lightworks v12.5.0 quick start guide
TRANSCRIPT
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
1/16
Lightworks v12.5
Quick Start Guide
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
2/16
2 TP-00238-01
Lightworks v12.5
Copyright and Disclaimer
Copyright 2015 by EditShare
This document, as well as any software described in it, is furnished under either a license or aconfidentiality agreement, is confidential to EditShare, and may be used or copied only in accordance
with the above mentioned agreements. The information in this manual is furnished for your use onlyand is subject to change without notice. EditShare assumes no responsibility or liability for any errorsor inaccuracies that might appear in this document.
This Documentation is the property of EditShare and is provided in accordance with an EditSharelicense agreement. Copying, modifying, or distributing this Documentation in violation of the licenseagreement, Copyright Laws of England and Wales, or the Copyright Laws of any applicable foreign
jurisdiction is expressly prohibited.
EditShare is a registered trademark of EditShare in the US and other countries.
Avid is a registered trademark of Avid Technology, Inc. DAVE is a registered trademark of ThursbySoftware Systems, Inc. Final Cut Pro, Leopard, Macintosh, and Macintosh OS are registered trademarksof Apple, Inc. Premiere is a registered trademark of Adobe, Inc. Windows is a registered trademark ofMicrosoft Corporation. All other brand and product names are trademarks or registered trademarks oftheir respective companies and are hereby acknowledged.
To the best of our knowledge, the information in this document is accurate; however, EditShareassumes no responsibility or liability for the accuracy or completeness of this information. Mention oftrade names or commercial products does not constitute endorsement by EditShare except whereexplicitly stated.
EditShare EMEAClifton HouseBunnian PlaceBasingstokeHampshire, RG21 7JEEngland
http://www.editshare.com
September 28, 2015
Tel: +44 (0) 20 7183 2255
Fax: +44 (0) 20 7183 2256Email: [email protected]
http://www.editshare.com/http://www.editshare.com/ -
7/24/2019 Lightworks v12.5.0 Quick Start Guide
3/16
TP-00238-01 3
License Activation
License Activation Creating a Project
For:
Create a Lightworks account at www.lwks.com
Optional: Purchase Lightworks Pro license (you can always
upgrade later )
Install Lightworks and start the application:
First Time Activation
Lightworks Pro :
Select a license from the dialog box and click Activate
Enter your user
name and
password
Click to start
activation
Installing Software
Activation without Internet connection
Upgrading to Lightworks Pro
see Lightworks Installation and Activation Guide
* Internet Connection required
Click to start
Lightworks
Lightworks Free :
Type a name for your Project here
Select Frame Rate
If the frame rate of your
media is unknown,
select Auto
New projects display
in this panel
Project card opens
Click on
Video tab
From the pop-up, select a project
output rate from the Format list
You can set an output rate that differs from the
project frame rate, e.g. if you want to play out a24-frame project to PAL or NTSC
Click outside the Project card to close it.
At the top-left corner of thescreen, click on the Project name
Click to open selected project
Click to close Project and
return to Project Browser
*
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
4/16
4 TP-00238-01
Lightworks v12.5
Toolbar
Playback Control Options
Shortcut Keys
See Default Keyboard Shortcuts on page 15
Record
Opens Record tool for recording new clips
Import
Opens the Select Files to Import dialog box
Edit
Opens the viewer and timeline for new edit
ontent Manager
Opens the Content Manager tool
Search
Opens the Search tool
Playout
Opens Playout Tool for playing an edit to
tape
Export
Opens the Export tool
Editor Preferences
Opens the Editor Preferences dialog box
Controls display on each viewer
Click to select option
for controls
Click to open
Preferences dialog box.
Controls display at bottomof screen
Controls are not
displayed
Click Import to select Avid or
Final Cut Pro shortcuts
Import Preferences box opens
Select required Preferences file and click OK
Click to move
up one folder
Click to view or change
current Key shortcuts
C:\Users\Public\Documents\Lightworks\Preferences
usr/share/lightworks/Preferences
Located in the Lightworks.app bundle:Lightworks .app/Contents/Resources/Preferences
Win 7,8
Linux
Mac OS X
OS
Default Locations for Preferences Files
Location
Click to open
Preferences dialog box
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
5/16
TP-00238-01 5
Content Manager
Content Manager
Creating a Bin
Type directly in Bin label
to rename it
Click to create a new
empty Bin
Overview
Tile View
List View
Click to hide or reveal
Content List panel
Select view by clicking on
any item in Content List
Results display in main panel
Click to toggle between
Tile and List views
Click to browse backwards and
forwards through Content Lis t
Click to toggle Content Manager
ON and OFF
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
6/16
6 TP-00238-01
Lightworks v12.5
Importing Clips
Click the Import icon to open the Select Files to Import dialog box
Formats or Rates
shown in RED denote
clip is not compatible
(see note)
Click to import selected
items
(Option): Type filename directly intotext box
Click Cogs icon for
Transcoding options
Click individual item to
select
Click for drop down list of
shortcuts, drives, etc.
Imported clips display in
the Recent filter of the
Content Manager
Clips with incompatible frame rates may be playable in a newproject set to the same frame rate as the cl ip
Click tab to select all
clips in folder
Transcode Options
File Selection
Incompatible video formats may require additional Codecs to
be installed
SHIFT+Click or Ctrl+Clickto select multiple items
Set Transcode / Copy options
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
7/16
TP-00238-01 7
Playing Clips
Playing Clips
To enable global playback controls, see Playback Control
Options on page 4.
Double-c lick thumbnail
(List or Tile view) to
open Clip in Source
Viewer
Source Vi ewer
End of Clip
Forward one Frame
Start of Clip
Back one Frame
Play / Pause
Playback Controls
Click to open Filecard
(see Logging )
Click to open Timeline
Timeline
Play Source Viewer content using Playback Controls
on viewer or at bottom of screen
Hover mouse over Thumbnail (Tile
View only) to reveal short menu
Open Viewer
Timeline
Filecard
Bin (List View) *
Bin (Til e View) *
Play tile using Playback Controls at
bottom of screen (if visible) or usingshortcut keys
Default Shortcuts
- Play backwards
- Pause
- Play forwards
j
k
l
* Content List panel is hidden
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
8/16
8 TP-00238-01
Lightworks v12.5
Logging
Select a text box in the Filecard and type the information you want .
Open Clip in Source Viewer ,and click on Filecard button .
Fields that cannot bechanged.
Text entered here appears over Clip
thumbnail (Tile View).
Click here to open folder
containing original Clip .
Click to close.
You can also add information directly into the List View of the Content Manager / Bin
Information about each clip (Metadata) is held in a Filecard
To update a Filecard :
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
9/16
TP-00238-01 9
Marking a Section on a Source
Marking a Section on a Source
Using the Playback
Controls , stop the Clip
where you want your
clip to end
Using the Playback
Controls, stop the Clip
at the position you want
your clip to start.
Double -click thumbnail (List or Tile
view) to open Clip in Source Viewer
Source Viewer
Project Bin
Use the Playback Controls on viewer
to move through the clip , and to mark
IN and OUT points
Click the IN button to
set IN Point (Playback
marker changes from
RED to BLUE)
Click the OUT button to
set the OUT Point
The portion betweenthe IN and OUT points
is now selected
Set the In Point as described above (Mark)
Stop the Clip where you want your subclip to
end (Park)
The marked section is ready
1.
2.
3.
Mark and Park
Click to make subclip of
marked section or entire clip
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
10/16
10 TP-00238-01
Lightworks v12.5
Building the Storyline
Click the Edit icon to open an (empty) Edit viewer and Timeline
Move the frame marker on the Edit to
where you want to insert the new clip
Opening an Edit Viewer
Adding More Content
Select the next clip from your bin and open
in a Source Viewer
Repeat for each clip you want to appear in the Storyline
Click to insert the entire clip or the
marked section into the empty edit *
Click to insert the entire clip or
the marked section into the edit *
Alternatively, click
(if displayed)
or press v to insert
*
Click on the viewer containing the clip (with or without
a marked section) you want to add to the Edit
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
11/16
TP-00238-01 11
Trimming
Trimming
Trim View
Trimming an Incoming Clip
To enable / disable Trim View,
click the Edit Viewer Cogs icon
and select Trimview > Yes(enable) or No (disable)
Trim View enables you to view
both sides of a cut. It is enabled
by default
Cut is unjoined on outgoing side
A small curl is added before the cut
Left-click any track close to end
of cut you want to trim
Trimming an Outgoing Clip
Left-click any track close to start
of cut you want to trim
Cut is unjoined on incoming side
A small curl is added after the cut
Shorten / lengthen both sides of the cut by dragging
the cut point left or right with your mouse
-or clicking Play / ReversePlayback keys, or L and J
shortcut keys
Shorten / lengthen both sides of the cut by dragging
the cut point left or right with your mouse
Outgoing Clip Incoming Clip
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
12/16
12 TP-00238-01
Lightworks v12.5
Trimming /Continued
Moving a Cut
Slipping a Clip
The cut is unjoined down the middle ,
with both sides showing a curl
Unjoin the cut by left-
clicking directly on it
Shorten / lengthen either side of the cut by dragging the
cut point left or right with your mouse
Sliding a Clip
Left-click to left of the clipyou want to slide
Cut is unjoined on outgoing side
A small curl is added before the cut
Cut is unjoined on the incoming side
A small curl is added after the cut
Left-click to the right of the clipyou want to slide
Left -click any track close to start
of clip you want to slip
Cut is unjoined on incoming side
A small curl is added after the cut
Cut is unjoined on outgoing side
A small curl is added before the cut
Left-click any track close to end
of clip you want to slip
Shorten or lengthen cuts on either side of clip
by dragging your mouse left or right
- or by clicking Play / ReversePlayback keys, or L and Jshortcut keys
Shorten / lengthen the cuts either side of middle clip by
dragging the clip left or right with your mouse
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
13/16
TP-00238-01 13
Simple Transitions
Simple Transitions
Position timeline marker on the cut
where you want a transition
Mix Transition Types
Blend
Dissolve
Luma Wipe
Masked Blend
Push
Squeeze
Wipe
The transition is applied to your edit
Click on the Effects button
Select Video > Mixes f rom the
drop down list
Select the transition you require
from Add Effects window
Select Start / Finish option for the
transition
Set duration of transition
Click Add
The Add Effects window opens
Blends two or more overlapping images.
Simulates a film-type dissolve.
Transition between images based on their luminance.
A blend between two images using an explici t mask.
Range of effects where transition is made by one e lement pushing another off screen.
Range of effects where transition is made by one element entering the screen whilesqueezing down the other
Wipes the screen, transitioning between outgoing and incoming elements.
Alternatively right-click on timelinemarker and from pop-up menu
select Transitions > Add > Effect
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
14/16
14 TP-00238-01
Lightworks v12.5
Export
Uploading
to
YouTube
Click the Export icon - or drag onto Clip or Edit
The Export dialog box opens
To change destination folder ,
click to open dialog box
Click to select Clip, Edit or Bin fromdrop down list
Click to open Export Format dialogbox
Select required format
(edit lists, media files or
camera formats)Type name for output file
- or leave as Automatic
Click to start Export
Panel opens displaying background tasks
Progress Bar and
Time Remaining
Counter
Click to open folder
containing exported
file
Export Complete
Tick box
Add tags for your
video
Click to
start upload
Type your YouTube
login details
Alternatively , right- click on Clip, Edit or
Bin, and select Export
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
15/16
TP-00238-01 15
Default Keyboard Shortcuts
Default Keyboard Shortcuts
Add Tracks backspace
Audio FX F10
Audio Mixer Insert
Back 1 Frame , commaBack 10 Frames m
Backtime \
Browse Project Contents F5
Clipboard Insert f
Clipboard Replace g
Clipboard Source d
Cue ' apostrophe
Cue Panel F11
Delete x
Empty Cut c
Export F2
File Card F4
Forward 1 Frame . full stop
Forward 10 Frames /
Frame - Left Left Arrow
Frame - Right Right Arrow
Full Screen F12
Import F1
Insert v
Join / Unjoin Tab
Jump - End ; semicolon
Jump Start h
Last Cut a
Last Node down arrow
Layouts End
Mark Clip ]Mark In i
Mark Out o
Move Cut u
Next Cut s
Next Node up arrow
Nudge Backwards - Numlock OFF
Nudge Forwards + Numlock OFF
Pause k
Play Forward l
Play Reverse j
Pop Out Tile n
Project Card HomeProjects Delete
Projects Menu Home Numlock OFF
Remove z
Replace b
Rooms Menu End Numlock OFF
Routing FX F7
Search F3
Slide t
Slip y
Stop k
Swap [
Switch Esc
Toggle A1 3
Toggle A2 4
Toggle A3 5
Toggle A4 6
Toggle A5 7
Toggle A6 8
Toggle A7 9
Toggle A8 0
Toggle Play / Pause Space Bar
Toggle V1 1
Toggle V2 2
Transitions F8
Trim In w
Trim Last Out q
Trim Next In r
Trim Out e
Uncue #
Undo / Redo `
Unmark p
Vectorscope PgUp
Visual FX F9
Zoom In =
Zoom Out - minus
-
7/24/2019 Lightworks v12.5.0 Quick Start Guide
16/16
Further Reading
For detailed information on how to use Lightworks, please refer to the EditShare LightworksUser Guide, which may be downloaded from www.lwks.com. There are also some videotutorials to assist you at www.lwks.com/videotutorials.
Troubleshooting
If you experience an issue with your Lightworks installation, or something is not working asexpected, visit our FAQ page at http://www.lwks.com/faqwhere you can type in a questionrelating to the issue and view the search results. If you do not find an answer to yourquestion, you can refer to the Lightworks forums at http://www.lwks.com/forum
Technical Support ContractsFor assistance beyond this document and that provided in your Lightworks documentation,you can purchase a Technical Support Contract for Lightworks from our online shop athttp://www.lwks.com/shop. Technical Support is by Telephone and Email.
When you contact Technical Support, have the exact version number of your Lightworksimplementation ready as well as your support agreement number.