LED T8 TUBE LIGHT

• Standard T8 4-ft and 8-ft tubes.

• 18W/36W lights, up to 90% energy saving.

• Wide range input design, 100~277 VAC.

• Environmental friendly, no lead, no mercury.

• Long lifespan, up to 50,000 hours.

• G13/Fa8 base, fast & easy installation.

• UL (E472276), *DLC 4.0. *DLC for 4-ft LED tube lights only.

4-FT Product Dimension (in mm)

4-FT Product Specification

Item NO. CCT Voltage Wattage Lumen Luminous Efficiency

Beam Angle

T8-4-18-3000K (BDT4SUA-18WB-3000)

3000K 100~277VAC 20W 2400 lm 120 lm/W 120°

T8-4-18-5000K (BDT4SUA-18WB-5000)

5000K 100~277VAC 20W 2400 lm 120 lm/W 120°

T8-4-18-5000K-F (BDT4SUA-18WB-5000)

5000K 100~277VAC 20W 2500 lm 125 lm/W 120°

T8-4-18-6000K (BDT4SUA-18WB-6000)

6000K 100~277VAC 20W 2500 lm 125 lm/W 120°

Other Technical Data

Input Voltage 100~277 VAC

Input Current (@120VAC) 180 mA

Input Frequency 47/63 Hz

Wattage 20W ± 1W

CRI ≥80 Ra

Beam Angle 120°

Power Factor ≥0.9

Materials Aluminum & PC cover*

Working Humidity 25~90 %RH

Working Temp. -20°C~+45°C

Storage Temp. -25°C~+65°C

LED Chip 2835

Dimming NO

* The default cover is clear, with Frosted cover (-F) optional for T8-4-18-5000K.

8-FT Product Dimension (in mm)

8-FT Product Specification

Item NO. CCT Voltage Wattage Lumen Luminous Efficiency

Beam Angle

T8-8-36-5000K-F (BDT88FUA-36WB-S50F)

5000K 100~277VAC 36W 4320 lm 120 lm/W 120°

T8-8-36-6000K (BDT88FUA-36WB-S60F)

6000K 100~277VAC 36W 4320 lm 120 lm/W 120°

Other Technical Data

Input Voltage 100~277 VAC

Input Current 350 mA

Input Frequency 47/63 Hz

Wattage 36W ± 2W

CRI ≥80 Ra

Beam Angle 120°

Power Factor ≥0.9

Materials Aluminum & PC cover*

Working Humidity 25~90 %RH

Working Temp. -20°C~+45°C

Storage Temp. -25°C~+65°C

LED Chip 2835

Dimming NO

* The default cover is clear, with Frosted cover (-F) optional for T8-8-36-5000K-F.

New Installation: T8-4ft, Single-end Wiring (no ballast)

New Installation: T8-4ft, Double-end Wiring (no ballast)

Direct Replacement: T8-4ft, Electronic Ballast

Replacement: T8-4ft, Inductive Ballast with Starter

(Pre-heat Luminaire)

Remove inductive ballast and starter! Rewire as following !

New Installation: T8-8ft, Single-end Wiring (no ballast)

Direct Replacement: Electronic Ballast