laboratory name metalab enterprise, 25-26, nilkanth …...ring road, odhav, ahmedabad, gujarat ,...
TRANSCRIPT
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
Permanent Facility
1 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Adhesion Test/ Pull Off Test ASTM D4541: 2017
2 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Bend Test(Conical Mandrel only) ASTM D522: 2017
3 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Bend Test(Conical Mandrel only) ISO 6860 : 2006
4 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Coating Thickness IS 3203:1982 RA: 2016
5 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Coating Thickness ASTM B 499-09: 2014
6 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Drop Impact ASTM D2794-93: 2010
7 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating M.E.K. Test ASTM D4752-10: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 1 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
8 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Mass of Zinc Coating IS: 6745:1972 RA:2016
9 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Mass of Zinc Coating ASTM A 90: 2013
10 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Mass of Zinc Coating BS EN ISO 1461: 2009
11 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Pencil Hardness ASTM D3363-05 e2:2011
12 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Salt Spray Test ASTM B117: 2016
13 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Uniformity of Zn Coating Test IS 2633:1986 RA: 2016
14 CHEMICAL- METALS& ALLOYS
Cast Iron Boron ASTM E 2209: 2013
15 CHEMICAL- METALS& ALLOYS
Cast Iron Cobalt ASTM E 2209: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 2 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
16 CHEMICAL- METALS& ALLOYS
Cast Iron Copper ASTM E 2209: 2013
17 CHEMICAL- METALS& ALLOYS
Nickel Alloys Carbon W/OPN/01 Issue no.:04: 2018
18 CHEMICAL- METALS& ALLOYS
Nickel Alloys Iron W/OPN/01 Issue no.:04: 2018
19 CHEMICAL- METALS& ALLOYS
Nickel Alloys Manganese W/OPN/01 Issue no.:04: 2018
20 CHEMICAL- METALS& ALLOYS
Nickel Alloys Phosphorus W/OPN/01 Issue no.:04: 2018
21 CHEMICAL- METALS& ALLOYS
Nickel Alloys Silicon W/OPN/01 Issue no.:04: 2018
22 CHEMICAL- METALS& ALLOYS
Nickel Alloys Sulphur W/OPN/01 Issue no.:04: 2018
23 CHEMICAL- METALS& ALLOYS
Nickel Alloys Vanadium W/OPN/01 Issue no.:04: 2018
24 CHEMICAL- METALS& ALLOYS
Stainless Steel Silicon IS 9879:1998 RA: 2015
25 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Cadmium ASTM E1251a: 2017
26 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Chromium ASTM E1251a: 2017
27 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Cobalt ASTM E1251a: 2017
28 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Copper ASTM E1251a: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 3 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
29 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Iron ASTM E1251a: 2017
30 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Lead ASTM E1251a: 2017
31 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Magnesium ASTM E1251a: 2017
32 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Manganese ASTM E1251a: 2017
33 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Nickel ASTM E1251a: 2017
34 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Silicon ASTM E1251a: 2017
35 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Tin ASTM E1251a: 2017
36 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Titanium ASTM E1251a: 2017
37 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Vanadium ASTM E1251a: 2017
38 CHEMICAL- METALS& ALLOYS
Aluminum & Aluminum Alloy Zinc ASTM E1251a: 2017
39 CHEMICAL- METALS& ALLOYS
Cast Iron Aluminium IS 8811:1998 Ra: 2018
40 CHEMICAL- METALS& ALLOYS
Cast Iron Aluminium ASTM E 415: 2017
41 CHEMICAL- METALS& ALLOYS
Cast Iron Aluminium ASTM E 2209: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 4 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
42 CHEMICAL- METALS& ALLOYS
Cast Iron Aluminium W/OPN/01 Issue no.:04: 2018
43 CHEMICAL- METALS& ALLOYS
Cast Iron Boron IS 8811:1998 Ra: 2018
44 CHEMICAL- METALS& ALLOYS
Cast Iron Boron ASTM E 415: 2017
45 CHEMICAL- METALS& ALLOYS
Cast Iron Boron W/OPN/01 Issue no.:04: 2018
46 CHEMICAL- METALS& ALLOYS
Cast Iron Carbon IS 8811:1998 Ra: 2018
47 CHEMICAL- METALS& ALLOYS
Cast Iron Carbon ASTM E 415: 2017
48 CHEMICAL- METALS& ALLOYS
Cast Iron Carbon ASTM E 2209 : 2013
49 CHEMICAL- METALS& ALLOYS
Cast Iron Carbon W/OPN/01, Issueno.:03: 2016
50 CHEMICAL- METALS& ALLOYS
Cast Iron Chromium IS 8811 : 1998 Ra:2018
51 CHEMICAL- METALS& ALLOYS
Cast Iron Chromium ASTM E 415: 2017
52 CHEMICAL- METALS& ALLOYS
Cast Iron Chromium ASTM E 2209: 2013
53 CHEMICAL- METALS& ALLOYS
Cast Iron Chromium W/OPN/01 Issue no.:04: 2018
54 CHEMICAL- METALS& ALLOYS
Cast Iron Cobalt IS 8811:1998 Ra: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 5 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
55 CHEMICAL- METALS& ALLOYS
Cast Iron Cobalt ASTM E 415: 2017
56 CHEMICAL- METALS& ALLOYS
Cast Iron Cobalt W/OPN/01 Issue no.:04: 2018
57 CHEMICAL- METALS& ALLOYS
Cast Iron Copper ASTM E 415: 2017
58 CHEMICAL- METALS& ALLOYS
Cast Iron Copper W/OPN/01 Issue no.:04: 2018
59 CHEMICAL- METALS& ALLOYS
Cast Iron Copper IS 8811:1998 Ra: 2018
60 CHEMICAL- METALS& ALLOYS
Cast Iron Manganese IS 8811:1998 Ra: 2018
61 CHEMICAL- METALS& ALLOYS
Cast Iron Manganese ASTM E 415: 2017
62 CHEMICAL- METALS& ALLOYS
Cast Iron Manganese ASTM E 2209: 2013
63 CHEMICAL- METALS& ALLOYS
Cast Iron Manganese W/OPN/01 Issue no.:04: 2018
64 CHEMICAL- METALS& ALLOYS
Cast Iron Molybdenum IS 8811 : 1998 Ra:2018
65 CHEMICAL- METALS& ALLOYS
Cast Iron Molybdenum ASTM E 415: 2017
66 CHEMICAL- METALS& ALLOYS
Cast Iron Molybdenum ASTM E 2209: 2013
67 CHEMICAL- METALS& ALLOYS
Cast Iron Molybdenum W/OPN/01 Issue no.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 6 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
68 CHEMICAL- METALS& ALLOYS
Cast Iron Nickel IS 8811 : 1998 Ra:2018
69 CHEMICAL- METALS& ALLOYS
Cast Iron Nickel ASTM E 415: 2017
70 CHEMICAL- METALS& ALLOYS
Cast Iron Nickel ASTM E 2209: 2013
71 CHEMICAL- METALS& ALLOYS
Cast Iron Nickel W/OPN/01 Issue no.:04: 2018
72 CHEMICAL- METALS& ALLOYS
Cast Iron Niobium IS 8811:1998 Ra: 2018
73 CHEMICAL- METALS& ALLOYS
Cast Iron Niobium ASTM E 415: 2017
74 CHEMICAL- METALS& ALLOYS
Cast Iron Niobium W/OPN/01 Issue no.:04: 2018
75 CHEMICAL- METALS& ALLOYS
Cast Iron Niobium ASTM E 2209: 2013
76 CHEMICAL- METALS& ALLOYS
Cast Iron Phosphorous IS 8811 : 1998 Ra:2018
77 CHEMICAL- METALS& ALLOYS
Cast Iron Phosphorous ASTM E 415: 2017
78 CHEMICAL- METALS& ALLOYS
Cast Iron Phosphorous ASTM E 2209: 2013
79 CHEMICAL- METALS& ALLOYS
Cast Iron Phosphorous W/OPN/01 Issue no.:04: 2018
80 CHEMICAL- METALS& ALLOYS
Cast Iron Silicon IS 8811 : 1998 Ra:2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 7 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
81 CHEMICAL- METALS& ALLOYS
Cast Iron Silicon ASTM E 415: 2017
82 CHEMICAL- METALS& ALLOYS
Cast Iron Silicon ASTM E 2209: 2013
83 CHEMICAL- METALS& ALLOYS
Cast Iron Silicon W/OPN/01, Issue no. 3:2016
84 CHEMICAL- METALS& ALLOYS
Cast Iron Sulphur IS 8811:1998 Ra: 2018
85 CHEMICAL- METALS& ALLOYS
Cast Iron Sulphur ASTM E 415: 2017
86 CHEMICAL- METALS& ALLOYS
Cast Iron Sulphur W/OPN/01 Issue no.:04: 2018
87 CHEMICAL- METALS& ALLOYS
Cast Iron Sulphur ASTM E 2209: 2013
88 CHEMICAL- METALS& ALLOYS
Cast Iron Titanium ASTM E 2209: 2013
89 CHEMICAL- METALS& ALLOYS
Cast Iron Titanium IS 8811:1998 Ra: 2018
90 CHEMICAL- METALS& ALLOYS
Cast Iron Titanium ASTM E 415: 2017
91 CHEMICAL- METALS& ALLOYS
Cast Iron Titanium W/OPN/01 Issue no.:04: 2018
92 CHEMICAL- METALS& ALLOYS
Cast Iron Tungsten W/OPN/01 Issue no.:04: 2018
93 CHEMICAL- METALS& ALLOYS
Cast Iron Tungsten ASTM E 2209: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 8 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
94 CHEMICAL- METALS& ALLOYS
Cast Iron Tungsten ASTM E 415: 2017
95 CHEMICAL- METALS& ALLOYS
Cast Iron Tungsten IS 8811:1998 Ra: 2018
96 CHEMICAL- METALS& ALLOYS
Cast Iron Vanadium ASTM E 2209: 2013
97 CHEMICAL- METALS& ALLOYS
Cast Iron Vanadium IS 8811:1998 Ra: 2018
98 CHEMICAL- METALS& ALLOYS
Cast Iron Vanadium ASTM E 415: 2017
99 CHEMICAL- METALS& ALLOYS
Cast Iron Vanadium W/OPN/01 Issue no.:04: 2018
100 CHEMICAL- METALS& ALLOYS
Cast Iron Nitrogen IS 8811 : 1998 Ra:2018
101 CHEMICAL- METALS& ALLOYS
Cast Iron Nitrogen ASTM E 415: 2017
102 CHEMICAL- METALS& ALLOYS
Cast Iron Nitrogen ASTM E 2209: 2013
103 CHEMICAL- METALS& ALLOYS
Cast Iron Nitrogen W/OPN/01 Issue no.:04: 2018
104 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Iron W/OPN/01 Issue no.:04: 2018
105 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Lead W/OPN/01 Issue no.:04: 2018
106 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Manganese W/OPN/01 Issue no.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 9 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
107 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Nickel W/OPN/01 Issue no.:04: 2018
108 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Silicon W/OPN/01 Issue no.:04: 2018
109 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Tin W/OPN/01 Issue no.:04: 2018
110 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Aluminium W/OPN/01 Issue no.:04: 2018
111 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Antimony W/OPN/01 Issue no.:04: 2018
112 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Phosphorous W/OPN/01 Issue no.:04: 2018
113 CHEMICAL- METALS& ALLOYS
Copper / Copper (Cu) Base Zinc W/OPN/01 Issue no.:04: 2018
114 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Aluminium ASTM E 415: 2017
115 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Aluminium W/OPN/01 Issue no.:04: 2018
116 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Aluminium IS 8811:1998 Ra: 2018
117 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Boron IS 8811:1998 Ra: 2018
118 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Boron ASTM E 415: 2017
119 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Boron W/OPN/01 Issue no.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 10 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
120 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Carbon IS 8811:1998 Ra: 2018
121 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Carbon ASTM E 415: 2017
122 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Carbon W/OPN/01, Issueno.:03: 2016
123 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Chromium IS 8811 : 1998 Ra:2018
124 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Chromium ASTM E 415: 2017
125 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Chromium W/OPN/01 Issue no.:04: 2018
126 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Cobalt IS 8811:1998 Ra: 2018
127 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Cobalt ASTM E 415: 2017
128 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Cobalt W/OPN/01 Issue no.:04: 2018
129 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Copper IS 8811:1998 Ra: 2018
130 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Copper ASTM E 415: 2017
131 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Copper W/OPN/01 Issue no.:04: 2018
132 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Manganese IS 8811:1998 Ra: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 11 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
133 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Manganese ASTM E 415: 2017
134 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Manganese W/OPN/01 Issue no.:04: 2018
135 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Molybdenum IS 8811 : 1998 Ra:2018
136 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Molybdenum ASTM E 415: 2017
137 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Molybdenum W/OPN/01 Issue no.:04: 2018
138 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Nickel IS 8811 : 1998 Ra:2018
139 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Nickel ASTM E 415: 2017
140 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Nickel W/OPN/01 Issue no.:04: 2018
141 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Niobium IS 8811:1998 Ra: 2018
142 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Niobium ASTM E 415: 2017
143 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Niobium W/OPN/01 Issue no.:04: 2018
144 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Phosphorous IS 8811 : 1998 Ra:2018
145 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Phosphorous W/OPN/01 Issue no.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 12 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
146 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Phosphorous ASTM E 415: 2017:2017
147 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Silicon IS 8811 : 1998 Ra:2018
148 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Silicon ASTM E 415: 2017
149 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Silicon W/OPN/01, Issue no. 3:2016
150 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Sulphur ASTM E 415: 2017
151 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Sulphur W/OPN/01 Issue no.:04: 2018
152 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Sulphur IS 8811:1998 Ra: 2018
153 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Titanium IS 8811:1998 Ra: 2018
154 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Titanium ASTM E 415: 2017
155 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Titanium W/OPN/01 Issue no.:04: 2018
156 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Tungsten W/OPN/01 Issue no.:04: 2018
157 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Tungsten ASTM E 415: 2017
158 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Tungsten IS 8811:1998 Ra: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 13 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
159 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Vanadium ASTM E 415: 2017
160 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Vanadium W/OPN/01 Issue no.:04: 2018
161 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Vanadium IS 8811:1998 Ra: 2018
162 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Nitrogen IS 8811:1998 Ra: 2018
163 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Nitrogen ASTM E 415: 2017
164 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Nitrogen W/OPN/01 Issue no.:04: 2018
165 CHEMICAL- METALS& ALLOYS
Mn Steel Aluminium ASTM E 2209: 2013
166 CHEMICAL- METALS& ALLOYS
Mn Steel Aluminium W/OPN/01 Issue no.:04: 2018
167 CHEMICAL- METALS& ALLOYS
Mn Steel Boron ASTM E 2209: 2013
168 CHEMICAL- METALS& ALLOYS
Mn Steel Boron W/OPN/01 Issue no.:04: 2018
169 CHEMICAL- METALS& ALLOYS
Mn Steel Carbon ASTM E 2209: 2013
170 CHEMICAL- METALS& ALLOYS
Mn Steel Carbon W/OPN/01 Issue no.:04: 2018
171 CHEMICAL- METALS& ALLOYS
Mn Steel Chromium ASTM E 2209: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 14 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
172 CHEMICAL- METALS& ALLOYS
Mn Steel Chromium W/OPN/01 Issue no.:04: 2018
173 CHEMICAL- METALS& ALLOYS
Mn Steel Cobalt ASTM E 2209: 2013
174 CHEMICAL- METALS& ALLOYS
Mn Steel Cobalt W/OPN/01 Issue no.:04: 2018
175 CHEMICAL- METALS& ALLOYS
Mn Steel Copper ASTM E 2209: 2013
176 CHEMICAL- METALS& ALLOYS
Mn Steel Copper W/OPN/01 Issue no.:04: 2018
177 CHEMICAL- METALS& ALLOYS
Mn Steel Manganese ASTM E 2209: 2013
178 CHEMICAL- METALS& ALLOYS
Mn Steel Manganese W/OPN/01 Issue no.:04: 2018
179 CHEMICAL- METALS& ALLOYS
Mn Steel Molybdenum ASTM E 2209: 2013
180 CHEMICAL- METALS& ALLOYS
Mn Steel Molybdenum W/OPN/01 Issue no.:04: 2018
181 CHEMICAL- METALS& ALLOYS
Mn Steel Nickel ASTM E 2209: 2013
182 CHEMICAL- METALS& ALLOYS
Mn Steel Nickel W/OPN/01 Issue no.:04: 2018
183 CHEMICAL- METALS& ALLOYS
Mn Steel Niobium ASTM E 2209: 2013
184 CHEMICAL- METALS& ALLOYS
Mn Steel Niobium W/OPN/01 Issue no.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 15 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
185 CHEMICAL- METALS& ALLOYS
Mn Steel Nitrogen ASTM E 2209: 2013
186 CHEMICAL- METALS& ALLOYS
Mn Steel Phosphorous ASTM E 2209: 2013
187 CHEMICAL- METALS& ALLOYS
Mn Steel Phosphorous W/OPN/01 Issue no.:04: 2018
188 CHEMICAL- METALS& ALLOYS
Mn Steel Silicon ASTM E 2209: 2013
189 CHEMICAL- METALS& ALLOYS
Mn Steel Silicon W/OPN/01 Issue no.:04: 2018
190 CHEMICAL- METALS& ALLOYS
Mn Steel Sulphur ASTM E 2209: 2013
191 CHEMICAL- METALS& ALLOYS
Mn Steel Sulphur W/OPN/01 Issue no.:04: 2018
192 CHEMICAL- METALS& ALLOYS
Mn Steel Titanium ASTM E 2209: 2013
193 CHEMICAL- METALS& ALLOYS
Mn Steel Titanium W/OPN/01 Issu no.: 04:2018
194 CHEMICAL- METALS& ALLOYS
Mn Steel Vanadium ASTM E 2209: 2013
195 CHEMICAL- METALS& ALLOYS
Mn Steel Vanadium W/OPN/01 Issue no.:04: 2018
196 CHEMICAL- METALS& ALLOYS
Mn Steel Nitrogen W/OPN/01 Issu no.: 04:2018
197 CHEMICAL- METALS& ALLOYS
Mn Steel Tungsten W/OPN/01 Issue no.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 16 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
198 CHEMICAL- METALS& ALLOYS
Mn Steel Tungsten ASTM E 2209: 2013
199 CHEMICAL- METALS& ALLOYS
Nickel Alloys Aluminium W/OPN/01 Issue no.:04: 2018
200 CHEMICAL- METALS& ALLOYS
Nickel Alloys Boron W/OPN/01 Issue no.:04: 2018
201 CHEMICAL- METALS& ALLOYS
Nickel Alloys Chromium W/OPN/01 Issue no.:04: 2018
202 CHEMICAL- METALS& ALLOYS
Nickel Alloys Cobalt W/OPN/01 Issue no.:04: 2018
203 CHEMICAL- METALS& ALLOYS
Nickel Alloys Copper W/OPN/01 Issue no.:04: 2018
204 CHEMICAL- METALS& ALLOYS
Nickel Alloys Molybdenum W/OPN/01 Issue no.:04: 2018
205 CHEMICAL- METALS& ALLOYS
Nickel Alloys Niobium W/OPN/01 Issue no.:04: 2018
206 CHEMICAL- METALS& ALLOYS
Nickel Alloys Titanium W/OPN/01 Issue no.:04: 2018
207 CHEMICAL- METALS& ALLOYS
Nickel Alloys Tungsten W/OPN/01 Issue no.:04: 2018
208 CHEMICAL- METALS& ALLOYS
Nickel Alloys Tantalum W/OPN/01 Issue no.:04: 2018
209 CHEMICAL- METALS& ALLOYS
Positive Material Identification Segregation of mix up Alloys(Fe,Cu, Al & Ni base alloys)
ASTM E 1916: 2011
210 CHEMICAL- METALS& ALLOYS
Positive Material Identification Segregation of mix up Alloys (Fe,Cu, Al & Ni base alloys)
W/OPN/12 IssueNo.02: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 17 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
211 CHEMICAL- METALS& ALLOYS
Stainless Steel Aluminium ASTM E1086: 2014
212 CHEMICAL- METALS& ALLOYS
Stainless Steel Aluminium IS 9879:1998 RA: 2015
213 CHEMICAL- METALS& ALLOYS
Stainless Steel Aluminium W/OPN/01 Issue no.:04: 2018
214 CHEMICAL- METALS& ALLOYS
Stainless Steel Boron ASTM E1086: 2014
215 CHEMICAL- METALS& ALLOYS
Stainless Steel Boron IS 9879:1998 RA: 2015
216 CHEMICAL- METALS& ALLOYS
Stainless Steel Boron W/OPN/01 Issue no.:04: 2018
217 CHEMICAL- METALS& ALLOYS
Stainless Steel Carbon IS 9879:1998 RA: 2015
218 CHEMICAL- METALS& ALLOYS
Stainless Steel Carbon ASTM E1086 : 2014
219 CHEMICAL- METALS& ALLOYS
Stainless Steel Carbon W/OPN/01 Issue no.:04: 2018
220 CHEMICAL- METALS& ALLOYS
Stainless Steel Chromium IS 9879 : 1998 RA:2015
221 CHEMICAL- METALS& ALLOYS
Stainless Steel Chromium ASTM E1086 : 2014
222 CHEMICAL- METALS& ALLOYS
Stainless Steel Chromium W/OPN/01 Issue no.:04: 2018
223 CHEMICAL- METALS& ALLOYS
Stainless Steel Cobalt IS 9879 : 1998: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 18 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
224 CHEMICAL- METALS& ALLOYS
Stainless Steel Cobalt ASTM E1086: 2014
225 CHEMICAL- METALS& ALLOYS
Stainless Steel Cobalt W/OPN/01 Issue no.:04: 2018
226 CHEMICAL- METALS& ALLOYS
Stainless Steel Copper IS 9879 : 1998 RA:2015
227 CHEMICAL- METALS& ALLOYS
Stainless Steel Copper ASTM E1086 : 2014
228 CHEMICAL- METALS& ALLOYS
Stainless Steel Copper W/OPN/01 Issue no.:04: 2018
229 CHEMICAL- METALS& ALLOYS
Stainless Steel Manganese IS 9879:1998 RA: 2015
230 CHEMICAL- METALS& ALLOYS
Stainless Steel Manganese ASTM E1086 : 2014
231 CHEMICAL- METALS& ALLOYS
Stainless Steel Manganese W/OPN/01 Issue no.:04: 2018
232 CHEMICAL- METALS& ALLOYS
Stainless Steel Molybdenum IS 9879 : 1998 RA:2015
233 CHEMICAL- METALS& ALLOYS
Stainless Steel Molybdenum ASTM E1086 : 2014
234 CHEMICAL- METALS& ALLOYS
Stainless Steel Molybdenum W/OPN/01 Issue no.:04: 2018
235 CHEMICAL- METALS& ALLOYS
Stainless Steel Nickel IS 9879 : 1998 RA:2015
236 CHEMICAL- METALS& ALLOYS
Stainless Steel Nickel ASTM E1086 : 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 19 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
237 CHEMICAL- METALS& ALLOYS
Stainless Steel Nickel W/OPN/01 Issue no.:04: 2018
238 CHEMICAL- METALS& ALLOYS
Stainless Steel Niobium W/OPN/01 Issue no.:04: 2018
239 CHEMICAL- METALS& ALLOYS
Stainless Steel Niobium IS 9879 : 1998 RA:2015
240 CHEMICAL- METALS& ALLOYS
Stainless Steel Niobium ASTM E1086: 2014
241 CHEMICAL- METALS& ALLOYS
Stainless Steel Nitrogen IS 9879 : 1998 RA:2015
242 CHEMICAL- METALS& ALLOYS
Stainless Steel Nitrogen ASTM E1086: 2014
243 CHEMICAL- METALS& ALLOYS
Stainless Steel Nitrogen W/OPN/01 Issue no.:04: 2018
244 CHEMICAL- METALS& ALLOYS
Stainless Steel Phosphorous IS 9879 : 1998 RA:2015
245 CHEMICAL- METALS& ALLOYS
Stainless Steel Phosphorous ASTM E1086 : 2014
246 CHEMICAL- METALS& ALLOYS
Stainless Steel Phosphorous W/OPN/01 Issue no.:04: 2018
247 CHEMICAL- METALS& ALLOYS
Stainless Steel Silicon ASTM E1086 : 2014
248 CHEMICAL- METALS& ALLOYS
Stainless Steel Silicon W/OPN/01 Issue no.:04: 2018
249 CHEMICAL- METALS& ALLOYS
Stainless Steel Sulphur IS 9879:1998 RA: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 20 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
250 CHEMICAL- METALS& ALLOYS
Stainless Steel Sulphur ASTM E1086 : 2014
251 CHEMICAL- METALS& ALLOYS
Stainless Steel Sulphur W/OPN/01 Issue no.:04: 2018
252 CHEMICAL- METALS& ALLOYS
Stainless Steel Titanium W/OPN/01 Issue no.:04: 2018
253 CHEMICAL- METALS& ALLOYS
Stainless Steel Titanium ASTM E1086: 2014
254 CHEMICAL- METALS& ALLOYS
Stainless Steel Titanium IS 9879:1998 RA: 2015
255 CHEMICAL- METALS& ALLOYS
Stainless Steel Tungsten IS 9879:1998 RA: 2015
256 CHEMICAL- METALS& ALLOYS
Stainless Steel Tungsten ASTM E1086: 2014
257 CHEMICAL- METALS& ALLOYS
Stainless Steel Tungsten W/OPN/01 Issue no.:04: 2018
258 CHEMICAL- METALS& ALLOYS
Stainless Steel Vanadium IS 9879:1998 RA: 2015
259 CHEMICAL- METALS& ALLOYS
Stainless Steel Vanadium ASTM E1086: 2014
260 CHEMICAL- METALS& ALLOYS
Stainless Steel Vanadium W/OPN/01 Issue no.:04: 2018
261 CHEMICAL- METALS& ALLOYS
Tool Steel Aluminium ASTM E 2209 : 2013
262 CHEMICAL- METALS& ALLOYS
Tool Steel Aluminium W/OPN/01 Issueno.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 21 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
263 CHEMICAL- METALS& ALLOYS
Tool Steel Aluminium IS 8811 : 1998 Ra:2018
264 CHEMICAL- METALS& ALLOYS
Tool Steel Aluminium ASTM E 415: 2017
265 CHEMICAL- METALS& ALLOYS
Tool Steel Boron IS 8811:1998 Ra: 2018
266 CHEMICAL- METALS& ALLOYS
Tool Steel Boron ASTM E 415: 2017
267 CHEMICAL- METALS& ALLOYS
Tool Steel Boron W/OPN/01, Issue no.:04: 2018
268 CHEMICAL- METALS& ALLOYS
Tool Steel Boron ASTM E 2209: 2013
269 CHEMICAL- METALS& ALLOYS
Tool Steel Carbon W/OPN/01 Issueno.:04: 2018
270 CHEMICAL- METALS& ALLOYS
Tool Steel Carbon IS 8811 : 1998 Ra:2018
271 CHEMICAL- METALS& ALLOYS
Tool Steel Carbon ASTM E 415 : 2017
272 CHEMICAL- METALS& ALLOYS
Tool Steel Carbon ASTM E 2209: 2013
273 CHEMICAL- METALS& ALLOYS
Tool Steel Chromium IS 8811 : 1998 Ra:2018
274 CHEMICAL- METALS& ALLOYS
Tool Steel Chromium ASTM E 415: 2017
275 CHEMICAL- METALS& ALLOYS
Tool Steel Chromium W/OPN/01 Issueno.:04: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 22 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
276 CHEMICAL- METALS& ALLOYS
Tool Steel Cobalt ASTM E 2209: 2013
277 CHEMICAL- METALS& ALLOYS
Tool Steel Cobalt IS 8811 : 1998 Ra:2018
278 CHEMICAL- METALS& ALLOYS
Tool Steel Cobalt ASTM E 415: 2017
279 CHEMICAL- METALS& ALLOYS
Tool Steel Cobalt W/OPN/01, Issueno.:04: 2018
280 CHEMICAL- METALS& ALLOYS
Tool Steel Copper ASTM E 2209: 2013
281 CHEMICAL- METALS& ALLOYS
Tool Steel Copper IS 8811 : 1998 Ra:2018
282 CHEMICAL- METALS& ALLOYS
Tool Steel Copper ASTM E 415: 2017
283 CHEMICAL- METALS& ALLOYS
Tool Steel Copper W/OPN/01 Issueno.:04: 2018
284 CHEMICAL- METALS& ALLOYS
Tool Steel Manganese IS 8811 : 1998 Ra :2018
285 CHEMICAL- METALS& ALLOYS
Tool Steel Manganese ASTM E 415: 2017
286 CHEMICAL- METALS& ALLOYS
Tool Steel Manganese ASTM E 2209: 2013
287 CHEMICAL- METALS& ALLOYS
Tool Steel Manganese W/OPN/01 Issueno.:04: 2018
288 CHEMICAL- METALS& ALLOYS
Tool Steel Molybdenum IS 8811 : 1998 Ra:2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 23 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
289 CHEMICAL- METALS& ALLOYS
Tool Steel Molybdenum ASTM E 415: 2017
290 CHEMICAL- METALS& ALLOYS
Tool Steel Molybdenum ASTM E 2209: 2013
291 CHEMICAL- METALS& ALLOYS
Tool Steel Molybdenum W/OPN/01 Issueno.:04: 2018
292 CHEMICAL- METALS& ALLOYS
Tool Steel Nickel IS 8811 : 1998 Ra:2018
293 CHEMICAL- METALS& ALLOYS
Tool Steel Nickel ASTM E 415: 2017
294 CHEMICAL- METALS& ALLOYS
Tool Steel Nickel ASTM E 2209 : 2013
295 CHEMICAL- METALS& ALLOYS
Tool Steel Nickel W/OPN/01 Issueno.:04: 2018
296 CHEMICAL- METALS& ALLOYS
Tool Steel Niobium ASTM E 2209: 2013
297 CHEMICAL- METALS& ALLOYS
Tool Steel Niobium IS 8811 : 1998 Ra:2018
298 CHEMICAL- METALS& ALLOYS
Tool Steel Niobium ASTM E 415: 2017
299 CHEMICAL- METALS& ALLOYS
Tool Steel Niobium W/OPN/01, Issueno.:04: 2018
300 CHEMICAL- METALS& ALLOYS
Tool Steel Phosphorous IS 8811 : 1998 Ra:2018
301 CHEMICAL- METALS& ALLOYS
Tool Steel Phosphorous ASTM E 415: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 24 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
302 CHEMICAL- METALS& ALLOYS
Tool Steel Phosphorous ASTM E 2209: 2013
303 CHEMICAL- METALS& ALLOYS
Tool Steel Phosphorous W/OPN/01 Issueno.:04: 2018
304 CHEMICAL- METALS& ALLOYS
Tool Steel Silicon IS 8811 : 1998 Ra:2018
305 CHEMICAL- METALS& ALLOYS
Tool Steel Silicon ASTM E 415: 2017
306 CHEMICAL- METALS& ALLOYS
Tool Steel Silicon ASTM E 2209: 2013
307 CHEMICAL- METALS& ALLOYS
Tool Steel Silicon W/OPN/01 Issueno.:04: 2018
308 CHEMICAL- METALS& ALLOYS
Tool Steel Sulphur IS 8811 : 1998 Ra:2018
309 CHEMICAL- METALS& ALLOYS
Tool Steel Sulphur ASTM E 415: 2017
310 CHEMICAL- METALS& ALLOYS
Tool Steel Sulphur W/OPN/01 Issueno.:04: 2018
311 CHEMICAL- METALS& ALLOYS
Tool Steel Sulphur ASTM E 2209: 2013
312 CHEMICAL- METALS& ALLOYS
Tool Steel Titanium ASTM E 2209: 2013
313 CHEMICAL- METALS& ALLOYS
Tool Steel Titanium IS 8811 : 1998 Ra:2018
314 CHEMICAL- METALS& ALLOYS
Tool Steel Titanium ASTM E 415 : 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 25 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
315 CHEMICAL- METALS& ALLOYS
Tool Steel Titanium W/OPN/01 Issueno.:04: 2018
316 CHEMICAL- METALS& ALLOYS
Tool Steel Tungsten IS 8811 : 1998 Ra:2018
317 CHEMICAL- METALS& ALLOYS
Tool Steel Tungsten ASTM E 2209: 2013
318 CHEMICAL- METALS& ALLOYS
Tool Steel Tungsten ASTM E 415: 2017
319 CHEMICAL- METALS& ALLOYS
Tool Steel Tungsten W/OPN/01, Issueno.:04: 2018
320 CHEMICAL- METALS& ALLOYS
Tool Steel Vanadium ASTM E 2209: 2013
321 CHEMICAL- METALS& ALLOYS
Tool Steel Vanadium IS 8811:1998 Ra: 2018
322 CHEMICAL- METALS& ALLOYS
Tool Steel Vanadium ASTM E 415: 2017
323 CHEMICAL- METALS& ALLOYS
Tool Steel Vanadium W/OPN/01, Issueno.:04: 2018
324 CHEMICAL- METALS& ALLOYS
Tool Steel Chromium ASTM E 2209: 2013
325 CHEMICAL- METALS& ALLOYS
Tool steel Nitrogen ASTM E 2209: 2013
326 CHEMICAL- METALS& ALLOYS
Tool Steel Nitrogen W/OPN/01 Issueno.:04: 2018
327 CHEMICAL- METALS& ALLOYS
Tool Steel Nitrogen IS 8811 : 1998 Ra:2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 26 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
328 CHEMICAL- METALS& ALLOYS
Tool Steel Nitrogen ASTM E 415: 2017
329 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Abrasion value (by Los angeles) IS 2386 (Part–4) : 1963RA : 2016
330 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Bulk Density IS 2386 (Part–3) : 1963RA : 2016
331 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Sieve analysis / gradation (SieveSize: 80 mm,63 mm,50 mm,40mm,31.5mm,25 mm,20 mm,16mm,12.5 mm,10 mm,6.3 mm,4.75mm)
IS 2386 (Part–1) : 1963RA: 2016
332 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Water absorption IS 2386 (Part–3) : 1963RA: 2016
333 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Bulk Density IS 2386 (Part–3) : 1963RA : 2016
334 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Specific gravity IS 2386 (Part–3) : 1963RA : 2016
335 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Water absorption IS 2386 (Part–3) : 1963RA: 2016
336 MECHANICAL-BUILDINGSMATERIALS
AAC Block Compressive Strength IS 6441 (Part 5) : 1972Ra: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 27 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
337 MECHANICAL-BUILDINGSMATERIALS
AAC Block Dimension - H IS 2185 (Part 3) :1984RA : 2015
338 MECHANICAL-BUILDINGSMATERIALS
AAC Block Dimension - L IS 2185 (Part 3) :1984RA: 2015
339 MECHANICAL-BUILDINGSMATERIALS
AAC Block Dimension - W IS 2185 (Part 3) 1984RA: 2015
340 MECHANICAL-BUILDINGSMATERIALS
AAC Block Dry Density IS 6441 (Part 1) : 1972RA : 2017
341 MECHANICAL-BUILDINGSMATERIALS
AAC Block Moisture Content IS 6441 (Part 1) : 1972RA: 2017
342 MECHANICAL-BUILDINGSMATERIALS
Bricks Compressive strength IS 3495 (Part–1) :1992: 2016
343 MECHANICAL-BUILDINGSMATERIALS
Bricks Dimensions - H IS 1077 : 1992 RA:2016
344 MECHANICAL-BUILDINGSMATERIALS
Bricks Dimensions - L IS 1077 : 1992 RA:2016
345 MECHANICAL-BUILDINGSMATERIALS
Bricks Dimensions - W IS 1077 : 1992 RA:2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 28 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
346 MECHANICAL-BUILDINGSMATERIALS
Bricks Efflorescence IS 3495 (Part–3) :1992: 2016
347 MECHANICAL-BUILDINGSMATERIALS
Bricks Water absorption IS 3495 (Part–2) :1992: 2016
348 MECHANICAL-BUILDINGSMATERIALS
Cement Compressive strength IS 4031 (Part–6) : 1988RA: 2014
349 MECHANICAL-BUILDINGSMATERIALS
Cement Consistency IS 4031 (Part–4): 1988RA: 2016
350 MECHANICAL-BUILDINGSMATERIALS
Cement Final setting time IS 4031 (Part–5) : 1988RA : 2016
351 MECHANICAL-BUILDINGSMATERIALS
Cement Fineness by blaine air permeability IS 4031 (Part–2) : 1999RA: 2013
352 MECHANICAL-BUILDINGSMATERIALS
Cement Fineness by dry sieving IS 4031: 1996,Part–1,Clause No.5 : 2016
353 MECHANICAL-BUILDINGSMATERIALS
Cement Initial setting time IS 4031 (Part–5) : 1988RA: 2016
354 MECHANICAL-BUILDINGSMATERIALS
Cement Soundness by Le–chatelier’smethods
IS 4031 (Part–3) :1988: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 29 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
355 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Crushing value IS 2386 (Part–4) : 1963RA: 2016
356 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Elongation index IS 2386 (Part–1): 1963RA: 2016
357 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Flakiness index IS 2386 (Part–1) 1963RA: 2016
358 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Impact value IS 2386 (Part–4) : 1963RA: 2016
359 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Specific gravity IS 2386 (Part–3) : 1963RA: 2016
360 MECHANICAL-BUILDINGSMATERIALS
Concrete Compressive strength IS 516 : 1959: 2013
361 MECHANICAL-BUILDINGSMATERIALS
Concrete Flexural Strength of Beam IS 516 : 1959: 2013
362 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Fineness modulus by gradation IS 2386 (Part–1) : 1963RA: 2016
363 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 30 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
364 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1: 2016
365 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
366 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
367 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
368 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586,Part-1: 2018
369 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586,Part-1: 2018
370 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 31 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
371 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
372 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
373 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586, Part–1: 2018
374 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586, Part–1: 2018
375 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
376 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
377 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1 :: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 32 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
378 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586 Part–1: 2018
379 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
380 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1: 2016
381 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ASTM E384: 2017
382 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ASTM E384: 2017
383 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501,Part-1:2013Ra: 2018
384 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501,Part-1:2013Ra: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 33 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
385 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1: 2018
386 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1: 2018
387 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501 Part-1:2013Ra: 2018
388 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501 Part-1:2013Ra: 2018
389 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ASTM E384: 2017
390 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ASTM E384: 2017
391 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 34 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
392 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1: 2018
393 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Fillet Weld Joints, Ferrous & NonFerrous Product
Fracture Test IS 3600 Part-8Ra.1985: 2019
394 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Fillet Weld Joints, Ferrous & NonFerrous Product
Fracture Test IS 7310 Part-1:1974Ra: 2011
395 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Fillet Weld Joints, Ferrous & NonFerrous Product
Fracture Test AWS D1.1: 2015
396 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Fillet Weld Joints, Ferrous & NonFerrous Product
Fracture Test API 1104: 2016
397 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Tensile Breaking Load)
IS 1608 Part-1: 2018
398 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test ASTM E384: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 35 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
399 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test ASTM E384: 2017
400 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test EN ISO 15614-1: 2017
401 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test EN ISO 15614-1: 2017
402 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test BS EN ISO 9015-1:2011
403 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test BS EN ISO 9015-1:2011
404 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation IS 1608 Part-1: 2018
405 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation ASTM A 370: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 36 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
406 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation ISO 6892(P1) : 2016
407 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation ASTM B 557: 2015
408 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation IS 16172: 2014
409 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation IS 1608 Part-1: 2018
410 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation ASTM A 370: 2017
411 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation ISO 6892(P1): 2016
412 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation ASTM B 557: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 37 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
413 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product % Elongation IS 16172: 2014
414 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Bend Test IS 1599:2012 RA :2015
415 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Bend Test IS 1786:2008 RA: 2013
416 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Bend Test ASTM A 370: 2017
417 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Bend Test IS 1599:2012 RA: 2015
418 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Bend Test IS 1786:2008 RA: 2013
419 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Bend Test ASTM A 370: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 38 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
420 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 1608 Part-1: 2018
421 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM A 370: 2017
422 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ISO 6892(P1): 2016
423 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM B 557: 2015
424 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 16172: 2014
425 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 1608 Part-1: 2018
426 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM A 370 : 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 39 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
427 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ISO 6892(P1): 2016
428 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM B 557: 2015
429 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 16172: 2014
430 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % IS 1608 Part-1: 2018
431 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % ASTM A 370: 2017
432 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % ISO 6892(P1): 2016
433 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % ASTM B 557: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 40 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
434 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % IS 16172: 2014
435 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % IS 1608 Part-1: 2018
436 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % ASTM A 370: 2017
437 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % ISO 6892(P1): 2016
438 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % ASTM B 557: 2015
439 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Reduction Area % IS 16172: 2014
440 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 41 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
441 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586,Part-1: 2018
442 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586, Part–1: 2018
443 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
444 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1 : 2016
445 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
446 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1: 2016
447 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 42 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
448 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
449 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586 Part–1: 2018
450 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017
451 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1 : 2016
452 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
453 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019
454 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Steel Tube – Flattening Test IS 2328: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 43 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
455 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Steel Tube – Flattening Test ASTM A 370: 2017
456 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Steel Tube – Flattening Test IS 2328: 2018
457 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Steel Tube – Flattening Test ASTM A 370: 2017
458 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strenght IS 16172: 2014
459 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength IS 1608 Part-1: 2018
460 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM A370: 2017
461 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength ISO 6892 Part 1: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 44 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
462 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM B557: 2015
463 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength IS 1608 Part-1: 2018
464 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM A 370: 2017
465 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength ISO 6892(P1): 2016
466 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM B 557: 2015
467 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Ultimate Tensile Strength IS 16172: 2014
468 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501 Part-1:2013Ra: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 45 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
469 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ASTM E384: 2017
470 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1 : 2018
471 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501 Part-1:2013Ra: 2018
472 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ASTM E384: 2017
473 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1 : 2018
474 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress IS 1608 Part-1: 2018
475 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress ISO 6892 PART 1:2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 46 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
476 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress ASTM B557: 2015
477 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress IS 16172: 2014
478 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress IS 1608 Part-1: 2018
479 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress ASTM A 370: 2017
480 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress ISO 6892(P1): 2016
481 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress ASTM B 557: 2015
482 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress IS 16172: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 47 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
483 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Product Yield Stress/0.2% proof stress ASTM A370: 2017
484 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous Product Through Thickness Test RA ASTM A770-03 e1:2012
485 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous Product Through Thickness Test RA BS EN 10164: 2018
486 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Fillet Weld Joints, Ferrous & NonFerrous Product
Fracture Test ASME Sec.IX: 2017
487 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Reinforced steel and Steel Section Weight/meter IS 808 : 1989 RA: 2014
488 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Reinforced steel and Steel Section Weight/meter IS 1786:2008 RA: 2013
489 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Chisel Test ISO 14273: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 48 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
490 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Chisel Test ISO 10447: 2015
491 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Chisel Test BS EN ISO 15614:2014
492 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Chisel Test ISO 14270: 2016
493 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Chisel Test ASME Section-IX: 2017
494 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650°C%Elongation
ASTM E21: 2017
495 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650°C%Elongation
ISO 6892(2): 2018
496 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650°CReduction Area %
ASTM E21: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 49 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
497 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650°CReduction Area %
ISO 6892(2): 2018
498 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650°CUltimate Tensile Strength
ASTM E21: 2017
499 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650°CUltimate Tensile Strength
ISO 6892(2): 2018
500 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650 °CYieldStress
ASTM E21: 2017
501 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Hot Tensile Test upto 650 °CYieldStress
ISO 6892(2): 2018
502 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Peel Test ASME Section-IX: 2017
503 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Peel Test ISO 14273: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 50 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
504 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Peel Test ISO 10447: 2015
505 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Peel Test BS EN ISO 15614:2014
506 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Peel Test ISO 14270: 2016
507 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Shear Test ASME Section-IX: 2017
508 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Shear Test ISO 14273: 2016
509 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Shear Test ISO 10447: 2015
510 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Shear Test BS EN ISO 15614:2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 51 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
511 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Shear Test ISO 14270: 2016
512 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Tube & Tube Sheet Joints (Shearloading)
ASME SEC-VII-Div1(Non mandatoryAppendices Sec A–3):2017
513 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel and Weld Product Charpy ”V” Notch Impact Test [Ambient to (-) 196°C ]
ISO 148-1: 2016
514 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel and Weld Product Charpy ”V” Notch Impact Test [Ambient to (-) 196°C ]
ASTM E 23: 2016
515 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel and Weld Product Charpy ”V” Notch Impact Test [Ambient to (-) 196°C ]
ASTM A 370: 2017
516 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel and Weld Product Charpy ”V” Notch Impact Test [Ambient to (-) 196°C ]
IS 1757, Part–1 : 2014
517 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners Nuts Size M4 to M39 (Proof loadtest)
ASTM A 370: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 52 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
518 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners Nuts Size M4 to M39 (Proof LoadTest)
IS 1367 (Part–6):1994RA : 2015
519 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Proof Load test)
IS:1367(Part-3): 2017
520 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Proof Load test)
ASTM A 370: 2017
521 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Proof load test)
ISO 3506-1: 2009
522 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Tensile Breaking Load)
ISO 3506-1: 2009
523 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Tensile Breaking Load)
IS:1367(Part-3): 2017
524 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Wedge Load test )
IS 1367 Part-1: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 53 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
525 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Wedge Load test )
ASTM A 370: 2017
526 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Wedge Load test )
ISO 3506-1: 2009
527 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 to M39(Wedge Load test)
IS:1367(Part-3),: 2017
528 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners STUDS / BOLTS Size M4 toM39(Tensile Breaking Load)
ASTM A 370: 2017
529 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Fastners Nuts M4 to M39 (Proof Load Test) ISO 3506-2: 2009
530 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel tubes / Sockets Flaring Test / Drift Expansion Test IS 2335 : 2005 RA:2017
531 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel tubes / Sockets Flaring Test / Drift Expansion Test EN ISO 8493: 2004
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 54 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
532 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel tubes / Sockets Flaring Test / Drift Expansion Test ASTM A 370: 2017
533 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel tubes / Sockets Flaring Test / Drift Expansion Test ASTM A 1016: 2018
534 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel tubes / Sockets Ring Tensile Test ISO 8496: 2013
535 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel wire For Prestressed Concrete 1 % Extension IS 14268: 2017
536 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel wire For Prestressed Concrete Breaking Load IS 14268 : 2017
537 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel wire For Prestressed Concrete Elongation IS 14268: 2017
538 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel wire For Prestressed Concrete Lay Length IS 14268: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 55 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
539 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel wire For Prestressed Concrete Modulus Elasticity IS 14268: 2017
540 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel wire For Prestressed Concrete Nominal Diameter IS 14268: 2017
541 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel wire For Prestressed Concrete Weight per Meter IS 14268: 2017
542 MECHANICAL-MECHANICALPROPERTIES OFMETALS
TMT Reinforced Steel bar Re–bend IS 1786 : 2008 RA:2013
543 MECHANICAL-MECHANICALPROPERTIES OFMETALS
TMT Reinforced Steel bar Re–bend IS 1599 : 2012 RA:2017
544 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Transverse and Longitudinal BendTest
ASME Sec.IX: 2017
545 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Transverse and Longitudinal BendTest
IS 3600 Part-5: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 56 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
546 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Transverse and Longitudinal BendTest
ISO 5173: 2009
547 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Transverse and Longitudinal BendTest
ISO 5173: 2009
548 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Transverse and Longitudinal BendTest
AWS D1.1: 2015
549 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Transverse and Longitudinal BendTest
API 1104 : 2016
550 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test ASTM E384: 2017
551 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test EN ISO 15614-1: 2017
552 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Coupon Plate andWeldments
Vickers Hardness Test ASTM E384, EN ISO15614-1, BS EN ISO9015-1 : 2011
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 57 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
553 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Nick Break test API 1104: 2016
554 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Nick Break test IS 3600(8):1985 RA:2019
555 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Transverse Tensile Strength API 1104: 2016
556 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Transverse Tensile Strength ASME Sec.IX: 2017
557 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Transverse Tensile Strength ISO 4136 (BS EN):2012
558 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Transverse Tensile Strength IS 3600 Part-3: 2018
559 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Transverse Tensile Strength IS 3600 Part-4:1984Ra: 2011
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 58 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
560 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Transverse Tensile Strength DIN EN ISO 5178:2015
561 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded Steel Coupon Plate andWeldments
Transverse Tensile Strength AWS D 1.1: 2015
562 MECHANICAL-METALLOGRAPHYTEST
CORROSION TEST AusteniticStainless Steel
Inter Granular Corrosion - A Microstructure Method-A ASTM A262: 2015
563 MECHANICAL-METALLOGRAPHYTEST
CORROSION TEST AusteniticStainless Steel
Inter Granular Corrosion - F Microstructure Method-F ASTM A262: 2015 :2015
564 MECHANICAL-METALLOGRAPHYTEST
Ferritic Stainless Steel Inter Granular Corrosion - X Weight loss - X ASTMA763: 2015
565 MECHANICAL-METALLOGRAPHYTEST
Ferritic Stainless Steel Inter Granular Corrosion - Y Weight loss - Y ASTMA763: 2015
566 MECHANICAL-METALLOGRAPHYTEST
Nickel base and chromium bearingalloys
Corrosion test - A Method A, ASTM G28-02: 2015
567 MECHANICAL-METALLOGRAPHYTEST
Nickel base and chromium bearingalloys
Corrosion test - B Method B ASTM G28-02: 2015
568 MECHANICAL-METALLOGRAPHYTEST
Case hardened steel Case depth measurement IS 6416-1988 RA: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 59 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
569 MECHANICAL-METALLOGRAPHYTEST
Cast iron Distribution IS 7754 : 1975 RA :2018
570 MECHANICAL-METALLOGRAPHYTEST
Cast iron Distribution ASTM E1245-03: 2016
571 MECHANICAL-METALLOGRAPHYTEST
Cast iron Graphite Type IS 7754:1975 RA: 2018
572 MECHANICAL-METALLOGRAPHYTEST
Cast iron Graphite Type ASTM E1245-03: 2016
573 MECHANICAL-METALLOGRAPHYTEST
Cast iron Nodularity IS 7754:1975 RA: 2018
574 MECHANICAL-METALLOGRAPHYTEST
Cast iron Nodularity ASTM E1245-03: 2016
575 MECHANICAL-METALLOGRAPHYTEST
Cast iron Nodule count IS 7754:1975 RA: 2018
576 MECHANICAL-METALLOGRAPHYTEST
Cast iron Nodule count ASTM E1245-03: 2016
577 MECHANICAL-METALLOGRAPHYTEST
Cast iron Size IS 7754:1975 RA: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 60 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
578 MECHANICAL-METALLOGRAPHYTEST
Cast iron Size ASTM E1245-03: 2016
579 MECHANICAL-METALLOGRAPHYTEST
Copper Alloy Stress Corrosion Cracking inCopper Alloys
ASTM B858: 2018
580 MECHANICAL-METALLOGRAPHYTEST
Copper Alloy Stress Corrosion Cracking inCopper Alloys
NACE TM 0177: 2016
581 MECHANICAL-METALLOGRAPHYTEST
CORROSION TEST AusteniticStainless Steel
Inter Granular Corrosion - C Microstructure Method-C ASTM A262: 2015
582 MECHANICAL-METALLOGRAPHYTEST
CORROSION TEST AusteniticStainless Steel
Inter Granular Corrosion - E Microstructure Method-E ASTM A262: 2015
583 MECHANICAL-METALLOGRAPHYTEST
CORROSION TESTAusteniticStainless Steel
Inter Granular Corrosion - B Microstructure Method-B ASTM A262: 2015
584 MECHANICAL-METALLOGRAPHYTEST
Duplex Stainless Steel Crevice Pitting Corrosion test ASTM G48-11 : 2015
585 MECHANICAL-METALLOGRAPHYTEST
Duplex Stainless Steel Detection of inter Productlic phasesMethod C
ASTM A 923: 2014
586 MECHANICAL-METALLOGRAPHYTEST
Duplex Stainless Steel Detection of inter ProductlicphasesMethod A
ASTM A 923: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 61 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
587 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
IGC Test Method-C IS 10461(Part-2):1994RA: 2016
588 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
Huey Test ISO 3651(Part 1): 1998
589 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
Huey Test IS 10461(Part-1):1994RA: 2016
590 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
IGC Test Method-A (MonypennyStrauss Test)
IS 10461(Part-2):1994RA: 2016
591 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
IGC Test Method-A (MonypennyStrauss Test)
ISO 3651(Part 2): 1998
592 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
IGC Test Method-B IS 10461(Part-2):1994RA: 2016
593 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
IGC Test Method-B ISO 3651(Part 2): 1998
594 MECHANICAL-METALLOGRAPHYTEST
Ferritic / austenitic and duplexStainless Steel
IGC Test Method-C ISO 3651(Part 2): 1998
595 MECHANICAL-METALLOGRAPHYTEST
Ferritic Stainless Steel Inter Granular Corrosion Microstructure Method-W, Z ASTM A763:2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 62 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
596 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Grain Size ASTM E112: 2013
597 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Grain Size IS 4748:2009 Ra: 2017
598 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Grain Size ISO 643: 2012
599 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Grain Size ASTM E112: 2013
600 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Grain Size IS 4748:2009 Ra: 2017
601 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Grain Size ISO 643: 2012
602 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination IS 7307(1):1974 RA:2019
603 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination ASME Sec.IX: 2017
604 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination IS 7310(1):1974 RA:2011
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 63 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
605 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination BS EN ISO 17639:2013
606 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination IS 7307(1):1974 RA:2019
607 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination ASME Sec.IX: 2017
608 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination IS 7310(1):1974 RA:2011
609 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Macro Examination BS EN ISO 17639:2013
610 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure ASM Handbook Sec.IX: 2004
611 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure ASTM E407-2007 e1:2015
612 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure EN 287-1: 2011
613 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure ASM Handbook Sec.IX: 2004
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 64 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
614 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure ASTM E407-2007 e1:2015
615 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure EN 287-1: 2011
616 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure-Iron and Iron Alloy IS 7739 Part-5:1976Ra: 2018
617 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure- Nickel and NickelAlloy
IS 7739 Part-8:1975Ra: 2018
618 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure-Alluminium andAlluminium alloy
IS 7739 Part-3:1975Ra: 2018
619 MECHANICAL-METALLOGRAPHYTEST
Ferrous and Non-Ferrous Product Microstructure-Copper and CopperAlloy
IS 7739 Part-4:1975Ra: 2018
620 MECHANICAL-METALLOGRAPHYTEST
Ferrous Metal & Alloys Hydrogen Induced Cracking NACE TM 0284: 2016
621 MECHANICAL-METALLOGRAPHYTEST
Ferrous Metal & Alloys Hydrogen Induced Cracking NACE TM 0284: 2016
622 MECHANICAL-METALLOGRAPHYTEST
Ferrous Metals & Alloys Chloride Stress Corrosion CrackingTest
ASTM G 36: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 65 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
623 MECHANICAL-METALLOGRAPHYTEST
Ferrous Metals & Alloys Chloride Stress Corrosion CrackingTest
ASTM G36: 2018
624 MECHANICAL-METALLOGRAPHYTEST
Stainless steel Inclusion or Second-PhaseConstituent Content of Metals byAutomatic Image Analysis
ASTM E1245: 2016
625 MECHANICAL-METALLOGRAPHYTEST
Stainless steel Volume Fraction by SystematicManual Point Count
ASTM E 562: 2011
626 MECHANICAL-METALLOGRAPHYTEST
Steel Depth of decarburization IS 6396 : 2000 RA:2018
627 MECHANICAL-METALLOGRAPHYTEST
Steel Inclusion rating IS 4163:2004 RA :2017
628 MECHANICAL-METALLOGRAPHYTEST
Steel Inclusion rating ASTM E 45 : 2018
629 MECHANICAL-METALLOGRAPHYTEST
Steel Inclusion rating DIN 50602 : 1985 RA:2009
630 MECHANICAL-METALLOGRAPHYTEST
Super Duplex Stainless Steel &Duplex Stainless Steel, StainlessSteel, Ferrous Metals and Its Alloys
Sulphide Stress Cracking & StressCorrosion Cracking -Method A,B,C
NACE TM 0177: 2016
631 MECHANICAL-METALLOGRAPHYTEST
Super Duplex Stainless Steel &Duplex Stainless Steel, StainlessSteel, Ferrous Metals and Its Alloys
Sulphide Stress Cracking & StressCorrosion Cracking -Method A,B,C
W/OPN/48 Issue. No.1: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 66 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
632 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Melt Flow Index 13360 Part 4 Sec-1 Ra.2000: 2013
633 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Water Absorption IS 13360 Part 8 Sec 1Ra.1997: 2013
634 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Ash Content & Sulphate AshContent
IS 12235 (Part-17):2004 Ra: 2014
635 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Compression test ASTM D4280: 2015
636 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Density & Specific Gravity ASTM D792: 2013
637 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Density & Specific Gravity IS 12235 Part-14:2004Ra: 2014
638 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products DimensionsNominal diameter/Outside diameter
IS 12235(Part-1):2004Ra: 2014
639 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Elongation, Elongation at Break,Elongation at Yield
ASTM D638: 2014
640 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Flattening Test IS 12235 (Part19):2004 Ra: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 67 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
641 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Flexural Strength ASTM D4280: 2015
642 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products High Temp. Test IS 12235(Part-16):2004Ra: 2014
643 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Izod Impact ASTM D256-e1: 2010
644 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Longitudinal Reversion IS 12235(Part-5):2004Ra: 2014
645 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Melt Flow Index ASTM D1238: 2013
646 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Resistance to Dichloromethane IS 12235(Part-11):2004Ra: 2014
647 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Resistance to Sulphuric Acid IS 12235(Part-7):2004Ra: 2014
648 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Stress Relief Test IS 12235(Part-6): 2004
649 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Tensile Strength ASTM D638: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 68 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
650 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Tensile Strength IS 12235 Part-13:2004Ra: 2014
651 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Wall thickness/ ThicknessVisualappearance / Workmanship
IS 12235(Part-1):2004Ra: 2014
652 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic and Plastic Products Water Absorption ASTM D570-98: 2010
653 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness (Shore A) AST MD2240: 2015
654 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness (Shore A) IS 3400 (Part 23):2002RA: 2017
655 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness (Shore A) ISO 48 Part 4: 2018
656 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness (Shore D) ASTM D2240: 2015
657 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness (Shore D) IS 3400 (Part 23):2002RA: 2017
658 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness (Shore D) ISO 48 Part 4: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 69 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
659 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Density IS 3400 (Part 9) : 2014
660 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Density IS 3400 (Part 9) : 2014
661 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Elongation at Break IS 3400(Part 1):2012Ra: 2017
662 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Elongation at Break ISO 37: 2011
663 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Elongation at Break ASTM D 412 : 2016
664 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Elongation at Break IS 3400(Part 1):2012:2017
665 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Elongation at Break ISO 37: 2011
666 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Elongation at Break ASTM D 412 : 2016
667 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore A) ASTM D2240 : 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 70 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
668 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore A) IS 3400 (Part 23):2002RA: 2017
669 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore A) ISO 48 Part 4: 2018
670 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore A) ASTM D2240 : 2015
671 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore A) IS 3400 (Part 23):2002RA: 2017
672 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore A) ISO 48 Part 4: 2018
673 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore D) ASTM D2240: 2015
674 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore D) IS 3400 (Part 23):2002RA: 2017
675 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore D) ISO 48 Part 4: 2018
676 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore D) ASTM D2240: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 71 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
677 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore D) IS 3400 (Part 23):2002RA: 2017
678 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Hardness(Shore D) ISO 48 Part 4: 2018
679 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Tensile Strength IS 3400(Part 1):2012Ra: 2017
680 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Tensile Strength ISO 37: 2011
681 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Tensile Strength ASTM D 412 : 2016
682 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Tensile Strength IS 3400(Part 1):2012Ra: 2017
683 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Tensile Strength ISO 37: 2011
684 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber and Rubber Products Tensile Strength ASTM D 412 : 2016
685 MECHANICAL- SOILAND ROCK
Soil California Bearing Ratio IS 2720 (Part–16):1987 RA: 2016
686 MECHANICAL- SOILAND ROCK
Soil Grain size analysis IS 2720 (Part–4): 1985RA : 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 72 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
687 MECHANICAL- SOILAND ROCK
Soil Liquid Limit IS 2720 (Part–5): 1985RA: 2015
688 MECHANICAL- SOILAND ROCK
Soil Plastic limit IS 2720 (Part–5): 1985RA : 2015
689 MECHANICAL- SOILAND ROCK
Soil Proctor test (by Light compaction)MDD
IS 2720 (Part–7):1980Ra: 2016
690 MECHANICAL- SOILAND ROCK
Soil Proctor test (by Light compaction)OMC
IS 2720 (Part–7):1980Ra: 2016
691 MECHANICAL- SOILAND ROCK
Soil Proctor test (by Heavy compaction)MDD
IS 2720 (Part–8): 1983RA : 2015
692 MECHANICAL- SOILAND ROCK
Soil Proctor test (by Heavy compaction)OMC
IS 2720 (Part–8) 1983RA: 2015
693 MECHANICAL- SOILAND ROCK
Soil Specific gravity IS 2720 (Part–3,Sec–1) : 1980: 2016
694 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES
Non Destructive Testing Rebound Hammer Test IS 13311 (Part–2) :1991: 2013
695 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES
Non Destructive Testing Ultrasonic Pulse Velocity Tests IS 13311 (Part–1) :1991 RA: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 73 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
Site Facility
1 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Adhesion Test/ Pull Off Test ASTM D4541: 2017
2 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Coating Thickness IS 3203:1982 RA: 2016
3 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS
Metal Coating Coating Thickness ASTM B 499-09: 2014
4 CHEMICAL- METALS& ALLOYS
Positive Material Identification Segregation of mix up Alloys(Fe,Cu, Al & Ni base alloys)
ASTM E 1916: 2011
5 CHEMICAL- METALS& ALLOYS
Positive Material Identification Segregation of mix up Alloys (Fe,Cu, Al & Ni base alloys)
W/OPN/12 IssueNo.02: 2016
6 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES
Reinforced Concrete structure Pile integrity ASTM D 5882: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6123 Page No. : 74 / 74
Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019