l17 1960tq (f-e,dual)-enggscs-b2c.lge.com/downloadfile?fileid=krowm000176604.pdf · to attach the...

Make sure to read the Important Precautions before using the monitor.

Keep the User's Guide(CD) in an accessible place for furture reference.

See the label attached on the monitor and give the information to your

dealer when you ask for service.

L1760TQL1960TQL1760TGL1960TGL1760TRL1960TRL1960TC

User’s Guide

A1

This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential electrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another powercord, make sure that it is certified by the applicable national standards if not beingprovided by the supplier. If the power cable is faulty in any way, please contact themanufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that thesocket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications ofthis manual or listed on the display. If you are not sure what type of power supplyyou have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed powercords and broken plugs. They may result in a shock or fire hazard. Call your servicetechnician for replacement.

Do not Open the Display.There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :Do not place the display on a sloping shelf unless properly secured.Use only a stand recommended by the manufacturer.Do not drop an object on or apply impact to the product. Do not throw any toysor objects on the product screen. It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:Always turn the display OFF if you leave the room for more than a short periodof time. Never leave the display ON when leaving the house.Keep children from dropping or pushing objects into the display's cabinetopenings. Some internal parts carry hazardous voltages.Do not add accessories that have not been designed for this display.When the display is to be left unattended for an extended period of time, unplugit from the wall outlet.In the presence of thunder and lightning, never touch the power cord and signalcable because it can be very dangerous. It can cause electric shock.

Important Precautions

A2

Important Precautions

On InstallationDo not allow anything to rest upon or roll over the power cord, and do not place thedisplay where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the release ofheat generated during operation. If these openings are blocked, built-up heat cancause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.Place the display in a built-in enclosure unless proper ventilation is provided.Cover the openings with cloth or other material.Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may causesome afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality foryour LCD display. If used under any mode except the recommended resolution,some scaled or processed images may appear on the screen. However, this ischaracteristic of the fixed-resolution LCD panel.

On CleaningUnplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the displayscreen because over-spraying may cause electrical shock.

On RepackingDo not throw away the carton and packing materials. They make an idealcontainer in which to transport the unit. When shipping the unit to anotherlocation, repack it in its original material.

On DisposalThe fluorescent lamp used in this product contains a small amount of mercury.Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regulations ofyour local authority.

Connecting the Display

A3

ImportantThis illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Once you connect the stand base, try not to disconnect it.Do not carry the monitor upside down holding only the stand base. The monitor mayfall and get damaged or injure your foot.

Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off.

Attaching/Separating the stand base

1. Place the monitor with its front facing downward on a soft cloth.

2. Make sure the stand base directs to the correct direction(Front, Rear) and turn thelocking device at the bottom to OPEN to assemble the unit. After assembling the unit, turnthe locking device to LOCK before use.

Turn the locking device to OPEN to separate the stand base.

3. Once assembled take the monitor up carefully and face the front side

4. After connecting the cable, adjust the angle of the panel for easy use.

(To connect the cable, see page A5 for reference.)

Tilt Range : -5˚~20˚ Warning: Do not put your hand (finger)between head section and stand section whenadjusting angle of screen. Your hand (finger) may get caught or wounded.

Ergonomic

It is recommended that in order to maintainan ergonomic and comfortable viewingposition, the forward tilt angle of the monitorshould not exceed 5 degrees.

Stand BodyStand Base

LOCKOPEN

-5。 20。Head section

Stand section

A4


To attach or separate the back cap1. To attach the back cap, fix into the 3 holes first then slide it up to fit to the upper

groove.

2. To separate the back cap, hold the bottom part and pull it out.

Kensington Security SlotConnected to a locking cable that can be purchasedseparately at most computer stores

Back Cap

NOTE- Cover the back cap after connecting the cables before use.

(To connect the cable, see page A5 for reference.)

DVI-D DC-IN D-SUB

A5


Connecting with the PC

1. Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off.

2. Connect the signal cable . When attached, tighten the thumbscrews to secure the connection.

3. Connect the power cable with the AC-DC adapter (AC-DC power supply) , andthen plug the cable in the outlet.

Wall-outlet type

DVI-D(This feature is not available in all countries.)

Mac adapterFor Apple Macintosh use, a separate plug adapter is needed to changethe 15 pin high density (3 row) D-sub VGA connector on the suppliedcable to a 15 pin 2 row connector.

4. Touch the power button in front to turn on the monitor.The 'Self Image Setting Function' will automatically run when the monitor is on. (Only Analog Mode)

NOTE This is a simplified representationof the rear view.This rear view represents ageneral model; your display maydiffer from the view as shown.

1

3 2

MAC

[ Arranging the cables]

[ Connecting the cables]

1

2

PC

PC

DVI-D DC-IN D-SUB

3

NOTE‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the userconnects the monitor for the first time, this function automatically adjusts the display to optimal settings for individualinput signals. ‘SET/AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tiltedscreen while using the device or after changing screen resolution, press the SET/AUTO function button to improveresolution.

A6

Control Panel Functions

MENU Button Use this button to enter or exit the On Screen Display.

Control Function

OSD LOCKED/UNLOCKEDThis function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushingthe MENU button for several seconds. The message"OSD UNLOCKED" should appear.

+ - ButtonsUse these buttons to select or adjust functions in the OnScreen Display.

For more information, refer to page A13.

Use this button to make D-Sub or DVI connector active.This feature is used when two computers are connectedto the display. The default setting is D-Sub.

+ Button(SOURCE Hot key)

Front Panel Controls Side

SOURCE

SOURCE

MENU

MENU

SET/AUTOSET/AUTO

EngineEngine

- Button( )

A7

Control Panel Functions

This Indicator lights up blue when the displayoperates normally(On Mode). If the display is in SleepMode (Energy Saving), this indicator color changes to amber.

Touching on the button for several seconds willpower up the unit and touching on it again forseveral seconds will power off.

Power Button

Power Indicator

Use this button to enter a selection in the On Screen Display.

SET/AUTOButton

AUTO IMAGE ADJUSTMENTWhen adjusting your display settings, always pressthe SET/AUTO button before entering the On ScreenDisplay(OSD). This will automatically adjust yourdisplay image to the ideal settings for the currentscreen resolution size (display mode).

The best display mode is

1280 x 1024

Control Function

A8

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The following section is an outline of the available adjustments and selectionsyou can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the MENU Button, then the main menu of the OSD appears.

To access a control, use the - or + Buttons. When the icon you wantbecomes highlighted, press the SET/AUTO Button.

Use the - / + Buttons to adjust the image to the desired level. Use theSET/AUTO Button to select other sub-menu items.

Push the MENU Button once to return to the main menu to select anotherfunction. Push the MENU Button twice to exit from the OSD.

NOTEAllow the display to stabilize for at least 30 minutes before making image adjustments.

SET/AUTOMENU MENU- + - +

A9

NOTE

The order of icons may differ depending on the model (A9~A13).

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment,and setting menus.

To adjust the brightness,contrast and gamma of thescreen

PICTURE

COLOR

POSITION

TRACKING

SETUP

Main menu Sub-menu A D Reference

PRESET

RED

GREEN

BLUE

To adjust the position of thescreen

To customize the color ofthe screen

To customize the screenstatus for a user's operatingenvironment

To improve the clarity andstability, sharpness of thescreen

BRIGHTNESS

CONTRAST

GAMMA

HORIZONTAL

VERTICAL

CLOCK

PHASE

SHARPNESS

WHITE BALANCE

POWER INDICATOR

FACTORY RESET

LANGUAGE

OSD HORIZONTAL

POSITION VERTICAL

sRGB6500K9300K

: AdjustableA : Analog InputD : Digital Input

To select or customize desired image settings

FLATRON

F-ENGINEMOVIE / TEXT

USER

NORMAL

A10


NOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.

You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.

Press the MENU Button, then the main menu of the OSD appears.

Menu Name

Icons

Button Tip

P I C T U R E

Sub-menus

MENU : Exit: Adjust (Decrease/Increase)

SET : Enter: Select another sub-menu

- +

A11


Main menu Sub menu Description

BRIGHTNESS

CONTRAST

GAMMA

To adjust the brightness of the screen.

To adjust the contrast of the screen.

Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues display high contrast images.

P I C T U R E

PICTURE

PRESET

RED

GREEN

BLUE

• sRGB: Set the screen color to fit theSRGB standard colorspecification.

• 6500K: Slightly reddish white.• 9300K: Slightly bluish white.

Set your own red color levels.

Set your own green color levels.

Set your own blue color levels.

COLOR

HORIZONTAL

VERTICAL

To move image left and right.

To move image up and down.

POSITION

C O L O R

P O S I T I O N

MENU : Exit: Decrease: Increase

SET : Select another sub-menu

-+



-+



-+

A12



CLOCK

PHASE

SHARPNESS

To minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange.

To adjust the focus of the display. This item allows you to remove anyhorizontal noise and clear or sharpenthe image of characters.

To adjust the clearness of the screen.

TRACKING

If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only whenthe input signal is an analog signal.

SETUP To choose the language in which thecontrol names are displayed.

To adjust position of the OSD windowon the screen.

LANGUAGE

OSDPOSITION

WHITEBALANCE

FACTORYRESET

If the output of the video card is differentthe required specifications, the colorlevel may deteriorate due to videosignal distortion. Using this function, thesignal level is adjusted to fit into thestandard output level of the video cardin order to provide the optimal image.Activate this function when white andblack colors are present in the screen.

POWERINDICATOR

Restore all factory default settings except"LANGUAGE."

T R A C K I N G

S E T U P

M E N U - + SET

S E T U P

M E N U - + SET Use this function to set the powerindicator on the front side of the monitorto ON or OFF.If you set OFF, it will go off. If you set ON at any time, the powerindicator will automatically be turned on.

Press the button to reset immediately.+



-+

MENU : Exit: Adjust: Adjust


-+

A13


Icons

Menu Name

Sub-menu Name


To adjust the USER sub-menu function,Press the SET Button

MOVIETEXT

NORMAL

BRIGHTNESS

ACE1

2RCM

SAVE

U S E R

M E N U SET

USER

When you execute F-ENGINE, two tones will appearon the screen as shown. The applied screen willappear on the left side, whereas the non-appliedscreen will appear on the right side.Touch the SETbutton to use the adjusted screen.

FLATRON F-ENGINE Screen when applied Screen when not applied

The OSD screen will appear when you touch the button on the right side of the monitor.

TEXT: For text images (Word processing etc.)

Select the sub-menu using the SET buttonand save the YES value using the buttons.

SAVE

MOVIE: For animation images in videos or movies

This is under normal operating conditions.

This feature lets you easily select the best desiredimage condition optimized to the environment(ambient illumination, image types etc).

UserYou can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different envir

... (Brightness): Adjusts screen brightness.

...ACE(Adaptive Clarity Enhancer): Selects the clarity mode.

...RCM(Real Color Management): Selects the color mode.Not appliedGreen enhance Flesh toneColor Enhance

0

1

2

3

MENU : Exit, : Move

SET : Select- +



-+

A14

Troubleshooting

No image appears

Check the following before calling for service.

No image appears

Do you see a "OSD LOCKED" message on the screen?

� Is the power cord of thedisplay connected?

� Is the power on and thepower indicator blue orgreen?

� Is the power indicatoramber?

� Do you see an "OUT OFRANGE" message onthe screen?

� Do you see a "CHECKSIGNAL CABLE"message on thescreen?

• Check and see if the power cord is connectedproperly to the power outlet.

• Adjust the brightness and the contrast.

• If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboard tobring up the screen.

• Try to turn on the PC.

• This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.

• This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.

• You can secure the current control settings,so that they cannot be inadvertently changed.You can unlock the OSD controls at any timeby pushing the MENU button for severalseconds: the message “OSD UNLOCKED” will appear.

� Do you see “OSDLOCKED” when youpush MENU button?

A15

Troubleshooting

Display image is incorrect

� Display Position isincorrect.

� On the screenbackground, verticalbars or stripes arevisible.

� Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.

� The screen color ismono or abnormal.

� The screen blinks.

• Press the SET/AUTO button to automaticallyadjust your display image to the ideal setting. If the results are unsatisfactory, adjust the imageposition using the H position and V position iconin the on screen display.

• Check Control Panel --> Display --> Settingsand see if the frequency or the resolution werechanged. If yes, readjust the video card to therecommend resolution.

• Press the SET/AUTO button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease thevertical bars or stripes using the CLOCK icon inthe on screen display.

• Press the SET/AUTO button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.

• Check Control Panel --> Display --> Settingsand adjust the display to the recommendedresolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits(true color).

• Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.

• Make sure the video card is properly inserted inthe slot.

• Set the color setting higher than 24 bits (true color)at Control Panel - Settings.

• Check if the screen is set to interlace mode and ifyes, change it to the recommend resolution.

A16

Troubleshooting

Have you installed the display driver?

� Have you installed thedisplay driver?

� Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message?

• Be sure to install the display driver from the displaydriver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver fromour web site: http://www.lge.com.

• Make sure to check if the video card supportsPlug&Play function.

A17

Specifications 17 inch

Display

Sync Input

Video Input

Resolution

Plug&Play

PowerConsumption

Dimensions&Weight

Tilt RangePower Input

AC-DC AdapterEnvironmentalConditions

Stand Base Power cord

NOTEInformation in this document is subject to change without notice.

17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coatingVisible diagonal size : 43.2 cm0.264 mm pixel pitch

Horizontal Freq. Analog : 30 - 83 kHz (Automatic)Digital : 30 - 71 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)Input Form

SOG (Sync On Green), DigitalSignal Input 15 pin D-Sub Connector

DVI - D connector (Digital)Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Max Analog : VESA 1280 x 1024 @75 HzDigital : VESA 1280 x 1024 @60 Hz

Recommend VESA 1280 x 1024 @60 Hz

DDC 2B

On Mode : 30 W(Typ.)Sleep Mode : 1 W(Typ.)Off Mode ≤ 1 W

Width x Height x Depth[1] 39.21cm(15.44inches) x 39.10cm(15.39inches) x 22.60cm(8.90inches)[2] 39.21cm(15.44inches) x 44.19cm(17.40inches) x 9.62cm(3.78inches)Net 3.7 kg (8.16 lbs)

Tilt -5˚~20˚12V 3.0A

DVE, DSA-0421S-12 1 42 or Lien Chang, LCAP07F

Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-Condensing

Storage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 90 % non-Condensing

Attached( ), Detached ( O )

Wall-outlet type or PC-outlet type

SOURCE

SOURCE

MENU

MENU

S ET / AUTOS ET / AUTO

En g in eEn g in e

(Width) (Depth)

(Height)

SOURCE

SOURC E

MENU

MENU


En g in eEn g in e

(Width) (Depth)

(Height)

Separate Sync, Positive / Negative

A18

Specifications 19 inch

NOTEInformation in this document is subject to change without notice.

Display

Sync Input

Video Input

Resolution

Plug&Play

PowerConsumption

Dimensions&Weight

Tilt RangePower Input

AC-DC AdapterEnvironmentalConditions

Stand Base Power cord

19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coatingVisible diagonal size : 48.19 cm0.294 mm pixel pitch

Horizontal Freq. Analog : 30 - 83 kHz (Automatic)Digital : 30 - 71 kHz (Automatic)

Vertical Freq. 56 - 75 Hz (Automatic)Input Form

SOG (Sync On Green), DigitalSignal Input 15 pin D-Sub Connector

DVI - D connector (Digital)Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Max Analog : VESA 1280 x 1024 @75 HzDigital : VESA 1280 x 1024 @60 Hz

Recommend VESA 1280 x 1024 @60 Hz

DDC 2B

On Mode : 35 W(Typ.)Sleep Mode : 1 W(Typ.)Off Mode ≤ 1 W

Width x Height x Depth[1] 42.99cm(16.93inches) x 42.61cm(16.78inches) x 22.60cm(8.90inches)[2] 42.99cm(16.93inches) x 47.86cm(18.84inches) x 9.71cm(3.82inches)

Net 4.6 kg (10.14 lbs)

Tilt -5˚~20˚12V 3.0A

DVE, DSA-0421S-12 1 42 or Lien Chang, LCAP07F

Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-Condensing

Storage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 90 % non-Condensing

Attached( ), Detached ( O )

Wall-outlet type or PC-outlet type

SOURCE

SOURCE

MENU

MENU


En g in eEn g in e

(Width) (Depth)

(Height)

SOURCE

SOURC E

MENU

MENU

S ET /AUTOS ET /AUTO

En g in eEn g in e

(Width) (Depth)

(Height)

Separate Sync, Positive / Negative

A19

Specifications

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

123456789

1011

*12**13

640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 6241024 x 7681024 x 7681152 x 8701152 x 9001280 x 10241280 x 1024

31.46931.46831.46937.50037.87946.87549.72548.36360.02368.68161.80563.98179.976

70706075607575607575656075

VGAVGAVGAVESAVESAVESAMACVESAVESAMACVESAVESAVESA

Indicator

On ModeSleep ModeOff Mode

blueamber

Off

LED ColorMODE

Preset Modes (Resolution)

* Recommend Mode** Only Analog Mode

A20

Installing the Wall mount plate

DVI-D DC-IN D-SUB

Wall mount plate(Separate purchase)This is stnad-type or will mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mount plate ispurchased.

This monitor satisfies the specifications of the Wall mount plate orthe interchange device.1. Place the monitor with its front facing downward on a soft cloth.2. Separating the back cap3. Press and hold on to the button on the right side of the stand body and fold

the stand base in the direction of the arrow which it indicates.

4. Install the Wall mount plate.

Digitally yours

l17 1960tq (f-e,dual)-enggscs-b2c.lge.com/downloadfile?fileid=krowm000176604.pdf · to attach the...

Documents