li manual english

www.laser-interceptor.com

MANUAL

Laser Interceptor - Basic and Installation

Laser Interceptor (LI) is a LASER based system made for you to keep

you and your vehicle safe in every day traffic.

LI is based on quad receiver and dual LASER transmitter technology

using military standards. The power of dual LASER transmitters are more

then hundred times greater then in look alike devices that uses LED

diode. Quad receiver ensures the best performance combined with

unique optical amplifiers used in this device.

LI is equipped with serial RS232C port for communication with standard

PC using any Windows OS. Using provided software user can set up

various options in this device.

LI CPU box is equipped with 4 ports for outer sensors, RS 232C, warning

unit and power supply connector and build in speaker for voice warnings.

On warning unit connector there are also plug for external speaker and

plug for radio mute.

Contents:

Inside of this package you will find :

This User manual

CPU Box

2 or 4 outer sensors

Warning unit with power switch

Installation accessories

For more info on Laser Interceptor features please visit our web site at:

http://www.laser-interceptor.com

1

2www.laser-interceptor.com

1. CPU BOX is hi-tech latest technology control unit containing all

needed software and hardware for problem free operation. On CPU BOX

you will find (see illustration) :

1. 1-4 Outer sensors plugs

2. PSOS port containing connections to power supply, power switch,

warning LED, mute wire, and external speaker wires.

(to enable external speaker you must change jumper position inside cpu

box, in speaker jumper settings).

3. RS 232C port for communication with PC & Special Function

connector providing special .

4. Volume trimmer for adjusting volume of voice warnings.

5. Build in speaker for voice warnings.

CPU BOX is designed for interior installation in your car. Make sure if

you are NOT using external speaker to mount it so you can hear

warnings from built in speaker.

see illustration

features

When installing be careful to not to damage the cable or crimp connector

opposite way. There are 2 or 4 extra connectors provided in mounting

accessory but use them only if you MUST. After you have finished

mounting using provided bracket make sure that sensors are parallel to

road.

3

Top view (parallel in front)

Side view (parallel to road)


Laser Interceptor, Using it...

Parking Aid:

After you have make installation turn on your device. Sound "welcome"

should be played. If there is no sound from speaker please check your

power connection.

To test parking aid on your device you can use any object that is not

black or transparent. Just pull object towards outer sensor and you

should be able to hear "beep`s" from CPU BOX or external speaker.

After 30 seconds parking aid will be automatically deactivated and you

will receive a voice warning about it.

WARNING !!!

Please check your local laws for using active laser jamming devices.

Laser Interceptor specifications:

Laser Sensor wavelength: 905nm

Laser class: 1M

Power: 12-15 V

CPU BOX current: 70mA (max 700mA)

Outer sensors: 30mA

Operational temperature: -30 to +70 C

Dimensions:

CPU BOX: 125 x 55 x 25 mm

Outer sensors (normal): 100 x 34 x 15,5 mm

Outer sensors (ultra slim): 100 x 25 x 15,5 mm

PSOS connector wires length: 1m

Sensors wires length: 5.5m

4


Warnings:

-Please take special care while installing sensors. We recommend

installation in equipped and experienced workshop. Damaging cable may

result in faulty operation. DO NOT CUT AND CRIMP new connectors if

you don't know exactly what are you doing, opposite crimped connector

may lead to permanent unit damage witch is NOT covered under

warranty.

Since this device uses IR light it can not be used as relied parking aid

since some materials absorbs or do not reflect infrared light. When using

parking aid rely on personal judgment. Black or transparent obstacles will

not be detected.

Use of Laser products can be regulated by your local laws. Please

advise should this device be used in your area or NOT.

DO NOT plug any third party equipment in to any plugs on CPU. DO

NOT try to connect outer sensors on third party devices.

When driving on longer distances periodically check for accumulated

dirt or snow on outer sensors and use cotton wipe to clean lenses on

outer sensors

Maintenance:

Basically unit is maintenance free, but you should check periodically that

lenses on outer sensors are clean, you can clean them with any water

based or alcohol means or using a simple wipe.

This device is class 1M laser product.

DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

(MAGNIFIERS) TO SENSOR HEADS WHILE ON !!

LI sensors emits an invisible laser light (905nm) that can be harmful to

sight. NEVER, under any circumstances look at the sensors while it is

connected to a power supply.

Service and support:

If you having any doubts if your device is functioning properly please e-

mail us at:

[email protected]

5


Warranty Conditions

During production and before shipping Laser Interceptor have passed

many quality and performance checks. We offer a limited 2 years

warranty to our product valid from date of first purchase. If you are not

registered user you will need to provide us with a original bill with date

and warranty card with stamp of distributor also with date on it. In case of

DOA (dead on arrival) device will be replaced and shipping costs are on

us.In case of replacement original warranty is applied to changed parts.

The warranty is NOT valid in case of physical damage to any part of unit

or on units without visible serial numbers.

Installation and reinstallation fees, shipping costs, incorrect installation,

opened units, units repaired from third party, and any kind of direct or

indirect damage caused in use misuse or mounting of Laser Interceptor

are NOT covered with any Warranty.


6


7

Outer sensors

Outer sensors (see picture above) can be mounted in horizontal or

vertical position, important is that sensors have a unobstructed "view

of road front and back (mounting behind plastic, metal, or glass objects

including grills is NOT a option).

The best way to allocate mounting position for outer sensors is

described in illustration.

Wiring diagram


8

23

1

2

3

1

INTERNAL EXTERNALEXTERNAL

1-22-3

Speaker jumper settings

To change jumper settings for external please open the cover

of CPU box and change the position of jumper as described on .

If you leave jumper open there wil be NO WARNING SOUNDS.

speaker

illustration

totally


9

Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10

li manual english

Documents