light panels for led backlight hmi-industrial keybright lumvatech 1-2015
TRANSCRIPT
A U.S. Manufacturer of Ultra Thin Planar Light Panels for LED Backlighting
Lumvatech Private and Confidential - Do Not Distribute 2
overview
Pixels creating the illuminated image are embedded inside the light panel.
Embedding the image inside the panel ensures surface integrity.
Prototypes in as little as 2 weeks built with production quality tools.
Production in 4 weeks depending on complexity.
This process IP (intellectual property) is owned solely by Lumvatech.
Lumvatech Private and Confidential - Do Not Distribute 3
Light panels can be created from 0.005 to 0.125 inch thick polycarbonate to accommodate any stack up
Panel size can range from small (<1 inch) to large panels (>12 x 18 inches) The HMI solution can be large or small using single or multiple light panels
Side or direct fire LEDs can be used as a light source to address specific mechanical constraints
Our optical isolation techniques reduces light leakage by 85-100%
overview
Lumvatech Private and Confidential - Do Not Distribute 4
overviewKeyBright ultra thin planar light panels enable targeted consistent backlighting of tactile dome switch keypads, capacitive touch interfaces, and logo nameplates
Cap touch thru light, moves the LEDs and power away from the sensor for interference free sensing
Tactile response is maintained with flexible panels ranging from 0.005 to 0.015 inch thin Non-tactile light panels up to 0.125 inch thick
Visual feedback is achieved by turning on & off isolated, individual lit sections and indicators.
Motion and special effects can be added to any area.
Lumvatech Private and Confidential - Do Not Distribute 5
overview
The Lumvatech process offers low tooling cost. The panel can be tuned to optimize the entire backlight solution, not just the light panel.
Quick turn prototyping and computer based tooling make quick change and fine tuning possible.
Lumvatech Private and Confidential - Do Not Distribute 6
overview
Lumvatech integrates our custom light panels and your prototype boards, graphic overlay, switch panel, or logo nameplate for customer evaluation within 2 weeks.
The Lumvatech process is automated and repeatable allowing very high volume production capability. Lumvatech can produce 20 million square inches of light panels per month.
Lumvatech Private and Confidential - Do Not Distribute 7
overview
Design, engineering, and manufacturing facility is in Anderson, South Carolina
Quick and clear communication between customer, engineering and production
Lumvatech Private and Confidential - Do Not Distribute 8
summaryLight guide material suitable for medical, industrial & commercial applications
Smooth planar solution from 0.005 to 0.125 thin - Consistent, uniform, tunable custom lighting
Sub $1,000 NRE/tooling fee - 2 week prototype delivery - 4 week production lead time
Quick turn modifications during prototype phase - Internationally competitive pricing
Worldwide shipment and customer base - Measurable uniformity
20 million square inches monthly light panel production capacity
Custom solutions for tactile dome, membrane & capacitive touch switches
Lumvatech LLC 94 Northwest Drive Anderson, SC 29625