lightning and surge protection...surge protection devices 18 abbreviations 25 index 26 contact 27 in...
TRANSCRIPT
www.dehn-international.comwww.dehn.co.uk
Lightning and Surge ProtectionSupplement Catalogue
Lightning Protection
2
Contents
Description PageEarth Electrodes / Earth Pits / Plates / Clamps 4Lightning Conductors 8Conductor Holders 10Clamps / Bimetal Components 12Equipotential Bonding 14Air-termination Rods and Systems 16Surge Protection Devices 18Abbreviations 25Index 26Contact 27
In addition to the material offered in this catalogue, DEHN (UK) Ltd have a full range of surge protection devices, external lightning / earthing protection components and safety equipment available.
Further details of our comprehensive product range can be found in our main catalogues or on our website www.dehn.co.uk
3
Earth Electrodes, Earth Pits, Plates, Clamps
4
Driving Stud
Material Diameter Weight Part No.
HT St 5/8´´UNC, approx. 16 mm 0.08 kg DS16
A Model
Lattice Earth Mats
Material Dimensions Weight Part No.
Cu 600 x 600 x 3 4.0 kg EPL663
Cu 900 x 900 x 3 7.2 kg EPL993
A Model
Earth plate lattice copper.
Couplings
Material Diameter Weight Part No.
MS 5/8´´UNC, approx. 16 mm 0.11 kg DCP16
Material Diameter Weight Part No.
MS 5/8´´UNC, approx. 16 mm, 16 hexagon
0.13 kg DCP16H
A Model
16 mm diameter coupling round version.
B Model
16 mm hexagonal coupling for earth rods.
Copperbond Earth Rods
Material Rod Length
Diameter Shank Diameter
Weight Part No.
St/Cu 1200 mm 16 mm 14.2 mm 1.53 kg DBS1612
A Model
Copperbond earth rod to BS6651.
Material Rod Length
Diameter Shank Diameter
Weight Part No.
St/Cu 1200 mm 16 mm 14.2 mm 1.53 kg DBR1612
B Model
Copperbond earth rod not to BS.
Material Rod Length
Diameter Weight Part No.
St/Cu 1200 mm 9.5 mm 0.61 kg DBR9512C
C Model
Copperbond earth rod domestic type with clamp not to BS.
Earth Rod Inspection Pits
Material Dimensions Weight Part No.
Concrete 280 x 280 x 130 mm 15.00 kg PIT2
Material Dimensions Weight Part No.
Plastic 250 x 195 x 220 mm 1.20 kg PIT3
A Model
Concrete earth pit with inspection lid.
B Model
Plastic earth pit lockable by allen key with inspection lid.
Earth Bars for use in Earth Pit
Material Hole Size Weight Part No.
Cu M10 0.49 kg PIT5
Material Hole Size Weight Part No.
Cu M10 0.49 kg PIT6
A Model
5 hole for PIT2.
B Model
5 hole for PIT3.
5
6
Conductive Concrete / Moisture Retaining Clay
Earthing Procedures To improve the earthing resistance
Application notes regarding the benefits and use of MARCONITE and BENTONITE.
IntroductionThe resistance achieved by an earth system is determined by several factors. Most important amongst these is the amount of earth electrode surface area in contact with the ground and the resistivity of the ground in the immediate location of the earth nest. Resistivity can either be measured by carrying out a soil resistivity test or approximate figures can be obtained by reference to “ground type resistivity tables“ which can be found in most national earthing stand-ards (such as BS 7430:2011, Code of practice for Earthing).In situations where a low earth resistance is required, and is difficult to obtain, a soil conditioning agent can be used to advantage, typical use being in boreholes or to surround earth plates and lattice mats. In both cases good conductivi-ty must be ensured between the electrode and the sur-rounding ground. If the resistivity of the ground is too high to achieve the desired system resistance, soil conditioning agents can be used to obtain a better ground contact and lower resistivity.
MarconiteBy adding marconite to cement in place of sand a concrete which is highly conductive is formed. This helps to lower the resistance of earth rods, plates etc.
Bentonite is a moisture retaining clay which when used as a backfill with earth rods or plates will reduce soil resistivity by retaining moisture around the earth rod.
By adding MARCONITE instead of the sand and aggregate used in a standard conctete mix a highly conductive con-crete is formed. Used as a backfill material around the earth electrodes, it provides a conductive medium increasing the surface area of the electrode and ensuring a highly conduc-tive path between the earth electrode and the surrounding ground. Being a concrete it provides a permanent solution.
BENTONITE is a moisture retaining clay consisting of sodium montmorillonite. By mixing BENTONITE with water the resultant slurry will swell to many times its original dry volume. When used as a backfill material, within a borehole earth system, it will continue to absorb water from the sur-rounding soil thus helping provide a stable earth resistance. This is also true when the clay is used to surround earth plates and lattice mats. It strongly adheres to the earth electrodes ensuring good electrical conductivity between the electrodes and surrounding ground.
Weight Part No.
25.00 kg CC1
Weight Part No.
20.00 kg CC2
A Model
Marconite.
B Model
Bentonite.
Rod to cable clamp
Material Clamping range Weight Part No.
Gun metal Rod 9.5 mm (min.) – 16 mm (max.)Conductor 10 mm2 (min.) – 70 mm2 (max.)
0.07 kg RCC1
A Model
Made from high strength brass alloys.
Earth Rod Clamp
Material Clamping range Weight Part No.
Gun metal For 16 mm rod and 25 x 3 mm tape
0.15 kg RTA1
A Model
Made from high strength gun metal.
Earth Rod to Cable Lug Clamp (Split Clamp)
Material Dimensions Weight Part No.
Gun metal 16 mm threaded 0.34 kg SCT16
Material Dimensions Weight Part No.
Gun metal 9.5 mm plain 0.08 kg SCP95
A Model
B Model
“U“ Bolt Rod Clamp
Material Clamping range Weight Part No.
Gun metal 16 mm to 25 mm 0.20 kg UCR305/315
Material Clamping range Weight Part No.
Gun metal 16 mm to 25 mm 0.26 kg UCR320
Material Clamping range Weight Part No.
Gun metal 70 – 185 mm2 0.39 kg UCR70
A Model
B Model
Allows 25 x 3 mm tape to be connec-ted via additional plate.
C Model
Rod to cable clamp (type GUV).
7
Lightning Conductors
8
Hard Drawn Copper Bar
A Model
Hard drawn copper bar supplied in 2 meter lengths.
Material Dimensions Weight/m Part No.
Cu 25 x 6 mm 1.33 kg HDB256
Cu 50 x 6 mm 2.67 kg HDB506
High Conducting Copper Strip
Material Dimensions Coil size Weight/m Part No.
Cu 25 x 3 mm 25 m* 0.67 kg TC2530
A Model
Bare coated copper strip.
Material Colour Dimensions Outside Dimensions
Coil Size
Part No.
Cu/PVC black 25 x 3 mm 28 x 6 mm 25 m* TPBL253
Cu/PVC brown 25 x 3 mm 28 x 6 mm 25 m* TPBN253
Cu/PVC green 25 x 3 mm 28 x 6 mm 25 m* TPGN253
Cu/PVC grey 25 x 3 mm 28 x 6 mm 25 m* TPGY253
Cu/PVC stone 25 x 3 mm 28 x 6 mm 25 m* TPST253
Cu/PVC white 25 x 3 mm 28 x 6 mm 25 m* TPWH253
B Model
PVC coated copper strip.Weight/m 0.77 kg
* approx.
Aluminium Strip
A Model
Bare aluminium strip.
B Model
PVC covered aluminium strip.Weight/m 0.30 kg.
Material Colour Dimensions Outside Dimensions
Coil Size
Part No.
Al/PVC black 25 x 3 mm 28 x 6 mm 50 m* APBL253
Al/PVC brown 25 x 3 mm 28 x 6 mm 50 m* APBN253
Al/PVC green 25 x 3 mm 28 x 6 mm 50 m* APGN253
Al/PVC grey 25 x 3 mm 28 x 6 mm 50 m* APGY253
Al/PVC stone 25 x 3 mm 28 x 6 mm 50 m* APST253
Al/PVC white 25 x 3 mm 28 x 6 mm 50 m* APWH253
Material Dimensions Coil size Weight/m Part No.
Al 19 x 2 mm 50 m* 0.10 kg AT192
Al 25 x 3 mm 50 m* 0.21 kg AT253
Round Conductor
A Model
Bare copper round conductor.
B Model
Bare aluminium round conductor.
C Model
PVC coated copper round conductor.Weight/ m 0.49 kg.
D Model
PVC coated aluminium round conductor.Weight/ m 0.18 kg.
Material Colour Conductor Diameter
Outside Diameter
Coil Size
Part No.
Cu/PVC black 8 mm 10 mm 50 m* CSBL
Cu/PVC brown 8 mm 10 mm 50 m* CSBN
Cu/PVC grey 8 mm 10 mm 50 m* CSGY
Cu/PVC stone 8 mm 10 mm 50 m* CSST
Cu/PVC white 8 mm 10 mm 50 m* CSWH
Material Colour Conductor Diameter
Outside Diameter
Coil Size
Part No.
Al/PVC black 8 mm 10 mm 50 m* ASBL
Al/PVC brown 8 mm 10 mm 50 m* ASBN
Al/PVC grey 8 mm 10 mm 50 m* ASGY
Al/PVC stone 8 mm 10 mm 50 m* ASST
Al/PVC white 8 mm 10 mm 50 m* ASWH
Material Conductor Diameter
Coil size Weight/m
Part No.
Cu 8 mm 50 m* 0.44 kg CSC08
Material Conductor Diameter
Coil size Weight/m
Part No.
Al 8 mm 50 m* 0.12 kg CSA08
9
Conductor Holders
10
Non-metallic DC Tape Clip
Material Colour PU pc(s) Weight Part No.
PP brown 100* 0.01 kg DCBN
Material Colour PU pc(s) Weight Part No.
PP grey 100* 0.01 kg DCGY
Material Colour PU pc(s) Weight Part No.
PP black 100* 0.01 kg DCPBL
PP brown 100* 0.01 kg DCPBN
PP green 100* 0.01 kg DCPGN
PP grey 100* 0.01 kg DCPGY
PP stone 100* 0.01 kg DCPST
PP white 100* 0.01 kg DCPWH
A Model
Clip for bare 25 x 3 mm copper tape.
B Model
Clip for bare 25 x 3 mm aluminium tape.
C Model
Clip for PVC covered 25 x 3 mm tape.
* A
vaila
ble
in m
ultip
les
of 1
00.
DC Tape Clip
A Model Material Clip size Weight Part No.
Gun metal 25 x 3 mm 0.06 kg DCT253
Gun metal 31 x 6 mm (will fit 25 x 3 PVC coated tape)
0.10 kg DCT316
Adhesive base
A Model
Adhesive base.
Material Colour Weight Part No.
P grey 0.10 kg SAGY1
Slate Holdfast
A Model
For fixing flat bare or PVC covered con-ductor onto a slate or concrete tile roof.
Material Colour Weight Part No.
Al/PP black 0.05 kg SHF
Tape Clip
A Model
For use with bare 25 x 3 mm copper flat tape.
B Model
For use with PVC covered 25 x 3 mm copper tape.
Material Weight Part No.
Cu 0.02 kg TCC253
Material Weight Part No.
Cu 0.10 kg TCC316
Push-in Plastic Clip
A Model
For bare 8 mm round lightning conductors.
B Model
For PVC covered 10 mm round conductors.
Material Colour PU pc(s) Weight Part No.
PP brown 100* 0.01 kg DCBN8
PP grey 100* 0.01 kg DCGY8
Material Colour PU pc(s) Weight Part No.
PP black 100* 0.01 kg DCBL10
PP brown 100* 0.01 kg DCBN10
PP grey 100* 0.01 kg DCGY10
PP stone 100* 0.01 kg DCST10
PP white 100* 0.01 kg DCWH10 11
Clamps,Bimetal Components
Lightning Photo by Michael Bath, www.lightningphotography.com12
Flexible Copper Earth Braid Bond
A Model Material Dimensions Lug Ø Weight Part No.
Cu/gal Sn 25 x 3.5 x 200 mm 10 mm 0.09 kg FCB1
Cu/gal Sn 25 x 3.5 x 400 mm 10 mm 0.15 kg FCB2
Fixed Earthing Point
Material Hole size Weight PU pc(s) Part No.
Gun metal M10 0.40 kg 1 EP4
A Model
4-hole earthing point, no front plate.
B-Bond Clamp
Material Clamping range Weight Part No.
Gun metal for 25 mm copper tape 0.10 kg BBC
Material Clamping range Weight Part No.
Al for 25 mm aluminium tape 0.06 kg BBA
A Model
B Model
Test or junction Clamp
Material Clamping range Weight Part No.
Gun metal for 25 x 3 mm 0.29 kg OTC
Material Clamping range Weight Part No.
Al for 25 x 3 mm 0.12 kg ATC
A Model
Oblong for copper.
B Model
Oblong for aluminium.
Square Tape Clamp
Material Dimension Weight Part No.
Gun metal for 25 x 3 mm tape 0.22 kg STC253
A Model
Cast square clamp for copper tape.
Material Dimension Weight Part No.
Brass for 25 x 3 mm tape 0.22 kg STC253B
B Model
Extruded square clamp for copper tape.
Material Dimension Weight Part No.
Al for 25 x 3 mm tape 0.06 kg STA253C
C Model
Cast aluminium for aluminium tape.
Material Dimension Weight Part No.
Al for 25 x 3 mm tape 0.06 kg STA253
D Model
Extruded aluminium for aluminium tape.
Bimetal Connectors
Material Weight Part No.
StSt 0.20 kg BMC1SS
A Model
25 x 3 mm aluminium tape to 25 x 3 mm copper tape stainless steel version.
Material Weight Part No.
StSt 0.16 kg BMC2SS
B Model
8 mm aluminium to 25 x 3mm cop-per tape stainless steel version.
Material Weight Part No.
StSt 0.16 kg BMC3SS
C Model
8 mm copper to 8 mm aluminium stainless steel version.
Material Weight Part No.
Cu/Al 0.20 kg BMC1
D Model
25 x 3 mm Al to 25 x 3 copper tape.
Material Weight Part No.
Cu/Al 0.08 kg BMC2
E Model
8 mm aluminium to 25 x 3 copper tape.
Material Weight Part No.
Cu/Al 0.08 kg BMC3
F Model
8 mm copper to 8 mm aluminium.13
Equipotential Bonding
14
Earth Bars
Material Weight Dimensions Number of ways
Part No.
Cu 2.80 kg 520 x 85 x 105 mm 6 EB6
Cu 2.90 kg 520 x 85 x 105 mm 8 EB8
Cu 3.60 kg 650 x 85 x 105 mm 10 EB10
Cu 4.00 kg 755 x 85 x 105 mm 12 EB12
A Model
Earth bar without disconnecting link.
Material Weight Dimensions Number of ways
Part No.
Cu 2.90 kg 575 x 85 x 105 mm 6 EB6L1
Cu 3.20 kg 575 x 85 x 105 mm 8 EB8L1
Cu 3.90 kg 725 x 85 x 105 mm 10 EB10L1
Cu 4.40 kg 840 x 85 x 105 mm 12 EB12L1
Cu 4.80 kg 880 x 85 x 105 mm 14 EB14L1
B Model
Earth bar with single disconnecting link.
Material Weight Dimensions Number of ways
Part No.
Cu 3.40 kg 450 x 85 x 105 mm 6 EB62L
C Model
Earth bar with twin disconnecting links.
Material Weight Dimensions Part No.
Cu 0.6 kg 125 x 80 x 95 mm EBL
D Model
Disconnecting link.
Material Weight Dimensions Part No.
(DMC) Polyester 0.123 kg 35 x 33 x 25 mm INS
E Model
Insulator complete with 2 off brass studs and 3 nuts M10 threads.
Other sizes and specials available upon request.
Perforated Copper Strip
A ModelMaterial Weight Dimensions Part No.
Cu 0.12 kg 23 x 1.5 mm TC2515P
RWP Bond
A Model
Pipework bond for copper 25 mm2
(Strip sold seperately).
Material Weight Part No.
Gun metal 0.12 kg RWPC
B Model
Pipework bond for aluminium 25 mm2 (Strip sold seperately).
Material Weight Part No.
Al 0.07 kg RWPA
15
Air-termination Rods and Systems
16
16 mm Air Terminal Bases and Air Rods
Material Weight Part No.
Cu 0.48 kg ATBC
A Model
Air terminal bases for 16 mm rods and 25 x 3 mm tape.
Material Weight Part No.
Gun metal 1.08 kg RS16
B Model
Ridge saddle for 16 mm rods and 25 x 3 mm tape.
C Model
16 mm air rods.
Material Weight Dimensions Part No.
Cu 0.75 kg 500 x 16 mm CAR500
Cu 1.50 kg 1000 x 16 mm CAR1000
Cu 3.00 kg 2000 x 16 mm CAR2000
Multi-point Air Terminal
A Model
Copper multipoint air terminal with 1 m termination rod.
Material Weight Dimensions Part No.
Cu 1.90 kg 185 x 125 mm+ 1000 x 16 mm
MPT/AIRROD
Rod Brackets and Rod to Tape Coupling
A Model
Rod brackets.
Material Weight Dimensions Part No.
Gun metal 0.90 kg for 16 mm copper rods CRB
B Model
Rod to tape coupling.
Material Weight Dimensions Part No.
Gun metal 0.23 kg for 16 mm copper rods & tape
TTRC
10 mm Air Terminal Bases and Air Rods
Material Weight Dimensions Part No.
Gun metal 0.30 kg 50 x 50 x 25 mm ATBC10
A Model
Gun metal base.
Material Weight Dimensions Part No.
Al 0.15 kg 50 x 50 x 25 mm ATBA10
B Model
Aluminium base.
Material Weight Dimensions Part No.
Cu 0.60 kg 500 x 10 mm CAR500/10
Cu 1.20 kg 1000 x 10 mm CAR1000/10
C Model
Copper air rod.
Material Weight Dimensions Part No.
Al 0.20 kg 500 x 10 mm AAR500/10
Al 0.40 kg 1000 x 10 mm AAR1000/10
D Model
Aluminium air rod.
17
Surge Protection DevicesA small selection from our comprehensive range
18
DEHNventil TNDV M TN 255Part No. 951 200
DEHNventil TNSDV M TNS 255Part No. 951 400
• High performance spark-gap-based combined arrester
• Wave Breaker function
• Protects terminal equipment
DEHNventil®: Type 1 + Type 2Combined Lightning Current and Surge Arrester
Technical Data
SPD according to EN 61643-11 / IEC 61643-11 type 1 + type 2 / class I + class II
Energy coordination with terminal equipment (≤ 5 m) type 1 + type 2 + type 3
Nominal voltage (a.c.) UN 230/400 V (50/60Hz)
Max. continuous operating voltage (a.c.) UC 264 V (50/60Hz)
Lightning impulse current (10/350) Itotal 50/100 kA
Lightning impulse current (10/350)/pole Iimp 25 kA 25 kA
Voltage protection level UP ≤1.5 kV
Follow current extinguishing capability (a.c.) Ifi 50 kArms
Max. mains-side overcurrent protection 315 A gL/gG
Approvals KEMA, VDE, UL, VdS
Types
DEHNventil TNC DV M TNC 255 (*FM) 951 300(*951 305)
DEHNventil TNS DV M TNS 255 (*FM) 951 400(*951 405)
DEHNventil TT DV M TT 255 (*FM) 951 310(*951 315)
DEHNventil TN DV M TN 255 (*FM) 951 200(*951 205)
DEHNventil TT 2P DV M TT 2P 255 (*FM) 951 110(*951 115)
• Operating-current-free with visual status indication
• Modular construction with optional (FM) auxiliary contacts
* FM Contacts. 19
20
DEHNshield TNDSH TN 255Part No. 941 200
DEHNshield TNSDSH TNS 255Part No. 941 400
• Space-saving spark-gap-based combined arrester
• Wave Breaker function
DEHNshield®: Type 1 + Type 2Combined Lightning Current and Surge Arrester
Technical Data
SPD according to EN 61643-11 / IEC 61643-11 type 1 + type 2 / class I + class II
Energy coordination with terminal equipment (≤ 5 m) type 1 + type 2 + type 3
Nominal voltage (a.c.) UN 230/400 V (50/60 Hz)
Max. continuous operating voltage (a.c.) UC 255 V (50/60Hz)
Lightning impulse current (10/350) Itotal 25/50 kA
Lightning impulse current (10/350)/pole Iimp 12.5 kA
Voltage protection level UP ≤ 1.5 kV
Follow current extinguishing capability (a.c.) Ifi 25 kArms
Max. mains-side overcurrent protection 160 A gL/gG
Approvals KEMA, VDE, UL
Types
DEHNshield TNC DSH TNC 255 941 300
DEHNshield TNS DSH TNS 255 941 400
DEHNshield TT DSH TT 255 941 310
DEHNshield TN DSH TN 255 941 200
DEHNshield TT 2P DSH TT 2P 255 941 110
• Protects terminal equipment
• Operating-current-free with visual status indication
DEHNguard TNSDG M TNS 275Part No. 952 400
DEHNguard TNDG M TN 275Part No. 952 200
• High discharge capacity MOV-based surge arrester
• Protects terminal equipment
DEHNguard®: Type 2Surge Arrester
Technical Data
SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II
Nominal voltage (a.c.) UN 230/400 V (50/60 Hz)
Nominal discharge current (8/20) IN 20 kA
Voltage protection level UP ≤ 1.5 kV
Max. mains-side overcurrent protection 125 A gL/gG
Approvals KEMA, VDE, UL, VdS
Types
DEHNguard TNC DG M TNC 275 (*FM) 952 300(*952 305)
DEHNguard TNS DG M TNS 275 (*FM) 952 400(*952 405)
DEHNguard TT DG M TT 275 (*FM) 952 310(*952 315)
DEHNguard TN DG M TN 275 (*FM) 952 200(*952 205)
DEHNguard TT 2P DG M TT 2P 275 (*FM) 952 110(*952 115)
• Visual status indication
• Modular construction with optional (FM) auxiliary contacts
* FM Contacts. 21
22
DEHNcordDCOR L 2P 275 Part No. 900 430
• Compact design surge arrester
• Protects terminal equipment
DEHNcord: Type 2Surge Arrester
Types
DEHNcord 2-pole DCOR L 2P 275 900 430
DEHNcord 1-pole DCOR L 1P 275 900 431
• Visual status indication
• For use in flush mounted boxes, cable ducts, terminal equipment etc.
Technical Data
SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II
Nominal voltage (a.c.) UN 230 V (50/60 Hz)
Nominal discharge current (8/20) IN 5 kA
Voltage protection level UP ≤ 1.5 kV
Max. mains-side overcurrent protection 16 A gL/gG
DEHNrailDR M 4P 255Part No. 953 400
• High discharge capacity MOV based surge arrester
• Protects terminal equipment
• Audible status indication
• For use in flush mounted boxes, cable ducts, terminal equipment etc.
DEHNrail®: Type 3Surge Arrester
DEHNflex® M: Type 3Surge Arrester
Types
DEHNrail 2-pole DR M 2P 255 (*FM) 953 200(*953 205)
DEHNrail 4-pole DR M 4P 255 (*FM) 953 400(*953 405)
Types
DEHNflex M DFL M 255 924 396
• Visual status indication
• Modular construction with optional (FM) auxiliary contacts
* FM Contacts. 23
24
DEHNrapidDRL 10 B 180 Part No. 907 400
• A comprehensive range of lightning and surge arresters is available for all telecom / data applications
For our full range of surge protection products see our dedicated surge protection catalogue DS570/UK/0114 or visit our website www.dehn.co.uk
Protection for Telecom / Data cables
Types
DEHNrapid LSA Type 1 for LSA strips 907 400(907 401 visual indication)
DEHNpatch Type 2 for Cat 6 RJ45 929 121 / 929 100
DEHNbox Type 1 for 2 pair Telecom 922 210
• Sample applications below
Abbreviations
The following list shows and explains all abbreviations
mentioned in the present catalogue.
Abbreviation in catalogue
Conductor Types
Fl Flat conductor
Rd Round conductor
Materials
Al Aluminium
St/Cu Steel, copper-coated
Cu Copper, electrical copper
Ms Brass
Cu/gal Sn Copper, tin-coated
P Plastic material / Polyethylene / Polyamide / Polystyrene
PVC Polyvinyl chloride
PP Polypropylen
HT St High tensile steel
Recommended values
Screw Tightening torque
M5 / M6 > 4 Nm
M8 > 10 Nm
M10 > 20 Nm
M12 > 25 Nm
Material combinations among air termination sys-
tems as well as down conductors and with parts of
the construction.
Steel (tZn) Aluminium Copper Stainless Steel Titanium Tin
Steel (tZn) Yes Yes No Yes Yes Yes
Aluminium Yes Yes No Yes Yes Yes
Copper No No Yes Yes No Yes
Stainless Steel Yes Yes Yes Yes Yes Yes
Titanium Yes Yes No Yes Yes Yes
Tin Yes Yes Yes Yes Yes Yes
Provided, that no especially aggressive environmental
influences have to be considered, the material combina-
tions listed below have proved themselves. This is based
on practical experience.
25
Index
Part No. Page
AAR500/10 17
AAR1000/10 17
APBL253 9
APBN253 9
APGN253 9
APGY253 9
APST253 9
APWH253 9
ASBL 9
ASBN 9
ASGY 9
ASST 9
ASWH 9
AT192 9
AT253 9
ATBA10 17
ATBC 17
ATBC10 17
ATC 13
BBA 13
BBC 13
BMC1 13
BMC2 13
BMC3 13
BMC1SS 13
BMC2SS 13
BMC3SS 13
CAR500 17
CAR500/10 17
CAR1000 17
CAR1000/10 17
CAR2000 17
CC1 6
CC2 6
CRB 17
CSA08 9
CSBL 9
CSBN 9
CSC08 9
CSGY 9
CSST 9
CSWH 9
DBR1612 5
DBR9512C 5
DBS1612 5
DCBL10 11
DCBN 11
DCBN8 11
Part No. Page
DCBN10 11
DCGY 11
DCGY8 11
DCGY10 11
DCP16 5
DCP16H 5
DCPBL 11
DCPBN 11
DCPGN 11
DCPGY 11
DCPST 11
DCPWH 11
DCST10 11
DCT253 11
DCT316 11
DCWH10 11
DS16 5
EB6 15
EB6L1 15
EB8 15
EB8L1 15
EB10 15
EB10L1 15
EB12 15
EB12L1 15
EB14L1 15
EB62L 15
EBL 15
EP4 13
EPL663 5
EPL993 5
FCB1 13
FCB2 13
HDB256 9
HDB506 9
INS 15
MPT/AIRROD 17
OTC 13
PIT2 5
PIT3 5
PIT5 5
PIT6 5
RCC1 7
RS16 17
RTA1 7
RWPA 15
RWPC 15
Part No. Page
SAGY1 11
SCP95 7
SCT16 7
SHF 11
STA253 13
STA253C 13
STC253 13
STC253B 13
TC2515P 15
TC2530 9
TCC253 11
TCC316 11
TPBL253 9
TPBN253 9
TPGN253 9
TPGY253 9
TPST253 9
TRWH253 9
TTRC 17
UCR305/315 7
UCR320 7
UCR70 7
Surge Protection Devices
Part No. Page
900 430 22
900 431 22
907 400 24
922 210 24
924 396 23
929 121 24
941 110 20
941 200 20
941 300 20
941 310 20
941 400 20
951 110 19
951 200 19
951 300 19
951 310 19
951 400 19
952 110 21
952 200 21
952 300 21
952 310 21
952 400 21
953 200 23
953 400 23
26
For more information, please visit our website: www.dehn.co.uk
DEHN (UK) Ltd focuses on the reliable protection of buil-dings, electrical and electronic systems and human life. Our pioneering spirit and innovative ideas have been defining our company for more than 100 years and made us a global market leader for
• Surge protection• Lightning protection/Earthing• Safety equipment
Our comprehensive product range of lightning protection and surge protection devices allows optimal, practical and customer-oriented protection solutions. Our ideas, sense of feasibility, intensive research and development, modern pro-duction facilities and comprehensive customer service make us a well-known expert and market leader in our sector.
We are always there to assist you with our experi-ence. With a team of specialist technical, office and sales personnel employed to help customers make the correct choice for surge and lightning protection, DEHN (UK) Ltd are qualified to help with many different projects and queries and has been involved in a number of prestigious projects.
Please contact:DEHN (UK) LtdUnit N8b Meltham Mills Industrial EstateMeltham, HolmfirthWest YorkshireHD9 4DS Tel.: 01484 859111Fax: 01484 859222Email: [email protected]
Contact
27
DS320/UK/1214 © Copyright 2014 DEHN + SÖHNE
Tel. +44 1484 859 111Fax +44 1484 859 [email protected]
Unit N8BMelham MillsMelthamHolmfirth, HD9 4DS
DEHN (UK) LtdSurge ProtectionLightning ProtectionSafety EquipmentDEHN protects.
actiVsense, BLITZDUCTOR, BLITZPLANER, DEHN, DEHN Logo, DEHNbloc, DEHNcare, DEHNfix, DEHNgrip, DEHNguard, DEHNport, DEHNquick, DEHNrapid, DEHNshield, DEHNsnap, DEHNventil, HVI, LifeCheck, Red/Line are protected by German Trademark, by Community Trademark (EU) and/or are registered trademarks in other countries. We accept no liability for technical modifications, misprints and errors. Illustrations are not binding.
www.dehn-international.com/partners