to (200 - 260°C) minutes230°F (90° - 110°C) before final drying to minimize cracking of the coating.

E6012: Fleetweld 7 Fill Freeze — Excessive moisture is indicated by a noisy orE6013: Fleetweld 37 “digging” arc, high spatter, tight slag or undercut. 300° - 350°F 20 - 30 E7014: Fleetweld 47 pre-dry unusually damp electrodes for 30 - 45 minutes (150° - 180°C) minutesE6022: Fleetweld 22 at 200° - 230°F (90° - 110°C) before final drying to

minimize cracking of the coating.

(1) Pre-dry for 1-2 hours. This will minimize the tendency for coating cracks or oxidation of the alloys in the coating.

RE-DRYING CONDITIONS — NON-LOW HYDROGEN

Customer Assistance Policy

The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cut-ting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasersmay ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the bestinformation in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes noliability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitnessfor any customer’s particular purpose, with respect to such information or advice. As a matter of practical consideration, we alsocannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does theprovision of information or advice create, expand or alter any warranty with respect to the sale of our products.

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely withinthe control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect theresults obtained in applying this type of fabrication methods and service requirements.


DISTRIBUTED BY:

THE LINCOLN ELECTRIC COMPANY22801 St. Clair Ave.

Cleveland, Ohio 44117-1199

TEL: 216.481.8100 • FAX: 216.486.1751

lincolnelectric.com

THE WELDING EXPERTS

Stick C2.10 2/02

LINCOLN NORTH AMERICADISTRICT SALES OFFICES

U.S.A.ALABAMA

BIRMINGHAM 35124-1156 (205) 988-8232MOBILE 36582(251) 443-6524

ALASKAContact SEATTLE District Office(206) 575-2456

ARIZONAPHOENIX 85260-1768(480) 348-2004

ARKANSASLITTLE ROCK 72032-4371(501) 764-0480

CALIFORNIAFRESNO 93722-3949(559) 276-0110LOS ANGELES 90670-2936(562) 906-7700SACRAMENTO 95677-4729(916) 630-1885SAN DIEGO 92108-3911(619) 208-9001SAN FRANCISCO 94550-9657(925) 443-9353

COLORADODENVER 80112-5115(303) 742-8887

CONNECTICUTNORTH HAVEN 06238-1090(860) 742-8887

WASHINGTON DCHERNDON, VA 20170-5227(703) 904-7735

FLORIDAJACKSONVILLE 32216-4634(904) 642-3177MIAMI 33178-1175(305) 888-3203ORLANDO 32714-1974(407) 788-8557TAMPA 33594-6387(770) 475-0955

GEORGIAATLANTA 30076-4914(770) 475-0955SAVANNAH 31324-5180(912) 727-4286

LATIN AMERICAMiami, Florida U.S.A. Phone: (305) 888-3203

EUROPEThe Netherlands Phone: 31 24 3522 911

RUSSIA, AFRICA & MIDDLE EASTCleveland, Ohio U.S.A.Phone: (216) 481-8100

ASIA PACIFICSingaporePhone: 65 276 0878

HAWAIISee SEATTLEDistrict Office(206) 575-2456

IDAHOBOISE 83616-6646(208) 938-2302

ILLINOISCHICAGO 60527-5629(630) 920-1500PEORIA 60527-5629(630) 920-1500

INDIANAEVANSVILLE 47630(812) 842-2775FT. WAYNE 46825-5547(219) 484-4422SOUTH BEND 46561-9160(219) 674-5523INDIANAPOLIS 46038-9459(317) 845-8445

IOWACEDAR RAPIDS 52402-3160(319) 362-6804DAVENPORT 52806-1344(563) 386-6522DES MOINES 50265-6218(515) 224-4121

KANSASKANSAS CITY 66214-1625(913) 894-0888WICHITA 67037-9614(316) 788-7367

KENTUCKYLOUISVILLE 47112-7025(502) 727-7335

LOUISIANABATON ROUGE 70808-3150(225) 922-5151LAFAYETTE 70507-3126(337) 886-1090SHREVEPORT 71108-2521(318) 869-3531

MARYLANDBALTIMORE 21050-3067(443) 831-0416

MASSACHUSETTSBOSTON 02452-8405(781) 899-2010

MICHIGANDETROIT 48034-4005(248) 353-9680FLUSHING 48433-1855(810) 487-1310GRAND RAPIDS 49512-3924(616) 942-8780

MINNESOTAMINNEAPOLIS 55447-5435(612) 551-1990

MISSISSIPPIJACKSON 39212-9635(601) 372-7679

MISSOURIKANSAS CITY (KS) 66214-1625(913) 894-0888ST. LOUIS 63146-3572(314) 993-5465SPRINGFIELD 65804(417) 823-0574

MONTANAContact SEATTLEDistrict Office(206) 575-2456

NEBRASKALINCOLN 68521-4806(402) 474-5697OMAHA 68046-2826(402) 339-1809

NEW JERSEYEDISON 08837-3939(732) 225-2000

NEW MEXICOALBUQUERQUE 87008(505) 286-4801

NEW YORKALBANY (315) 432-0281BUFFALO (315) 432-0281NEW YORK CITY(888) 269-6755SYRACUSE 13057-1040(315) 432-0281

NORTH CAROLINACHARLOTTE 28273-6200(704) 588-3251RALEIGH 27604-8456(919) 231-5855

OHIOAKRON 44236-4680(330) 342-8009CINCINNATI 45242-3706(513) 554-4440CLEVELAND 44143-1433(216) 289-4160COLUMBUS 43221-4073(614) 488-7913DAYTON 45458(937) 885-6964TOLEDO 43528-9483(419) 867-7284

OKLAHOMAOKLAHOMA CITY 73119-2416(405) 686-1170TULSA 74146-1622(918) 622-9353

OREGONPORTLAND 97220-6800(503) 528-0553

PENNSYLVANIAERIE 16506-2979(814) 835-3531JOHNSTOWN 15905-2506(814) 535-5895PHILADELPHIA 19008-4310(610) 543-9462PITTSBURGH 15275-1002(412) 787-7733YORK 17404-1144(717) 764-6565

SOUTH CAROLINAGREENVILLE 29681-4724(864) 967-4157COLUMBIA 29209(803) 783-2851

SOUTH DAKOTASIOUX FALLS 57108-2609(605) 339-6522

TENNESSEEKNOXVILLE 37923-4506(865) 693-5513MEMPHIS 38115-5946(901) 363-1075NASHVILLE 37027(615) 236-1144TRI-CITIES 37601-3411(423) 928-6047

TEXASDALLAS 76051-7602(817) 329-9353HOUSTON 77060-3143(281) 847-9444SAN ANTONIO 78133-3502(830) 964-2421

UTAHMIDVALE 84047-3759(801) 233-9353

VIRGINIAHERNDON 20170-5227Washington, D.C.(703) 904-7735ROANOKE(703) 904-7735WILLIAMSBURG 23602-7048(757) 870-5508

WASHINGTONSEATTLE 98188-7615(206) 575-2456SPOKANE 99005-9637(509) 468-2770

WEST VIRGINIACHARLESTON 25526-9796(304) 757-9862

WISCONSINGREEN BAY 54302-1829(920) 435-1012MILWAUKEE 53186-0403(262) 650-9364

CANADAALBERTA

CALGARY T2H 2M3(403) 253-9600EDMONTON T6H 2K1(403) 436-7385WINNIPEG R3N 0C7(204) 488-6398

BRITISH COLUMBIAVANCOUVER V3B 7A2(604) 844-5209

MARITIMESNOVA SCOTIA B2X 3N2(902) 434-2725

MANITOBAWINNIPEG R3N 0C7(204) 488-6398

ONTARIOTORONTO M4G 2B9(416) 421-2600

QUEBECMONTREAL J5Y 2G3(514) 654-3121

LINCOLN INTERNATIONAL HEADQUARTERS

HARRIS CALORIFIC DIVISION2345 Murphy Blvd., Gainesville, Georgia 30504 U.S.A.

Phone: 1-800-241-0804 • Fax: (770) 535-0544 • Web Site: www.harriscal.com

lincoln electrode

Documents