ALCATEL-LUCENT 9764 METRO CELL OUTDOORV1.0 B1/B2 WCDMA 1W

The Alcatel-Lucent 9764 Metro Cell Outdoor is a next-generation all-in-one metro cell, based on the Alcatel-Lucent groundbreaking lightRadio™ cube technology, which brings together the latest innovations in antennas, amplifiers and transceivers to minimize size and improve radio frequency (RF) performance. The Alcatel-Lucent 9764 Metro Cell Outdoor uses integrated direc-tional antennas to cost-effectively extend Wideband Code Division Multiple Access (WCDMA) coverage and high-speed packet access (HSPA) capacity to dense urban areas. It is ideal for covering hot spots, such as restaurants, shops, hotels and offices, from an outdoor location — and can also cover city streets with a significant range.

This document describes two models available for the 9764 MCO. The 9764 MCO v1.0 B1 WCDMA 1W model operates in 2100 MHz, with introduction Release BCR 3.06, while the 9764 MCO v1.0 B2 WCDMA 1W model operates in 1900 MHz, with introduction Release BCR 4.1.

The Alcatel-Lucent 9764 Metro Cell Outdoor is easily deployed almost anywhere without the complexity or cost associated with traditional macro cell site installation. With its small dimensions and volume, it can be mounted on a lamppost, pole or on the side of a building to deliver coverage and capacity directly to where they are needed. Network deployment and optimization costs are also significantly reduced with Self-Organizing Network (SON) features, powered by Bell Labs innovations. SON technology increases operational efficiency and network performance by automating network configuration and optimization.

The Alcatel-Lucent 9764 Metro Cell Outdoor is the latest enhancement to the industry-leading Alcatel-Lucent 9360 Small Cell solution. Field proven in large commercial networks, this fully integrated carrier-grade, end-to-end solution easily integrates into any operator’s existing Third Generation (3G) network.

The Alcatel-Lucent 9764 Metro Cell Outdoor is based on an innovative service module design that separates the mechani-cal, electrical and backhaul components into a 9764 Metro Dock and the baseband unit, radio unit and antenna components into a 9764 MCO WCDMA module. The 9764 MCO WCDMA module then plugs into the 9764 Metro Dock, allowing greater deployment flexibility and easier frequency swaps and technology upgrades.The Alcatel-Lucent 9764 Metro Cell Outdoor supports modular backhaul options as well as an optional 9764 MCO Wi-Fi Access Point (AP) module.

FEATUREs• Small, lightweight unit that is virtually

invisible when mounted on a lamppost, pole or wall

• Integrated fully digital directional antennas enabling higher throughput, lower interference and greater power efficiency

• 1-W output power at the antenna interface for bigger coverage

• Receive (Rx) diversity for improved signal quality and greater capacity

• Modular 9764 Metro Dock design supporting multiple backhaul options, including Gigabit Ethernet (GbE)

• Optional dual-band 9764 MCO Wi-Fi AP module pluggable into the 9764 MCO WCDMA module (common look and feel, joint backhauling and integrated antenna)

9764 MCO Front View

(showing 9764 MCO v1.0 B1/B2 WCDMA 1W model)

9764 MCO Front Back

(showing 9764 MCO v1.0 B1/B2 WCDMA 1W model + 9764 Metro Dock)

9764 MCO View Bottom

(showing 9764 MCO v1.0 B1/B2 WCDMA 1W model + 9764 Metro Dock)

www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2012 Alcatel-Lucent. All rights reserved. M2012104702 (November)

• High capacity, supporting 32 active users with full HSPA capacity

• Handovers to and from macro network

• Self-organizing network (SON) capabilities

• Real-time operational status and service monitoring

• Seamless, secure Wi-Fi interface

BENEFiTs• Easily deployed almost anywhere

• High range of coverage with strong signal strength within the coverage area

• Fast and reliable data connections and high data throughput

• Network deployment flexibility

• Interworks with Alcatel-Lucent 9365 Base Station Router (BSR) Gateway

• Extends WCDMA coverage and high-speed downlink packet access (HSDPA)/high-speed uplink packet access (HSUPA) capacity to both outdoor and indoor locations with a low total cost of ownership (TCO)

• Enhanced performance and fault management for public, operator-owned small cells

• Seamless mobility with simultaneous voice and data service continuity within a metro cell group and with the macro network

• Seamless, secure Wi-Fi interface provides access to a mobile service provider’s services.

• Wi-Fi integration increases coverage and capacity across 2G, 3G and 4G/LTE networks without impacting the current RAN design.

• The 9764 MCO Wi-Fi AP module’s advanced interference management features minimize any impact on macro network performance.

• Wi-Fi integration allows power supply efficiency from backhaul sharing.

• Optional dual-band 9764 MCO Wi-Fi AP provides additional access points, therefore more available spectrum for offloading.

TEChNiCAL spECiFiCATiONs• B1 refers to the 9764 MCO v1.0 B1

WCDMA 1W model.

• B2 refers to the 9764 MCO v1.0 B2 WCDMA 1W model.

physical dimensions• Height: B1: 350 mm (13.8 in.)/B2: 363 mm

(14.3 in.)

• Width: B1 and B2: 138 mm (5.4 in.)

• Depth: B1 and B2: 124 mm (4.9 in)

• Volume: B1 and B2: 5.5 L (1.5 G)

Weight• B1 and B2: With 9764 Metro Dock

mounted: 4.47 kg (9.85 lbs.)

• B1 and B2: Without 9764 Metro Dock mounted: 3.5 kg (7.7 lbs)

Mounting options• B1 and B2: Lamppost, pole, wall,

side of building

• B1 and B2: Vertical orientation

power supply• B1: Volts: 100-240 V AC/B2: -48V DC

• Power consumption: B1 and B2: <35 W with GbE backhaul at ambiant temperature

interfaces• B1 and B2: Two electrical or optical GbE

ports using small form factor pluggable (SFP) module

Optional 9764 MCO Wi-Fi Aps• B1 and B2: Dual-Band: Simultaneous support

of 2.4/5 GHz (802.11 b/g/n, 802.11a/n)

• B1 and B2: Supports carrier-grade Wi-Fi

• B1 and B2: Integrated antenna in the module

• B1 and B2: 2x2 MIMO (2x300 MB/s UL/DL)

Certifications (Europe)• B1: CE

Certifications (Us/Canada)• B2: FCC/UL

Compliance• B1: Basic requirements of the Directive

R&TTE 1999/5/EC on telecommunications terminal equipment, pertaining to electromagnetic interference, safety and health

• B1 and B2: RoHS

• B1 and B2: WEEE

• B1 and B2: IP65

Operating relative humidity • B1 and B2: 5% to 100%

Electrical safety • B1: EN 60950-1

• B2: UL 60950-1

health safety • B1: 1999/519/ec including EN 50383 and

EN 50385

• B2: OET (Office of Engineering & Technology) Bulletin 65 and RSS-102

Electromagnetic compatibility (EMC) B1:

• EN 301 489-1

• EN 301 489-23

• EN 301 908-1

• EN 301 908-3

• EN-55022 Class B/CISPR22 Class B

• EN-55024/CISPR 24

• 3GPP TS 25.113

B2:• FCC part 15

• FCC part 22

• FCC part 24

• 3GPP TS 25.113

Temperature range• B1 and B2: -40°C to +55°C

(-40°F to +131°F)

Radio characteristics• Operating bands: B1: 3GPP band 1 (2100

MHz/IMT)/B2: 3GPP band 2 (1900/PCS)

• B1 and B2: Maximum transmission power: 30 dBm (1W)

• B1 and B2: Directional antenna with >8 dBi minimum gain, 40°+/-5° vertical and 70°+/-5° horizontal half power beam width

• B1 and B2: 1-W output power at the antenna interface

• B1 and B2: 2 path receive diversity

• B1 and B2: Baseband capacity: 32 simultaneous active users

• B1 and B2: Maximum supported Radio Access Bearers (RAB)

¬ 21 Mb/s L1 HSDPA

¬ 5.7 Mb/s L1 HSUPA

• B1 and B2: Sensitivity: -111 dBm (3GPP target value)