lg w1934s eng

Make sure to read the Important Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for future reference.

See the label attached on the product and give the information to your

dealer when you ask for service.

W1934SW2234S

User’s Guide

A1

This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation, use, and servicing.

On SafetyUse only the power cord supplied with the unit. In case you use another powercord, make sure that it is certified by the applicable national standards if not beingprovided by the supplier. If the power cable is faulty in any way, please contact themanufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that thesocket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications ofthis manual or listed on the display. If you are not sure what type of power supplyyou have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed powercords and broken plugs. They may result in a shock or fire hazard. Call your servicetechnician for replacement.

Do not Open the Display:There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :Do not place the display on a sloping shelf unless properly secured.Use only a stand recommended by the manufacturer.Do not drop an object on or apply impact to the product. Do not throw any toysor objects on the product screen. It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:Always turn the display OFF if you leave the room for more than a short periodof time. Never leave the display ON when leaving the house.Keep children from dropping or pushing objects into the display's cabinetopenings. Some internal parts carry hazardous voltages.Do not add accessories that have not been designed for this display.When the display is to be left unattended for an extended period of time, unplugit from the wall outlet.In the presence of thunder and lightning, never touch the power cord and signalcable because it can be very dangerous. It can cause electric shock.

On InstallationDo not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage.

Important Precautions

A2

Important Precautions

Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings are blocked, built-up heatcan cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.Place the display in a built-in enclosure unless proper ventilation is provided.Cover the openings with cloth or other material.Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may causesome afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality foryour LCD display. If used under any mode except the recommended resolution,some scaled or processed images may appear on the screen. However, this ischaracteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to thescreen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen.

On CleaningUnplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the displayscreen because over-spraying may cause electrical shock.

On RepackingDo not throw away the carton and packing materials. They make an idealcontainer in which to transport the unit. When shipping the unit to anotherlocation, repack it in its original material.

On DisposalThe fluorescent lamp used in this product contains a small amount of mercury.Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regulations ofyour local authority.

A3

Connecting the Display

ImportantThis illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot.

Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off.

Connecting the stand

1. Place the monitor with its front facing downward on a soft cloth.

2. Check the direction of the Stand Body, and connect it into the Hinge Body as shown in thepicture.

3. Check the direction of the Stand Base, and connect it into the Stand Body.

4. Once assembled take the monitor up carefully and face the front side

Stand BodyStand Base

Stand Body

Hinge Body

A4


Disassembling the stand1. Put a cushion or soft cloth on aflat

surface.2. Place the monitor face Down on

the cushion or soft cloth.

3. Hold the Head Part with one hand andhold the Stand Base Part with the otheras shown in the picture and pull theStand Base Part lightly upward

5. Please pull the stand body lightly to separate it from the hinge body.

Stand BasePart

Head Part

4. Pushing Latch inside, Take thestand base from stand body.

A5


Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off.

Positioning your display1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚~20˚

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewingposition, the forward tilt angle of the monitor should not exceed 5 degrees.

A6

Using the Computer

1. Make sure to turn off the computer and product.Connect Signal cable and Power cord in order, then tighten the screw of thesignal cable.

1

2. Press button on the front switch panel to turn thepower on. When monitor power is turned on, the 'SelfImage Setting Function' is executed automatically.

2


A

BConnect Dsub Cable (PC)Connect Dsub Cable (Mac)

NOTEThis is a simplified representation of the rear view.This rear view represents a general model; your display may differ from the view as shown.User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standardcompliance for the product.

NOTE‘ Self Image Setting Function’? This function provides the user with optimal displaysettings.When the user connects the monitor for the first time, this function automaticallyadjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurredletters, screen flicker or tilted screen while using the device or after changing screenresolution, press the AUTO/SET function button to improve resolution.

Wall-outlet type

MAC

Power Cord 12

Mac adapterFor Apple Macintosh use, a separate plug adapter is needed

to change the 15 pin high density (3 row) D-sub VGAconnector on the supplied cable to a 15 pin 2 row connector.

PC

Varies according to model.

Signal Cable

A7

Control Panel Functions

4 : 3 in WideButton

MENU Button Use this button to enter or exit the On Screen Display.

OSD LOCKED/UNLOCKEDThis function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushingthe MENU button for several seconds. The message"OSD UNLOCKED" should appear.

Front Panel Controls

56

WIDE mode 4 : 3 display mode

It allows you to adjust the size of screen you are watchingnow.

• WIDE : Switch to full screen mode according to input image signal.

• 4 : 3 : Change the image signal ratio into 4:3.

4 : 3 IN WIDE

WIDE

4 : 3 IN WIDE

4 : 3

A8

Control Panel Functions

This Indicator lights up blue when the display operatesnormally(On Mode). If the display is in Sleep Mode(Energy Saving), this indicator color changes to amber.

Use this button to turn the display on or off.Power Button

Power Indicator

Use this button to enter a selection in the On Screen Display.

AUTO/SETButton

AUTO IMAGE ADJUSTMENTWhen adjusting your display settings, always pressthe AUTO/SET button before entering the On ScreenDisplay(OSD). This will automatically adjust yourdisplay image to the ideal settings for the currentscreen resolution size (display mode).

The best display mode is

- W1934S : 1440 x 900

- W2234S : 1680 x 1050

Buttons Use these buttons to select or adjust functions in the OnScreen Display.

LightView hot key

DAYNIGHT

This feature lets you easily select the best desiredimage condition optimized to the environment(ambient illumination, image types etc).

• DAY : Bright ambient illumination• NIGHT : Dark ambient illumination• TEXT : For text images (Word processing etc.)• MOVIE : For animation images in videos

or movies • PHOTO : For pictures or drawings• NORMAL : This is under normal operating

conditions

A9

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The following section is an outline of the available adjustments and selectionsyou can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the MENU Button, then the main menu of the OSD appears.

To access a control, use the or Buttons. When the icon you wantbecomes highlighted, press the AUTO/SET Button.

Use the / Buttons to adjust the image to the desired level. Use theAUTO/SET Button to select other sub-menu items.

Push the MENU Button once to return to the main menu to select anotherfunction. Push the MENU Button twice to exit from the OSD.

NOTEAllow the display to stabilize for at least 30 minutes before making image adjustments.

A10

NOTE

The order of icons may differ depending on the model (A10~A14).

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment,and setting menus.

PICTURE

COLOR

POSITION

TRACKING

SETUP

Main menu Sub menu Reference

PRESET sRGB

6500K

9300K

RED

GREEN

BLUE

To adjust the brightness,contrast and gamma of thescreen

To adjust the position of thescreen

To customize the color of thescreen

To customize the screenstatus for a user's operatingenvironment

To improve the clarity andstability, sharpness of thescreen

BRIGHTNESS

CONTRAST

GAMMA

HORIZONTAL

VERTICAL

CLOCK

PHASE

SHARPNESS

LANGUAGE

OSD

POSITION

WHITE BALANCE

POWER INDICATOR

FACTORY RESET

HORIZONTAL

VERTICAL

: Adjustable

A11


NOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.

You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.

Press the MENU Button, then the main menu of the OSD appears.

Menu Name

Icons

Button Tip

P I C T U R E

Sub-menus

MENU : Exit: Adjust (Decrease/Increase)

SET : Enter: Select another sub-menu

A12


Main menu Sub menu Description

BRIGHTNESS

CONTRAST

GAMMA

Adjusts the brightness of the screen.

Adjusts the contrast of the screen.

Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues display high contrast images.

PICTURE

PRESET

RED

GREEN

BLUE

Selects the color temperature. • sRGB: Set the screen color to fit the

sRGB standard colorspecification.

• 6500K: Slightly reddish white.• 9300K: Slightly bluish white.

Adjusts red color levels.

Adjusts green color levels.

Adjusts blue color levels.

COLOR

MENU : Exit: Decrease: Increase

SET : Select another sub-menu



P I C T U R E

C O L O R

A13



CLOCK

PHASE

SHARPNESS

Adjusts any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange.

Adjusts the focus of the display. This item allows you to remove anyhorizontal noise and clear or sharpentext.

Adjust the clearness of the screen.

TRACKING



T R A C K I N G

HORIZONTAL

VERTICAL

Adjusts the screen image left and right.

Adjusts the screen image up and down.

POSITION



P O S I T I O N

A14



MENU : Exit: Adjust: Adjust


SETUP

S E T U P

S E T U P

If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only whenthe input signal is an analog signal.

To choose the language in which thecontrol names are displayed.

To adjust position of the OSD windowon the screen.

LANGUAGE

OSDPOSITION

WHITEBALANCE

FACTORYRESET

If the output of the video card isdifferent the required specifications, thecolor level may deteriorate due tovideo signal distortion. Using thisfunction, the signal level is adjusted tofit into the standard output level of thevideo card in order to provide theoptimal image.Activate this function when white andblack colors are present in the screen.

POWERINDICATOR

Restore all factory default settings except"LANGUAGE." Press the button to reset immediately.

Use this function to set the powerindicator on the front side of the monitorto ON or OFF.If you set OFF, it will go off. If you set ON at any time, the powerindicator will automatically be turned on.

A15

Troubleshooting

No image appears

Check the following before calling for service.

No image appears

Do you see a "OSD LOCKED" message on the screen?

� Is the power cord of thedisplay connected?

� Is the power on and thepower indicator blue orgreen?

� Is the power indicatoramber?

� Do you see an "OUT OFRANGE" message onthe screen?

� Do you see a "CHECKSIGNAL CABLE"message on thescreen?

• Check and see if the power cord is connectedproperly to the power outlet.

• Adjust the brightness and the contrast.

• If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboard tobring up the screen.

• Try to turn on the PC.

• This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.

• This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.

• You can secure the current control settings,so that they cannot be inadvertently changed.You can unlock the OSD controls at any timeby pushing the MENU button for severalseconds: the message “OSD UNLOCKED” will appear.

� Do you see “OSDLOCKED” when youpush MENU button?

A16

Troubleshooting

Display image is incorrect

� Display Position isincorrect.

� On the screenbackground, verticalbars or stripes arevisible.

� Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.

• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting. If the results are unsatisfactory, adjust the imageposition using the H position and V position iconin the on screen display.

• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease thevertical bars or stripes using the CLOCK icon inthe on screen display.

• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.

• Check Control Panel --> Display --> Settingsand adjust the display to the recommendedresolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits(true color).

ImportantCheck Control Panel --> Display --> Settings and see if the frequency or theresolution were changed. If yes, readjust the video card to the recommendresolution.

Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10. If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounterproblems such as blurred letters, blurry screen, cut-off screen display or tilted screen.

The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

A17

Troubleshooting

Have you installed the display driver?

� Have you installed thedisplay driver?

� Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message?

• Be sure to install the display driver from the displaydriver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver fromour web site: http://www.lge.com.

• Make sure to check if the video card supportsPlug&Play function.

Display image is incorrect

� The screen color ismono or abnormal.

� The screen blinks.

• Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.

• Make sure the video card is properly inserted inthe slot.

• Set the color setting higher than 24 bits (true color)at Control Panel - Settings.

• Check if the screen is set to interlace mode and ifyes, change it to the recommend resolution.

A18

Specifications W1934S

NOTEInformation in this document is subject to change without notice.

Display

Sync Input

Video Input

Resolution

Plug&Play

PowerConsumption

Dimensions& Weight

Range

Power Input

EnvironmentalConditions

Stand BasePower cord

19 inches (48 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coatingVisible diagonal size : 48 cm0.285 mm pixel pitch

Horizontal Freq. 30 - 83 kHz (Automatic)Vertical Freq. 56 - 75 Hz (Automatic)Input Form Separate Sync.

SOG (Sync On Green)

Signal Input 15 pin D-Sub Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Max VESA 1440 x 900 @ 75 HzRecommend VESA 1440 x 900 @ 60 Hz

DDC 2B

On Mode : 36W(Typ.)Sleep Mode ≤ 1 WOff Mode ≤ 1 W

With Stand Without Stand

Width 44.836 cm / 17.65 inches 44.836 cm / 17.65 inches

Height 37.575 cm / 14.79 inches 29.995 cm / 11.81 inches Depth 18.30 cm / 7.20 inches 6.00 cm / 2.36 inches

Weight(excl. packing) 3.2 kg (7.05 lbs)

Tilt -5˚~20˚

AC 100-240V~ 50/60Hz 0.8A

Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-Condensing

Storage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type or PC-outlet type

Specifications W2234S

A19

NOTEInformation in this document is subject to change without notice.

Display

Sync Input

Video Input

Resolution

Plug&Play

PowerConsumption

Dimensions& Weight

Range

Power Input

EnvironmentalConditions

Stand BasePower cord

22 inches (55.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coatingVisible diagonal size : 55.8 cm0.282 mm pixel pitch

Horizontal Freq. 30 - 83 kHz (Automatic)Vertical Freq. 56 - 75 Hz (Automatic)Input Form Separate Sync.

SOG (Sync On Green)

Signal Input 15 pin D-Sub Connector

Input Form RGB Analog (0.7 Vp-p/ 75 ohm)

Max VESA 1680 x 1050 @ 60 HzRecommend VESA 1680 x 1050 @ 60 Hz

DDC 2B

On Mode : 40W(Typ.)Sleep Mode ≤ 1 WOff Mode ≤ 1 W

With Stand Without Stand

Width 50.93 cm / 20.15 inches 50.93 cm / 20.15 inches

Height 43.13 cm / 16.98 inches 33.86 cm / 13.33 inches Depth 20.60 cm / 8.11 inches 6.05 cm / 2.38 inches

Weight(excl. packing) 4.7 kg (10.36 lbs)

Tilt -5˚~20˚

AC 100-240V~ 50/60Hz 1.0A

Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-Condensing

Storage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type or PC-outlet type

A20

Specifications

Preset Modes (Resolution)

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

123456789

1011121314

*1516

640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 6241024 x 7681024 x 7681152 x 8701152 x 9001280 x 10241280 x 10241440 x 9001440 x 9001440 x 900

31.46931.46831.46937.50037.87946.87549.72548.36360.12368.68161.80563.98179.97655.46955.93570.635

70706075607575607575656075606075

Indicator

On ModeSleep ModeOff Mode

BlueAmber

Off

LED ColorMODE

VGAVGAVGAVESAVESAVESAMACVESAVESAMACVESAVESAVESAVESAVESAVESA

*Recommend Mode

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

123456789

1011

*12

720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681152 x 8641280 x 10241280 x 10241680 x 10501680 x 1050

31.46831.46937.50037.87946.87548.36360.12367.50063.98179.97664.67465.290

706075607560757560756060

VGAVGAVGAVESAVESAVESAVESAVESAVESAVESAVESAVESA

W1934S

W2234S

A21

Installing the Wall mount plate

This monitor satisfies the specifications of the Wall mount plate orthe interchange device.

1. Put a cushion or soft cloth on aflatsurface.

2. Place the monitor face Down onthe cushion or soft cloth.

3. Hold the Head Part with one hand andhold the Stand Base Part with the otheras shown in the picture and pull theStand Base Part lightly upward

5. Please pull the stand body lightly to separate it from the hinge body.

Stand BasePart

Head Part

4. Pushing Latch inside, Take thestand base from stand body.

A22

Installing the Wall mount plate

Wall mount plate(Separate purchase)This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mountplate is purchased.

Kensington Security SlotConnected to a locking cable thatcan be purchased separately atmost computer stores.

6. Install the Wall mount plate.

Digitally yours

lg w1934s eng

Documents