lightstack 8 ultra high density fiber...

W W W . S I E M O N . C O M

LightStack® 8 Ultra High Density Fiber Enclosure

As today’s high density Data Centers migrate from 10 to 40 and 100 gigabit speeds and beyond, they require low loss plug and play fiber solutions that enable 100% fiber utilization in advanced high speed Base 8 parallel optic applications, eliminating the need for conversion cords or conversion modules.

Part of Siemon’s LightHouse™ Advanced Fiber Cabling Solutions, the LightStack 8 Ultra High Density Plug and Play System offers superior density, port access and cable management in a sleek, modern enclosure. It offers the most simplest form of migration from duplex 10 Gig to 8-fiber 40/100 Gig and future 8-fiber 200/400 Gig applications. Siemon also offers a variety of Base 8 MTP trunks, jumpers and hybrid equipment cords for use with LightStack 8, providing a complete end-to-end Base 8 plug and play fiber system.

Innovative labeling Drop-down label strip holder for high visibility

Mounting optionsRack mounting brackets can be attached at any of 3 horizontal positions

Visually appealing magnetic door– Easy to open and close– Eliminates potential pinch points

LightStack 8 1U Front View2A

Advanced Fibre Cabl ing Solutions

™

Ultra High Density144 fibers per 1U (LC interface) 864 fibers per 1U (MTP interface)576 fibers per 4U (LC interface) 3456 fibers per 4U (MTP interface)

Cable Management ClipsUnlatch and swing open for full access to any jumper

High Capacity DesignHandles both traditional 2mm zip-cord and interconnect tight buffered jumper types


LIGHTSTACK 8 ENCLOSURE DIMENSIONS

1U 4U

Height 43.9mm (1.73 in.) 176.8mm (6.96 in.)

Width 482.3mm (18.99 in.) 482.3mm (18.99 in.)

Depth 530.6mm (20.89 in.) 530.6mm (20.89 in.)

Weight 9.53kg (21 lbs.) 23.58kg (52 lbs.)

Color Black Enclosure, Gray Door Black Enclosure, Gray Door

Label Size 204.5mm x 23.5mm (8.05 in. x .925 in.) 204.5mm x 93mm (8.05 in. x 3.66 in.)

Product Information

Sliding Bottom Rear Divider Acts as a rear cable divider between stacked enclosures (in the out position). Pushes inward to provide complete access to connectivity at the rear of stacked enclosures

Strain Relief Swivel tie down allows for simplistic approach for anchoring trunks and eliminating pinch points

Module InsertionQuick and easy front or rear module insertion and rear only removal

Ordering InformationPart Number Description

LS8-1U-01 ................. 1U Enclosure, 144 LC fibers or 864 MTP fibers, mounts in 19 in. racks or cabinets

LS8-4U-01 ................. 4U Enclosure, 576 LC fibers or 3456 MTP fibers, mounts in 19 in. racks or cabinets

LightStack 8 4U Rear ViewLightStack 8 4U Front View


PERFORMANCE SPECIFICATIONS

Insertion Loss (dB) Return Loss (dB) Insertion Loss (dB) Return Loss (dB)

Multimode Singlemode

MTP 0.20 20 0.60 60

LC 0.15 30 0.40 55

MTP to LC Module 0.35 20 1.00 55

LightStack® 8 Modules

LC Adapter Plate

MTP Adapter Plate

• Used in conjunction with LC BladePatch® RazorCore™ trunks for rear connections only

• Available in beige and aqua (MM) and blue (SM)• 8 LC fibers

• Ultra slim design to achieve maximum fiber density• Used with Base 8 MTP trunks and MTP jumpers or MTP to LC cords• Up to 32 fiber count• Handles in the rear of module helps facilitate removal from the back

of the enclosure

* Optional Shuttered LC adapters feature a small plastic shutter door that opens upon insertion without touching the connector endface and springs back into the closed position upon removal to ensure protection of empty ports.

Product Information

Ordering InformationPart Number Description

LS8-LS5V-04 ............ Module, 8 LC-to-MTP fibers, OM4, XGLO 550, Shutter Aqua LC adapters, LC Aqua adaptersLS8-LSEV-04 ............ Module, 8 LC-to-MTP fibers, OM4, XGLO 550, Shuttered Erika Violet LC and Erika Violet MTP adaptersLS8-LSSM-04 ........... Module, 8 LC-to-MTP fibers, Singlemode, Shuttered Blue LC adapters, Black MTP adaptersLS8-LC5V-04 ............ Module, 8 LC-to-MTP fibers, OM4, XGLO 550, Aqua LC and MTP adaptersLS8-LCEV-04 ............ Module, 8 LC-to-MTP fibers, OM4, XGLO 550, Erika Violet LC and MTP adaptersLS8-LCSM-04 ........... Module, 8 LC-to-MTP fibers, Singlemode, Blue LC adapters, Black MTP adapters

LightStack® 8 MTP Adapter Plates

LightStack® 8 LC Adapter Plates

* Key Orientation B Only** Key Orientation C Only

LS8-MP(X)-04(X)(XX)

Adapter Color2 = 2 MTP Ports4 = 4 MTP Ports

MTP Port CountAQ = Aqua**EV = Erika Violet**BK = Black**GR = Gray*

B = Aligned (key up to key up)C = Opposed (key up to key down)

Key Orientation

LS8-L(X)8-04C-(XX)

Adapter ColorC = Standard LCS = Shuttered LC

Shutter Door OptionAQ = Aqua MultimodeEV = Erika VioletBG = Beige MultimodeBL = Blue Singlemode

Ultra Slim Design LightStack 8 modules have an ultra slim design to achieve maximum fiber density

Low Loss Low loss performance

High Fiber Count Up to 8 fiber count per module

Shuttered LC adapters Optional small plastic shutter door that opens upon insertion without touching the connector endface and springs back into the closed position upon removal to ensure protection of empty ports.

Standard Interfaces Base 8 MTP to 4 duplex LCs available in OM4 multimode and singlemode

Rear Module Handles Handles in the rear of module help facilitate removal from the back of the enclosure

Reference Siemon’s White Paper titled: “The Need for Low-Loss Multifiber Connectivity in Today’s Data Centre” for information and guidance on design options, channel models and distances for 10, 40, 100Gb Ethernet and Fibre Channel applications.

North AmericaP: (1) 860 945 4200

India Middle EastP: (971) 4 3689743

EuropeP: (44) 0 1932 571771

Asia PacificP: (61) 2 8977 7500

Siemon Interconnect SolutionsP: (1) 860 945 4213www.siemon.com/SIS

ChinaP: (86) 215385 0303

Latin America P: (571) 657 1950/51/52

Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.


SS

-Lig

htS

tack

8 R

ev E

11

/19

Combining Siemon’s reduced-diameter RazorCore™ cable with 8-fiber MTP connectors, Base 8 Plug and Play MTP Trunk Assemblies are designed to be quickly routed and connected to LightStack 8 Plug and Play Modules and MTP Adapter Plates.

Slemon’s Base 8 MTP jumpers are used to connect the MTP trunk backbone to the active equipment. The 8-fiber design ensures 100% utilization of fiber in 8-fiber 40/100G applications, while the compact design of the MTP footprint and Siemon’s 2mm (0.079 in.) diameter RazorCore™ cable achieves greater connectivity access, reduction In cable pathway congestion and improved airflow.

Base 8 MTP to LC Equipment Cords are ideal to facilitate interconnects or cross connects between active equipment. They are implemented using LightStack 8 MTP Adapter Plates to provide direct MTP to LC patching options.

Base 8 MTP to LC Hybrid Equipment Cords

Base 8 MTP to LC 4 X10G equipment cords offer a connectivity transition from one 8-fiber MTP connector to four duplex LC BladePatch connectors that feature an innovative push-pull boot design to control the latch, enabling easy access and removal in tight-fitting areas.

Base 8 MTP to LC BladePatch 4 X 10G Hybrid Equipment Cords

Base® 8 Plug and Trunk Assemblies

Siemon offers Base 8 MTP to MTP trunks, MTP 2mm jumpers and MTP to LC hybrid equipment cords for a complete end-to-end Base 8 plug and play fiber system. For more information, visit www.siemon.com/us/plug-and-play.

Base 8 MTP to MTP Trunks

Base 8 MTP 2mm Jumpers

lightstack 8 ultra high density fiber...

Documents