ldpe products – tehnical information. 1 ldpe grades
TRANSCRIPT
![Page 1: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/1.jpg)
LDPE PRODUCTS – TEHNICAL INFORMATION
![Page 2: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/2.jpg)
2
LDPE GRADES
CHARACTERISTICS ASPECTMFI
[g/ 10min]DENSITY[g/ cm3]
SLIP & ANTIBLOCKING
AGENTANTIOXIDANT APLICATIONS
GRADE VISUAL ASTM D1238 ASTM D792
B22/ 0.25 0.25 0.92 *Heat shrinkable film with antioxidative stabilization
B20/ 0.3 0.3 0.92 Extra heavy- duty bags
B21/ 0.5 0.5 0.92 *Film for liquid packaging, co-
extrusion filmB22/ 0.7 0.7 0.92 * Agricultural filmB22/ 1 1 0.92 * Agricultural film
B20/ 2 2 0.92Film for fine packaging with good
transparency
B21/ 2 2 0.92 *Film for fine packaging with good
transparency
B20/ 3 3 0.92Film for extrafine packaging with
good transparency and gloss
B21/ 3 3 0.92 *Film for extrafine packaging with
good transparency and gloss
Uniform
colo
r gra
nule
s w
ithout
extr
aneous
matt
er.
A
re a
llow
ed m
ax.
0.0
1%
m/m
co
nta
min
ants
(o
xid
izes
and
oth
er
defe
cts)
![Page 3: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/3.jpg)
3
LDPE – B20/0.3
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 0,3 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A –50°C/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
20
18
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
350
450
ISO 527/3
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer without stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APPLICATIONS: extrusion, for blown film, extra heavy-duty bags.
![Page 4: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/4.jpg)
4
LDPE – B22/0.25
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 0,25 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
20
18
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
350
450
ISO 527/3
1) PRODUCT DESCRIPTION: low density polyethylene, homopolymer with antioxidant stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APPLICATIONS: extrusion, shrink film.
![Page 5: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/5.jpg)
5
LDPE – 21/0.5
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 0,5 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
18
15
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
300
400
ISO 527/3
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer with slip and antiblocking agent stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APPLICATIONS: extrusion, film for liquid packaging, co-extrusion film.
![Page 6: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/6.jpg)
6
LDPE – B22/0.7
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 0,7 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
18
15
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
300
400
ISO 527/3
HAZE % 13 ASTM D1003
1) PRODUCT DESCRIPTION: low density polyethylene, homopolymer with antioxidant stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APLICATIONS: extrusion, agriculture film, and protection film.
![Page 7: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/7.jpg)
7
LDPE – B22/1
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 1 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
18
15
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
300
400
ISO 527/3
HAZE % 13 ASTM D1003
1) PRODUCT DESCRIPTION: low density polyethylene, homopolymer with antioxidant stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APLICATIONS: extrusion, agriculture film, and protection film.
![Page 8: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/8.jpg)
8
LDPE – B21/2
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 2 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
15
13
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
250
350
ISO 527/3
HAZE % 8 ASTM D1003
GLOSS, 450 UL 60 ASTM D2547
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer with slip and antiblocking agent stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APPLICATIONS: extrusion, film for fine packaging with a good transparency.
![Page 9: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/9.jpg)
9
LDPE – B20/2
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 2 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
15
13
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
250
350
ISO 527/3
HAZE % 8 ASTM D1003
GLOSS, 450 UL 60 ASTM D2547
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer without stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APPLICATIONS: extrusion, film for fine packaging with a good transparency.
![Page 10: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/10.jpg)
10
LDPE – B20/3
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 3 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
15
13
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
250
350
ISO 527/3
HAZE % 7 ASTM D1003
GLOSS, 450 UL 60 ASTM D2547
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer without stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APPLICATIONS: extrusion, film for fine packaging with a very good transparency and gloss.
![Page 11: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/11.jpg)
11
LDPE – B21/3
PROPERTIES MU VALUE TEST METHOD
APPEARANCE Uniform color granules, without extraneous matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
MELT FLOW INDEX
(190 oC / 2.16 kg)
g/10min 3 ASTM D1238
DENSITY (23 oC) g/cm3 0,92 ASTM D792
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
0C 100 ISO 306/A
TENSILE STRENGHT AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
MPa
15
13
ISO 527/3
ELONGATION AT BREAK
(23 oC, v=500mm/min)
Machine direction
Cross direction
%
250
350
ISO 527/3
HAZE % 7 ASTM D1003
GLOSS, 450 UL 60 ASTM D2547
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer with slip and antiblocking agent stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.2) APPLICATIONS: extrusion, film for extra fine packaging with a very good transparency and gloss
![Page 12: LDPE PRODUCTS – TEHNICAL INFORMATION. 1 LDPE GRADES](https://reader036.vdocuments.mx/reader036/viewer/2022082406/5513f6b255034679748b5eb7/html5/thumbnails/12.jpg)
12
Thank You !
http://epetrochemicals.rompetrol.com/