led lighting & supply catalog...be visible. stay safe. ®this warranty does not cover travel...
TRANSCRIPT
LEDLighting& SupplyCatalogCommercial Truck Lighting & Accessories
Be Visible. Stay Safe. ®
Table of Contents
HEAVY DUTY LIGHTING / WARRANTY & RETURNSWARRANTYHeavy Duty Lighting (HDL) warranties each new product to the Original Purchaser (1), under normal use and service, to be free from defects of material and/or workmanship only, for Five Years from the date of manufacture stamped on the product (2), unless otherwise noted*. Warranties are not transferable and apply only to the original owner of the HDL product. During this warranty period, the obligation of HDL is limited to repairing or replacing, as HDL may elect, any part or parts of such product which after examination by HDL, are found to be defective as the result of a defect in material and/or workmanship. HDL will provide warranty for any unit which is delivered, transported prepaid, to the specified HDL facility or designated authorized warranty service center for examination and such examination reveals a defect in material and/or workmanship. This warranty does not cover travel expenses, the cost of specialized equipment for gaining access to the product, or labor charges for removal and re-installation of the product. Corroded connectors and broken or discolored lenses are not covered under warranty. Many states are using Magnesium Chloride or Calcium Chloride as de-icers, which cause severe corrosive action to electrical components. Due to the nature of our products, exposure to the elements and harsh chemicals can damage the finish. Care must be taken to ensure these products maintain their shine and finish. HDL will not be responsible for products damaged by alterations, misuse, abuse, accidents, improper installation or damage due to exposure to harsh chemicals and cleaning agents which can damage the plastics, rubber, chrome and stainless steel. Unless otherwise stated, HDL will not accept corrosion as a warranty claim. This warranty is in lieu of all other warranties, express or implied, including warranties of merchantability and fitness for a purpose. • Original Purchaser is the Distributor to whom
Heavy Duty Lighting initially sold the product. • Some products are produced without date stamps.
In the event a product was produced without a date stamp the documented Date of Purchase to the original purchaser may be required.
*Otherwise Noted / 1 Year Warranty Heavy Duty Lighting product group - “LED Replacement Style Bulbs” (HD1156/1157& HD3156/3157 series). Because of the design of this product (non-sealed or potted) and the multiple applications and vehicles this product is used in, it carries only a one year product warranty. With the exception of time, one year compared to five year, the warranty & returns policy for this product is the same in all other aspects as the standard HDL warranty and returns policy. Heavy Duty Lighting product group - “Electronic LED Flashers” (HDF series). This product group carries only a one year product warranty. With the exception of time, one year compared to five year, the warranty & returns policy for this product is the same in all other aspects as the standard HDL warranty and returns policy. Heavy Duty Lighting product group - “AC to DC Power Adaptor” (HDLC series). This product group carries only a one year product warranty. With the exception of time, one year compared to five year, the warranty & returns policy for this product is the same in all other aspects as the standard HDL warranty and returns policy.
Heavy Duty Lighting product group - “Strip Lights” (i.e. HD18027SMD-CW). If products are installed in exterior, under hood or HDL determined “severe” locations, this product group carries only a one year product warranty. Strip lights installed in interior locations carry HDL standard 5 year warranty. Other warranty & returns policy for this product is the same in all aspects as the standard HDL warranty and returns policy. RETURNSIn the unlikely event of a warranty claim, customers must contact HDL Customer Service Department to obtain a Return Material Authorization (RMA) number. HDL will not honor any warranty claims without proof of purchase and receipt of defective product. In advance of return for any failed product, customers must submit a warranty claim in writing or electronic format, which includes: • Date of Failure • Detailed Reason for Claim • Contact Person Name and Phone Number, Fax
Number or Email Address HDL will review the claim and if tentative approval is given a RMA number will be issued. All returning warranty claim packages must have the RMA number clearly marked on the outside of the return package and must be shipped freight prepaid. All products must be returned to the specified HDL facility or designated authorized warranty service center. Submitted products will be analyzed for cause failure, and if approved, a credit will be issued. Short pays or debit deductions are not allowed. Contested claims must be addressed in writing within 30 days of rejection notification. Note: Warranty claims will be approved for credit if it is determined that the cause of the defect was due to manufacturing or component deficiency, and not due to abuse, installation error, mishandling, improper maintenance, worn seals or chemical attack outside the normal working environment. THE FOLLOWING CONDITIONS APPLY TO ALL NON-WARRANTY RETURNS: • New product merchandise returns within 30
days from date of invoice require Return Material Authorization (RMA) number from HDL Customer Service Department prior to sending back. Any unopened merchandise accompanied by a RMA, within 30 days, can be returned for full refund or merchandise credit at customer’s option. Non-warranty claims outside of 30 days are not guaranteed and will not be accepted without prior authorization from HDL. All unauthorized returns will be refused.
• All approved merchandise returns, with RMA, are subject to inspection and final approval upon receipt by HDL. Returned merchandise must be in new, resalable condition: unopened, undamaged packaging, including all components, accessories, manuals, and registration cards. Shipping charges are not refundable except for cases of shipping error by HDL. HDL must be notified of all shipping errors within 30 days and reserves the right to choose the method of return shipment at its expense.
• Merchandise return requests outside of 30 days are not guaranteed and will be considered on an individual basis. If granted, new product returns outside of 30 days may require restocking fees (to be determined). Product returns outside of 30 days will only be allowed account credit and will require an offsetting order. Offsetting order value will be determined at the time RMA is issued. Product returns must be shipped at the owner’s expense, freight collect.
• Discontinued items are not eligible for return or credit.
P 04 LED PROJECTION DRIVING | WORK LIGHTS
P 12 LED STOP | TAIL | TURN & PARK TURN LIGHTS
P 20 LED BACKUP | AUXILIARY LIGHTS
P 22 LED LICENSE | UTILITY LIGHTS
P 24 LED AUXILIARY | INTERIOR LIGHTS
P 28 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
P 37 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
P 46 LED PEDESTAL MOUNT PARK | TURN LIGHTS
P 48 LED CAB MARKER LIGHTS
P 51 CONNECTORS & MOUNTING ACCESSORIES
P 54 LED ELECTRONIC FLASHERS
P 56 LED REPLACEMENT BULBS
P 60 DISPLAY & SALES AIDS
P 63 INDEX
Be Visible. Stay Safe. ®
4 LED PROJECTION DRIVING | WORK LIGHTS
HeavyDutyLighting.com
5LED PROJECTION DRIVING | WORK LIGHTS
FLOOD LIGHT: HD50014-3WFL
SPOT LIGHT: HD50014-3SP
FLOOD LIGHT: HD46516-3WFL
SPOT LIGHT: HD46516-3SP
FLOOD LIGHT: HD46008-3WFL
SPOT LIGHT: HD46008-3SP
HD46206-3 6 LED
8 LED
8 LED
9 LED
HIGH OUTPUT RECTANGULAR WORK LIGHT
HD46208-3 HIGH OUTPUT RECTANGULAR WORK LIGHT
HD46308-3 HIGH OUTPUT RECTANGULAR WORK LIGHT
HD46209-3 HIGH OUTPUT RECTANGULAR WORK LIGHT
LED: 3W High Output
COLOR: White
DIMENSIONS: 5.91” x 3.94” x 2.32”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.24A, 24V-0.50A
LUMEN: 1350
IP RATING: 67
SHOCK: 20G
• Super Bright High Power LEDs• Stainless Steel Mounting Bracket• Powder Coated Pinned Cables• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens• 12" Shielded Lead • Working Temp: -40° to +50°C • Color Temp: 58800-6000KG • Moisture & Corrosion Resistant
• Super Bright High Power LED's• 18" Wire Lead from Lamp with Pinned Ends
• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
LED: 3W High Output
COLOR: White
DIMENSIONS: 6.14” x 3.66” x 3.35”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.77A, 28V-0.74A
LUMEN: 1800
IP RATING: 67
SHOCK: 20G
LED: 3W High Output
COLOR: White
DIMENSIONS: 6.14” x 3.66” x 3.35”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.77A, 28V-0.74A
LUMEN: 1800
IP RATING: 67
SHOCK: 20G
• Super Bright High Power LED's• 18" Wire Lead from Lamp with Pinned Ends
• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens• Unique Swivel Base
LED: 3W High Output
COLOR: White
DIMENSIONS: 5.91” x 3.94” x 2.32”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.77A, 28V-0.74
LUMEN: 2025
IP RATING: 67
SHOCK: 20G
• Super Bright High Power LED's• 18" Wire Lead from Lamp with Pinned Ends
• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
HD46206-3WFL
HD46208-3WFL
HD46308-3WFL
HD46209-3WFL
HD46206-3SP
HD46208-3SP
HD46308-3SP
HD46209-3SP
HD46008-3
HD46516-3
HD50014-3
• Working Temp: -40°C TO +50°C• Color Temp: 5800-6000KG• Super Bright High Power LED’s• Stainless Steel Mounting Bracket• Powder Coated Cast Aluminum • Sealed Coated Electronics• Impact Resistant Polycarbonate Lens• 12” Shielded Lead
• Working Temp: -40°C TO +50°C• Color Temp: 5800-6000KG• Super Bright High Power LED’s• Stainless Steel Mounting Bracket• Powder Coated Cast Aluminum • Sealed Coated Electronics• Impact Resistant Polycarbonate Lens• 12” Shielded Lead
• Working Temp: -40°C TO +50°C• Color Temp: 5800-6000KG• Super Bright High Power LED’s• Stainless Steel Mounting Bracket• 12” Shielded Pinned Cables• Powder Coated Cast Aluminum• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
8 LED
16 LED
14 LED
HIGH OUTPUT OVAL WORK LIGHTS
HIGH OUTPUT SQUARE WORK LIGHTS
HIGH OUTPUT ROUND WORK LIGHTS
LED: 3W High Output
COLOR: White
DIMENSIONS: 5.84” x 3.62” x 2.56”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.77A, 28V-0.74A
LUMEN: 1800
IP RATING: 67
SHOCK: 20G
LED: 3W High Output
COLOR: White
DIMENSIONS: 4.65” x 6.0” x 2.91”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-2.40A, 28V-0.90A
LUMEN: 3520
IP RATING: 67
SHOCK: 20g
LED: 3W High Output
COLOR: White
DIMENSIONS: 5.04” x 6.1” x 2.91”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-2.30A, 28V-0.99A
LUMEN: 3080
IP RATING: 67
SHOCK: 20G
Be Visible. Stay Safe. ®
6 LED PROJECTION DRIVING | WORK LIGHTS
POWERED OFF POWERED ON
HeavyDutyLighting.com
7LED PROJECTION DRIVING | WORK LIGHTS
FLOOD WITH CIGARETTE LIGHTER SWITCH:
HD46006-3WFLMAGS
FLOOD WITH TRAILER PLUG CONNECTOR: HD46006-3WFLMAGP
FLOOD WITH CIGARETTE LIGHTER SWITCH:
HD42505-3WFLMAGS
FLOOD WITH TRAILER PLUG CONNECTOR: HD42505-3WFLMAGP
SIDE VIEW
SIDE VIEW
SIDE VIEW
FRONT VIEW
FRONT VIEW
FRONT VIEW
SIDE VIEWFRONT VIEW
HD52609-3WFL 9 LED
9 LED
54 LED
6 LED
HIGH OUTPUT SQUARE WORK LIGHT
HD55009-3WFL HIGH OUTPUT ROUND WORK LIGHTS
HD47554WL ROUND WORK LIGHT | RUBBER HOUSING
HD47506WFL HIGH OUTPUT ROUND WORK LIGHT | RUBBER HOUSING
LED: 3W High Output
COLOR: White
DIMENSIONS: 5.31” x 6.69” x 1.77”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.77A, 28V-0.74A
LUMEN: 2025
IP RATING: 67
SHOCK: 20G
• Super Bright High Power LEDs• Base Or Side Mounting Options• 12” Shielded Cable• Powder Coated Cast Aluminium Body• Stainless Steel Mounting Bracket• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens• Two Mounting Choices Included (Base or Side)
• Super Bright High Power LEDs• Base Or Side Mounting Options• 12” Shielded Cable• Powder Coated Cast Aluminium Body• Stainless Steel Mounting Bracket• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens• Two Mounting Choices Included (Base or Side)
LED: 3W High Output
COLOR: White
DIMENSIONS: 5.5” x 6.61” x 2.05”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.77A, 28V-0.74A
LUMEN: 2025
IP RATING: 67
SHOCK: 20G
LED: Super Duty
COLOR: White
DIMENSIONS: 5.04” x 6.42” x 3.15”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.35A, 28V-0.17A
LUMEN: 400
IP RATING: 66
SHOCK: 20G
• High Impact Rubber Body (Reduces Vibration)
• Black (-) Ground - Red (+) Power• Stainless Mounting • Hardware Included• Sealed Coated Electronics• Moisture and Corrosion Resistant• 12” Shielded Cable
LED: 3W High Output
COLOR: White
DIMENSIONS: 5.04” x 6.42” x 3.15”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.10A, 28V-0.50A
LUMEN: 1350
IP RATING: 67
SHOCK: 20G
• High Impact Rubber Body (Reduces Vibration)
• Black (-) Ground - Red (+) Power• Stainless Mounting • Hardware Included• Sealed Coated Electronics• Moisture and Corrosion Resistant• 12” Shielded Cable
HD42505-3WFLMAG5 LED
6 LED
5 LED
6 LED
HIGH OUTPUT SQUARE MAGNETIC BASE WORK LIGHTS
HD46006-3WFLMAGHIGH OUTPUT ROUND MAGNETIC BASE WORK LIGHTS
HD42505-3WFLHIGH OUTPUT SQUARE SLIM LINE WORK LIGHT
HD46006-3WFLHIGH OUTPUT ROUND SLIM LINE WORK LIGHT
LED: 3W High Output
COLOR: White
DIMENSIONS: 4.33” x 5.75” x 1.61”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12v-0.90a, 28v-0.40a
LUMEN: 1050
IP RATING: 67
SHOCK: 20G
• Powder Coated Cast Aluminium Body• Sealed Coated Electronics• 29’ Shielded Lead with either Cigarette Lighter Switch or 4 Wire Trailer Plug Connector
• Impact Resistant Polycarbonate Lens
• Powder Coated Cast Aluminium Body• Sealed Coated Electronics• 29’ Shielded Lead with either Cigarette Lighter Switch or 4 Wire Trailer Plug Connector
• Impact Resistant Polycarbonate Lens
LED: 3W High Output
COLOR: White
DIMENSIONS: 4.57” x 5.75” x 1.69”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.24A, 24V-0.50A
LUMEN: 1350
IP RATING: 67
SHOCK: 20G
LED: 3W High Output
COLOR: White
DIMENSIONS: 4.33” x 5.35” x 1.61”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12v-0.90a, 28v-0.40a
LUMEN: 1050
IP RATING: 67
SHOCK: 20G
• 2 Mounting Choices Included (Base or Side)
• 12” Shielded Pinned Cables• Powder Coated Cast Aluminium Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
LED: 3W High Output
COLOR: White
DIMENSIONS: 4.57” x 5.35” x 1.69”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.10A, 28V-0.50A
LUMEN: 1350
IP RATING: 67
SHOCK: 20g
• 2 Mounting Choices Included (Base or Side)
• 12” Shielded Pinned Cables• Powder Coated Cast Aluminium Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
Be Visible. Stay Safe. ®
8 LED PROJECTION DRIVING | WORK LIGHTS
HeavyDutyLighting.com
9LED PROJECTION DRIVING | WORK LIGHTS1.
78”
1.87
”
6.29” 2.48”
2.44”
7.68”7.93” 1.77”
0.24”
BLUE LED HD31703-5BFL
WHITE LED HD31703-5WFL
AMBER LED HD31703-3YFL
RED LED HD31703-3RFL
GREEN LED HD31703-3GFL
HD62006-3WSP
HD62006-3WFL
HD72006-3WSPFM
HD72006-3WFLFM
HD45006-1WFL 6 LED
6 LED
6 LED
6 LED
HIGH OUTPUT ROUND FLOOD LIGHT
HD45006-1WFL HIGH OUTPUT ROUND SPOT LIGHT
HD45006-3WFL HIGH OUTPUT ROUND FLOOD LIGHT
HD45006-3WSP HIGH OUTPUT ROUND FLOOD LIGHT
LED: 1W High Output SMD
COLOR: White
DIMENSIONS: 4.5” x 2.75” x 5.5”
VOLT RANGE: 10 – 80 VDC
AMP DRAW: 0.9A
LUMEN: 720
IP RATING: 67
SHOCK: 20G
• Cast Aluminum Body• Black Powder Coating• Poly Carbonate Lens• Mirrored Diode Reflector• Stainless Steel Mounting• Bracket• Reverse Polarity Protection• 12” Shielded Cable
• Cast Aluminum Body• Black Powder Coating• Polycarbonate Lens• Mirrored Diode Reflector• Stainless Steel Mounting Bracket• Reverse Polarity Protection• 12” Shielded Cable
LED: 1W High Output SMD
COLOR: White
DIMENSIONS: 4.5” x 2.75” x 5.5
VOLT RANGE: 10 – 80 VDC
AMP DRAW: 0.9A
LUMEN: 640
IP RATING: 67
SHOCK: 20G
LED: 3W High Output SMD
COLOR: White
DIMENSIONS: 4.5” x 2.75” x 5.5”
VOLT RANGE: 10 – 80 VDC
AMP DRAW: 0.17A - 1.13A
LUMEN: 1300
IP RATING: 67
SHOCK: 20G
• Cast Aluminum Body• Black Powder Coating• Polycarbonate Lens• Mirrored Diode Reflector• Stainless Steel Mounting Bracket• Reverse Polarity Protection• 12” Shielded Cable
LED: 3W High Output SMD
COLOR: White
DIMENSIONS: 4.5” x 2.75” x 5.5
VOLT RANGE: 10 – 80 VDC
AMP DRAW: 0.17A - 1.13A
LUMEN: 1200
IP RATING: 67
SHOCK: 20G
• Cast Aluminum Body• Black Powder Coating• Polycarbonate Lens• Mirrored Diode Reflector• Stainless Steel Mounting Bracket• Reverse Polarity Protection• 12” Shielded Cable
HD31703-53 LED
3 LED
6 LED
6 LED
HIGH OUTPUT SURFACE MOUNT WORK/CLEARANCE LIGHT
HD31703-3HIGH OUTPUT SURFACE MOUNT WORK/CLEARANCE LIGHT
HD62006-3WSLIM RECTANGULAR HIGH POWER WORK FLOOD LAMP
HD72006-3WFLUSH MOUNT SLIM RECTANGULAR HIGH POWER WORK FLOOD LAMP
LED: 5W High Output CREE
COLOR: White/Blue
DIMENSIONS: 3.03” x 1.73” x 0.86”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.3A, 24V-0.16A
LUMEN: 575
IP RATING: 69
SHOCK: 20G
• Super Bright High Power LEDs• Flat and Tube Mount Rubber Bases Included
• 18” Shielded Cable• Impact Resistant Polycarbonate Lens• Optional Angle Base Available HD31703-APAD
• Super Bright High Power LEDs• Flat and Tube Mount Rubber Bases Included
• 18” Shielded Cable• Impact Resistant Polycarbonate Lens• Optional Angle Base Available HD31703-APAD
LED: 3W High Output CREE
COLOR: Red/Green/Amber
DIMENSIONS: 3.03” x 1.73” x 0.86”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.3A, 24V-0.16A
LUMEN: 425
IP RATING: 69
SHOCK: 20G
LED: 3W High Output
COLOR: White
DIMENSIONS: 6.29" x 1.87" x 2.48"
VOLT RANGE: 10 - 30 VDC
AMP DRAW: 12V-1.4A, 24V-0.7A
LUMEN: 1440
IP RATING: 67, 69K
SHOCK: 20G
• Super Bright High Power LEDs• 18" Shielded Lead With Deutsch Connector
• Powder Coated Cast Aluminum Body• Stainless Steel Mounting Hardware Included
• Sealed Coated Electronics • Impact Resistant Polycarbonate Lens
LED: 3W High Output
COLOR: White
DIMENSIONS: 7.68" x 2.44" x 1.77"
VOLT RANGE: 10 - 30 VDC
AMP DRAW: 12V-1.4A, 24V-0.7A
LUMEN: 1440
IP RATING: 67, 69K
SHOCK: 20G
• Super Bright High Power LEDs• 18" Shielded Lead With Deutsch Connector
• Powder Coated Cast Aluminum Body• Sealed Coated Electronics • Impact Resistant Polycarbonate Lens
• Optional Angle Base Available HD72006-APAD
HeavyDutyLighting.com
11LED AUXILIARY | INTERIOR LIGHTS
90 47
106
90 47
106
Be Visible. Stay Safe. ®
10 LED PROJECTION DRIVING | WORK LIGHTS
FLOOD LIGHT HD35006-3WFL
FLOOD LIGHT HD26004-3WFL
SPOT LIGHT HD32006-3SP
HD32000-BF HD32000-AF HD32000-YF
SPOT LIGHT HD26004-3SP
FLOOD LIGHT HD32006-3WFL
SPOT LIGHT HD35006-3SP
HD35003-33 LED
3 LED
6 LED
4 LED
HIGH OUTPUT MINI ROUND WORK LIGHT
HD35003-3YHIGH OUTPUT MINI ROUND WORK LIGHT
HD33006-3SP
HD42504WHP
HD42504YHP
HIGH OUTPUT MINI ROUND SPOT LIGHT
HD42504HIGH OUTPUT DRIVING/FOG LIGHT KIT
LED: 3W High Output
COLOR: White
DIMENSIONS: 3.54 x 4.17" x 1.85"
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-.90A, 28V-0.40A
LUMEN: 600
IP RATING: 67
SHOCK: 20G
• Powder Coated Cast Aluminum Housing• Impact Resistant Polycarbonate Lens• 12" Shielded Cable• Stainless Steel Mounting Hardware• Sealed Coated Electronics
• Powder Coated Cast Aluminum Housing• Impact Resistant Polycarbonate Lens• 12" Shielded Cable• Stainless Steel Mounting Hardware• Sealed Coated Electronics
LED: 3W High Output
COLOR: Amber
DIMENSIONS: 3.54 x 4.17" x 1.85"
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-.90A, 28V-0.40A
LUMEN: 460
IP RATING: 67
SHOCK: 20G
LED: 3W High Output
COLOR: White
DIMENSIONS: 3.31” x 4.45” x 3.84”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.24A, 28V-0.50A
LUMEN: 1350
IP RATING: 67
SHOCK: 20G
• Super Bright High Power LEDs• 12” Shielded Pinned Cables• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
LED: 1W Super Duty
COLOR: White/Amber
DIMENSIONS: 4.33” x 1.38” x 1.73”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 300mA
LUMEN: 425
IP RATING: 67
SHOCK: 20G
• Super Bright High Power LEDs• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
KIT INCLUDES:• 2 Lamps with Stainless Steel • Mounting Brackets & Hardware• Rocker Switch, Wire Harness, and Clips
HD26004-3 4 LED
6 LED
6 LED
HIGH OUTPUT MINI SQUARE WORK LIGHTS
HD32006 HIGH OUTPUT MINI SQUARE WORK LIGHT
HD35006-3 HIGH OUTPUT MINI FLUSH MOUNT WORK LIGHT
HD32000 SNAP-ON POLYCARBONATE LENS FILTER - DESIGNED TO FIT HD32006 SERIES LIGHTS
LED: 3W High Output
COLOR: White
DIMENSIONS: 2.6” x 3.66” x 2.6”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.74A, 28V-0.33A
LUMEN: 900
IP RATING: 67
SHOCK: 20G
• Super Bright High Power LEDs• Stainless Steel Mounting Bracket• 12” Shielded Pinned Cables• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
LED: 3W High Output CREE
COLOR: White
DIMENSIONS: 4.8” x 3.6” x 3.1”
VOLT RANGE: 10-30V DC
AMP DRAW: 12V-1.28A, 24V-0.61A
LUMEN: 1150
IP RATING: 68
SHOCK: 20G
• Super Bright High Power LEDs• Stainless Steel Pedestal• 12” Shielded Cable with Deutsch Connector
• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens• 2 Mounting Choices Included: Flush Mount Front Bezel and Stainless Steel Pedestal
LED: 3W High Output CREE
COLOR: White
DIMENSIONS: 3.23” x 3.15” x 3.23”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-1.28A, 24V-0.61A
LUMEN: 1150
IP RATING: 68
SHOCK: 20G
• Super Bright High Power LEDs• 12” Shielded Cable with Deutsch Connector
• Powder Coated Cast Aluminum Body• Sealed Coated Electronics• Impact Resistant Polycarbonate Lens
FLOOD LIGHT HD35003-3YWFL
SIDE VIEW
SPOT LIGHT HD35003-3YSP
FRONT VIEW
SPOT LIGHT HD35003-3SP
FLOOD LIGHT HD35003-3WFL
HeavyDutyLighting.com
13LED STOP | TAIL | TURN & PARK TURN LIGHTS
Be Visible. Stay Safe. ®
12 LED STOP | TAIL | TURN & PARK TURN LIGHTS
FRONT VIEW
BACK VIEW
HD40032R32 LED
32 LED
7 LED
7 LED
4" ROUND STOP/TAIL/TURN LIGHT
HD40032Y4" ROUND PARK/TURN LIGHT
HD40007RSD4" ROUND STOP/TAIL/TURN LIGHT
HD40007YSD4" ROUND PARK/TURN LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 4.06” x 2.01"
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 145mATAIL: 20mA
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL3 Connector
OPTIONAL ACCESSORIES• HD00030, HD00031, HD40095G, HD40096PC, HD40099SS
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL3 Connector
OPTIONAL ACCESSORIES• HD00030, HD00031, HD40095G, HD40096PC, HD40099SS
LED: 5MM
COLOR: Amber
DIMENSIONS: 4.06” x 2.01"
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 145mATAIL: 20mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 4.29” x 1.64"
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 150mATAIL: 15mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Conformally Coated Circuit Board• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD40095G• Chrome Grommet Cover HD40096PC• Security Flange HD40099SS• Connectors HD00030, HD00031
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.29” x 1.64"
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 140mATAIL: 14mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Conformally Coated Circuit Board• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD40095G• Chrome Grommet Cover HD40096PC• Security Flange HD40099SS• Connectors HD00030, HD00031
HD40040R 40 LED
40 LED
40 LED
40 LED
4” ROUND STOP | TAIL | TURN LIGHT
HD40040Y 4” ROUND PARK | TURN LIGHT
HD40040RC 4” ROUND CLEAR LENS STOP | TAIL | TURN LIGHT
HD40040YC 4” ROUND CLEAR LENS PARK | TURN LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 4.29” x 1.38”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 270mATAIL: 30mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Epoxy Encapsulated Electronics
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030,HD00031
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Epoxy Encapsulated Electronics
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, #HD00031
LED: 5MM
COLOR: Amber
DIMENSIONS: 4.29” X 1.38”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 240mASTOP/TAIL: 20mA
LED: 5MM
COLOR: Red
DIMENSIONS: 4.29” x 1.38”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 270mATAIL: 30mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Epoxy Encapsulated Electronics
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
LED: 5MM
COLOR: Amber
DIMENSIONS: 4.29” x 1.38”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 240mASTOP/TAIL: 20mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Epoxy Encapsulated Electronics
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
HeavyDutyLighting.com
15LED STOP | TAIL | TURN & PARK TURN LIGHTS
Be Visible. Stay Safe. ®
14 LED STOP | TAIL | TURN & PARK TURN LIGHTS
HD60010RSD10 LED
10 LED
13 LED
27 LED
6” OVAL STOP | TAIL | TURN LIGHT
HD60010YSD6” OVAL PARK | TURN LIGHT
HD60013RCSDM6” OVAL CLEAR LENS STOP | TAIL | TURN LIGHT
HD60027YCSDM6” OVAL CLEAR LENS PARK | TURN LIGHT
LED: Super Duty
COLOR: Red
DIMENSIONS: 6.5” x 2.3” x 1.57”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 100mA TAIL: 10mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Conformally Coated Circuit Board• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover• HD60096PC, HD60097PC• Connectors HD00030, HD00031
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Conformally Coated Circuit Board• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• CHROME Grommet HD60096PC, HD60097PC
• Connectors HD00030, HD00031
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.5” x 2.3” x 1.57”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 175mA TAIL: 17mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 6.5” x 2.28” x 2.2”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 200mA TAIL: 20mA
• Convex Dot Lens Design with Mirror Reflector
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC, HD60097PC
• Connectors HD00030, HD00031
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.5” x 2.28” x 2.2”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 320mA TAIL: 20mA
• Convex Dot Lens Design with Mirror Reflector
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC, HD60097PC
• Connectors HD00030, HD00031
HD40012RSD 12 LED
12 LED
12 LED
12 LED
4” ROUND STOP | TAIL | TURN LIGHT
HD40012YSD 4” ROUND PARK | TURN LIGHT
HD40012RCSDM 4” ROUND CLEAR LENS STOP | TAIL | TURN LIGHT
HD40012YCSDM 4” ROUND CLEAR LENS PARK | TURN LIGHT
LED: Super Duty
COLOR: Red
DIMENSIONS: 4.29” x 1.64”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 140mA TAIL: 11mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Conformally Coated Circuit Board
OPTIONAL ACCESSORIES• Grommet HD40095G• Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Conformally Coated Circuit Board
OPTIONAL ACCESSORIES• Grommet #HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.29” x 1.64”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 129mA STOP/TAIL: 19mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 4.29” x 2.09”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 140mA TAIL: 11mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Epoxy Encapsulated Electronics
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS• Connectors HD00030, HD00031
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.29” x 2.09”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 129mA STOP/TAIL: 19mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Epoxy Encapsulated Electronics
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
Be Visible. Stay Safe. ®
16 LED STOP | TAIL | TURN & PARK TURN LIGHTS
HeavyDutyLighting.com
17LED STOP | TAIL | TURN & PARK TURN LIGHTS
HD60060R 60 LED
60 LED
15 LED
21 LED
6” OVAL STOP | TAIL | TURN LIGHT
HD60060Y 6” OVAL PARK | TURN LIGHT
HD60015RSD 6” OVAL STOP | TAIL | TURN LIGHT
HD60021YSD 6” OVAL PARK | TURN LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 6.5” x 2.28” x 1.73”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 720mA TAIL: 40mA
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC, HD60097PC
• Connectors HD00030, HD00031
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover• HD60096PC, HD60097PC• Connectors HD00030, HD00031
LED: 5MM
COLOR: Amber
DIMENSIONS: 6.5” x 2.28” x 1.73”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 620mA TAIL: 20mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 6.5” x 2.3” x 1.57”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 200mA TAIL: 10mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC• Connectors HD00030, HD00031
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.5” x 2.3” x 1.57”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 186mA TAIL: 20mA
• Convex Dot Lens Design for Superior Optics & Light Dispersion
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC
• Connectors HD00030, HD00031
HD60042R42 LED
42 LED
60 LED
60 LED
6” OVAL STOP | TAIL | TURN LIGHT
HD60042Y6” OVAL PARK | TURN LIGHT
HD50060R5” RECTANGULAR STOP | TAIL | TURN LIGHT
HD50060Y5” RECTANGULAR PARK | TURN LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 6.16" x 1.99" x 1.35"
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 220mATAIL: 30mA
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC, HD60097PC
• Connectors HD00030, HD00031
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC, HD60097PC
• Connectors HD00030, HD00031
LED: 5MM
COLOR: Amber
DIMENSIONS: 6.16" x 1.99" x 1.35"
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 220mATAIL: 30mA
LED: 5MM
COLOR: Red
DIMENSIONS: 5.28” x 3.43” x 1.97”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 550mA TAIL: 60mA
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD50095G • Connectors HD00030,HD00031
LED: 5MM
COLOR: Amber
DIMENSIONS: 5.28” x 3.43” x 1.97”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 530mA TAIL: 50mA
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD50095G • Connectors HD00030, HD00031
HeavyDutyLighting.com
19LED STOP | TAIL | TURN & PARK TURN LIGHTS
Be Visible. Stay Safe. ®
18 LED STOP | TAIL | TURN & PARK TURN LIGHTS
RED LENS HD17011RSD
CLEAR LENS HD17011RCSD
HD17011R11 LED
18 LED
31 LED
31 LED
17" SLIM OVAL RED W/CLEAR LENS STOP/TAIL/TURN LIGHT
HD60018YSD6” OVAL MID PARK | TURN
HD65031YSDPETERBILT® PARK TURN MARKER ASSEMBLY
HD65031YCSDPETERBILT® CLEAR LENS PARK TURN MARKER ASSEMBLY
LED: Super Duty
COLOR: Red
DIMENSIONS: 16.94” x 1.37” x 1.06”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 250mA TAIL: 15mA
• Convex Dot Lens • Polycarbonate Lens & Housing• Conformally Coated Electronics• Pre-Wired / No Connector Required
• Reflectorized Amber Lens
OPTIONAL ACCESSORIES• Grommet HD60095G• Chrome Grommet Cover HD60096PC• Connectors HD00030, HD00031
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.5” x 2.38” x 2.75”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 180mA MARKER: 20mA
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.59” x 3.12” x 5.12”
VOLT RANGE: 9.5-14 VDC
AMP DRAW PARK/TURN: 0.25A MARKER: 0.10A
• 21 Super Duty Forward Facing LEDs• 4 Super Duty Traffic Facing LEDs• 6 Super Duty Rear Facing LEDs• Polycarbonate Lens and Chromed ABS Housing
• Epoxy Encapsulated Electronics Sealed for Moisture Protection
• 3-Wire W/Bullet Terminals• Factory Color-coded Wires
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.59” x 3.12” x 5.12”
VOLT RANGE: 9.5-14 VDC
AMP DRAW PARK/TURN: 0.25A MARKER: 0.10A
• 21 Super Duty Forward Facing LEDs• 4 Super Duty Traffic Facing LEDs• 6 Super Duty Rear Facing LEDs• Polycarbonate Lens and Chromed ABS Housing
• Epoxy Encapsulated Electronics Sealed for Moisture Protection
• 3-Wire W/Bullet Terminals• Factory Color-coded Wires
HD57033RSDM 33 LED
39 LED
19 LED
31 LED
UNIVERSAL SQUARE COMBINATION BOX LIGHT
HD57039RSDM UNIVERSAL SQUARE COMBINATION BOX LIGHT
HD83019TR RECTANGULAR COMBINATION RIGHT TRAILER LIGHT
HD83031TR RECTANGULAR COMBINATION LEFT TRAILER LIGHT
LED: Super Duty
COLOR: Red/White
DIMENSIONS: 5.75” x 6.8” x 2.67”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW STOP/TURN: 330mA TAIL: 140mA
• 12 Super Duty STT LEDs• 21 5MM Backup LEDs• Red and Clear Polycarbonate Lens• ABS Housing• Mirror Reflective Diode Surround• Epoxy Encapsulated Electronics• 4-Wire/Blunt Cut Wires• 3 Mounting Studs
• 12 Super Duty STT LEDs• 21 5MM Backup LEDs• 6 Super Duty License LEDs• Red and Clear Polycarbonate Lens• ABS Housing• Mirror Reflective Diode Surround• Epoxy Encapsulated Electronics• 4-Wire/Blunt Cut Wires• 3 Mounting Studs
LED: Super Duty
COLOR: Red/White
DIMENSIONS: 5.75” x 6.8” x 2.67”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW STOP/TURN: 330mA TAIL: 140mA
LICENSE: 170mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 8.66” x 3.15” x 2.25”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 360mA TAIL: 40mA
• 13 Super Duty STT LEDs• 6 Super Duty Side Marker LEDs• Epoxy Encapsulated Electronics• Pre-wired No Connector Required• Mounting Hardware Included
LED: Super Duty
COLOR: Red/White
DIMENSIONS: 8.66” x 3.15” x 2.25”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 360mA TAIL: 40mA
LICENSE: 240mA
• 13 Super Duty STT LEDs• 6 Super Duty Side Marker LEDs• 12 SUPER DUTY License LEDs• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Mounting Hardware Included
Be Visible. Stay Safe. ® HeavyDutyLighting.com
20 21LED BACK UP | AUXILIARY LIGHTSLED BACK UP | AUXILIARY LIGHTS
SHOWN WITH OPTIONAL GROMMET
SHOWN WITH OPTIONAL GROMMET
10 LED6” OVAL BACKUP LIGHT
6” OVAL BACKUP LIGHT 27 LED
4 LED6” OVAL CLEAR LENS UTILITY LIGHT
2.5” FLUSH MOUNT UTILITY LIGHT 3 LED HD25003WSD
HD60804WCSD
HD60027WSD
HD60010WSD
LED: Super Duty
COLOR: White
DIMENSIONS: 2.52” X 0.71”
VOLT RANGE: 9.9-13.8 VDC
AMP DRAW: 68mA
LED: Super Duty
COLOR: White
DIMENSIONS: 6.63” X 2.13” X 0.7”
VOLT RANGE: 9.9-13.8 VDC
AMP DRAW: 50mA
LED: Super Duty
COLOR: White
DIMENSIONS: 6.5” x 2.28” x 2.2”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 360mA
LED: Super Duty
COLOR: White
DIMENSIONS: 6.5” x 2.3” x 1.57”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 220mA
• Universal Design for Use as Auxiliary Or Utility Light
• Polycarbonate Lens and Housing• Conformally Coated Circuit Board• Requires Standard PL2 Connector
OPTIONAL ACCESSORIES• Grommet HD25095G Or HD25195G
• Bezel HD25096PC• Connectors HD00020 Or HD00021
• Epoxy Encapsulated Electronics • Universal Design for Use as Auxiliary Or Utility Light
• Polycarbonate Lens and Housing• Conformally Coated Circuit Board• Requires Standard PL2 Connector
OPTIONAL ACCESSORIES• Grommet HD25095G Or HD25195G• Bezel HD25096PC• Connectors HD00020 Or HD00021
OPTIONAL ACCESSORIES• Grommet #HD60095G • Chrome Grommet Cover HD60096PC• Connectors #HD00030, HD00031
OPTIONAL ACCESSORIES• Grommet HD60095G • Chrome Grommet Cover HD60096PC• Connectors HD00030, HD00031
4” ROUND BACK UP LIGHT
4” ROUND BACK UP LIGHT
4” ROUND BACK UP LIGHT
4” ROUND BACK UP LIGHT
HD40056W
HD40040W
HD40012WSD
HD40007WSD
56 LED
40 LED
12 LED
7 LED
• Convex Dot Lens Design for Superior Optics and Light Dispersion
• Conformally Coated Circuit Board• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
• Convex Dot Lens Design for Superior Optics and Light Dispersion
• Conformally Coated Circuit Board• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Standard PL3 Connector
OPTIONAL ACCESSORIES• Grommet HD40095G • Chrome Grommet Cover HD40096PC• Security Flange HD40099SS • Connectors HD00030, HD00031
LED: Super Duty
COLOR: White
DIMENSIONS: 4.29” x 1.64”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 280mA
LED: Super Duty
COLOR: White
DIMENSIONS: 4.29” x 2.09”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 330mA
LED: 5MM
COLOR: White
DIMENSIONS: 4.29” x 2.09”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 330mA
LED: 5MM
COLOR: White
DIMENSIONS: 4.24” x 1.87”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 280mA
Be Visible. Stay Safe. ® HeavyDutyLighting.com
22 LED LICENSE/UTILITY LIGHTS 23LED LICENSE/UTILITY LIGHTS
* BASE NOT INCLUDED
* BASE NOT INCLUDED
WHITE BODY HD63018SMDW-W
BLACK BODY HD63018SMDW-B
HD25103WSD HD40212BL3 LED 12 LED
8 LED 12 LED
12 LED 4 LED
18 LED 2 LED
2.5” RECTANGULAR UTILITY LIGHT ABS LICENSE LIGHT
HD25108W HD40212PC2.5" RECTANGULAR UTILITY LIGHT ABS LICENSE LIGHT
HD40112W HD30004BL4" RECTANGULAR UTILITY LIGHT ABS LICENSE LIGHT
HD63018SMDW HD21002SMDWCTRAILER/RV ANGLED PORCH LIGHT MINI OVAL FLUSH MOUNT UTILITY LIGHT
LED: Super Duty
COLOR: White
DIMENSIONS: 2.52” x 1.22” x 0.83”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW: 45mA
LED: 5MM
COLOR: White
DIMENSIONS: 4.1” x 1.89” x 2.13”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW: 160mA
OPTIONAL ACCESSORIES• Chrome Mounting Base HD25000PC
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required
OPTIONAL ACCESSORIES• Chrome Mounting Base HD25109PC• Black Mounting Base HD25109BP
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required
LED: 5MM
COLOR: White
DIMENSIONS: 2.52” x 1.22” x 0.83”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW: 60mA
LED: 5MM
COLOR: White
DIMENSIONS: 4.1” x 1.89” x 2.13”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW: 160mA
LED: 5MM
COLOR: White
DIMENSIONS: 3.74” x 1.22” x 0.83”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 190mA
LED: Super Duty
COLOR: White
DIMENSIONS: 3.0” x 1.18” x 1.65”
VOLT RANGE: 10 - 30 VDC
AMP DRAW: 50mA
OPTIONAL ACCESSORIES• Chrome Mounting Base HD40113PC• Black Mounting Base HD40113BL
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required
LED: 5050 SMD
COLOR: White
DIMENSIONS: 5.96” x 3.44” x 1.96”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 360mA
LUMEN: 300
IP RATING: 64
LED: 5050 SMD
COLOR: White
DIMENSIONS: 1.95” x 1.1” x 0.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Removable Clear Opaque Lens• Plastic Body / Downward Angle• Hidden Mounting Holes Beneath Removable Light Lens
• Designed to Match Incandescent OEM Fixtures for Easy Replacement
• Sealed Circuit Board for Excellent Moisture Resistance
• Available with Black or White Body
• Universal Design for Use as Auxiliary or Utility Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Meets P2 and PC DOT FMVSS 108/SAE Requirements
• Hard Wired (2 Wire) with Bullet Terminal Connectors
• Super Bright 2 SMD
HeavyDutyLighting.com
25LED AUXILIARY | INTERIOR LIGHTS
Be Visible. Stay Safe. ®
24 LED AUXILIARY | INTERIOR LIGHTS
FRONT VIEW
SIDE VIEW
18” LOW PROFILE INTERIOR LIGHT
15” LOW PROFILE INTERIOR LIGHT
11” LOW PROFILE INTERIOR LIGHT HD57011WSD
HD57015WSD
HD57018WSD138 LED
108 LED
72 LED
HD57007WSD42 LED7” LOW PROFILE INTERIOR LIGHT
LED: Super Duty
COLOR: White
DIMENSIONS: 18” x 5.71” x 0.47”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.84A, 24v-0.40A
LUMEN: 730
LED: Super Duty
COLOR: White
DIMENSIONS: 15” x 5.71” x 0.47”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.84A, 24v-0.40A
LUMEN: 570
LED: Super Duty
COLOR: White
DIMENSIONS: 10.47” x 5.71” x 0.47”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.70A, 24v-0.34A
LUMEN: 400
LED: Super Duty
COLOR: White
DIMENSIONS: 7.01” x 5.71” x 0.47”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.43A, 24v-0.21A
LUMEN: 230
• Equipped with ON/OFF Switch• MS Frosted Lens• Aluminum ABS Body• Sealed Moisture Resistant Electronics• Low Profile
KIT INCLUDES• Mounting Screws, 36” 20 AWG Blunt Cut Wire
• Equipped with ON/OFF Switch• MS Frosted Lens• Aluminum ABS Body• Sealed Moisture Resistant Electronics• Low Profile
KIT INCLUDES• Mounting Screws, 36” 20 AWG Blunt Cut Wire
• Equipped with ON/OFF Switch• MS Frosted Lens• Aluminum ABS Body• Sealed Moisture Resistant Electronics• Low Profile
KIT INCLUDES• Mounting Screws, 36” 20 AWG Blunt Cut Wire
• Equipped with ON/OFF Switch• MS Frosted Lens• Aluminum ABS Body• Sealed Moisture Resistant Electronics• Low Profile
KIT INCLUDES• Mounting Screws, 36” 20 AWG Blunt Cut Wire
HD34003WCSMD 3 LED
3 LED
108 LED
138 LED
MINI ROUND FLUSH MOUNT UTILITY LIGHT
HD34103WCSMD MINI ROUND FLUSH MOUNT UTILITY LIGHT
HD35015WSD 15" LOW PROFILE INTERIOR LIGHT
HD35018WSD 18" LOW PROFILE INTERIOR LIGHT
LED: 3528 SMD
COLOR: White
DIMENSIONS: 1.95” X 1.1” X 0.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Universal Design for Use as Auxiliary or Utility Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Meets P2 and PC DOT FMVSS 108/SAE Requirements
• Hard Wired (2 Wire) with Bullet Terminal Connectors
• Super Bright 3 SMD
• Super Bright 3 SMD• Universal Design for Use as Auxiliary or ID Light
• Compact Size for Easy Installation• Flush Mount 3/4" Hole with Included Grommet
• Grommet Design Includes "Built in Visor"
• 6" Sleeved Wires with Bullet Terminals• SAE P2 PC DOT
LED: 2835
COLOR: White
DIMENSIONS: 1.09" x .7"
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
LED: Super Duty
COLOR: White
DIMENSIONS: 15” x 3.54” x 0.47”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.84A, 24v-040A
LUMEN: 570
• Equipped with On/Off Switch• MS Frosted Lens• Aluminum/ABS Body• Sealed Moisture Resistant Electronics• Low Profile• Surface Mount• Hardware Included
LED: Super Duty
COLOR: White
DIMENSIONS: 18” x 3.54” x 0.47”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.84A, 24v-040A
LUMEN: 730
• Equipped with On/Off Switch• MS Frosted Lens• Aluminum/ABS Body• Sealed Moisture Resistant Electronics• Low Profile• Surface Mount• Hardware Included
HeavyDutyLighting.com
27LED AUXILIARY | INTERIOR LIGHTS
Be Visible. Stay Safe. ®
26 LED AUXILIARY | INTERIOR LIGHTS
* EZ CONNECT TOGETHER
FOR ANY NEEDED LENGTH
* EZ CONNECT TOGETHER
FOR ANY NEEDED LENGTH
* EZ CONNECT TOGETHER
FOR ANY NEEDED LENGTH
* EZ CONNECT TOGETHER
FOR ANY NEEDED LENGTH
* EZ CONNECT TOGETHER
FOR ANY NEEDED LENGTH
CLEAR LENSCLEAR LENS
CLEAR LENS
CLEAR LENS
CLEAR LENS
PART: LENGTH: LED: AMP DRAW: LUMENS:
HD12018CW-DC 12” 18 310mA 134/305
HD18027CW-DC 18” 27 450mA 150/480
HD24036CW-DC 24” 36 550mA 171/640
HD36054CW-DC 36” 54 750mA 192/870
HD48072CW-DC 48” 72 920mA 209/990
HD60090CW-DC 60” 90 1440mA 243/1230
HD70009GSD9 LED
12 LED
24 LED
18-90 LED
7” EZ CONNECT AUXILIARY LIGHT
HD23012SMD-CW23” INTERIOR LIGHT
HD23024SMD-CW23” INTERIOR LIGHT
COOL WHITE SMD12 VOLT FLEXIBLE STRIP LIGHTING
LED: Super Duty
COLOR: Green
DIMENSIONS: 7.23” x 0.98” x 0.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
• Epoxy Potted Circuitry• Moisture & Corrosion Resistant• Surface Mount with 2 Screws Hardware Included
• Anti-vibration Gasket Included• Hardwired (2 Wire) 6” Length• Ez-connect Snap-together with Additional Ez Connect Lights
• Equipped with ON/OFF Switch• Clear Acrylic Lens• Reflective Diode Surround• Aluminum Body• Sealed Moisture Resistant
KIT INCLUDES• Mounting Screws,• 36” 20 AWG Blunt Cut Wire
LED: 5050 SMD
COLOR: Cool White
DIMENSIONS: 23.23” x 1.57” x 0.79”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.77A, 24V-0.40A
LED: 5050 SMD
COLOR: Cool White
DIMENSIONS: 23.23” x 1.57” x .79”
VOLT RANGE: 10-30 VDC
AMP DRAW: 12V-0.77A, 24V-0.37A
• Equipped with ON/OFF Switch• Clear Acrylic Lens• Reflective Diode Surround• Aluminum Body• Sealed Moisture Resistant
KIT INCLUDES• Mounting Screws,• 36” 20 AWG Blunt Cut Wire
• 3M 4229 Superior Bonding Tape• Available in Six Lengths• Adheres to a Variety of Surfaces• Moisture Proof Electronics• Packaged on Protective Reel • Shipped in Anti-static Bag
• Mounting Clamps and Screws Included
• 10” Shielded Power Cable • Equipped with Deutsch Connector DT04-2P
HD70009WSD 9 LED
9 LED
9 LED
9 LED
7” EASY CONNECT AUXILIARY LIGHT
HD70009RSD 7” EASY CONNECT AUXILIARY LIGHT
HD70009YSD 7” EASY CONNECT AUXILIARY LIGHT
HD70009BSD 7” EASY CONNECT AUXILIARY LIGHT
LED: Super Duty
COLOR: White
DIMENSIONS: 7.23” x 0.98” x 0.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
• Epoxy Potted Circuitry Moisture and Corrosion Resistant
• Surface Mount with 2 Screws Hardware Included
• Anti-vibration Gasket Included• Hardwired (2 Wire) 6” Length• Ez-connect Snap-together with Additional Ez Connect Lights
• Epoxy Potted Circuitry• Moisture & Corrosion Resistant• Surface Mount with 2 Screws Hardware Included
• Anti-vibration Gasket Included• Hardwired (2 Wire) 6” Length• Ez-connect Snap-together with Additional Ez Connect Lights
LED: Super Duty
COLOR: Red
DIMENSIONS: 7.23” x 0.98” x 0.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
LED: Super Duty
COLOR: Amber
DIMENSIONS: 7.23” x 0.98” x 0.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
• Epoxy Potted Circuitry• Moisture & Corrosion Resistant• Surface Mount with 2 Screws• Hardware Included• Anti-vibration Gasket Included• Hardwired (2 Wire) 6” Length• Ez-connect Snap-together with Additional Ez Connect Lights
LED: Super Duty
COLOR: Blue
DIMENSIONS: 7.23” x 0.98” x 0.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
• Epoxy Potted Circuitry• Moisture & Corrosion Resistant• Surface Mount with 2 Screws• Hardware Included• Anti-vibration Gasket Included• Hardwired (2 Wire) 6” Length• Ez-connect Snap-together with Additional Ez Connect Lights
HeavyDutyLighting.com
29LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
AMBER LENS HD34003-3YSMD
CLEAR LENS HD34003-3YCSMD
AMBER LENS HD34003YSMD
CLEAR LENS HD34003YCSMD
RED LENS HD34003RSMD
CLEAR LENS HD34003RCSMD
RED LENS HD34003-3RSMD
CLEAR LENS HD34003-3RCSMD
Be Visible. Stay Safe. ®
28 LED FLUSH MOUNT CLEARANCE LIGHT
FRONT VIEW
SIDE VIEW
HD34003R3 LED
3 LED
3 LED
3 LED
MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT
HD34003YMINI ROUND 2-WIRE CLEARANCE MARKER LIGHT
HD34003-3RMINI ROUND 3-WIRE CLEARANCE MARKER LIGHT
HD34003-3YMINI ROUND 3-WIRE CLEARANCE MARKER LIGHT
LED: 3528 SMD
COLOR: Red
DIMENSIONS: 1.09” x 0.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
LED: 3528 SMD
COLOR: Amber
DIMENSIONS: 1.09” x 0.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
LED: 3528 CREE SMD
COLOR: Red
DIMENSIONS: 1.09” x 0.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
LED: 3528 CREE SMD
COLOR: Amber
DIMENSIONS: 1.09” x 0.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
HD34103RSMD 3 LED
3 LED
3 LED
3 LED
MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT
HD34103RCSMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT
HD34103YMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT
HD34103YCSMD MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT
LED: 2835 SMD
COLOR: Red
DIMENSIONS: 1.09” x 0.7”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy Installation• Flush Mount 3/4" Hole with Included Grommet
• Grommet Design Includes "Built in Visor"
• 6" Sleeved Wires with Bullet Terminals• SAE P2 PC DOT
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy Installation• Flush Mount 3/4" Hole with Included Grommet
• Grommet Design Includes "Built in Visor"
• 6" Sleeved Wires with Bullet Terminals• SAE P2 PC DOT
LED: 2835 SMD
COLOR: Red
DIMENSIONS: 1.09” x 0.7”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
LED: 2835 SMD
COLOR: Amber
DIMENSIONS: 1.09” x 0.7”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy Installation• Flush Mount 3/4" Hole with Included Grommet
• Grommet Design Includes "Built in Visor"
• 6" Sleeved Wires with Bullet Terminals• SAE P2 PC DOT
LED: 2835 SMD
COLOR: Amber
DIMENSIONS: 1.09” x 0.7”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Super Bright 3 SMD• Universal Design for Use as Auxiliary/Utility Marker or ID Light
• Compact Size for Easy Installation• Flush Mount 3/4" Hole with Included Grommet
• Grommet Design Includes "Built in Visor"
• 6" Sleeved Wires with Bullet Terminals
• SAE P2 PC DOT
HeavyDutyLighting.com
31LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
AMBER LENS HD20003YSD
CLEAR LENS HD20003YCSD
RED LENS HD20003RSD
CLEAR LENS HD20003RCSD
Be Visible. Stay Safe. ®
30 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
RED LENS HD21002SMDR
CLEAR LENS HD21002SMDRC
AMBER LENS HD21002SMDY
CLEAR LENS HD21002SMDYC
CLEAR LENS
CLEAR LENS
HD20003R3 LED
3 LED
9 LED
9 LED
2” ROUND CLEARANCE MARKER LIGHT
HD20003Y2” ROUND CLEARANCE MARKER LIGHT
HD20009R2" ROUND RED CLEARANCE MARKER LIGHT
HD20009Y2" ROUND AMBER CLEARANCE MARKER LIGHT
LED: Super Duty
COLOR: Red
DIMENSIONS: 2.02” x 0.69”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 68mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
OPTIONAL ACCESSORIES• Grommet HD20095G• Chrome Bezel HD20096PC• Connectors HD00020, HD00021
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
OPTIONAL ACCESSORIES• Grommet HD20095G• Chrome Bezel HD20096PC• Connectors HD00020, HD00021
LED: Super Duty
COLOR: Amber
DIMENSIONS: 2.02” x 0.69”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 68mA
LED: 5MM
COLOR: Red
DIMENSIONS: 1.82 x .88"”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 60mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive• Grommet HD20095G• Chrome Bezel HD20096PC• Connectors HD00020, HD00021
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.05” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 60mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector
• Non Polarity Sensitive• Grommet HD20095G• Chrome Bezel HD20096PC• Connectors HD00020, HD00021
HD34003BCSMD 3 LED
2 LED
2 LED
2 LED
MINI ROUND 2-WIRE CLEARANCE MARKER LIGHT
HD21002SMDBC MINI OVAL CLEARANCE MARKER LIGHT
HD21002SMDR MINI OVAL CLEARANCE MARKER LIGHT
HD21002SMDY MINI OVAL CLEARANCE MARKER LIGHT
LED: 3528 SMD
COLOR: Blue
DIMENSIONS: 1.09” x 0.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Super Bright 2 SMD• Universal Design for Use as auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
• Super Bright 2 SMD• Universal Design for Use as auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
LED: 5050 SMD
COLOR: Blue
DIMENSIONS: 1.95” x 1.1” x 0.5”
VOLT RANGE: 7.7-14 VDC
AMP DRAW: 20mA
LED: 5050 SMD
COLOR: Red
DIMENSIONS: 1.95” x 1.1” x 0.5”
VOLT RANGE: 7.7-13.8 VDC
AMP DRAW: 20mA
• Super Bright 2 SMD• Universal Design for Use as auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
LED: 5050 SMD
COLOR: Amber
DIMENSIONS: 1.95” x 1.1” x 0.5”
VOLT RANGE: 7.7-13.8 VDC
AMP DRAW: 20mA
• Super Bright 2 SMD• Universal Design for Use as auxiliary/Utility Marker or ID Light
• Compact Size for Easy installation• Flush Mount 3/4” Hole with Included Grommet
• Hard Wired with Bullet Terminal Connectors
HeavyDutyLighting.com
33LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
AMBER LENS HD25013Y
CLEAR LENS HD25013YC
RED LENS HD25013R
CLEAR LENS HD25013RC
Be Visible. Stay Safe. ®
32 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
AMBER LENS HD20010Y
CLEAR LENS HD20010YC
RED LENS HD20010R
CLEAR LENS HD20010RC
RED LENS HD25003RSD
CLEAR LENS HD25003RCSD
AMBER LENS HD25003YSD
CLEAR LENS HD25003YCSD
HD25012R12 LED
12 LED
13 LED
13 LED
2.5" ROUND CLEARANCE MARKER LIGHT
HD25012Y2.5" ROUND CLEARANCE MARKER LIGHT
HD25013R2.5” ROUND CLEARANCE MARKER LIGHT
HD25013Y2.5” ROUND CLEARANCE MARKER LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 60mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive• Grommet HD60095G• Chrome Grommet Cover HD60096PC• Connectors HD00020, HD00021
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive• Grommet HD60095G• Chrome Grommet Cover HD60096PC
• Connectors HD00020, HD00021
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 60mA
LED: 5MM
COLOR: Red
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 125mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
• Industry Grommet HD25095G or HD25195G
• Chrome Bezel HD25096PC• Connectors HD00020, HD00021
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW 125mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
• Industry Grommet HD25095G or HD25195G
• Chrome Bezel HD25096PC• Connectors HD00020, HD00021
HD20010R 10 LED
10 LED
3 LED
3 LED
2” ROUND CLEARANCE MARKER LIGHT
HD20010Y 2” ROUND CLEARANCE MARKER LIGHT
HD25003R 2.5” ROUND CLEARANCE MARKER LIGHT
HD25003Y 2.5” ROUND CLEARANCE MARKER LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 2.05” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 100mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
• Industry Grommet HD20095G• Chrome Bezel D20096PC• Connectors HD00020, HD00021
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
• Industry Grommet HD20095G• Chrome Bezel HD20096PC• Connectors HD00020, HD00021
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.05” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 120mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 68mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
OPTIONAL ACCESSORIES• Chrome Bezel HD25096PC• Connectors HD00020, HD00021
LED: Super Duty
COLOR: Red
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 68mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• PC Lens and Housing• Conformally Coated Circuit Board• Requires Industry Standard PL2 Connector
OPTIONAL ACCESSORIES• Chrome Bezel HD25096PC• Connectors HD00020, HD00021
Be Visible. Stay Safe. ®
34 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
AMBER LENS HD20310Y
RED LENS HD20310R
CLEAR LENS HD20310YC
CLEAR LENS HD20310RC
HeavyDutyLighting.com
35LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
RED LENS HD25313R
CLEAR LENS HD25313RC
AMBER LENS HD25313Y
CLEAR LENS HD25313YC
HD20309R 9 LED
9 LED
10 LED
10 LED
2” BEEHIVE CLEARANCE MARKER LIGHTS
HD20309Y 2” BEEHIVE CLEARANCE MARKER LIGHTS
HD20310R 2” BEEHIVE CLEARANCE MARKER LIGHTS
HD20310Y 2” BEEHIVE CLEARANCE MARKER LIGHTS
LED: 5MM
COLOR: Red
DIMENSIONS: 2.05” x 1.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.05” x 1.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
LED: 5MM
COLOR: Red
DIMENSIONS: 2.05” x 1.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 100mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
OPTIONAL ACCESSORIES• Grommet HD25095G or HD25195G• Chrome Bezel HD25096PC• Connector HD00020, HD00021
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.05” x 1.81”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 100mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
OPTIONAL ACCESSORIES• Grommet HD25095G or HD25195G• Chrome Bezel HD25096PC• Connector HD00020, HD00021
HD25312R12 LED
12 LED
13 LED
13 LED
2" BEEHIVE CLEARANCE MARKER LIGHT
HD25312Y2" BEEHIVE CLEARANCE MARKER LIGHT
HD25313R2.5” BEEHIVE CLEARANCE MARKER LIGHTS
HD25313Y2.5" BEEHIVE CLEARANCE MARKER LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 2.52” x 2.48”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.52” x 2.48”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
LED: 5MM
COLOR: Red
DIMENSIONS: 2.52” x 2.48”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 120mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
OPTIONAL ACCESSORIES• Grommet HD25095G or HD25195G• Chrome Bezel HD25096PC• Connector HD00020, HD00021
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.52” x 2.48”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 120mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Coated Electronics• Ultrasonically Welded Lens to Body• Uses Industry Standard PL2 Connector • Non Polarity Sensitive
OPTIONAL ACCESSORIES• Grommet HD25095G or HD25195G• Chrome Bezel HD25096PC• Connector HD00020, HD00021
Be Visible. Stay Safe. ®
36 LED FLUSH MOUNT CLEARANCE MARKER LIGHTS
RED LENS HD20007SMDR
AMBER LENS HD20007SMDY
RED LENS HD250009SMDR
AMBER LENS HD25009SMDY
HeavyDutyLighting.com
37LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
RED LENS HD40810R
CLEAR LENS HD40810RC
AMBER LENS HD40810Y
CLEAR LENS HD40810YC
2.5” FLUSH MOUNT REFLEX LENS CLEARANCE MARKER LIGHT
2.5” FLUSH MOUNT REFLEX LENS CLEARANCE MARKER LIGHT
2” SURFACE MOUNT CLEARANCE MARKER LIGHT
2.5” SURFACE MOUNT CLEARANCE HD25009SMD
HD20007SMD
HD25113Y
HD25113R
9 LED
7 LED
13 LED
13 LED
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• Epoxy Encapsulated Electronics• Standard PL2 Connector
OPTIONAL ACCESSORIES• Grommet HD25095G or HD25295G• Connectors HD00020, HD00021• Chrome Bezel HD25096PC
• Reflectorized Acrylic Lens• Fits all Standard Mounting • Polycarbonate Housing• DOT/SAE J592E, JF94F
OPTIONAL ACCESSORIES• Grommet HD25095G• Connectors HD00020, HD00021
• Universal Design• Polycarbonate Lens and ABS Housing• Conformally Coated Circuit Board• Sealed for Moisture Protection• Snap Style Chrome Bezel Hides Screws (Included)
• 2 Wires with Bullet Terminals• DOT/P2, PC
• Universal Design• Polycarbonate Lens and ABS Housing• Conformally Coated Circuit Board• Sealed for Moisture Protection• Snap Style Chrome Bezel Hides Screws (Included)
• 2 Wires with Bullet Terminals• DOT/P2, PC
LED: 3528 SMD
COLOR: Red/Amber
DIMENSIONS: 3.53” x 0.74”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
LED: 3528 SMD
COLOR: Red/Amber
DIMENSIONS: 2.95” x 0.72”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 40mA
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 125mA
LED: 5MM
COLOR: Red
DIMENSIONS: 2.52” x 0.71”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 120mA
HD40810R10 LED
10 LED
10 LED
10 LED
4” DOUBLE BULL’S EYE CLEARANCE MARKER LIGHT
HD40810Y4” DOUBLE BULL’S EYE CLEARANCE MARKER LIGHT
HD40810R4" DOUBLE BULLS EYE CLEARANCE MARKER
HD40810Y4" DOUBLE BULLS EYE CLEARANCE MARKER
LED: 5MM
COLOR: Red
DIMENSIONS: 4.02” x 2.0” x 1.14”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW: 110mA
• Surface Mount, Screws not Included• Mounting Holes 3” on Center• Pre-wired and Ready for install
OPTIONAL ACCESSORIES• Chrome Metal Guard HD40811C
• Surface Mount, Screws not Included• Mounting Holes 3” on Center• Pre-wired and Ready for install
OPTIONAL ACCESSORIES• Chrome Metal Guard HD40811C
LED: 5MM
COLOR: Amber
DIMENSIONS: 4.02” x 2.0” x 1.14”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 110mA
LED: SMD
COLOR: Red
DIMENSIONS: 4.02" x 2.0" x 1.02"
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 70mA
• Universal Design for Use as Clearance –rker or ID Light
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Surface Mount• Screws Included• Mounting Hole Center to Center: 3"• Pre-wired and Ready for Install• Chrome Metal Guard HD40811C
LED: SMD
COLOR: Amber
DIMENSIONS: 4.02" x 2.0" x 1.02"
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 70mA
• Universal Design for Use as Clearance Marker or ID Light
• Polycarbonate Lens & Housing• Conformally Coated Electronics• Surface Mount• Screws Included
• Mounting Hole Center to Center: 3"• Pre-wired and Ready for Install• Chrome Metal Guard HD40811C
RED LENS HD40810RSMD
CLEAR LENS HD40810RCSMD
AMBER LENS HD40810YSMD
CLEAR LENS HD40810YCSMD
Be Visible. Stay Safe. ®
38 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
AMBER LENS HD26002YSD
CLEAR LENS HD26002YCSD
RED LENS HD26002RSD
CLEAR LENS HD26002RCSD
RED LENS HD37004SMDR
CLEAR LENS HD37004SMDRC
AMBER LENS HD37004SMDY
CLEAR LENS HD37004SMDYC
HeavyDutyLighting.com
39LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
CLEAR LENS HD25108RC
RED LENS HD25108R
CLEAR LENS HD25108YC
AMBER LENS HD25108Y
HD26002R 2 LED
2 LED
4 LED
4 LED
2.5” OVAL CLEARANCE MARKER LIGHT
HD26002Y 2.5” OVAL CLEARANCE MARKER LIGHT
HD37004SMDR 3.75” OVAL CLEARANCE MARKER LIGHT
HD37004SMDY 3.75” OVAL CLEARANCE MARKER LIGHT
LED: Super Duty
COLOR: Red
DIMENSIONS: 2.6” x 1.1” x 0.69”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 30mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• Polycarbonate Lens and ABS Housing• Conformally Coated Circuit Board Sealed for Moisture Protection
• 2 Wire with Bullet Terminals• DOT/P2, PC• Optional Accessories available on Page 44 & 45
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• Polycarbonate Lens and ABS Housing• Conformally Coated Circuit Board Sealed for Moisture Protection
• 2 Wire with Bullet Terminals• DOT/P2, PC• Optional Accessories available on Page 44 & 45
LED: Super Duty
COLOR: Red
DIMENSIONS: 2.6” x 1.1” x 0.69”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 30mA
LED: 3528 SMD
COLOR: Red
DIMENSIONS: 3.74” x 1.27” x 0.65”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 45mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• Polycarbonate Lens and ABS Housing• Conformally Coated Circuit Board Sealed for Moisture Protection
• Snap Style Chrome Bezel Hides Screws (Included)
• 2 Wire with Bullet Terminals• DOT/P2, PC
LED: 3528 SMD
COLOR: Amber
DIMENSIONS: 3.74” x 1.27” x 0.65”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 45mA
• Universal Design for Use as Clearance Marker, Side Marker or ID Light
• Polycarbonate Lens and ABS Housing• Conformally Coated Circuit Board Sealed for Moisture Protection
• Snap Style Chrome Bezel Hides Screws (Included)
• 2 Wire with Bullet Terminals• DOT/P2, PC
HD25108R8 LED
8 LED
3 LED
3 LED
2.5” RECTANGULAR CLEARANCE MARKER LIGHT
HD25108Y2.5” RECTANGULAR CLEARANCE MARKER
HD25103RSD2.5” RECTANGULAR CLEARANCE MARKER LIGHT
HD25103YSD2.5” RECTANGULAR CLEARANCE MARKER LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 2.52” x 1.22” x 0.83”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 100mA
• Base Not Included
OPTIONAL ACCESSORIES• Chromed ABS HD25109PC• Black ABS HD25109BP
• Base Not Included
OPTIONAL ACCESSORIES• Chromed ABS HD25109PC• Black ABS HD25109BP
LED: 5MM
COLOR: Amber
DIMENSIONS: 2.52” x 1.22” x 0.83”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW: 100mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 2.52” x 1.22” x 0.83”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 45mA
• Base Not Included
OPTIONAL ACCESSORIES• Chromed ABS HD25000PC• Connectors, HD00020, HD00021
LED: Super Duty
COLOR: Amber
DIMENSIONS: 2.52” x 1.22” x 0.83”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 45mA
• Base Not Included
OPTIONAL ACCESSORIES• Chromed ABS HD25000PC• Connectors, HD00020, HD00021
Be Visible. Stay Safe. ®
40 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
HeavyDutyLighting.com
41LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
CLEAR LENS HD40112YC
AMBER LENS HD40112Y
CLEAR LENS HD40112RC
RED LENS HD40112R
RED LENS HD60020R
AMBER LENS HD60020Y
RED LENS HD60010R-3
AMBER LENS HD60010Y-3
HD40112R 12 LED
12 LED
10 LED
20 LED
4” RECTANGULAR CLEARANCE MARKER LIGHT
HD40112Y 4” RECTANGULAR CLEARANCE MARKER LIGHT
HD60010 2” X 6” REFLEX AUXILIARY TURN 3 WIRE CLEARANCE MARKER LIGHT
HD60020 2” X 6” RECTANGULAR 2 WIRE CLEARANCE MARKER LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 3.74” x 1.22” x 0.83”
VOLT RANGE: 7.5 - 14 VDC
AMP DRAW: 150mA
• Base Not Included
OPTIONAL ACCESSORIES• Chromed ABS HD40113PC• Black ABS HD40113BP
• Base Not Included
OPTIONAL ACCESSORIES• Chromed ABS HD40113PC• Black ABS HD40113BP
LED: 5MM
COLOR: Amber
DIMENSIONS: 3.74” x 1.22” x 0.83”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 140mA
LED: 5MM
COLOR: Red/Amber
DIMENSIONS: 5.83” x 2.05” x 1.42”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: HIGH: 80mA LOW: 50mA
• Universal Design Polycarbonate Lens and ABS Housing
• Epoxy Encapsulated Electronics SeaLED against Moisture
• 3 Wire with Bullet Terminals• Mounting Holes: 4.75” on Center• DOT/P2, PC
LED: 5MM
COLOR: Red/Amber
DIMENSIONS: 5.98” x 2.11” x 1.26”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 95mA
• Universal Design Polycarbonate Lens and ABS Housing
• Epoxy Encapsulated Electronics Sealed against Moisture
• Mirror Style Chrome Reflector• 2 Wire with Bullet Terminals• Mounting Holes: 4.75” on Center• DOT/P2, PC
HD30106R6 LED
6 LED
24 LED
3 LED
3” RECTANGULAR CLEARANCE MARKER LIGHT
HD30106Y3” RECTANGULAR CLEARANCE MARKER LIGHT
HD25108R-3IDSS3 LIGHT STAINLESS STEEL ID BAR
HD34001R-3IDSS3 LIGHT STAINLESS STEEL ID BAR
LED: 5MM
COLOR: Red
DIMENSIONS: 3.15” x 1.0” x 1.06”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
• Pre-wired and Ready for install• Screws Included
• Pre-wired and Ready for install• Screws Included
LED: 5MM
COLOR: Amber
DIMENSIONS: 3.15” x 1.0” x 1.06”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 60mA
LED: 5MM
COLOR: Red
DIMENSIONS: 16.5” x 1.38” x 1.25”
VOLT RANGE: 7.5 – 14 VDC
AMP DRAW: 300mA
• Mounting Hole Center: 15.75” • Includes Connector• Includes Wiring Harness
LED: SMD
COLOR: Red
DIMENSIONS: 15.9” x 1.46” x 1.81”
VOLT RANGE: 7.5 – 14 VDC
AMP DRAW: 20mA
• Mounting Hole Center to Center: 15.75"• Prewired with Wiring Harness • Includes 3 each 3/4" Round Red Mini Clearance Marker Lights
HeavyDutyLighting.com
43LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
Be Visible. Stay Safe. ®
42 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
RED LENS HD60813R
CLEAR LENS HD60813RC
AMBER LENS HD60813Y
CLEAR LENS HD60813YC
CLEAR LENS 3 WIRE HD40106RC-3
CLEAR LENS 2 WIRE HD40106RC
CLEAR LENS 2 WIRE HD40106YC
CLEAR LENS 3 WIRE HD40106YC-3
AMBER LENS 3 WIRE HD40106Y-3
RED LENS 2 WIRE HD40106R
RED LENS 3 WIRE HD40106R-3
AMBER LENS 2 WIRE HD40106Y
CLEAR LENS HD60804YCSD
AMBER LENS HD60804YSD
RED LENS HD60804RSD
CLEAR LENS HD60804RCSD
HD60813R13 LED
13 LED
4 LED
4 LED
6” OVAL CLEARANCE MARKER LIGHT
HD60813Y6” OVAL CLEARANCE MARKER LIGHT
HD60804R6” OVAL CLEARANCE MARKER LIGHT
HD60804Y6” OVAL CLEARANCE MARKER LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 6.7” x 2.32” x 0.87”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 130mA
• Includes Chromed ABS Bezel• Base Gasket Included• Pre-wired with 2 Male Terminals• Mounting Holes 4” on Center
• Includes Chromed ABS Bezel• Base Gasket Included• Pre-wired with 2 Male Terminals• Mounting Holes 4” on Center
LED: 5MM
COLOR: Amber
DIMENSIONS: 6.7” x 2.32” x 0.87”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 130mA
LED: Super Duty
COLOR: Red
DIMENSIONS: 6.63” x 2.13” x 0.7”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 45mA
• Screws Hidden by Snap-style Chrome Bezel, Base Gasket Included
• Mounting Holes 4.75” on Center• Uses Standard 2 Pin Connector, Not Included
OPTIONAL ACCESSORIES• Available Connectors HD00020, HD00021
• Available Continuous Loom HD00020-67F, HD00021-67F, HD00022-67F
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.63” x 2.13” x 0.7”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 45mA
• Screws Hidden by Snap-style Chrome Bezel• Base Gasket Included• Mounting Holes 4.75” on Center• Uses Standard 2 Pin Connector, Not Included
OPTIONAL ACCESSORIES• Available Connectors HD00020, HD00021
• Available Continuous Loom HD00020-67F, HD00021-67F, HD00022-67F
HD40106R 6 LED
6 LED
6 LED
6 LED
4” SLIM LINE 2 WIRE CLEARANCE MARKER LIGHT
HD40106Y 4” SLIM LINE 2 WIRE CLEARANCE MARKER LIGHT
HD40106R 4” SLIM LINE 3 WIRE CLEARANCE MARKER LIGHT
HD40106Y 4” SLIM LINE 3 WIRE CLEARANCE MARKER LIGHT
LED: 5MM
COLOR: Red
DIMENSIONS: 3.86” x 0.71” x 0.95”
VOLT RANGE: 7.5–14 VDC
AMP DRAW: 50mA
• Mounting Holes 2.83” on Center• Rubber Base Gasket Included• Pre-wired with Terminals
OPTIONAL ACCESSORIES• 2-Wire Light Easy-install Loom HD00020-67F
• Mounting Holes 2.83” on Center• Rubber Base Gasket Included• Pre-wired with Terminals
OPTIONAL ACCESSORIES• 2-Wire Light Easy-install Loom HD00020-67F
LED: 5MM
COLOR: Amber
DIMENSIONS: 3.86” x 0.71” x 0.95”
VOLT RANGE: 7.5–14 VDC
AMP DRAW: 50mA
LED: 5MM
COLOR: Red
DIMENSIONS: 3.86” x 0.71” x 0.95”
VOLT RANGE: 7.5–14 VDC
AMP DRAW: HIGH: 70mA LOW: 50mA
• Mounting Holes 2.83” on Center• Rubber Base Gasket Included• Pre-wired with Terminals
OPTIONAL ACCESSORIES• 2-Wire Light Easy-install Loom HD00020-67F
LED: 5MM
COLOR: Amber
DIMENSIONS: 3.86” x 0.71” x 0.95”
VOLT RANGE: 7.5–14 VDC
AMP DRAW: HIGH: 70mA LOW: 50mA
• Mounting Holes 2.83” on Center• Rubber Base Gasket Included• Pre-wired with Terminals
OPTIONAL ACCESSORIES• 2-Wire Light Easy-install Loom HD00020-67F
Be Visible. Stay Safe. ®
44 LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
HeavyDutyLighting.com
45LED SURFACE MOUNT CLEARANCE MARKER LIGHTS
CLEAR LENS HD63015YCSD-3
RED LENS HD41003R
AMBER LENS HD41003Y
AMBER LENS HD45008SMDY
CLEAR LENS HD45008SMDYC
AMBER LENS HD45108SMDY
CLEAR LENS HD45108SMDYC
REAR VIEW BOTH COLORS
REAR VIEW BOTH COLORS
AMBER LENS HD53009SMDY
CLEAR LENS HD53009SMDYC
REAR VIEW BOTH COLORS
AMBER LENS HD63015YSD-3CB
CLEAR LENS HD63015YCSD-3CB
AMBER LENS HD63015YSD-3
CLEAR LENS HD63015YCSD-2
AMBER LENS HD63015YSD-2
AMBER LENS HD63015YSD-2CB
CLEAR LENS HD63015YCSD-2CB
HD63015Y 15 LED
15 LED
15 LED
15 LED
FREIGHTLINER® 2-WIRE TEARDROP SIDE MARKER TURN LIGHT
HD63015Y FREIGHTLINER® 2-WIRE TEARDROP SIDE MARKER TURN LIGHT
HD63015Y FREIGHTLINER® 3-WIRE TEARDROP SIDE MARKER TURN LIGHT
HD63015Y FREIGHTLINER® 3-WIRE TEARDROP SIDE MARKER TURN LIGHT
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.06” x 3.31” x 0.79”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 250mA
• OEM Compatibility with: - Freightliner® Century - Freightliner® Classic - Freightliner® Columbia - Freightliner® Coronado
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Hard Wired with Bullet Terminals• Mounting Holes 4.8” Center to Center• DOT/SAE, P2pc
• OEM Compatibility with: - Freightliner® Century - Freightliner® Classic - Freightliner® Columbia - Freightliner® Coronado
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Hard Wired with Bullet Terminals• Mounting Holes 4.8” Center to Center• DOT/SAE, P2pc
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.06” x 3.31” x 0.79”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 250mA
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.06” x 3.31” x 0.79”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: HIGH: 250mALOW: 170mA
• OEM Compatibility with: - Freightliner® Century - Freightliner® Classic - Freightliner® Columbia - Freightliner® Coronado
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Hard Wired with Bullet Terminals• Mounting Holes 4.8” Center to Center• DOT/SAE, P2pc
LED: Super Duty
COLOR: Amber
DIMENSIONS: 6.06” x 3.31” x 0.79”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: HIGH: 250mALOW: 170mA
• OEM Compatibility with: - Freightliner® Century - Freightliner® Classic - Freightliner® Columbia - Freightliner® Coronado
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Hard Wired with Bullet Terminals• Mounting Holes 4.8” Center to Center
• DOT/SAE, P2pc
HD53009SMDY9 LED
8 LED
8 LED
3 LED
FREIGHTLINER® CASCADIA SIDE MARKER TURN LIGHT
HD45008SMDPETERBILT® OVAL SIDE MARKER TURN LIGHT
HD45108SMDYPETERBILT® OVAL SIDE MARKER TURN LIGHT
HD410034” RECTANGULAR REFLEX CLEARANCE MARKER LIGHT
LED: 3528 SMD/1W HP
COLOR: Amber
DIMENSIONS: 5.08” x 2.72” x 2.68”
VOLT RANGE: 7.5-14 VDC
AMP DRAW HIGH: 228mALOW: 24mA
• OEM Compatibility with: - Freightliner® Cascadia
• Polycarbonate Lens & ABS Housing• Reflector Under Lens Sealed Circuit Board
• Hardwired with Straight 3 Pin Weather Pack Style Connector (Mates to Factory Harness)
• 6 3528 SMD• 3 1W HP
• Design for Use as a Side Marker/Turn Light for Peterbilt® Trucks
• Polycarbonate Lens, ABS Housing• Conformally Coated Circuit Board Electronics
• Moisture & Corrosion Resistant • Weather Pack Style Straight 3 Pin Connector (Mates to Factory Harness)
• Base Gasket Included• Stainless Steel Mounting Studs and Nuts Included
LED: 5050 SMD
COLOR: Amber
DIMENSIONS: 4.43” x 2.1” x 0.375”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: HIGH: 102mALOW: 37mA
LED: 5050 SMD
COLOR: Amber
DIMENSIONS: 4.43” x 2.1” x 0.375”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: HIGH: 102mALOW: 37mA
• Design for Use as a Side Marker/Turn Light for Peterbilt® Trucks
• Polycarbonate Lens, ABS Housing• Conformally Coated Circuit Board Electronics
• Moisture & Corrosion Resistant• Hard-wired, 3-Wire with Bullet Terminal• Base Gasket Included• Stainless Steel Mounting Studs and Nuts Included
LED: 3MM
COLOR: Red/Amber
DIMENSIONS: 3.98” x 1.42” x 0.35”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 20mA
• Reflex Lens Design• PC Lens and Housing Ultrasonically Welded into Single Unit
• 2 Wire with Bullet Terminal• Epoxy Encapsulated Electronics• Includes Rubber Base Gasket
HeavyDutyLighting.com
47LED PEDESTAL MOUNT PARK | TURN LIGHTS
Be Visible. Stay Safe. ®
46 LED PEDESTAL MOUNT PARK | TURN LIGHTS
FRONT VIEW REAR VIEW
FRONT VIEW REAR VIEW
FRONT VIEW REAR VIEW
FRONT VIEW REAR VIEW
FRONT VIEW REAR VIEW
FRONT VIEW REAR VIEW
FRONT VIEW REAR VIEW
FRONT VIEW REAR VIEW
HD50118RY-R2118 LED
118 LED
118 LED
118 LED
DOUBLE POST 5” PEDESTAL PARK TURN LIGHT | RIGHT SIDE
HD50118RY-R2DOUBLE POST 5” PEDESTAL PARK TURN LIGHT | LEFT SIDE
HD50118YY-R2DOUBLE POST 5” PEDESTAL PARK TURN LIGHT | RIGHT SIDE
HD50118YY-L2DOUBLE POST 5” PEDESTAL PARK TURN LIGHT | LEFT SIDE
LED: Super Duty
COLOR: Red/Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 1500mA PARK: 150mA
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
LED: Super Duty
COLOR: Red/Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW STOP/TURN: 1500mA PARK: 150mA
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 1500mA MARKER: 150mA
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 1500mA MARKER: 150mA
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
HD50118RY-R 118 LED
118 LED
118 LED
118 LED
SINGLE POST 5” PEDESTAL PARK TURN LIGHT | RIGHT SIDE
HD50118RY-L SINGLE POST 5” PEDESTAL PARK TURN LIGHT | LEFT
HD50118YY-R SINGLE POST 5” PEDESTAL PARK TURN LIGHT | RIGHT SIDE
HD50118YY-L SINGLE POST 5” PEDESTAL PARK TURN LIGHT | LEFT SIDE
LED: Super Duty
COLOR: Red/Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 1500mA MARKER: 150mA
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
LED: Super Duty
COLOR: Red/Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 1500mA MARKER: 150mA
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 1500mA MARKER: 150mA
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.73” x 4.73” x 2.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW PARK/TURN: 1500mA MARKER: 150mA
• Diode Configuration: - 48 Rear Facing - 64 Front Facing - 6 Traffic Side Facing
• Epoxy Encapsulated Electronics• Pre-wired, No Connector Required• Chrome Housing
HeavyDutyLighting.com
49LED CAB MARKER LIGHTS
Be Visible. Stay Safe. ®
48 LED CAB MARKER LIGHTS
AMBER LENS HD15119Y
CLEAR LENS HD15119YC
AMBER LENS HD10019Y
CLEAR LENS HD10019YC
CLEAR LENS HD15019YC
AMBER LENS HD15019Y
AMBER LENS HD10119Y
CLEAR LENS HD10119YC
HD10131Y31 LED
31 LED
31 LED
31 LED
3” X 11” SQUARE CAB MARKER LIGHT & HOUSING
HD10131YC3” X 11” SQUARE CAB MARKER LIGHT & HOUSING
HD10031YSQUARE CAB MARKER REPLACEMENT LIGHT
HD10031YCSQUARE CAB MARKER REPLACEMENT LIGHT
LED: 5MM
COLOR: Amber
DIMENSIONS: 10.7” x 3.83” x 3.0”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 300mA
• Chromed ABS Housing Includes Gasket• Pre-wired and Ready for Install
• Chromed ABS Housing Includes Gasket• Pre-wired and Ready for Install
LED: 5MM
COLOR: Amber
DIMENSIONS: 10.7” X 3.83” X 3.0”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 300mA
LED: 5MM
COLOR: Amber
DIMENSIONS: 4.92” x 3.7” x 1.97”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 300mA
• Pre-wired and Ready for Install• Replacement Lights for: HD10131Y
LED: 5MM
COLOR: Amber
DIMENSIONS: 4.92” X 3.7” X 1.97”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 300mA
• Pre-wired and Ready for Install• Replacement Lights for: HD10131YC
HD15019Y 19 LED
19 LED
19 LED
19 LED
3” X 15” BLUNT NOSE TORPEDO CAB MARKER LIGHT
HD10019Y 3” BLUNT NOSE TORPEDO CAB MARKER REPLACEMENT LIGHT
HD15119Y 3” X 15” BULLET NOSE TORPEDO CAB MARKER LIGHT
HD10119Y 3” BULLET NOSE TORPEDO CAB MARKER REPLACEMENT LIGHT
LED: 5MM
COLOR: Amber
DIMENSIONS: 15.2” x 3.0” x 1.14”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 140mA
• Chromed ABS Housing• Base Gasket Included• Pre-wired, No Connector Required• Mounting Holes Measure 10.5” Center to Center
• Lamp Only• Includes Gasket• Pre-wired for Easy Install• Designed to Fit: HD15019, HD15019YC and Similiar Lights
LED: 5MM
COLOR: Amber
DIMENSIONS: 3.07” x 2.72”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 140mA
LED: 5MM
COLOR: Amber
DIMENSIONS: 14.88” x 3.0” x 1.14”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 140mA
• Chromed ABS Housing• Base Gasket Included• Pre-wired, No Connector Required• Mounting Holes Measure 10.5” Center to Center
LED: 5MM
COLOR: Amber
DIMENSIONS: 3.07” x 2.80”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 140mA
• Lamp Only• Includes Gasket• Pre-wired for Easy Install• Designed to Fit: HD15019Y, HD15019YC and Similar Lights
HD00020-200
HD00020
HD00031
HeavyDutyLighting.com
51CONNECTORS & MOUNTING ACCESSORIES
HD00020-10024
HD00021
HD00032F
HD00030-100
HD00230
HD00036WP
HD00020-67F
HD00022F
HDTS06-2S6
HD00021-67F
HD00030
HD00020-100
CONN
ECTO
RSCO
NNEC
TORS
CONN
ECTO
RS
CONN
ECTO
RSCO
NNEC
TORS
CONN
ECTO
RS
CONN
ECTO
RSCO
NNEC
TORS
CONN
ECTO
RS
CONN
ECTO
RSCO
NNEC
TORS
CONN
ECTO
RS
CONN
ECTO
RSCO
NNEC
TORS
CONN
ECTO
RS
2 PIN CONTINUOUS LOOM
12” SPACING 200 MALE PLUGS
2 PIN IN-LINE MALE CONNECTOR
3 PIN STRAIGHT MALE CONNECTOR
2 PIN LOOM CONTINUOUS LOOM
24” SPACING 100 MALE PLUGS
2 PIN 90° ANGLE CONNECTOR
3 PIN STRAIGHT FEMALE CONNECTOR
3 PIN CONTINUOUS LOOM
12” SPACING 100 MALE PLUGS
2 PIN 90° ANGLE MALE CONNECTOR
3 PIN CONNECTOR TO WEATHERPACK CONNECTOR
2 PIN CONTINUOUS LOOM
18” SPACING 67 FEMALE PLUGS
2 PIN IN-LINE FEMALE CONNECTOR
6” CONTINUOUS 2 PIN LOOM
RIGHT ANGLE CONNECTORS FITS ALL CLEARANCE MARKER
LIGHTS WITH 2 PIN MALE CONNECTORS
2 PIN CONTINUOUS LOOM
12” SPACING 67 FEMALE PLUGS
3 PIN 90° ANGLE CONNECTOR
2 PIN CONTINUOUS LOOM
6” PLUG SPACING 100 MALE PLUGS
Be Visible. Stay Safe. ®
50 LED CAB MARKER LIGHTS
CLEAR LENS HD63003YCSD
AMBER LENS HD63003YSD
CLEAR LENS HD63203YCSD
AMBER LENS HD63203YSD
AMBER LENS HD45012Y
AMBER LENS HD47004YSD
CLEAR LENS HD47004YCSD
CLEAR LENS HD45012YC
REAR VIEW BOTH
REAR VIEW BOTH
6” PIGTAIL WITHDEUTSCH CONNECTOR
HD63003Y 3 LED
3 LED
12 LED
4 LED
FREIGHTLINER® PRE 2014 CASCADIA CAB MARKER LIGHT
HD63203Y FREIGHTLINER® POST 2014 CASCADIA CAB MARKER LIGHT
HD45012Y FREIGHTLINER® RECTANGULAR CAB MARKER LIGHT
HD47004Y FREIGHTLINER® RECTANGULAR CAB MARKER LIGHT
LED: Super Duty
COLOR: Amber
DIMENSIONS: 5.88” x 1.77” x 1.86”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 40mA
• OEM Compatability with: Freightliner® Cascadia
• Universal Design• Polycarbonate Lens and ABS Housing • Epoxy Encapsulated Electronics SeaLED for Moisture Protection
• Mirror Chrome Diode Reflector• Weather Pack Style Straight 2 Pin Connector (Mates to Factory Harness)
• OEM Compatability with: Freightliner® Cascadia
• Universal Design• Polycarbonate Lens and ABS Housing • Epoxy Encapsulated Electronics SeaLED for Moisture Protection
• Mirror Chrome Diode Reflector• Weather Pack Style Straight 2 Pin Connector (Mates to Factory Harness)
LED: Super Duty
COLOR: Amber
DIMENSIONS: 5.88” x 1.77” x 1.86”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 40mA
LED: 5MM
COLOR: Amber
DIMENSIONS: 4.5” x 2.2” x 1.5”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 140mA
• Polycarbonate Lens• ABS Housing• Epoxy Encapsulated Electronics• Base Gasket Included• Hard-wired with Bullet Connectors
LED: Super Duty
COLOR: Amber
DIMENSIONS: 4.7” x 2.39” x 0.34”
VOLT RANGE: 7.5-14 VDC
AMP DRAW: 22mA
• Factory Style Angled 2 Pin Weather Pack Connector
• Polycarbonate Lens and Housing• Epoxy Encapsulated Electronics• Mounting Holes 3 5/8” On Center• SAE DOT P2 13
Be Visible. Stay Safe. ®
52 LED STOP | TAIL | TURN & PARK TURN LIGHTS
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
BEZE
LBE
ZEL
BEZE
L
BEZE
LBE
ZEL
BEZE
L
BEZE
LBE
ZEL
BEZE
L
BEZE
LBE
ZEL
BEZE
L
BEZE
LBE
ZEL
BEZE
L
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
2” CHROMEPLASTIC BEZEL
HD25000PC
HD21000SS
HD26000-RG
HeavyDutyLighting.com
53CONNECTORS & MOUNTING ACCESSORIES
HD25109BP
HD26000-SLEEK
HD26000-SS
HD25109PC
HD34000SS
HD40811C
HD40113BP
HD26000-OVAL
HD31703-APAD
HD40113PC
HD63000CB
HD72006-APAD
BASE
MOU
NTBE
ZEL
BASE
GAS
KET
BASE
MOU
NTBE
ZEL
BRUS
H GU
ARD
BASE
MOU
NTBE
ZEL
BRUS
H GU
ARD
BASE
MOU
NTBA
SE M
OUNT
BEZE
L
BASE
MOU
NTBE
ZEL
BASE
MOU
NT
ABS CHROME BASE MOUNT
FITS HD25103
OVAL STAINLESS STEEL BEZEL
FITS HD21002
MARKER RUBBER GASKET FITS HD26002
ABS BLACK BASE MOUNT
FITS HD25108
2” CHROME PLASTIC BEZEL FITS HD26002
STAINLESS BRUSH GUARD FITS HD26002
ABS CHROME BASE MOUNT
FITS HD25108
ROUND STAINLESS STEEL BEZEL
FITS HD34003
CHROME BRUSH GUARD FITS HD40810
RUBBER 30 DEGREE ANGLED BASE MOUNT
FITS HD31703
RUBBER 30 DEGREE ANGLED BASE MOUNT
FITS HD72006
ABS BLACK BASE MOUNT
FITS HD40112
OVAL CHROME PLASTIC BEZEL FITS HD26002
ABS CHROME BASE MOUNT
FITS HD40112
TEARDROP CHROME PLASTIC BEZEL FITS HD63015
Be Visible. Stay Safe. ®
52 CONNECTORS & MOUNTING ACCESSORIES
HD25096PC
HD00021-100F
HD25095G
HD20096PC
HD00022-67F
HD20095G
HD40096PC
HD00022-108F
HD25195G
HD60096PC
HD40099SS
HD40095G
HD60097PC
HD50095G
HD60095G
BEZE
LCO
NNEC
TORS
GROM
MET
BEZE
LCO
NNEC
TORS
CONN
ECTO
RS
GROM
MET
BEZE
LGR
OMM
ET
BEZE
LGR
OMM
ET
BEZE
LGR
OMM
ET
2” CHROME PLASTIC BEZEL
2 PIN CONTINUOUS LOOM 12” SPACING
100 FEMALE PLUGS
2” GROMMET
2.5” CHROME PLASTIC BEZEL
2 PIN CONTINUOUS LOOM 6” SPACING
108 FEMALE PLUGS
4" STAINLESS SECURITY FLANGE
RECTANGLE GROMMET
2.5” GROMMET APPROXIMATE MOUNTING
HOLE SIZE: 3”
4” CHROME PLASTIC BEZEL
2.5” GROMMET APPROXIMATE MOUNTING
HOLE SIZE: 2.75”
6” OVAL CHROME PLASTIC BEZEL
4” GROMMET
6” OVAL CHROME PLASTIC BEZEL W/ VISOR
6” OVAL GROMMET
2 PIN CONTINUOUS LOOM
6” SPACING 67 FEMALE PLUGS SE
CURI
TY F
LANG
E
GROM
MET
Be Visible. Stay Safe. ®
54 LED ELECTRONIC FLASHERS
HeavyDutyLighting.com
55LED ELECTRONIC FLASHERS
HDF03054 3 PIN
2 PIN
3 PIN
3 PIN
ELECTRONIC WIGWAG LED FLASHER
HDF03055 ELECTRONIC LED FLASHER
HDF03056 ELECTRONIC LED FLASHER
HDF03057 ELECTRONIC LED FLASHER
VOLTAGE: 12VDC
AMPS: 60mA
FLASH RATE: 60-120 FPM
TERMINALS: (+)(L1)(L2)
WATTS: 3W-120W
• Variable Load Electronically Controlled • Provides Steady Flash Rate for all LED and Incandescent Lamps
• Bracket Included
• Variable Load Electronically Controlled Flash Rate
• Provides Steady Flash Rate for All LED and Incandescent Lamps
• External Ground• Bracket Included• Popular Replacement in Peterbilt, Kenworth, and Other Applications
VOLTAGE: 12VDC
AMPS: 60mA-15A
FLASH RATE: 60-120 FPM
TERMINALS: (+)(L)
WATTS: 0.1W-130W
VOLTAGE: 12VDC
AMPS: 60mA-15A
FLASH RATE: 60-120 FPM
TERMINALS: (+)(L)
WATTS: 0.1W-130W
• North American, (ISO) Pin Out Flasher• Variable Load Electronically Controlled Flash Rate
• Provides Steady Flash Rate for All LED and Incandescent Lamps
• Bracket Included
VOLTAGE: 12VDC
AMPS: 60mA-15A
FLASH RATE: 60-120 FPM
TERMINALS: (-31)(L/49a)(+/49)
WATTS: 0.1W-130W
• North American, (ISO)Pin Out Flasher• Variable Load Electronically ControlLED • Provides Steady Flash Rate for all LED and incandescent Lamps
• Bracket Included
HDF030583 PIN
5 PIN
4 PIN
ELECTRONIC WIGWAG LED FLASHER
HDF03083ELECTRONIC LED FLASHER
HDF03084ELECTRONIC LED FLASHER
VOLTAGE: 12VDC
AMPS: 60mA-15A
FLASH RATE: 60-120 FPM
TERMINALS: (X)(P)(L)
WATTS: 0.1W-130W
• Variable Load Electronically Controlled• External Ground• Provides Steady Flash Rate for all LED and Incandescent Lamps
• Bracket Included
• ISO Terminals• Designed for Use with Factory Wiring as a Direct Replacement for the OE Flasher
• Variable Load Electronically Controlled Flash Rate
• Provides Steady Flash Rate for Turn Signals and Hazard Lamps
• Works with All LED and Incandescent Lamps
• Popular FORD Replacement
VOLTAGE: 12VDC
AMPS: 60mA
FLASH RATE: 60-120 FPM
TERMINALS: (I)(B)(H)(E)(L)
WATTS: 162W MAX
VOLTAGE: 12VDC
AMPS: 1A-15A
FLASH RATE: 60-120 FPM
TERMINALS: (-)(+)(S)(L)
WATTS: 162W Max
• Uses Smaller 280 terminals• Designed for Use with Factory Wiring as a Direct Replacement for the OE Flasher
• Variable Load Electronically Controlled Flash Rate
• Provides Steady Flash Rate for Turn Signals and Hazard Lamps
• Works with All LED and Incandescent Lamps
• Popular GM Replacement
HeavyDutyLighting.com
57LED REPLACEMENT BULBS
Be Visible. Stay Safe. ®
56 LED REPLACEMENT BULBS
EACH PART NUMBER IS ONE PACKAGE. PACKAGE INCLUDES ONE BULB.
194 t10 & 194 t10 360: Above SAE replacements for 158, 168, 194, 12961 and others. Each Part# is one package / package includes two bulbs For aftermarket use: For after market use. May not comply with SAE or U.S. DOT standards. Perfect replacement for most * incandescent vehicle lighting. Fit standard vehicle sockets. Super bright 360 degree light dispersion design. Resistor Statement: Since LED bulbs draw much less current then standard incandescent bulbs some vehicle computers may think a bulb is out. If installing LED bulbs in your car, truck or motorcycle causes your blinkers to blink fast or causes other electrical problems it may be necessary to install a load resistor to correct these problems. Thermal Flasher: LED brake/tail lamps my not work with some older thermal flasher units. An LED brake/tail lamp will require an electronic flasher/blinker unit which is commonly available at your local auto parts store or from HDL.
HD1156WSD 13 LEDHD19406B-3W 6 LED
HD19406B-3A 6 LED
HD19406B-3B 6 LED
HD1157WSD 13 LEDHD19406W-3W 6 LED
HD19406W-3A 6 LED
HD19406W-3B 6 LED
HD3156WSD 13 LEDHD19405W-SMDW 5 LED
HD19405W-SMDA 5 LED
HD19405W-SMDB 5 LED
HD3157WSD 13 LEDHD92109W-3W 9 LED
HD92109W-3A 9 LED
HD92109W-3B 9 LED
HD92109W-3G 9 LED
3156
194
T1
0
1157
194
T1
019
4
T10
194
T1
0
1156
1895
BA
9S
3157
921/
912
T15
COOL WHITECOOL WHITE
AMBER
COOL WHITE
COOL WHITECOOL WHITE
AMBER
COOL WHITE
COOL WHITECOOL WHITE
AMBER
COOL WHITE
COOL WHITECOOL WHITE
AMBER
COOL WHITE
HD1156RSD 13 LEDHD19406B-3R 6 LED
HD19406B-3P 6 LED
HD19406B-3G 6 LED
HD1157RSD 13 LEDHD19406W-3R 6 LED
HD19406W-3P 6 LED
HD19406W-3G 6 LED
NOT AVAILABLEHD19405W-SMDR 5 LED
HD19405W-SMDP 5 LED
HD19405W-SMDG 5 LED
HD3157RSD 13 LED
3156
1157
194
T1
019
4T1
019
4
T10
1156
3157
REDRED
PURPLE
GREEN
REDRED
PURPLE
GREEN GREEN
REDREDRED
PURPLE
GREEN
HD1156YSD 13 LED HD1157YSD 13 LED HD3156YSD 13 LED HD3157YSD 13 LED
3156
1157
3157
AMBER AMBER AMBER AMBER
HD1156WSD-18 18 LED HD1157WSD-18 18 LED HD3156WSD-18 18 LED HD3157WSD-18 18 LED
3156
1157
1156
3157
COOL WHITE COOL WHITE COOL WHITE COOL WHITE
HD1156RSD-18 18 LED HD1157RSD-18 18 LED NOT AVAILABLE HD3157RSD-18 18 LED
3156
1157
1156
3157
RED RED RED
HD1156YSD-18 18 LED HD1157YSD-18 18 LED HD3156YSD-18 18 LED HD3157YSD-18 18 LED
3156
1157
1156
3157
AMBER AMBER AMBER AMBER
1156
NA
NA
STYLE 1156 LED: 5MM
WIDTH: HEIGHT-13 LED: 0.93”HEIGHT-18 LED: 1.75”
VOLTAGE: 2.0”AMPS-13 LED: 8-14 vdcAMPS-18 LED: .24A
.29A
STYLE 1895 LED: 3MM
WIDTH: 0.5”
HEIGHT: 0.84”
VOLTAGE: 8-14 VDC
AMP DRAW: 30mA
STYLE 1157 LED: 5MM
WIDTH: HEIGHT-13 LED: 0.93”HEIGHT-18 LED: 1.75”
VOLTAGE: 2.0”AMPS-13 LED: 8-14 VDCAMPS-18 LED: S/T: .29A, T: .08A
S/T .31A, T:09A
STYLE 194 LED: 3MM
WIDTH: 0.63”
HEIGHT: 1”
VOLTAGE: 8-14 VDC
AMP DRAW: 36mA
STYLE 3156 LED: 5MM
WIDTH: HEIGHT-13 LED: 0.93”HEIGHT-18 LED: 1.75”
VOLTAGE: 2.0”AMPS-13 LED: 8-14 vdcAMPS-18 LED: .24A
.29A
STYLE 194 LED: SMD
WIDTH: 0.5”
HEIGHT: 1”
VOLTAGE: 8-14 VDC
AMP DRAW: 35mA
STYLE 3157 LED: 5MM
WIDTH: HEIGHT-13 LED: 0.93”HEIGHT-18 LED: 1.75”
VOLTAGE: 2.0”AMPS-13 LED: 8-14 VDCAMPS-18 LED: S/T .29A, T:.08A
S/T: .31A, T: .09A
STYLE 921 LED: 3MM
WIDTH: 0.5”
HEIGHT: 1.2”
VOLTAGE: 8-14 VDC
AMP DRAW: 36mA
HD92109W-3R 9 LED
1895
BA
9S18
95B
A9S
1895
BA
9S18
95B
A9S
1895
BA
9S
194
T1
019
4
T10
194
T1
019
4
T10
194
T1
0
921/
912
T15
921/
912
T15
921/
912
T15
921/
912
T15
921/
912
T15
HD92109W-3P 9 LED
Be Visible. Stay Safe. ®
58 LED STOP | TAIL | TURN & PARK TURN LIGHTS
Be Visible. Stay Safe. ® HeavyDutyLighting.com
58 LED REPLACEMENT BULBS 59LED REPLACEMENT BULBS
HD67018Y 18 LED HD68018Y 18 LED HD89009SMDY 9 LED HD90009SMDY 9 LED
HD67018R 18 LED HD68018R 18 LED HD89009SMDR 9 LED HD90009SMDR 9 LED
HD67018W 18 LED HD68018W 18 LED HD89009SMDW 9 LED
HD1156YSMD-18 18 LED HD1157YSMD-18 18 LED HD3156YSMD-18 18 LED HD3157YSMD-18 18 LED
HD1156RSMD-18 18 LED HD1157RSMD-18 18 LED NOT AVAILABLE HD3157RSMD-18 18 LED
HD1156WSMD-18 18 LED HD1157WSMD-18 18 LED HD3156WSMD-18 18 LED HD3157WSMD-18 18 LED
1157
3157
1156
1157
3156
3157
1156
3156
COOL WHITE COOL WHITE COOL WHITE COOL WHITE
RED RED RED
6868
68
8989
9090
6767
89
RED RED RED RED
AMBER AMBER AMBER AMBER
COOL WHITE COOL WHITE COOL WHITE COOL WHITE
671157
3156
3157
1156
AMBER AMBER
EACH PART NUMBER IS ONE PACKAGE. PACKAGE INCLUDES TWO BULBS. ALL 67 AND 89 BULBS ARE SINGLE CONTACT, SINGLE FUNCTION. FIT MOST SAE CROSS REFERENCES 67, 89, 1003, 1156.
ALL 68 AND 90 BULBS ARE TWO CONTACT, TWO FUNCTION. FIT MOST SAE CROSS REFERENCES: 68, 90, 94, 1157.
EACH PART NUMBER IS ONE PACKAGE. PACKAGE INCLUDES ONE BULB.
AMBERAMBER
HD90009SMDW 9 LED
90
STYLE 1156 LED: SMD
WIDTH: 0.67”
HEIGHT: 1.73”
VOLTAGE: 8 - 14 VDC
AMP DRAW: .15A
STYLE 1157 LED: SMD
WIDTH: 0.67”
HEIGHT: 1.73”
VOLTAGE: 8-14 VDC
AMP DRAW: Stop/turn: .16A
Tail: .02A
STYLE 3156 LED: SMD
WIDTH: 0.67”
HEIGHT: 2.24”
VOLTAGE: 8 - 14 VDC
AMP DRAW: .15A
STYLE 3157 LED: SMD
WIDTH: 0.67”
HEIGHT: 2.24”
VOLTAGE: 8-14 VDC
AMP DRAW: Stop/Turn: .16A
Tail: .02A
STYLE 67 LED: 5MM
WIDTH: 0.75”
HEIGHT: 1.56”
VOLTAGE: 8 - 14 VDC
AMP DRAW: .24A
Tail: .02A
STYLE 68 LED: 5MM
WIDTH: 0.75”
HEIGHT: 1.56”
VOLTAGE: 8-14 VDC
AMP DRAW: Stop/Turn: .29A
Tail: .08A
STYLE 89 LED: SMD
WIDTH: 0.75”
HEIGHT: 1.48”
VOLTAGE: 8 - 14 VDC
AMP DRAW: .07A
Tail: .02A
STYLE 90 LED: SMD
WIDTH: 0.75”
HEIGHT: 1.48”
VOLTAGE: 8-14 VDC
AMP DRAW: Stop/Turn: .08A
Tail: .02A
HeavyDutyLighting.com
61DISPLAYS & SALES AIDS
Be Visible. Stay Safe. ®
60 DISPLAYS & SALES AIDS
* PREWIRED WITH AC/DC POWER ADAPTER
* PREWIRED WITH AC/DC POWER ADAPTER
* PREWIRED WITH AC/DC POWER ADAPTER
* PREWIRED WITH AC/DC POWER ADAPTER
HDDSPB58 UNITS
11 UNITS
14 UNITS
22 UNITS
23” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HDDSPB623” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HDDSPB723” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HDDSPB823” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HD60060R: 60 LED 6” Oval Red Stop/Tail/Turn
HD60060Y: 60 LED 6” Oval Amber Park/Turn
HD60010RSD: 10 LED 6” Oval Red Stop/Tail/Turn
HD60010YSD: 10 LED 6” Oval Amber Park/turn
HD40012RSD: 12 LED 4” Round Red Stop/Tail/Turn
HD40012YSD: 12 LED 4” Round Amber Park/Turn
HD40007RSD: 7 LED 4” Round Red Stop/Tail/Turn
HD40007RSD: 7 LED 4” Round Amber Park/Turn
HD60010RSD: 10 LED 6” Oval Re Stop/Tail/Turn
HD60010YSD: 10 LED 6” Oval amber Park/Turn
HD60010WSD: 10 LED 6” Oval White Back-Up
HD25108R: 8 LED 2.5” Rectangle Red Clearance Marker
HD25108Y: 8 LED 2.5” Rectangle Amber Clearance Marker
HD30106R: 6 LED Rectangle Red Clearance Marker
HD30106Y: 6 LED Rectangle Amber Clearance Marker
HD40112RC: 12 LED 4” Rectangle Clear Red Marker
HD40112YC: 12 LED 4” Rectangle Clear Amber Marker
HD60804RSD: 4 LED Oval Marker with Chrome Bezel
HD60804YSD: 4 LED Oval Marker with Chrome Bezel
HD20010R: 10 LED 2” Round Red Clearance Marker
HD20010Y: 10 LED 2” Round Amber Clearance Marker
HD20003RSD: 3 LED 2” Round Red Clearance Marker
HD20003YSD: 3 LED 2” Round Amber Clearance Marker
HD25013R:" 13 LED 2.5” Round Red Clearance Marker
HD25013Y: 13 LED 2.5” Round Amber Clearance Marker
HD25003RSD: 3 LED 2.5” Round Red Clearance Marker
HD25003YSD: 3 LED 2.5” Round Amber Clearance Marker
HD20310R: 10 LED 2” BEEHIVE Red Clearance Marker
HD20310Y: 10 LED 2” BEEHIVE Amber Clearance Marker
HD60020R: 20 LED 2X6 Rectangle Red Clearance Marker
HD60020Y: 20 LED 2X6 Rectangle Amber Clearance Marker
HD60804RSD: 4 LED Oval Marker with Chrome Bezel
HD60804YSD: 4 LED Oval Marker with Chrome Bezel
HD34003BCSMD: 3 LED 3/4” Rnd Clear/Blue Clearance MarkerHD34003RCSMD: 3 LED 3/4” Rnd Clear/Red Clearance MarkerHD34003RSMD: 3 LED 3/4” Rnd Red Clearance MarkerHD34003WCSMD: 3 LED 3/4” Rnd Clear/White Clearance MarkerHD34003YCSMD: 3 LED 3/4” Rnd Clear/Amber Clearance MarkerHD34003YSMD: 3 LED 3/4” Rnd Amber Clearance MarkerHD21002SMDBC: 2 LED Oval Clear/Blue Clearance MarkerHD21002SMDRC: 2 LED Oval Clear/Red Clearance MarkerHD21002SMDR: 2 LED Oval Red Clearance MarkerHD21002SMDWC: 2 LED Oval Clear/White Clearance MarkerHD21002SMDYC: 2 LED Oval Clear/Amber Clearance Marker
HD21002SMDY: 2 LED Oval Amber Clearance MarkerHD26002RCSD: 2 LED Oval Clear/Red Clearance MarkerHD26002RSD: 2 LED Oval Red Clearance MarkerHD26002YCSD: 2 LED Oval Clear/Amber Clearance MarkerHD26002YS: 2 LED Oval Amber Clearance MarkerHD20007SMDR: 7 LED Red Surface Mount MarkerHD20007SMDY: 7 LED Amber Surface Mount MarkerHD25009SMDR: 9 LED Red Surface Mount MarkerHD25009SMDY: 9 LED Amber Surface Mount MarkerHD37004SMDR: 4 LED Red Surface Mount MarkerHD37004SMDY: 4 LED Amber Surface Mount Marker
HDDSPB1 14 UNITS
10 UNITS
11 UNITS
8 UNITS
23” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HDDSPB2 23” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HDDSPB3 23” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HDDSPB4 23” X 16” SELF-POWERED ILLUMINATED DISPLAY BOARD
HD20010R: 10 LED 2” Red Clearance Marker
HD20010Y: 10 LED 2” Amber Clearance Marker
HD20010RC: 10 LED 2” Clear Red Clearance Marker
HD20010YC: 10 LED 2” Clear Amber Clearance Marker
HD20310R: 10 LED 2” Red Beehive Clearance Marker
HD20310Y: 10 LED 2” Amber Beehive Clearance Marker
HD25013R: 13 LED 2.5” Red Clearance Marker
HD25013Y: 13 LED 2.5” Amber Clearance Marker
HD25013RC: 13 LED 2.5” Clear Red Clearance Marker
HD25013YC: 13 LED 2.5” Clear Amber Clearance Marker
HD40810RC: 10 LED Clear Red BullsEye Clearance Marker
HD40810YC: 10 LED Clear Amber BullsEye Clearance Marker
HD60813RC: 13 LED Clear Red Clearance Marker
HD60813YC: 13 LED Clear Amber Clearance Marker
HD40012RSD: 12 LED 4” Red Stop/Tail/Turn
HD40012YSD: 12 LED 4” Amber Park/Turn
HD40212PC: 12 LED White License
HD40212BL: 12 LED White License
HD40106R: 6 LED 4” Red Slim-line Clearance Marker
HD40106Y: 6 LED 4” Amber Slime-line Clearance Marker
HD40810R: 10 LED Red Dbl. BullsEye Clearance Marker
HD40810Y: 10 LED Amber Dbl. BullsEye Clearance Marker
HD60813R: 13 LED Red Clearance Marker
HD60813Y: 13 LED Amber Clearance Marker
HD60015RSD: 15 LED 6” Oval Red Stop/Tail/Turn
HD60021YSD: 21 LED 6” Oval Amber Park/Turn
HD60027WSD: 27 LED 6” Oval White Back-Up
HD25108R: 8 LED 2.5” Red Clearance Marker
HD25108Y: 8 LED 2.5” Amber Clearance Marker
HD40112R: 12 LED 4” Red Clearance Marker
HD40112Y: 12 LED 4” Amber Clearance Marker
HD40112RC: 12 LED 4” Clear Red Clearance Marker
HD40112YC: 12 LED 4” Clear Amber Clearance Marker
HD30106R: 6 LED Red Clearance Marker
HD30106Y: 6 LED Amber Clearance Marker
HD60060R: 60 LED 6” Oval Red Stop/Tail/Turn
HD60060Y: 60 LED 6” Oval Amber Park/Turn
HD60013RCSDM: 13 LED 6” Oval Clear Red Stop/Tail/Turn*
HD60027YCSDM: 27 LED 6” Oval Clear Amber Park/Turn*
HD40040R: 40 LED 4” Red Stop/Tail/Turn
HD40040Y: 40 LED 4” Amber Park/Turn
HD40012RCSDM: 12 LED 4” Clear Red Stop/Tail/Turn*
HD40012YCSDM: 12 LED 4” Clear Amber Park/Turn*
* PLUS MIRROR REFLECTOR UNDER LENS
63INDEX
HeavyDutyLighting.comBe Visible. Stay Safe. ®
62 LED DISPLAY SALES AIDS
Includes The Following• HD1156YSD (4 Ea.)• HD1156WSD (2 Ea.)• HD1157YSD (2 Ea.)• HD1157RSD (4 Ea.)• HD1157WSD (2 Ea.)• HD3156YSD (4 Ea.)• HD3156WSD (2 Ea.)• HD3157YSD (2 Ea.)• HD3157RSD (4 Ea.)• HD3157WSD (2 Ea.)
Banner2W• 6’ White Vinyl Banner• 4 Grommets’• 2’X6’
Banner2B• 6’ Black Vinyl Banner• 4 Grommets’• 2’X6’
BOTH RACKS ARE DESIGNED FOR COUNTER OR PEGBOARD USE. ALSO INCLUDED: POS SIGN W/MOUNTED SOCKET & HD1156YSD BULB PLUS POWER TRANSFORMER TO SHOW THE BULB LIT UP!
AC to DC Power Adapter• AC100-240V input• DC12V 1.0 AMP Output• Equipped with: Red (+) and Black (-) Alligator Clips
AC to DC Power Adapter• AC100-240V input• DC12V 2.0 AMP Output• Equipped with: Red (+) and Black (-) Alligator Clips
SHOWROOM WORK LIGHT DISPLAY:
Designed for use as A stand-alone counter
top display or can be hung on slat wall.
INCLUDES AC TO DC POWER ADAPTOR, POP DISPLAY LITERATURE AND EIGHT OF OUR MOST POPULAR LIGHTS.
PART# PAGE PART# PAGE PART# PAGE PART# PAGE PART# PAGE PART# PAGE PART# PAGE
HD46006-3WFL: 6 LED High Output Round Slim Line Work Light
HD46008-3SP: 8 LED High Output Oval Work Light
HD42505-3WFL: 5 LED High Output Square Slim Line Work Light
HD55009-3WFL: 9 LED High Output Round Work Lights
HD52609-3WFL: 9 LED High Output Sqaure Work Light
HD47554WL: 54 LED Round Work Light | Rubber Housing
HD46206-3SP: 6 LED High Output Rectangular Work Lights
HD47506WFL: 6 LED High Output Round Work Light | Rubber Housing
HD32006-3WFL: High Output Mini Square Work Light
HD35003-3YWFL: High Output Mini Round Spot Lamp
HD31703-5WFL: High Output Surface Mount Work/Clearance Light
HD31703-3YFL: High Output Surface Mount Work/Clearance Light
HD72006-3WFLFM: Flush Mount Slim Rectangular Hight Power Work Flood Lamp
HDD408DSP 8 UNITS LED WORK LIGHT DISPLAY
HDD405DSP
BANNERS 15 LOOP WIRE DISPLAY RACK (STOCKED): DSPBLB1
HDLC1-12-2A HDLC-2307
BANNER1B 62BANNER1W 62BANNER2B 62BANNER2W 62DSPBLB1 62DSPBLB1-1 62HD00020 51HD00020-100 51HD00020-200 51HD00021 51HD00021-100F 52HD00022-108F 52HD00022-67F 52HD00022F 51HD00030 51HD00031 51HD00032F 51HD00036WP 51HD00230 51HD10019Y 48HD10019YC 48HD10031Y 49HD10031YC 49HD10119Y 48HD10119YC 48HD10131Y 49HD10131YC 49HD1156RSD 57HD1156RSD-18 57HD1156RSMD-18 58HD1156WSD 57HD1156WSD-18 57HD1156WSMD-18 58HD1156YSD 57HD1156YSD-18 57HD1156YSMD-18 58HD1157RSD 57HD1157RSD-18 57HD1157RSMD-18 58HD1157WSD 57HD1157WSD-18 57HD1157WSMD-18 58HD1157YSD 57HD1157YSD-18 57HD1157YSMD-18 58HD12018CW-DC 27HD15019Y 48HD15019YC 48HD15119Y 48HD15119YC 48HD17011RCSD 19HD17011RSD 19HD18027CW-DC 27HD19405W-SMDA 56HD19405W-SMDB 56HD19405W-SMDG 56HD19405W-SMDP 56HD19405W-SMDR 56
HD19405W-SMDW 56HD19406B-3A 56HD19406B-3B 56HD19406B-3G 56HD19406B-3P 56HD19406B-3R 56HD19406B-3W 56HD19406W-3A 56HD19406W-3B 56HD19406W-3G 56HD19406W-3P 56HD19406W-3R 56HD19406W-3W 56HD20003RCSD 31HD20003RSD 31HD20003YCSD 31HD20003YSD 31HD20007SMDR 36HD20007SMDY 36HD20009R 31HD20009Y 31HD20010R 32HD20010RC 32HD20010Y 32HD20010YC 32HD20095G 52HD20096PC 52HD20309R 34HD20309Y 34HD20310R 34HD20310RC 34HD20310Y 34HD20310YC 34HD21000SS 53HD21002SMDR 30HD21002SMDBC 30HD21002SMDRC 30HD21002SMDWC 23HD21002SMDY 30HD21002SMDYC 30HD23012SMD-CW 27HD23024SMD-CW 27HD24036CV-DC 27HD25000PC 53HD25003RCSD 32HD25003RSD 32HD25003WSD 21HD25003YCSD 32HD25003YSD 32HD25009SMD 36HD25009SMDR 36HD25009SMDY 36HD25012R 33HD25012Y 33HD25013R 33HD25013RC 33HD25013Y 33HD25013YC 33
HD25095G 52HD25096PC 52HD25103RSD 39HD25103WSD 22HD25103YSD 39HD25108R 39HD25108R-3IDSS 41HD25108RC 39HD25108W 22HD25108Y 39HD25108YC 39HD25109BP 53HD25109PC 53HD25113R 36HD25113Y 36HD25195G 52HD25312R 35HD25312Y 35HD25313R 35HD25313RC 35HD25313Y 35HD25313YC 35HD26000-RG 53HD26000-SLEEK 53HD26000-SS 53HD26002RCSD 38HD26002RSD 38HD26002YCSD 38HD26002YSD 38HD26004-3SP 10HD26004-3WFL 10HD30004BL 23HD30106R 41HD30106Y 41HD3156WSD 57HD3156WSD-18 57HD3156WSMD-18 58HD3156YSD 57HD3156YSD-18 57HD3156YSMD-18 58HD3157RSD 57HD3157RSD-18 57HD3157RSMD-18 58HD3157WSD 57HD3157WSD-18 57HD3157WSMD-18 58HD3157YSD 57HD3157YSD-18 57HD3157YSMD-18 58HD31703-3GFL 9HD31703-3RFL 9HD31703-3YFL 9HD31703-5BFL 9HD31703-5WFL 9HD32000-AF 10HD32000-BF 10HD32000-YF 10HD32006-3SP 10
HD32006-3WFL 10HD33006-3SP 11HD34000SS 53HD34001R-3IDSS 41HD34003-3RCSMD 29HD34003-3RSMD 29HD34003-3YCSMD 29HD34003-3YSMD 29HD34003BCSMD 30 HD34003RCSMD 29HD34003RSMD 29HD34003WCSMD 24HD34003YCSMD 29HD34003YSMD 29HD34103RCSMD 28HD34103RSMD 28HD34103WCSMD 24HD34103YCSMD 28HD34103YSMD 28HD35003-3SP 11HD35003-3WFL 11HD35003-3YSP 11HD35003-3YWFL 11HD35006-3SP 10HD35006-3WFL 10HD35015WSD 24HD35018WSD 24HD36054CW-DC 27HD37004SMDR 38HD37004SMDRC 38HD37004SMDY 38HD37004SMDYC 38HD40007RSD 13HD40007WSD 20HD40007YSD 13HD40012RCSDM 14HD40012RSD 14HD40012WSD 20HD40012YCSDM 14HD40012YSD 14HD40032R 13HD40032Y 13HD40040R 12HD40040RC 12HD40040W 20HD40040Y 12HD40040YC 12HD40056W 20HD40095G 52HD40096PC 52HD40099SS 52HD40106R 42HD40106R-3 42HD40106RC 42HD40106RC-3 42HD40106Y 42HD40106Y-3 42HD40106YC 42
HD40106YC-3 42HD40112R 40HD40112RC 40HD40112W 22HD40112Y 40HD40112YC 40HD40113BP 53HD40113PC 53HD40212BL 23HD40212PC 23HD40810R 37HD40810RC 37HD40810RCSMD 37HD40810RSMD 37HD40810Y 37HD40810YC 37HD40810YCSMD 37HD40810YSMD 37HD40811C 53HD41003R 45HD41003Y 45HD42504WHP 11HD42504YHP 11HD42505-3WFL 7HD42505-3WFLMAGP 7HD42505-3WFLMAGS 7HD45006-1WFL 8HD45006-3WFL 8HD45006-3WSP 8HD45008SMDY 45HD45008SMDYC 45HD45012Y 50HD45012YC 50HD45108SMDY 45HD45108SMDYC 45HD46006-3WFL 7HD46006-3WFLMAGP 7HD46006-3WFLMAGS 7HD46008-3SP 5HD46008-3WFL 5HD46206-3SP 4HD46206-3WFL 4HD46208-3SP 4HD46208-3WFL 4HD46209-3SP 4HD46209-3WFL 4HD46308-3SP 4HD46308-3WFL 4HD46516-3SP 5HD46516-3WFL 5HD47004YCSD 50HD47004YSD 50HD47506WFL 6HD47554WL 6HD48072CW-DC 27HD50014-3SP 5HD50014-3WFL 5HD50060R 17
HD50060Y 17HD50095G 52HD50118RY-L 46HD50118RY-L2 46HD50118RY-R 46HD50118RY-R2 47HD50118YY-L 46HD50118YY-L2 47HD50118YY-R 46HD50118YY-R2 47HD52609-3WFL 6HD53009SMDY 45HD53009SMDYC 45HD55009-3WFL 6HD57007WSD 25HD57011WSD 25HD57015WSD 25HD57018WSD 25HD57033RSDM 18HD57039RSDM 18HD60010R-3 40HD60010RSD 15HD60010WSD 21HD60010Y-3 40HD60010YSD 15HD60013RCSDM 15HD60015RSD 16HD60018YSD 19HD60020R 40HD60020Y 40HD60021YSD 16HD60027WSD 21HD60027YCSDM 15HD60042R 17HD60042Y 17HD60060R 16HD60060Y 16HD60090CW-DC 27HD60095G 52HD60096PC 52HD60097PC 52HD60804RCSD 43HD60804RSD 43HD60804WCSD 21HD60804YCSD 43HD60804YSD 43HD60813R 43HD60813RC 43HD60813Y 43HD60813YC 43HD62006-3WFL 9HD62006-3WSP 9HD63000CB 53HD63003YCSD 50HD63003YSD 50HD63015YCSD-2 44HD63015YCSD-2CB 44HD63015YCSD-3 44
HD63015YCSD-3CB 44HD63015YSD-2 44HD63015YSD-2CB 44HD63015YSD-3 44HD63015YSD-3CB 44HD63018SMDW-B 22HD63018SMDW-W 22HD63203YCSD 50HD63203YSD 50HD65031YCSD 19HD65031YSD 19HD67018R 59HD67018W 59HD67018Y 59HD68018R 59HD68018W 59HD68018Y 59HD70009BSD 26HD70009GSD 27HD70009RSD 26HD70009WSD 26HD70009YSD 26HD72006-APAD 53HD72006-3WFLFM 9HD72006-3WSPFM 9HD83019TR 18HD83031TR 18HD89009SMDR 59HD89009SMDW 59HD89009SMDY 59HD90009SMDR 59HD90009SMDW 59HD90009SMDY 59HD92109W-3A 56HD92109W-3B 56HD92109W-3G 56HD92109W-3P 56HD92109W-3R 56HD92109W-3W 56HDD405DSP 62HDD408DSP 62HDDSPB1 60HDDSPB2 60HDDSPB3 60
HDDSPB4 60HDDSPB5 61HDDSPB6 61HDDSPB7 61HDDSPB8 61HDF03054 54HDF03055 54HDF03056 54HDF03057 54HDF03058 55HDF03083 55HDF03084 55HDLC-2307 62HDLC1-12-2A 62HDTS06-2S6 51
P.O. Box 82268 Portland, OR 97282USA
Telephone: 503 233 0008Toll Free: 1 877 238 0008Fax : 503 233 [email protected]
Please visit us online atHeavyDutyLighting.com
Distributed by:
VER0117A