legal compliance - flp.co.za presentations/2010... · legal compliance of all hazardous locations...

Slide Slide 11

LEGAL COMPLIANCELEGAL COMPLIANCEOF OF ALLALL

HAZARDOUS LOCATIONSHAZARDOUS LOCATIONSHAZARDOUS LOCATIONSHAZARDOUS LOCATIONSIN IN TERMS OF THETERMS OF THE

OCCUPATIONAL HEALTH AND SAFETY ACTOCCUPATIONAL HEALTH AND SAFETY ACT

Presented by:Presented by: MEL WILMANSMEL WILMANS

Hazardous Locations Consultant Hazardous Locations Consultant Customers include: Eskom, Dept of Labour, Sasol, Natref, Columbus Stainless, Customers include: Eskom, Dept of Labour, Sasol, Natref, Columbus Stainless, etc. etc.

Act 85 of 1993Act 85 of 1993

O c c u p a t i o n a l H e a l t h A n d S a f e t y A c tO c c u p a t i o n a l H e a l t h A n d S a f e t y A c t

Slide Slide 22

TOPICSTOPICS•• INTRODUCTIONINTRODUCTION

•• OCCUPATIONAL HEALTH and SAFETY ActOCCUPATIONAL HEALTH and SAFETY Act. (Act 85 of 1993)

– Act (Definitions)

•• CERTIFICATE OF COMPLIANCE CERTIFICATE OF COMPLIANCE (Electrical Installation Regulation)

– Authority for issuing the C.o.C (as per SANS 10142-1 Annex P)– What is a certificate of compliance ?– Why must a C.o.C be issued ?– When must it be issued ?– What supporting documentation must submitted with certificate?– Who can issue the C.o.C ?

•• PLANT INSPECTIONPLANT INSPECTION (Electrical Machinery Regulation Section 8)

– Management actions– Plant

•• SUMMARY SUMMARY / CONCLUSION/ CONCLUSION


Slide Slide 33

I NTRODUCTI ONI NTRODUCTI ON


T H E C O M P L I A N C E O F A N T H E C O M P L I A N C E O F A N

I N S TA L L AT I O N I S T H E O W N E R ’ S I N S TA L L AT I O N I S T H E O W N E R ’ S

R E S P O N S I B I L I T Y ( E . I . R 2 0 0 9 ) . R E S P O N S I B I L I T Y ( E . I . R 2 0 0 9 ) .

T H I S T H I S AC C O U N TA B I L I T YAC C O U N TA B I L I T YC A N N OT B E H A N D E D O V E R O R C A N N OT B E H A N D E D O V E R O R

D E L I G AT E D T O S U BD E L I G AT E D T O S U B -- O R D I N AT E S O R D I N AT E S

Slide Slide 44

OCCUPATION HEALTH OCCUPATION HEALTH OCCUPATION HEALTH OCCUPATION HEALTH

AND SAFETY ACTAND SAFETY ACTAND SAFETY ACTAND SAFETY ACT

OCCUPATION HEALTH OCCUPATION HEALTH OCCUPATION HEALTH OCCUPATION HEALTH

AND SAFETY ACTAND SAFETY ACTAND SAFETY ACTAND SAFETY ACT


(Act 85 of 1993)

Slide Slide 55

T H E A C TT H E A C TDefinition:Definition:

REASONABLY PRACTICABLEREASONABLY PRACTICABLE

– implies, and refers to four criteria that the employer MUSTMUST prove that he/she acted as a reasonable person; by means of the following;

a.) carry out a - to carry out a proper risk assessment implies, and means to make use of the three-step risk management process;

> identify all risks> evaluate all risks, and> control or terminate the risk;

b.) provide workers with safe working procedures;

c.) provide workers with personal protective equipment;

d.) with the help of a cost analysis decide whether it is safe and cost effective to either remove or mitigate the hazard(s) / RISK.hazard(s) / RISK.

RISK ASSESSMENTRISK ASSESSMENT


Slide Slide 66

SectionSection 37 of the ACT37 of the ACT

I f a n e m p l o y e e c o m m i t s a n o f f e n s e I f a n e m p l o y e e c o m m i t s a n o f f e n s e t h e n t h et h e n t h e e m p l o y e re m p l o y e r

m u s t m u s t p r o v ep r o v e t h a tt h a t h eh e m e t t h e c r i t e r i a .m e t t h e c r i t e r i a .

I f h e c a n ’ t i t i s p r e s u m e d t h a tI f h e c a n ’ t i t i s p r e s u m e d t h a t h eh ec o m m i t t e d t h e c o m m i t t e d t h e o f f e n s eo f f e n s e

But when proven it means:But when proven it means:

• the act was committed without connivance or permission

• the act was not within the scope of authority (work),

• all reasonable preventative steps were taken.(training PPE supplied)


Slide Slide 77

Proof Proof -- Section 39 of the Section 39 of the ACTACT

MUST BE ABLE TOMUST BE ABLE TO

PROVE ALL,PROVE ALL,

AND HAVE RECORDS AND HAVE RECORDS


Slide Slide 88

ELECTRICALELECTRICALELECTRICALELECTRICALINSTALLATIONINSTALLATIONINSTALLATIONINSTALLATION

REGULATIONREGULATIONREGULATIONREGULATION

ELECTRICALELECTRICALELECTRICALELECTRICALINSTALLATIONINSTALLATIONINSTALLATIONINSTALLATION

REGULATIONREGULATIONREGULATIONREGULATIONWiring of Wiring of premises (2009)premises (2009)


Slide Slide 99

ELECTRICAL INSTALLATION REGULATIONELECTRICAL INSTALLATION REGULATION


1.)1.) DefinitionsDefinitions

22.).) Responsibilities Responsibilities Section 4Section 4

33.).) Certificate of ComplianceCertificate of Compliance Section Section 99

>> What What is is a a C.o.C ? C.o.C ?

oof 2009f 2009

>> Why Why issue issue a C.o.C ? a C.o.C ?

>> Who may issue a C.o.C ? Who may issue a C.o.C ?

>> What must accompany the C.o.C ? What must accompany the C.o.C ?

>> When can a C.o.C be issued ? When can a C.o.C be issued ?

>> What test is required to issue a C.o.C ? What test is required to issue a C.o.C ?

Slide Slide 1010

“point of consumption”

1 . )1 . ) DD E F I N I T I O N SE F I N I T I O N S


“point of control”

“point of outlet”

“point of supply”

Slide Slide 1111 O c c u p a t i o n a l H e a l t h A n d S a f e t y A c tO c c u p a t i o n a l H e a l t h A n d S a f e t y A c t

22.). ) RESPONSIBILITYRESPONSIBILITY

(1) The user or the lessor o f the e lectr ica l insta l lat ion, as the case may be, sha l l be responsib le for the safety,

safe use and maintenance of the e lectr ica l insta l lat ion he or she uses or

leases and, except for work as permitted in regulat ion 11 (3) , sha l l not tamper

with or a l low any tamper ing on any insta l lat ion whether or not a cert i f icate

o f compl iance has been issued


RESPONSIBILITY FOR ELECTRICAL INSTALLATIONSRESPONSIBILITY FOR ELECTRICAL INSTALLATIONSRESPONSIBILITY FOR ELECTRICAL INSTALLATIONSRESPONSIBILITY FOR ELECTRICAL INSTALLATIONS


22.). ) RESPONSIBILITYRESPONSIBILITY

Slide Slide 1414

Cable gland Ex e, but Cable gland Ex e, but motor Ex d ???motor Ex d ???

Name plate Name plate missingmissing

Open entry holeOpen entry hole

Dent on cooling fan Dent on cooling fan restrict air flowrestrict air flow

GENERAL GENERAL CONDITIONCONDITION UNSAFE UNSAFE

FOR USEFOR USE

Manufacturer ID plate (no Manufacturer ID plate (no information)information)

FLAMEPATH ?FLAMEPATH ?

RustRust

Cover bolt missingCover bolt missing

IT SEEMS, NO PROPER CLEANING IT SEEMS, NO PROPER CLEANING WERE EVER DONE ON UNITWERE EVER DONE ON UNIT

UNIT INSTALLED IN A UNIT INSTALLED IN A ZONE 21 LOCATIONZONE 21 LOCATION


33.). ) CERTIFICATE OF COMPLIANCECERTIFICATE OF COMPLIANCE

( 1 . ) S u b j e c t t o t h e p r o v i s i o n s o f s u b -r e g u l a t i o n ( 3 ) e v e r y u s e r o r l e s s o r o f a n e l e c t r i c a l i n s t a l l a t i o n , a s t h e c a s e m a y b e , s h a l l h a v e a n o r i g i n a l o r i g i n a l

v a l i d c e r t i f i c a t ev a l i d c e r t i f i c a t e o f c o m p l i a n c e i n t h e f o r m o f a n n e x u r e 4 , w h i c h s h a l l b e a c c o m p a n i e d b y a t e s t r e p o r tt e s t r e p o r t i n

t h e f o r m a t a p p r o v e d b y t h e c h i e f i n s p e c t o r , i n r e s p e c t o f e v e r y s u c h

e l e c t r i c a l i n s t a l l a t i o n :



SANS 10142SANS 10142--1 Annex P1 Annex P

../0142/Request for coc rev I.ppt



I t ’ s a d e c l a r a t i o n o f s a f e t y i s s u e d b y a c o m p e t e n t p e r s o n i n t e r m s o f

t h e i n s t a l l a t i o n h e / s h e i s r e s p o n s i b l e a f t e r e l e c t r i c a li n s t a l l a t i o n w o r k w a s d o n e .



> It’s a legal requirement

> Ensure compliance of the electrical installation

> Peace of mind for management to maintain safety integrity

> Electrical Supplier may request it

> Basic principle for a safe electrical environment

> Chief Inspector of Machineries prescribed format of proof



> E a r t h i n g a n d b o n d i n g ( T e s t 1 & 2 )

> E a r t h f a u l t l o o p i m p e d a n c e ( T e s t 4 )

> I n s u l a t i o n R e s i s t a n c e (Test 7)

> Voltages (no load, fu l l load, furthest connect ion) (Test 8 ,9 ,10)

> Voltage Neutra l to Earth (Test 5)



> The test report (as required by the E.I.R)

> The calibration certificates of all used test equipment

> Additional test report for a hazardous location

> The attached Hazloc classification report & approval

> All installed equipment’s certification & IA certification

> Detail scope of project or upgrade

> All supporting documentation (drawings, schematics)



O N LYO N LY a c o m p e t e n t p e r s o n r e g i s t e r e d a s a M . I . E a n d

a p p o i n t e d b y t h e C h i e f I n s p e c t o r o f M a c h i n e r y



> When the M.I.E is satisfied and confirmed that all defects have been cleared, and accepted by the owner

> When all documentation have been obtained

> All test results within required values

> The installation adhered to the requirements of the required codes of practice

> All install loops have been approved and verified

Slide Slide 2323

IN SHORT:IN SHORT:

E a c h u s e r o f a n e l e c t r i c a l i n s t a l l a t i o n i s R E S P O N S I B L ER E S P O N S I B L E f o r t h e

s a f e u s e a n d m a i n t e n a n c e , o f t h e i n s t a l l a t i o n u n d e r h i s / h e r c o n t r o l , a n d W I L LW I L L h a v e a V A L I DV A L I D c e r t i f i c a t e

o f c o m p l i a n c e f o r e v e r y s u c h i n s t a l l a t i o n .


RESPONSIBILITY FOR ELECTRICAL INSTALLATIONSRESPONSIBILITY FOR ELECTRICAL INSTALLATIONSRESPONSIBILITY FOR ELECTRICAL INSTALLATIONSRESPONSIBILITY FOR ELECTRICAL INSTALLATIONS

Slide Slide 2424

ELECTRICALELECTRICALELECTRICALELECTRICALMACHINERYMACHINERYMACHINERYMACHINERY

REGULATIONREGULATIONREGULATIONREGULATION

ELECTRICALELECTRICALELECTRICALELECTRICALMACHINERYMACHINERYMACHINERYMACHINERY

REGULATIONREGULATIONREGULATIONREGULATIONS E C T I O N 8 S E C T I O N 8 - -- - E l e c t r i c a l E l e c t r i c a l M a c h i n e r y i n H a z a r d o u s L o c a t i o n sM a c h i n e r y i n H a z a r d o u s L o c a t i o n s


A S P E RA S P E R

Slide Slide 2525

ELECTRICAL MACHINERY REGULATIONELECTRICAL MACHINERY REGULATION

Regulation 8.2 Regulation 8.2 -- LabelingLabeling– C e r t i f i c a t i o n o f e q u i p m e n t– P e r m a n e n t L a b e l i n g p l a n t c o d e s

Regulation Regulation 8.7 8.7 -- Inspection periodInspection period– N o t e x c e e d i n g 2 4 m o n t h s o r l e s s , a s r e q u i r e d

RRegulation egulation 8.8 8.8 -- RecordsRecords– Te s t c e r t i f i c a t e s , s c o p e o f w o r k , a r e a

c l a s s i f i c a t i o n , u p d a t e d p l a n t l a y - o u t d r a w i n g s , a l l c e r t i f i e d e q u i p m e n t l i s t e d i n r e c o r d b o o k a n d t h e C e r t i f i c a t e o f c o m p l i a n c e f o r t h e i n s t a l l a t i o n


Slide Slide 2626

APPLICABLE CODES OF PRACTICEAPPLICABLE CODES OF PRACTICE

S A N S 1 0 1 0 8 o f 2 0 0 2 ( E d 4 . 1 )S A N S 1 0 1 0 8 o f 2 0 0 2 ( E d 4 . 1 )>> T h e c l a s s i f i c a t i o n o f H a z a r d o u s L o c a t i o n s T h e c l a s s i f i c a t i o n o f H a z a r d o u s L o c a t i o n s

S A N S 6 0 0 7 9 S A N S 6 0 0 7 9 –– 1 0 o f 2 0 0 51 0 o f 2 0 0 5>> E l e c t r i c a l E l e c t r i c a l e q u i p m e n t e q u i p m e n t f o r e x p l o s i v e g a s a t m o s p h e r e sf o r e x p l o s i v e g a s a t m o s p h e r e s

S A N S 1 0 8 6 S A N S 1 0 8 6 –– I o f 2 0 0 3I o f 2 0 0 3>> T h e i n s t a l l a t i o n i n s p e c t i o n a n d m a i n t e n a n c e o f T h e i n s t a l l a t i o n i n s p e c t i o n a n d m a i n t e n a n c e o f

e q u i p m e n t u s e d e q u i p m e n t u s e d i n e x p l o s i v e a t m o s p h e r e si n e x p l o s i v e a t m o s p h e r e s

S A N S 1 0 1 4 2 S A N S 1 0 1 4 2 –– 1 o f 2 0 0 31 o f 2 0 0 3>> T h e w i r i n g o f p r e m i s e sT h e w i r i n g o f p r e m i s e s


Slide Slide 2727

SANS 1086 SANS 1086 –– I of 2003I of 2003

SECTION 1SECTION 1 SCOPESCOPE: :

T h e s t a n d a r d c o v e r s t h e i n s t a l l a t i o n , i n s p e c t i o n a n d m a i n t e n a n c e o f e l e c t r i c a l a n d m e c h a n i c a l e q u i p m e n t t o b e u s e d i n

a p p l i c a t i o n s i n c l u d i n g s u r f a c e i n s t a l l a t i o n s o n m i n e s , i n a t m o s p h e r e s t h a t m i g h t b e e x p l o s i v e b e c a u s e o f t h e

p r e s e n c e o f g a s e s , v a p o u r s , m i s t , d u s t s o r f i b r e s t h a t a r e f l a m m a b l e i n t h e p r e s e n c e

o f a t m o s p h e r i c o x y g e n .


Slide Slide 2828

SANS 1086 SANS 1086 –– I of 2003I of 2003

SECTION 12SECTION 12 INSPECTION & MAINTENANCE INSPECTION & MAINTENANCE OF ELECTRICAL INSTALLATIONS IN OF ELECTRICAL INSTALLATIONS IN

HAZARDOUS LOCATIONS HAZARDOUS LOCATIONS : :

S e c t i o n 1 2 . 1 . 1 D O C U M E N TAT I O N

S e c t i o n 1 2 . 1 . 2 Q U A L I F I C AT I O N O F P E R S O N N E L

S e c t i o n 1 2 . 1 . 3 I N S P E C T I O N S

S e c t i o n 1 2 . 1 . 1 0 G E N E R A L G U I D A N C E N O T E S T O T H E I N S P E C T I O N S C H E D U L E S


Slide Slide 2929

SANS 1086 SANS 1086 –– I of 2003I of 2003

SECTION 12.1.1 SECTION 12.1.1 DOCUMENTATIONDOCUMENTATION: :


Up to date details of the following items shall be available:

a.) the classification of hazardous areas (see SANS 10108); (REPORT, DRAWING)

b.) the equipment group and temperature class;

c.) sufficient records to enable explosion-protected equipment to be maintained in accordance with its type of protection (for example, list and location of equipment, spares, technical information); and

d.) the route of underground cables.

Slide Slide 3030

SANS 1086 SANS 1086 –– I of 2003I of 2003

SECTION 12.1.2SECTION 12.1.2 QULIFICATION OF PERSONNELQULIFICATION OF PERSONNEL: :


T h e i n s p e c t i o n a n d m a i n t e n a n c e o f i n s t a l l a t i o n s s h a l l b e c a r r i e d o u t o n l y b y c o m p e t e n t p e r s o n n e l w h o s e t r a i n i n g h a s

i n c l u d e d i n s t r u c t i o n o n t h e v a r i o u s t y p e s o f p r o t e c t i o n a n d i n s t a l l a t i o n p r a c t i c e , r e l e v a n t r u l e s a n d r e g u l a t i o n s a n d t h e

g e n e r a l p r i n c i p l e s o f a r e a c l a s s i f i c a t i o n .

A p p r o p r i a t e r e f r e s h e r t r a i n i n g s h a l l b e g i v e n t o s u c h p e r s o n n e l o n a r e g u l a r

b a s i s .

Slide Slide 3131

SANS 1086 SANS 1086 –– I of 2003I of 2003

SECTION 12.1.3SECTION 12.1.3 INSPECTIONSINSPECTIONS: :


B e f o r e p l a n t o r e q u i p m e n t i n a h a z a r d o u s a r e a i s b r o u g h t i n t o s e r v i c e , i t s h a l l b e g i v e n a n i n i t i a l i n s p e c t i o n a n d s h a l l s u b s e q u e n t l y b e r e - i n s p e c t e d p e r i o d i c a l l y t o e n s u r e t h a t t h e i n s t a l l a t i o n i s m a i n t a i n e d i n a c o n d i t i o n t h a t i s s a t i s f a c t o r y f o r c o n t i n u e d u s e

12.1.3.2 Types of inspection

12.1.3.3 Grades of inspection

Initial, Periodic, Sample and Special Initial, Periodic, Sample and Special

Visual, Close & DetailedVisual, Close & Detailed

Slide Slide 3232

SANS 1086 SANS 1086 –– I of 2003I of 2003

SECTION 12.1.10SECTION 12.1.10 GENERAL GUIDANCE NOTES TO THE GENERAL GUIDANCE NOTES TO THE INSPECTION SCHEDULES:INSPECTION SCHEDULES:

a.) Apparatus is appropriate to area classification: .

b.) Apparatus group is correct: .

c.) Apparatus maximum surface temperature is correct:

d.) Apparatus circuit identification

e.) Cable entry devices.

f.) Type of cable is appropriate

g.) Sealing (trunking, ducts, pipes or conduits)

h.) Overcurrent (protection):

i.) Warning devices and signs


Slide Slide 3333

IDENTIFICATION OF EQUIPMENT SUMMARIZEDIDENTIFICATION OF EQUIPMENT SUMMARIZED


GasGas/Dust/DustEquipmentEquipment CategoryCategory

EquipmentEquipment GroupGroupSpecificSpecific markingmarking of explosion protectionof explosion protection

NotifiedNotified body I/Dbody I/DCE markingCE marking

05180518 II 2 G DII 2 G D

EExEEx dedebb II C T4II C T4

EPL

Explosion protected equipment (Europe)Explosion protected equipment (Europe)

Type of ProtectionType of Protection

GroupGroup

Equipment group A, B or C Equipment group A, B or C

Temperature ClassTemperature Class

Slide Slide 3434

INSPECTION DETAIL SUMMARIZEDINSPECTION DETAIL SUMMARIZED


NEW NEW PLANTPLANT

Type: INITIALType: INITIAL

Grade: DETAILEDGrade: DETAILED

ACTIONACTION

Determine provisional Determine provisional periodic intervalperiodic interval

DECISIONDECISION

Type: SAMPLEType: SAMPLE

Grade: VISUALGrade: VISUAL Confirm periodic Confirm periodic interval and conductinterval and conduct

Can an increase in the Can an increase in the periodic inspection periodic inspection

interval be justified?interval be justified?

NONO

Type: PERIODIC Type: PERIODIC Grade: CLOSE Grade: CLOSE

--------------------------------Type: SAMPLE Type: SAMPLE


EXISTING PLANTEXISTING PLANT

Has the periodic interval Has the periodic interval already been two years?already been two years?

YESYES

Increase Increase

PERIODIC PERIODIC

intervalintervalType: PERIODIC Type: PERIODIC Grade: CLOSE(I.C) Grade: CLOSE(I.C)

VISUAL(not I.C) VISUAL(not I.C) --------------------------------------------




Grade: VISUALGrade: VISUAL

NONO

Can an increase in the Can an increase in the periodic inspection periodic inspection

interval be justified?interval be justified?

Carry out safety audit to Carry out safety audit to recommend new periodic recommend new periodic

intervalintervalNONO

YESYES

YESYES

Slide Slide 3535

RESPONSIBILITIESRESPONSIBILITIESRESPONSIBILITIESRESPONSIBILITIESRESPONSIBILITIESRESPONSIBILITIESRESPONSIBILITIESRESPONSIBILITIESOF ALL PERSONS INVOLVED IN HAZLOC PROCESSOF ALL PERSONS INVOLVED IN HAZLOC PROCESS


Slide Slide 3636

RESPONSIBILITIESRESPONSIBILITIES

•• MANAGEMENT ( AND/OR GMR 2.1MANAGEMENT ( AND/OR GMR 2.1 ))

•• SYSTEM SYSTEM ENGINEER (RESPONSIBLE PERSONENGINEER (RESPONSIBLE PERSON ))

•• ACCREDITED PERSON(S) ACCREDITED PERSON(S) M.I .E ’SM.I .E ’S

•• ENGINEERING, MAINTENANCE AND ENGINEERING, MAINTENANCE AND OPERATING OPERATING STAFFSTAFF


Slide Slide 3737

Management ( and/or GMR 2.1Management ( and/or GMR 2.1 ))

– E n f o r c e m e n t a n d m a i n t a i n i n g o f a l l l e g a l r e q u i r e m e n t s

– A r e a c l a s s i f i c a t i o n A p p r o v a l

– P e r s o n n e l ( Tr a i n i n g , A p p o i n t m e n t s )

– B u d g e t



Slide Slide 3838

System System Engineer Engineer (Responsible Person)(Responsible Person)

– A l l P l a n t s ( f u l l y c o m p l i a n t )

– D o c u m e n t a t i o n a n d C e r t i f i c a t e o f c o m p l i a n c e ( p e r a r e a )

– A l l m o d i f i c a t i o n s w e l l c o n t r o l l e d

– I n s p e c t i o n a n d m a i n t e n a n c e s c h e d u l e s i n p l a c e

– R e g u l a r f e e d b a c k t o m a n a g e m e n t

– D e v e l o p m e n t a n d i m p l e m e n t a t i o n o f p r o c e d u r e s a n d s t a n d a r d s



Slide Slide 3939

Accredited Accredited person(s) M.I.E’sperson(s) M.I.E’s

– Te s t a n d i s s u i n g o f C . o . C ’s

– A s s i s t w i t h a r e a c l a s s i f i c a t i o n s

– I n s p e c t i o n s ( a l l t y p e s )

– I n v o l v e d i n p l a n t m a i n t e n a n c e

– S u p e r v i s e / C o n t r o l e l e c t r i c a l m o d i f i c a t i o n s



Slide Slide 4040

EngineeringEngineering, Maintenance and , Maintenance and Operating staffOperating staff

– D e s i g n a p p r o v e d m o d i f i c a t i o n s

– P r e s e r v a t i o n o f d o c u m e n t a t i o n a n d c e r t i f i c a t i o n s

– M a i n t a i n s t a n d a r d s & r e q u i r e m e n t s

– E l e c t r o n i c c a p t u r e o f l e g a l d o c u m e n t a t i o n

– O p e r a t e p l a n t a s p e r O E M r e q u i r e m e n t s




COMPANIES STAFF COMPANIES STAFF SHORT COMMINGS I.T.O THE SHORT COMMINGS I.T.O THE

NEW E.I.R of 2009NEW E.I.R of 2009

FACTS !FACTS !FACTS !FACTS !


STAFF STAFF SHORT COMMINGS I.T.O THE NEW E.I.R of SHORT COMMINGS I.T.O THE NEW E.I.R of

20092009

Do not understand information required on a VALID C.o.C

Have never witnessed the required test conducted by a contractor, to validate the results !

Has never seen a new certificate of compliance

Has not read or understand the new EIR or the SANS 10142-1 Code

Doesn’t know their responsibility i.t.o the new regulation (especially in the electrical field)

Has never done any form of training in this field (practical application)

MUST appoint an A.I.A, or Competent Person on all installation above 25 kVA

Slide Slide 4343

SUMMARYSUMMARYSUMMARYSUMMARYSUMMARYSUMMARYSUMMARYSUMMARY

Slide Slide 4444

CONCLUSION

• Understand the legal requirements and adhere to it, as soon as possible. (Ensure all required systems in place)

• Compile all proof of compliance (meetings, plant walk downs, inspections, etc.)

• Train, appoint and equip competent staff

• Ensure full compliance by having valid C.o.C’s for all points of control (Db’s) for normal and specialized electrical installations.

• Maintain your legal compliance . . . .

S U M M A R YS U M M A R YS U M M A R YS U M M A R Y

../../IEMIE/EIR02.pdf

../../IEMIE/EIR02.pdf

Slide Slide 4545

Slide Slide 4646

The future The future The future The future currency in currency in currency in currency in

industry would be industry would be industry would be industry would be COMPETENCYCOMPETENCYCOMPETENCYCOMPETENCY

The future The future The future The future currency in currency in currency in currency in

industry would be industry would be industry would be industry would be COMPETENCYCOMPETENCYCOMPETENCYCOMPETENCY

Slide Slide 4747

QUESTIONS ?QUESTIONS ?QUESTIONS ?QUESTIONS ?QUESTIONS ?QUESTIONS ?QUESTIONS ?QUESTIONS ?

Slide Slide 4848

Thank-you very much !My Contact details:My Contact details:

CellCell :: 082 895 6741082 895 6741

FaxFax :: (086) (086) 658 8404658 8404

EE--mail mail :: [email protected]@hazloc.co.za

mailto:[email protected]

legal compliance - flp.co.za presentations/2010... · legal compliance of all hazardous locations...

Documents