led-symbol-leuchte led symbol indicator blendenkopf

2
LED Symbol Indicator Square lens head SKHH10x2x LED-Symbol-Leuchte Blendenkopf quadratisch SKHH10x2x RoHS Compliant LED-Symbol-Leuchte für Snap-in Befestigung. Flacher, oberflächenmatter Blendenkopf in quadratischer Form. Sehr guter Ein/Aus Kontrast. Geeignet für Plattenstärken ab 1,5 mm. Einweg-Gleichrichtung. LED symbol indicator for snap-in mounting. Flat square lens head with matt surface. A very good on-off contrast. Suitable for panel thicknesses from 1,5 mm. Half-wave rectification. Gehäuse: Farbig transparent mit Snap-in Befestigung Einbau-Öffnung: Ø10+0,2 mm Schutzart: IP40 Anschluss: Flachstecker 2,8 x 0,8 mm Löttemperatur: 260°/5 Sek. Betriebsspannung: 12/14V DC (AC) 24/28V DC (AC) 130V AC 230V AC Housing: Colored transparent with snap-in mounting Mounting-hole: Ø10+0,2mm Protection class: IP40 Connection: Tab terminal 2,8 x 0,8 mm Soldering temperature: 260°/5 sec. Operating voltage: 12/14V DC (AC) 24/28V DC (AC) 130V AC 230V AC Specification Spezifikation Material Teil Material Material Part Materialien Gehäuse Polycarbonat farbig transparent Housing Polycarbonate colored transparent Isolierteil Polycarbonat Insulating part Polycarbonate Anschluss Flachstecker 2,8x0,8mm Messing blank Connection Tab terminal 2,8x0,8mm brass bright Storage Temperature -40°C/+100°C Operation Temperature -30°C/+75°C Betriebstemperatur -30°C/+75°C Lagertemperatur -40°C/+100°C Seite 1 Signal-Construct elektro-optische Anzeigen und Systeme GmbH email [email protected] web http://www.signal-construct.de Tel. +49 7233 9531-0 Fax +49 7233 9531-29 Brückenäckerweg 4 DE 75223 Niefern Num: 333 Stand 13.03.14

Upload: others

Post on 16-Oct-2021

16 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LED-Symbol-Leuchte LED Symbol Indicator Blendenkopf

LED Symbol IndicatorSquare lens headSKHH10x2x

LED-Symbol-LeuchteBlendenkopf quadratischSKHH10x2x

RoHSCompliant

LED-Symbol-Leuchte für Snap-in Befestigung.Flacher, oberflächenmatter Blendenkopf inquadratischer Form. Sehr guter Ein/AusKontrast.Geeignet für Plattenstärken ab 1,5 mm.Einweg-Gleichrichtung.

LED symbol indicator for snap-in mounting.Flat square lens head with matt surface.A very good on-off contrast.Suitable for panel thicknesses from 1,5 mm.Half-wave rectification.

Gehäuse: Farbig transparent mit Snap-in BefestigungEinbau-Öffnung: Ø10+0,2 mmSchutzart: IP40Anschluss: Flachstecker 2,8 x 0,8 mmLöttemperatur: 260°/5 Sek.Betriebsspannung: 12/14V DC (AC) 24/28V DC (AC) 130V AC 230V AC

Housing: Colored transparent with snap-in mountingMounting-hole: Ø10+0,2mmProtection class: IP40Connection: Tab terminal 2,8 x 0,8 mmSoldering temperature: 260°/5 sec.Operating voltage: 12/14V DC (AC) 24/28V DC (AC) 130V AC 230V AC

SpecificationSpezifikation

MaterialTeil Material MaterialPartMaterialien

Gehäuse Polycarbonat farbigtransparent

Housing Polycarbonate coloredtransparent

Isolierteil Polycarbonat Insulating part Polycarbonate

Anschluss Flachstecker 2,8x0,8mmMessing blank

Connection Tab terminal 2,8x0,8mmbrass bright

Storage Temperature -40°C/+100°C

Operation Temperature -30°C/+75°CBetriebstemperatur -30°C/+75°C

Lagertemperatur -40°C/+100°C

Seite 1

Signal-Construct elektro-optischeAnzeigen und Systeme GmbH

email [email protected] http://www.signal-construct.de

Tel. +49 7233 9531-0Fax +49 7233 9531-29

Brückenäckerweg 4DE 75223 Niefern

Num: 333 Stand 13.03.14

Page 2: LED-Symbol-Leuchte LED Symbol Indicator Blendenkopf

OptionsOptionenEinbau anderer LED Typen gleicher Bauform aufAnfrage möglich

Mounting of other LED types in the same size onrequest

Abweichende Gehäuseeinfärbungen Various housing colouringsAuch in Sonderspannungen lieferbar Also available in special voltages

Farb

eCo

lor

Stro

mCu

rren

t

Lich

tstä

rke

Lum

inou

s In

tens

ity

Leis

tung

Pow

er

Lich

tstr

omLu

min

ous

Flux

Span

nung

Volt

age

Vollw

inke

lVi

ewin

g An

gle

Lebe

nsda

uer

Life

-Tim

e

Artikel/ Part Artikel-Text Part-Text

Leuc

htdi

chte

lum

inou

s de

nsit

y

cd/m²12 V 10.000 mcd/

@ 20,000 mAred 216 mWrot

60000 h15° lm 18 mALED Symbol-Leuchte quadratisch ROT 12/14V DC(AC) LED Symbol Indicator square RED 12/14V DC(AC)SKHH10022

cd/m²24 V 10.000 mcd/

@ 20,000 mAred 408 mWrot

60000 h15° lm 17 mALED Symbol-Leuchte quadratisch ROT 24/28V DC(AC) LED Symbol Indicator square RED 24/28V DC(AC)SKHH10024

cd/m²12 V 10.000 mcd/

@ 20,000 mAyellow 216 mWgelb

60000 h15° lm 18 mALED Symbol-Leuchte quadratisch GELB 12/14V DC(AC) LED Symbol Indicator square YELLOW 12/14V DC(AC)SKHH10122

cd/m²24 V 10.000 mcd/

@ 20,000 mAyellow 408 mWgelb

60000 h15° lm 17 mALED Symbol-Leuchte quadratisch GELB 24/28V DC(AC) LED Symbol Indicator square YELLOW 24/28V DC(AC)SKHH10124

cd/m²12 V 200 mcd/

@ 20,000 mAgreen 216 mWgrün

60000 h30° lm 18 mALED Symbol-Leuchte quadratisch GRÜN 12/14V DC(AC) LED Symbol Indicator square GREEN 12/14V DC(AC)SKHH10222

cd/m²24 V 200 mcd/

@ 20,000 mAgreen 408 mWgrün

60000 h30° lm 17 mALED Symbol-Leuchte quadratisch GRÜN 24/28V DC(AC) LED Symbol Indicator square GREEN 24/28V DC(AC)SKHH10224

cd/m²230 V 200 mcd/

@ 20,000 mAgreen 300 mWgrün

60000 h30° lm 2,5 mALED Symbol-Leuchte quadratisch GRÜN 230V AC LED Symbol Indicator square GREEN 230V ACSKHH10228

cd/m²12 V 1.400 mcd/

@ 20,000 mAblue 168 mWblau

60000 h20° lm 14 mALED Symbol-Leuchte quadratisch BLAU 12/14V DC(AC) LED Symbol Indicator square BLUE 12/14V DC(AC)SKHH10422

cd/m²24 V 1.400 mcd/

@ 20,000 mAblue 360 mWblau

60000 h20° lm 15 mALED Symbol-Leuchte quadratisch BLAU 24/24V DC(AC) LED Symbol Indicator square BLUE 24/24V DC(AC)SKHH10424

cd/m²12 V 2.320 mcd/

@ 20,000 mAwhite 36 mWweiss

60000 h65° lm 3 mALED Symbol-Leuchte quadratisch WEISS 12/14VDC(AC) LED Symbol Indicator square WHITE 12/14VDC(AC)SKHH10622

cd/m²24 V 2.320 mcd/

@ 20,000 mAwhite 24 mWweiss

60000 h65° lm 1 mALED Symbol-Leuchte quadratisch WEISS 24/28V DC(AC) LED Symbol Indicator square WHITE 24/28V DC(AC)SKHH10624

FPI

The life time of an LED is defined as decrease of brightness by 50% ofthe initial value

Lebensdauer: Die Lebensdauer einer LED ist definiert als Abnahme derHelligkeit auf 50% des Ausgangswertes

Seite 2

Technische Änderungen vorbehalten. Datenblatt unterliegt nicht demÄnderungsdienst.

Specifications are subject to change without notice.

Num: 333-SKHH10X2X Stand 13.03.14

Signal-Construct elektro-optischeAnzeigen und Systeme GmbH

email [email protected] http://www.signal-construct.de

Tel. +49 7233 9531-0Fax +49 7233 9531-29

Brückenäckerweg 4DE 75223 Niefern

Wir achten bei Entwicklung und Herstellung unserer Produkte auf einenmöglichst geringen Einsatz von Ressourcen und auf niedrigenEnergiebedarf im Betrieb.Bitte prüfen Sie, ob es unbedingt erforderlich ist, das gesamteDokument zu Drucken. So schonen Sie zusätzlich Ressourcen undunsere Umwelt.

We care for environment when producing and manufacturing ourproducts. Also we care for a low power consumption and a lowconsumption of resources.Please consider environmental responsibility before printing thisdocument

The technical data are typical figures.Die angegebenen technischen Daten sind typische Durchschnittswerte.

Helligkeitswerte sofern nicht anders angegeben gemessen nach IEC127. Photometry according to IEC127 unless otherwise indicated.

Wir empfehlen das Dokument mit der Einstellung "Seitengrößeanpassen" zu Drucken

We recommend to print the document with option "Fit to Page"