L.E.D.TM

SU Marker Posts - Safety Equipment - Delineators

™ SOLAR MK-6

DESCRIPTION MK-6 markers are a self concealed L.E.D. marker for all types of roadways such as rotaries, dangerous curbs, toll booths, borders, approaching pedestrian passageways, highway ex-its and intersections.

MK-6 Markers stand apart from classic road markings by uti-lizing solar energy as its power source and having the sim-plicity to choose how bright the marker should be and how it flashes, even if a sustained burn is required.

BENEFITS Low tension 0.4 watt, 1 watt and 3 watt LED markers are visible from 360° which is ideally suited for round about markings providing absolute day & night time visibility.

Other applications: Airports Bus Stops Railways Parks Dockyards Pedestrian & Leisure Areas Ships Industrial pathways Landscaping Driveways Loading docs

Illuminate roundabouts & dangerous curbs with absolute visibility

Curb Lighting Wall lighting Day & Night visibility

For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com

TECHNICAL Function power: 12 or 24 watt Low tension cable with a “Clip and Go” connecting sys-tem in which no specific tooling is required.

MK-6 markers function either in auto synchronized flash mode or continuous mode working proficiently in sunny areas as well as in darker areas.

A safe solution to urban lighting installations in case of breakdown.

Available light sensor technology for automatic functioning.

Long term applications MK-6 technology is protected inside a toughened glass shell offering outstanding L.E.D. long term light transmission and exceptional wear resistance designed to adapt and respond to the future demands of illuminating road marking technology.

Power MK-6 markers can be independently powered using a central solar energy power system using panels and ac-cumulators. Alternatively a direct hard wire to on site power source may be used

MK-6 markers are an excel-lent solution to green long term road illumination technology

Resists 16 tons

Life span 100,000 hours

12 or 24 volts BENEFITSSelf illuminating

EstheticAudible noise warning

All applications

•

•

•

•

••

•

CHARACTERISTICS

For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com

MK-6 Installation on concrete barriers

Technical™

SOLAR MK-6

INSTALLATIONRecommended installation :

1 Coring the concrete barrier ¾” deep x 4¾” wide (20mm x 120 mm of diameter)

2 Drilling 1 “ diameter at the core center and piercing the concrete barrier. (25mm)

3 Connect the stud to the supply cable which is set behind the concrete barrier.

4 The central power can be provided by a solar panel or by connecting to a local power source

rete barriers

Technical data• MK6 Toughened glass shell

• LED Quantity 1 LED

• LED Color Most all colors available

• Lifespan 100 000 hours

• Light power available

0.4 watt

1 watt

3 watts

• Mechanical resistance > 16 tons

• Power Function: 12 or 24 Volts

• Power

It is necessary to have a central power supply: Solar or local power source

Each stud must be connected to the sup-ply cable.

• Installation Embedding into surface by core drilling

• Diameter of drilling ¾” x 4¾” in depth (120mm x 25mm)

• Recommended glue Epoxy resin

• Recommended distances between each stud

Superior to 6 Yards on exit highway

Superior to 6 yards on roundabouts

Superior to 13 yards on dangerous turns

• Studs connection Quick clip connection system (without any specific tooling)

TM

SU Marker Posts - Safety Equipment - Delineators