LED Walk-In LightingTrim 60% to 90% of

Walk-In Lighting Energy Cost Instantly

Kason GreenGuard LED walk-in lighting is a fast,

simple, inexpensive way for any food service

operation to save substantially on energy costs,

with an easy retrofit and astonishingly quick ROI.

The Problem

50,000

45,000

40,000

35,000

30,000

25,000

20,000

15,000

10,000

5,000

0FLUORESCENT LED

= Lamp Life = Operation

LAMP LIFE VS. OPERATIONAL NEEDS IN ONE YEAR

HO

URS

Existing walk-in lighting - whether incandescent or fluorescent - uses technology up to 10 years old. It was not specifically designed to perform in cold to freezing environments.

Incandescent lighting uses excessive electricity, and in your Walk-In generates enough heat to run a deep fryer.

Fluorescent bulbs dim way down in the cold, and can take up to 20 minutes to warm up enough to throw out usable light levels. The only way to deal with this is to leave the lights on continually. The energy costs soar, and bulb life diminishes.

HEAT GAIN PER YEAR

$800

$700

$600

$500

$400

$300

$200

$100

$0

= T12HO Freezer

= 1810LX LED Freezer

= T12HO Cooler

= 1806 LED Cooler

CO

ST P

ER Y

EAR

Change Bulbs Once Every 6 Years, Not Once Every Year Stop Spending Money to Cool Off Your Lighting

LEFT: Thermal image of traditional 75 Watt incandescent bulb.

RIGHT: New Kason GreenGuard 11.5 Watt bulb.

RUNNING COOL The 1806 LED emits 85% less heat than a traditional incandescent bulb, saving you more than $200/fixture/year in energy cost.

The 1810LX LED emits 75% less heat than a traditional (T-12) fluorescent bulb saving you more than $100/fixture/year in energy cost.

In multi-unit chain operations, the savings per light adds up fast.

Converting 100 incandescent fixtures to Kason 1806 LED’s could generate a savings of $20,000 per year.

The SolutionGreenGuard LED lighting is the first state-of-the-art lighting designed specifically for retrofitting existing walk-ins. The 1806 and 1810LX fixtures replace all existing standard incandescent and fluorescent bulbs, with no adjustments or modifications. Take them out of the box, put them in, and turn them on. GreenGuard gives you

usable light levels instantly, with no warm-up time. No need to leave lights on continually.

The 1901 motion sensor is the optimum control to utilize with GreenGuard LED lighting. Field tests have shown reduction of lights on time by up to 90% in freezers and up to 60% in coolers.

BEFORE: 1804 Fluorescent Ballast AFTER: Kason 1806 LED

LIGHTS THAT LAST FOR YEARS The GreenGuard 1806 LED lasts 50,000+ hours at full brightness, providing 6-7 years of continuous use. That’s 66 times longer than a typical incandescent bulb.

The GreenGuard 1810LX LED lasts for 50,000+ hours at full brightness, providing 6-7 years of continuous use. That’s 5 times longer than a typical fluorescent bulb.

GREENGUARD 1806 LED TYPICAL 100 WATT INCANDESCENT BULB

VS

GREENGUARD 1810LX LED TYPICAL FLUORESCENT LAMP

VS

Kason GreenGuard LED walk-in lighting is a fast, simple, inexpensive way for any restaurant operator to save substantially on energy costs, with an easy retrofit and an astonishingly quick ROI.

But don’t take our word on it. We can prove it.

The ProblemExisting walk-in lighting- whether incandescent or fluorescent- uses technology up to 10 years old. It wasn’t designed to perform in cold to freezing environments.

Incandescent lighting draws electricity like mad, and in a walk-in, it generates enough heat to run a deep-fryer.

Fluorescent bulbs dim way, way down in the cold, and can take up to 20 minutes to warm up enough to throw out usable light levels. The only way to deal with this is to leave the lights on continually. The energy costs soar, and bulb life dives.

Fluorescent (Left)VS.

Kason LED (Right)

The TestLast year, a major restaurant (15,500 stores nationwide) tested Kason’s GreenGuard LED’s for themsleves. They retrofitted 5 stores in the Atlanta, Georgia area with GreenGuard LED fixtures and motion sensors. The test was strictly supervised by the restaurant as to light levels, strike time, heat generation, ease of use, employee feedback, and ROI, over a 6 month period.

The ProofRetrofitting the walk-in with GreenGuard 1806 and 1810 LED fixtures controlled by our 1901 motion sensor paid for itself in less than one year, with an annual savings of approximately $2000 per store. Over the first three years of operation, each location will save over $4000, including the initial investment.

The Savings and Benefits from Multiple UnitsThe math is simple and compelling. With a GreenGuard walk-in retrofit, if you operate 10 stores, you can save about $20,000 a year, and with fifty stores you can save about $100,000 a year. And all this can be trimmed quickly and easily from an area where, up until now, there’s been no practical way to lower energy costs.

0

5,000

10,000

15,000

20,000

25,000

30,000

35,000

40,000

45,000

50,000

Hours

Fluorescent LED

Lamp Life vs. Operational Needs in One Year

Lamp Life

Operation

Kason GreenGuard LED walk-in lighting is a fast, simple, inexpensive way for any restaurant operator to save substantially on energy costs, with an easy retrofit and an astonishingly quick ROI.

But don’t take our word on it. We can prove it.

The ProblemExisting walk-in lighting- whether incandescent or fluorescent- uses technology up to 10 years old. It wasn’t designed to perform in cold to freezing environments.

Incandescent lighting draws electricity like mad, and in a walk-in, it generates enough heat to run a deep-fryer.

Fluorescent bulbs dim way, way down in the cold, and can take up to 20 minutes to warm up enough to throw out usable light levels. The only way to deal with this is to leave the lights on continually. The energy costs soar, and bulb life dives.

Fluorescent (Left)VS.

Kason LED (Right)

The TestLast year, a major restaurant (15,500 stores nationwide) tested Kason’s GreenGuard LED’s for themsleves. They retrofitted 5 stores in the Atlanta, Georgia area with GreenGuard LED fixtures and motion sensors. The test was strictly supervised by the restaurant as to light levels, strike time, heat generation, ease of use, employee feedback, and ROI, over a 6 month period.

The ProofRetrofitting the walk-in with GreenGuard 1806 and 1810 LED fixtures controlled by our 1901 motion sensor paid for itself in less than one year, with an annual savings of approximately $2000 per store. Over the first three years of operation, each location will save over $4000, including the initial investment.

The Savings and Benefits from Multiple UnitsThe math is simple and compelling. With a GreenGuard walk-in retrofit, if you operate 10 stores, you can save about $20,000 a year, and with fifty stores you can save about $100,000 a year. And all this can be trimmed quickly and easily from an area where, up until now, there’s been no practical way to lower energy costs.

0

5,000

10,000

15,000

20,000

25,000

30,000

35,000

40,000

45,000

50,000

Hours

Fluorescent LED

Lamp Life vs. Operational Needs in One Year

Lamp Life

Operation

FLUORESCENT KASON LED

VS

Bulb Life: 7 Years vs 2 Months

Bulb Life: 7 Years vs 16 Months

THE TESTIn 2010 and 2011, a major restaurant chain tested Kason’s GreenGuard LED’s for themselves. They retrofitted 6 stores around the country with GreenGuard LED fixtures and motion sensors. The test was strictly supervised by the restaurant to monitor before and after light levels, strike time, heat generation, ease of use, employee feedback, and ROI, over a 6 month period.

THE PROOF Retrofitting the walk-in with GreenGuard 1806 and 1810LX LED fixtures controlled by our 1901 motion sensor paid for itself in less than one year, with an annual savings of approximately $2000/store. Over the first three years of operation, each location will save over $4000, including the initial investment.

MULTIPLE UNITS MEAN MULTIPLE SAVINGSThe math is simple and compelling. With a GreenGuard walk-in retrofit, if you operate 10 stores, you can save about $20,000/year, and with fifty stores you can save about $100,000/year. All trimmed quickly and easily from an area where, up until now, there’s been no practical way to lower energy costs.

Light Output Number of Fixtures 3 2 Hours of Operation per Week 168 13 Total Power (KWH/fixture) 1,310.4 27.0 Power Cost ($KWH) $0.103 $0.103 Light Ouput Cost per Year $404.91 $5.57 $399.34

Heat Gain (Refrigeration Cost) Heat Gain Cost per Year $770.51 $9.39 $761.12

Lamp Replacement Lamp Life (hrs) 10,000 50,000 Hours of Operation per Year 8,736 676

# Replacements per Year 0.874 0.000 Replacement Lamp Cost per Fixture $16.00 Labor Cost $5.00 Annual Lamp Cost $55.04 $55.04

Total Annual Operating Cost $1,230.46 $14.96Annual Operating Savings $1,215.50Total Retrofit Cost (covers LEDs and Labor) $955.00

FREEZER

Existing FixtureT12HO

REPLACEMENT:1810LX LED

and1901 Motion

Sensor40w

LED Savings

With LED, no replacement expected for 20 yrs.

Light Output Number of Fixtures 2 4 Hours of Operation per Week 168 65 Total Power (KWH/fixture) 1,310.4 38.9 Power Cost ($KWH) $0.103 $0.103 Light Ouput Cost per Year $269.94 $16.01 $253.93

Heat Gain (Refrigeration Cost) Heat Gain Cost per Year $513.67 $34.77 $478.90

Lamp Replacement Lamp Life (hrs) 10,000 50,000 Hours of Operation per Year 8,736 3,380

# Replacements per Year 0.874 0.068 Replacement Lamp Cost per Fixture $16.00 Labor Cost $5.00 Annual Lamp Cost $36.69 $36.69

Total Annual Operating Cost $820.30 $50.79Annual Operating Savings $769.52Total Retrofit Cost (covers LEDs and Labor) $975.00

With LED, no lamp replacement expected for 12 yrs.

COOLER

Existing FixtureT12HO

REPLACEMENT:1806LED Jelly

Jar and1901 Motion

Sensor12w

LED Savings

Combined Freezer and Cooler Retrofit Cost : $1,930.00Combined Freezer and Cooler Annual Savings: $1,985.02 Payback (years): 0.97

ONE TEST STORE ROI COVERING WALK-IN COOLER/FREEZER COMBINATION

The Kason LED Line1810LX LED• Can pay for itself in less than 12 months.• Newest generation of SMD light engines provides state of the art lighting.• 96 lumens/watt; exceeds Federal Energy Act Requirements.• Suitable for wet/cooler/freezer locations.• Mercury free.• Unbreakable polycarbonate enclosure• Eligible for rebates through DesignLights Consortium® participating utilities.• 5-year limited warranty.

1806 LED• Can pay for itself in less than 12 months.• 73 lumens/watt exceeds Federal Energy Act Requirements.• Designed for wet/cooler/freezer environements.• Mercury free.• Unbreakable lexan globe.• Features LIFO (Light Intensifying Focusing Optics) for precise light placement where it is needed.• 3-year limited warranty, 5-year limited warranty on fixture.

1806-11 LED ADAPTOR• Quickly converts old jelly jar fixtures to energy efficient LED fixtures.• Does not require an electrician to install.• Installation is as quick and easy as screwing in a lamp.• 3 year limited warranty on lamp.

1901A MOTION SENSOR • Designed for Walk-In Coolers/Freezers.

• Can significantly reduce lights on-time in unoccupied Walk-Ins. Field testing has shown reductions of 60% in coolers and 90% in freezers.• Meets Federal regulations for Walk-Ins.

Before: 4’ Fluorescent Ballast

After: 4’ Kason 1810LED

The Solution

GreenGuard LED lighting is the first state-of-the-art lighting designed specifically for retrofitting existing walk-ins.

The 1806 and 1810 fixtures replace all existing standard incandescent and fluorescent bulbs, with no adjustments or

modifications. Take them out of the box, put them in, and turn them on.

GreenGuard gives you usable light levels instantly, with no warm-up time. No need to leave lights on continually.

The 1901 motion sensor has a wide range of settings, so you can tailor your energy use by the minute. No worrying

about strike time or heat generation.

1810LED• Can pay for itself in less tahn 12 months.

• 62 lumens/watt; exceeds Federal Energy Act

• Requirements.

• Suitable for wet/cooler/freezer locations.

• Unbreakable lexan lense.

• 50,000 hours life.

• 3-year limited warranty, 5 years limited warranty on fixture.

• Mercury free.

1806LED• Can pay for itself in less than 12 months.

• 85 lumens/watt exceeds Federal Energy Act Requirements.

• Designed for wet/cooler/freezer environements.

• Mercury free.

• Unbreakable lexan globe.

• Features LIFO (Light Intensifying Focusing Optics) for precise

light placement where it is needed.

1901 MOTION SENSOR

• Designed for Walk-In Coolers/Freezers.

• Can significantly reduce lights on-time in unoccupied Walk-Ins. Field

testing has shown reductions of 60% in coolers and 90% in freezers.

• Meets Federal regulations for Walk-Ins.

1806LED ADAPTER

• Quickly converts old jelly jar fixtures to energy efficient LED fixture.

• Installation is as quick and easy as screwing in a lamp.

• 3 year limited warranty on lamp.

The Kason LED Line

$0.00

$100.00

$200.00

$300.00

$400.00

$500.00

$600.00

$700.00

$800.00

Cost Per Year

Heat Gain Per Year

2 x T12HO Freezer2 x 1810LED Freezer

2 x T12HO Cooler1 x 1806LED Cooler

1808 LED• Designed to reduce electrical usage by 85%.• Minimal heat generation will lower utility cost.• 75 lumens/watt; exceeds Federal Energy Act Requirements.• Designed for damp/wet/cooler/freezer environments.• Mercury free.• High impact Lexan globe with anti-glare technology.• 5-year limited warranty.

You can feel secure about specifying or retrofitting with Kason GreenGuard LED lighting. Kason’s been building innovative, durable hardware solutions since 1926. We’re still owned and run by the same family that started the company, and we back our products with pride.

Smart Since 1926

Kason will help you see a dramatic difference in your walk-ins. Give us a call at 1.800.935.2766, or e-mail us at greenguard@kasonind.com.

Serving You Since 1926

Kason Industries, Inc. 57 Amlajack Boulevard Newnan, GA 30265 greenguard@kasonind.com www.kasonind.com

The GreenGuard Walk-In Makeover

Trims 60% to 90% of lighting energy costs

instanty.COMPONENT

ThermalFlex® VINYL SYSTEMS CAN SAVE YOU 10% OF YOUR WALK-IN ENERGY COSTS

CLEAR SWING DOOR ALTERNATIVE• Protects coolers, freezers and storerooms from wide

temperatures fluctuations; saves energy.• Strong stainless steel gravity hinges close door quickly,

but gently.• Hinges warranted rust-proof for 10 years. Won’t rust

even in high humidity.• Exclusive, adjustable cam blocks assure that open door

swings back to center position, even if door jamb is out of line.

• Versatile hinges adapt to all door widths, so no wait for special orders.

• Heavy, clear vinyl panels are easy to clean; provides high visibility.

• Meet sanitary codes. Vinyl materials available to meet USDA, NSF and local standards.

KASON EASIMOUNT™ STRIP SYSTEMS• Maintain consistent temperature and reduce energy use for coolers

and freezers.• Easiest mounting system on the market features pre-cleated, slide-in

vinyl strips for quick mounting and removal.• Strong, light weight aluminum track installs easily.• Tracks accept vinyl strips in wide range of widths and materials.

Match or mix materials and widths.

Serving You Since 1926

Kason Industries, Inc. 57 Amlajack Boulevard Newnan, GA 30265 greenguard@kasonind.com www.kasonind.com

The GreenGuard Walk-In Makeover

Trims 60% to 90% of lighting energy costs

instanty.COMPONENT

ThermalFlex® VINYL SYSTEMS CAN SAVE YOU 10% OF YOUR WALK-IN ENERGY COSTS

CLEAR SWING DOOR ALTERNATIVE• Protects coolers, freezers and storerooms from wide

temperatures fluctuations; saves energy.• Strong stainless steel gravity hinges close door quickly,

but gently.• Hinges warranted rust-proof for 10 years. Won’t rust

even in high humidity.• Exclusive, adjustable cam blocks assure that open door

swings back to center position, even if door jamb is out of line.

• Versatile hinges adapt to all door widths, so no wait for special orders.

• Heavy, clear vinyl panels are easy to clean; provides high visibility.

• Meet sanitary codes. Vinyl materials available to meet USDA, NSF and local standards.

KASON EASIMOUNT™ STRIP SYSTEMS• Maintain consistent temperature and reduce energy use for coolers

and freezers.• Easiest mounting system on the market features pre-cleated, slide-in

vinyl strips for quick mounting and removal.• Strong, light weight aluminum track installs easily.• Tracks accept vinyl strips in wide range of widths and materials.

Match or mix materials and widths.

CLEAR SWING DOOR ALTERNATIVE• Protects coolers, freezers and storerooms from wide temperatures fluctuations; saves energy.• Strong stainless steel gravity hinges close door quickly, but gently.• Hinges warranted rust-proof for 10 years. Won’t rust even in high humidity.• Exclusive, adjustable cam blocks assure that open door swings back to center position, even if door jamb is out of line.• Versatile hinges adapt to all door widths, so no wait for special orders.• Heavy, clear vinyl panels are easy to clean; provides high visibility.• Meet sanitary codes. Vinyl materials available to meet USDA, NSF and local standards.

KASON EASIMOUNT™ STRIP SYSTEMS• Maintain consistent temperature and reduces energy use for coolers and

freezers.• Easiest mounting system on the market features pre-cleated, slide-in vinyl strips for quick mounting and removal.• Strong, light weight aluminum track installs easily.• Tracks accept vinyl strips in wide range of widths and materials. Match or mix materials and widths.

THERMALFLEX VINYL SYSTEMS CAN SAVE YOU 10% OF YOUR WALK-IN ENERGY

Smart Since 1926

Kason Industries, Inc. 57 Amlajack Boulevard Newnan, GA 30265

greenguard@kasonind.com www.kasonind.com

800.935.2766

LISTEDCOMPONENT LISTED