lcd qvga color ac and dc maxi fuse · czone™ is what you want in a digital control system...

3LEADING ELECTRICAL DESIGN

New Products

NEW

Wireless Remote Control

Wireless control of onboard systems, page 47

CZone Innovative,

network control & monitoring

system, page 4

LCD QVGA Color AC and DC Systems MonitorsThe next generation in systems monitoring, page 28 and 29

Panel ConfiguratorCreate, design and modify a custom control panel online at www.bepmarine.com, page 27

Maxi Fuse Holder

An economical maxi fuse holder,

page 67

4 LEADING ELECTRICAL DESIGN LEADING ELECTRICAL DESIGN

TRADITIoNAL ELECTRICAL DC WIRINGWiring DC systems can be complex and installation time can be extensive. The larger the system, the more wire is required, which creates weight and space concerns, not to mention increased cost and complexity of design and manufacturing. Basic maintenance and trouble shooting of traditional wiring systems can be difficult to manage.

• Switch panel wiring is complicated and extremely labor intensive to install

• Cable runs are long and have multiple conductors. Switching of common circuits is complex

• Long wire runs require larger cable, adding weight, increasing cost and reducing space

MAIN DC CIRCUITBREAKER PANEL

BATTERY BANK

ZONE ONE ZONE TWO ZONE THREE ZONE FOUR

DIMMER

TIMER

ZONE FIVE

SWITCH CLUSTER

LIGHT

BATTERYDISTRIBUTIONPANEL

NEGATIVE DISTRIBUTION BAR

SWITCH CONTROL FOR LIGHT ONE

LIGHT

FAN

WATER PUMP

TELEVISION

STEREO

INSTALLATIoNBuilders recognize an immediate benefit with reductions in cable usage, harness weights and installation times. CZone™ also integrates many stand alone components into one intuitive system. Wiring is dramatically simplified, CZone™ is designed to remove complex switching clusters and wiring runs. Integrated diagnostics ensures fault finding is simple. CZone™ is the digital networking system that is both cost-effective and scalable. Modules can easily be added into the system to best suit the OEM and end-users’ needs.

CoNFIGuRATIoNWe provide the tools to help you determine the modules needed based on your specific requirements. Then, simply program with the CZone™ intuitive configuration tool.

CZone™ Networ k Contro l and Moni tor ing Sys tem

CZone™ is what you want in a digital control system designed for manufacturers and installers of Marine, RV and Specialty Vehicles. It simplifies installation of electrical systems through the replacement of complicated, cumbersome wiring to switch and fuse panels, with state of the art, robust interfaces and light NMEA 2000 network cable. It also provides the the end user a sophisticated solution through the automation of complicated control and monitoring issues associated with today’s on board systems.

NEW

TM

LEADING ELECTRICAL DESIGN 5LEADING ELECTRICAL DESIGN

CZone™ decentralizes the DC power distribution system, locates circuit control and protection modules closer to loads to shorten cable runs and reduce the size of conductors, significantly decreasing the cost and weight of the electrical wiring harness. The system replaces complex wiring with a single data wire.

CZone™ DC WIRING

• Complex switch panel wiring removed, replaced with single data cable connection

• The grouping of multiple loads into common areas (Zones) with Output Interfaces is the key to the CZone™ system

• Heavy duty battery mains cable, replaced by multiple smaller conductors

BATTERY BANK

ZONE ONE ZONE TWO ZONE THREE ZONE FOUR ZONE FIVE

SWITCH CLUSTER

BATTERYDISTRIBUTIONPANEL

NEGATIVE DISTRIBUTION BAR NEGATIVE

DISTRIBUTION BAR

Switch control for light one

NMEA 2000 Network

NMEA 2000 Network

SWITCH CONTROL INTERFACE

Signal Interface

NMEA T-Connector

NMEA 2000 NETWORK

SIGNAL INTERFACE

NMEA T-CONNECTOR

SWITCH CONTROL FOR LIGHT ONE

LIGHT

LIGHT

FAN

WATER PUMP

TELEVISION

STEREO

OUPUT INTERFACE

INTEGRATIoNCZone™ is NMEA 2000 compliant and uses the standard Micro cables and connectors. Being NMEA 2000 compliant you can have trust in the netwoork. This also allows a single network backbone to be installed for multiple systems (CZone™ and other NMEA 2000 devices). Aditionally, CZone™ can share certain monitoring functions with other NMEA 2000 compliant screens.

VERSATILITy & SECuRITyCZone™, designed for 9-32V systems, features built-in timers, dimmers (including support for halogen lighting), alarms, voltage reducers and load shedding. With safety in mind, CZone™ features a manual bypass. Our No-Single-Failure-Point technology ensures a plug-n-play system that is designed to handle mishaps. If a module is damaged, the system will automatically program the replacement module, when it is plugged in. This means any module can be replaced without using high tech service people. Our security features allow custom configurations that can be locked.


TM

NEW


The CZone™ Display Interface (DI) is the interface between the CZone™ network and the user. It offers full control of circuits as well as the ability to view important on board systems information such as tank levels and power levels (for both AC and DC supplies), it also provides audiable and visual alarms with systems diagnostics. The DI is extremely intuitive to use with simple controls and a menu structure that is easy to follow.The “modes of operation” feature allows the control of multiple circuits with a single push of a button. For instance, “night running” mode turns pre-selected lights on to dim levels. These modes are all user configurable. The DI can be used to set CZone™ parameters for initial installation and future system maintenance.

DISPLAy INTERFACE

GENERAL SPECIFICATIoNS:

• 3.5” Transflective QVGA LCD

• IpX7 water ingress Protection

• Rotary Knob for easy menu navigation

• Simple User Interface

• Power consumption @12V: 180mA (standby 130mA)

• H 105mm (4”3/32) x W165mm (6”7/16) x D 62mm (2”13/32)

PoWER CoNTRoL:

• Turn circuits on and off including timer and light dimming control (see opposite page for detail)

MoNIToRING:

DC PoWER METER:

• Displays voltages of multiple battery banks, includes low and high voltage alarms

• Displays charge and discharge (amps) of multiple battery banks

• Displays battery capacity in ampere hours and % charge/discharge, includes low ampere hour alarm

AC PoWER METER:

• Displays multiple line voltages (230 and 110V), includes high and low voltage alarm

• Displays AC line frequencies, includes high and low frequency alarm and AC power consumption in kW

TANK LEVELS:

• View tank level information for multiple tanks and fluid types

DATA:

• Displays standard NMEA 2000 information

ALARMS/DIAGNoSTICS

• CZone™ network status reporting

• Presents alarms for on board faults in audible and Visual form (bilge pump running, smoke alarm)

SET MoDES oF oPERATIoN

CoNTRoL: Breaks down the circuits into easy to identify groups for quick control, ie., to turn on fresh water pump open “pumps” group. User can open pumps group and select fresh water pump. This screen also allows the user to monitor the status of the circuit ie on, off, fault and current draw.

MoNIToRING: Allows user to easily monitor AC and DC power, tanks, data, alarms, and circuit status.


TM


The Display Interface is designed with both the manufacturer and end-user in mind. The easy to use display screen puts the control of all components directly at your fingertips. Multiple Display Interfaces can be used in the same system. The scroll and click interface is simple to use in the roughest of seas or bumpiest of roads. Installation is simple, bringing all the power of the DI to an area with the simple addition of a power and network cable.

DISPLAy INTERFACE

SETTINGS: Allows OEM or technician access to the configuration (via password) of a system. No need for computer to set or change configuration settings such as circuit labels, circuit breaker sizes, etc.

MoDES: Key to the ease of operation. With one key press, user can turn on a group of circuits, without having to scroll, search for, and turn on the individual circuits that they need for operation of their vessel/vehicle. When leaving vessel or vehicle, simply press “systems off” to turn off all non-essential circuits. Entertainment mode allows preset activation of salon lights, music etc... All functions can be controlled remotely with CZone™ remote.

2- pin Power Connector NMEA 2000 Connector

PART# DESCRIPTIoN80-911-0001-00 Display Interface, w/power cable, black bezel

80-911-0002-00 Display Interface, w/power cable, grey bezel

80-911-0003-00 Display Interface only, black

80-911-0004-00 Display Interface only, grey


TM


SWITCH CoNTRoL INTERFACE

The Switch Control Interface (SCI) provides an interface between the CZone™ network and traditional mechanical switches that manufacturers and users are familiar with. This interface converts the signal from those switches into the Control Area Network (CAN) signal needed across a digital network. No need to change existing designs.

Diagnostics are important. Fault codes are provided to quickly identify issues with the network or switches. Information is provided on the Switch Control Interface as well as sent to the CZone™ Display Interface.

The SCI simplifies your wiring, supports your existing choice of switches, protects against failures and allows for expanding installation options.

Backlighting and systems in operation lights are dimmable to ensure your night vision is not impared by bright lights on your control area, level control of these can be linked to the backlighting level of any Display Interfaces in close proximity of the SCI.


• Single switch position can control multiple OI channels

• Attaches to switch panels via custom SCI cable

• Multiple SCI switches can control single OI channel

• Output for backlighting of switch labels (dimmable)

• Outputs systems on and function/ fault codes to systems on LED of switches (dimmable)

• H 100mm (3”29/ 32) x W156mm (6”3/ 32) x D 42mm (1”5/ 8)

• IPX5 water ingress protection

• Programmable switch types

• 8 inputs per module (16 individual controls)

• Sequential button press functionality

8-Way Connector Bank for SCI Cable Assembly to Switches

Waterproof Cable Seal

PART# DESCRIPTIoN80-911-0011-00 Switch Control Interface w/seal

80-911-0012-00 Switch Control Interface only

NMEA 2000 Connector


TM


The Signal Interface (SI) connects CZone™ to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input. For example, the SI can be easily programmed to allow a fluid transfer pump and an alarm to turn on simultaneously when the SI detects that a low tank level has been reached.

Connect standard switches to the SI to allow control of CZone™ outputs.

The module provides LED status indications for each input. This allows fast diagnostics while providing information back to CZone™’s Display Interface.

SIGNAL INTERFACE


• Accepts inputs from traditional switch types being used to control outputs

• Accepts inputs from switches to trigger alarm i.e. high water float switch

• Accepts inputs from industry standard tank senders (0-5V, 10-180Ohm, 240-33Ohm)”

• Accepts inputs from general voltaic or resistive signals can be used for controlling outputs or to display a physical position i.e. show a hatch is partially open

• LED status indicators for each input

• H 100mm (3”29/32) x W156mm (6”3/32) x D 42mm (1”5/8)


CAN Network Status Indicator

Signal

Status

Indicator

PART# DESCRIPTIoN80-911-0013-00 Signal Interface w/seals, connector

80-911-0014-00 Signal Interface only

NMEA 2000 ConnectorWaterproof Cable Seal

Terminal Block


TM


PART# DESCRIPTIoN80-911-0005-00 Meter Interface, w/seal & plug

80-911-0006-00 Meter Interface only

METER INTERFACE

The Meter Interface (MI) accepts inputs from external AC and DC power metering sensors. It then processes and converts the analog signals into digital strings that can then be presented, by the display, to the user, as one of several, easy-to-understand formats such as:

AC and DC voltage and amps

AC Kilowatts

DC battery capacity in amp hours and % remaining

All with user definable high and low alarms

Intelligence is built into CZone™. The MI can calculate the battery capacity as ampere hours and/or percentage of charge remaining. Since CZone™ provides both monitoring and control for DC systems, it can be configured to turn off non-essential circuits in the event that the battery is discharged to a low level. This helps to ensure that there is enough charge left in the battery to power safety critical circuits.

Network

Status Indicator

DC Voltage

Indicator

AC Voltage

Indicator

Terminal Block

NMEA 2000 ConnectorWaterproof Cable Seal


AC

• 3 x AC voltage inputs (multi voltage)

• 2 x AC current inputs

• Calculates true RMS power

• Ignition protected

DC

• 3 x DC voltage inputs (multi voltage)

• 2 x DC current inputs

• Calculates battery capacity as Ampere hours and percentage charge remaining

• Resolution for current metering down to 0.1A

GENERAL

• H 100mm (3”29/32) x W156mm (6”3/32) x D 42mm (1”5/8)


Note: High and low alarm levels can be set for all inputs


TM


DC Positive Feed

ouTPuT INTERFACE

The Output Interface (OI) provides an intelligent replacement for traditional circuit breaker and fuse panels. It has 6x high power, robust output channels which provide the power supply, control and fusing for a circuit as well as integrating many other built in features such as timers and dimmers.

The OI is behind the CZone™ concept of decentralising the power distribution, compared to a traditional electrical layouts which are typically based around a large, centralised circuit breaker or fuse panel. The OI’s allow the installer to move the circuit control and protection closer to the loads which significantly shortens cable runs and reduces the size of the conductors. This equates to a reduction in the cost and weight of the electrical wiring harness, ie. less copper.

Connection to the unit is simple: a large 6 way plug allows connections to cables of up to 16mm2 (6AWG) in size, or multiple smaller conductors. No need for specialised crimp terminals and expensive crimp tools to be carried for terminations to CZone™, just a blade screwdriver. A protective flexible boot offers protection to the connections from harsh environment conditions.

Fuses For Emergency

Circuit Bypass

Circuit Status

Indicator

Connector & Protective Boot

Circuit ID Label

PART# DESCRIPTIoN80-911-0009-00 Output interface w/connector, boot

80-911-0010-00 Output interface only

NMEA 2000 Connector


• 4 levels of backup fusing including manual override (as required by ABYC)

• 6 x 20 amp circuits

• Programmable software “fuse” sizes

• Multiple channels can be bridged together to offer higher current switching

• Small, non metallic, easy to install case


• Dimensions: H 128mm (5”) x W200mm (7”29/32) x D 45mm (1”3/4)

• Power consumption @12V: 85mA (standby 60mA)


TM


MoToR ouTPuT INTERFACE

The Motor Output Interface (MOI) has an output pair for controlling DC motors which require a reversal of polarity to change the direction of their mechanical operation. For example, a DC motor for an electric window mechanism will move the window up or down depending on the polarity of the feed to the motor.

Historically the wiring and control circuitry for such installations is complicated and requires a number of individual components, often controls for these devices are mounted remotely to the motor so wiring runs can be long. the MOI replaces all of these devices with one simple solution that can be mounted close to the motor further reducing cable runs.

The MOI can be configured to deliver a “soft start” so that motor driven devices don’t start with a sudden and abrupt motion.

The MOI also incorporates two standard output channels such as is found on the OI.

Network Status

indicator

Reverse Polarity

Indicator

Fuses For

Emergency

Circuit Bypass

PART# DESCRIPTIoN80-911-0007-00 Motor Output Interface w/connector, boot

80-911-0008-00 Motor Output Interface only

Connector & Protective Boot


• Single motor control and two normal channels per unit, 20A per output

• Built In circuit protection


• Dimensions: H 128mm (5”) x W200mm (7”29/32) x D 45mm (1”3/4)

NMEA 2000 Connector


TM


CoNFIGuRATIoN MADE EASyHistorically, generating a configuration for and programming a system is a chore that requires a significant amount of training. The CZone™’s configuration tool offers simple, straightforward programming that is easy to learn and to use.

The CZone™ Configuration Tool allows the manufacturer to set up programming parameters on a standard PC, (use USB CAN Adapter# 80-911-0044-00) upload a saved configuration into the CZone™ network and simultaneously program every interface on-board. Changes and customizations can also be made from the Display Interface and downloaded back to the PC overriding the master configuration. The master template file is now ready to go and can be used on multiple vessels or vehicles during manufacturing.


TM


CZone™ ACCESSoRIES

Power Cable for Display Interface, 2 Pin, 2 meters# 80-911-0032-00 6.5 ft 2 meters

NMEA 2000 Ext. Cable# 80-911-0024-00 15 ft 4.57meters# 80-911-0025-00 25 ft 7.62 meters# 80-911-0026-00 2 ft .61 meters# 80-911-0027-00 6 ft 1.82 meters

NMEA 2000 Power Cable# 80-911-0028-00 3.2 ft 1 meter

NMEA 2000 T-Piece

# 80-911-0029-00

uSB CAN Adapter

# 80-911-0044-00

• Connects PC to the CZONE network for configuration and system set up

AC-VSEN-4The AC-VSEN-4 includes 3 voltage transformers for up to 3 voltage inputs.

Dimensions: 69 x 140 x 50 mm (2.75 x 5.5 x 2 in)

CT-10-3Dimensions: 37.5 x 39.2 x 13.7 mm (1.5 x 1.55 x .55 in)

Hole size: 12 mm (0.5”)

CT-HDCT-HD is available for systems with large mains cables, too large for CT-10-3 (ordered separately).

CT-HD dimensions: Ø 47 x 10.5 mm (Ø 1.85 x 0.4 in)

Hole size: 32 mm (1.25 in)

CZone™ Wireless Remote Kit

#80-911-0045-00

• A simple to set up, wireless remote control

• Configure the buttons to operate Individual circuits or to control multiple circuits through a mode of operation


TM


CZone™ ACCESSoRIES

Seal Boot for oI/MoI , 6-Wire, Blk Silicon

# 80-911-0034-00

NMEA 2000 Resistors

# 80-911-0030-00 Female

# 80-911-0031-00 MaleCustom Switches # 80-911-0037-00 ON/OFF# 80-911-0038-00 mom ON/OFF# 80-911-0039-00 ON/OFF/ON# 80-911-0040-00 mom ON/OFF/mom ON

Cable Assembly, SCIto suit Switches below# 80-911-0018-00 .5 meter# 80-911-0019-00 1 meter# 80-911-0020-00 2 meter# 80-911-0021-00 3 meter# 80-911-0022-00 4 meter# 80-911-0023-00 5 meter

Cable Gland, MI Blk Silicon# 80-911-0033-00

Cable Gland for SCI Blk Silicon# 80-911-0035-00

Cable Gland, SI, Blk Silicon# 80-911-0036-00

Hole Plugs, Blk# 80-911-0016-00 3.2mm# 80-911-0017-00 5 mm 3.2mm for MI and SI cable glands5mm for SCI cable glands

Terminal Block, OI/MOI, 6W

# 80-911-0041-00

Terminal Block for MI, 6 Way

# 80-911-0042-00

Terminal Block, SI/MI 8W

# 80-911-0043-00


TM


Range HigHligHts

� Red systems on LED

� Marine grade powder coated aluminium

� ABYC standard voltage indication

� Green LED backlit labels

� Airpax Circuit Breakers

� Stylish clip on contour fascia

� Label sets and buss bar supplied with panels; for additional labels see pages 71 and 72

Circuit Breaker PanelsDC no meter s

DC Control Panels - No Meters, 12 VPart No. mm

H x W x 65

in

H x W x 2.5

Label Sheet

CB's - Single Pole Neg Bus5 10 15 20 25 30

900 115 x 127 4.5 x 5 1 1 2 1 6 way901H 115 x 239 4.5 x 9.75 " 2 2 3 1 "901V 200 x 127 7.9 x 5 " 2 2 3 1 "902NMH 115 x 351 4.5 x 13.9 " 3 4 4 1 "902NMV 285 x 127 11.25 x 5 " 3 4 4 1 "904NM 200 x 239 7.9 x 9.75 " 4 5 5 1 1 12 way904NMH 115 x 463 4.5 x 18.25 " 4 5 5 1 1 "904NMV 370 x 127 14.6 x 5 " 4 5 5 1 1 "905NM 200 x 351 7.9 x 13.9 1 - 3 5 8 8 1 1 1 "905NMV 285 x 239 11.25 x 9.75 " 5 8 8 1 1 1 "906NMH 200 x 463 7.9 x 18.25 1 - 4 7 11 11 1 1 1 24 way906NMV 370 x 239 14.6 x 9.75 " 7 11 11 1 1 1 "NC36NM 285 x 351 11.25 x 13.9 1 - 4, 6 8 12 12 2 1 1 "

Cutout size - 10 mm (3/8 in) inside all external edges

All panels available in 12 or 24 V configuration. All part numbers shown are 12 V backlighting. If 24 V is required, please specify when ordering.

900

902NMV

902NMH

904NMV

904NM

901V

901H


Circuit Breaker PanelsDC no meter s

NC36NM

905NM

906NMH

904NMH

905NMV

906NMV


Circuit Breaker PanelsDC ana log /d ig i t a l meter s

DC Control Panels - Digital MetersPart No. mm

L x W x 65

in

H x W x 2.5

Label Sheet


900D 200 x 127 7.9 x 5 1 1 2 1 6 way901DV 295 x 127 11.6 x 5 " 2 2 3 1 "902D 200 x 239 7.1 x 9.75 " 3 4 4 1 "902DV 380 x 127 15 x 5 " 3 4 4 1 "903D 200 x 351 7.9 x 9.75 1 - 3 5 6 7 1 1 12 way904D 295 x 239 11.6 x 9.75 1 - 2 4 5 5 1 1 "905D 295 x 351 11.6 x 13.9 1 - 3 5 8 8 1 1 1 "905DV 380 x 239 15 x 9.75 " 5 8 8 1 1 1 "906D 295 x 463 11.6 x 18.25 1 - 4 7 11 11 1 1 1 24 way906DV 455 x 239 18 x 9.75 " 7 11 11 1 1 1 "907D-24V 380 x 463 15 x 18.25 1 - 5 12 15 15 3 1 2 2 x 24 way

900A

904A-12V

903D

905A-12V 905DV

902A-12V

901DV

902DV


Range HigHligHts

� Ammeters available in other scales (page 26).

� All panels are available with either Analog or Digital meters

� Label set and bus bar supplied with panel; for additional label sets see pages 71 and 72

DC Control Panels - Analog MetersPart No. mm

H x W x 65

in

H x W x 2.5

Label Sheet


900A 200 x 127 7.9 x 5 1 1 2 1 6 way901AV-12V 295 x 127 11.6 x 5 " 2 2 3 1 "902A-12V 200 x 239 7.9 x 9.75 " 3 4 4 1 "902AV-12V 380 x 127 15 x 5 " 3 4 4 1 "903A 200 x 351 7.9 x 9.75 1 - 3 5 6 7 1 1 12 way904A-12V 295 x 239 11.6 x 9.75 1 - 2 4 5 5 1 1 "905A-12V 295 x 351 11.6 x 13.9 1 - 3 5 8 8 1 1 1 "905AV 380 x 239 15 x 9.75 " 5 8 8 1 1 1 "906A 295 x 463 11.6 x 18.25 1 - 4 7 11 11 1 1 1 24 way906AV 455 x 239 18 x 9.75 " 7 11 11 1 1 1 "907A 380 x 463 15 x 18.25 1 - 5 12 15 15 3 1 2 2 x 24 way

All analog panels supplied with one shunt, extra shunts ordered separately. Digital panels supplied with 450 A-50mV shunt.


All panels available in 12 or 24 V configuration. All part numbers shown are 12 V backlighting. If 24 V is required, please specify when ordering.

Circuit Breaker PanelsDC ana log /d ig i t a l meter s

907A

906AV

906A


Circui t Breaker Pane lsCruiser Ser ies

Range HigHligHts

� Mimic panel for quick reference of systems in operation

� Blank space for addition of extra meter eg: tank monitor

� Digital or analog readouts

DC Control Panels - Cruiser Series, 24 Way, 12 VPart No. mm

H x W x 65

in

H x W x 2.5

Label Sheet CB's - Single Pole Meter5 10 15 20 25 30

NC32YD 380 x 351 15 x 13.9 1 - 4, 6 7 11 11 1 1 1 DigitalNC36LD 380 x 351 15 x 13.9 " 8 12 12 2 1 1 DigitalNC32YA 380 x 351 15 x 13.9 " 7 11 11 1 1 1 AnalogNC36LA 380 x 351 15 x 13.9 " 8 12 12 2 1 1 Analog

All analog panels supplied with one shunt, extra shunts ordered separately. Digital panels supplied with 450A – 50mV shunt.


All panels available in 12 or 24 V configuration. If 24 V is required, please spcify when ordering,

Range HigHligHts - DP Panel

� Double pole panels available in all panel sizes.

� Double pole CBs use twice the space of single pole breakers; an 8-way panel can become a 4-way

� AC or DC versions available

� Single toggle

NC36LD NC32yD

DP PANEL


Circui t Breaker Pane lsMil len ium Ser ies

Range HigHligHts - MillenniuM Range

� Compact sizing

� Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amps and amp-hours remaining on main battery bank (see 600-DCM page 30)

DC Control Panels - Millennium Range, 24 Way, 12 VPart No. mm

H x W x 65

in

H x W x 2.5

Label Sheet

CB's - Single Pole Meter5 10 15 20 25 30

M28D 370 x 239 14.6 x 9.75 1 - 4 8 8 8 2 2 DigitalM32D 285 x 351 11.25 x 13.9 1 - 4, 6 7 11 11 1 1 1 "M44D 370 x 351 14.6 x 13.9 " 10 14 14 3 1 2 "M44DH 285 x 463 11.25 x 18.25 " 10 14 14 3 1 2 "M56D 455 x 351 18 x 13.9 " 12 18 18 4 2 2 "

M44D M28D

M44DH M56D

M32D


AC Circuit Breaker PanelsNo meter s

Range HigHligHts

� Ideal for AC shore power installations and on board inverter installations.

For standard twin input systems, eg: one shore power and one genset input.

AC Control Panels - No MetersPart No. Volts mm

H x W x 65

in

H x W x 2.5

Label Sheet

CB's - Single Pole CB's - Double Pole Neg Bus5 10 15 20 25 30 20 25 30 50 80

900-ACM2WA 230 115 x 239 4.5 x 9.75 5 2 2 2 IS-6MM-2900-AC1-110V 110 115 x 239 4.5 x 9.75 5 2 2 2 IS-6MM-2900-ACM2W 230 115 x 127 4.5 x 5 5 2 1 IS-6MM-2900-ACM2W-110V 110 115 x 127 4.5 x 5 5 2 1 IS-6MM-2900-ACM6W 230 200 x 127 7.9 x 5 5 2 3 1 1 IS-6MM-2900-ACM6W-110V 110 200 x 127 7.9 x 5 5 3 2 1 1 IS-6MM-2900-ACCH 230 115 x 127 7.9 x 5 5 2 IS-6MM-2900-ACCH-110V 110 115 x 127 7.9 x 5 5 2 IS-6MM-2

900-ACM6W

900-ACCH

900-ACM2W

900-AC1

REVERSE PoLARITy AuTo TRIP BREAKER NoW STANDARD on all 230 V, 50 Hz panels (Euro and Asia-Pacific).

This will automatically trip when it detects reverse polarity.

CBS-20A-DP-TC230


Range HigHligHts

� All available in 110 V/60 Hz or 230 V/50 Hz

� All supplied with tranducers

� Reverse polarity indicator

� Double pole mains input CBs with slde lockout

� Digital meter shows volts, amps and frequency

� LED wired to indicate live panel with mains breaker either on or off

� AC source selector ensures no cross over between AC inputs (ship or shore power)

� AC voltage/frequency label to comply with ABYC Standards

AC Circuit Breaker PanelsAnalog /d ig i t a l meter s

AC Control Panels - Analog MetersPart No. Volts mm

H x W x 65

in

H x W x 2.5

Label Sheet

CB's - Single Pole CB's - Double Pole Neg Bus5 10 15 20 25 30 20 25 30 50 80

900-ACMA2W 230 200 x 127 7.9 x 5 5 2 2 IS-6MM-2900-ACMA2W-110V 110 200 x 127 7.9 x 5 5 2 1 IS-6MM-2900-ACM6WA-V 230 295 x 127 11.6 x 5 5 2 3 1 1 IS-6MM-2900-ACM6WA-V-110V 110 295 x 127 11.6 x 5 5 1 3 3 1 1 1 IS-6MM-2900-AC2AH 230 200 x 239 7.9 x 9.75 5 1 3 3 1 1 1 2 x 6 way900-AC2AH-110V 110 200 x 239 7.9 x 9.75 5 2 3 2 1 1 1 2 x 6 way900-AC2AV 230 380 x 127 15 x 5 5 1 3 3 1 1 1 2 x 6 way900-AC2AV-110V 110 380 x 127 15 x 5 5 1 2 3 2 1 1 1 2 x 6 way900-AC3A 230 200 x 351 7.9 x 13.9 5 1 4 5 1 1 1 1 2 x 12 way900-AC3A-110V 110 200 x 351 7.9 x 13.9 5 1 3 4 3 1 1 1 1 2 x 12 way

AC Control Panels - Digital Meters900-AC2DH 230 200 x 239 7.9 x 9.75 5 1 3 3 1 1 1 2 x 6 way900-AC2DH-110V 110 200 x 239 7.9 x 9.75 5 2 3 2 1 1 1 2 x 6 way900-AC2DV 230 380 x 127 15 x 5 5 1 3 3 1 1 1 2 x 6 way900-AC2DV-110V 110 380 x 127 15 x 5 5 1 2 3 2 1 1 1 2 x 6 way900-AC3D 230 200 x 351 7.9 x 13.9 5 1 4 5 1 1 1 1 2 x 12 way900-AC3D-110V 110 200 x 351 7.9 x 13.9 5 1 3 4 3 1 1 1 2 x 6 way900-AC4D 230 200 x 351 7.9 x 13.9 5 1 5 7 2 1 1 1 2 x 6 way900-AC4D-110V 110 200 x 351 7.9 x 13.9 5 5 8 2 1 1 1 2 x 6 way


All panels available in 12 or 24 V backlighting configuration. For 110 V versions add -110V to Part No.

Reverse polarity auto trip breakers are used as standard for shore power mains inputs (230 V AC panels only)

900-AC2DV

900-ACMA2W 900-AC2AH 900-AC4D

900-AC3D

900-ACM6WA-V


AC Circuit Breaker PanelsBack Cover s /RCDs

Range HigHligHts -

We supply two Residual Current Device (RCD) ratings (16 & 32 A). Due to the difference in style of the RCD’s, these panels are made to be mounted separately from the main AC panel.

RCD Panels

Part No. Rating (A) mm

H x W x 65

in

H x W x 2.5900-RCD-16A 16 115 x 127 4.5 x 5900-RCD-1X16-32A 32 115 x 127 4.5 x 5900-RCD-2X16A 16x2 115 x 127 4.5 x 5900-RCD-2X32A 32x2 115 x 127 4.5 x 5900-RCD-32A 16x1, + 32x1 115 x 127 4.5 x 5


CB options

Part No. Rating (A) Type

RCD16A30MA 16 Residual CB Overload

RCD32A30MA 32 Residual CB Overload

RCD63A30MA 63 Residual CB

MCB16A 16 Miniature CB



For installations in Australia and New Zealand to comply with AS/NZ3004 an approved double pole mains circuit breaker must be mounted upstream of the BEP Control Panel in the form of a RCD or MCB. The MCB-3WENC is an enclosure with IP65 rating. The enclosure and CB is ordered separately. The RCD panels above can also be used for this application, however they would have to be mounted in a dry protected position on the vessel.

Dimensions of MCB-3WENC:

160 mm (6.3”) H x

92 mm (3.6”) W x

90 mm (3.5”) D

Range HigHligHts

� Designed to insulate exposed rear terminals

� Flame retardant PVC in two styles

� FLANGE MOUNT: for access to control panel back when mounted in place. Attaches to the rear of the same mounting surface as the panel

� PANEL MOUNT: for access only when panel is removed. Supplied with mounting pedestals

AC Back Panel Covers

Part No. Mount type

Cover description mm

L x W x 90

in

L x W x 3.5BC-FM1 Flange 1 column 8-12 CBs + meter 380 x 127 15 x 5BC-FM2 Flange 2 column 8-12 CBs + meter 380 x 239 15 x 9.4BC-FM3 Flange 1 column 8-12 CBs 285 x 127 15 x 5BC-FM4 Flange 2 column 8-12 CBs 285 x 239 15 x 9.4BC-PM1 Panel 1 column 8-12 CBs + meter 360 x 107 15 x 4.2BC-PM2 Panel 2 column 8-12 CBs + meter 360 x 219 15 x 8.6BC-PM3 Panel 1 column 8-12 CBs 265 x 107 15 x 4.2

BC-FM1

BC-FM2

BC-PM1

BC-PM2

900-RCD-16A

MCB-3WENC RCD (see chart) MCB (see chart)

900-RCD-2X16A


Circuit BreakersTogg les

Range HigHligHts

� Spacing compliance: IEC specification 601, 950; VDE 0804, 0805

� UL recognized; CSA certified; VDE 0660 approved; Part 101 & CE compliant

� Available in single or double pole; triple pole available on special orders

� NoTE: Part numbers shown are all BEP specific and have no reference to the Airpax part number system.

Single Toggle 1-2 & 3 Pole Small Frame

Single pole Rating (A) Double pole Rating (A)

Triple pole / Rating (A)

Rating (A)

CBS-2.5A-SP 2.5 CBS-2.5A-DP 2.5 CBS-30A-TP / 30 30CBS-5A-SP 5 CBS-5A-DP 5 CBS-50A-TP / 50 50CBS-10A-SP 10 CBS-10A-DP 10 D/Pole trip coil Volts (V)CBS-15A-SP 15 CBS-15A-DP 15 CBS-15A-DP-TC230 230CBS-20A-SP 20 CBS-20A-DP 20 CBS-20A-DP-TC230 230CBS-25A-SP 25 CBS-25A-DP 25 CBS-30A-DP-TC230 230CBS-30A-SP 30 CBS-30A-DP 30 CBS-50A-DP-TC230 230CBS-40A-SP 40 CBS-40A-DP 40CBS-50A-SP 50 CBS-50A-DP 50

IEG Magnetic CBs

IEG magnetic circuit breakers provide reliable circuit protection and accurate circuit control for equipment in the international market place.

Designed using the latest in sensitive hydraulic magnetic technology, the IEG line adapts itself to many applications and environments. They are ideal for marine applications, data processing and business

machines, as well as medical instrumentation, broadcast equipment, vending and amusement machines, military applications and wherever precision operation is required. Temperature differences which affect fuses and other thermal devices are not a concern. One important feature of this breaker line is a ‘trip free’ action, which means the circuit will trip in the presence of an overload even though the handle is held in the ON position. The delay mechanism senses the fault and the contacts open.

121-710-1101Image shows “handle lock” as used in all our battery management panels for essential CBs to prevent accidental or unintended actuation of essential circuits CB’s from either the “on” or “off” position. (ordered separately)

Single Toggle 1-2 & 3 Pole Large Frame

Single pole Rating (A) Double pole Rating (A)

Triple pole Rating (A)

CBL-50A-SP 50 CBL-50A-DP 50 CBL-50A-TP 50CBL-60A-SP 60 CBL-60A-DP 60 CBL-80A-TP 80CBL-75A-SP 75 CBL-75A-DP 75 CBL-100A-TP 100CBL-100A-SP 100 CBL-100A-DP 100

IuL Magnetic CBs

provide reliable circuit protection and accurate circuit control for equipment in the international market place. BEP uses the IUL range

of circuit breakers where current requirements exceed 50 A and are within 100 A. Available in single and double pole with triple pole available on special orders.

CBS-50A-SP-IGP

CBL-50A-SP

CBS-50A-DP

CBL-100A-DP

121-710-1101/1


Circuit BreakersHeav y Dut y/Push to Reset

Manual Reset

Part No. Rating (A)

(P)anel mount / (F)lush mount

184060P-01-1 60 P184150P-01-1 150 P184100F-01-1 100 F184150F-01-1 150 F

Switchable Reset

Part No. Rating (A)

(P)anel mount / (F)lush mount

185050P-01-1 50 P185070P-01-1 70 P185080P-01-1 80 P185100P-01-1 100 P185135P-01-1 135 P185150P-01-1 150 P185050F-01-1 50 F185080F-01-1 80 F185100F-01-1 100 F185150F-01-1 150 F

TEMPERATURE DERATING CURVES

TEMERATURE IN DEGREES F.

200%

150%

100%

50%

0%

% O

F R

AT

ED

CU

RR

EN

T

TIME VS. PERCENT OF RATED CURRENT

TIME IN SECONDS0 5 10 15 20 30 40 100 200 500

600%

500%

400%

300%

0%

% O

F R

AT

ED

CU

RR

EN

T

200%

TEMPERATURE DERATING CURVES

TEMERATURE IN DEGREES F.

200%

150%

100%

50%

0%

% O

F R

AT

ED

CU

RR

EN

T

TIME VS. PERCENT OF RATED CURRENT

TIME IN SECONDS0 5 10 15 20 30 40 100 200 500

600%

500%

400%

300%

0%

% O

F R

AT

ED

CU

RR

EN

T

200%

Busmann® Heavy Duty

Single Pole Thermal Type Breakers

Ratings: 50 A to 150 A; 30 V DC, 3000 A interrupt capacity

operating Temperature: -25°F (-32°C) to 180°F (82°C)

Storage Temperature: -30°F (-34°C) to 300°F (149°C)

Applications: Auxiliary and accessory circuits – trucks, buses, RVs and marine applications, battery chargers and DC audio systems. Series 181, 184 & 185 are sealed for engine compartment and bilge area applications.

Housing: Thermoset plastic; UL rated 94VO; 311ºF (155ºC). Stud insulators are provided on covered units with F (Surface Mount) bases

Mounting: Panel or surface

Indicator: Series 184 & 185 have a unique reset mechanism providing visible indication of tripped condition

Approvals: Complies with SAEJ1625

Push To Reset

Part No. Rating (A)CLB-05 5CLB-10 10CLB-15 15CLB-20 20CLB-25 25CLB-30 30CLB-40 40CLB-BOOT BOOT

Carling CLB Series Push Reset Thermal Circuit BreakersSpecifications:

Ratings: 5—40 A; 200 A @ 250 V AC Interrupt Capacity

Operating Temperature: -10—60° C

Interrupting capacity: 2500 A

Ressettable overload capacity: 10 x rated current

Approvals: UL, CUL, TUV, CE, UL1500ISO8846 for ignition protection/marine

184150P-01-1 185100F-01-1

CLB-BooT

CLB-20


Panel Configurator

Panel Configurator

The BEP Panel Configurator is a software program designed for do-it-yourself creation and modification of standard circuit breaker panels. The user friendly software is available to both account and non-account holders.

Designed for the creation and modification of standard panels, the software provides the end user prompt turn around for panel requirements. Additionally, the built-in communication tool allows for customer created drawings to be transferred with ease to BEP customer service for quotation. The use of the software greatly streamlines the entire panel production process – reducing design and modification time, decreasing correspondence and cutting lead time.

To learn more and to download the software, go to www.bepmarine.com.

NEW


Range HigHligHts

Monitors:

� Charge/discharge amps for two banks

� Capacity remaining in A/h and %

� Battery condition

� Tank fluid level

� Circuit status

Features:

� 8 Generic, user configurable inputs

� Programmable high/low audio/visual alarms for volts, amps and tank levels

� Backlit keypad and dimmable screen

� Can be panel or surface mounted

DC Power Meter

� Displays voltages of multiple battery banks (0-32VDC)

� Displays charge and discharge (amps) of 2 battery banks

� Displays battery capacity in amp hours

� High/Low level alarms

Display Type

° Configure the DCSM to show the data in analogue, digital and graphic form

Circuit Status

� View the status of important circuits (on/off )

� In graphic and numeric form

Tank Level

� View tank level information for multiple tanks in numeric and graphic forms. Resetable when leaving boat

Specifications:

� 2.8” Colour QVGA LCD

� Input voltage 8-32VDC

� Dimensions Width 38mm (1.50") x High 40mm (1.57")

� Backlit keypad

80-600-0021-00 (DCSM including 1x shunt and cable)80-600-0022-00 (DCSM excluding shunt)

MonitoringDC Systems Monitor (DCSM)

450A / 50 mV shunt supplied supplied with 80-600-0021-00

83L x 45W x 44H mm

(3.25L x 2.8W x 2.75H in)

Installation Cable Kit

2 core screened cable in

2 lengths pre-terminated.

600-DCM-5M 5 m (16.45") cable

600-DCM-10M 10 m (32.9") cable

LB-450-50600-DCM-5M

The BEP Digital Monitoring System

Designed and manufactured by BEP, these state of the art full color monitors are made to meet the systems monitoring requirements of today’s modern vessel and recreational vehicle. Complex AC and DC electrical installations onboard are becoming more common place.

Additionally the increase in tank monitoring requirements for fuel, fresh, grey and black water, accurate monitoring of these systems is essential.

The DCSM and ACSM displays feature clear, extra large type face. This allows for more detailed on-screen information and increased clarity. The screen has backlighting for easy night time viewing.

NEW


MonitoringAC Systems Monitor (ACSM)

Range HigHligHts

Monitors:

� AC volts, amps and frequency

Features:

� 3 Generic user configurable inputs

� Displays data in analogue, digital and graphic forms

� Output for load shedding

� Programmable high/low audio/visual alarms for each input

AC Power Meter

� Displays AC volts, amps frequency and power for two supplies with a third position for monitoring AC volts and frequency of a third supply

� Displays AC power in kW (true RMS)

AC Volts/Frequency

� Displays AC voltage and frequency, 80-264 Vac 50 & 60 Hz

AC Amps

� Displays Current for 2x AC supplies (0-75A)

Alarms

� High and low alarms for each input

� User selectable alarm levels

� Mutable

The AC-VSEN-4 includes 3 voltage transformers for up to 3 voltage inputs.

Supplied with 80-600-0023-00


One CT-10-3 current transformer is supplied with 600-ACM. If a twin line system is in use, a second CT must be ordered

Supplied with 80-600-0023-00

CT-10-3 dimensions: 37.5 x 39.2 x 13.7 mm (1.5 x 1.55 x .55 in)


CT-HD is available for systems with large mains cables, too large for CT-10-3 (ordered separately).

CT-HD dimensions: Ø 47 x 10.5 mm (Ø 1.85 x 0.4 in)

Hole size: 32 mm (1.25 in)

Specifications:

� 2.8” Colour QVGA LCD

� Input voltage 8-32VDC

� Dimensions Width 38mm (1.50") x High 40mm (1.57")

� Backlit keypad

AC-VSEN-4 CT-10-3 CT-HD

80-600-0023-00 (ACSM) includes 1X AC-VSEN-4 and 2X CT-10-3

NEW


Range HigHligHts

Monitors:

� Volts on up to 3 battery banks

� Amps for charge/discharge (One battery bank only)

� Capacity remaining in A/h and %

� Software uses Peukerts Exponent

� 24-hour bilge pump monitor

Voltage Monitor

� Voltage monitoring for up to 3 battery banks

� 12 custom selectable legends

� Hi /Low voltage alarms on all 3 banks

Amps charge & discharge (on house bank only)

� Meter supplied with a 450-50 mV shunt

� 0.1 A resolution up to 40 A. 1.0 A resolution over 40 A.

Percentage remaining in A/h (on house bank only)

� Software uses Peukerts exponent

� Suitable for use on battery banks from 60 - 3000 A/h

� Low A/h alarm (for remote alarm operation use part no. 54-27C4)

Bilge monitor

� Monitors bilge pump functions 24 hours, 7 days a week. Stores bilge pump operations and accumulated time

� Resetable when leaving boat

(Function only available when third voltmeter position is not used.)

Monitoring

DC

450A / 50 mV shunt supplied with 600-DCM

83L x 45W x 44H mm

(3.25L x 2.8W x 2.75H in)

Installation cable kit ordered separately.

2 core screened cable in

2 lengths pre-terminated.

600-DCM-5M 5 m (16.45") cable

600-DCM-10M 10 m (32.9") cable

Specifications:

� Input voltage 10-35 V DC

� Power consumption 45 mA; power consumption 65 mA (backlighting on)

� Dimensions page 31

The BEP Digital Monitoring System

Designed and manufactured by BEP is made to meet the requirements of modern boating and recreational vehicles. Electrical installations on-board the modern boat now incorporate complex AC & DC systems along with extensive tankage for items such as fuel, fresh water, sewage and grey water.

Accurate monitoring of such systems is essential, as a malfunction in any one of the above areas could cause major damage to expensive equipment and ultimately endanger the vessel or peoples lives. The dot matrix display incorporated in this series allows for more detailed on-screen information and clarity of viewing. The screen has backlighting for easy night time viewing.

600-DCM

LB-450-50600-DCM-5M


Range HigHligHts

� Monitors single or twin line inputs

� Supplied with AC transducer

� Draws 70% less current than equivalent LED screens

AC Volts Functions

� 3 inputs with selectable legends – AC volts Line 1, AC volts Line 2, AC volts L1 + L2, AC volts panel & AC volts transfer

� High / low volts alarms

AC Volts expanded screen

� Shows all voltage inputs on one screen

Amp Functions

� 2 AC amps inputs

� Selectable legends AC amps, AC amps line 1 & AC amps line 2

� High amps alarm

Frequency Function

� 0-100 Hz

� Frequency alarm selectable for 50 or 60 Hz

The AC-VSEN includes 3 voltage transformers for up to 3 voltage inputs.

Supplied with 600-ACM.


One CT-10-3 current transformer is supplied with 600-ACM. If a twin line system is in use, a second CT must be ordered

CT-10-3 dimensions: 37.5 x 39.2 x 13.7 mm (1.5 x 1.55 x .55 in)


CT-HD is available for systems with large mains cables, too large for CT-10-3 (ordered separately).

CT-HD dimensions: Ø 47 x 10.5 mm (Ø 1.85 x 0.4 in) Hole size: 32 mm (1.25 in)

Specifications:

� Input voltage 10-35 V DC

� power consumption 45 mA power consumption 65 mA (back lighting on)

� for remote alarm operation use part no. 54-27C4

� See below

Monitoring

AC

Panel mounting kit available for MATRIX monitors.

Includes fascia, fastenings and template: part no 600-PMK

600-ACM

AC-VSEN CT-10-3 CT-HD


Range HigHligHts

� Monitoring for up to 3 tanks

� 14 selectable legends for tank descriptions eg. Fuel, Water, Blackwater

� Hi/Low level alarms for 3 tanks

� Graphic or percentage display

� Backlit display for night viewing

� Audible alarm with mute

Fuel & Water Tank Senders

Part No. Tank Depth

(probe adjust range)

Fuel Water Mounting

TSTMF-15-30 N 150-300 Yes No TopTSTMF-30-60 N 300-600 Yes No TopTSTMF-60-100 N 600-1000 Yes No TopTSSMF-15-30 N 150-300 Yes No SideTSSMF-30-60 N 300-600 Yes No SideTSSMF-60-100 N 600-1000 Yes No SideTSSMF-15-30 N 150-300 No Yes TopTSTMW-30-60 N 300-600 No Yes TopTSTMW-60-100 N 600-1000 No Yes TopTSTMW-15-30 N 150-300 No Yes SideTSTMW-30-60 N 300-600 No Yes SideTSTMW-60-100 N 600-1000 No Yes Side

Single or Multi-tank display

Monitoring

Tank Level

Specifications:

� Litres, imperial or US gallons

� Power supply 10-35 V DC

� Interfaces directly with pre-calibrated TS1 Sender 0-5 V output. (see page 33).

� If fitting an uncalibrated TS1 Sender, calibration can be done on site within the 600-TLM-N meter.

LED Tank Gauge

The 600-TG offers economical monitoring for fresh or grey water tanks (plastic or fibreglass only). Using 600-TGSK strategically mounted well nuts will give 4 tank levels. Supplied with one sender kit. Second sender ordered separately. Also available is the RV-TS-5M Tank sender. Only one hole is required for installation, the sender is sealed via external lock nuts. Suitable for tanks with maximum depth of 280 mm.

Suits tanks with maximum depth of 280 mm and a maximum wall thickness of 10 mm, and a maximum hole size of 22 mm. Comes with 5 m cable.

Well nut hole size 9 mm (3/8”). Cable length 5 m. (One kit supplied with 600-TG).

600-TGSK

RV-TS-5M

600-TG

Dimensions:

60 x 34 x 22 mm (2.4 x 1.3 x .9 in)

600-TLM-SIF

Easy to install probe senders

Fully adjustable to suit the 600-TLM-N (no moving parts). Available for fuel or water tanks in two mounting styles, top (TSTM) or side mount (TSSM).

Please note: These fuel and water senders are 0-5V output and do not require a 600-TLM-SIF.

600-TLM-SIF Tank sender interface module

� Is only required when using VDO (10-180 �) or Teleflex (240-33 �) senders to produce a 0-5 V signal to operate the 600-TLM-N.

� Switchable link for VDO or Teleflex signal. 10-32 V supply.

� One unit per sender required.

600-TLM-N

TSTM TSSM


BEP ultrasonic Tank Sender - No Moving Parts

BEP’s proprietary Window’s based software application allows for TS1 senders to be programmed specific to tank shape, size and fluid type via a computer’s uSB port.

Programming is a simple process and can be carried out by downloading free software from www.bepmarine.com and purchasing a programming kit TS1-PK.

Once programmed, the specific tank parameters are stored in the non-volatile memory of the TS1. Find more detailed information at www.bepmarine.com

0.5M

95.43 [3 3/4"]

19.6

4 [3

/4"]

95.27 [3 3/4"]

84.8

8 [3

5/1

6"]

Monitor ingUl t r a son ic Tank Sender

Range HigHligHts

� Handles common outputs – 240-33 �, 10-180 �, Vetus 10-300 � and 0-5 V tanks from BEP, Teleflex, Faria, VDO and many other popular instrument brands. (When connecting to non-adjustable gauges the TS1 must be pre-calibrated)

� Low Profile Design and standard SAE 5 hole mounting pattern, allowing it to be retrofitted to practically all other sender brands.

� Can be set for tank dimensions via computer using BEP Marine’s propietary TS1 software, avoiding experimental tank filling on site

� Connects directly to the BEP 600-TLM-N digital tank monitor when configured to a 0-5 V output

� Is set for 0-2000 mm depth off the shelf (not suitable for tank depths less than 200 mm)

Specifications:

� Operating voltage: 10-32 V

� Current draw: 25 mA with 5 V gauge output

� Measurement method: Acoustic sonic measurement

� Tank depth: 0–2000 mm (6.5 ft)

� Accuracy Distance: 0–2000 mm (6.5 ft) at 2 mm accuracy

� Mounting: SAE 5 stud mounting pattern with gasket, seal and screws (top mount only).

� Environmental temperature: 4–65 °C

� Chemical resistance: Petrol, diesel, water, toilet chemicals

� Tank type style: Metal and plastic with non linear capacity

� Works with petrol, diesel, fresh water, grey water and black water

…the most unique and sophisticated system of any tank monitor tested…the ultrasonic technology is extremely accurate.

Practical Sailor Magazine, July 2009

TS1

TS1-PK


Range HigHligHts

� More information, one screen

� Legends can display detailed info, rather than just digits

� Draws 70% less power than equivalent LCD screens

� Supplied with LB-450-50 mV shunt

� Compatible with TS1 Ultrasonic Tank Sender (p 33)

Contour Mul t i func t ion d ig i t a l moni tor s

The 600-DCTLM is designed for installations where space is not available to fit both the 600-DCM and 600-TLM-N.

Selectable legends allow full information to be clearly shown on the screen unlike other digital meters which only show confusing digits.

Range HigHligHts

� Designed to be surface mounted or recessed into a panel with a contour panel fascia

� Audible alarm with mute function

� Power supply 10-35V

� Display is backlit for easy night time viewing

� Current consumption 45 mA

� Current consumption 65 mA (backlight on)

Voltmeter Bilge Monitor

The 600-VM3 offers the ability to have 3 voltage inputs with Hi/Low alarms. It can also be configured as a bilge monitor with selectable legends for different bilge areas. This allows the 600-VM3 to be either fully configured as a voltmeter or partially as volts or bilge, eg: position 1 volt meter, position 2 & 3 bilge monitor.

Selectable legends allow full information to be shown on the screen, unlike other digital meters available which only show confusing digits. LCD screen draws 70% less than equivalent LED screens.

600-VM3

� V/A pressed repeatedly cycles through 3 voltage inputs and amps charge and discharge

� C pressed repeatedly cycles through amphour capacity and percentage of charg

� T pressed repeatedly cycles through tank 1, 2, 3, 4, and multitank screen (up to 4 tanks)

600-DCTLM


Monitoring

Gas detec tor s

Range HigHligHts

� Dual sensors for LPG and Petrol

� Visual and audible alarms; provision for external alarm

� Self-testing

� Automatic shut-off solenoid control with pulse and hold circuit for low power draw (600-GDL only)

� Provision of bilge blower

� 66.5 x 88 x 17 mm 2.4 x 3.5 x 0.7 in

The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors which detect both LPG and Petrol, with visual and audible alarms.

600-GD will detect LPG, Petrol and CNG fumes. Supplied with one sensor, with an option for a second sensor, Part no BL-SL-L output for remote alarm and blower unit. 600-GD can be used on 12 or 24 V systems.

One Sensor lead supplied (5 m) with GD & GDL. Second Sensor lead ordered separately

Part no BL-SL-L

600-GDL has the same features as the 600-GD, with the ability to switch a valve on. It contain a unique “Pulse & Hold” circuit within the detector.This allows the valve to be pulled in at 12 V and then once energized it will step down to hold the valve in place. This reduces power consumption and heat while the gas is turned on.

600-GDRV has the sensor mounted in the front facia creating a stand alone unit. The unit is designed to be surface mounted at the vessel's lowest point.

Contour Matrix Gas Detectors - 600GD, 600GDL, FD-2

Voltage (V DC) 10 - 32Current (mA) 350 max.Alarm Sensitivity 20% lower explosive limitCurrent@Out (mA) 800 max.Solenoid (mA) 700 pulse, 250 hold

600-LPG is a stand alone gas shut-off system with no gas detection ability. For 12 V systems order VR2.2 separately. For 24 V systems order VR2.2-24V.

FD-2 is designed for an economic in-dash installation. Supplied with sensor (5 m cable) which is capable of detecting combustible gases.

The SA296CoMP-12V is suitable for countries where VR2.2 is not approved. The CE approved SA296COMP-12V can be installed by an approved gas installer using approved components from within specific markets. 12 V or 24 V options available. Uses 1/4" BSP thread.

VR2.2 Solenoid Valve and Regulator kit , compatible with 600-GDL Gas Detector or 600-LPG.

Solenoid voltage: 12 V or 24 V; Gas outlet: 3/8 BSP; Gas inlet: POL Thread; Current draw: 800 mA; Current draw with GDL or PH-12V: 0.2 A; Regulator Flow Rate: 3 kPa.

Note: The VR2.2 may not comply in some countries, and does not comply with uSCG requirements. Please check with you local gas installer. Not for sale

in the uSA.VR2.2

SA296CoMP-12V

600-GDRV 600-LPG FD-2

600-GD 600-GDL


sOP Panels

� 10 mm red LED’s giving important systems on information

� Ideal for flybridge or remote dash position. Also available with alarm and mute switch.

� Backlit labels

Monitor ingAnalog moni tor ing sys tems

SoP Panels

Part No. mm

L x W x 40

in

L x W x 1.6

Label Sheet

LEDs Alarm Mute switch

SOP1 115 x 127 4.5 x 5 1 4 No NoSOP1-AL 115 x 127 4.5 x 5 1 3+1 switch Yes YesSOP2 115 x 239 4.5 x 9 1 - 2 8 No NoSOP2-AL 115 x 239 4.5 x 9 1 - 2 7+1 switch Yes Yes

Range HigHligHts

� Analog meters as used in BEP Contour circuit breaker panels.

� All analog meters accurate to within 2.5%

CT-10-AN must be ordered

when using N060ACT or N0100ACT.

Meters Part No. Range Division Marks

Shunt Type

Amp (DC)

N010A 0-10 A DC 0.5 A InternalN020A 0-20 A DC 1 A InternalN050A 0-50 A DC 2 A 50A-50mVN0100A 0-100 A DC 5 A 100A-50mVN0150A 0-150 A 1 A 150A-50mV

When ordering optional external shunt ammeters, shunts must be ordered separately.

MetersPart No. Range Division

Marks

Volt (DC)N816DCV 8-16 V DC 0.2 VN1632DCV 16-32 V DC 0.4 V

Volt (AC)N0150ACV 0-150 V AC 10 VN0300ACV 0-300 V AC 20 V

Amp (AC)N060ACT 0-60 A AC 5 AN0100ACT 0-100 A AC 5 A

59.7

1mm

(2

3/8

”)

32.2

0mm

(1

1/4

”)48

.30m

m (

1 7/

8”)

Ø51m

m (Ø

2”)

Ø3.00m

m (Ø

1/8”)

48.30mm (1 7/8”)

71.00mm (2 13/16”)

66.80mm (2 5/8”)13.80mm (9/16”)29.10mm (1 1/8”)

SoP1 SoP2

N816DCV

No60ACT

No300ACV

No100A


Monitor ingAnalog & d ig i t a l moni tor ing sys tems

Range HigHligHts

� Contour panel/front facia complements Contour range

� All Contour Matrix monitors can fit into this style of panel

MS2

Part No. Range Inputs

MS2-050 0 - 50 A DC 3

MS2-0100 0 - 100 A DC 3

MS2-0150 0 - 150 A DC 3

87.1

6mm

(3

7/16

”)

76.84mm (3”)

FrontFacia

Available

47.09mm (1 7/8”) 27.70mm (1 1/16”)

115.

55m

m (

4 9/

16”)

107.00mm (4 3/16”)

95.0

0mm

(3

3/4”

)

Cut-OutDimensions

127.00mm (5”)

MS1Part No. Range Inputs

MS1-12V 8 - 16 V DC 3

MS1-24V 16 - 32 V DC 3

MS1-0150V 0 - 150 V AC 1

MS1-0300V 0 - 300 V AC 1

MS1 Analog Battery Condition Meter (expanded scale)

� Panel switchable to show 3 different battery banks.

� Available 12V (8-16V) or 24V (16-32V)

MS2 Analog Ammeter Panel

� Panel switchable for use on up to 3 different ammeter shunts

� Supplied with 1 shunt, meter scales available, 0-50A 0-100A 0-150A (refer table left)

MS3 Digital Battery Monitor

� Same functions as 600-DCM (p.30)

� Supplied with 450A-50mV shunt

MS4 Digital AC Monitor

� Same functions as 600-ACM monitor (as shown on page 31)

� Supplied with volts and amps transducer and current transformer (CT)

MS4

MS3

MS2-0100

MS1-12V


Range HigHligHts

� Molded gasket incorporates fastening covers

� Switches clip easily into rear of panel and can be removed to replace with different function switches eg. on/on, on/off/on, off/(on) and (on)off(on)

� Mini fuses accessible from front of panel with removable cartridge

� Custom designed toggle cover with unique sealing feature

� Panel supplied with label LBL-CMP (page 73)

SpecificationsPart No. mm

L x W x 65

in

L x W x 2.5

Label Sheet

Switches

CMP-4WP 95 x 107 3.75 x 4.25 LBL-CMP 4CMP-6WP 95 x 107 3.75 x 4.25 LBL-CMP 6CMP-5WPS 95 x 107 3.75 x 4.25 LBL-CMP 5

Replacement Fuses ATMPart No. Type operation

603905 5 2603910 10 2603915 15 2603920 20 2603930 30 2

ATM fuses are supplied in packs of 2.

Sprayproof Switch PanelsCompac t Mar ine Pane ls


L x W x H

in

L x W x H

Label Sheet Switches

900-3WPS 95 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 3900-3WPSW 95 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 3900-4WP 96 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 4900-4WPW 96 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 4900-5WPS 96 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 4900-5WPSW 96 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 4900-6WP 96 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 6900-6WPW 96 x 107 x 75 3.75" x 4.25 x 2.9 LBL-WP 6

Range HigHligHts

� Compact panel size

� Sprayproof inline fuse holders with fuses included

� Waterproof power receptacles (16A) in five and three way models

� Waterproof to IP56

� Panel supplied with label LBL-WP (page 73)

CMP-5WPS

CMP-4WP

CMP-6WP

900-5WP

900-6WPW

900-4WP


Range HigHligHts

� Replaceable clip-on contour wave (customized colors available for OEMs)

� Mounting screws covered by switch cover

� Backlit LEDs

� Flexible overshot cover allows for easy switch operation

� Ribbed gasket provides watertight seal with switch cover

� Molded gasket on panel base creates watertight seal against mounting surface

� Unique design allows labels to be read whether mounted vertically or horizontally.

� Panel supplied standard with label SET-G2-1 (labels SET-G2-2 ordered separately, page 75)

Spare Switches for Contour Generation IIPart No. Switch type

SW-CG1 On/OffSW-CG2 On/Off MomentarySW-CG3 On/Off/OnSW-CG4 Momentary On/Off/Momentary OnSW-CG5 On/On

SpecificationsPart No. Color Switches Fuses Label Sheet

CG2-2W Black 2 No SET-G2-1CG2-2W-F Black 2 1 SET-G2-1CG2-4W Black 4 No SET-G2-1CG2-4W-F Black 4 2 SET-G2-1CG2-6W Black 6 No SET-G2-1CG2-6W-F Black 6 3 SET-G2-1CG2-2W-W White 2 No SET-G2-1CG2-2W-F-W White 2 1 SET-G2-1CG2-4W-W White 4 No SET-G2-1CG2-4W-F-W White 4 2 SET-G2-1CG2-6W-W White 6 No SET-G2-1CG2-6W-F-W White 6 3 SET-G2-1

Available upon request: Different custom color combinations for Contour strip and rubber over-mold.

The Contour Generation II spray proof range offers unique styling using the latest techniques in injection molding.

The switch tray is molded plastic with a rubber gasket and seal molded into the plastic.

The cover is molded in a clear plastic with a rubber over-mold allowing the flexibility to operate the switches through the front of the panel while providing a clear window for label backlighting.

The contour wave strip is interchangeable allowing for custom colors for OEM applications. Standard color supplied is black panel with charcoal strip.

G2 can be mounted vertically or horizontally and is available in 2, 4 and 6 way configurations.

A joiner (CG2-JB) is available for multiple panel installations. Supplied complete with on/off switches, these can be interchanged with a variety of different switch options.

Sprayproof Switch PanelsContour Gener at ion I I

CG2-6W

SW-CG1

CG2-4W

CG2-2W

CG2-JB


Sprayproof Switch PanelsMicro ser ies

Range HigHligHts

� Green LED backlit labels; red when on

� Full range of text or graphic labels available; mix n' match labels and panels to suit

� Switching rated 20 A DC

� 86 x 58 x 28 mm (3.4 x 2.3 x 1.2 in)

� Waterproof to IP56

� Label see LBL-MIC included; additional label sets available, see page 75

1 x 2 way switch, 1 x 3 momentary switch

2 x 10 mm LEDs showing systems in operation

Bilge alarm and bilge pump control panel includes: 1 on/off/on switch for auto manual control; 1 warning light and alarm for high water level alarm. (Float switch ordered separately – Part No. SB1-FS)

2 x 2 way switches 1 x 2 way switch, 1 x 3 way double pole switch

CSP6 Includes 6 switches unfused for installation where separate fused supply is available.

CSP6-F Includes 6 switches and 3 inline fuse holders with fuses behind panel.

CSP6-PTC fuses are solid state resettable fuses which change to a high resistance device on over-current. The panel is supplied with 6 x 9A PTC fuses mounted internally. No more changing fuses!

Range HigHligHts

� CSP6-PTC uses the latest in overload protection technology - Positive Temperature Co-efficient

� Green LED backlit labels; red systems on indicator

� Switching rated 20 A DC

� Removable cover plates conceal screws & water drain

� Label set SET-1SP included, additional label sets available, see page 73

Specifications

Part No. mm

L x W x H

in

L x W x H

Label Sheet

Fuses PTC

CSP6 158 x 112 x 65 6.25 x 4.4 x 2.5 SET-1SP No NoCSP6-F 158 x 122 x 75 6.25 x 4.4 x 2.5 SET-1SP 3 NoCSP6-PTC 158 x 112 x 75 6.25 x 4.4 x 2.5 SET-1SP No 6

900-2WPMoM 900-SoP900-BA

900-2WPoFo900-2WP

CSP6


Range HigHligHts

� Removable frame conceals mounting screws

� Concealed ATC fuses accessible from front of panel; ATC fuses supplied

� 16 A rocker switches

� Panels are modular and square for vertical or horizontal stacking.

� LED Systems On light

� Supplied with: Spacer for accurate mounting placement, label sheet part no. SET-1000 (page 75)

� Maximum panel load 50 A

Switch Panels1000 Ser ies Inter ior

SpecificationsPart No. Switches Fuses Voltage1000-6W 6 6 12

Contour Interior Switch Panel Series

The smart, economical interior option for smaller vessels.Fully modular and built with ease of access in mind.

The 1000-DFR is designed to take the BEP 600 series products.

Frame and digital meter ordered separately.

108mm (4.25")

108m

m (4

.25"

)

60m

m (2

.4")

16mm(.6")

40mm(1.6")

SW-RVS2 ON/OFF

AMMETER

1000-AM10 10 A Ammeter (internal shunt)

1000-AM20 20 A Ammeter (internal shunt)

1000-AM50 50 A Ammeter (external shunt, supplied)

SWITCH PANELVoLTMETER

1000-VM-12V 12 Volt Systems

1000-VM-24V 24 Volt Systems

1000-6W

1000-AM50 1000-6W1000-VM-12V

1000-DFR


Exterior Switches

Switches Inter ior/Exter iorContour 1100 Ser ies

SpecificationsPart No. Description

SW-6064B3P On/On (On/Off)SW-6064C3P On/Off/On SW-6064D3P On/Off Spring-loaded

in "on" position

Replacement and/or different operational switch

Interior Switches - Rated 10 A

Part No. Color Single/Double L x W x H1100-BK Black Single 60 x 30 x 18 mm

2.4 x 1.2 x 0.75 in1100-CH Chrome1100-GD Gold1100-WH White1101-BK Black Double 91 x 30 x 18 mm

3.6 x 1.2 x 0.75 in1101-CH Chrome1101-GD Gold1101-WH White

Exterior Switches - Rated 10 A

Part No. Color Single/Double L x W x H1100-BK-TS Black Single 60 x 30 x 18 mm

2.4 x 1.2 x 0.75 in1100-WH-TS White

1101-BK-TS Black Double 91 x 30 x 18 mm

3.6 x 1.2 x 0.75 in1101-WH-TS White

Supplied with on/off 20 A DC rated switches. For other opera-tions, eg: momentary, see table below.

All switches come supplied with a label sheet. For reference, see page 73

The Contour Interior switch can be either surface or recess mounted and is available in black, gold, chrome and white.

The interior series is supplied standard with a three terminal on/on switch which can be used for on/off circuits or two way light installations. For applications, eg: shower drain pumps or electric toilets, momentary switches can be interchanged into the switch plate.

Switches can be turned 90º for horizontal mounting, and all are current rated at 10 A DC.

1101-GD

1101-BK

SW-6064B3P

1100-BK 1100-BK-TS1101-BK-TS1101-CH


Range HigHligHts

� Essential circuits, 24 hour supply

� Mains breakers for control panels, davit winches, or treatment systems

� Panels are supplied with a BEP 703-300A/B heavy duty negative bus, to accommodate all the negative connections at the battery. (Please note: 800-MS4 is supplied with 702B negative stud)

� Heavy duty breakers for anchor winches

� Powder coated aluminum panel

� Supplied with a full label set for panel circuit breakers - Part No SET-MSP; additional label sets available (see page 73)

� Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries

Battery Management Panels

The 800-MS1 panel is designed for power or sail boats between 10–12m (32.9-39.5 ft) with single engines.

260 x 351 x 75 mm (10.25 x 13.8 x 2.9 in)

Auxiliary Parts (ordered separately)

701 Battery switches to fit panel cutouts

713 Battery switch label sheet

Circuit Breakers

CBL-50A-SP 50 A

CBL-75A-SP 75 A

CBL-100A-SP 100 A

For treatment systems, davit winches and sub-mains.

The 800-MS2 panel is designed for power boats between 10–12 m (32.9 - 39.5 ft) with twin engines. 281 x 463 x 75 mm (11.1 x 18.25 x 2.9 in)

The 800-MS3 panel is designed for power boats between 12 –16 m (39.5 – 52.5 ft) with larger diesels. 380 x 463 x 95 mm (15 x 18.25 x 3.75 in)

The 800-MS4 panel is designed for sail boats up to 14 m (46 ft) and power boats up to 10 m (32.9 ft) with single engine. 160 x 239 x 75 mm (6.3 x 9.4 x 2.9 in)

800-MS1

800-MS2

800-MS3

800-MS4


Battery DistributionBat ter y swi tches on /of f

Specifications - All recessed or surface mount, tin-plated copper studs & nuts, ignition-protectedPart No. mm

L x W x H

in

L x W x H

Rating (A DC) Voltage

(V DC)

Operation Stud size

[Studs x (mm / in)]Continuous Intermittent Cranking

700 68 x 68 x 110 2.7 x 2.7 x 4.3 275 455 1250 48 On/Off 2 x (10 / 3/8)701 69 x 69 x 75 2.75 x 2.75 x 3 275 455 1250 48 On/Off 2 x (10 / 3/8)701S 69 x 69 x 75 2.75 x 2.75 x 3 200 300 1000 48 1-2-Both-Off 3 x (8 / 5/16)720 102 x 102 x 90 4 x 4 x 3.5 600 800 2500 48 On/Off 2 x (12 / 1/2)720-DP 102 x 102 x 90 4 x 4 x 3.5 400 525 1500 48 On/Off 2 poles 4 x (12 / 1/2)721 102 x 102 x 90 4 x 4 x 3.5 350 500 1500 48 1-2-both-Off 3 x (10 / 3/8)

The 721 Heavy Duty Battery Switch fits into the same contour lock system as used on the battery distribution system. Rated at 600 A continuous and 2500 A cranking. It is well suited to larger vessels.

As with the 701, the 721 can be recessed or surface mounted. The 721 uses the same style of self cleaning sliding contact as used in the 701 and uses the same label sheet (part number 713 or 715 refer page 74).

The 701 Contour Battery Master Switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches.

The 701 also features a control knob which cannot be removed while in the ON or OFF position, however, can be removed by switching to an counter-clockwise 45° position. The control knob also features an interchangeable labeling system allowing a full range of applications (Part number 713 or 715: page 74).

The 701 also features removable side plates on 4 sides for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements.

The 701 can be either surface or recess mounted by cutting a 52 mm hole (2.1 in)

BEP’s patented Contour Locking System is an innovative feature that allows for multiple battery management components to be connected to each other providing for a clean finished installation. These locking tabs can be found on battery switches, heavy duty buss bars, fuse holders, distribution studs and breaker modules.

701

720


Battery DistributionSe lec tor Swi tches

701S Mini Battery Selector Switch

The 701S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S offers a simple economical way of separating two batteries.

Please note selector switches will not separate electronics from harmful engine starting spikes.

721 Battery Selector Switch

The 721 Battery Selector Switch is our heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries.

Please note selector switches will not separate electronics from harmful engine starting spikes.

720-DP Double Pole Battery Switch

The 720-DP Double pole battery switch Is a welcome addition to the BEP battery switch range. It has the same dimensions and features as the 720 battery switch. The 720-DP also meets the needs of systems where positive and negative supplies must be isolated at the same time.

SAFETy NoTE: BEP recommends the 720-DP for isolating positive and negative circuits. We do not recommend it for switching house and start battery systems at the same time. We recommend separate switches for house and start for safety reasons. You may need to isolate your engine battery in an emergency and not your house battery, which typically powers the communications.

The 700 Easyfit Battery Switch

Following customer feedback about installations where switches need to be recessed through varying thicknesses of panels, we developed the 700 Easyfit. It achieves this through an easily removable threaded ring allowing for panel thicknesses up to 19mm (3/4”). It uses the same features as the 701 with the removable key 45° past the off position, labelled handle and a removable back cover covering exposed terminals to meet ABYC specifications.

The switch can also be surface mounted offering a unique style compared to other switches available on the market.

The 700 Easyfit can easily be retro - fitted in place of most European post and lever type switches.

Specifications for these items on page 44


Battery DistributionPane l -mounted swi tches ; mount ing p la tes

The panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution.

Range HigHligHts

� Compact, lightweight

� Same specifications as model 701 and 701S (see pages 44 and 45)

� Removable key on 701-PM

� Countersunk recesses for surface mount application

� Standard 52 mm (2 1/16 in) hole cut out (same as standard gauge hole)

� Inside: captive inserts for 4.8 mm (3/16 in) nuts; full access for cables - no restrictions

� Standard BEP interchange label system (page 74)

Mounting Plates for Battery SwitchesFor Part No. mm

L x W

in

L x W

Description

701 BSP-1 95 x 95 3.75 x 3.75 Single recessed

720BSPL-1 170 x 170 6.75 x 6.75 Single recessedBSPL-2 170 x 273 6.75 x 10.75 Dual recessedBSPL-3 170 x 379 6.75 x 14.9 Triple recessed

With the growing number of

builders installing BEP battery

switches in panels greater than

10 mm (3/8 inch) thickness,

BEP realized the need to supply

simple mounting plates for

single or multiple switches in

our small and large battery

switch ranges. These are

supplied with all the mounting

hardware and come in a

matching grey finish.

701 Battery Switch AccessoryFor applications where emergency parallel switch needs to be highlighted.

Ordered separately - replaces existing knob.

As shown in Contour Connect panels

701S-PM

BSPL-1

BSP-1 701-KEy-EP

701-PM


High-Current Remote operated Battery Switches

All recessed or surface mount, tin-plated copper studs & nuts, ignition-protectedPart No. mm

L x W x H

in

L x W x H

Rating (A DC) Voltage

(V DC)

Function Stud size

Studs x (mm/in)Continuous Intermittent Cranking

701-MD 68 x 68 x 101 2.7 x 2.7 x 4 275 455 1250 9.5 - 32 On/Off 2 x (10 / 3/8)720-MD 102 x 102 x 110 4 x 4 x 4.33 500 700 2500 9.5 - 32 On/Off 2 x (12 / 1/2)

Range HigHligHts

� Remote operation

� Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes to starter motor. (Large cost saving in copper cables)

� Reduced installation labor, due to shorter battery cable runs

� Manual override option to meet CE requirements

� Power Draw: Switch off: 12mA. Switch on: 15 mA, switch operating 120 mA for 3 seconds @ 12 v nominal

� LED status identification for remote control switch

� Same capacities/specifications and mounting options as standard BEP battery switches

� Uses same interchangable labeling system as BEP battery switches (page 74)

Battery DistributionRemote oper ated bat ter y swi tches /

Due to the increased load requirements and large increases in the cost of copper battery cable, the MD range of battery switches allows you to install the battery switch very close to the battery, reducing cable lengths to starter motor. They are also ideal for remote isolation of bow thrusters.

80-724-0006-00For the remote operation of the 701-MD and 720-MD battery switches (above).

It can be mounted standalone or within the Contour Connect panel range. You can now wirelessly operate your BEP

motorized battery switches from a distance of up to 80 meters (250 feet) away

80-911-0045-00Control up to 4 separate 5 A circuits; eg, 701/720-MD battery switches, anchor light, navigation lights, and courtesy lights

No more lifting hatches to turn on battery switches — it's now all controlled from the remote keyfob

Control battery switches easily (On / Off ) from the dock

Remote has a rolling code, for security

NEWWireless Remote Control

80-724-0006-00

701-MD

720-MD


Voltage Sensitive RelaysHigh cur rent remote oper ated ( VSR)

High Current Remote operated VSRPart No. mm

L x W x H

in

L x W x H701-MDVS 68 x 68 x 101 2.7 x 2.7 x 4720-MDVS 102 x 102 x 110 4 x 4 x 4.3701-MDVS-24V 68 x 68 x 101 2.7 x 2.7 x 4720-MDVS-24V 102 x 102 x 110 4 x 4 x 4.380-701-0018-00 68 x 68 x 101 2.7 x 2.7 x 480-720-0018-00 102 x 102 x 110 4 x 4 x 4.3

Dual operation VSR and Emergency ParallelThe High Current Remote Operated VSR (Voltage Sensitive Relay), uses the same operation as the motor driven Battery Switches.

Range HigHligHts

� Dual battery sensing

� Remote emergency parallel function: the 701-MDVS and 720-MDVS can be operated through a momentary button on the dash which will parallel the batteries for a preset time of 10 minutes. Once this 10 minutes has passed, if the voltage is up high enough for the voltage sensitive switch to operate, it will stay engaged. If not, it will disengage.

� Engine run sensing: VSR will engage when the voltage on either start or house battery reaches 13.7 volts. If the combined battery voltage drops below 13.0 volts and the engine is not running, after 5 seconds the contacts will open and stay open until the start or house battery voltage exceeds 13.7 volts. If the combined battery voltage drops below 12.2 volts and the engine is running, after 5 minutes the contacts will open and stay open until the start or house battery voltage exceeds 13.7 volts. If voltage drops below 13 volts and stays above12.2 volts on either start or house battery while engine is running, the VSR will stay engaged.

� Manual override option

� The advantages of using a high current VSR is that it will cover your dual battery charging requirements and emergency parallel operation in one unit.

IT IS IMPERATIVE THAT THE NEGATIVE (BLACK) FOR THE MD/MDVS IS TAKEN

DO THIS WILL CAUSE THE UNIT TO WORK ERRATICALLY. ONLY ONE NEGATIVE FROM THE SAME BATTERY THAT IT IS ISOLATING. FAILURE TO

MUST BE SUPPLIED TO EACH UNIT FOR CORRECT OPERATION.

RED

GREENBLACK

THESE TWO CABLES MUST BETERMINATED INTO WAGO PLUG

(ON)/OFFSWITCH

OUTPUTINPUT

80-724-0007-00For the remote operation of the 701-MDVS and 720-MDVS voltage sensitive battery switches. It can be mounted standalone or within the Contour Connect panel range.

High Current Remote operated VSRPart No. Volts

(V)

Rating

(A)

Engages

(V DC)

Disengages

(V DC)701-MDVS 12 275 13.7 12.2 - 13.00720-MDVS 12 500 13.7 12.2 - 13.00701-MDVS-24V 24 275 27.4 24.4 - 26.00720-MDVS-24V 24 500 27.4 24.4 - 26.0080-701-0018-00 12/24 275 Emergency Parallel Only80-720-0018-00 12/24 500 Emergency Parallel Only

Also available in Emergency parallel only (no voltage sensitive function). See table.

80-724-0006-00

701

701

701-MDVS

720-MDVS


Voltage Sensitive Relays12 /24 V DC , 100 -125 A

Range HigHligHts

� Modern charging systems must be able to safely charge two or more different types of batteries from one engine. BEP’s VSR (Voltage Sensitive Relay) allows for fully charged engine starting batteries and deep cycle house batteries with one easy-to-install charging system.

� Case allows for surface or panel mount (52mm - 2 1/16 hole). Fits standard into Contour Connect panels

� Easy 3 wire connection at the battery. No need to bypass existing alternator wiring

� VSR’s have no volt drop. Conventional diode isolators incur a minimum of 0.6 V drop

� Compact size – no large heat sink

� Lower cost

Voltage Sensitive Relays - Ignition protectedPart No. mm

L x W x 50

in

L x W x H

Volts

(V)

Rating

(A)

Engages

(V DC)

Disengages

(V DC)Continuous Intermittent

710-125A 69 x 69 2.75 x 2.75 x 2 12 125 150 13.7 12.8710-125A-DS 69 x 69 2.75 x 2.75 x 2 12 125 150 13.7 12.8710-100A-24V 69 x 69 2.75 x 2.75 x 2 24 100 130 27.4 25.6

24V version only available in dual sense

710-125A (Single Sense) VSR operation

The Voltage Sensitive Relay (VSR) allows two batteries to be charged at the same time. When the engine is started and the start battery reaches 13.7 volts, the VSR engages, allowing two battery banks (start and house) to be charged simultaneously. When the voltage drops below 12.8 volts (eg the engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the start battery and protects sensitive electronic equipment, powered from the house battery, from harmful engine start up spikes.

710-125A-DS (Dual Sense) VSR Operation

Same as the 710-125A with the added feature of dual sensing. This allows the unit to sense the voltage of both batteries that it is connected between. If either battery is receiving a charge the VSR will activate paralleling the two battery banks. The 710-125A-DS is designed for situations where a battery charger or second charging source is used into the house battery.

Wiring diagrams indicative

of installation only, for

full instructions see the

BEP website: www.bepmarine.com

Low Voltage Sensitive Relay

The LVSR is BEP's latest innovation in battery protection. If your vessel's primary voltage falls below 11 V, the LVSR automatically detects this and switches the essential circuit load to a second battery. When the LVSR detects a rise to 13 V on the primary battery, it reverts to its original state, and the LVSRs alert light switches off. The primary application for this is to ensure power is available for bilge pumps on unattended boats during heavy rain conditions. If a second battery is not connected to the LVSR, it will act as a low voltage disconnect. Ideal for charter boats.

Voltage Sensitive Relays - Ignition protectedPart No. mm

L x W x H

in

L x W x H

Volts

(V)

Rating

(A)

Engages

(V DC)

Disengages

(V DC)80-710-0014-00 69 x 69 x 50 2.75 x 2.75 x 2 12 40 13 11

Range HigHligHts

� Avoids batteries being totally discharged

� Easy 3 wire connection at the battery.

� No need to bypass existing alternator wiring VSR’s have no volt drop.

� Conventional diode isolators incur a minimum of 0.6 V drop.


Battery Distribution ClustersS ing le eng ine , two bat ter ies

50

With the successful release of the BEP battery distribution system, BEP saw the need for ready assembled clusters for different applications to make the installation within the battery area even easier. Following is the range as outlined in each diagram, which are overviews only.

All clusters are completely bused and pre-wired internally and are supplied with mounting fastenings along with easy to follow instructions. These include all connecting points clearly marked with ABC labels as shown in all illustrations.

The 714-100A uses a dual sensing VSR (710-125A-DS). A welcome alternative to the 701 selector switch, it ensures you will always have a fully charged reserve battery. When the switch is in position one, it becomes the sensing battery for the VSR. Battery two, which is in isolation, will be charged via the VSR when the engine is running ensuring it is always fully charged. When the switch is in battery two position, this becomes the sensing battery and battery one is charged via the VSR. The fact that there is always a fully charged battery in reserve is a huge safety factor.

715-H and 715-V

Available as Horizontal or Vertical units.

To be used in the following systems:

1) Single outboard dual battery bank

2) Single alternator dual battery bank

3) Twin alternator dual battery bank

Single Engine, Two Battery Banks

Please note: With the 714-100A the electronic loads are run off the same battery as the engine starting battery.

See tables on page 52 for specifications.

BATTERy CHARGING

MADE EASy!!

714-100A

715-V


Battery Distribution ClustersS ing le eng ine , two bat ter ies

51


An ideal replacement for a Battery Selector Switch. Just remove selector switch and connect existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system.No more flat start batteries.Electronics protection from harmful engine start spikes.

The 716 cluster is for use on charging systems up to 125A. To be used in the following systems:

1. Single outboard dual battery bank.

2. Single alternator inboard engine dual battery bank.

The 716 cluster replaces battery isolator systems. For VSR operation, see page 49.

BATTERy CHARGING MADE EASy!!

716-H-100AVSR

716-SQ-100AVSR


Battery Distribution ClustersMul t ip le eng ine , mul t ip le bat ter ies

Battery Distribution Clusters

VSR Charging Current: 125 A, Battery Switch Rating: 275 AEngine type / battery (banks) Part No. mm

L x W x 75

in

L x W x 3

Single inboard or outboard / 2

714-100A 138 x 69 5.4 x 2.75715-H 207 x 69 8.1 x 2.75715-V 69 x 207 2.75 x 8.1716-SQ-100AVSR 138 x 138 5.4 x 5.4716-H-100AVSR 276 x 69 10.85 x 2.75716-V-100AVSR 276 x 69 10.85 x 2.75

Twin inboard or outboard / 2 715-S 210 x 69 8.1 x 2.75Twin outboard / 3 717-100A 138 x 207 5.4 x 8.1Twin inboard / 3 718-100A 207x 138 8.1 x 5.4Triple outboard / 4 719-100A 207 x 207 8.1 x 8.1

Twin Engine, Two Banks

Twin outboard, Three Banks

Twin Engine, Three Banks

Triple outboard, Four Banks

The 715-S allows the house loads to be switched between port and starboard batteries.

The selector switch can also be used to parallel the batteries when in both positions.

This system is designed for twin outboard installations using outboards without AUX outputs. It will allow the port engine to charge the port start battery and the house battery when the VSR is engaged. It will also allow the starboard engine to charge the starboard start battery and the house battery when the starboard VSR is engaged, giving a combined charge from two outboards into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine.

The 718-100A is designed for twin inboard systems when it is not practical to have both engine alternators in parallel because of the types of regulators used on these alternators. The house battery is charged from the port engine when the VSR is engaged. (for VSR operation read page 49).

This system is designed for triple outboard installations. Once again using multiple VSR’s off each start battery giving combined charge from all 3 outboards into the house battery via VSRs.

718-100A

715-S

717-100A

719-100A


Battery Distribution ClustersMul t ip le eng ine , mul t ip le bat ter ies

Offers the same features as the 716-SQ-100AVSR (page 51), with two important differences.

The VSR and Emergency parallel switch are combined into one voltage-sensitive switch, and that switch is able to be remote-operated. For features of the motorized VSR, see page 48. The layout allows all cables to be attached from the bottom of the cluster.

Offers the same features as the 717-100A (see page 52).

The VSR and Emergency parallel switch are combined into one voltage-sensitive switch, and that switch is able to be remote-operated. For features of the motorized VSR, see page 48. The layout allows all cables to be attached from the bottom of the cluster.

Manual Clusters using Motorized VSR

80-716-0017-00

80-716-0018-00


Bat ter y Control Center

Essential CircuitsIf you're installing a single engine system, there will be 2 spare CBs which can be used for essential circuits, eg. stereo memory, bilge pumps. If installing a dual system, only one CB is available.

Battery Switch Control CentersPart No. Description

80-700-0050-00 Single engine remote80-700-0051-00 Twin engine remote80-700-0052-00 Triple engine remote

Sophisticated Electrical Systems Need Reliable Automation.That's Key. Centralize power handling with the BEP Battery Control Center…

Range HigHligHts

� Control all battery switches from one convenient position

� Isolate each battery via key switch or designated battery banks via breaker

� LED Status indicators for battery switch status.

� Uses Contour Connect molding to match other BEP products. (see Contour Connect panel range)

…and BEP's latest line of rugged remote-operated switching banks, Cluster or Contour Connect mounted, delivers hard-handling, good-looking power management where it's needed. The Battery Control Center (BCC) is equipped with locks on each battery switch position. This ensures group operation at the turn of the key. Any switch can be isolated by disengaging its lock and toggling the switch off.

80-700-0051-00


Remote Bat ter y Management Systems12 /24 V DC , 100 -125 A

Range HigHligHts

� Complete system including all cable links (Battery Control Center ordered separately)

� Offers all features of motorized battery switches and Motorized VSRs in one kit. Makes ordering easy!

� Contour Connect panels can be flush-mounted for tidy installation and can be combined with other Contour Connect products (page 58-61)

� Clusters are surface mount, and can be rearranged to meet specific needs, such as port and starboard configurations and can be combined with other battery distribution products (page 67-70)

� Available in single, dual and triple engine configurations

Single Engine

Dual Engine

Triple Engine

80-716-0016-00

80-716-0015-00

80-716-0014-00

Dimension guide

Clusters are made from uniformly square switches, each side 69 mm (2.7")

Single Engine

Dual Engine

Triple Engine

80-700-0048-00

80-700-0047-00

80-700-0053-00


Contour Connect PanelsS ing le eng ine , two bat ter ies

The CC-801 incorporates a version of our very successful 714-100A cluster (see page 50)

The CC-801 is supplied pre-wired with back cover and with a CC-J joiner to allow it to be combined with other modules.

The CC-801 is supplied standard in charcoal with light grey wave strip. Other trim colors are available for volume OEM orders.

DimensionsPart No. L x H x D mm L x H X D in

Module Cut-out Module Cut-outCC-801 166 x 106 x 55 146 x 86 6.5 x 4.2 x 2.2 5.75 x 3.4CC-802 166 x 212 x 55 126 x 192* 6.5 x 8.3 x 2.2 5.75 x 7.5*80-700-0054-00 233 x 106 x 55 213 x 86 9.2 x 4.2 x 2.2 8.5 x 3.4

* Single hole only.

Offers the same features as the CC-802.

The VSR and Emergency parallel switch are combined into one voltage-sensitive switch, and that switch is able to be remote-operated.

Fewer components, more compact.

The layout allows all cables to be attached from the bottom of the cluster.

For features of the voltage sensitive relay, see page 48.


The CC-802 incorporates a version of our very successful single engine battery switch cluster (page 51).

The CC-802 is supplied loosely assembled with links and joiners to allow it to be assembled in either the vertical or horizontal orientation as shown in illustrations.

Full wiring instructions are supplied to allow pre assembly for both orientations.

CC-801

CC-802

CC-802

80-700-0054-00


Contour Connect PanelsTwin ou tboard , three bat ter ies

Twin outboard, Three Battery Banks

DimensionsPart No. L x W x H mm L x W X H in

Module Cut-out Module Cut-outCC-803N 223 x 212 x 55 213 x 86* 9.2 x 4.2 x 2.2 8.5 x 3.4*80-700-0055-00 223 x 212 x 55 213 x 86* 9.2 x 4.2 x 2.2 8.5 x 3.4*CC-804 166 x 106 x 55 146 x 86 6.5 x 4.2 x 2.2 5.75 x 3.4

The CC-803N incorporates a version of our very successful dual engine battery switch cluster (page 52).

The CC-803N is supplied with cables to allow for horizontal or vertical configurations.

The components can also be easily removed and reconfigured if the factory layout does not suit your application.

The CC-804 is equipped to cover essential circuits requirements (bilge, pumps etc) and is fitted with one 50 A CB for DC mains or treatment systems.

It is also supplied with a 135 A 185 Series CB for anchor windlass.

The CC-804 compliments the other modules for either single or dual engine installations.

The 80-700-0055-00 offers the same features as the CC-803N.

The VSR and Emergency parallel switch are combined into one voltage-sensitive switch, and that switch is able to be remote-operated.

Fewer components, more compact.

The layout also allows all cables to be attached from the bottom of the cluster.

Installation diagrams are available on our website: www.bepmarine.com

CC-803N

CC-803N

CC-804

80-700-0055-00


Contour Connect PanelsStand-a lone

The CC-810 is supplied standard with 3 x 701-PM battery switches pre-assembled. Ideal for installing alongside any other Contour Connect Modules.

Both the CC-811T and CC-811PR can be mounted as a stand alone panel or can be attached to other Contour Connect Panels using a CC-J joiner (supplied with panel). Supplied with 2 x 10 A and 2 x 15 A toggle or push-reset CBs and Set-CC-1 label sheet (see page 74).

The CC-12VRC allows

a DC outlet socket

to be placed within

the Contour Connect

panels. It will fit into

the CC-1, CC-2 or

CC-5 panels.

Dimensions - All units This PagePart No. L x W x H mm L x W X H in

Module Cut-out Module Cut-outCC-801 166 x 106 x 55 146 x 86 6.5 x 4.2 x 2.2 5.75 x 3.4CC-810 233 x 106 x 55 213 x 86 9.2 x 4.2 x 2.2 8.5 x 3.4CC-811PR 101 x 106 x 55 82 x 86 4 x 4.2 x 2.2 3.5 x 3.4CC-811T 101 x 106 x 55 82 x 86 4 x 4.2 x 2.2 3.5 x 3.4

The CC-BLANK will

cover an unused hole

in CC-1 and CC-2 .

Attached from the

rear of the panel, it

allows for expanding

with other options at a

later date.

Panels can be joined together to create a clean and compact system.

CC-810 CC-811PR

CC-811PR

CC-811T CC-801

CC-810

CC-811T

CC-12VRC

CC-BLANK


Contour Connect PanelsStand-a lone

The CC-805T is supplied pre-wired with one battery switch, 2 x 10 A and 2 x 15 A toggle circuit breakers. Supplied with SET-CC-1 label sheet (page 74) and back cover to enclose exposed terminals.

The CC-805PR is supplied pre-wired with one battery switch, 1 x 5 A, 2 x 10 A and 1 x 15 A push reset circuit breakers. Supplied with SET-CC-1 label sheet (page 74) and back cover to enclose exposed terminals.

The CC-806T is supplied pre-wired with one battery selector switch, 2 x 10 A and 2 x 15 A toggle circuit breakers. Supplied with SET-CC-1 label sheet (page 74) and back cover to enclose exposed terminals.

The CC-806PR is supplied pre-wired with one selector battery switch, 1 x 5 A, 2 x 10 A and 1 x 15 A push reset circuit breakers. Supplied with SET-CC-1 label sheet (page 74) and back cover to enclose exposed terminals.

The CC-807T is supplied pre-wired with 2 x 5 A, 2 x 10 A, 3 x 15 A and 1 x 20 A toggle CBs. Supplied with SET-CC-1 label sheet (page 74) and back cover to enclose exposed terminals. An economical 8 way circuit breaker panel option. Stackable for vertical or horizontal mounting.

The CC-807PR is supplied pre-wired with 2 x 5 A, 2 x 10 A, 3 x 15 A and 1 x 20 A push reset circuit breakers. Supplied with SET-CC-1 label sheet (page 74) and back cover to enclose exposed terminals. Suitable for essential circuits where circuit breaker needs to be left on. Ideal for helm area giving protection for switching.

The CC-807T-PR is supplied pre-wired with 2 x 10 A, and 2 x 15 A toggle circuit breakers and 2x 10 A and 2 x15 A push reset circuit breakers. Supplied with SET-CC-1 label sheet (page 74) and back cover to enclose exposed terminals.

Dimensions - All units This PageL x W x H mm L x W X H in

Module Cut-out Module Cut-out 166 x 106 x 55 146 x 86 6.5 x 4.2 x 2.2 5.75 x 3.4

CC-805T CC-805PR

CC-806PRCC-806T

CC-807T

CC-807T-PR

CC-807PR


Contour Connect Components

The Contour Connect Kit set Panels are designed for applications where the OEM or panel builder wishes to construct a custom system. They're supplied as empty panels with all necessary mounting hardware, including one CC-joiner.

The CC-1 module will house the following components.701-PM Panel mount battery on/off (page 46).

701S-PM Panel mount battery selector switch (page 46).

185 Series Heavy duty circuit breakers (page 26).

(CC-HDBM must be ordered with 185 circuit breakers, one per breaker).

710-125A Voltage sensitive relay (page 29).

710-125A-DS Voltage sensitive relay dual sense (page 49).

The CC-2 module will house the following components:CLB series (push reset) Carling circuit breakers (page 26).

Toggle Magnetic Hydraulic Airpax Carling circuit breakers (page 25).

The CC-3 module will house the following components:CLB series (push reset) Carling circuit breakers (page 26)

Toggle Magnetic Hydraulic Airpax Carling circuit breakers (page 25)

The CC-4 module is designed for different applications.Application One: For fitting insulated studs in back of panel to prewire assembled panel. (IS-10MM-2). The CC-4 will also accept the 703-300A or 703-500A heavy duty bus bars (page 69) This can be used to terminate negatives at back of panel or for multiple outputs from battery switches.

Application Two: For installing ancillary equipment associated with battery management area.

The CC-5 module will house all the same components as the CC-1.

CC-1

CC-2

CC-3

CC-4

CC-5


Busman CB Panel Mount

The CC-HDBM module must be ordered separately if ordering Busman 184 & 185 series circuit breakers. Mounting hardware for CB and panel attachment is supplied with module.

Contour Connect Components

Solid LinksPart No. Application708-42.5 For horizontal linking of battery switches in the

same panel708-70.0 For horizontal linking of battery switches studs

between 2 separate panels708-107 For vertical linking of battery switches between

panels

The CC-BC back cover clips into the rear of all CC-1 to CC-4 modules (page 60) ensuring all exposed terminals are covered to comply with ABYC specifications. Supplied standard with all CC panel combinations. Ordered separately when ordering CC Kitset panels.

709-300/BD Flexible links are supplied pre-connected with spare links for different orientations (horizontal or vertical) of Contour Connect panels.

Must be ordered separately when ordering CC Kitset panels.

NCB-CC Link bar between circuit breakers. Same bar fits toggle or push reset CBs. Bar can be cut to bring multiple feeds to circuit breakers. Supplied with 800 Series panels or CC-Kitset panel.

708-42.5 Solid terminal links supplied pre-connected with spare links for different orientations (horizontal or vertical) of Contour Connect panels.

Must be ordered separately when ordering CC Kitset panels.

Flexible LinksPart No. Link Terminals (mm x mm, g) (mm, mm)LD-6R-120-CE 6 x 120, 10 6, 10LD-6R-150-BD 6 x 150, 10 6, 10LD-6R-210-BD 6 x 210, 10 6, 10LD-6R-300-BD 6 x 300, 10 6, 10709-150/BD 25 x 150, 4 6, 10709-250/BD 25 x 250, 4 6, 10709-300/BD 25 x 300, 4 6, 10709-150/DD 25 x 150, 4 2 x 10709-250/DD 25 x 250, 4 2 x 10709-300/DD 25 x 300, 4 2 x 10

The Contour Connect panels are supplied standard.Wave strips can be ordered separately and are supplied in pairs of top and bottom strips.

Interlink corner cross joiner for extra rigidity when four corners are placed together. Ordered separately.

Interlink Joiners

CC-BC

CC/WS/CH

CC-JC CC-J

CC-HDBM


ATC Fuse HoldersPart No. Description Pack

80-712-0039-01 6 Way bus/ with 5 mm input stud, cover, joiners

Bulk 24/pack minimum order OEM use only

80-712-0039-00 6 Way bus/ with 5 mm input stud, cover, joiners

Display (blister pack)

ATC-6W/B 6 Way fuse holder screw terminals/with cover


ATC-6WQC/B 6 Way fuse holder Quick Connect/with cover


ATC-6W 6 Way fuse holder screw terminals/with cover and link


ATC-6WQC 6 Way fuse holder Quick Connect/with cover and link


Range HigHligHts

� Allows for multiple fuse holders and Bus bars to be joined together, increasing the number of circuits protected

� Fuse holder inputs can be linked together to form a single continuous fuse holder

� Includes patented Contour Lock system, see-thru clip-on cover and label set (See page 75)

� Available with screw terminals or quick connect terminals

� Max. current/circuit: 30 A; Max. current/block: 100 A; Max. voltage: 32 V DC; Base & cover material: polycarbonate

� Positions for spare fuses

� ATC Fuse holder: 80 x 90 x 47 mm (3.1 x 3.6 x 1.9 in)

� ATC Bus bar: 35 x 90 x 47 mm

ATC Fuse Holder

Fuse holder also available without cover for OEM installation.

Fuse holder Link Part no. 708-00015-00 included with display packed product.

The BEP ATC Fuse Holder provides compact, easy access to fuses with the design integrity only BEP can offer.

ATC Bus Bar The expandable ATC negative Bus uses the BEP Contour Lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located.

Current rating 100 A.

ATC FusesPart No. Rating (A)

604003 3604005 5604007 7.5604010 10604015 15604020 20604025 25604030 30

ATC Fuses

Fuses available 3-30 A

Interrupt capacity: 1000 A DC

Maximum voltage 32 V DC

ATC-6W

80-712-0039-00


12 V DC Receptacles & Plugs

Spare Parts for Sprayproof panel range, rated 20 A DC (see page 38 and 41)

Part No. Type operation

SW-32111 Switch on/off

SW-32113 Switch on/on

SW-32114 Switch on/off/on

SW-32115 Switch (on)off/ momentary

SW-32120 Switch (on)off(on) momentary

SW-32123 Switch on/off/on double pole

SW-M331 Boot Splash proof cover

WAFH-14# Fuse holder

12VPG Plug 16 A

Easy to install, with supplied mounting plate for front panel installation locking ring for rear access installation.

12 V Receptacle

Watertight sealing cap

Compatible with standard 12 V plugs

Maximum current 16 A

Remote buzzer for matrix range

Inline ATC fuseholder

Range HigHligHts

� Corrosion-resistant, marine-grade materials

� Marinco-exclusive, moisture resistant connection system that locks plugs to receptacles securely

Range HigHligHts

� 50 A plugs & sockets for heavy duty DC connections

� Receives 10 AWG (6 mm) cable

Moisture seal ring

LED power indicator light

Interchangeable fuse

Internal strain relief and cord seal

Compatible with standard 12 V receptacles

12VRC

12VBR

12VBP

SW-M331

WAFH-14# 54-27C4

12VBR-BP-DSP

12VPG

SW-32111


Range HigHligHts

� Compact, lightweight 24-12 V DC-DC converter

� High efficiency (>90%) switchmode voltage converter

� Short circuit protected: output drops to 0 V

� Reverse polarity protected: reverts when corrected

� Fast shutdown protects equipment and wiring

� Does not rely on fuses to protect equipment

� Case floating (no DC connection)

� LED state indicators

� Crimp on cable connectors and clip-on mounted bracket supplied

� EMC compliant – As/NZS 2064

AccessoriesDC Conver ter s /Ga lvan ic I so la tor s


L x 75 x 32

in

L x 2.9 x 1.25

Weight

(g)

Input

(V)

Output

(V)

Continuous

Load (A)

Peak Load

(A)

No Load

(mA)DCVR-7A 80 3.2 198 15 - 38 13.2 7 10 < 15DCVR-10A 90 3.5 212 15 - 38 13.2 10 14 < 15DCVR-20A 160 6.25 343 18 - 38 13.2 20 24 < 15

Not recommended for use with halogen lights

Ideal for running 12 V DC electronics (I.E. HF/SSB Radios, high power audio, TV’s, and appliances) off 24 V DC electrical systems, the DC Converter range is the compact, efficient solution to stepping down the load.

WIRING

12V LOADINPUT

COMMON

FUSEFUSE

12VBATTERY

12VBATTERY

12V +12V = 24V

INPUT+18-38V

OUTPUT+13-2VCOMMON

Range HigHligHts

� Gold plated terminals provide superior corrosion resistance for harsh environment exposure

� Prevent galvanic corrosion due to dissimilar metals between boats

� Block DC current from flowing through shore power cable

� Ignition Protected

Galvanic Isolators - 115-230 V, 50/60 Hz AC

Part No. Rating (A) Voltage (V AC)4531001 30 115/2304531011 50/60 115/230

2436 Shaft Brush

Connects prop shaft to bonding system. Eliminates electronic frequency noise from rotating shaft. Arm length 300 mm (12”)

45310014531011

2436 SHAFT BRuSH


204 x 24 x 29 mm

8 x 0.9 x 1.1 in

177 x 15 x 29 mm

7 x 0.6 x 1.1 in

117 x 15 x 29 mm

4.6 x 0.6 x 1.3 in

Range HigHligHts

� Now with easy-fit covers to ABYC standards, with polarity ID

� 4 mm (5/32") stainless steel screws with shakeproof washers

� 2 x 6 mm (1/4") input studs

� Tin-plated, brass-insulated mounting bases with recessed mounting holes to avoid accidental shorts on aluminum surfaces

� Supplied standard with all BEP AC & DC control panels

COveRs

� Flame-resistant flexible plastic

� Color-coded for polarity

� Unique push-on fit

� Supplied standard with bus bars when ordered in display packs (for bulk packaging ordered seperately)

Bat ter y Distr ibut ion ComponentsBus Bar s & Cover s

Bus Bars

Part No. Pack Type

Bus Type

output screws

(4 mm / 5/32")

Input studs

(6 mm / 1/4")

Rating (A)

BB-6W-2S/DSP Display Single 6 2 100



BB-6W-2NC/DSP Display Double 2 x 2 2 x 6 way 100

BB-12W-2NC/DSP Display Double 2 x 12 2 x 12 way 100

BB-4S-150A/DSP Display 4 -way 1 x 4 4 x 6 mm (1/4 stud) 150

BB-6W-2S Bulk Single 6 2 100



BB-6W-2NC Bulk Double 2 x 2 2 x 6 way 100

BB-12W-2NC Bulk Double 2 x 12 2 x 12 way 100

BB-4S-150A Bulk 4 -way 1 x 4 4 x 6 mm (1/4 stud) 150

Bus Bar Covers, 6 W

Part No. Description

BBC-6WR Positive

BBC-6WBK Negative

Bus Bar Covers, 12 W


BBC-12WR Positive

BBC-12WBK Negative

Bus Bar Covers, 24 W


BBC-24WR Positive

BBC-24WBK Negative

All Bus bars in display packs are supplied standard with covers.

173 x 42 x 29 mm

6.8 x 1.7 x 1.13 in

138 x 35 x 29 mm

5.4 x 1.4 x 1.1 in

113 x 42 x 29 mm

4.45 x 1.7 x 1.1 in

BB-4S-150A

BB-6W-2S

BB-6W-2NC

BB-12W-2S

BB-12W-2NC

BB-24W-2S


Range HigHligHts

� Made with high temperature plastic bases

� Stud covers push securely over the threaded stud covering to ABYC standards

� Dual studs deal for +ve / -ve connections, branch circuits, windlass or inverter installations.

Bat ter y Distr ibut ion ComponentsI nsu la ted Studs & Cover s

Single Studs

Part No. Pack Type

Stud Size(mm / in)

Polarity

IS-6MM-1R/DSP Display 6 / 1/4 Positive

IS-6MM-1/DSP Display 6 / 1/4 Negative





IS-6MM-1R Bulk 6 / 1/4 Positive

IS-6MM-1 Bulk 6 / 1/4 Negative





Stud Covers

Part No. Pack Type

Description

80-712-0033-00 Display Red positive 10 mm

80-712-0031-00 Display Black negative 10 mm

80-712-0035-00 Display Double 6 mm

ISC-10R Bulk Red positive 10 mm

ISC-10BK Bulk Black negative 10 mm

ISC-6-2 Bulk Double 6 mm

Dual Studs

Part No. Pack Type

Stud Size (mm / in)

IS-10MM-2/DSP Display 2 x [10 / 3/8]

IS-10MM-2/L/DSP Display 2 x [10 / 3/8] linked

IS-10MM-8MM/DSP Display 1 x [10 / 3/8], 1 x [8 / 5/16]

IS-6MM-2/DSP Display 2 x [6 / 1/4]

IS-10MM-2 Bulk 2 x [10 / 3/8]

IS-10MM-2/L Bulk 2 x [10 / 3/8] linked

IS-10MM-8MM Bulk 1 x [10 / 3/8], 1 x [8 / 5/16]

IS-6MM-2 Bulk 2 x [6 / 1/4]

Reducing sleeve for 8 mm studs, supplied in display packs. Order as ISC-10BK-S for black or ISC-10R-S for red.

Terminal blocks

TB-118-10P: 10 connections; TB-118-6P: 6 connections

Ideal for isolated connections up to 30 A. Suitable for connecting tails from AC and DC panels.

Base material: Phenolic; Current rating 30 A; Max. voltage rating: 300 V AC/DC; Screw size: 6.3 mm (0.25 in)

is-6MM-1 is-6MM-2

isC-10R

is-10MM-1

is-10MM-2

isC-10BK

is-10MM-1R

is-10MM-2/l isC-6-2

is-10MM-8MM

Designed for Yamaha engine installations where the positive cable is supplied with a 10 mm (3/8”) lug and the negative cable is supplied with an 8 mm (5/16”) lug.

48.1mm

(1 7/8”)

29mm

(1 1/8”)

30.77mm(1 3/16”)

42.73mm(1 11/16”)

37.93mm(1 1/2”)11.33mm(7/16”)

35.8mm(1 7/16”)

9.2mm(3/8”)

18mm(11/16”)

44mm

(1 3/4”)

32mm

(1 1/4”)

42.25mm

(1 11/16”)25.5m

m(1 ”)

36mm(1 7/16”)

23.61mm(15/16”)

31mm(1 1/4”)

9.6mm(3/8”)

48.1mm

(1 7/8”)

29mm

(1 1/8”)

30.77mm(1 3/16”)

42.73mm(1 11/16”)

37.93mm(1 1/2”)11.33mm(7/16”)

35.8mm(1 7/16”)

9.2mm(3/8”)

18mm(11/16”)

44mm

(1 3/4”)

32mm

(1 1/4”)

42.25mm

(1 11/16”)25.5m

m(1 ”)

36mm(1 7/16”)

23.61mm(15/16”)

31mm(1 1/4”)

9.6mm(3/8”)

48.1mm

(1 7/8”)

29mm

(1 1/8”)

30.77mm(1 3/16”)

42.73mm(1 11/16”)

37.93mm(1 1/2”)11.33mm(7/16”)

35.8mm(1 7/16”)

9.2mm(3/8”)

18mm(11/16”)

44mm

(1 3/4”)

32mm

(1 1/4”)

42.25mm

(1 11/16”)25.5m

m(1 ”)

36mm(1 7/16”)

23.61mm(15/16”)

31mm(1 1/4”)

9.6mm(3/8”)

48.1mm

(1 7/8”)

29mm

(1 1/8”)

30.77mm(1 3/16”)

42.73mm(1 11/16”)

37.93mm(1 1/2”)11.33mm(7/16”)

35.8mm(1 7/16”)

9.2mm(3/8”)

18mm(11/16”)

44mm

(1 3/4”)

32mm

(1 1/4”)

42.25mm

(1 11/16”)25.5m

m(1 ”)

36mm(1 7/16”)

23.61mm(15/16”)

31mm(1 1/4”)

9.6mm(3/8”)


Maxi-Blade Fuses


Interrupt capacity: 1000 A DC;

Maximum voltage: 32 V DC

ATC Fuses


Interrupt capacity: 1000 A DC


Battery Distribution ComponentsTermina l L ink s & Fuse Holder s

708 Terminal Links

The 708 links are designed for space saving interconnections of terminals when battery distribution modules are linked together. Four standard solid links are available for interconnection of the 701 battery switch with other Battery Distribution products and two larger links which are intended for the heavy duty battery switch.

708-42.5

708-62.0

19 mm

Suits 701

25 mm

Suits 720

709 Terminal Links (Flexible)

In some installations the solid links are not suitable or will not reach the correct terminal. For this purpose we supply the following lengths of flexible links.

Heavy Duty Fuse Holders

704-HDBFH Dual Fuse Holder – housed in same double case as the 700 series products. Stackable with single or double fuse holders. 138 x 69 x 50 mm (5.3 x 2.75 x 2 in)

702-HDBFH Single Fuse Holder – housed in the same single case as the 700 series products. Stackable with single or double fuse holders. 69 x 69 x 50 mm H (2.75 x 2.75 x 2 in)

An economical way of fusing heavy loads 30-80 A. Ideal for battery charger outputs or mains feeds. 6 mm (1/4”) studs accept ring terminals and cables up to 25 mm2 (4 gauge). Fuse is clamped between tinned brass clamps for positive connection. Covers enclose exposed terminals to meet ABYC standards. Fuse holder part numbers are for display packed product. For Bulk packed product add B to part number.

709 Flexible Terminal Links

709-25MM-150 709-25mm- 150 mm (6")

709-25MM-200 709-25mm- 200 mm (8")

709-25MM-300 709-25mm- 300 mm (12")

709-25MM-500 709-25mm- 500 mm (20")

708 Terminal LinksPart No. Distance between centers,

Hole diametermm in

708-42.5 42.5, 10 1.7, 3/8708-54.5 54.5, 10 2.2, 3/8708-64.5 64.5, 10 2.6, 3/8708-68.5 68.5, 10 2.7, 3/8708-62.0 62.0, 12 2.45, 1/2708-102 102, 12 2.45, 1/2

HDBFH Inline Heavy Duty Fuse Holder

For installations where space is tight and fuse needs to be installed inline with the cable. Supplied with 8 mm (8G) tails for inline connections. An economical solution to heavy duty fusing. 80 x 55 x 15 mm (3.15 x 2.15 x .6 in)

Maxi-Blade FusesPart No. Rating (A)

BFHD-30A 30BFHD-40A 40BFHD-50A 50BFHD-60A 60BFHD-70A 70BFHD-80A 80

ATC FusesPart No. Rating (A)

604003 3604005 5604007 7.5604010 10604015 15604020 20604025 25604030 30

Maxi Fuse Holder

702-MFH Maxi Fuse Holder

An economical way of fusing heavy loads 30-80 A. Ideal for battery charger outputs or mains feeds. 6 mm (1/4”) studs accept ring terminals and cables up to 25 mm2 (4 gauge). Fuse is clamped between tinned brass clamps for positive connection. Covers enclose exposed terminals to meet ABYC standards. 71 x 53 x 36 mm (2.8 x 2 x 1.42 in)

NEW


704-4S

The 704-4S was designed for multiple heavy duty connections which need to be isolated from each other. This model completes the range of heavy duty connectors and meets ABYC standards for exposed terminals.

Stud size: 4 x 10 mm (3/8 in); 138 x 69 x 50 mm (5.3 x 2.75 x 2 in)

Battery Distribution ComponentsDis t r ibu t ion Studs /ANL Fuses & Fuse Holder

702-2S Dual Distribution Stud

Designed specifically for transom areas for connecting battery cables from outboards. It also has many other applications where heavy duty positive and negative connections need to be terminated.

(702-2S/L same dimensions as 702-2S including link bar same as IS-10MM-2/L - see page 66.)


L x W x Hin

L x W x HStud Sizemm, in

702 69 x 69 x 50 2.75 x 2.75 x 2 10, 3/8702-2S 69 x 69 x 50 2.75 x 2.75 x 2 2 x (10, 3/8)704-4S 138 x 69 x 50 5.3 x 2.75 x 2 4 x (10, 3/8)704-ANL 138 x 69 x 50 5.3 x 2.75 x 2 10, 3/8

702SB Secondary Bus

Fitted to Distribution Stud 702 allows for small wire connections without cluttering main stud. Terminal screws 4 mm (1/8 inch).

704-ANL Fuse Holder Heavy Duty

Allows fusing of heavy duty accessories between 80-500 A. Mounted in Contour lock mouldings with removable sides. Meets ABYC Standards for exposed terminals.

Stud size 10 mm (3/8 in); 138 x 69 x 50 mm (5.3 x 2.75 x 2 in)

IP250

Ignition protected

Tin plated

Visible fuse status window

6000 A interrupt capacity


ANL Fuse SpecificationsPart No. ANL Fuselinks

Rating (A)IP80 80IP100 100IP150 150IP200 200IP250 250IP300 300IP425 425IP500 500

Fuse viewing window

BEP’s patented Contour Locking System is an innovative feature that allows for multiple battery management components to be connected to each other providing for a clean finished installation. These locking tabs can be found on battery switches, heavy duty buss bars, fuse holders, distribution studs and breaker modules.

702 Distribution Stud

The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections. Contour Lock housing has removable side plates which allows for connections from all sides.

Stud size: 10 mm (3/8 in); 69 x 69 x 50 mm (2.75 x 2.75 x 2 in)


711 Ammeter Shunt Enclosure Specifications

Part No. mm in Description

711L 138 x 69 x 50 5.4 x 2.75 x 2 Takes 2 mini or one maxi shunt

711S 69 x 69 x 50 2.75 x 2.75 x 2 Takes 1 mini shunt

Digital Maxi: 450 A - 50 mV

Analog Mini: 50 A - 50 mV, 100 A - 50 mV, 150 A - 50 mV

711 Ammeter Shunt Enclosure

The 711 provides a protective housing for shunt termination meeting ABYC standards. Shunts ordered separately (see page 30 and 36).

703-500A Distribution BusDesigned to take loads from Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs.

Battery Distribution ComponentsHeav y Dut y Bus Bar s

SpecificationsPart No. mm in Stud Size

mm, in

Rating (A)

703-300A 138 x 69 x 50 5.4 x 2.75 x 2 4 x (10, 3/8) 300703-500A 138 x 69 x 75 5.4 x 2.75 x 2.9 3 x (10, 3/8) 500

703-300A Distribution Bus

Allows multiple terminations for heavy duty negative or positive connections. Modular sizing with Contour Lock housing allows easy grouping and meets ABYC standards for exposed terminals.

Use the 708-64.5 link (page 68) for optional expansion on either the 703-300A or the 703-500A .

BB-6W-2 Multi purpose Bus Bar (Rated 100 A)

Allows for Bus bars to be separated using insulation partition as supplied (as illustrated) or Bus bars can be combined using the link supplied. For DC negative & positive common or separated, or AC Neutral Earth (linked or separate)

Multi-purpose Bus Bar

Part No. mm inBB-6W-2 138 x 69 x 50 5.75 x 2.75 x 2Stud size Terminal screws Rating (A)

6 mm (1/4") 4 mm (5/32") 100

Link

Insulation Partition


706-2W 24hr Essential Circuit Module

Designed for smaller systems where only 2 circuit breakers are required. Supplied with 2 x 10 A Carling CLB Series circuit breakers – push to reset. Dims: 69 x 69 x 70 mm (2.75 x 2.75 x 2.75")

705 Contour Circuit Breaker HD

Allows switchable protection for heavy duty circuits like Windlasses or Davit winches using Busman Heavy Duty thermal circuit breakers (page 26). Modular sizing with Contour Lock housing allows easy grouping. LED to indicate circuit is on. Five standard ratings available.

706-4W 24hr Service Circuit Breaker Module (4 W)

Consists of one 5 A and three 15 A push to reset Carling CLB Series thermal CBs. Suitable for essential circuits such as bilge pump, auto float switch supplies and stereo memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently. This is contained in the contour lock double module. For spare circuit breakers see page 26. Labels: SET-714 Dims:138 x 69 x 75 mm (5.3 x 2.75 x 3")

Contour Circuit Breaker HD

All 138 x 69 x 75 mm

(5.3 x 2.75 x 3")Part No. Rating (A)705-50A 50705-80A 80705-100A 100705-135A 135705-150A 150

Battery Distribution ComponentsBreaker Modules

707 Circuit Breaker Module

Provides 3 CBs ideal for medium duty loads, like waste treatment systems and electric toilets. Designed to separate these loadings from the main DC panel, avoiding voltage spikes. Supplied standard with 1 x 50 A and 2 x 25 A B Series CBs in a Contour Lock housing for easy modulation. Extra CBs available (page 25).

138 x 69 x 75 mm (5.5 x 2.75 x 2.9 in) Labels ordered separately: SET-714.


LabelsCircu i t breaker pane ls

ACCESSoRIES BAIT TANK PuMP 12 V ouTLETS AFT LIGHTS AC MAINS AC MAINS

SET-1NAccessoriesAnchor LightAuto PilotBilge PumpCabin LightsCabin LightsCockpit LightsCompass LightsDC OutletsDepthsounderFreezer Freshwater PumpGPS InstrumentsLPG ControlMast LightNavigation LightsSaltwater PumpShower Drain PumpSpareSpotlightSpreader LightSteaming LightStereoTrim TabsVHFWinchWiper

SET-2NBait Tank PumpBilge Pump AftBilge Pump ForwardBilge Pump MidBilge Pump PortBilge Pump StarboardBlower Boarding LightCabin Lights AftCabin Lights FwdCabin Lights MidCabin Lights PortCabin Lights StarboardDeck Wash PumpElectric ToiletEngine Room LightsFridge Horn Nav Lt’s PortNav Lights StarboardPanel LightsRadarSaloon LightsSSBStartStern LightStopTri Light

SET-3N12V Outlets24V OutletsAft Deck LightBilge Auto Man.Bow LightsDocking LightsEmergency ParallelEngine AlarmEngine BlowersExtraction FanFlood LightsFore Deck LightGalley LtGenerator LightsHolding Tank PumpHouse BatteriesLazerette LightPortRadio BatterySearch LightStarboardStart BatteriesStep LightStrobe LightToilet LtWeather FaxWindex LightWindow Washers

SET-4NAft LightsBedroom/ConverterDavit WinchEngine AlternatorFire SystemFish FinderFishing LightGalley/BathHouse AlternatorIntercomLoadLocker LightMid WiperMid LightsMizzen Spreader LightPlotterPort WiperPreheatSole LightHeater FansStarboard WiperSub MainSump PumpTank Room LightsToilet PumpTowing LightTV/StereoWalvac

SET-5NAC MainsAC OutletsAC OutletsAir ConditioningBattery ChargerCook TopDishwasherDive CompressorDryerFrequencyGensetHeaterHotwater CylinderIce MakerInverterInverter OutletsMicrowaveOvenRefrigerationReverse PolarityShips PowerShore PowerTrash CompactorTV VideoWashing MachineWaste MasterWater Maker

SET-6NAC MainsAccessoriesAnchor WashAutomaticAutopilotAuxiliaryBilge Auto ManualBilge LightsBoom FurlBridge LightsBurglar AlarmCabin FanCB RadioCell PhoneComputerDC MainsFuel TransferGalley FanHatch ControlsHydraulicsLoud HailerMaceratorManualNight LightsPelmet LightsSolar PanelStoveTV Antenna

SET-7NAft Peak LightDeck Flood Lights FwdDeck Flood Lights AftDeck LightsDeck Lights PortDeck Lights StarboardDeck Lights ForwardDeck Lights AftFishing LightsFishing Lights WhiteFishing Lights RedFishing Lights GreenFish Room LightsFish Room PumpFore Deck LightFocsle LightMast Flood Lights FwdMast Flood Lights AftNet RecorderNot Under CommandNUC LightsPlotterPort Flood Lights Shower LightsStbd Flood LightsToilet FanToilet LightWinch Flood Lights

SET-8NAnchor LightBaragraph PowerCabin FansCabin Fans FwdCabin Fans AftCourtesy LtsCourtesy Lts FwdCourtesy Lts MidCourtesy Lts AftDiesel HeaterFire SystemFuel PumpHailerLectrasanLectrasan FwdLectrasan StbdPort Engine ControlsPort IgnitionSat ComShower LightSaloon LightsSpareSpareStabilizerStbd Engine ControlsStbd IgnitionToilet LightWaste Treatment

SET-9NBoiler / HeaterBow ThrusterDC/DC ConverterDeck Lights ForwardDecklights AftDecklights MidDecklights UpperDefrosterGalley LightsGrey Water PumpGuest State LightsHead Pump 1Head Pump 2Master State LightsNav LightsOil PumpPilot House LightsSaloon LightsSearch LightSpareSpareStereoTrim Tab ControlV-Berth LightsVHF LowerVHF UpperWash Down PumpWindlass

SET-10NAir CompressorAir Con GalleyAir Con Guest RoomAir Con Master StateAir Con Pilot HouseAir Con SalonAir Con SaloonAir Con State RoomAir Con V-BerthAir ConditioningAir Conditioning 1Air Conditioning 2Air Conditioning 3Central VacuumCharger GeneratorCharger HouseCharger InverterCompactorEngine Room FansHot Circ PumpIce Maker LowerIce Maker UpperOutlets Engine RoomOutlets ExternalOutlets GalleyOutlets Lower DeckOutlets Upper DeckWater Heater

SET-12N24-12V ReducerAeratorBallast AftBallast ControlBallast FwdBlack Tank AftBlack Tank FwdBlack Water PumpBoom LightBridge LightsBridge SupplyDining LightsFire AlarmFlow AlarmInterior LightsLuff LightModemNav Area FanOutlets AftOutlets FwdOutlets Mid Outlets PortOutlets StbdPort EngineStbd EngineStep LightsStrobeRiding Light

ANCHoR LIGHT BoILER/HEATER AIR CoMPRESSoR 12-12 V REDuCERAFT PEAK LIGHT


AFT BILGE ALARM 210KHz TX 12 V ouTLETSFLyBRIDGE AC ouTLETS AFT 24 HouR CIRCuITS 27 MEG

SET-13NAft Bilge AlarmBilge AlarmBilge Alarm TestBilge AutoBilge LightsBilge ManualBilge Pump Auto/ManualFwd Bilge AlarmHigh Water AlarmMid Bilge AlarmPort Aft Bilge AlarmPort Aft Bilge AutoPort Aft Bilge ManualPort Fwd Bilge AlarmPort Fwd Bilge AutoPort Fwd Bilge ManualPort Mid Bilge AlarmPort Mid Bilge AutoPort Mid Bilge ManualStbd Aft Bilge AlarmStbd Aft Bilge AutoStbd Aft Bilge ManualStbd Fwd Bilge AlarmStbd Fwd Bilge AutoStbd Fwd Bilge ManualStbd Mid Bilge AlarmStbd Mid Bilge AutoStbd Mid Bilge Manual

SET-14N210KHz TX33KHz TXAft Hold LightCockpit FreezerEngine ControlsFridge/FreezerFire PumpFluxgate CompassFlybridge FreezerFuel GaugeFuel Transfer PortFuel Transfer StbdFwd Hold LightGantry LightsHolding Tank PortHolding Tank StbdMasthead LightPilot Light RedPilot Light WhitePort Fuel FilterRudder IndicatorStbd Fuel FilterSteeringToilet AftToilet FwdTowing Light AmberTowing Light WhiteTuna Tubes

SET-15N12v Outlet FlybridgeArch LightsBilge Pump ClutchCabin HeaterCompassDry Head PumpDemisterEngine Clutch PumpFlybridge HatchFlybridge WipersFreezer ClutchFwd Stateroom LightsGreywater Pump 1Greywater Pump 2Guest Cabin StereoInmarsatInstrument LightsInstruments FlybridgeInstruments PilothouseMaster Head LightsNav Area LightsOverhead LightsOverhead Saloon LightsSaloon WipersSecurity SystemUnderfloor Lights24v DC MainsBow Bilge High Water

SET-16NAC Outlets AftAC Outlets Aft CabinAC Outlets CockpitAC Outlets DeckAC Outlets FwdAC Outlets Fwd CabinAC Outlets GalleyAC Outlets Guest CabinAC Outlets MidAC Outlets PortAC Outlets SalonAC Outlets SaloonAC Outlets StateroomsAC Outlets StbdAC Outlets WheelhouseAircon AftAircon Aft DeckAircon CabinAircon FwdAircon Fwd DeckAircon HelmAircon Pump Aircon Port Aircon StbdAirhandler Fwd StateroomAirhandler Mstr StateroomAirhandler PilothouseAirhandler Saloon

SET-17N24 Hour CircuitsAft Bilge Pump Auto / ManAft HeadAlarm MuteDepth / SpeedElectronicsEngine AlarmFansFwd Bilge Pump Auto / ManFwd HeadGalley / Head VentGalley FridgeGas StoveGaugesHead PumpLevel IndicatorLightsMid Bilge Pump Auto / ManNav & Inst LightsOil PressurePt EnginePt Engine Start / StopStbd EngineStb Engine Start / StopSum LogSynchronizerWater TempWindshield

SET-18N27 MegAft Holding TankAft Water HeaterCabin OutletsCockpit FridgeDC Mains 1DC Mains 2DehumidifierDVDEngine BlowerEngine Room OutletsEntertainmentFlybridge MainFWD Holding TankFWD Water HeaterGalleyGas SolenoidGeneratorGFCI OutletHatch LifterHelm MainHour MeterLaundryLPG/CooktopNavigationRangeTV /DVDUHF

SET-19N12V Battery Charger24hr Bilge Pump24V Battery Charger12V Battery ChargerBilge Pump Port FwdBilge Pump Port MidBilge Pump Stbd AftBilge Pump Stbd FwdBilge Pump Stbd MidBoarding PlatformBulwark LightsBunk LightsCable Master DesalinatorDishwasherElectric WindowsEngine ControlsMaceratorOil PumpPitch ControlPort Air ConPort EngineSonarStoreroom LightsSpaStbd Air ConStbd Engine TV

SET-20N12v Aux HornAft FridgeAlternatorAnchor WinchBathroom FanBathroom OutletsBridge SupplyDocking LightsEngine Room Bilge AlarmFax Fish FinderHolding Tank GaugeIcemakerInverter/ChargerLake Water Master HeadRCDResetSalon LightsShaver OutletsSounderSpeedSum LogToilet PortToilet StbdTV liftWind Instruments

SET-22NAlarmsCCTVCockpit FridgeCommunicationsControl Max 2.0Deck LightsEarth Leakage LightsEmergency ParallelEngine Room MainEquipment RoomFlybridge LightsFresh Water Pump PortFresh Water Pump StbdGenset StartGenset StopGrillHead/Galley VentHF RadioIgnition StartMid Hold LightsRadio LightRadiosRefrigeratorReverse Polarity TestUHF RadioVHF RadioWheelhouse LightsWine Cooler

SET-23NAir Con FlybridgeAir Con FwdAir Con PortAir Con StbdBerth LightsBlowerCabin Lights MainCooling Pump 1Cooling Pump 2DischargeDischargeDischargeDischargeEmergency LightsGallery FridgeHelm LightsMaceratorMaster Cabin LightsPort Engine ControlsPort Engine ControlsPort Engine ControlsQuartz LightsStbd Engine ControlsStbd Engine ControlsStbd Engine ControlsStereo MemoryStorage Bin PumpWaterblaster

SET-FRENCHCabine AvantCabine BabordCabine TribordDessalinisateurDiversECL InterieurEssuie-GlaceFeu De HuneFeu De MouillageFeu De PontFeux De NavigationFlaps Trim TabsGPSGroupe D’EauGuindeauInstrumentsPilote AutomatiquePompe De CalePrise 12VRefrigerateurSalle De BainSalle MachineSondeurStereoTable A CarteTimonerieVentilateur De CaleVHF

SET-FRENCH 2Auxiliaire 1Auxiliaire 2AvertisseurCabin 2Cabin 3Cabine ICentrale NavChauffageChauffe-EauConfortCongelateurDiversEclairage BabordEclairage CarreEclairage NacelleEclairage TribordElectroniqueFeu TricoloreHi-FiMicro-OndesPompe BabordPompe De LavagePompe DouchePompe TribordRadarSpotsToilettesWinch

12 V BATTERy CHARGER 12 V AuX HoRN BoILER/HEATER AIR CoN

FLyBRIDGE CABINE AVANT AuXILIARE 1

LabelsCircu i t breaker pane ls


LabelsSpr ayproof/Bat ter y Management Pane ls

SET-MSPAlarm SystemBilge Pump FWDBilge Pump MIDBilge Pump AFTBilge Pump PortBilge Pump StarbBilge Pump Engine RoomBoarding PlatformCable Master24 HourDavitDC MainsEngine ControlsEngine Room LightsEngine Controls PortEngine Controls STBDElectric ToiletFire SystemFridgeFlybridge MainHalyard WinchInverterLectrasanOil Transfer PumpSheetwinchShower Drain PumpStereo MemorySump PumpWaste TreatmentWinch

SET-MSP2Aft Bilge OverideAuto PilotBattery ChargerBattery ChargerBow Thruster ControlDC OutletsDeckwashElectronicsCockpit PumpsEngine MemoryEngine Room LightsEntertainmentFlybridge FridgeFresh Water PumpFwd Bilge OverideGalley FridgeHigh WaterHolding TankHornLightsLightsMid Bilge OverideNav LightsSaltwater PumpSpot LightPasarelleTrim TabsVHFWinchWipers

SET-MSP324Hour LightsBow Bilge PumpBow bilge OverrideBow ThrusterCathodic ProtectionCharts/SounderCockpit MainCO DetectorCockpit FridgeElectronics MainElectric ControlsElectric HeadGenset Battery ChargerHatch LifterHelm MainHead MaceratorPort Battery ChargerPort Engine BlowerPort ControlsSaloon MainsStbd ControlsStereoStereo AmplifierStbd Battery ChargerStbd Engine Blower Wiper MidWiper PortWiper StbdAccessoriesControls

SET-MSP424V House Voltmeter FeedBilge AlarmBilge Pump 24hrBilge Pump Aft High WaterBilge Pump Fwd High WaterBilge Pump Mid High WaterBilge PumpsBilge Pumps MainFlybridge 12V MainsFlybridge 24V MainsGenset BlowerHigh Water AlarmHouse Battery ChargerHouse Battery MeterHouse MainLower 12V MainsLower 24V MainsPort Aft Bilge PumpPort Batter MeterPort Fwd Bilge PumpPort Mid Bilge PumpShower SumpStbd Aft Bilge PumpStbd Battery MeterStbd Fwd Bilge PumpStbd Mid Bilge PumpToiletTwin DiskTwin Disk PortTwin Disk Stbd

SET-714Anchor WinchBilge Pump AftBilge Pump FwdBilge Pump MidBilge Pump PortBilge Pump StarbBow ThrusterDavit WinchDC Mains 1DC Mains 2Halyard WinchHead 1Head 2Holding TankInverterMemory CircuitsSecurity SystemSheet WinchSpareWaste Treatment 1Waste Treatment 2

SET-1SPAnc. Light Nav. LightsAccessoriesAeratorAnchor LightAutopilotBait Tank PumpBilge Pump Bilge Pump Auto Man BlowerCabin LightsCockpit LightsDC OutletsDeck WashDepth SounderFlood LightsFreshwater PumpFridgeGPSHornInst. LightsInstrumentsNavigation LightsRadioSaltwater PumpSpot LightsTrim TabsWinchWiper

SET-2SPAnchor LightBilge Auto ManBoom LightCabin LightCockpit LightsCompass LightDeck LightsDepth SounderE/R BlowerFreezerHot Tub LightHot Tub PumpInstrumentsLocker LightsNav LightsPort Nav LightsPort wiperShower Drain PumpSpare 1Spare 2Spare 3Stbd Nav LightsStbd WiperSteaming LightStern LightSumlogTransom LightsTri Light

SET-1SP/F<Mouillage Navigation>AccessoiresAccessoiresAerateurAppliques De CockpitAppliques InterieuresAvertisseurEssuie-Glace 1Essuie-Glace 2Essuie-Glace 3Feu De MouillageFeu De NavigationFrigoGPSGroupe D’EauInstrumentsLecteurs De CartesPilote AutomatiquePompe Cale <Auto Manuel>Pompe De CalePompe De LavagePompe De VidangePrises De CourantRadioSondeurSpotsVentilateurWinch

SET- LBL-WPAccessoriesAeratorAnchor LightsAutopilotBait Tank PumpBilge PumpBlowerCabin LightsCockpit LightsDC OutletsDeck WashDepth SounderFreshwater PumpFridgeGPSHornInst. LightsInstrumentsLogNavigation lightsRadarSpareSpot LightsStereoStern LightTrim TabsVHFWiper

CSP6

ACCESSoRIES ANCHoR LIGHT ACCESSoRIES

900-6WP

NAVIGATIoNLIGHTS

CMP-6WP

800-MS1-4ALARM SySTEM

800-MS1-4

AFT BILGE oVERRIDE 24 HouR LIGHTS 24V HouSEVoLTMETER FEED

706 - 707

WINCH

NOTE:The 900-6WP applies to the superceded WP-Panel range - 4WP, 6WP and 5WPS.The complete range of BEP labels are listed in a quick reference table on our website:

www.bepmarine.com

Interior series switch plates

SET- LBL-CMPAccessoriesAeratorAnchor LightsAutopilotBait Tank PumpBilge PumpBlowerCabin LightsCockpit LightsDC OutletsDeck WashDepth SounderFreshwater PumpFridgeGPSHornInst. LightsInstrumentsLogNavigation lightsRadarSpareSpot LightsStereoStern LightTrim TabsVHFWiper

FRESHWATERPuMP

800-MS1-4 800-MS1-4

CSP6 CSP6

SET-18N27 MegAft Holding TankAft Water HeaterCabin OutletsCockpit FridgeDC Mains 1DC Mains 2DehumidifierDVDEngine BlowerEngine Room OutletsEntertainmentFlybridge MainFWD Holding TankFWD Water HeaterGalleyGas SolenoidGeneratorGFCI OutletHatch LifterHelm MainHour MeterLaundryLPG/CooktopNavigationRangeTV /DVDUHF

SET-FRENCH 2Auxiliaire 1Auxiliaire 2AvertisseurCabin 2Cabin 3Cabine ICentrale NavChauffageChauffe-EauConfortCongelateurDiversEclairage BabordEclairage CarreEclairage NacelleEclairage TribordElectroniqueFeu TricoloreHi-FiMicro-OndesPompe BabordPompe De LavagePompe DouchePompe TribordRadarSpotsToilettesWinch


LabelsBat ter y Swi tches /Contro l Center /Contour Connec t

2

4

6

8

10

12

14SET-715 contains the 3 most commonly requested labels out of set 713 without the need to purchase a full label set.

Labels can be purchased separately under the following part numbers

1. 713-HB

2. 713-PS

3. 713-SS

4. 713-EP

5. 713-INV

6. 713-BT

7. 713-SB

8. 713-RAD

9. 713-GEN

10. 713-W

11. 713-B1

12. 713-B2

13. 713-MS

14. 713-CH

SET-715

Battery Switches 701-720

Battery Switches

Battery Control Center

SET-CC-1 labels are supplied standard with any 800 series module containing toggle or push reset circuit breakers.

SET-CC-A labels are supplied standard with any 800 series module containing the heavy duty Busman circuit breaker.

CIDOHTACNOITCETORP

TIVAD

EGLIBTFA PMUP

SLORTNOCENIGNE

TROP

SCINORTCELE

ENIGNESLORTNOC

MOOR ENIGNESTHGIL

YRETTABREGRAHC

EGLIBDWF PMUP

EGLIBDIM PMUP

EGLIBTROP PMUP

EGLIBDBTS PMUP

PMUP EGLIBMOOR ENIGNE

OCROTCETED

NIAM CD

CDSTELTUO

SLORTNOCENIGNE

DBTS

ERIFMETSYS

REFSNARTLEUF

PMUPYRETTAB

TROP

REGRAHC

NASARTCEL OERETS

OERETSYROMEM

TELIOT

YRETTABDBTS

REGRAHC

ERAPS

YRETTABESUOH

REGRAHC

RETAW HGIH

GNIDLOHKNAT

RETAW HSERFPMUP

EGDIRF STHGIL

ERAPS

PMUP PMUS

SBAT MIRT

HCNIW

DC MAINS

DECKWINCH

PUMPS

SALOONMAINS

TOILET

FLYBRIDGEMAINS

ANCHORWINCH

DAVIT

DOCKINGWINCH

HELMMAIN

LECTRASAN

WINCH

Heavy Duty Circuit Breaker Modules

Circuit Breaker Modules

SET-CC-A

SET-CC-1

713

SET-CC-BCC-1


LabelsGener at ion 2 /Micro/ Inter ior Pane ls

.

LBL-MIC1

LABEL SET SET-G2-1

ACCESSORIES

AERATOR

ANCHOR LT

BAIT TANK

BILGE PUMP

AUTO B/P MAN

BLOWER

CABIN LIGHTS

COCKPIT LTS

DC OUTLETS

DECK WASH

DN WINCH UP

ELECTRONICS

ENGROOM LTS

FLOOD LIGHTS

FW PUMP

FRIDGE

GPS

HORN

INST. LIGHTS

INSTRUMENTS

NAV LIGHTS

RADIO

SW PUMP

SPOT LIGHTS UP PORT DN

UP STBD DN

WIPER

LABEL SET SET-G2-2

B/PUMP PORT

B/PUMP STBD

B/PUMP FWD

B/PUMP MID

B/PUMP AFT

B/PUMP ENG RM

COMPASS LT

DECK LTS

STEAMING LT

NAV LTS PT

NAV LTS STBD

STEP LTS

STERN LT

WIPER PT

WIPER MID

WIPER STBD

WASHERS

FREEZER

H/TANK PUMP

SUMP PUMP

LOCKER LTS

PANEL LTS

TRI LT

BOW LTS

SHOWER LT

SHOWER PUMP

SPARE

SPARE

Spray-Proof Panels Generation II ( page 34)

Sprayproof Switch Panels - Micro

Contour Interior Series Monitor Panels

B/PUMP AFT COMPASS LIGHT NAV LTS STBD WIPER MID

SET-1002

SET-1001


Reference chartsVol t age drop, Cab le s i ze , Leng th

To convert meters to feet, divide meter measurement

by 0.305

ABYC specs ask for 3% maximum voltage drop [VD] for navigation lights, switch board feeders, bilge blowers and electronic equipment. Other circuits ie motors and general lighting can have a maximum 10% VD.

The chart shows conductors in an ambient temperature of 30ºC. Engine room temperatures are assumed at 50ºC. This requires a rating decrease of 15% ampacity.

Example 1: A 10 A WG cable in a 12 V circuit has a total cable run of 40 feet from the battery to the load and back.

Table A Shows that the maximum amperage this cable can carry without exceeding a 3% voltage drop is 5 A.

If a 10% Voltage drop is acceptable, Table B shows that this rises to 25 A. Because of the relatively long cable run, the voltage drop is the limiting factor in cable sizing.

Example 2: A 12 V bilge pump draws 8 A and is situated 30’ from the battery, so the total cable run is 60’.

To select a cable that will keep the voltage drop below 3%, a builder would use the 12 V columns in Table A, and look down the left hand column to 10 A (the closest reading above 8 A). The numbers to the right are AWG sizes based on total cable runs. For 60’ 6 AWG is listed In this case.


METER PoSITIoN 1METER PoSITIoN 1

CONTROL


CONTROL


CONTROL


CONTROL

Voltage: AC DC 12V 24V 110V 230V

Backlighting: 12V 24V

Meters: Yes Blank

Digital: 600-ACM 600-DCM 600-TLM-N

600-VM3 600-TG 600-SOM

Meter Position: 1 2 3 4

Anlg Volts DC: 8-16 16-32


Anlg Amps DC: 0- 50 0-100 0-150


Anlg Volts AC: 0-150 0- 300


Anlg Amps AC: 0-60 0-100AAC


NAV LTS

ANCHOR LTS

CABIN LTS

SPOT LTS

5A

5A

10A

15A

(See label index pages 64-65)

Custom Panel Layouts

Although the panels shown in this catalog are our standard range, there are a number of changes that can be made to fit the needs of custom and production boatbuilders. For example, a panel can be made up with eight circuit breakers, four systems in operation lights plus a meter, or a panel can consist of a mixture of analog and digital meters if required.

If the panel involves a total custom layout, as described above, a specific part number will be applied to that panel and quoted accordingly.

If the design is unable to be achieved we will notify the customer.

Alternatively a customer may request a standard panel with circuit breakers laid out to their requirements with labels factory fitted. This involves a personalized layout charge with the following part numbers applying, eg:

901V is ordered as NPF-901V.

902A-12V-12V is ordered as NPF-902A-12V-12V

When ordering personalized panels see pages 64-65 for our label selection. We can also do specific label sets, priced per-job.


Notes

82 LEADING ELECTRICAL DESIGN

Notes

lcd qvga color ac and dc maxi fuse · czone™ is what you want in a digital control system...

Documents