light runner installation - fiber optikafiberoptika.com/newsletter_pdf/fiber_vision_june_2015.pdftic...
TRANSCRIPT
The amount of data traffic on optical networks is continuously increasing. In the transport core,
Key Success Factors:
To learn
To instal l
To use
To maintain
To manage
Vol. 4 Number 4 June 2015
Arti
cle
Newsletter
Philip Kassey Fiber To The Home (FTTH)
Fiber To The Home (FTTH):
Usually in an optical network the physical layer technology is fiber-optic cable. And all the optical fibers Cable trunks are
interconnected and signals are added dropped with optical add/drop multiplexers (OADMs). In addition, most of the optical
networks have been implemented with optical to electrical and electrical to optical switches, which convert optical signals to
electrical signals for processing, and then back again to optical signals.
In this “fiber to the Home or Fiber to the building" (FTTH or FTTB) could replace all the existing Hybrid Fiber Coax (HFC) and
Fiber to the Curb (FTTC) Network technologies. These are access networks in which a part of the link would be fiber, but not
the entire link from the OLT to the end-user. Only at end-user an optical to electrical (O/E) conversion takes place. In FTTC
network the terminal network segment is usually twisted copper pairs or coaxial cable so final optical receiver in a FTTC
network typically serves several customers.
But in Fiber to the Home Network to a Home or a building's link would be the optical fiber and as of now everyone needs high
speed data, dependable voice communication and high quality picture transfer and video. For this the only solution is FTTH,
because in this directly from the telephone switch to the subscriber's home is the optical fiber. Not only that it is a passive
network and there are no active components are present from the telephone switch to the end user. This reduces the network
maintenance cost and also eliminates the DC power along the link.
The main advantage with FTTH is one fiber would solve all the purpose like, Internet, HDTV, Telephone etc..
We want to Present the e-newsletter for sharing updates in the field of fiber optics and optical communication. We solicit your feedback as well as contributions towards it.
Fiber Optika Technologies Pvt Ltd.Follow us on:
LIGHTSIM- Simulation Tool
Head Office#38, 22nd Main Road,14th CrossPadmanabhanagar, Bengaluru, Karnataka -560070E mail: [email protected] site: www.fiberoptika.comPh:- +91-80- 26395002, +91-80-26395003
Mumbai Office
1st Floor, Plot No. 31, Sector 19C, Vashi, Navi Mumbai, Maharashtra 400703, India
What’
s N
ew
LIG
HT
SIM
LIGHTSIM Simulations
LIGHT RUNNER INSTALLATION
Stimulated Brillouin scattering is an effect caused by the nonlinearity of a medium, specifically related to acoustic phonons. It occurs essentially only in backward direction. It is frequently encountered when narrow-band optical signals are amplified in a fiber amplifier, or just propagated through a passive fiber.
Using our Light – SIM simulation software Stimulated Brillouin scattering can be studied & the graph can be plotted with reference to Signal gain & Pump power.
Stimulated Brillouin Scattering
Phone:+91 22-27841425
M. H. Saboo Siddik College of Engineering, Mumbai
LIGHT RUNNER- Basic has been delivered and successfully installed at ECE department of M. H. Saboo
Siddik College of Engineering, Mumbai
NITTTR Chandigarh, National Institute of Technical Teachers Training & Research (NITTTR), Chandigarh
had purchased LIGHT RUNNER Premium from Fiber Optika Technologies. The product had been successfully
delivered & installed.
@
TRAINING PROGRAM ON FIBER OPTICS
Fiber Optika has conducted 3 days Training program on Fundamentals of Fiber Optics with Hands On at TATA Communications Transformation Services, Mumbai.
@