laboratory name tcr advanced engineering ...s.no discipline / group materials or products tested...
TRANSCRIPT
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
Permanent Facility
1 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Chromium ASTM E1251: 2017
2 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Copper ASTM E1251: 2017
3 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Lead ASTM E1251: 2017
4 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Magnesium ASTM E1251: 2017
5 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Manganese ASTM E1251: 2017
6 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Nickel ASTM E1251: 2017
7 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Silicon ASTM E1251: 2017
8 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Tin ASTM E1251: 2017
9 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Titanium ASTM E1251: 2017
10 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Zinc ASTM E1251: 2017
11 CHEMICAL- METALS& ALLOYS
Aluminium & its alloys Iron ASTM E1251: 2017
12 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Aluminum ASTM E415: 2017
13 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Aluminum IS 8811: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 1 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
14 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Carbon IS 8811: 2018
15 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Carbon ASTM E415: 2017
16 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Chromium ASTM E415: 2017
17 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Chromium IS 8811: 2018
18 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Copper IS 8811: 2018
19 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Copper ASTM E415: 2017
20 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Manganese ASTM E415: 2017
21 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Manganese IS 8811: 2018
22 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Molybdenum IS 8811: 2018
23 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Molybdenum ASTM E415: 2017
24 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Nickel ASTM E415: 2017
25 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Nickel IS 8811: 2018
26 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Niobium IS 8811: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 2 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
27 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Niobium ASTM E415: 2017
28 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Nitrogen ASTM E415: 2017
29 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Nitrogen IS 8811: 2018
30 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Phosphorous IS 8811: 2018
31 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Phosphorous ASTM E415: 2017
32 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Silicon ASTM E415: 2017
33 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Silicon IS 8811: 2018
34 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Sulfur ASTM E415: 2017
35 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Sulfur IS 8811: 2018
36 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Tin ASTM E415: 2017
37 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Tin IS 8811: 2018
38 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Titanium IS 8811: 2018
39 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Titanium ASTM E415: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 3 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
40 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Tungsten ASTM E415: 2017
41 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Tungsten IS 8811: 2018
42 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Vanadium IS 8811: 2018
43 CHEMICAL- METALS& ALLOYS
Carbon Steel (low carbon, mediumcarbon & high carbon)
Vanadium ASTM E415: 2017
44 CHEMICAL- METALS& ALLOYS
Copper & its alloys Aluminum BS 15079: 2015
45 CHEMICAL- METALS& ALLOYS
Copper & its alloys Antimony BS 15079: 2015
46 CHEMICAL- METALS& ALLOYS
Copper & its alloys Iron BS 15079: 2015
47 CHEMICAL- METALS& ALLOYS
Copper & its alloys Lead BS 15079: 2015
48 CHEMICAL- METALS& ALLOYS
Copper & its alloys Manganese BS 15079: 2015
49 CHEMICAL- METALS& ALLOYS
Copper & its alloys Nickel BS 15079: 2015
50 CHEMICAL- METALS& ALLOYS
Copper & its alloys Phosphorous BS 15079: 2015
51 CHEMICAL- METALS& ALLOYS
Copper & its alloys Silicon BS 15079: 2015
52 CHEMICAL- METALS& ALLOYS
Copper & its alloys Sulfur BS 15079: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 4 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
53 CHEMICAL- METALS& ALLOYS
Copper & its alloys Tin BS 15079: 2015
54 CHEMICAL- METALS& ALLOYS
Copper & its alloys Zinc BS 15079: 2015
55 CHEMICAL- METALS& ALLOYS
Metallic Material Salt Spray Test ASTM B117: 2018
56 CHEMICAL- METALS& ALLOYS
Metallic Material Salt Spray Test IS 9844: 2016
57 CHEMICAL- METALS& ALLOYS
Metallic Material Salt Spray Test ISO 9227: 2012
58 CHEMICAL- METALS& ALLOYS
Metallic material by EnergyDispersive Spectrum of X-RAY EDS
chemical composition of materialfrom Boron - Uranium elements
ASTM E1508: 2012
59 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Chromium ASTM E1476: 2014
60 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Cobalt ASTM E1476: 2014
61 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Copper ASTM E1476: 2014
62 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Iron ASTM E1476: 2014
63 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Lead ASTM E1476: 2014
64 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Manganese ASTM E1476: 2014
65 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Molybdenum ASTM E1476: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 5 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
66 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Nickel ASTM E1476: 2014
67 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Niobium ASTM E1476: 2014
68 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Tin ASTM E1476: 2014
69 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Titanium ASTM E1476: 2014
70 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Tungsten ASTM E1476: 2014
71 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Vanadium ASTM E1476: 2014
72 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Zinc ASTM E1476: 2014
73 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Aluminum ASTM E3047: 2016
74 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Carbon ASTM E3047: 2016
75 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Chromium ASTM E3047: 2016
76 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Cobalt ASTM E3047: 2016
77 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Cobalt ASTM E3047: 2016
78 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Copper ASTM E3047: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 6 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
79 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Iron ASTM E3047: 2016
80 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Manganese ASTM E3047: 2016
81 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Molybdenum ASTM E3047: 2016
82 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Niobium ASTM E3047: 2016
83 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Phosphorous ASTM E3047: 2016
84 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Silicon ASTM E3047: 2016
85 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Sulfur ASTM E3047: 2016
86 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Titanium ASTM E3047: 2016
87 CHEMICAL- METALS& ALLOYS
Nickel & its alloys Titanium ASTM E3047: 2016
88 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Aluminum IS 9879: 2015
89 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Aluminum ASTM E1086: 2014
90 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Carbon IS 9879: 2015
91 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Carbon ASTM E1086: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 7 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
92 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Chromium ASTM E1086: 2014
93 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Chromium IS 9879: 2015
94 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Cobalt IS 9879: 2015
95 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Cobalt ASTM E1086: 2014
96 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Copper ASTM E1086: 2014
97 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Copper IS 9879: 2015
98 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Manganese IS 9879: 2015
99 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Manganese ASTM E1086: 2014
100 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Molybdenum ASTM E1086: 2014
101 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Molybdenum IS 9879: 2015
102 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Nickel IS 9879: 2015
103 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Nickel ASTM E1086: 2014
104 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Niobium ASTM E1086: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 8 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
105 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Niobium IS 9879: 2015
106 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Nitrogen IS 9879: 2015
107 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Nitrogen ASTM E1086: 2014
108 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Phosphorous IS 9879: 2015
109 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Phosphorous ASTM E1086: 2014
110 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Silicon IS 9879: 2015
111 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Silicon ASTM E1086: 2014
112 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Sulfur ASTM E1086: 2014
113 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Sulfur IS 9879: 2015
114 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Titanium ASTM E1086: 2014
115 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Titanium IS 9879: 2015
116 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Tungsten IS 9879: 2015
117 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Tungsten ASTM E1086: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 9 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
118 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Vanadium ASTM E1086: 2014
119 CHEMICAL- METALS& ALLOYS
Stainless Steel & Tool Steel Vanadium IS 9879: 2015
120 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous material Surface Roughness Measurement ASME B46.1: 2009
121 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous materials Ferrite Measurement byFerritoscope
ASTM A799/A799M:2015
122 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material ASTM G28 Method A ASTM G28: 2015
123 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test ASTM A370: 2018
124 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test ASTM E190: 2014
125 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test ASTM E290: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 10 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
126 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test IS 1599: 2017
127 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test IS 1239: 2004
128 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test IS 3600 (Part 6): 2018
129 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test EN 5173: 2017
130 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test ASME Sec IX: 2017
131 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend Test IS 3600 (Part 7): 2019
132 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Bend test of Reinforcement bar IS 1786: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 11 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
133 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ASTM A370: 2018
134 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ASTM E10: 2018
135 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test IS 1500 (Part I): 2013
136 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test EN 1043_1: 1996
137 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ISO 6506_1: 2014
138 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ASTM E10: 2018
139 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test IS 1500 (Part I): 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 12 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
140 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test EN 1043_1: 1996
141 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ASTM A370: 2018
142 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ISO 6506_1: 2014
143 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ASTM E10: 2018
144 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test IS 1500 (Part I): 2013
145 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test EN 1043_1: 2017
146 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ASTM A370: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 13 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
147 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Brinnel Hardness Test ISO 6506_1: 2014
148 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Charpy V notch Impact Test (+30 to-196 degree centigrade)
ASTM E23: 2018
149 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Charpy V notch Impact Test (+30 to-196 degree centigrade)
ASTM A370: 2018
150 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Charpy V notch Impact Test (+30 to-196 degree centigrade)
ISO 148: 2017
151 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Charpy V notch Impact Test (+30 to-196 degree centigrade)
IS 3600 (Part 2): 2019
152 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Charpy V notch Impact Test (+30 to-196 degree centigrade)
EN 10045: 1990
153 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material De-carburization Depth ASTM E1077: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 14 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
154 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material De-carburization Depth IS 6396: 2018
155 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation ASTM A370: 2018
156 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation ASTM E8: 2016
157 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation IS 1608( Part-1): 2018
158 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation EN ISO 6892: 2016
159 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation ASME Sec IX: 2017
160 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation EN 15614_1: 2012
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 15 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
161 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation API 1104: 2011
162 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation IS 3600 (Part 1): 2019
163 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Elongation EN 4136: 2013
164 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Flattening/Flaring Test(Tubes/Pipes)
ASTM A370: 2018
165 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Flattening/Flaring Test(Tubes/Pipes)
SA 370: 2018
166 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Flattening/Flaring Test(Tubes/Pipes)
ASTM B111: 2016
167 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Flattening/Flaring Test(Tubes/Pipes)
IS 1239: 2011
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 16 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
168 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Full size breaking / Tensile Test /Proof Load - Studs & Bolts
ASTM/SA 370: 2018
169 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Full size breaking / Tensile Test /Proof Load - Studs & Bolts
IS 1367 (Part 3): 2017
170 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Full size breaking / Tensile Test /Proof Load - Studs & Bolts
ISO 898: 2013
171 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Full size breaking / Tensile Test/Studs & Bolts
ASTM/SA 193: 2017
172 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Inclusion Rating ASTM E45: 2018
173 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Inclusion Rating IS 4163: 2017
174 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Linear Measurement TCR/MET/WI17: 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 17 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
175 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load IS 1608 (Part-1): 2018
176 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load/Shear Test ASTM A370: 2018
177 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load/Shear Test ASTM E8: 2016
178 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load/Shear Test ASME Sec IX: 2017
179 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load/Shear Test EN 15614_1: 2012
180 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load/Shear Test API 1104: 2011
181 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load/Shear Test IS 3600 (Part 1): 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 18 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
182 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Load/Shear Test EN 4136: 2013
183 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Macro Etch Test ASTM E340: 2015
184 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Macro Etch Test ASTM E381: 2017
185 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Macro Etch Test EN ISO 17639: 2013
186 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Macro Etch Test IS 3600 (Part 9): 2019
187 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Macro Test EN ISO 15614-1: 2017
188 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Macro Test ISO/TR 16060: 2003
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 19 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
189 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Method A Ferric Sulfate-SulfuricAcid Test
ASTM G28: 2015
190 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Micro Examination, Grain SizeMeasurement, General Micro-structure
ASTM E112: 2013
191 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Micro Examination, Grain SizeMeasurement, General Micro-structure
ASTM E407: 2007
192 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Micro Examination, Grain SizeMeasurement, General Micro-structure
ASTM E3: 2011
193 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Micro Examination, Grain SizeMeasurement, General Micro-structure
ASTM E1351: 2001
194 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Micro Examination, Grain SizeMeasurement, General Micro-structure
ASTM A247: 2019
195 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Micro Examination, Grain SizeMeasurement, General Micro-structure
ASM HandbookVolume 9: 2004
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 20 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
196 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Micro Examination, Grain SizeMeasurement, General Micro-structure
IS 3600 (Part 9): 2019
197 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Nodularity in SGI Iron IS 7754: 2018
198 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Load - Nuts ASTM/SA 370: 2018
199 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Load - Nuts ASTM/SA 194: 2018
200 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Load - Nuts IS 1367 (Part 6): 2015
201 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress ASTM A370: 2018
202 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress ASTM E8: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 21 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
203 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress IS 1608 ( Part-1): 2018
204 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress EN ISO 6892: 2016
205 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress ASME Sec IX: 2017
206 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress EN 15614_1: 2012
207 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress API 1104: 2011
208 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress IS 3600 (Part 1): 2019
209 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Proof Stress EN 4136: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 22 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
210 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Pull out test / push out test - Tube totube sheet mock up
ASME Sec VIII Div 1:2017
211 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Pull out test / push out test - Tube totube sheet mock up
TCR/MEC/WI07: 2019
212 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Quantitative Metallography ASTM E562: 2011
213 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rebend test of Reinforcementbar/TMT bar
IS 1786: 2013
214 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area ASTM E8: 2016
215 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area IS 1608 (Part-1): 2018
216 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area EN ISO 6892: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 23 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
217 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area ASME Sec IX: 2017
218 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area EN 15614_1: 2012
219 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area API 1104: 2011
220 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area IS 3600 (Part 1): 2019
221 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Reduction in Area EN 4136: 2013
222 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test IS 1586 (Part I): 2018
223 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ASTM E18: 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 24 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
224 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ASTM A370: 2018
225 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ISO 6508_1: 2015
226 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test IS 1586 (Part I): 2018
227 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ASTM E18: 2019
228 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ASTM A370: 2018
229 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ISO 6508_1: 2015
230 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test IS 1586 (Part I): 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 25 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
231 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ASTM E18: 2019
232 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ASTM A370: 2018
233 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Rockwell Hardness Test ISO 6508_1: 2015
234 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material SEM Analysis ASM HandbookVolume 9: 2004
235 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile test EN ISO 6892: 2016
236 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test EN 4136: 2013
237 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test ASTM A370: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 26 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
238 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test ASTM E8: 2016
239 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test IS 1608 (Part I): 2018
240 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test EN ISO 6892: 2016
241 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test ASME Sec IX: 2017
242 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test EN 15614-1: 2012
243 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test API 1104: 2011
244 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Tensile Test IS 3600 (Part 1): 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 27 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
245 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Thickness of Coating ASTM B487: 2013
246 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength ASTM A370: 2018
247 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength ASTM E8: 2016
248 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength IS 1608 (Part I): 2018
249 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength EN ISO 6892: 2016
250 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength ASME Sec IX: 2017
251 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength API 1104: 2011
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 28 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
252 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength IS 3600 (Part 1): 2019
253 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Ultimate Tensile Strength EN 4136: 2013
254 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test IS 1501 (Part 1): 2013
255 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM E384: 2017
256 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM A370: 2018
257 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ISO 6507_1: 2018
258 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test IS 1501 (Part 1): 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 29 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
259 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM E384: 2017
260 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM A370: 2018
261 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ISO 6507_1: 2018
262 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test IS 1501 (Part 1): 2013
263 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM E384: 2016
264 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM A370: 2018
265 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ISO 6507_1: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 30 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
266 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test IS 1501 (Part 1): 2013
267 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM E384: 2016
268 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM A370: 2018
269 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ISO 6507_1: 2018
270 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test IS 1501 (Part 1): 2013
271 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM E384: 2017
272 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ASTM A370: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 31 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
273 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Vickers Hardness Test ISO 6507_1: 2018
274 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress ASTM A370: 2018
275 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress ASTM E8: 2016
276 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress IS 1608 (Part I): 2018
277 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress EN ISO 6892: 2016
278 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress ASME Sec IX: 2017
279 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress EN 15614_1: 2012
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 32 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
280 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress API 1104: 2011
281 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress IS 3600 (Part 1): 2019
282 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallic Material Yield Stress EN 4136: 2013
283 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Metallica Material Ultimate Tensile Strength EN 15614_1: 2012
284 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Stainless Steel Determination of Inter metallicphase in Duplex austenitic / ferriticstainless steel - Method A & C
ASTM A923: 2014
285 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Stainless Steel Determination of Inter metallicphase in Duplex austenitic / ferriticstainless steel - Method B
ASTM A923: 2014
286 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Stainless Steel IGC Test - Practice A, Practice B,Practice C, Practice E
ASTM A262: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 33 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
287 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Stainless Steel IGC Test - Practice A, Practice B,Practice C, Practice E
DIN 3651-1 & 2: 1998
288 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Stainless Steel Pitting Corrosion Method A & B ASTM G48: 2011
289 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic Material Eddy Current Testing - FerrousTubes
ASME Sec V Article 17:2017
290 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic and NonFerromagnetic Material
Eddy Current Testing - Tube ASME Sec V Article 8:2017
291 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic Material Eddy Current for Ferrous Tubes ASME Sec V Article 17:2017
292 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic material MPT - Detection of surface flaws &subsurface flaws by both visible &fluorescent technique using yoke,prod and coil wrap method
ASME Sec V SE 709:2017
293 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Detection of Internal Flaws ASME Sec V, Article 4& 5: 2017
294 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Detection of Internal Flaws ASME SECV ART 23SA 578, SA 435: 2017
295 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Detection of Internal Flaws ISO 4386 (Part 1):2012
296 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
LPT by Visible & FlorescentTechnique using solvent removaltechnique - for Detection of flawsopen to surface
ASME Sec V Article 6,Article 24 SE 165: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 34 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
297 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
LPT by Visible & FlorescentTechnique using solvent removaltechnique - for Detection of flawsopen to surface
ASME SEC V ART 24SE 165: 2017
298 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
LPT by Visible & FlorescentTechnique using solvent removaltechnique - for Detection of flawsopen to surface
ISO 4386 (Part 3):2002
299 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Ultrasonic Thickness Measurement ASTM E797: 2015
300 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Ultrasonic Thickness Measurement ASTM E797: 2015
301 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Ultrasonic Thickness Measurement ASTM E797: 2015
302 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Visual Examination - Direct andRemote
ASME Sec V Article 9:2017
303 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous Metals & its Alloys Detection of Internal Flaws ASME SEC V ART 23SA 609: 2017
304 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous Metals & its Alloys -Forgings
Detection of Internal Flaws SA 388: 2017
305 NON-DESTRUCTIVE-METALS & ALLOYS
Non Ferromagnetic Material Eddy Current Testing for FerrousTubes
ASME Sec v Art 8:2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 35 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
Site Facility
1 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Chromium ASTM E1476: 2014
2 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Cobalt ASTM E1476: 2014
3 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Copper ASTM E1476: 2014
4 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Iron ASTM E1476: 2014
5 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Lead ASTM E1476: 2014
6 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Manganese ASTM E1476: 2014
7 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Molybdenum ASTM E1476: 2014
8 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Nickel ASTM E1476: 2014
9 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Niobium ASTM E1476: 2014
10 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Tin ASTM E1476: 2014
11 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Titanium ASTM E1476: 2014
12 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Tungsten ASTM E1476: 2014
13 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Vanadium ASTM E1476: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 36 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
14 CHEMICAL- METALS& ALLOYS
Metallic material by portable XRFbased machine
Zinc ASTM E1476: 2014
15 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous material Surface Roughness Measurement ASME B46.1: 2009
16 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous materials Ferrite Measurement byFerritoscope
ASTM A799/A799M:2015
17 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic Material Eddy Current Testing - FerrousTubes
ASME Sec V Article 17:2017
18 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic and NonFerromagnetic Material
Eddy Current Testing - Tube ASME Sec V Article 8:2017
19 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic Material Eddy Current for Ferrous Tubes ASME Sec V Article 17:2017
20 NON-DESTRUCTIVE-METALS & ALLOYS
Ferromagnetic material MPT - Detection of surface flaws &subsurface flaws by both visible &fluorescent technique using yoke,prod and coil wrap method
ASME Sec V SE 709:2017
21 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Detection of Internal Flaws ASME Sec V, Article 4& 5: 2017
22 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Detection of Internal Flaws ASME SECV ART 23SA 578, SA 435: 2017
23 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Detection of Internal Flaws ISO 4386 (Part 1):2012
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 37 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
24 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
LPT by Visible & FlorescentTechnique using solvent removaltechnique - for Detection of flawsopen to surface
ASME Sec V Article 6,Article 24 SE 165: 2017
25 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
LPT by Visible & FlorescentTechnique using solvent removaltechnique - for Detection of flawsopen to surface
ASME SEC V ART 24SE 165: 2017
26 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
LPT by Visible & FlorescentTechnique using solvent removaltechnique - for Detection of flawsopen to surface
ISO 4386 (Part 3):2002
27 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Ultrasonic Thickness Measurement ASTM E797: 2015
28 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Ultrasonic Thickness Measurement ASTM E797: 2015
29 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Ultrasonic Thickness Measurement ASTM E797: 2015
30 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous & Non Ferrous Metals & itsAlloys
Visual Examination - Direct andRemote
ASME Sec V Article 9:2017
31 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous Metals & its Alloys Detection of Internal Flaws ASME SEC V ART 23SA 609: 2017
32 NON-DESTRUCTIVE-METALS & ALLOYS
Ferrous Metals & its Alloys -Forgings
Detection of Internal Flaws SA 388: 2017
33 NON-DESTRUCTIVE-METALS & ALLOYS
Non Ferromagnetic Material Eddy Current Testing for FerrousTubes
ASME Sec v Art 8:2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name TCR ADVANCED ENGINEERING PRIVATE LIMITED, 250-252/9, GIDC,MAKARPURA, VADODARA, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6739 Page No. : 38 / 38
Validity 14/10/2019 to 13/10/2021 Last Amended on -