lightplane 6 recessed - light forms2 lightplane 6 recessed - lp6r & lp6rt recessed 1. base model...
TRANSCRIPT
Configuration Sheet
Recessed
LIGHTPLANE 6 RECESSEDLP6R & LP6RT
LP6R LP6RT
2
LIGHTPLANE 6 RECESSED - LP6R & LP6RTRecessed
1. Base Model
LP6R Recessed - Trimless LP6RT Recessed - with Trim
2. Run Length
xxxxmm Enter length in mm for custom lengths.See Standard Lengths and Shapes PDF for standard products.
3. Lamping
LOW - xxxxK (example: LOW-4000K)
MED - xxxxK (example: MED-4000K)
HI - xxxxK (example: HI-4000K)
STD - TWHI - TWSTD - RGBW - xxxxK
HI - RGBW - xxxxK
4. Driver
1-10V 1-10V dimmingDALI DALI dimmingDMX DMX dimmingNONDIM Non-dimmableOTHER (Consult factory for options)
5. Finish
AL Standard, natural aluminiumBK Black powdercoatWH White powdercoatRAL/ ___ Specify RAL powdercoat (ex: #RAL/3003)BRONZE Bronze powdercoat
6. Additional options
EM 3 hour Emergency KitDALIEM 3 hour DALI Emergency Driver/BatteryDALIEMPRO 3 hour DALI EMPRO Emergency Driver/BatteryPIR-A PIR Absence DetectorPIR-P PIR Presence DetectorDALIPIR DALI PIR SensorOTHER Contact Factory
2
3
LIGHTPLANE 6 RECESSED - LP6R & LP6RTRecessed
Dimensions
Mounting Options
192mm308mm
153mm153mm
LP6R
3
LP6R & LP6RTRecessed
152mmLENS
LP6RT
152mmLENS
Light FormsArchitectural Lightingwww.lightforms.com
Registered in England No. 6750892Registered AddressUnit 7C Boeing Way International Trading Centre Middlesex, Ub2 5Lb
UKUnit 7C Boeing WayInternational Trading EstateMiddlesex UB2 5LB
T +44 (0)20 8571 3785F +44 (0)20 8090 3755E [email protected]
India353/2 Dr Hira Singh RoadCivil LinesLudhiana 141001Punjab, India
T +91 98 7280 0488
ChinaUnit 3, Building ANo. 9 Phoenix RoadTorch Development AreaZhongshan CityGuangdong China 528437
T +86 760 899 370 38F +86 760 899 370 39E [email protected]
4
LIGHTPLANE 6 RECESSED - LP6R & LP6RTRecessed
Housing100% recyclable, extruded architectural grade T6061 aluminium
EmergencyLuminaires can be wired for emergency circuit and/or emergency battery backup.Consult factory for options.
OptionsMitered CornersConsult factory for mitered corner angle options.
FinishStandard finish is “Ultimatte” aluminium - a smooth, clean and durable finish achieved from a deep-etch and two step clear anodizing process. White, Black, Bronze or custom RAL powdercoat options are also available.
WH - WHITE AL - ALUMINIUM
BK - BLACK BRONZE
Default canopy finish is to match fitting color, unless otherwise specified
Mitered Corners
RAL/____
LIGHT FORMS - CONFIGURATION SHEET - REV 1