lighting design guide to a beautiful home (part 1)

8/2/2019 Lighting Design Guide to a Beautiful Home (Part 1)

1/18

Lighting Design Guide

to a Beautiful HomePart One

Entrance Halls, Kitchens and Living Rooms

Authored by: Phil Gardner[December 2009 Version 003]


2/18

1

Greybluelightingdesignguideto

beautifulhomesPt1

Lighting Design Guide

to a Beautiful HomePart One

Architectural Lighting Techniques (an overview)for Entrance Halls, Kitchens and Living Rooms

Introduction

We wrote this guide to share our experience and give you easy to usetrade tips that other free guides and pages on the web about lightingdesign for our homes dont seem to offer.

Lighting design is important to a beautiful home not just because of the changing moods and

atmospheres you can create, not even because it adds real value to interior design, but as

technology is changing so very fast, to maintain high design and deliver lower energy homes we

have to work harder at understanding what we can do with light in the fabric of our buildings,

this blend of new possibilities and good design is why we start with Architectural lighting design

as a founding principle.


3/18

2

GreybluelightingdesignguidetobeautifulhomesPt1|8/1/2009

This guide concentrates on light quality and accurate positioning, important components in a

lighting design, and at the end of this document you may have some new ideas and approaches

to your lighting design, but equally you will (we hope) be a more informed purchaser of your

lighting and instructor to your electrician.

This free lighting design guide offers insights for planning 3 of the key spaces in a home,

helping you plan and envisage what the effects of your concept will look like when it is built

and installed

The Entrance,

The Living Room

The Kitchen


4/18

3


beautifulhomesPt1

The Entrance / Hallway

The entrance and hallway can be lit in any number of ways, depending on its size, features,

character and most importantly its occupants! The first impression is all important and these

spaces are little gems to light when you can have access to lift floorboards above, cut into and

through walls etc. (i.e. part of a new build or refurbishment).

All too often in homes in Britain, (large or small) the hallway is provided with a pendant light and

a power socket that is only provided by the builder/ architect thinking of a vacuum cleaner, no

other purpose.

The pendant can be a bit of a blunt instrument in a hallway, it also has more access to passing

outdoor air as we open doors and this in turn can then make them attract more dust when heat

rises, (thus consider cleaning when choosing a pendant for a hallway).

Example entrance, 1, Pendant often left at planning stage in drawing

The Downlight.....

It may be then a step forward to replace this soletry pendant with more atmospheric recessed

downlights for a clean and modern look, but this is where an increased sence of design and

proportion must be introduced,

Example entrance, 2, straight line of central downlights, actually does not enhance the space but it can be useful according to the

space or its dcor as we will explain


5/18

4


Many people want that first impression of the entrance or hallways to increase the feeling ofspace. For this wall washing techniques can be effective, if you choose recessed downlights,consider a close offset from the wall rather than one central row, which may lead you to place

two rows in a space.

Using downlights with spot type lamps normal 24 degree to 38 degree lamps in any offset lessthan 300mm from the wall will give you strong scallops (triangular shadow and light effects),these can be desirable but you should plan for the effect.

Even consider lighting only one side, for proportion according ceiling height find the space thatis 1/3rd of the ceiling width, this often works best for any architectural space. Check to find thedominant vertical surface in the space and use the light to increase its relative hierarchy.

Example entrance, 3, downlights are introduced to one wall.note the way the door opens dictates which is the visually most

important wall in the space

The same technique of enhancing the space can be achieved with wall lights as opposed to

downlights.....

Example projects combining recessed wall lights and close offset downlights making the most of small or low ceiling spaces


6/18

5


beautifulhomesPt1

If the walls are a backdrop to the interior design, i.e. they are adorned with decoration, picturesetc then by using fixed recessed downlights with moveable gimbles (directional) you can providea uniform pattern of luminaires but adjustable illumination. (It is a personal preference to use

tiltable gimbles 15 or 20mm recessed inside the luminaires,) in this way the moveablecomponent is not visible to the person in the space.

Indeed it is better to avoid glare in this way from directional luminaires. Always check ceilingdepths, and pay attention any additional distances for fire hoods and space for the heatdissipation of a lamp, your qualified electrician will advise.

Note: Here it makes sense for the recessed, directional lighting to be central to the narrow space as they then direct to adorned

walls.


7/18

6


The majority of clients describing a brief for this space will say they want warm & welcoming

and to answer such a design brief will require, subtle lights, indirect illumination and a dominant

lamp colour (for Northern European homes) of around 3,000 degrees Kelvin.

Yes we are talking technical already, but stay with us on this, it will save you hours of frustrationfor the future if you ever buy energy saving fluorescent lamps, and increasingly LEDs*1

Kelvin refers to the degree of absolute temperature, but if you simply think of a piece of hot ironin a fire it starts with a warm glow orange, then cooler white hot and eventually blue tinted whitehot, so too we refer to lamp temperature. Warmer the feel the lower the number, the colder thehigher the number.

All tungsten lamps we use in the home be that a normal GLS or a low voltage spotlight are inthe warm range 2,700 to 3,200 Kelvin.

Fluorescent lamps all tubes and energy saving compacts come in a range of colourtemperatures from 2,700 up much higher well in excess of 4,000Kelvin, making then appearmuch colder in a room. So choose carefully.

When reading the data on a fluorescent lamp or its box you may see the degree Kelvin, but

more likely the code 830, or 842 or 940 etc as three numbers in the lamp code. These last 2digits tell you the degree Kelvin, i.e. 842 would be 4,200 K.

For the warm and inviting look you should consider finding colours like 827 or 830 etc.

*1(LED Light Emitting Diode)


8/18

7


beautifulhomesPt1

If the hallway has large spaces, high ceilings and features then consider maintenance and

quantity of lights you are about to install, break down the lighting into multiple circuits, that allow

a general/ ambient perhaps low energy circuit for the space and then a more welcoming wow

factor for when it is needed.

Example entrance 4. The same principles of offset from the wall with a directional luminaire have been applied to these larger

spaces, emphasis of the space and boundary walls are emphasized

Of course many more combinations of design become available with larger spaces, note in the

example (5) below the spacing of the luminaires allow two lights to fall over the door making a

combined welcome mat of light within the feature.

Of course these are simplified examples to make a point, most halls have many more features

and intricacies.


9/18

8


In a recent project we designed a barn conversion with an entrance sloping upwards to over 4

metres, we chose to amplify the lower slopes with downlighting and the upper area with up

lighting exaggerating the two heights rather than a traditional approach.

Dont be too prescriptive in translating a lighting design from ours in concept or any others

guides and notes, after-all it is part technique and part creative design!

Note the deliberate use of two type of light, not only makes the simple but classic design, but

meet the criteria for multiple circuits. In the example above the uplights are low energy and will

be the most used circuit by the family.

Additionally at night your eye may be adapted to night vision and a lower level of light may be

more acceptable to you on first entering this space, all of which is catered for in multiple circuits.

If the architecture rises to a double or triple height space often with exposed beam and block

sub structures the careful balance of the space and vertical surfaces becomes both visually

important framing the rising space, and a platform for light...

Example embedded low energyl ight ing r is ing with the f ramed double / t r ip le he ight ent rance


10/18

9


beautifulhomesPt1

The Living Room

In the living or lounge areas of a home, the functionality of the lighting should provide scenes

which equate to the different activities that you will perform in this space.

For example, rest and relaxation the space will want to be tranquil and calming.

This will best be provided by low ambient levels of light which could be from softly dimmed walllights or table lamps.

In the living area (above all other areas), a good idea is the provision of a 5amp circuit withplugs and sockets to accommodate table or floor standing luminaires all switched or dimmedfrom a switch plate with the other light sources.

(Note of warning, if using low energy lamps in table lamps, they may not dim on a standarddimmer!)

The principle for soft and comfortable space is the same whether it is modern contemporarystyle (as above) or more traditional (as below)


11/18

10


Or combined styles with blended twin lights embedded in the ceiling on separate circuits asdesigned below, where each lamp in the twin luminaire dims independently for changing

scenes..

Most activities planned for this space will involve the occupants in a seated position. As such,

the careful consideration of any visible lamps/light sources that could cause a visual

nuisance/glare all must be taken into consideration from this seated position. For example,

somebody watching television would not appreciate a bright competing light source in their field

of vision. Plan for the seated view in your design, sit in your space when planning, as opposedto standing up when you are planning your hallway lighting!

Other activities in the living area could be to provide for an intimate evening and even lower

levels of light should be able to be achieved not forgetting the living flame from an open fire or

burning candles.


12/18

11


beautifulhomesPt1

Sometimes lighting design is knowing when to leave things out follow the principle of less is

more.


13/18

12


The Kitchen,

First and foremost the lighting design should follow the kitchen layout and types of units chosen,

built-in under cabinet lighting is almost always invaluable.

The selection of these small lights however should be guided by your lighting design not the

kitchen installer, this is only to ensure the correct balance of lamp types and colour

appearances. Kitchen suppliers will be able to offer you LEDs for the local task lighting, but

these are often cold in colour, Warm White LEDs will be available to you, but the key tip is to try

one next to your other kitchen lighting first to ensure the colour matches your other lighting.

Kitchen lighting may be done by spot lighting or diffuse light i.e. Fluorescent, providing an even

high ambient layer of light


14/18

13


beautifulhomesPt1

But always plan sufficient distribution of light to avoid shadow from behind you when you stand

by a work surface. This can be done by the position of the light or having such quantity and

reflective surfaces that light bounces around diffusing any shadow effects.

Note in the design proposal below, twin lights are positioned that one lights directly on the

worktop and one washes the vertical surface of the wall in front, (which may have wall units in

another space). High levels of quality light are achieved without strong shadow as direct and

ambient light is mixed. Of course in scene planning these lights switch and dim separately for

multiple effects.

Layers of light can be very exciting in a kitchen which may become an unexpectedly intimate

place to be late at night. Dim down the brighter working lights and forget the dirty pots!


15/18

14


Here a kitchen project with simple directional lighting positioned for effect on the high amount of

horizontal work surface.contrasting with an image of a high end kitchen but this time all floor

to ceiling units, meaning the lighting design ultimately needs to provide vertical light. It is useful

to consider the balance of this horizontal and vertical light in the kitchen design.

Finally, consider maintenance also for any feature/ decorative luminaires chosen in this space,

the heat causes hot air, water and cooking contaminants i.e. fat to float around a space. (even

with great extractors) Luminaires tend to also be warm an integral part of the flow of warm air

around your space leaving small amounts of residue on lights, so choose finishes appropriately

like metal and glass rather than fabrics.


16/18

15


beautifulhomesPt1

A Word on Lamps!

Buy lamps that are a good quality and a brand you recognize, and if you use low voltage (12V)

systems spend your money on a good transformer for the lights. I hear people say my bulbskeep blowing etc and yet in some of my own installations I know of lamps lasting over 5 years,

but used daily.

If buying low energy (compact fluorescent) lamps, buy the better electronic ballasted brands

otherwise you will experience longer warming up stages and generally light levels are not as

good as they promise on some cheaper products, (i.e. they offer an equivalent to 60 or 100 watt

etc,) which in our experience they are at least 20% less bright, (and remember to check the

colour temperature on these compact fluorescent lamps).

LEDs are taking a prominent and useful role in lighting, however some claims on lifespan and

light output are possibly misleading (note, somenot all). LEDs are definatley the future for

lighting but at the time of writing (2009) a huge difference in both price and quality exists in the

market. Please take care at all times with these products and feel free to call one of the team at

greyblue for upto date advice.

As mentioned in the first pages great lighting design is about attention to detail, good lamps are

what ultimately make your design work, so dont let your great new designs down with inferior

lamps.


17/18

16


We hope you found value in your free lighting guide? Please let us know your feedback or of

course if you simply decide to use a professional lighting service.

..Greyblue Lighting Design would be pleased to do all the design and documentation for you!

We provide unique concept designs and detailed documentation of all your spaces and

schedule of luminaires, circuits, loadings and installation instructions.

(local rate UK) 0845 900 5790 or visit www.greyblue.co.uk for more details of services.


18/18

17


beautifulhomesPt1

Author:

Phil Gardner MSc MSLL

Greyblue Lighting Design

Civrieux House

PO Box 8790

Leicester

LE3 7BG

Tel: +44 (0) 845 900 5790

[email protected]

www.greyblue.co.uk

This document remains the copyright in both content and intellectual property of greyblue lighting design ltd. No copy orpublication may occur without the express written authority of the company, which applies to image and text copy.

The content is designed for planning purposes and advice does not in any way constitute a legally binding offer, agreement or

guarantee of its performances in installation.

lighting design guide to a beautiful home (part 1)

Documents