led silicone neon - vivalyte · 2020. 2. 13. · spiral using bendable using cut straight and do...
TRANSCRIPT
LED Silicone NeonFirst maker of silicone neon flex in China
CONTENT01 Introduction02 Testings03 Installation04 Case Study
Curved into shapes and letters in the same plane as the mounting surface.
S Series (Side Bending)N2-4 NS2-6M QNS5-10NS2-10
Ideal for straight runs or mounting to a curved surface.
D Series (Top Bending)ND2-14 NDF2-16 QND5-20 QNDF4-16
220V AC direct, eliminating the need and failure of DC driver.
AC Series (AN2-4)
High light transmission
Silicone extrusion
OdorlessGood heat dissipation
FlexibilityEnvironmental friendly UV resistance
LED light sourceSaturated, homogeneous linear LED strip light as light source inside for the look of neon with more energy saving and longer lifespan.
Constant current IC solution to have a constant flux level along the light.Constant Brightness
Long operational lengthOur DC LED neon light can span for lengths up to 30m [98.4 ft]in double feed (some models), and AC neon up to 50m [164 ft] for less wiring, labor and cost.
DimmableThe ability to Interface with automation & control systems, making you enjoy full control over the lighting with DALI, DMX, Triac
Short cuttable sectionThe shortest cuttable length is to 0.39" [10mm], allowing you to cut pieces to the exact length that you need.
Perfect for outdoorIP67 protect against dust, water, and condensation in outdoor operation.
UV resistance makes it protect from harsh sunlight.
Red Green Blue Yellow White
Make it colorful
Easy to InstallMounting clip accessories available to increase the versalilty of the system.
CertificatesOur Neon light is tested and qualified to UL Underwriters Laboratory, and CE & RoHS certified by SGS.
Ambient lightingBuilding facades, stage, art etc.
Applications
Signage LightingNeon sign, pattern, display, luminous letter etc.
Specifications (AC Series)Model No.Ra
LED QTY/m
Colors
Beam Angle
Luminous Flux
Ingress Protection
VoltagePower/m
Max Run in Single FeedCuttable Length
Working TemperatureStorage Temperature
AN2-480+220VAC
10wIP67184 deg120PCS510lm/ 230/650/420/90lm50m
500mm
W/R/G/B/Y-20~+60℃-20~+70℃
CCT/wavelength 2900-25000K(White)
Warranty 5 years
Specifications (S Series)
* WT: Working Temperature ST: Storage Temperature SD: Shipping Dimension GW: Gross Weight
N2-4 NS2-6M NS2-10 QNS5-10
5 years
24V
30/15m (Double/Single feed)
IP67
546 Lm/m (White)
R/G/B/Y/W
9.6W/m
120LEDs/m
8/4m (Double/Single feed)
50mm cuttable
24V 24V 24V
12W/m 7.68W/M 17.28W/m
120LEDs/m 120LEDs/m 108LEDs/m
R/G/B/Y/W R/G/B/Y/W RGB
433 Lm/m (White) 300 Lm/m (White) 55.25/136.79/26.19 lm/m (R/G/B)
10/5m (Double/Single feed) 30/15m (Double/Single feed)
IP67 IP67 IP67
50mm cuttable 62.5mm cuttable
-20~+60°C (WT) -20~+60°C -20~+60°C -20~+60°C
55.6mm cuttable
3 years 3 years 4 years
-20~+70°C (ST) -20~+70°C -20~+70°C -20~+70°C
12*25mm (W*H) 6*14mm (W*H) 10*15mm (W*H) 10*17mm (W*H)
380*350*350/390*390*325mm (SD)
12.3Kg (GW)
390*390*325mm (SD)
14.3Kg (G.W.)
375*375*200mm (SD)
6.8/11.7Kg (G.W.)
390*390*200mm (SD)
15.5Kg (G.W.)
12mm
10mm
25mm
6mm
14mm
10mm
15mm
10mm
17mm
Specifications (S Series)
* WT: Working Temperature ST: Storage Temperature SD: Shipping Dimension GW: Gross Weight
NSR2-6MD-H ZNSR4-10
3 years
12V
10/5m (Double/Single feed)
IP67
210 Lm/m (White)
R/G/B/Y/W
11.52W/m
96LEDs/m
10.4mm cuttable
24V
13W/m
60LEDs/m
RGB
60 Lm/m
20/10m (Double/Single feed)
IP67
100mm cuttable
-20~+60°C (WT) -20~+60°C
3 years
-20~+70°C (ST) -20~+70°C
8*15mm (W*H) 12*25mm (W*H)
390*390*325 (SD)
14.68Kg (GW)
390*390*325mm (SD)
16.15Kg (G.W.)
6mm
8mm
15mm
10mm
12mm
25mm
Specifications (D Series)
* WT: Working Temperature ST: Storage Temperature SD: Shipping Dimension GW: Gross Weight
ND2-14
5 years
24V
30/15m (Double/Single feed)
IP67
650 Lm/m (White)
R/G/B/Y/W
7.68W/m
112LEDs/m
63mm cuttable
24V 24V
12W/M 15.3W/m(W)
112LEDs/m 96LEDs/m
R/G/B/Y/W R/G/B/Y/W
460 Lm/m (White) 494 lm/m (White)
30/15m (Double/Single feed)
IP67 IP67
62.5mm cuttable
-20~+60°C (WT) -20~+60°C -20~+60°C
62.5 cuttable
4 years 4 years
-20~+70°C (ST) -20~+70°C -20~+70°C
14*13.2mm (W*H) 16*17mm (W*H) 20*18mm (W*H)
430*400*390mm (SD)
14.5Kg (GW)
375*375*200mm (SD)
6.8/11.7Kg (G.W.)
375*375*325mm (SD)
17Kg (G.W.)
QND5-20NDF3-16
20/10m (Double/Single feed)
14mm
13.2mm
16mm
17mm
20mm
19mm
24V
18W/M
112LEDs/m
200-25000K
1112 Lm/m (White)
20/10m (Double/Single feed)
IP68
62.5mm cuttable
-20~+60°C
3 years
-20~+70°C
16*17mm (W*H)
390*390*325mm (SD)
15,5/16,95Kg (G.W.)
NDF4-16
16mm
17mm
TÜV Accredited
First-Class Testing Laboratory
Blueview has a complete set of testing equipment, which can
independently undertake products testings including: lifespan test, reliability test, safety test, IP test, optical test, material test etc.,
laying the foundation for the product quality.
Electrical parameters
Light Source
Color parameters
Photo parameters
Power, current, voltage
Chromaticity coordinate, color rendering index
Luminous flux, efficiency
* For detail testing reports, please contact our sales person.
Tensile testing
Test StandardsIt is tested according to GB/T16491
Sample QuantityN2-4, 1m
Qualification CriteriaTo determine according to the corresponding technical requirements of the product.
Temperature & HumidityTest ConditionHigh temperature 80°C/humidity 85% 4H, normal temperature 20°C 30 minutes/low temperature -40°C4H, continuous cycle, and the rated operating voltage is switched once every one hour.
Test Time / Sample Quantity 360 hours / N2-4, 1m
Test ResultNo dead light, no cracking, no embrittlement or other damage.
Temperature ShockTest ConditionHigh temperature 80°C 4H, low temperature -40°C 4H continuous cycle (temperature shifting time 5 minutes), rated operating voltage is switched once every one hour.
Test Time360 hours
Sample QuantityN2-4, 1m
Test ResultNo dead light, no cracking, no embrittlement or other damage.
Test MethodIEC 60068-2-11:1981/Cor.1:1999
Test ConditionConcentration of solution collected: (5±1)% NaCl (m/m)Chamber temperature: (35±2) °CVolume of salt solution collected: (1.0~2.0) ml/ (80cm² ·h)pH of collected solution at (35±2) °C : 6.5~7.2Exposure period: 168h
Test ResultAppearance: No visual change
Neutral Salt Spray Test
Exposure CycleISO 4892-2:2013 Cycle 1Irradiance: (0.51±0.02)W/(m²· nm)@340nm102 min light at (65±3) °C BST, (38±3) °C CT, (50±10)%RH18 min light and water sprayFilter: Boro/Boro
Exposure Period1000 hours
Test ResultPass: Meet the requirements.
Light Ageing Test-Xenon-arc Exposure
Burn the sample with a lighter whithin 30s.
Release the ignition button, and the flame on the sample extinguished immediately.
Flammability
IP6XTest for protection against solid foreign objects indicated by the first characteristic numeral
Test duration: 8h
IP68 Teseting
IPX8Test for protection against water indicated by the second characteristic numeral
1 m below the surface of the water
Test duration: 1h
Test ConditionHigh temperature 80°C 4H, normal temperature 20 °C 1H, and low temperature -40°C 4H. The rated operating voltage is switched once every hour.
Test Time360 hours
Sample QuantityND2-14, 1m
Test ResultNo dead light, no cracking, no embrittlement or other damage.
Temperature Cycling
Effect of Liquids
Test MethodISO 1817:2015
Test ConditionImmersion, test temperature at 23 °C
Test ResultPass: Meet the requirements; no evident change
Test Solution92# gasoline
Test Time72 hours
Test LabSGS Guangzhou Branch
Test ConditionContinuous lighting the at room temperature for 288
hours.
Test ResultThe samples have no color change, no failure, no crack
and other damage.
Ageing
Precautions (S Series)
Cuttable mark Cut straight Slide a spindle into the roll and then place the roll with spindle on top of the box provided.
Do not cut on an angleLeft and right bending Gently unroll without excessive force
Incorrect bending Do not twist Do not repeatedly bending
Do not wringing Do not Bend to a 90° angle Incorrect bending
Precautions (S Series)
Cutting
Accessories (S Series)
End exit
N2-4 NS2-6M NS2-10 QNS5-10Picture Item
Bottom exit
Right side exit
Left side exit
End cap
Splice connector
L Connector
O-ring
Accessories (S Series)N2-4 NS2-6M NS2-10 QNS5-10Picture Item
Gasket
Aluminum track
Silicone glue 923L
White sheathed wire
Foldable housing
Grip plate
Plastic clip
Screw
Tools Ratcheting Cutter Electric Screwdriver
Silicone Glue Brush
Connection
* Silicone end version of N2-4 neon light as an
example, please refer to User Manual for more.
Structure Solder the power lead on the PCB
Glue the joint of light and end exit Push in the end exit to finish
End Exit
Glue at the end of light and end cap Push in the end cap to finish
End Cap
Connection
Insert the pin (the pin on the back of
PCB)
Finished
ConnectionSplice Connector
Apply glue on the light and housing,
then put the light into the housing
Close the housing
Structure
ConnectionL Connector
Insert the pin (the pin on the back of PCB)
Apply glue on the light and housing, then put the light into the housing
Close the housing
ConnectionL Connector
Insert the pin (the pin on the back of PCB)
Apply glue on the light and housing,
then put the light into the housing
Close the housing Finished
Installation Apply the Aluminum track onto the mounting surface with screws
Aluminum track only (Optional)
Push the light into the track Finished
Spiral using Bendable using Cut straight and do not cut on an angle
No left and right bending Do not Bend 90 °
Precautions (D Series)
Do not twist and do not bend repeatedly
Accessories (D Series)
End exit
ND2-14 NDF2-16 QND5-20 QNDF4-16Picture Item
End cap
Plastic clip
Grip plate
Aluminum track
Silicone clip
Screw
Silicone glue 923L
Connection
* Take ND2-14 neon light as an example, please refer to User Manual for more.
Structure Solder the power lead on the back of PCB
Glue the joint of light and end exit Push in the end exit to finish
End Exit
Glue at the end of light and end cap Push in the end cap to finish
End Cap
Connection
Installation Screw the clip onto the mounting surfaceStructure
Push the light into the track Finished
Case Study
Hospital in Abu Dhabi Our pink N2-4 neon lights were used for this hospital building
facade in Abu Dhabi to bring a vitality & elegance atmosphere
Hard Rock CafeHard Rock is a haven for fans of music, food, and great times.
HRC is known for its collection of rock-and-roll memorabilia.
Our LED silicone neon N2-4 products were used in this sign.
Guacs Mexican Grill The founders share a passion for quality Mexican food. People
could experience authentic flavors and ingredients as in Mexico.
Our N2-4 is used for the restaurant outline.
Hard Rock CafeHard Rock is a haven for fans of music, food, and great times.
HRC is known for its collection of rock-and-roll memorabilia.