lighting - nexcess cdn · 2019-04-04 · • outdoor lighting on decks and stairs • thousands of...

Lighting

[ 463 ]800.445.6404 | www.TaskLighting.com

illumaLED Drizzle SeriesLED Tape Light

page 524

illumaLED Radiance SeriesLED Tape Lightpage 522

illumaLED Radiance SeriesLED Tape Lightpage 522

[ 516 ]

Lighting& Power

800.445.6404 | www.TaskLighting.com

illumaLED Drizzle SeriesLED Tape Lightpage 524

illumaLED Vivid SeriesLED Puck Lightpage 536

illumaLED Radiance SeriesLED Tape Light

page 522


page 522


page 522

[ 517 ]

Lighting& Power


Designed for easy installationwithout an electrician

illumaLED lighting is designed for easy installation...without an electrician!

1. Plug the power supply into an existing electrical outlet hidden behind the microwave, refrigerator, dishwasher, or under the sink

2. Mount the receiver near the plug-in power supply

3. Run the connection wire through cabinets by drilling a tiny 3/16” hole for feed-through

4. Use our plug-in, snap, or EZ connectors to easily join the lighting products to the wire

5. In less than 30 seconds, program the wireless controller for on/off/dimming

6. Mount the wireless controller in a wall box, directly to a flat surface, or use as a fob

Use a 2-Zone or 4-Zone wireless controller and additional receivers to independently control lighting for under cabinet, above cabinet, interior cabinet, and below cabinet.

Above Cabinet

Interior Cabinet

Under Cabinet

Below Cabinet

Wireless Controller/Dimmer

Power SupplyTape Light to Tape Light

8MM-EZConnector

Tape LightTape LightConnector

ConnectionWire

WirelessController

Power Supply120V Outlet WirelessReceiver

Puck Light

Save significant cost by having your cabinet installation crew quickly install illumaLED lighting

800.445.6404 | www.TaskLighting.com[ 518 ]

Lighting& Power

Designed for easy installationwithout an electrician

Additional Task Lighting illumaLED advantages

No extra wire to bundle and hide. illumaLED uses regular wire, not jumpers, so the wire between the lights can be cut to exact length needed.

The illumaLED tape lighting has an IP65 rated Micro Waterproof Coating to protect from damage due to water, dust, cleaning, bumping, or scratching.

Learn More!View our installation videos and installation guide at TaskLighting.com to see how fast and easy it is to install illumaLED lighting without an electrician.

Add lighting in many creative ways:• Bath vanities and mirrors• Outdoor lighting on decks and stairs• Thousands of color choices with Multi-Color

RGB Tape Lighting

UL listed, with a 3 year warranty, and rated for 30,000 hours (8 hours a day for 10 years)

[ 519 ]

Lighting& Power


LED Tape Light – Vivid SeriesTape Lighting with Protective Micro Waterproof Coating – IP65 ratedHigh Light Output – 225 lumens per foot (738/M) at 3000K


Lighting& Power

See page 544

See page 546

See page 547

See page 545

See page 545

See page 545

• Under Cabinet• Interior Cabinet• Cove• Outdoor

Vivid Series Part Number Description Kelvin Temperature

L-VMW600-16-Temp 16 ft. roll 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-VMW600-32-Temp 32 ft. roll 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-VMW600-16-30 (Example part number for 3000K Vivid Series Tape Light)

• High light output – 225 Lumens per foot (738/M) at 3000K • 3 watts per foot (9.85/M), 48 watts per 16 foot roll (5M)• Kelvin temperature options: Warm White (2700K), Soft White (3000K),

Cool White (4000K), Daylight White (5000K)• 12V DC plug-in or hardwired power supply (order separately)• 36 diodes per foot – 2835 SMD LED• 16 foot or 100 foot roll of tape light – cuttable every 1"• 90 CRI (Color Rendering Index)• Dimmable (with compatible dimmer)• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)• Protective Micro Waterproof Coating – IP65 rated• 3M™ 300LSE waterproof adhesive tape• Aluminum housings available (order separately)

Applications

Features

LED Tape Lighting Part Number

NOTE: All illumaLED products require a 12V DC power supply.

See page 546

1" (25 mm)

5/16"(8 mm)

Side View - Actual Size

Top View - Actual SizeCut Line

3/8"(8.3 mm)

1/16"(1.2 mm)

Power Supplies

Wire and Connectors

Switches and Sensors

Dimming Components

Aluminum Housings with Lens

End Caps for Aluminum Housings

Mounting Clips for Aluminum Housings

Mount at front of cabinet

Installation ComponentAdhesive Promoter Part Number Description

L-APW-4298 The 3M™ Adhesive Promoter wipe preps the surface for the tape lighting to have a stronger bond.

LED Tape LightVivid Series

800.445.6404 | www.TaskLighting.com [ 521 ]

Lighting& Power

LED Tape Light – Radiance SeriesTape Lighting with Protective Micro Waterproof Coating – IP65 rated Medium Light Output – 120 lumens per foot (395/M) at 3000K


Lighting& Power


Cut Line

2" (50 mm)

5/16"(8 mm)

Top View - Actual Size

11/16"(16.7 mm)

1/16"(1.2 mm)

• Interior Cabinet• Under Cabinet• Cove• Outdoor

• Medium light output – 120 lumens per foot (395/M) at 3000K

• 2 watts per foot (4.93/M), 32 watts per 16 foot roll (5M)

• Kelvin temperature options: Warm White (2700K), Soft White (3000K), Cool White (4000K), Daylight White (5000K)

• 12V DC plug-in or hardwired power supply (order separately)

• 18 diodes per foot – 2835 SMD LED

• 16 foot or 100 foot roll of tape light – cuttable every 2"

• 90 CRI (Color Rendering Index)

• Dimmable (with compatible dimmer)

• 30,000 hour LED life at 70% lumen maintenance

• No Ultraviolet (UV) or Infrared (IR)

• Protective Micro Waterproof Coating – IP65 rated

• 3M™ 300LSE waterproof adhesive tape

• Aluminum housings available (order separately)

Mount vertically between hinges

Applications

Features



LED Tape LightRadiance Series

Radiance Series Part Number Description Kelvin Temperature

L-RMW300-16-Temp 16 ft. roll 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-RMW300-32-Temp 32 ft. roll 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-RMW300-16-30 (Example part number for 3000K Radiance Series Tape Light)


See page 544

See page 546

See page 547

See page 545

See page 545

See page 545


See page 546

Power Supplies

Wire and Connectors


Dimming Components





Lighting& Power

LED Tape Light – Drizzle SeriesTape Lighting with Protective Micro Waterproof Coating – IP65 ratedLower Light Output – 49 lumens per foot (160/M) at 3000K

[ 524 ]

Lighting& Power


LED Tape LightDrizzle Series


Top View - Actual SizeCut Line

4" (100 mm)

5/16"(8 mm)

1-5/16"(33 mm)1/8"

(2.2 mm)

• Interior Cabinet• Toe Kick• Cove• Outdoor

Drizzle Series Part Number Kelvin Temperature

L-DMW150-16-Temp 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-DMW150-16-30 (Example part number for 3000K Drizzle Series Tape Light)

• Lower light output – 49 lumens per foot (160/M) at 3000K

• 1 watt per foot (3.28/M), 16 watts per 16 foot roll (5M)



• 9 diodes per foot – 3528 SMD LED

• 16 foot roll of tape light – cuttable every 4"

• 90 CRI



• No Ultraviolet (UV) or Infrared (IR)

• Protective Micro Waterproof Coating – IP65 rated

• 3M™ 300LSE waterproof adhesive tape

• Aluminum housings available (order separately)


Applications

Features




See page 544

See page 546

See page 547

See page 545

See page 545

See page 545


See page 546

Power Supplies

Wire and Connectors


Dimming Components





Lighting& Power

Tape Lighting with Protective Micro Waterproof Coating – IP65 rated Complete package of all components needed to light the space

LED Tape Light KitsVivid Series and Radiance Series

[ 526 ]

Lighting& Power


Selecting the LED kit that's right for you

A "Zone" is a section of lighting that you want to control independently. If you want all the LED lighting in a kitchen to turn on and off together at the same time, as well as dim in the same way at the same time, then you have a 1 Zone lighting project. The wireless Quattro controller included in the kit "talks" to a receiver installed in each Zone, and each Zone can be programmed independently or all programmed the same. Using the Quattro controller, each Area in the lighting project, if desired, can be 1 Zone and have all the LED lighting turn on and off at the same time and dim at the same time. 1 Zone Example: A 2 Area lighting project would also require two receivers, because the single Zone has been divided among 2 Areas.

• If you want all the lighting to operate the same, a 1-2 Zone 2 Area kit accomplishes that with two power supplies and two receivers.

2 Zone Example: If the lighting project includes two types of lighting locations, such as under cabinet and in cabinet lighting, or under cabinet and toe kick lighting, or under cabinet and above cabinet lighting, then each lighting location can be controlled independently through zoning. The under cabinet lighting would be on 1 Zone, requiring its own receiver, and the toe kick lighting would be on another Zone, requiring its own receiver. The Quattro controller included in the kit will control both Zones.

• If the lighting project has 2 Zones and 1 Area, you need a 2 Zone 1 Area kit and a 1 Zone Expansion Pack.

• If the lighting project has 2 Zones in each Area and 2 Areas, you need a 2 Zone 2 Area kit and 2 Expansion Packs.

Selecting the number of Zones for your lighting project

In your lighting project, an "Area" is a location requiring a separate power supply. illumaLED tape lighting and puck lights are powered by a power supply that plugs into an electrical outlet. The power supply plugs into an outlet that is un-switched – there is no switch on the wall somewhere that turns that outlet on and off. Examples of typical hidden un-switched outlets would be the electrical outlet for the microwave, refrigerator, or range hood.

• If a wire for the lighting cannot be run across the entire Area to be lit due to an obstruction, such as a doorway between cabinets, a wall, or a window that would show exposed wiring, then each side of the obstruction is its own Area.

• Each side of the obstruction will need an outlet to use for power, and each side will need a power supply to plug into that outlet.

• It may be necessary to have an electrician install an electrical outlet on the wall at the back of a cabinet in order to provide an outlet for the Area if a hidden outlet for the Area is not available, such as for the refrigerator, microwave, or range hood.

Example: A kitchen with a doorway between the cabinets will be 2 Areas and will require two power supplies. This requires at least 2 Zones with a 2 Area kit.

Selecting the number of Areas for your lighting project

From your calculations above, round up the number of feet of tape lighting required to 16 ft., 32 ft., 49 ft., or 65 ft. (kit tape lighting comes in approximately 16 foot rolls).

The following two pages list the 8 Tape Light Kits. Pick the Tape Light Kit that best matches the feet of tape lighting you require, the number of Zones, and the number of Areas you require. If there is not a match, select an Expansion Pack to add a Zone or Area.

How many feet of light does your job require?


Lighting& Power

Vivid SeriesPart Number Description

1 Zone 1 Area16' Vivid Tape Light

L-VK1Z1A-16-Temp

(1) L-VMW600-16 – 16 foot roll Vivid Series LED Tape Light (cuttable every 1")(1) T-Q-4Z-WC-RF – Quattro wireless wall remote control (expandable up to 4 Zones)(1) T-Q-WR96 – Quattro receiver (96 watts maximum 12V DC)(1) T-60W-12V-PI – 60 watt 12V DC power supply(1) T-20G-CW-25 – 25 foot roll connection wire(1) L-8MM-EZ6PK – LED Tape Light to wire connectors (6 pieces)


L-VK2Z2A-16-Temp

(1) L-VMW600-16 – 16 foot roll Vivid Series LED Tape Light (cuttable every 1")(1) T-Q-4Z-WC-RF – Quattro wireless wall remote control (expandable up to 4 Zones)(2) T-Q-WR96 – Receiver (96 watts maximum 12V DC)(2) T-60W-12V-PI – 60 watt 12V DC power supply(1) T-20G-CW-50 – 50 foot roll connection wire(2) L-8MM-EZ6PK – LED Tape Light to wire connectors (12 pieces)


L-VK2Z2A-32-Temp



L-VK3Z3A-49-Temp



L-VK4Z4A-32-Temp



L-VK4Z4A-49-Temp



L-VK4Z4A-65-Temp

(4) L-VMW600-16 – 16 foot roll Vivid Series LED Tape Light (cuttable every 1")(1) T-Q-4Z-WC-RF – Quattro wireless wall remote control (expandable up to 4 Zones)(4) T-Q-WR96 – Receiver (96 watts maximum 12V DC)(2) T-60W-12V-PI – 60 Watt 12V DC power supply(2) T-96W-12V-PI – 96 Watt 12V DC power supply(1) T-20G-CW-100 – 100 foot roll connection wire(4) L-8MM-EZ6PK – LED Tape Light to wire connectors (24 pieces)

Temp indicates Kelvin Temperature. All Vivid Series Kits are available in the following Kelvin Temperatures. 2700K (27), 3000K (30), 4000K (40), 5000K (50)

L-VK2Z2A-32-30 (Example part number for 3000K Vivid Series 2 Zones, 2 Areas Tape Light Kit)

L-VK1Z1A-16

L-VK2Z2A-16

L-VK2Z2A-32

L-VK4Z4A-49

L-VK4Z4A-65

L-VK3Z3A-49

L-VK4Z4A-32

Vivid Series Kits


Lighting& Power

Expansion Packs Description

Add a Zone

L-Q-EP1Z

Do you have enough tape light but need to add a Zone to an Area of your project? This expansion pack includes connectors and a 96 watt receiver to add a Zone using your existing tape light. (1) T-Q-WR96 – Receiver (96 watts maximum 12V DC)(1) L-8MM-EZ6PK – Tape Light to wire connectors (6 pieces)

Add an Area or a Zone

L-Q-EP1Z1A

Do you have enough tape light but need to add an Area or a Zone to your project? This expansion pack includes a power supply, connectors, and 96W receiver to add a Zone or an Area using your existing tape light.

(1) T-Q-WR96 – Receiver (96 watts maximum 12V DC)(1) L-8MM-EZ6PK – Tape Light to wire connectors (6 pieces)(1) T-60W-12V-PI – 60 watt 12V DC power supply

Expansion Packs

Radiance Series Part Number Description

1 Zone 1 Area16' Radiance Tape Light

L-RK1Z1A-16-Temp

(1) L-RMW300-16 – 16 foot roll Radiance Series LED Tape Light (cuttable every 2") (1) T-Q-4Z-WC-RF – Quattro wireless wall remote control (expandable up to 4 Zones)(1) T-Q-WR96 – Receiver (96 watts maximum 12V DC)(1) T-24W-12V-PI – 24 watt 12V DC power supply(1) T-20G-CW-25 – 25 foot roll connection wire(1) L-8MM-EZ6PK – Tape Light to wire connectors (6 pieces)

Temp indicates Kelvin Temperature. The Radiance Series Kit is available in the following Kelvin Temperatures. 2700K (27), 3000K (30), 4000K (40), 5000K (50)

L-RK1Z1A-16-30 (Example part number for 3000K Radiance Series 1 Zone, 1 Area Tape Light Kit)

LED Tape Lighting Radiance Series Kits

L-Q-EP1Z1A

L-Q-EP1Z

L-RK1Z1A-16

Home Line

Voltage 120 Volts

12 volts out

120 volts in

Power SupplyLED Receiver

Class 220 gauge2 conductor wire UL Listed forin wall use

OR

20 gauge 2 conductor wire in cabinet rated

Tape Light to Tape Light

8MM-EZConnector

Splice up to 3 wire setsin each connector

Aluminum HousingsOptional fixture

12V Tape LightWith 3M™

adhesive-backed tape

Tape LightConnector

Joins wire to Tape Light

ConnectionWire

12V

QuattroController

Power SupplyConverts 120V to 12V

12V 1 Zone Control

120V OutletHidden electrical

outlet

120V PowerHouse line voltage

EXAMPLE – Basic Kit Hookup Diagram

Line VoltageWiringSupplied by other

All 120V LineVoltage installsshould be done bya qualifiedelectrician

Outlet (NotSwitched)Supplied by other

Outlet commonlyused: Microwave,Refrigerator, RangeHood, & Dishwasher

Plug-In Power Supply Wireless Dimmer

ReceiversMultiple receivers can bepaired to a singlecontroller

8MM-EZ screw-downTape Light connector

LED Tape Light 197" roll (16.4 feet)

� Vivid cut every 1"� Radiance cut every 2"

AdhesionClean surface with 3M™ Adhesive Promoter Padsbefore adheringTape Light

Aluminum Housingswith lens cover

Cut housing/lens to desired length

Tape light and connectorare hidden inside thehousing

EXAMPLE – Basic Kit Hookup Diagram

Radiance Series Kitand Expansion Packs


Lighting& Power

LED Tape Light – Rage SeriesTape Lighting with Protective Micro Waterproof Coating – IP65 ratedHigher Light Output – 466 lumens per foot (1527/M) at 3000K


Lighting& Power

• Under Cabinet• Cove• Outdoor

Rage Series Part Number Kelvin Temperature

L-RGMW300-16-Temp 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-RGMW300-16-30 (Example part number for 3000K Rage Series Tape Light)

• Higher light output – 466 Lumens per foot (1527/M) at 3000K • 8 watts per foot (26.24/M), 128 watts per 16 foot roll (5M)• Kelvin temperature options: Warm White (2700K), Soft White (3000K),

Cool White (4000K), Daylight White (5000K)• 12V DC plug-in or hardwired power supply (order separately)• 18 diodes per foot – 5730 SMD LED• 16 foot roll of tape light – cuttable every 2"• 90 CRI• Dimmable (with compatible dimmer)• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)• Protective Micro Waterproof Coating – IP65 rated• 3M™ 300LSE waterproof adhesive tape• Aluminum housings available (order separately)

Applications

Features





LED Tape LightRage Series


2" (50 mm)

3/8"(10 mm)


11/16"(16.7 mm)

1/16"(1.2 mm)

NOTE: Using L-002, L-003, or L-007 aluminum housings with Rage Tape Lighting will require soldering wire directly to tape light. Use SG9-48-HS-Color aluminum housing if using connectors.See page 545

See page 544

See page 546

See page 547

See page 545

See page 545


See page 546

Power Supplies

Wire and Connectors


Dimming Components





Lighting& Power

LED Tape Light – Side View SeriesTape Lighting with LEDs toward side of tapeMedium Light Output – 126 lumens per foot (415/M) at 4000K

[ 532 ]

Lighting& Power


LED Tape LightSide View Series


2" (50 mm)


11/16"(16.7 mm)

1/16"(1.2 mm)

5/16"(8 mm)

• Great for lighting drawers with shadow free even lighting, used with the T-PSS-60W-IR Infrared (IR) sensor proximity switch

• Panel back lighting, column edge lighting, directional lighting• Edge lighting panels, mirrors, beams

Side View Series Part Number Description

L-SV300-16-40 LED Tape Light with LEDs on the side

• Medium light output – 126 lumens per foot (415/M) at 4000K • 2 watts per foot (4.93/M), 32 watts per 16 foot roll (5M)• Kelvin temperature options: Cool White (4000K)• 12V DC plug-in or hardwired power supply (order separately)• 18 diodes per foot• 16 foot roll of tape light – cuttable every 2"• 90 CRI• Dimmable (with compatible dimmer)• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)• 3M™ 300LSE adhesive tape• Dry location only

Mount under face frame

Applications

Features


Cut Line

Installation Component

LED Tape

Puck Light

Proximity Sensor

Power Supply

OR

Example using T-PSS-60W-IR Proximity Switch

Adhesive Promoter Part Number Description


See page 544

See page 546

See page 547


See page 546

Power Supplies

Wire and Connectors


Dimming Components


Lighting& Power

LED Puck Light – Pearl SeriesPuck light with frosted, diamond, and one optic lensMedium Light Output – 205 lumens per fixture at 3000K

[ 534 ]

Lighting& Power


LED Puck LightPearl Series

Part Number Kelvin Temperature

L-PS-FR-3Color-Temp 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-PS-FR-3BK-30 (Example part number for 3000K Pearl Series LED Puck Light with Black housing)

• Medium light output – 205 lumens per fixture at 3000K

• 3 watts per fixture


• Recess or surface mount

• Includes 3 lenses: frosted, diamond, and 38° optic


• 90 CRI



• No Ultraviolet (UV) or Infrared (IR)• 3 foot lead with end barrel connector• 2-1/2" hole saw recommended for recess mount

Applications

Features

LED Puck Light Part Number

Fixture Cross-Section – Actual Size

5/8"

2-3/4"

Mounts in center of cabinet

White (WT)Black (BK)

Housing Finish Options

Brushed Aluminum (BA)

• Interior Cabinet• Perimeter Room Soffit• Architectural Niche

• Under Cabinet• Display/Accent• Over Sink

Black fixture shownL-PS-FR-3BK-30

Surface or recess mount

Bronze (BZ)

2’-0”

4’-0”

6’-0”

8’-0”1’-1”

10”

5”

1’-11”10’-0”

456 fc

114 fc

51 fc

29 fc

18 fc

2’-0”

4’-0”

6’-0”

8’-0”2’-2”

1’-7”

1’-1”

6”

2’-8”10’-0”

309 fc

77 fc

34 fc

19 fc

12 fc

2’-0”

4’-0”

6’-0”

8’-0”4’-0”

3’-0”

2’-0”

12”

5’-0”10’-0”

119 fc

30 fc

13 fc

8 fc

5 fcBeam spread chart for 38° lens

See page 544

See page 546

See page 547


See page 546

Power Supplies

Wire and Connectors


Dimming Components


Lighting& Power

LED Puck Light – Vivid Ultra Thin SeriesUltra Thin Puck LightMedium Light Output – 190 lumens per fixture at 3000K

[ 536 ]

Lighting& Power



L-UT-FR-3SN-Temp 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-UT-FR-3SN-30 (Example part number for 3000K Vivid Ultra Thin LED Puck Light with Satin Nickel housing)

• Medium light output – 190 lumens per fixture at 3000K

• 3 watts per fixture


• Surface mount only


• 90 CRI



• No Ultraviolet (UV) or Infrared (IR)• 3 foot lead with end barrel connector


1/4"

2-5/8"

Mount in center to illuminate glass shelves

Applications

Features


Finish Options

• Interior Cabinet• Perimeter Room Soffit• Niche

• Under Cabinet• Display/Accent• Over Sink

Satin Nickel (SN)

Satin Nickel fixture shownL-UT-FR-SN-30

Surface mount only

LED Puck LightVivid Ultra Thin Series

See page 544

See page 546

See page 547


See page 546

Power Supplies

Wire and Connectors


Dimming Components


Lighting& Power

LED Puck Light – Mini Round Puck SeriesNon-dimmable Mini LED Puck Light – RoundLower Light Output – 105 lumens per fixture at 3000K

[ 538 ]

Lighting& Power


Mini Round Series Part Number Kelvin Temperature

L-MR-CL-1BA-Temp 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-MR-CL-1BA-30 (Example part number for 3000K Mini LED Puck Light – Round with Brushed Aluminum housing)

• Lower light output – 105 lumens per fixture at 3000K • 1.32 watts per fixture


• Recess or surface mount• 12V DC plug-in or hardwired power supply (order separately)• 90 CRI• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)• 3 foot lead with end barrel connector• 1-3/16" hole saw recommended for recess mount


7/8"

1-3/16"

Recess into shelf to light artwork


Applications

Features


Finish Options


• Under Cabinet• Display/Accent

Brushed Aluminum fixture shownL-MR-CL-1BA-30


LED Puck LightMini Round Puck Series

See page 544

See page 546

See page 547


See page 546

Power Supplies

Wire and Connectors


Dimming Components


Lighting& Power

LED Puck Light – Mini Square Puck SeriesNon-dimmable Mini LED Puck Light – SquareLower Light Output – 105 lumens per fixture at 3000K

[ 540 ]

Lighting& Power



L-MS-CL-1BA-Temp 2700K (27), 3000K (30)4000K (40), 5000K (50)

L-MS-CL-1BA-30 (Example part number for 3000K Mini LED Puck Light – Square with Brushed Aluminum housing)

• Lower light output – 105 lumens per fixture at 3000K • 1.32 watts per fixture


• Recess or surface mount• 12V DC plug-in or hardwired power supply (order separately)• 90 CRI• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)• 3 foot lead with end barrel connector• 1-3/16" hole saw recommended for recess mount


7/8"

1-1/4"

Mount in center of cabinet


Applications

Features


Finish Options


• Under Cabinet• Display/Accent

Brushed Aluminum fixture shownL-MS-CL-1BA-30


LED Puck LightMini Square Puck Series

See page 544

See page 546

See page 547


See page 546

Power Supplies

Wire and Connectors


Dimming Components


Lighting& Power

LED Can Light – Retro Fit SeriesDimmable LED Retro Fit Can LightsHigher light output – 900 lumens per fixture at 3000K

[ 542 ]

Lighting& Power


5" (125mm)

2-1/2"(62.7mm)

4" Retro Fit Can Fixture Cross-Section

• Ceiling• Office• Stairway• Lobby

Part Number Description Kelvin Temp

L-RC4-FR9-Temp 4" Retro Fit Can Light 3000K (30), 4000K (40)

L-RC6-FR9-Temp 5 - 6" Retro Fit Can Light 3000K (30), 4000K (40)

L-RC4-FR9-30 (Example part number for 3000K 4" Retro Fit Can Light)

• Higher light output – 900 lumens per fixture at 3000K • 9 watts per fixture• Kelvin temperature options: Soft White (3000K), Cool White (4000K)• 12V DC plug-in or hardwired power supply (order separately)• 90 CRI• Dimmable (with compatible dimmer)• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)

Mount in ceiling

Applications

Features

LED Retro Fit Can Light Part Number

7" (177.8mm)

2-7/8"(73mm)

5"- 6" Retro Fit Can Fixture Cross-Section

5" - 6" Retro Fit fixture shownL-RC6-FR9-30

LED Can LightRetro Fit Series


Lighting& Power

Wire and Connectors for single color tape lightPart Number Description and Use

T-20G-CW-FT 20 gauge stranded connection wire available in 25 foot, 50 foot, 100 foot, and 500 foot rolls. FT is number of feet.

T-20GUL-CW-1K 1,000 foot box of Class 2 – 20 gauge stranded in-wall connection wire

T-20GUL-CW-1 Class 2 - 20 gauge stranded in-wall connection wire. Sold per foot. Must order a minimum of 2 feet.

T-EZWC EZ wire-to-wire connector. Must strip wire to insert into connector. Use to daisy chain fixtures in parallel runs or to connect around corners.

L-8MM-EZ100PK 8 mm EZ connector – 100 pack

L-8MM-EZ-6PK 8 mm EZ connector – 6 pack

L-8MM-SC 8 mm splice snap connector. Use to connect 8 mm LED tape light with no lead wire between the connection. Connect tape light to tape light without stripping any wire.

L-8MM-WTSC 8 mm LED tape light to wire connector.

L-10MM-SC 10 mm splice snap connector. Use to connect 10 mm LED tape light with no lead wire between the connection. Connect tape light to tape light without stripping any wire.

L-10MM-WSC 10 mm LED tape light to wire connector.

L-2PIN-SOSC-20 Solder on 2 pin strip connector. Direct push-in for solid wire, push button for stranded wire – 20 pack

T-3WSP DC 3-way splitter plug. Use to connect multiple LED light fixtures to a dimming system.

T-MBC Male barrel to conductor screw-down connector. Use to add a female barrel connector to a pair of lead wires for connection to an LED light power supply or cable.

T-FBC Female barrel to conductor screw-down connector. Use in conjunction with male barrel connector to pair lead wires or to connect and rewire an LED light power supply cable.

L-VTW-15 Vanish Wire Tape - 15 feet. NOTE: Vanish Wire does not fall under UL regulations, therefore this wire is not UL Listed.

L-VTW-30 Vanish Wire Tape - 30 feet. NOTE: Vanish Wire does not fall under UL regulations, therefore this wire is not UL Listed.

L-8MM-EZ-6PK

T-MBCT-3WSP

L-8MM-SC

T-FBC

T-EZWC

Power SupplyT-Q-WR96Quattro Receiver

Tape Light L-8MM-EZConnector

T-FBC Female Barrel Connector

L-8MM-WTSC

L-2PIN-SOSC-20

AC Power50/60Hz

Power Supply

T-Q-WR96Quattro Receiver

Puck Light

T-3WSP 3-way Splitter

illumaLED Accessories

L-10MM-SC L-10MM-WSC

L-VTW-15 L-VTW-30

Tape Light


Lighting& Power

illumaLED Accessories

5/8"(16 mm)

5/8"(16 mm)

5/16"(8 mm)

1"(25 mm)

11/16"(17.5 mm)

Part Number Description and Use

L-002-Lens-48 002 recessed aluminum housing 48" – Frosted (FR) or Clear (CL) lens. Compatible with illumaLED 8 mm and 10 mm tape lighting for sturdy, dust-proof enclosure. This product is field-cuttable. Use with L-EC-002 for end caps.

L-003-Lens-48 003 angled aluminum housing 48" – Frosted (FR) or Clear (CL) lens. Compatible with illumaLED 8 mm and 10 mm tape lighting for sturdy, dust-proof enclosure. This product is field-cuttable. Use with L-EC-003 for end caps.

L-003-Lens-80 003 angled aluminum housing 80" – Frosted (FR) or Clear (CL) lens. Compatible with illumaLED 8 mm and 10 mm tape lighting for sturdy, dust-proof enclosure. This product is field-cuttable. Use with L-EC-003 for end caps.

L-007-Lens-48 007 flat aluminum housing 48" – Frosted (FR) or Clear (CL) lens. Compatible with illumaLED 8 mm and 10 mm tape lighting for sturdy, dust-proof enclosure. This product is field-cuttable. Use with L-8MM-EZ6PK for end caps.

L-007-Lens-80 007 flat aluminum housing 80" – Frosted (FR) or Clear (CL) lens. Compatible with illumaLED 8 mm and 10 mm tape lighting for sturdy, dust-proof enclosure. This product is field-cuttable. Use with L-8MM-EZ6PK for end caps.

SG9-48-HS-ColorLinear aluminum housing 48" with frosted lens. Available in Black (B), Gray (G), or White (W). Compatible with illumaLED 8 mm and 10 mm tape lighting for sturdy, dust-proof enclosure. This product is field-cuttable. L-8MM-SC, L-8MM-WTSC, L-10MM-SC, L-10MM-WTSC, L-10MM-RGB-SC, L-10MM-RGB-WSC connectors will fit inside this housing.

L-007-FR-80 (Example part number for 80" 007 aluminum housing with Frosted lens)

Part Number DescriptionL-EC-002 End caps for L-002 aluminum housingL-EC-003 End caps for L-003 aluminum housingL-8MM-EZ6PK 8 mm connectors serve as end cap for L-007 aluminum housing

Part Number DescriptionL-MC-003 Mounting clip for L-003 aluminum housingL-MC-007 Mounting clip for L-007 aluminum housing




• Tape lighting is easy and fast to install in a housing using the attached peel-and-stick 3M™ 300LSE waterproof adhesive tape.

• Add tape lighting end caps to an aluminum housing for a finished look.

Assemble Tape Lighting into Aluminum Housings

1/4"(6.35 mm)

L-EC-003L-EC-002

L-MC-007

3M™ Adhesive Promoter WipePart Number DescriptionL-APW-4298 The 3M™ Adhesive Promoter wipe preps the surface for the tape lighting to have a stronger bond.

3/8"(10.25 mm)

5/8"(15 mm)

L-8MM-EZ6PK

L-MC-003

1/2"

1-1/4"

L-003L-002 L-007 SG9-48-HS-B


Lighting& Power

Task Lighting Accessories

Part Number Description/Output DimensionsT-12W-12V-PI 12W AC/DC 2 prong plug-in, 12V DC 1 AMP 2-15/16" x 1-3/16" x 1-13/16"T-24W-12V-PI 24W AC/DC 2 prong plug-in, 12V DC 2 AMP 3-11/16" x 1-7/8" x 1-5/16"T-36W-12V-PI 36W AC/DC 2 prong plug-in, 12V DC 3 AMP 3-3/4" x 2" x 1-5/16"T-60W-12V-PI 60W AC/DC 2 prong plug-in, 12V DC 5 AMP 5-1/8" x 2-1/16" x 1-1/4"T-96W-12V-PI 96W AC/DC 3 prong plug-in, 12V DC 10 AMP 5-1/2" x 2-3/8" x 1-3/8"T-120W-12V-PI 120W AC/DC 3 prong plug-in, 12V DC 10 AMP 6-3/8" x 2-11/16" x 1-1/4"T-320W-12V-HW 320W 12V indoor industrial hardwired 8-1/2" x 4-1/2" x 2"

Power Supplies – Constant Voltage

T-DT24W-12V-HW

T-12W-12V-PI

Part Number Description/Output DimensionsT-DT24W-12V-HW 24W 12V DC dimmable class 2 LED hardwired 13-3/4" x 3" x 1-5/8"

T-DT48W-12V-HW 48W 12V DC dimmable class 2 LED hardwired 13-3/4" x 3" x 1-5/8"

T-DT60W-12V-HW 60W 12V DC dimmable class 2 LED hardwired 13-3/4" x 3" x 1-5/8"

T-DT120W-12V-HW 120W 12V DC dimmable LED hardwired 15" x 3-1/8" x 2-1/2"

Power Supplies – Dimmable – for single color tape light

• Power supplies over 60 watts are UL Listed for commercial use, and are not UL Class 2 Listed for residential use

• Compatible with T-Q-1Z-WC-RF UNO 1-Zone Controller, T-Q-2Z-WC-RF DUO 2-Zone Controller, T-Q-4Z-WC-RF Quattro 4-Zone Controller, and T-1Z-MR-RF Mini Quattro Controller

• Compatible with RGB Inferno Series


• Compatible with 120V magnetic low voltage dimmer switch

• NOT COMPATIBLE with RGB Inferno Series

• NOT COMPATIBLE with the following dimmers, switches, or sensors: T-Q-1Z-WC-RF, T-Q-2Z-WC-RF, T-Q-4Z-WC-RF, T-1Z-MR-RF, T-PSS-60W-IR, T-DSS-30W-IR, T-TDS-60W, and T-MSS-60W

T-24W-12V-PI

T-120W-12V-PI

T-60W-12V-PIT-36W-12V-PI

T-96W-12V-PI

T-DT48W-12V-HW

T-DT60W-12V-HW T-DT120W-12V-HW

Line

Neutral

GroundGround

Line

Neutral

Red (+)

Black (-)

Red (+)

Black (-)

INPUT OUTPUT

AC Power50/60Hz

T-60W-12-WP-HW

Part Number Description/Output DimensionsT-60W-12-WP-HW 60W 12V waterproof LED hardwired 6-1/2" x 1-5/8" x 1-1/4"T-150W-12-WP-HW 150W 12V waterproof LED hardwired 7-3/8" x 2-3/8" x 1-1/2"

Power Supplies – Waterproof


• Compatible with T-Q-1Z-WC-RF UNO 1-Zone Controller, T-Q-2Z-WC-RF DUO 2-Zone Controller, T-Q-4Z-WC-RF Quattro 4-Zone Controller, and T-1Z-MR-RF Mini Quattro Controller

• Compatible with RGB Inferno Series

T-150W-12-WP-HW

Wiring for Dimmable Power Supplies

EZ Connector

Tape Light

Wall Dimmer

Dimmable Power Supply

Constant VoltagePower Supply

Quattro Receiverand Controller

Tape LightWiring for Constant Voltage

Power Supplies

EZ Connector


Lighting& Power


T-Q-WR9696W Wireless LED dimming receiver. Allows you to control different Zones independently or in a group. Use with T-Q-1Z-WC-RF UNO 1-Zone Controller, T-Q-2Z-WC-RF DUO 2-Zone Controller, T-Q-4Z-WC-RF Quattro 4-Zone Controller, or T-1Z-MR-RF Mini Quattro Remote.

T-Q-WR240240W Wireless LED dimming receiver. Allows you to control different Zones independently or in a group. Use with T-Q-1Z-WC-RF UNO 1-Zone Controller, T-Q-2Z-WC-RF DUO 2-Zone Controller, T-Q-4Z-WC-RF Quattro 4-Zone Controller, or T-1Z-MR-RF Mini Quattro Remote.

T-Q-1Z-WC-RF-Color UNO 1-Zone LED controller. Can control 1 Zone with one controller. Use with T-Q-WR96 receiver or T-Q-WR240 receiver. Available in Almond (AL), Black (BK), Brown (BR), Gray (GR), or White (WT)

T-Q-2Z-WC-RF-Color DUO 2-Zone LED controller. Can control up to 2 Zones with one controller. Use with T-Q-WR96 receiver or T-Q-WR240 receiver. Available in Almond (AL), Black (BK), Brown (BR), Gray (GR), or White (WT)

T-Q-4Z-WC-RF-Color Quattro 4-Zone LED controller. Can control up to 4 Zones with one controller. Use with T-Q-WR96 receiver or T-Q-WR240 receiver. Available in Almond (AL), Black (BK), Brown (BR), Gray (GR), or White (WT)

T-1Z-MR-RF Mini Quattro Remote controller controls 1-Zone. Use with T-Q-WR96 or T-Q-WR240.

Part Number Description and Use Dimensions

T-PSS-60W-IR Infrared (IR) sensor proximity switch. Place as close to the light source as possible while ensuring it is not exposed to light when the sensor is intended to be inactive. 2-1/4" x 3/8"

T-DSS-30W-IR Infrared (IR) door sensor switch. Place as close to the light source as possible while ensuring it is not exposed to light when the sensor is intended to be inactive. 3/8" x 1" x 1-1/4"

T-TDS-60W LED touch dimmer switch. 3/8" x 2" x 2"

T-MSS-60W Motion sensor switch. Mount sensor switch as close as possible to where movement will occur – facing out. 1/2" x 2-1/4"

Switches and Sensors for single color tape light

Dimming Components for single color tape light

T-DSS-30W-IRT-PSS-60W-IR T-TDS-60W T-MSS-60W

T-Q-4Z-WC-RF-WTT-Q-WR240 T-1Z-MR-RF


Wireless Receiverand Controller

Tape Light

OR

Puck Light

Connecting Wireless Receiver to Tape Light or Puck Light

T-Q-WR96

Power Supply

Motion Sensor

PuckLight

LEDTape

OR

Tape Light

MotionSensorPower

Supply

Tape Light

Touch Dimmer

Power Supply

Tape Light

PuckLight

DoorSensor

Power Supply

Tape Light

ProximitySensor

Power Supply

PuckLight

PuckLight

PuckLight

Task Lighting Accessories

T-Q-2Z-WC-RF-WTT-Q-1Z-WC-RF-WT


Lighting& Power

Multi-Color LED Tape Light RGB Inferno SeriesTape Lighting with Protective Micro Waterproof Coating – IP65 rated Multi-Color Light Output – 260 lumens per foot (854/M)

RGB

[ 548 ]

Lighting& Power


• Interior Cabinet• Under Cabinet• Entertainment lighting• Outdoor• Bathroom• Bar• Backlight or edge lighting for signage

Part Number Description

L-RGB-M300-16 16 ft. roll of RGB Inferno color-changing LED Tape Light with Protective Micro Waterproof Coating – IP65 rated

L-RGB-M300-16 32 ft. roll of RGB Inferno color-changing LED Tape Light with Protective Micro Waterproof Coating – IP65 rated

• Multi-color light output – 260 lumens per foot (854/M) • 4.5 watts per foot (14.4/M), 72 watts per 16 foot roll (5M)• Choose from thousands of possible colors• Use one color, multiple colors, and change colors any time• 18 diodes per foot• 16 foot or 100 foot roll of tape light – cuttable every 2"• Dimmable (with compatible dimmer)• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)• Protective Micro Waterproof Coating – IP65 rated• 3M™ 300LSE waterproof adhesive tape

Applications

Features

Multi-Color LED Tape Lighting Part Number

See page 550

See page 550

RGB Wire and Connectors

RGB Dimming Components


RGB

See page 547Switches and Sensors

See page 550RGB Amplifier


Cut Line

2" (50 mm)

3/8"(10 mm)


11/16"(16.7 mm)

1/16"(1.2 mm)

Multi-Color LED Tape LightRGB Inferno Series

NOTE: Using L-002, L-003, or L-007 aluminum housings with Rage Tape Lighting will require soldering wire directly to tape light. Use SG9-48-HS-Color aluminum housing if using connectors.See page 545

See page 545

See page 545





See page 546

Power Supplies


Lighting& Power

RGB Wire and ConnectorsPart Number Description

L-RGB-4C-WIREConnection wire for extending RGB connections between Tape Lighting, connectors, and controllers, 22 gauge double sleeve construction. Sold per foot. Must order a minimum of 2 feet.

L-10MM-RGB-SC 10 mm RGB Tape Lighting splice connector for direct connection of tape-to-tape with no lead wire between.

L-10MM-RGB-WSC 10 mm RGB Tape Lighting to 4-wire connector, for IP65 silicone-coated RGB LED. Accommodates up to 20 gauge wire

RGB Dimming ComponentsPart Number Description

T-C-RGB180 Chroma RGB Receiver. Allows you to individually control color settings and program into memory. Use with T-C-RGBWC-RF-Color.

T-C-RGBWC-RF-ColorChroma RGB wireless wall dimmer control. Allows you to program up to 4 color settings or color effects for 1 Zone. Use with T-C-RGB180. Available in Almond (AL), Black (BK), Brown (BR), Gray (GR), or White (WT)

T-C-RGBWC-RF-WTT-C-RGB180

L-RGB-4C-WIRE

RGB AmplifierPart Number Description

L-RGB-AMP-12 Mini LED RGB amplifier extends signal between rolls of RGB Tape Lighting, anode connection mode, 3-channel output. Use every 100 feet.

RGB

L-10MM-RGB-SC L-10MM-RGB-WSC

L-RGB-AMP-12

• Both a Chroma receiver and Chroma controller are required for wireless RGB dimming and color selection/settings


Chroma RGB Receiver & Controller

RGB Tape LightConnecting the RGB Amplifier to RGB Tape Light

L-10MM-RGB-WSC

Connector


Chroma RGB Receiver & Controller

RGB Tape Light

Connecting Chroma to RGB Tape Light L-10MM-RGB-WSC

Connector

L-RGB-AMP-12

RGB Amplifier


RGB Tape Light

RGB Tape Light

L-10MM-RGB-WSC

Connector

RGB InfernoSeries Accessories


Lighting& Power

[ 551 ]

Lighting& Power


LED Sheet Light – FLEX-LED SeriesFlat panel LED sheet lightHigher Light Output – 1240 lumens per fixture at 4000K

[ 552 ]

Lighting& Power


Top ViewCut Line

24" (609 mm)

9"(228 mm)

• Backlight for sign application• Illuminate opaque countertops• Architectural lighting• Wherever flexible lighting is needed

• Higher light output – 1240 lumens per fixture at 4000K • 384 diodes per 16 feet (5M)• 24V DC• Dimmable (with compatible dimmer)• 30,000 hour LED life at 70% lumen maintenance• No Ultraviolet (UV) or Infrared (IR)• This product can be cut every 1-1/2" on the 24" side and

every 4-1/2" on the 9" side

Applications

Features

Power Supplies

Wraps along curves for signage

FLEX Series Part Number Kelvin Temperature

L-FSL-15W-Temp 3400K (34), 4000K (40)5000K (50), 6500K (65)

L-FSL-15W-40 (Example part number for 4000K FLEX-LED Sheet Light)

LED Sheet Panel Part Number

Part Number Description

T-DQ75W-24V-HW 75W 24V DC RF CV Hardwired Power Supply with built-in Wireless Receiver

Dimming Components

See page 547Switches and Sensors

Cut Line

LED Sheet Light FLEX-LED Sheet


T-Q-1Z-WC-RF-Color

UNO 1-Zone LED controller. Can control 1 Zone with one controller. Use with T-Q-WR96 receiver or T-Q-WR240 receiver. Available in Almond (AL), Black (BK), Brown (BR), Gray (GR), or White (WT)

T-Q-2Z-WC-RF-Color

DUO 2-Zone LED controller. Can control up to 2 Zones with one controller. Use with T-Q-WR96 receiver or T-Q-WR240 receiver. Available in Almond (AL), Black (BK), Brown (BR), Gray (GR), or White (WT)

T-Q-4Z-WC-RF-Color

Quattro 4-Zone LED controller. Can control up to 4 Zones with one controller. Use with T-Q-WR96 receiver or T-Q-WR240 receiver. Available in Almond (AL), Black (BK), Brown (BR), Gray (GR), or White (WT)

T-1Z-MR-RF Mini Quattro Remote controller controls 1-Zone. Use with T-Q-WR96 or T-Q-WR240.


Lighting& Power

lighting - nexcess cdn · 2019-04-04 · • outdoor lighting on decks and stairs • thousands of...

Documents