Lever-Tumbler Mechanical Deadbolt Lock for Utility Closet Access Doors and Panels

Investment cast prison paracentric key (must be ordered separately)

Bolt Keepers (must be ordered separately)

Mortise With Dust Box7010KD

Mortise 7010K

Surface Applied7010SA

Application The 7010 is the industry standard lever tumbler deadbolt widely used in correctional facilities for maximum security locking of utility access panels.

The 7010 is recommended for key controlled locking of electrical and plumbing access panels, roof hatches, and miscellaneous small openings within the secure perimeter of a jail or prison.

The 7010 is not recommended for use on full size doors. Both locking and unlocking is accomplished with a proprietary RRBLS paracentric type key. The key cannot be removed from the lock unless the bolt is fully extended and deadlocked. This safety feature alerts the user to an obstruction in the bolt keeper or receiver which would jeopardize security.

National Fire

Equipment Ltd.

40 Edilcan DriveConcord Ontario, L4K 3S6

Phone: ( ) 905 761-6355

3.000"

2.437"

3.687"1.250"

4.250" 1.750"

0.500" Bolt projection

0.625" Bolt throw

0.375" Bolt projection

0.625" Bolt throw

0.750"0.906"

1.500"

1.50" Bolt

0.750" Bolt

2.225"

Paracentric Key Mechanical Deadbolt for Utility Closet Access Doors and Panels

Standard Features• Industrystandardtemplate• Investmentcaststeellockcase,zincplated• Stainlesssteeldeadbolt• Onepiecebronzeparacentriccylinder• Boltretractedprojection1/2”• Boltthrow:5/8”• Boltsize:1-1/2”x3/4”• Fourmountingscrewsincluded

Accessories (mustbeorderedseparately)• Prison key –Investmentcastbronzealloy–specifyquantityofkeysrequired

•Bolt keepers 7010K standardmortise 7010KD mortisewithdustbox 7010SA surfaceapplied

Lock Mountings (mustbeorderedseparately)Theaccesspanelmanufacturerusuallyprovidesamountingplateforthe7010lock.OtherwiseRRBLSfactorymountingsareavailableforhollowmetalandplatedoors.Theyareconstructedof7-gaugesteelandelectroplatedforcorrosionresistance.

Mountingisremovableforcleaningandrepairoflock.Escutcheonsmustbepurchasedseparately.Allmountingscrewsareincluded.Consultfactorydirectlyfortemplateoflockmountings.

•Hollow Metal Mounting (specifyHMMounting)–foruseonhollowmetaldoors.

• PlateMounting (specifyPMounting)–foruseonsteelplatedoors.Allowslocktoberimmounted.

Model & Keying

7012 Keyed one side

7016 Keyed both sides

See our "Hand of Locks

Reference Guide" for description

and symbol.

See the "Lock Mountings" section on this page

for description and symbol.

See the "Accessories"

section on this pagefor description

and symbol.

Lock Mounting AccessoriesHand of Lock

7012 – – –LHR HM Mounting (specify accessories here)

Ordering Information Model Description

7012 Keyedoneside

7016 Keyedbothsides

7010, 03-24-09

Ordering Example

Security WarningWithlever-tumblerlockskeyedontwosides(i.e.7016),itisimportantthattheenduseralwaysremovethekeyfromalockeddoor.Ifthekeyisleftinthelock,forinstanceonthenon-securesidetofacilitatefrequentunlocking,theboltcanberetractedfromtheoppositebyturningthecylinderwithacommontool.(e,g,screwdriver).Thisposesanunacceptableandpotentiallydangeroussecurityrisk!

7010

Note:Thisillustrationisforinformationonly.Donotuseforconstruction.ConsultR.R.BrinkCustomerServicePersonnelfortemplates.

National Fire

Equipment Ltd.

40 Edilcan DriveConcord Ontario, L4K 3S6

Phone: ( ) 905 761-6355