Learning Foundation Paper Piecing Lesson #2

Block finishes to 6x6 inches

To share on social media, tag #PatternsbyShaley or @PatternsByShaley

For questions and concerns, or to share your finished product without social media, contact PatternsByShaley@yahoo.com

Learning Foundation Paper Piecing Lesson #2

Assembly Instructions PRINT • When printing the PDF, be sure to choose to print with "Actual Size" or scale to

100%. • Check that your pattern printed to size using the 1" test squarePREPARE • Use pages 5 & 6 to plan your colors and to help you label each section of the pattern• Cut out each section leaving a little excess around the dotted 1/4" seam lines. • For sections that span multiple pieces of paper, carefully attach separate pieces

using glue or tape. Cut the margin from one page, and lay it on top of the other part of the section. It is important that you are as precise as possible during this step.

• After piecing each section, use a rotary cutter and ruler to trim the section along the dotted 1/4" seam line.

ASSEMBLE • Carefully assemble the sections in the following order. Be sure the corners and lines

match up exactly using straight pins1. A to B

For more from Shaley: Website: https://linktr.ee/patternsbyshaley Instagram: @PatternsByShaley

Pattern for "Unnamed" as 6.000 by 6.000 (inches) block in EQ8 Project "De-Stashed in Love.PJ8" printed from EQ8! 11/23/2019

Pattern for "Unnamed" as 6.000 by 6.000 (inches) block in EQ8 Project "De-Stashed in Love.PJ8" printed from EQ8! 11/23/2019

1” Test

Square

B1

B2B3

B4

B5

B6

B7

B8

B9B10

B11

A1

A2A3

A4

A5

A6

A7

A8

A9A10

A11

Learn Foundation Paper PiecingLesson #2 Pattern