l t.o n - welcome to the nawcc! watch materials catalog ... trations of parts of currently...

HAMILTON LIBRARY

FRANKLIN INSTITUTE LIBRARY PHILADELPHIA, PA.

GIFT OF

HAmLTON ,JATCH COMPANY

HAM I L T.O N WATCH

•

HAMILTON WATCH MATERIALS CATALOG

PREFACE

The practical value of this Materials Catalog will be obvious to watch repairmen everywhere. But what may not be so obvious is that this catalog and the inventory of genuine materials it represents is but part of Hamilton's total facilities devoted to maintenance of service on its product. Informative technical and service literature on Hamilton watches is another. Factory service when and as needed is still another of these facilities. The keystone of the success of all of these facilities is their intelligent use by the watchmaker. And of American watchmakers, Hamilton is indeed proud. To them, more than anyone else in the industry, goes the credit for keeping America's Fine Watch fine.

MATERIALS FOR HAMILTON WAR TIMEPIECES are not included in this catalog. Because repair materials on war timepieces were generally taken over by the contracting branch of the government at the end of the war and because few war timepieces were sold for non-military use, no general statement as to the availability of materials can be made. There are no parts available, for instance, which are peculiar to the 4992B, a 16 size, 24 hour dial, sweep seconds, navigation watch. Similarly parts peculiar to Grade 2987, a 6/0 size, 12 hour dial, sweep seconds, wrist model are not available. Certain materials for still other war timepieces are also unavailable. Repair parts for the Hamilton 35 size Navigation Watch (also known as the Hamilton Chronometer Watch) and the Hamilton Marine Chronometer are available. War timepieces employing standard civilian movements such as the 992B, the 987A, and the 987S, present no parts problems. Materials for all war timepieces, therefore, require separate inquiry direct to the Material Sales Department.

CHANGES OVER PREVIOUS MATERIAL CATALOG are in some instances significant. Neither pinions nor wheels separately, nor staffs, where applicable, for center, third, and fourth are any longer available. Only wheel and pinion complete, or wheel and pinion and staff complete, as the case may be, are now available. The escape wheel, the escape pinion, and the escape wheel complete with pinion continue to be available as before. This change has been instituted to simplify inventory b<?th here and in the watchmaker's possession as well as to afford labor savings in the trade of unstaking andrestaking to replace components of the wheel and pinion assembly. Illustrations of selected grades of the different size Hamilton movements made have been added to assist the watchmaker in identifying movements. Illustrations of parts of currently manufactured movements have been replaced by enlarged illustrations of hard-to-identify parts of all Hamilton sizes and grades. Type style on tabular listings has been changed for easier reading and more rapid reference. Dial illustrations are photographic and therefore easier to indentify. Genuine Hamilton straps for replacement purposes are available again,-see page 41 for details. Hamilton material cabinets and mainspring cabinets continue to be shown in this catalog.

Watch oil offered in our previous catalog is no longer available. Hamilton makes its own oil for the lubrication of new watch movements but is not offering it for sale for general use.

TO ORDER HAMILTON MATERIAL secure the movement grade number which is engraved on one of the bridges of virtually all Hamilton movements, then consult the index on page 2. Hamilton movements which do not have grade numbers engraved on them do carry serial numbers which can be checked against the serial numbers listed on pages 12 to 16 to secure the grade number. All materials are classified by watch size and grade on pages indicated in the index. When the material desired has been located under the appropriate grade, the order can be prepared. Always use catalog number and part name on material orders. All orders for Hamilton material should be sent to Hamilton material jobbers. The Material Sales Department on request will furnish a list of jobbers.

Printed in U. S. A. 1642-15M 00825

Copyright 1947 Hamilwn Watch Co.

l4ncaswr, Pa.

TABLE OF CONTENTS AND GLOSSARY

TABLE OF CONTENTS

PAGE PAGE

Description of Hamilton Watch Grades . . 7 Material Descriptions and Catalog Numbers (Cont'd)

Dial Descriptions . . ..... 35-39

Dial Illustrations ..

Hand Descriptions.

Materials Difficult to Identify (Illustrations).

Mainspring Chart.

Mainspring File . .. ... . .. .

Material Cabinet. ..

1\1aterial Descriptions and Catalog Numbers

18 Size Movements Grades 924, 925, 926, 927, 928, 929,

930, 931, 932, 933, 934, 935, 936, 937, 938, 939, and 948 .... . ....... .

Grades 940, 941, 942, 943, 944, and 946 .

16 Size Movements Grades 950, 952, 996, 950E, and 950B ..... Grades 954, 962, 963, 966, 967, 972, 973,

956, 964, 965, 968, 969, 974, 975, 976, 977, and 978. . . ....... .

Grades 960, 961, 970, 971, 990, 991, 992, 993, 994, and 992B . .

Grade 992E ...

12 Size Movements

32-34

40

10-11

31

42

42

18 19

20

21

22 23

10 Size Movements Grades 917, 921, and 923.

° Size Movements Grades 981, 983, and 985 ..... . . .

6/ 0 Size Movements Grades 986, 988, 986A. . . . . . . ..... Grades 987, 987E, 987F, 987 A, 987S, and

979.

12/ 0 Size Movements Grade 401.

14/ 0 Size Movements Grades 980, 980A, 980B, 982, and 982M . .

18/ 0 Size Movements Grades 989 and 989E ..

20/ 0 Size Movements Grade 997 .......... .

21/ 0 Size Movements Grade 721. .... Grades 995 and 995A.

22/ 0 Size Movements Grades 911 and 911M.

IVlovernent Illustrations .

Preface . ................... .

Serial NUlllbers ... . .. . . .

25

25

26

27

28

28

29

29

29 30

30

3-5

1

12-16 Grades 400 (Thin Model), 900, 910, 914,

and 920.. . ... .. .......... . 23 24

Straps. . . ....... ... .... 41

Grades 902, 904, 912, 916, 918, and 922 . View of a Typical Hamilton Watch (Exploded). 8-9

GLOSSARY OF TERMS AND ABBREVIATIONS

A.G.M.-Applied Gold Marker A.G.N.- Applied Gold Numeral n.F.- Black Figure n.M.- Blind Man c.p .- Canadian Pacific D.R .- Double Roller D.S.- Double Sunk H.A.- Heavy Arabic H.G.- Heavy Gothic Htg.- Hunting HWW- Hayden W. Wheeler

2

Incl .- Inclusive L.A.- Light Arabic L.S.- Lever Set Lurn.- Luminous M.n.- Motor Barrel Movt.-Movement No.-Number O.D.- Outside diameter O.F.- Open face . P.S.- Pendant Set S.A.- Strong Arabic

S.R.-Single Roller S.S.-Single Sunk Str.-Strength T -'-T shape of mainspring brace W.F.- White figure

Complete- an assembly which is complete with every component for that assembly

Unset- Jewel, not in a setting, usually for friction use in a bridge or plate

HAMILTON WATCH COMPANY LANCASTER, PENNA., U.S.A .

Manufacturers of America's FINE W utch

HAMILTON WATCH MOVEMENT ILLUSTRATIONS

G IIADE 936 Open face, 17 jewels, s ingle roller before 1'0. 426001 , double ro lle r after K o . 426000

GHADE 974 Open face, ~ plate mov t ., 17 jewels, Single roll er before No. 24700 1, double roller after 1\0' 24 7000

GHADE 992B Open face, U platelllovt .. 2 1 jewels, clouble roller'

18 SIZE

16 SIZE

GHADE 950 O pen face , bridge movt. , 2<3 jewels, double roller

GHAI)E 925 Hunting. 17 jewels. s ingle ,'oller

GHADE 992 Open face, :!i v laLe movt .. 21 jewels, single roller before N o. 377001 double r oUer after No. 379000

GRADE 950B O pon fuce, bridge movt .. n jewels, doub le roller

3


GHADE 918 Open face , :u platcmovt., 19 jewels, double roller

GRADE 917 Open face, % plate rnov!,. , ! 7 jewels, double roller

GRADE 902 Open face, bridge movt., 19 jewels, double roller

12 SIZE

10 SIZE

GRADE 922 Open face , bridge movt., 23 jewels, double roller

GRADE 921 Open face, bridge movt., 21 j ewels, double ro ller'

o SIZE

GHADE 983 Ihmting, bridge movt., 17 jewels, double roller

GHADE 912 Open face, }i piatemovt., ] 7 jewels. double roHar

GRADE 923 Open face, bridge movt., 23 jewels, double roller

t:I t:I It:::I 1::1 ~ t:I t:I

= 1:1 1:::1 1:1 1:1 1:1 1:1 1:1 C:a E:::a CI

:: 1;2

~


GHADE 936 Open face, ~:l pla wlllovt. , 17 Jewd s . donble roller

G H,\OE 98iA Open face, %' plat emo \' t., l7 jewels, dou ble roller

G RADE 980 Open face, %' plate move, 17 jewels, doub le roller

6/0 SIZE

C HADE 9a6A Open face. %' plate mov! .. 17 jewels. double folkr

GHADE 987S Hunting, %' plate movt" 17 jewels, double roller

14/0 SIZE

GRADE 982 Open face, :u plate movt .. 19 jewels, double rollcr

18/0 SIZE

G HADE 989 Opeo face. :u plate movt" 17 jewels, double roller

21/0 SIZE

G RADE 721 Open faCe. ~ plate movt . . 17 Jewels, double roll er

GRADE 995 Open face. ~ plate movt .. 17 jewels, double ro ll er'

GRADE 91L o pen face, % plate movt., J 7 jewels, double roller

GHADE 987 Hunting, ~ plate move, J 7 jewels, double roller

GHADE 979 I h mting, :u plate 1II0Vt. . 19 jewels, double roller

GRADE 982M O pen face, ~i plate movt" Hl jewels, double roller

20/0 SIZE

G HADE 997 Open face, :u plate movt .. 17 jewels, double roller

22/0 SIZE

CHAOE 911i\ 1 Open face, %' plate movt" 17 jewels, double ro ller

5

MOVEMENT ILLUSTRATIONS

When and as new H amilton movements are released plate illustrations on gummed paper will be furnished to paste on this page.

ALWAYS USE GEN UINE HAMILTO N MATERIAL

DESCRIPTION OF HAMILTON WATCH GRADES

18 SIZE 12 SIZE Grad~ Grlldfl

No. Dellcription No. De8cril~tion

924, O.F., Full plate movt., 17 jewels, S.R. 900, O.F., bridge movt. , 19 jewels, D.R. 925, Htg., 17 jewels, S.R. 902, O.F., bridge movt., 19 jewels, D.R. 926, O.F., 17 jewels, S.R. 904, O.F., bridge movt., 21 jewels, D.R. 927, Htg., 17 jewels, S.R. 910, O.F., %' plate movt., 17 jewels, D.R. 928, O.F., 15 jewels, S.R. 912, O.F., %' plate movt., 17 jewels, D.R. 929, Htg., 15 jewels, S.R. 914, O:F., %' plate movt., 17 jewels, D.R. 930, O.F., 16 jewels, S.R. 916, O.F., %' plate movt., 17 jewels, D.R. 931, Htg., 16 jewels, S.R. 918, O.F., %' plate movt., 19 jewels, D.R. 932, O.F., 16 jewels, S.R. 920, O.F., bridge movt., 23 jewels, D.R. '933, Htg., 16 jewels, S.R. 922, O.F., bridge movt., 23 jewels, D.R. 934, O.F., 17 jewels, S.R. 400, thin, O.F., bridge movt., 21 jewels, D.R. 935, Htg., 17 jewels, S.R. 10 SIZE 936, O.F., 17 jewels, S.R. and D.R. 937, Htg., 17 jewels, S.R. and D.R. 917, O.F., %' plate movt., 17 jewels, D.R. 938, O.F., 17 jewels, D.R. 921, O.F., bridge movt., 21 jewels, D.R. 939, Htg., 17 jewels, D.R. 923, O.F., bridge movt., 23 jewels, D.R. 940, O.F., 21 jewels, S.R. and D.R. o SIZE 941, Htg., 21 jewels, S.R. and D.R. 942, O.F., 21 jewels, D.R. 981, Htg., %' plate movt., 17 jewels, D.R. 943, Htg. , 21 jewels, D.R. 983, Htg., bridge movt., 17 jewels, D.R. 944, O.F., 19 jewels, D.R. 985, Htg., bridge movt., 19 jewels, D.R. 946, O.F., 23 jewels, D.R.

6/0 SIZE 948, O.F., 17 jewels, D.R.

16 SIZE 979, Htg., %' plate movt., 19 jewels, D.R. 986, O.F., %' plate movt., 17 jewels, D.R.

950, O.F., bridge movt., 23 jewels, D.R. 986A, O.F., %' plate movt., 17 jewels, D.R. 950B, O.F., bridge movt., 23 jewels, D.R. 987, Htg., %' plate movt., 17 jewels, D.R. 950E, O.F., bridge movt., 23 jewels, D.R. 987A, Htg., %' plate movt., 17 jewels, D.R. 952, O.F., bridge movt., 19 jewels, D.R. 987E, Htg., %' plate movt., 17 jewels, D.R. 954, O.F., %' plate movt., 17 jewels, D.R. 987F, Htg., %' plate mO'Vt., 17 jewels, D.R. 956, O.F., %' plate movt., 17 jewels, S.R. 987S, Htg., %' plate movt., 17 jewels, D.R. 960, O.F., bridge movt., 21 jewels, D.R. 988, O.F., %' plate movt., 17 jewels, D.R. 961, Htg., bridge movt., 21 jewels, D.R.

12/0 SIZE 962, O.F., bridge movt., 17 jewels, D.R. 963, Htg., bridge movt., 17 jewels, D.R. 4,01, O.F., %' plate movt., 19 jewels, D.R. 964, O.F., bridge movt., 17 jewels, S.R.

14/0 SIZE 965, Htg., bridge movt., 17 jewels, S.R. 966, O.F., %' plate movt., 17 jewels, D.R. 980, O.F., %' plate movt. , 17 jewels, D.R. 967, Htg., %' plate movt., 17 jewels, D.R. 980A, O.F., %' plate movt., 17 jewels, D.R. 968, O.F., %' plate movt., 17 jewels, S.R. 980B, O.F., %' plate movt., 17 jewels, D.R. 969, Htg., %' plate movt. , 17 jewels, S.R. 982, O.F., %' plate movt., 19 jewels, D.R. 970, O.F., %' plate movt., 21 jewels, D.R. 982M, O.F., %' plate movt., 19 jewels, D.R. 971, Htg., %' plate movt., 21 jewels, D.R.

18/0 SIZE 972, O.F., %' plate movt., 17 jewels, S.R. and D.R. 973, Htg., %' plate movt., 17 jewels, S.R. and D.R. 989, O.F., %' plate movt., 17 jewels, D.R. 974, O.F., %' plate movt., 17 jewels, S.R. and D.R. 989E, O.F., %' plate movt., 17 jewels, D.R. 975, Htg., %' plate movt., 17 jewels, S.R. 20/0 SIZE 976, O.F., %' plate movt., 16 jewels, S.R. 977, Htg. , %' plate movt., 16 jewels, S.R. 997, O.F., %' plate movt., 17 jewels, D.R. 978, O.F., %' plate movt., 17 jewels, D.R. 21/0 SIZE 990, O.F., %' plate movt., 21 jewels, D.R. 991, Htg., %' plate movt., 21 jewels, D.R. 721, O.F., %' plate movt., 17 jewels, D.R. 992, O.F., %' plate movt., 21 jewels, S.R. and D.R. 995, O.F., %' plate movt., 17 jewels, D.R. 992B O.F., %' plate movt., 21 jewels, D.R. 995A, O.F., %' plate movt., 17 jewels, D.R. 992E, O.F., %' plate movt., 21 jewels, D.R. 22/0 SIZE 993, Htg., %' plate movt., 21 jewels, D.R. 994, O.F., bridge movt., 21 jewels, D.R. 911, O.F., %' plate movt., 17 jewels, D.R. 996, O.F., %' plate movt., 19 jewels, D.R. 911M,O.F., %' plate movt., 17 jewels, D.R.

7

eo

~

DIAL SIDE

TYPICAL PARTS OF A HAMILTON MOVEMENT

lfWEL. cenler lower

SPRING, clulch lem

LEVER, selling

°0 LEVER, clulch

JEWEL, balance lower ~ PIN lSI, banking

JEwn. third and fourth lower -.J y ENDSTOHf CAP, balance lower -I ~

JEWEL lSI, escape and palJet lower

WHEElISI, seiling

Shown here in what are known as "exploded" views are all the parts of a typical Hamilton watch movement. The illustrations are based on a Hamilton 16 size watch. Except for obvious variations in size, shape, and certain parts peculiar to given models, the illustrations show typical Hamilton parts in a manner which suggest their assembly relationship. The illustrations will be of special interest to apprentices, junior watchmakers, and others who have recently joined the trade. Not only are typical parts shown in thirddimension and in t heir relative positions to one another, but they are identified by part names employed throughout t his catalog,

WHEEL, minute. complete wilh pinion

SPRING, selling cap

PINION. cannon

WHEEl, hour

~ ENDSTONE CAP, escape and pallet lower ~ ~ ~

tt'l ><1 ~ 0 1::1 tt'l 1::1

;::;l tt'l ~ [fj

0 "'l

> >-3 -< ::s ~ t"'

-D D B D D 12--D D· 0 '0 0- DOD D a a 'U' II- tl ·1l 0 [l a ·0 ~ -~ " ~ " ~ " " I" . Ua..1Ul; LLU U U L1 -- -

'"

TRAIN SIDE

SCREW, selling lever Ibluel

SPRING, dick

WHEEl, /awer winding

BRIDGE, barrel

MAINSPRING

BARREL

WHEEL, fourth and pinion

ARBOR, bar,,1

,~'"

PINION, winding 1,

CLUTCH~

~' ,~~, ~,..,..-'" , ,

.y LVI""" '"'" ., ".. ~ L JEWEl, cenler upper .. ~ ~

JEWEL, Ihird upper (~~ r STAff, b.lance

l ROLLER, large, and jewel pin ~ ROLLER, sm, 1I WHEEL, winding

COCK, b.lance

JfWEL. balance upper

SPRING, regUI'lor~ SCREW, regulating, micrornetric ~

REGULATOR l ..,& • /fir •

CAP .. balance upper endslone -, /

'" ENDSTONE, b.lance upper I M/ / l(~'

SPRING, h.ir

~ ~1 ~ ~

a.. II>

d 'Ie h~

WHEEl, balance

,4' I //

./(1/ ~L /' e ~ /' r;p ~ ~ ARBOR, p.llel

~ PALlET AND fORK WITH ST

, 'I L BRIDGE. p.llel /

JEWEl, p.llel upper ,

ENDSTONE CAP, p.llel upper,~ l' ~ / WHEEl, ""p. I PIN 10M, escape

./

/~~~ BRIDGE, lra in , 1 L JEWEL, fourlh upper

·JEWEL, escape upper

ENDSTONE CAP, esc.pe upper

s: = ~ o ~

~ >-3 r"'J =: ~

~ t'l ~ t'l ~ >-3

MATERIALS DIFFICULT TO IDENTIFY

Setting Cap Springs

Because the conventional parts of a watch are readily identified by watch repairmen, the parts illustrations employed in previous catalogs have been eliminated. Replacing the previous illustrations are the-difficultto-identify parts shown on these pages. These parts -setting levers- setting cap springs- and click springs are shown five times actual size. Beneath each illustration is the catalog number of the part, the size watch in which it is employed, and the specific grade numbers in which it is used. Material identification problems not covered by illustrations can be solved by sending the actual part and the grade and serial number of the model from which it was removed to your Hamilton Material Wholesaler or the Material Sales Department, Hamilton Watch Company, Lancaster, Pennsylvania.

©

CAT. NO. 25I3A 6/ 0 Size Grade Mo.-981A

©

CAT. HO. 6039 10 Size Grade M •. -923

CAT. HO. 5099 14/ 0 Size Grade Mos.-980. 981, 9808, 981M

©

CAT. HO. 2940 11 / 0 Size

CAT. HO. 658 16 Size

©

Grade Nos.-9918, 9508

©

CAT. NO. 6040 10 Size Grade Mos.-911, 911

Grade Kos.-995, 995A, 991, III

CAT. HO. 6240 22/0 Size Grade Kos.-911, 911M

ALWAYS USE GENUINE HAMILTON MATERIAL

MATERIALS DIFFICULT TO IDENTIFY

0

CAT. HO. 6022 10 Size Grade Nos.-917, 921, 923

~ CAT. HO. 5022 14/ 0 Size 6rade Nos.-980, 980A, 9808, 982, 982M

CAT. HO, 50 18 Size Grade Nos.-AII Grades

CAT. HO. 1241 J 2 Size Grade Nos.- 910, 914, 900, 920

CAT. HO. 1920 6/ 0 Size Grade Nos.-986, 988

Setting Levers

~ ~ ~ CAT. HO. 2422 CAT. MO. 2522 CAT. HO. 25221 6/0 Size 6/ 0 Size 6/0 Size Grade Nos.-986, 9861 Grade Nos.-987, 987E, 987F, 979, 979F Grade No.-987A

~ 0 CAT. HO. 2722 CAT. HO. 2!22 18 /0 Size 20/ 0-21 / 0 Sizes Grade Nos.-989, 989E Grade Nos.-995, 995A, 997, 721

Click Springs

CAT. HO. 331 t 6 Size Grade Nos.- AII Grades, "cep1 992B, 950B

CAT. HO. 2320 6/0, 18/0, 14 / 0 Sizes

CAT. MO. 3041 121 Size Grade Nos.-912, 916, 922, 902, 904, 918

CAT. HO. 2920 20/ 0-21 / 0 Sizes

~ CAT. HO. 6222 22/ 0 Size Grade Nos.-911, 911 M

CAT. HO. 655 16 Size Grade Nos.-992B, 950B

CAT. MO. 6020 10 Size Grade Nos.-917, 921, 923

G CAT. MO. 6220 22/ 0 Size

Grade Nos.-9861, 987, 98lE, 987F, 9871, 980, 982, 982M, 980A, 980B, 989, 989E, 979, 979F

Grade Nos.-995, 995A, 997, 721 Grade Nos.-911, 911 M


11

SERIAL NUMBERS AND GRADES

No. Grade No. Grade No. Grade No. Grade No. Grade 1-20 936 3200 1-300 926 58101-200 974 77701-900 975 121001-500 941 21-30 932 32301·700 930 58201 -300 972 77901-78000 977 121501-122000 943 31-60 936 32701-33000 934 58301-400 966 78001-500 970 122001-300 940 61-400 932 33001-500 931 58401-500 976 78501-700 972 122301-400 942 401-1000 936 33501-SOD 927 58501-600 972 78701-900 974 122401-1 23000 940 1001-20 937 33801-34000 935 58601-800 974 78901-79000 976 123001-124000 941 1021-30 933 34001-500 928 58801-59000 976 79001-100 973 124001-100 942 1031-60 937 34501-700 930 59001-300 973 79101-300 975 124101-800 940 1061- 1100 933 34701-800 926 59301-500 967 79301-700 977 12480 1-125000 942 1101-300 937 34801-35000 934 59501-700 975 79701-900 975 125001-126000 927 1301-600 933 35001-800 931 59701-60000 977 79901-80000 973 126001-127000 924 1601-2000 937 35801-36000 935 60001-500 976 80001-200 972 127001-128000 941 2001-3000 7J 36001-37000 92. 60501·700 974 80201-400 974 128001-129000 936 3001-100 931 37001-38000 929 60701-61000 976 80401-600 970 129001-130000 925 3 101-500 935 3S001-500 926 61001-200 975 80601-700 972 130001-500 924 3501-600 931 3S501-600 930 61201-500 977 80701 -900 974 130501-131000 926 3601 -900 93. 38601-900 934 61501-600 973 8090 1-8 1000 976 131001-132000 925 3901 -4000 931 38901-39000 926 61601-800 97. 81001-300 961 132001-100 926 4001-300 930 39001-200 931 61801-62000 977 8 1301-500 96. 132101-200 934 4301-5100 934 39201-500 935 62001-100 972 81501-82000 961 132201-500 926 5101-400 926 39501-700 927 62101-300 974 82001-300 972 132501-133000 924 5401-600 934 39701-900 935 62301-500 976 82301-500 974 133001-134000 937 5601-6000 930 39901-40000 931 6250 1-700 974 82501-600 970 134001-135000 924 6001-600 936 40001-200 930 62701-900 972 82601-700 972 13500 1-136000 925 6601-700 938 40201-500 934 62901-63000 974 82701-800 974 136001-137000 926 6701-800 936 40501-41000 926 63001-500 977 82801-900 968 137001-100 llJ 6801-7000 932 41001-500 929 63501-600 975 82901-83000 976 137101-13 8000 927 7001-10 17J 41501-42000 927 6360 1-800 977 83001-400 977 138001-139000 940 7011-600 937 42001 -43000 999 63801-900 975 83401-500 971 139001-140000 937 7601-700 939 43001-300 941 6390 1-64000 973 8350 1-700 975 140001-300 938 7701-800 937 43301-500 943 64001-100 976 83701-800 973 140301-141000 942 7801-8000 933 43501-700 937 64101-200 972 8380 1-900 975 141001-142000 941 8001-700 936 43701-900 941 64201-300 974 83901-84000 969 142001-143000 940 8701-800 938 43901-44000 943 64301-600 972 84001-400 974 143001-100 927 8801-9000 936 44001-02 21J 64601-700 976 84401-500 970 143101-144000 925 9001·300 937 44003-400 938 64701-900 974 84501-700 972 144001-145000 924 9301-600 939 44401-500 942 64901-65000 976 84 701-800 968 145001-146000 925 9601-800 937 4450145000 936 65001-200 973 8480 1-85000 976 146001-400 934 9801-900 933 45001-46000 929 65201-300 977 85001-200 937 146401-147000 924 990 1-10000 939 46001-500 926 65301-400 97. 85201-900 941 147001-148000 927 10001-200 938 46501-800 934 65401-500 973 85901 -86000 943 148001-149000 940 10201-400 936 46801-47000 930 65501-700 977 86001-87000 928 149001-150000 92' 10401-50 932 47001-500 927 65701-900 975 87001-88000 929 150001-151000 924 10451-500 936 47501-700 935 6590 1-66000 977 8800 1-500 926 151001-400 927 10501-700 938 47701-48000 931 66001-200 976 88501-89000 930 151401-500 935 10701-900 93. 48001-05 942 66201-300 974 89001-500 941 151501-152000 927 10901-11000 938 48006-300 940 66301-500 972 89501-90000 937 152001-153000 93. 11001-12000 93. 48301-500 942 66501-600 976 90001-100 926 153001-154000 911 12001-200 939 4 850 1-900 940 66601-700 974 90101-950 999 154001-155000 936 12201-13000 937 48901-49000 942 66701-800 972 91001-92000 925 155001-156000 927 13001-400 999 49001-400 927 66801-67000 074 92001-200 940 156001-157000 940 13401-14000 938 49401-900 925 6700 1-100 977 92201-93000 936 157001-158000 925 14001-15000 999 49901-50 llJ 67101-300 975 93001-94000 927 158001-150000 940 15001-300 939 50071-500 962 67301-600 973 94001-003 934 159001-160000 941 1530 1-15401 21J 50501-750 960 67601-800 975 94004-95000 92' 160001-161000 940 15302-700 937 50751-50850 964 6780 1-68000 977 95001-96000 923 161001-162000 941 1570 1-16000 939 50851-51000 960 68001-800 960 96001 - 100 942 162001-163000 926 16001-100 931 51001-51300 16, 68801-69000 964 96101-700 940 163001-164000 943 16101-200 930 51301-400 963 69001-100 977 96701-97000 93. 164001-165000 940 16201 -300 927 51401-650 961 6910 1-200 975 97001-900 929 165001-166000 92' 16301-400 931 51651-750 965 6920 1-400 973 97901-98000 927 166001-167000 924 1640 1-600 927 51751-52000 961 69401-600 975 98001-99000 924 167001-168000 927 16601 - 17000 931 52001-300 16, 69601-70000 977 9900 1-100000 925 168001-169000 940 17001-500 929 52301-500 976 70001-200 976 100001-101000 924 169001-400 935 17501-18000 931 52501-700 974 7020 1-400 970 10 1001-102000 925 16MOI-17oooo 927 18001-200 928 52701-800 966 70401-600 968 102001-103000 922 170001-171000 999 18201-300 92. 52801-53000 976 7060 1-900 972 103001-104000 927 171001-172000 925 18301-500 928 53001-53070 16, 70901-71000 974 104001-105000 940 172001-100 934 18501-19500 930 53071-53500 977 71001-200 975 105001-500 925 172101-173000 926 19501-700 926 53501-900 975 7120 1-500 971 105501-106000 927 173001-174000 925 19701-20000 930 53901-54000 967 71501-700 975 106001-107000 940 174001-175000 924 20001-300 934 54001-200 972 71701-90 973 107001-400 941 175002-176000 HWW* 20301-500 926 5420 1-300 974 71791-800 969 107401-500 943 175001-699 HWW* 20501-21000 999 5430 1-500 976 71801-900 977 107501-800 941 176001-177000 940 21001-300 935 54501-700 974 71901-72000 975 107801-108000 943 177001-178000 927 21301-500 927 54701-800 968 72001 -100 974 108001-200 928 178001-179000 942 21501 -800 935 54801 -55000 976 72101-300 976 108201-109000 926 179001-500 93. 21801 -22500 927 55001-300 973 72301-600 974 109001-500 927 179501-180000 927 22501-800 931 55301-600 977 72601-700 968 109501-110000 925 180001-181000 940 22801-23000 935 55601-700 969 72701-900 976 110001-900 940 181001-182000 941 23001-200 928 55701-800 977 72901-73000 972 110901-111000 942 182001-300 926 23201-500 7J 55801-56000 975 73001-200 975 l11oo1-5DO 937 182301--400 934 24001-500 92. 56001-300 974 73201-300 973 111501-112000 941 182401-183000 92. 24501-25000 934 56301 -500 976 73301-74000 977 112001-200 928 183001-184000 941 25001-100 llJ 56501-600 966 74001-400 974 112201-113000 926 184001-185000 940 25101-400 927 56601-800 972 74401-600 972 11 3001-114000 92. 185001-186000 925 25401-800 931 56801-900 974 74601-75000 976 114001-003 940 186001-187000 942 25801-26000 935 5690 1-57000 97. 75001-76799 HWW* 114004-1 15000 936 187001-188000 927 26001-500 930 57001-300 977 76002-76800 HWW* 115001-116000 927 188001-189000 924 26501-27000 928 57301-500 975 77001-100 969 116001-117000 940 189001-190000 925 27001-28000 929 57501-600 973 77101-300 973 117oo1-118000 925 190001-191000 926 28001-29000 999 57601 -800 975 77301-500 975 118001-119000 999 191001-192000 927 29001-800 927 57801-58000 977 77501-600 971 119001-120000 92. 192001-1 93000 924 29801-30000 93. 58001-100 972 77601-700 973 120001-121000 924 193001-194000 925

*Haydn W. Wheeler model

12

SERIAL NUMBERS AND GRADES a No. Grade No. Grade No. Grade No. Grade No. Grade

194001·195000 926 275002-100 nww* 317601-700 969 355001-800 975 404001-405000 926 195001-500 935 275102-200 HWW* 317701-318000 973 35580 1-900 973 405001-406000 924 195501-196000 927 275202-460 H\V\V* 318001-100 972 355!)Ol·356000 993 406001-407000 940 196001-197000 926 275462-500 HWW· 318101-900 974 356001-500 990 407001-408000 926 197001-198000 937 276001-277000 940 318901-319000 970 356501-357000 974 408001-416000 940 198001-199000 936 277001-278000 941 319001-100 971 357001-358000 975 416001-417000 926 199001-200000 925 278001-279000 940 319101-320000 975 358001-359000 974 417001-41 8000 940 200001·201000 926 279001-280000 925 320001-300 972 359001-360000 975 418001-419000 926 20lCiOI-202000 925 280001-28 1000 936 320301-400 968 360001-550 960 419001-420000 941 202001-500 926 281001-282000 927 320401-321000 974 360801-361000 960 420001-421000 940 202501-203000 934 282001-283000 92. 321001-200 973 361001·100 993 421001·422000 926 203001-204000 927 283001·284000 925 321201·322000 975 361101·300 991 422001-423000 924 204001·100 934 284001·500 934 322001·323000 974 361301-400 993 423001-425000 926 204101-500 926 284501·900 924 323001 -700 975 361401 -700 975 425001·426000 924 204501-205000 934 284901-285000 999 323701-324000 973 3"1701-20 973 426001-500 936 205001·206000 941 285001-286000 925 324001-325000 960 361721-362000 975 426501-427000 944 206001-207000 940 286001-287000 940 325001-100 965 362001-900 974 427001-428000 924 207001·208000 927 287001-288000 927 325101-326000 961 362901-363000 990 428001-429000 926 208001-900 999 288001-289000 940 326001-327000 974 363001-364000 975 429001·430000 925 208901·209000 940 289001-290000 927 327001·300 971 36400 1·365000 974 430001-431000 924 209001-210000 925 290001·800 936 327301-500 973 365001-100 975 431001·432000 925 210001-211000 940 290801·291000 938 327501·328000 975 365101·300 973 432001·433000 940 211001-212000 927 291001-292000 925 328001-300 992 365301-366000 975 433001-434000 924 212001-213000 940 292001-500 940 328301-500 990 366001-367000 974 434001-500 940 213001-500 941 292501·293000 942 328501-329000 992 367001-500 975 434501-600 942 213501-600 937 293001-294000 925 320001-330000 975 367501-368000 993 434601-435000 946 213601-214000 925 294001-295000 926 330001-100 992 368001 -369000 974 435001-436000 924 214001-215000 92' 295001-296000 927 330101-500 990 369001-370000 992 43600 1-438500 940 215001-216000 927 296001 -297000 940 330501 -33 1000 992 370001 -100 990 43850 1-800 946 216001·217000 940 297001-298000 927 331001-200 973 370101-400 992 43880 1-900 942 217001-2 18000 927 298001-299000 940 33 1201-400 975 370401-500 974 438901-440000 946 218001-219000 940 29900 1-300000 92. 331401-.500 969 370501-800 990 440001-441000 924 219001-220000 925 300001-300 972 331501-700 971 370801-371400 992 441001-442000 940 220001-221000 924 300301-500 970 33 1701-800 973 371401-500 972 442001-400 946 22100 1-222000 927 300501-900 974 331801-332000 975 371501-373500 974 442401-500 942 222001-223000 926 300901-301000 968 332001-200 992 373501 -700 990 442501-443000 946 223001-02 927 301001-400 975 332201-800 972 373701-374000 992 443001-444000 926 223003-04- 941 301401-500 971 332801-333000 974 374001-200 974 444001-445000 924 223005 937 301501-302000 973 333001-500 975 3 74201 -700 990 445001-446000 927 223006-224000 927 302001-100 990 333501-700 971 374701-375000 974 446001-447000 924 224001-225000 924 302101-200 992 333701-900 973 3 75001·100 993 447001-448000 925 225001-226000 927 302201-300 990 333001-334000 975 375101·500 991 448001-449000 926 226001-227000 940 302301-900 992 334001-200 972 375501-376000 975 449001-450000 924 227001-228000 925 302901-303000 990 334201-800 992 376001-200 972 450001-451000 926 228001-229000 924 303001-100 973 334801-335000 990 3 76201-500 974 45 1001-452000 925 229001-230000 925 303101-300 971 335001-600 975 376501 -377000 992 452001-453000 940 230001-500 926 303301-BOO 975 335601-800 971 377001-200 973 453001-454000 924 230501-231000 924 303801-304000 973 335801-900 973 377201-378000 975 454001-456000 940 231001-565 937 304001-1 00 970 335901-336000 975 378001-379000 974 456001-457000 999 231566-232000 927 304101-400 972 336001-200 972 37900 1-380 800 992 457001-458000 940 232001-233000 940 304401-305000 974 336201·337000 97' 380801-38 1000 990 458001-459000 999 233001-234000 941 305001-100 973 337001-338000 975 381001 -382000 992 459001-110 946 234001-235000 940 305101-200 971 338001-200 974 3 82001-100 990 459111-118 942 235001-236000 941 305201-300 969 338201-900 992 382101-383000 974 459119-200 946 236001-237000 936 305301-900 975 338901-339000 990 383001-300 992 459201-700 942 237001-238000 941 305901-306000 973 330001·300 971 38330t -700 990 459701-460000 946 238001-239000 926 306001-400 972 339301-500 973 383701-384000 972 46000 1-461900 940 239001-500 943 306401-307000 974 339501-340000 975 384001 -700 974 461901-462000 940 239501-240000 941 307001-100 975 340001-200 974 3 84701-900 972 462001-463000 999 240001-241000 940 307101-300 971 340201-300 972 384901 -385000 974 463001-500 940 241001-242000 941 307301-400 975 340301-600 970 385001-600 9 72 463501-464000 940 242001-243000 940 307401-500 973 340601-341000 974 385601 -800 974 464001-466000 926 243001-244000 927 307501-600 975 34 1001-200 973 385801-386000 990 466001-467000 924 244001-245000 936 307601-700 971 341201-342000 975 386001-800 974 467001-468000 926 245001-246000 925 307701-900 975 342001-300 990 386801-900 992 468001-469000 940 246001-247000 940 307901-308000 969 34.2301-343000 992 386901-387000 972 469001-470000 924 247001-248000 927 308001-700 990 343001-344000 975 387001·100 990 470001-471000 926 248001-240000 940 308701-309000 992 344001-200 970 387101-900 992 471001-472000 946 249001-250000 927 309001-100 971 344201-400 972 387901 -388000 972 472001-473000 924 250001-251000 926 309101-400 973 344401-345000 974 388001-400 990 473001-474000 940 251001-252000 927 309401-310000 975 345001-346000 975 388401-389000 992 474001-475000 924 252001-253000 924 310001-400 970 346001-300 992 389001-391000 97. 475001-476000 940 253001-254000 925 310401-311000 974 346301-347000 97' 391001-300 972 476001-477000 924 254001-255000 940 311001-700 975 347001-180 993 391301 -392000 974 477001-478000 940 255001-256000 925 3 11701-31 2000 973 347181·200 991 392001-800 992 478001-479000 926 256001-257000 926 312001-200 970 347201-300 975 39280 1-393000 990 479001-480000 944 257001-258000 941 312201-500 972 347301-400 973 393001-400 075 480001-481000 926 258001-259000 924 312501-600 968 347401-700 993 393401-600 973 481001-482000 927 259001-260000 941 312601-313000 97. 347701-900 991 393601-394000 993 482001-483000 924 260001-261000 940 313001-100 973 347901-348000 973 394001-200 972 483001-484000 926 261001-262000 927 313101-400 971 348001-200 970 394201-395000 974 484001-485000 940 262001-263000 926 313401-600 969 34 8201-800 974 395001-100 993 485001-486000 925 263001-264000 925 313601-314000 975 348801-349000 972 395101-900 991 486001-487000 999 264001 -265000 940 3 14001 -600 97. 349001-350000 975 395901-396000 993 487001-488000 92. 265001-266000 927 314601-900 972 350001-300 990 396001-397000 992 488001-489000 999 266001-267000 940 3 14001-31 5000 970 350301-400 974 397001-200 990 489001-492000 924 267001-268000 925 3 15001·100 971 350401-600 990 397201-398000 992 492001-493000 940 268001-269000 940 315101-400 973 350601-351000 992 398001-200 972 493001-494000 946 269001-270000 927 315401-316000 975 351001-352000 975 398201-399000 992 494001-495000 944 270001-271000 940 316001-200 992 352001-100 968 399001-600 993 495001-496000 940 271001-272000 925 3 16201-300 972 352101-353000 974 399601-400000 975 496001-497000 925 27200 1-273000 926 316301-500 992 35300 1-354000 975 400001-401000 924 497001-498000 999 273001-274000 941 316501-317000 972 354001-400 992 401001-402000 940 498001-499000 936 274001-275000 924 317001-600 975 354401-355000 974 402001-404000 924 499001-501000 940

"'Haydn W. Wheeler model

,.


No. Grade No. Grade No. Grade No. Grade No, Grade

501001·900 026 B625001-626000 999 Ball 717201-718000 975L 776701-777000 975 836901-837000 974P 501901-502000 934 626001-627000 02. 718001-721500 974 777001 --300 972 837001-838000 975P 502001-503000 926 B626001 -627000 999 Ball 721501-722000 992 777301-778300 974 838001-839000 975L 503001-504000 999 627001-628000 924 722001-724000 974 778301-800 992 839001-400 974L 504001-507000 940 B627001-628000 999 Ball 724001-725000 972 778801-900 972 8394Q I ·7()() 992L 507001-508000 999 628001-630 800 925 725001-726000 97' 778901-779300 974 839701-840000 990L 508001-509900 940 B628001-630800 999 Ball 726001-727000 992 779301-780100 992 840001-400 952L 509901-510000 942 631001-63GOOO 940 727001-728000 07' 780101-300 972 840401-900 950L 510001-511500 940 B631001-636000 999 Ball 728001-72900D 902 780301-78 1300 002 840901·841000 952L 511501-700 942 630001-637000 9" 729001-730000 975 78 1301-400 972 841001-842000 975P 511701-517000 940 B63600 1-637000 999 Ball 730001-731000 992 78 140 1-500 074 842001-843000 974L 517001·519000 024 637001-638000 936 731001-732000 975 781501-782000 992 843001-844000 974P 519001-521000 925 B637001-638000 999 Ball 732001-734000 902 782001-783000 975 844001-200 993 521001-523000 944 63800 1-639000 926 734001-735000 975 783001-600 092 844201-845000 975 523001-524000 946 B038001-639000 999 Ball'- 735001-736000 974 783601-784000 974 845001-200 992 524001-531000 940 63900 1-640000 925 736001-738000 975 784001 -785000 992 845201-400 972 531001-532000 926 B639OO1-6400oo 999 Ball 738001-739000 974 785001-500 952 845401-700 954 532001-10 93. 640001-642000 924 739001-740000 975 785501-786000 950 845701-846000 972 532011-533000 926 B6400Ql..()44400 999 Ball 740001 -100 97. 786001-787000 992 846001-500 952 533001-535500 999 644401-645000 940 740101-200 972 787001 -400 974 846501-847000 950 535501-536000 940 645001-645500 027 740201-900 974 787401-788000 972 847001-200 972 536001-537000 936 B645001-645500 999 Ball 740901-741000 975 788001 -791300 992 847201-849000 974 537001-538000 924 64550 1-64 6000 925 741001-742000 992 791301-792600 974 849001-850000 975 53800 1-543000 940 B645501-646000 999 BaU 742001-743000 974 792601-900 972 850001-300 992 543001-544000 927 64600 1-647000 926 743001-300 975 792901-793700 992 850301-800 990 544001-200 934 B646OO1-647000 999 Ball 743301-400 993 793701-900 990 850801-851000 972 544201-545000 926 647001-64 8000 940 743401-744000 975 793901-794000 992 851001-400 993 545001-546000 925 B647001 -648000 999 Ball 744001-500 974 794001-200 972 851401-852000 975 546001-547000 924 648001-649000 940 744501-745000 902 794201-795000 974 852001-853000 992 547001-548000 026 B64800 1-649000 998 Dall 745001-747000 975 795001-796400 992 85300 1-854000 974 548001-549000 999 B649001-650000 998 Ball 747001-700 974 796401-800 972 854001-600 950 549001-551000 046 B65000 1-651 000 999 Ball 747701-748000 972 796801-797200 074 854601-900 952 551001-553000 944 651001-652000 940 748001-749500 992 797201-500 954 854901-855100 960L 553001-555000 940 B651001-652oo0 998 Ball 749501-750000 974 797501-798000 074 855101-856000 950L 555001-556000 93. 652001-652700 924 750001-100 961 798001-500 990 856001-857840 975 556001-558000 924 B652001-652700 998 Ball 750101-200 961 798501 -800 972 857841-858000 975L 558001-560000 925 652701-652800 924 750201-700 OSO 798801-799000 97. 858001-500 97' 56000 1-561 000 999 652801-652900 927 750701-751000 952 799001-200 954 858501-859000 972 561001-562000 926 652901-653000 937 751001-752000 960 799201-600 992 859001-860000 974 562001-564000 92. 653001-655000 940 752001-500 952 799601-800000 954 860001-862300 992 564001-565000 926 B653001-6b5000 999 Ball 752501-753000 950 800001 -802000 974 862301-400 954 565001-568000 940 655001-655200 924 753001-500 952 802001-200 954 862401-500 972 668001-569000 936 B655001-655200 999 Ball 753501-754000 950 802201-2 972 862501-600 95' 569001-571000 924 655201-656000 92' 754001-100 960 802203-300 954 862601-800 972 571001-576000 940 656001-657000 926 754101-500 952 802301-500 972 862801-863000 974 576001-200 942 657001-659000 927 754501-755000 960 802501-803700 974 863001-864000 992 576201-578000 940 659001-660000 925 755001-400 992 803701-804200 954 864001-865000 .75 578001-580000 924 660001-661000 027 755401-500 074 804201-806000 974 865001-866000 992 580001-582000 926 661001-662000 924 755501-700 972 806001-807000 975 866001-600 974 582001-584000 925 662001-664000 940 755701-900 974 807001-500 993 866601-700 954 584001-585000 927 66400 1-666000 924 755901 -756000 972 807501-808800 975 866701-867000 972 585001-587000 099 666001-667000 940 756001-757000 974 80880 1-809000 993 867001-868000 975 587001-592000 940 667001-668000 941 757001-300 975 809001-500 97' 868001-869000 992 592001-593000 926 668001-669000 926 757301-500 993 809501-600 972 869001-870000 975 593001-594000 92. 669001-670000 999 757501-758000 975 809601-810000 974 870001-872000 992 594001-601000 940 670001-100 937 758001-100 972 810001-300 990 872001-200 993 B6oooo1-601000 999 Ball 670501-673000 925 758101 -759000 992 810301-812000 074 8/2201-874000 975 60 1001-60 1800 926 673001-675000 92. 759001-760000 975 8 12001 -700 992 874001-800 97. B601oo1-601 SOO 999 Ball 675001-677000 940 760001-400 992 812701-813000 974 874801-875000 975 601801-602000 934 677001-678000 924 760401-600 972 813001-814000 974P 875001-300 052 B601801-602000 999 Ball 678001-679200 927 760601-800 974 814001-800 974L 875301-876000 975 602001-603000 926 679201-680000 926 760801-761000 992 814801-8 15900 902 876001-600 993 B602oo1-603000 999 Ball 68000 1-685000 024 761001-400 975 815901-816000 974L 876601-877000 975 60300 1-604000 926 685001-687000 940 761401-600 903 8 16001-8 17000 974P 877001-400 992 B603001-604ooo 999 Ball 687001-688000 925 761601-762000 975 8 17001-819000 974L 877401-700 975 604001-605000 926 688001-689000 046 762001-200. 992 819001-820000 974P 877701-878000 993 B604001-605000 999 Ball 689001-694000 940 762201-300 972 820001-821500 974L 878001-879400 975 605001-606000 925 694.001-696000 924 762301-763000 97' 821501-822000 990L 880001-600 992 B605001-606000 999 Ball 696001-697000 941 763001-300 903 822001-700 992L 880601-882400 97. 606001-607000 925 697001 -700000 024 763301-600 973 822701-823000 974L 882401-8834.00 992 D606001-607000 999 Ball 700001-702000 97. 763601 -764000 975 823001-824000 974P 883401-884100 97' 607001·608000 925 702001-703800 992 764001-300 992 824.001-826000 975P 884101-885300 992 B607001-608000 999 Ball 703801-704.000 900 764301-400 972 826001-500 975L 885301-886000 974 608001-613000 924 704001-400 992 764401-765000 974 826501-827000 903 886001-887000 992 B608001-613000 999 Ball 704401-705000 900 765001-300 992 827001-828000 975P 887001-300 974 613001-614000 925 705001-700 972 765301·767000 974 828001-829000 974L 887301-890300 902 B613OO1-6140oo 999 Ball 705701-706000 07. 767001-600 992 829001-830000 974P 800301-891000 974 614001-616500 924 706001-707000 900 767601-800 972 830001-500 990L 891001-600 992 B614001-6165OO 999 Ball 707001-800 972 767801-768000 974 830501-831000 992L 891601-892200 978 616501-617000 934 707801-708000 990 768001-769000 975 831001-100 954P 892201-896200 992 B616501-617000 999 Ball 708001-709500 975 769001-700 992 831101-200 972P 896201-897800 974 617001-619000 926 709501-710000 973 769701-770000 972 831201-500 954P 897801-898000 972 B617oo1 -61 9OOO 999 BaU 710001-800 993 770001-100 974 831501-832000 974P 898001-899100 992 610001-620000 927 710801-711000 991 770101-771200 992 832001-400 974L 899101-500 978 B619OO1-62ooo0 999 Ball 711001-300 973 771201-400 972 832401·833000 992L 899501-900000 974 620001-622"/00 940 711301-712000 975 771401-772000 974 833001-834000 990L 90000 1-902000 940 B620001-622700 999 Ball 712001-600 993 772001-773000 975 834001-600 974P 902001-904000 926 622701-623000 942 712601-713000 99 1 773001-800 992 834601-800 974L 904001-906000 924 D622701-623000 999 Ball 713001-714900 975 773801-774000 972 834801-835000 974P 906001-914000 940 623001-624000 941 714901-715000 091 774001-775000 975 835001-600 992L 914001-916000 .26 B623001-6240Q0 999 Ball 715001-716000 993 775001 -500 952 835601-800 990L 916001-917000 927 624001-625000 936 716001-100 972 775501 -776000 950 835801-836000 974L 917001-919000 925 B624oo1-6250oo 999 Ball 716101-717000 974 776001-300 973 836001-500 974P 919001-921000 940 625001-626000 925 717001 -200 991 776301-700 993 836501-900 954P 921001-923000 92.

14


No. Grade No. Grade No. Grade No. Grade No. Grade

923001-500 999 1052001-500 972P 1155001-200 994P 1270001-1Z71700 956P 1356001-1357000 974P 923501-924000 925 1052501-900 954 1155201-500 994L 1271701-1272000 974P 1357001-1359800 992L 924001-926000 940 1052901-1053000 97. 1156001-1158000 990L 1272001-1274000 996L 1359801- 1361000 99.L 926001-100 927 1053001-1054000 992 1158001-1160000 974P 1274001-500 993L 1361001-1362000 992L 927001·929000 926 1054001-1056000 974 1160001-1162000 992L 1274501-700 992L 1362001-600 974P 929001-933000 92' 1056001-1057000 975 1162001-500 99aL 1274701-1275000 992L 1362601-1363000 950P 933001-935000 925 1057001-1061300 992 1162501-1 164000 992L 1275001-1276000 972L 1363001-1364000 992L 935001-937000 926 1061301-1062300 972 116400 1-1166000 974P 1276001-1277000 974L 1364001-1365000 975P 937001-939000 940 1062301-1066000 992 1166001-1167000 974L 1277001-1278000 992L 1365001-800 956P 939001-941000 924 1066001-1068000 97. 1167001-1168000 956P 1278001-1279000 975P 1365801-1367000 974P 941001 -944000 940 1068001-1069000 975 1168001- 1169000 975P 1279001-1280000 974P 1367001-1369400 992L 944001-949000 926 1069001-1070000 974 1169001-1170000 974P 1280001-1281000 992L 1369401-1370000 996L 949001-952000 925 1070001-1071000 992L 1170001-1174000 956P 1281001-800 974P 1370001-1371000 974L 952001-958000 924 1071001-1073000 975P 1174001-1176000 974P 1281801-1282000 956P 1371001-600 996L 958001-960000 926 1073001-1075000 992 1176001-1177000 992L 1282001-1284000 996L 1371601-1373000 992L 960001-968000 940 1075001-1076200 974L 1177001-1178000 956P 1284001-1285000 992L 1373001-1374000 975P 968001-970000 92. 1076201-700 972L 1178001-1179000 974P 1285001-1286000 956P 1374001-1375000 992L 970001-971700 92. 1076701 -1077000 978L 1179001- 118 1000 996L 1286001-1288000 978L 1375001-1376000 950L 971701-972000 948 1077001-1079000 974P 118 1001-1182000 992L 1288001-500 993L 1376001-1377000 992L 972001 -973000 92. 1079001-1080000 992L 1182001-11 83000 996L 1288501-1289100 992L 1377001- 1378300 974P 973001-974000 93. 108000 1-1 00 952L 1183001-1184400 974P 1289101-700 MOL 1378301-1379000 956P 974001-975400 92. 1080101-200 960L 1184401- 1185400 956P 1289701-1290000 992L 1379001-1380200 972L 975401-25 Spec. 926 . 1080201-400 994L 1185401-1186000 974P 1290001-1291500 974P 1380201-1381000 978L 975426-976000 924 1080401-1081000 950L 1186001-1187000 992L 1291501-1292000 992P 1381001-500 956P 976001-979000 940 1081001-1082000 978L 1187001-1188000 996L 1292001-1297000 992L 1381501-1383000 974P 979001-100 942 1082001-400 993L 1188001-1 189000 992L 1297001-1298000 974P 1383001-1384000 992L 979101-981000 940 1082401-1083000 973L 1189001-1190000 974P 1298001-1299000 992L 1384001-1386100 974P 981001-982000 948 1083001-1084000 990L 1190001-1192000 990L 1299001-1300000 975P 1386101-1387000 956P 982001-984000 924 1084001-1085000 992L 1192001- 1193000 975P 1300001-1301000 9NP 1387001-1388000 992L 984001-986000 940 108500 1-1 086000 992L 1193001-1194000 974P 1301001-1302000 974L 1388001-400 978L 986001-987000 946 1086001-1088000 974P 1194001-1195000 956P 1302001-500 992L 1388401-1389000 978L 987001-988000 93. 1088001-1091000 992L 1195001-1196000 974P 1302501-1303000 990L 1389001-300 956P 988001-992000 940 1091001-200 978L ·1196001-1199000 992L 1303001-500 972L 1389301-1390000 956P 992001-996000 92. 1091201-1092000 974L 1199001-1201000 974P 1303501-1304000 972P 1390001-1391000 992L 996001-999998 940 1092001-1093000 992L 1201001-1202000 975P 1304001-1305000 978L 1391001-500 9.56P 999999-1000000 9'7 1093001-1095000 974P 1202001-1203000 M2L 1305001-1306000 956P 1391501-1392000 974P 1000001-1000300 972 1095001-1096000 992P 1203001-1204000 974P 1306001-1307000 974P 1392001-1393000 992L 1000301-1003000 992 1096001-400 974.L 1204001-500 956P 1307001-1308500 992L 1393001-1394000 974P 1003001-1004000 974 1096401-1097000 974P 1204501-1206000 974P 1308501-1309000 993L 1394001-1396000 992L 1004001-900 992 1097001-1098000 992L 1206001-1207000 992L 1309001-1310000 974L 1396001-500 972L 1004901-1007100 974 1098001-400 975P 1207001-1210000 974P 1310001-1311000 972L 1396501-1398000 974L 1007101-1008300 992 1098401-1099000 975L 1210001-1212000 992L 1311001-1312000 992L 1398001-400 974P 1008301-1009500 97. 1099001-600 993L 1212001- 1213000 974P 1312001-800 974P 1398401-1399000 956P 1009501-1010700 992 1099601-1100000 975P 1213001-500 996L 1312801-1313000 956P 1399001-1400000 992L 1010701-1011200 972 1100001-1104000 992L 12 13501-1214000 992L 1313001-1317000 992L 1400001-1401000 93. 1011201-1012700 974 1104001-1105000 974P 1214001-1 214600 993L 1317001-1318000 956P 1401001-1403000 924 1012701-1013000 992 1105001-1106000 992L 1214601-1215000 97SP 1318001-1321000 992L 1403001-1409000 940 1013001-1015000 978 1106oo1-WO 978L 1215001-1216000 974L 1321001-300 990L 1409001-500 94. 1015001-300 974 1106501-1107000 972L 1216001-1219000 992L 1321301-1322000 992L 1409501-1410000 940 1015301-1016000 992 1107001-1109000 992L 1219001-1220000 974P 1322001-700 974L 1410001-1414000 924 1016001-300 975 1109001-1111000 972L 1220001-1221000 992L 1322701-1323000 972L 1414001-300 941 1016301-600 973 1111001-1112000 974L 1221001-1223500 974P 1323001-1324000 992L 1414501-1415000 925 1016601-10 18000 993 1112001-1113000 974P 1223501-1224000 956P 1324001-1325000 996L 1415001-1417000 924 1018001-1020000 992 1113001-1116000 992L 1224001-1227000 992L 1325001-1326500 975P 1417001-1410000 940 1020001-1022600 950 1116001-900 974P 1227001-1228000 972L 1326501-1327000 993L 1419001-1420000 924 1022601-1023000 952 1116901-1117000 974L 1228001-700 992L 1327001-300 956P 1420001-1421000 940 1023001-700 992 1117001-1119000 992L 1228701-1229000 990L 1327301-1329000 974P 1421001-1422000 924 1023701-1024500 974 1119001-1120000 978L 1229001-500 956P 1329001-1330000 992L 1422001-1424000 940 1024501-600 974 1120001-1122000 992L 1229501-1230000 974P 1330001-1331300 974L 1424001-1428000 92. 1024601-1025000 972 1122001-1123000 974P 1230001-123 1000 974L 1331301-800 972L 1428001-1430000 940 1025001-1027000 075 1123001-500 972P 1231001-1232000 992L 1331801-1332000 978L 1430001-200 924 1027001-400 993 1123501-1125000 974P 1232001-1233000 974P 1332001-1334000 992L 1430201-400 948 1027401-1029600 075 1125001-1127000 992L 1233001-1236000 992L 1334001-400 974P 1430401-1431000 924 1029601-1030000 973 1127001-1128000 972L 1236001-500 974P 1334401-1335000 956P 1431001-1433000 940 1030001-1032000 992 1128001-1129000 974L 123650]-1237000 956P 1335001-300 978L 1433001-1438000 924 1032001-1033000 974 1129001-1130500 974P 1237001-500 996L 1335301-1336000 972L 1438001-500 92. 1033001-200 072 1130501-1131000 956P 1237501-1238000 992L 1336001-1337000 992L 1438501-1439500 924 1033201-800 954. 1131001-1132000 992L 1238001-1239000 956P 1337001-1338200 996L 1439501-1440000 92. 1033801-1035300 074 1132001-1133000 990L 1239001-1241000 992L 1338201-1339000 996L 1440001-1441000 9'0 1035301-600 972 1133001-1134000 978L 1241001-1242000 975P 1339001-1340000 956P 1441001-1442000 924 1035601-1036000 974 1134001-1135000 972L 1242001-400 974L 1340001-1341000 992L 1442001-500 92. 1036001-300 972 1135001-1137000 992L 1242401-1243000 972L 1341001-300 972L 1442501-1444000 924 1036301-800 954 1137001-1138000 956P 1243001 -500 996L 1341301-500 974L 1444001-1445000 940 1036801-1037000 992L 1138001-1139000 956P 1243501-1 244000 992L 1341501-1342000 978L 1445001-1447000 924 1037001-1038000 974 1139001-1140000 978L 1244001-1245000 974P 1342001-1343000 992L 1447001-1448200 940 1038001-1039000 992 1140001-1141000 972L 1245001-1246000 992L 1343001-400 956P 1449001-1450500 924 1039001-200 972 1141001-1142000 956P 1246001-300 974P 1343401-1344000 974P 1500001-600 974P 1039201-500 978 114200 1-500 974P 1246301-800 956P 1344001-1345000 992L 1500601-1501200 956P 1039501-1040300 974 1142501-1145000 974L 1246801-1247000 974L 1345001-600 974L 1501201-1502000 974P 1040301-1041000 992 1145001-1146000 975P 1247001-1248000 992L 1345601-1346000 972L 1502001-1503000 993L 1041001-1042000 974 1146001-500 956P 1248001- 1249700 974P 1346001-1348000 975P 1503001-1504000 ... L 1042001-700 992 1146501-1149000 974P 1249701-1250000 956P 1348001-1349000 974P 1504001-500 . 974L 1042701-1043000 972 1149001-1150000 974L 1250001-1252000 983 1349001-1350000 992L 1504501-1505200 972L 1043001-700 978 1150001-600 950L 1252001-1253000 985 1350001-600 972L 1505201-700 978L 1043701-1044000 992 1150601-1151800 952L 1253001-1257000 983 1350601-135 1000 974L 1505701-1506000 974L 1044001-1045000 97. 1151801-1152000 952P 1257001-900 985 1351001-1352000 993L 1506001-1507000 975P 1045001-1046000 992 1152001-900 950P 1260001-970 Chro.· 1352001-1352300 974L 1507001-1508000 992L 1046001-1047000 975 1152901-1153200 952P 1260971- 1265000 1352301-800 978L 1508001-400 974P 1047001-1048000 974L 1153201-300 1265001-1 266000 956P 1352801- 1353000 974L 1508401-1509000 956P I04SPOI-1049000 992 1153301-500 994P 1266001-1267000 974P 1353001-500 972P 1509001-15 10000 992L 104900 1-500 990 1153501-800 994L 1267001-1268200 978L 1353501-1354200 956P 1510001-1511000 974L 1049501-1051000 992 1153801-1154000 960L 1268201-1269000 978L 1354201-700 992P 1511001-1512000 975P 1051001-200 975 1154001-500 950L 1269001-600 992L 1354701-1355000 974P 1512001-1513200 992L 1051201-1052000 993 1154501-11S5000 950P 1269601-1270000 992L 1355001-1356000 992L 1513201-600 992P

"'Hamilton 36 size chronometer watch

15


No. Grade No. ' Crade No. Grade No. Grade No. Grade

1513601-1514000 992L 1637001-1638000 974P 1861001- 1863000 900 2393001-2395000 974P 2900001-2911500 979 1514001-200 956P 1638001-1642800 992L 1863001-700 920 2395001-2397000 992L 2911601-2931900 979F

1514201-1 5 15000 974P 1642801-1643000 992P 1863701-1864300 900 2397001-2398000 974L 3000001-3002300 922

1515001-1516000 992L 1643001-1644000 992L 1864301-1805000 920 2398001-2401000 992L 3002301-3002500 922M.P.

1516001-15 17000 974P 1644001-1646000 974L 1865001-500 914 2401001-2402000 974P 3002501-3003800 922 1517001-1520000 992L 1646001-1648000 972L 186550 1-1870300 910 2402001·2407000 992L 3003801-3004000 922M.P.

1520001-1521200 974L 1648001-1649000 992L 1870301-1871500 914 2407001-2409000 974P 3004001-3006100 922 1521201-1 522000 978L 1649001-1652000 974P 1871 501-1875 100 910 2400001-2413000 992L 3006101-3006300 922M.P.

1522001-600 974P 1652001-1653000 950L 1875101-600 914 2413001-2414000 974P 3006301-3008000 922 1522601-1525000 956P 1653001-1654000 956P 1875601-1876500 910 2414001-2415000 974L 3008001-3008600 922M.P.

1525001-]527000 996L 1654001-1657000 974P 1876501-1877500 914 241 1'>001-2418000 992L 3008601-3010000 922 1527001-1528000 992L 1657001-1660000 992L 1877501-1878700 910 2418001-2420000 974P 3010001-3010500 922 1528001-1531000 974P 1660001-1661000 978L 1878701-1880000 914 2420001-2422000 992L 3010501-3010700 9221LP.

153 1001-1533000 992L 1661001-1663000 974P 1880001-300 920 2422001-2423000 974P 3010701-3011900 922 1533001-600 974P 1663001-1664000 974L 1880301-1881500 900 2423001-2432000 992L 3011901-3012500 922M.P.

1533601-1534000 956P 1664001-1665000 950L 1881501-700 920 2432001-2433000 974P 3012501-3013100 922 1534001-100 975P 1665001-1666000 974P 1881701-900 900 2433001-2434000 992L 3013101-3013700 922M.P.

1535101-200 975P 1666001-1667000 956P 1881901-1882900 920 2434001-2435000 974P 3013701-301 5700 022 1535201-600 975P 1667001-1669000 974P 1882901-1885000 900 2435001-2437000 992L 3050001-3054800 902 1535601-1536000 993L 1669001-1670000 978L 1885001-1887400 910 2437001-2438000 974P 3054801-3056000 922 1536001-1537000 972L 1670001-1671000 974P 1887401-1888600 914 2438001-2442000 992L 3056001-3060800 902 1537001-1 538000 992L 1671001-300 992L 1888601-1891000 910 2442001-2445000 974P 3061001-3065100 904

1538001-800 956P 1671301-900 992P 1891001 - 189 2200 914 2445001-2451000 992L 3 100001-3133800 916 1538801-1539000 974P 1671901-1672000 992L 189220 1-1894600 910 2451001-2453000 974P 3 135001-3152700 918

1539001-1540000 992L 167200 1-1676000 974P 1894601-1895800 914 2453001-2455000 992L 3200001-3460900 912

1540001-500 992P 1676001-1678000 992L 1895801 - 1899000 910 2455001-2456000 974P 4000001-4447201 987F

1540501-1541000 992L 1678001-1679000 974P 1899001-300 900 2456001-2457000 992L 4447301-4523000 987E

1541001-1542200 974P 1679001-168 1000 974L 1899301-1900000 920 2457001-2458000 950L A -00 1 to A -8450 980B

1542201-800 956P 168 1001-1682000 974P 1900001-400 910 2458001-2459000 974L lB-OOl to IB-4000 999B

1542801-1543000 974P 1682001-1683000 956P 1900401-1902100 9B 2459001-2461000 992L 2B-OOi to 2B-700 999B

1543001-1544000 996L 1683001-1685000 974P 1902101- 1907000 910 2461001-2462000 974L 2B-701 to 2B-8oo 950B

1544001-1545000 992L 1685001-1686000 992L 1907001-1909000 91·1 2462001-2464000 992L 0 -001 to 0-H39000 992B

1545001-400 9781.. 1686001-1688000 974P 1909001-1910000 910 2464001-2466000 974P E-OOI to E-1l4000 989 1545401-1546000 974L 1688001-500 978L 19 10001-500 920 2466001-2468000 992L E-1l4001 to E-140400

1546001-1 548000 992L 1689001~00 975P 1910501-1911000 900 2468001-2469000 974P 989E

1548001-600 974L 1690001-1691000 956 19 11001-1913000 920 2469001-2472000 992L 1"-101 to 1<~-57600 995 1548601-1549000 972L 1691001-1693000 992L 1913001- 1914000 900 2472001-2473000 974P 1~-57601 to F-5985O 995A

1549001-1550000 974P 1693001-1696000 956P 19 14001-1920000 910 2473001-2474000 992L 1~-59851 to lr-62000 995 1550001-500 972P 1696001-1699000 992L 1920001-1922000 920 2474001-2475000 974P 1~-62001 to F-63000 995A

1550501-1552000 974P 1699001-1703000 074P 1922001- 1924000 910 2475001-2476000 992L F-63001 to F-63800 995 1552001-1555000 992L 1703001-1704000 992L 1924001-1925000 900 2476001-2477000 974P F- 63801 to F-286200 995A

1555001-1557000 993P 1704001-1705000 956P 1925001- 1936000 910 2477001-2490000 992L G-OOI to G-13600 980 1557001-800 972L 1705001-1706000 974P 1936001-1937000 920 2490001-2492000 974L G-13601 to G-146oo

1557801-1558000 974L 1706001-1707100 992L 1937001-900 900 2492001-2504000 992L 980 & 98DA

1558001-500 956 1708001-1714000 992L 1940001-1941000 914 2504001-2505000 950L 0 -14601 to G-445oo 980 1558501-1559700 956P 1714001-]715000 974P 1941001-1949000 910 2505001-300 950L G-44501 to G-45ooo 980A

1559701-1560000 974P 1715001-1717000 992L 1949001-1950000 914 2506001-2526000 992L G-45001 to G-47400 980 1560001-1561000 975P 1717001-800 956 1950001-1962000 910 2526001-2528000 974P G-47401 to G-484oo 980A

1561001-1563000 992L 1718001-1750000 992L 1962001-1963000 914 2528001-2533000 992L G-48401 to G-58200 980 1563001-1565000 978L 1750001-1761000 900 1963001-1975000 910 2533001-2534000 974P G-58201 to G-58700 980A

1565001-1567000 992L 1761001-]765000 914 1975001-1976000 914 2534001-2535000 992L G-58701 to G-616OO 980 1567001-1568000 974L 1765001-1767000 920 1976001-1980000 910 2535001-2536000 974P G-61GOI to G-62500 980A

1568001-1569000 992L 1767001-1768000 014 1980001-1981000 914 2536001-2537000 974L G-62501 to G-67500 980 1569001-1571000 972L 1768001-1769000 900 1981001-1988500 910 2537001-2538000 974P G-67501 to G-686OO 980A

1571001-1572000 974P 176900 1-1770000 020 1989001-400 914 2538001-2539000 974L 0-68601- to G-486000 980

1572001-1573000 975P 1770001-1778200 014 2000001-200 1700 988 2539001-2542000 974P H-OOI to H-I000 921 1573001-1575000 9 74P 1778201-1779000 010 2001701-2002400 986 2542001-2543000 992L H-l001 to H-1800

1575001-4.00 950L 177900 1-1780000 920 2002401-800 988 254.3001-2545000 974P 400 & 921

1575401-1576000 950P 1780001-1782000 910 2002801-2003100 986 2545001-2547000 992L 1I-1801 to H-20oo 921 1576001-1577000 950L 1782001-500 920 2004001-2035000 986 2547001-2548400 974P H-2001 to H-2800

1577001-1578000 975P 1782501-1783000 900 2035001-2037200 981 2548401-2548600 974L 400 & 921

1578001-1580000 992L 1783001-1808000 910 2040001 -2064900 986 2548601-2548700 974P H-2801 to II-3500 400 1580001-1581200 974L 1808001-1810000 914 2100001-219 1300 98GA 2548701-2550000 974L 11-3501 to H-3oooo 921

158 1201-1582000 956P 18 10001-18 11000 910 2200001-2248000 987 2550001-2551000 992L H-50D0l to H-57500 401 1582001-1583000 974P 1811001-18 13000 900 2248001-2300000 987b~ 2551001-2552000 974L J-OOI to J-32oooo 982

1583001-1584000 992L 18 13001-18 18000 910 2300001-2311000 992L 2552001-2555000 992L 1\1-001 t() M -58000 982M

1584001-1585000 978L 18 18001-1819000 914 2311001-2312000 974L 2555001-2555600 974L N-ool to N-223OO0 721 1585001-1586000 972L 1819001-1821000 910 2312001-2321700 992L 2555701-2557000 974L 0-1 to 0408000 987A

1586001-1 587000 992L 182 1001-1822000 914 2321701-2323000 974L 2558001-2560000 992L R-OOI to R-1400 923 1587001-500 992P 1822001-1827000 910 2323001-2326000 992L 2560001-2561000 974L 8-001 to 8-3400 950B

1587501-1589000 992L 1827001-600 914 2326001-2327000 974P 2561001-2563000 992L 88-001 to 88-71500 9878

1589001-500 956P 1827601-1829100 910 2327001-2333000 992L 2563001-2564000 974L T-OOI to T-312ooo 911 1589501-1590000 974P 1829101-500 914 2333001-2336000 974P 2564001-2566000 992L V-OOI to v-38ooo 911M

1590001-1591000 974L 1829501-1830000 010 233600 1-233 8000 992L 2566001-2566800 974L X-OOI to X-125000 917 1591001-1592000 992L 1830001-1831000 000 2338001-2339000 974P 2567001-2581000 992L 1592001 -1 593000 974P 1831001-1 832000 920 2339001-2340000 074L 2581001-2583900 09ZE 1593001-1595000 992L 1832001-700 910 2340001-2341000 974P 2583901-2584300 992L 1595001-200 974P 1832701-1 833300 914 2341001-2346000 992L 2584301-2596000 992E 1595201-900 956P 1833301-1 834500 910 2346001-2347000 974P 2596001-2597000 974L 1595901-1596000 974P 1834501-1835400 914 2347001-2356000 992L 2597001-2608000 992E 1596001-1611000 992L 1835401-1836900 910 2356001-2358000 974P 2608001-2608800 974L 1611001-1612100 974P 1836901-1 837400 914 2358001-2364000 992L 2609001-2611000 992E 1612101-1613000 956P 1837401-1 839000 910 2364001-2365000 974P 2611001-2611400 950L 1613001-600 996L 1839001-500 914 2365001-2374000 992L 2611401-2613000 950E 1614001-900 {I56P 1839501-1844700 010 2374001-2375000 974P 2613001-2618000 992E 1614901-1615000 974P 1844701-1845700 914 2375001-2378000 992L 2618001-2619000 950E 1615001-1625000 992L 1845701-1848300 910 2378001-2380000 974L 2610001-2631000 992E 1625001-200 950L 1848301-1849500 914 2380001-2383000 992L 2631001-2631600 950E 1625201-1626000 952L 1849501-1851900 910 2383001-2384000 950L 2631801-2632000 050E 1626001-1627000 974P 1851901-1853100 914 2384001-2385000 992L 2632001-2639000 992E 1627001-1633000 992L 1853101-1856800 010 2385001-2396000 974P 2639001-2641000 950E 1633001-1635000 950L 1856801-1857900 914 238GOOI-2390ooo 992L 2641001-2649000 992E 1635001-1636000 992L 1857901-1860300 010 239000 1-2391000 9UP 264.000 1-2650600 950E 1636001-1637000 956P 1860301-]861000 914 2391001-2393000 992L 2651001-2655300 992E

16

INTRODUCTION TO MATERIALS LISTS

HAMILTON WATCHES EASILY REPAIRED WITH GENUINE MATERIALS

Genuine Hamilton materials are identical with those used in the original model of any given size or grade of Hamilton watch. Repair of Hamilton watches with genuine material, therefore, is a relatively simple, foolproof operation and makes it possible for the watchmaker to restore any Hamilton to the fine mechanical condition it was in when it left the factory. Genuine Hamilton materials are packaged at the factory and each envelope or container is plainly marked with essential identifying data.

For definitions of terms and explanations of abbreviations employed in the following pages of materials lists refer to the Glossary of Terms and Abbreviations on page 2.

All hole jewels cataloged in the following materials lists, unless they are marked unset, are jewels in settings.

To order Hamilton material secure the movement grade number which is engraved on one of the bridges of virtually all Hamilton movements, then consult the index on page 2. Hamilton movements which do not have grade numbers engraved on them do carry serial numbers which can be checked against the serial numbers listed on pages 12 to 16 to secure the grade number. All materials are classified by watch size and grade on pages indicated in the index. When the material desired has been located under the appropriate grade, the order can be prepared. Always use catalog number and part name on material orders. All orders for Hamilton material should be sent to Hamilton material jobbers. If Hamilton material jobbers in your area are not known, write the Material Sales Department of this Company for a list of such jobbers.


17

924 925 926

GRADES 927 928 929

930 931 932

Special Note:

933 934 935

Grade 92": TlCo Piece Pallet and Fork before No. 655001 Solid Pallet and Fork after No. 655800

Grade 926: Two Piece Pallet and Fork be/ore No. 673001 Solid Pallet amI Fork rifter No. 673000

Grade 927: TIVQ Piece Pallet and Fork be/ore No. 658501

Co •• No.

22 129 255

57 59

243 104

16 17 71 32 34 76 29 64A

15B 159 167 169 134 135 147 149 .1.42 143 137 13B 480 477 47B

6B 15

69 92A 91 93A

375B 97

253 120 125 26 62 63

392 394 4B2 482B 103 207 20B 179 205 IB5 192 200 190 194

18

Solid Pallet and Fork after No. 658500

~fate,.ial

Arbor. barrel Arbor. pallet. 2 piece paJlet a nd fork Arbor, pallet, soUd pallet and fork Dalance. with screws Balance (with screws) and Stail' Balance complete Band. dust. O.F. Barrel Barrel and Arhor Cap, hairspring stud Click. after moot. No. 100000 Click. before moDt. No. 100001 Collet. hairspring Hub. winding wheel Index Jewel, balance upper Jewel, balance lowor Endltone. balance upper Ends tone. balance lower J .... w .... l. cQnter upper J .... wel. cent{!r lower Jewel. escape or pallet. upper J .... wel. escape or pallet. lower Jewe l. fourth upper Jewel. fourth lower Jewel, third upper J ewel. third lower Jewel, roller Stone. paUet. receiving Ston ..... pallet. discharging

(When orderin9. please slate tohether pallet stone is for solid or t piece pallet and fork.)

Lever. regulator Mainspring, Str. 20Y2. refill No. 202 or Str. 21~ Nut. regulator Pallet. 2 piece Fork, 2 piece Pallet and Fork, 2 piece Pallet and FOl'k, solid Pallet, Fork and Arbol', 2 piece l~allet. Fork and Arbor, solid Pinion. Cannon Pinion. escape Pinion, winding ltegulntOI',O.I<" Regulator, Htg. Roller Roller and J ewel Pin Screw, balance Sel'ew. meantime Sel'ew. banking Screw, wIndIng bridge Screw, halrsprlng stud cap Screw. case Screw. click Screw, baJance cock Sel'ew, dial foot Screw, winding wbeel hub Screw, index Sel'ew. jewel, balance upper, balance lower, and lower plate

18 SIZE MOVEMENTS

Cut. No. ifluteriol

211 Serew. regulator lever 182 Ser .... w. pillar 201 SCl'eW, shipper 206 Sel'ew, click spring 203 Screw, regulator spring 202 Sel'ew. shipper spring 210 Serew. yoke spring 67 Screw, regulator 30 Shipper 50 Spring. click afler movt. No. 100000 51 Spring. click, before movt. No, 100001 75 Spring, hair, breguet 65 Spri ug. reg ulator 49 Spring. sh ipper 48 Spring, yoke

127 Staff. balance, S.R. 607 Stud. hairspring

79 Wheel. center stafl' and pinion 82 Wheel. third and pinion 84 Wheel. fourth and pinion 89 Wheel, escape and pinion 44 Wheel. hour 45 Wheel, mlnut{! 35A Wheel, ratchet 42 Wheel, setting 38 _ Wbeel. winding 40 Wheel, interwinding 27 Yoke

936 937

GRADES

938 939

Special Notet

948

Grode 936 fitted with: regular barrel before No. 981001 motor borrel ojter No. 987000 3ingle roiler b~ore No. 426001 double rofter after No. 426000

Grade 937 fitted witht

CUE. No.

22 236 129 255 SOB 58A 5BB

242A 242D

16 17

233 234 235

70 71 32 34 76

237 2. 64A

15B 159A 159 166 169 16B 133 135 146 140 141

regular borrel be/ore No. 652901 m.otor borre l after No. 652900 3ingle roller be/ore No. 652901 double roller of tel' No. 652900

"luterial Arbor, barrel Arbor. motor barrel Arbor. pallet, 2 piece pallet and fork A.-bor, pallet, solid pallet and fork Bnlane ..... with screws Balance (wit,h screws) and Staff. s.n. Balanc .... (with screws) and Staff, D.R. Dalanc ..... complete, S.R. Balance. complete, D.R. Darrel Darrel and Arbor Darrel. motor Barrel. motor with arbor and nut fitted Barrel, motor, complete with arbor. hub, nut aod ratchet wheel fitted Cap, regulator CaP. hairspring stud Click, afler mout. No. 100000 Click. before moul. No. 100001 Collet. hairspring Hub. motor barrel lIub, winding wheel Ind ell Jewel. balance upper Jewel, balance lower, D,R. Jewel. balance lower, S. R. End8tone, balance upper End.tone, balance lower, S.R. End8tone, balance lower, D.R. Jewel. center upper Jewel, center lower Jewe l, escape upper Jewel. escape lower Jewel. fourth upper

Cat. No.

143 146 140 136 13B 470 475 476

6. 15

232 25 69 92 90 91 93 93A

375 95 97

252 120 125 26 66 61 62 63

391 306 305 392 304 4Bl 482A 193 207 209 ISO 205 1B6 192 200 191 194 197 195 212 1B3 67

201 206 204 202 210 30 50 51 75 65 49 4B

126 127 607

79 B2 84 B8 44 45

239 3M 42 3B 40 27

iflateriol

Jewel, fourth lower Jewel. pallet upper Jewel, pallet lower Jewel. third upper Jewel, third lower Jewel. roller Stone, pallet, receiving Ston .... , pallet, discharging (When ordering, please slale whether pallet stone is for solid or t piece pallel and fork.)

I.ever, regulator Main.pring. Str. 20~, refill No. 202 or Str. 2 1 ~

!\fain.pring, Str. 18, M,B" refill No. 204 Nut. M.B, arbor Nut. regulator PaUet. 2 piece Fork. 2 piece, D.R. Fork, 2 piece, S. R . Pallet and Fork, 2 pIece, D.R. Pallet and Fo rk. 2 piece. S.R. Pallet and Fork, solid Pallet. Fork and Arbor, 2 pIece, O,R. Pallet, Fork and Arbor, 2 piece, S,R. l·all .... t. Fork and Arbor, solid Pinion. cannon Pinion, escape Pinion . winding Regulator. old style, O.F. Rcgulator, old style, Htg, Regulator, new style, O.F. Regulator, new style, Htg. Roller, small Roller. large Roller, large and jewel pin Roller. single Roller, Single and-jewel pin Screw, balance Screw, meantime Scr ew, banking Screw. winding bridge Serew, hairspring stud cap Serew. case Scr .... w. click Screw, balance cock Screw, dial foot Screw, winding wheel hub Scr .... w. index Screw, jewel, balance upper or lower,S.n. Screw, j ewel, balance lower, D,R. Screw, jewel, plate Serew, regulator Jever Screw, pOlar Scr .... w, regulator Screw. shipper Scr .... w. click spring Scrcw, reguJator spring Screw. shipper spring Serew. yoke spring Shipper Spring. clIck, after movi. No. 100000 Spring, clIck, before movt. No, 100001 Spring, hair, breguat Spring, reguJator Spring. shipper Spring, yoke Staff. balance, D,R,

Staff, balance, s.n. Stud, hairspring Wheel, center, stafl' and pinion Wheel, third and pinion Wheel, four~h and pinion Wheel. escape and pinion Wheel, hour Wheel. minute Whcel, motor ratchet Wheel, ratchet Wheel. setting Whe .... l. winding Wheel, interwinding Yoke

CI CI

GRADES

940 941 942 943 Special Note:

Grade 940fiucd ",it/I: regular barrel before No. 594501 motor barrel after No. 594500 "ingle roller bl!/ore No. 512201 donble roller after No. 512200 TtDO Piece Pollet and Fork be/ore No. 653001 Solid ('aUet and Fork a/tel' No. 653000

Grade 9·1.1 fitted u:itf" reG"t"r barrel before No. 623001 motor barrel aftcr No. 623000 .ingle roller before No. 419101 double roller after No. 419100

Grade, 9<i.2 lind 943:

Cat . No.

22 236 12" 254

56B 58A 5"B

242A 242B

16 17

233 234 235

7l 32 34 76

237 2. 6U

158 ls9A 159 166 169 168 133 135

14" 149A 160 162 I4l 143 136 13" 479 475 476

68 15

232 25 69 92 90 91 93 93A

375 9. 96

251 120 124 26 60 61 62 63

391 396 395 392 394 '81 482A 193

motor barre l on all m ove",,,,,,I,,

Material

Arbor. barrel Arbor, m otor barrel Arbor, p a llet, 2 piece, pallet aud fork Arbor, pallet, solid, pallet and fork BalaDce, with screws Balance (with screws) and StofT, S.H. Balance (with screws) and Staff, D,R. BalancC), complete, S.R. Balance, complete, D.R. Barrel Barr(!l and Arbor Barr(!I, motor Banel, motor, with arbor a nd out fttted Barnl, motor, complete with arbor, hub nut and ra.tchet fitted Cap, hairsp ring stud Click, used after mODI. No. 100000 Click, used before mODi. No. 100001 ColI(!t, ha.irspring Hub. motor barrel Hub, winding wheel Ind(!x J .... w .... l. balance upper Jewcl, bala.nce lower, D.R. J(!wel. balance lower, S.R. End.tooe. balance upper End.tooe, balance lower, S.R. End.tone. ba.lance lower, D.R. Jew .... l. center upper J .... w(!l. center lower J ewel , escape or pallet upper Jewel. AB(",ape or pallet lower End,tone, escape or pallet upper Endl!ltone, escape or pallet lower J(!wel, fourth upper Jewel, fourth lower J(!wel, third upper Jewel, third lower Jewel. rolier Stone, pallet, receiving Stone, pa.llet, discharging Lever, regulator Mainspri ng, Str. 20, retlll N o. 203 Maiuspring, Str. 18, M.D., refill No. 204 Nut, motor barrel arbor Nut, regulator Pallet, 2 piece Fork, 2 piece, D.R. Fork, 2 piece, S.H. Pallet and Fork, 2 piece, D.H. Pallet and Fork, 2 piece, S.R. Pallet and Fork, solid Pallet , Fork and Arbor, 2 piece. D .R. Pallet, Fork and Arbor, 2 piece, S.R. Pallet. Fork and Arbor, solid Pinion, cannon Pinion, escape Pinion, winding Regulator, old style, O.F. Regulator. old stt/le, Htg. Regulator, new slllle, O.F. Regulator, new stule, Htg. Roller, small Roller, large Roller. large, and jewel pin Roller, single Roller, single, and jewel pin Screw. balance Serew, meantime Serew. banking

18 SIZE MOVEMENTS

Co •• No.

207 209 180 205 186 192 200 191 194 197 195 212 183 67

201 206 20. 202 210 30 50 51 75 65 .9 48

126 127 607

79 82 8. 87 44 '5

239 35A 42 38 40 27

~/aterial

Screw, winding bridge Serew, hairspring stud cap Screw, case Screw, click Screw, balance cock Screw, dial foot Screw, winding wheel bub Ser .... w, index Screw. jewel, balance upper or lower, S.R. Screw. jewel, balance lower, D.R. Screw, jewel, plate Screw. regulator lever Serew, pillar Scr ew. regulator Serew. shipper Serew, click spring Serew, regulator sprinlG Serew, shipper spring Screw. yoke spring Shipper Spring, click used after mOllt. No. 100000 Spring, click used before movt. No. 100001 Spring, hair, breguet Spring, regulator Spring, shipper Spring. yoke Staff, balance, D.R. Staff, balance , S.R. Stud. hairspring Wh .... el, center stair and pinion Wheel, t-hird and p inJon Wh ........ l, fourth and pInion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, m otor ratchet Wheel, ratchet Wheel, setting Wheel. winding Wheel. interwinding Yoke

GRADES

944 946

Special Note:

Grade 944 fitted I"itlu o ld Iftyle motor borrel be/ore No. 479001 nel" style motor barrel after No. 479000

Grode 946jitted lGith:

Cot. No.

23 236 129

128

255

254

56B 58B

242B 18 I. 20

21

233 23'

23.

71 32 76 24

237 29 64 64A

158

old .,tyle motor barrel b e/ore No. 459801 n cUl .tyle motor barrel after No. 459800

"'aterial

Arbor, motor barrel, old st ille Arhor. motor barrel, new stille Arbor. pallet, 2 piece pallet and forie, Grade 944 Arbor, pallet. 2 pioce pallet and fork, Grade 946 Arhor. pallet, solid pallet and fork, Grade 044 Arbor, pallet, solid pallet and fork, Grade 946 Balance with screws Balance (with screws) and Staff Balance, completo Barrel, motor, old style Disc. motor Barrel. motor, old SIt/Ie, with arbor and nut fitted Barrel. motor, old stille, complete with arbor, hub, nut and ratchet wheel fitted Barrel, motor, new style Barrel. m otor, new stille, with arbor and nut fitted Barrel. motor, new stille, complete with arbor, hub, nut and ratchet fitted Cap, hairspring stud Cliek Collct. bairspring Hub, motor barrel, old style Hub. motor barrel, new stills Hub, winding wheel Index. Grade 046 Inde:c, Grade 944 Jewel, balance upper

Co •. No.

159 159A I66R 166 168 130 132 133 135 146 148 149 149A 160

162

141 143 136 138 479 47. 476

68 14

232 25 69 92 !lO 93

375 9.

95

251 252 120 124 125 26 60

391 396 395 .81 482A 193 216 207 209 180 205 186 192 213 200 191 19. 197 195 183 67

201 206 20. 202 210 30A 50 75 65 49 '8

126 607

79 82 8' 87 88 44 '5 37

239A 42 38 39 '0 27 27A

Moterial

Jewel, bala.nce lower, S.H.. J ewel, balance lower, D.R. Endstone, balance upper, Grade 946 End.tone, balance upper. Grade 944 Endstone, b a lance lower Jewel, barrel upper Jewel , barrel lower Jew.", center upper Jewel. center lower J ewel, escape. or pallet upper, Grade 944 Jewel, escape. or pallet upper, Grade 046 Jewel, escape, or pallet lower, Grade 944 Jewel , escape, or pallet lower, Grade 946 Endstone, escape, or pallet upper, Grade 946 End.tone. escape, or pallet lower, Grade 046 J(!wel. fourth upper Jewel, fourth lower Jewel. thIrd upper Jewel. third lower Jew .... l. roller . Ston(!, pallet, receiving Stone. pallet, discharging Leve r. regulator Mainspring, motor barrel, old style Mainspring, motor barrel , new stt/le Nut. motor barrel arbor Nut. regulator Pollet, 2 piece Fork, 2 piece Pallet and Fork, 2 piece Pallet and Fork. solid Pallet. Fork and Arbor, 2 piece, Grade 946 Pallet. Fork and Arbor. 2 piece, Grade 944 Pallet. Fork and Arbor. solid, Grade 948 Pall .... t. Fork and Arbor. solid, Grade 944 Pinion, cannon Pioion, escape, Grade 946 Piuion. escape, Grade 044 Pinion, winding Regulator Roller. small Roller. large Roller. large and jewel pin Screw, balance Screw, meantime Screw. banking SCr(!W, motor ratebet bridge Screw, winding bridge Screw. hairspring stud cap Screw. case Screw, click Screw, balance cock Ser(!w, dial foot SCr(!W, motor barrel hub Screw, winding wheel hub Screw, index Scr(!w. ba.lance upper jewel Screw, balance or barrel lower jewe l Scr(!w. plat-e o r barrel upper jewel Screw, pillar Screw. regulator Screw, shipper Serew, click spring SCr(!W, regulator spring Screw, shipper spring Scr(!w, yoke spring Shipper Spring, click Spring, hair, breguet Spring, regulator Spring, shipper Spring, yoke StafT, balance, D.R. St.ud, hairspring Wheel. center staff and pinion Wheel. third and pinion Wheel, fourth and pinion Wheel escape and pinion, Grade 946 Wheel, cscape and pinion, Grade 944 Wheel, bour Wheel, minute Wh .... el. motor ratchet, Grade 944 Wheel, motor ratchet, Grade 946 Wheel, setting Wh .... e l. winding. Grade 944-Wheel. winding, Grade 046 Wheel, interwinding Yoke, Grade 944 Yoke. Grade 946

Co •• No.

542

563

563A 432 432F

433A 433F

320

321 322

50B 379B 574B 535 535A 536

536A

328 557 558 71

330 330.'\. 325A

76 543

560

561 315 559 465 466 472R 472

474 552 565J 554 447 449 458 459 461 461A 467R 469 454 455 457 462 463 464 464A 470 470A

469 450 451 453 47. 47S 476

414 414A 413 413A 415 534

544 562 375 376

20

950 JUorerioJ

GRADES

952 996

Arbor, motor barre1, Grades 960 and 96£ before No. 846601 Arbor, motor barrel, Grades 960 and 96£ a/ler No. 848600 Arbor, motor barrel, Grade 996 Arbor, pallet, Grade 960 Arbor, pallet, friction, Grade 960 after No. 1677000 Arbor, pallet. Grades 95£ and 996 Arbor, pallet, frIction, Grade 96£ after No. 1169£00 and Grade 998 after No. 1999000 Arbor, winding, P.S., Grades 960 and 95t before No. 1874401 Arbor, winding, lever set Arbor, winding, P.S .• Grades 960 and 96£ afler N o. 1674400 Balance, wllh screws nalance (with screws) and Staff Balance, complete Barrel, motor, Grades 960 and OM! Barrel, motor, Grade 996 Barrel, motor with arbor and nut fitted, Grades 960 and 9U Barrel, motQl' with arbor and nut fitted. Grade 996 Bridge, setting wheel Cap, motor ratdlet. Grades 960 and 95f Cap, motor ratchet, Grade 996 Cap, hairspring stud Cliek, before No. 776001 Click, after No. 776000 Cluteb, Grades 96t and 996 Collet, hairspring lIub, M.B.. Grades 950 and 96! before No. 846601 Hub, M .B., Grades 950 and 9511 after No. 846600 Hub, motor barrel, Grade 998 Hub, winding wheel, two holes Hub, winding wheel, one hole Jewel, balance upper Jewel, balance lower End.tone, balance upper. Grade 950 End.t.one, balance upper, Grades 95t and 996 End.t.one, balance lower Jewel, barrel upper, Grades 960 and 95Z Jewel, barrel upper. Grade 996 Jewel, barrel lower Jewel, center upper Jewel, center lower Jewel, escape upper. Grades 96S and 996 Jewel, escape upper, Grade 960 Jewel, escape lower. Grades D6t and 996 Jewel, escape lower, Grade 950 End.t.one, escape upper, Grade 960 End.t.one, escape lower, Grade 960 Jewel, fourth upper, Grade 960 Jewel, fourth upper, Grades 95S and 996 Jewel, fourth lower Jewel, pallet upper, Grade 960 Jowel, pallet upper, Grades 96f and 906 Jewel, pallet lower, Grade 950 Jewel , pallet lower, Grades 9611 and 996 End.t.one Cup, pallet upper. Grade 950 End.t.one Cap, pallet upper, after No. 1676001 End.t.one, pallet lower, Grade 950 Jewel, third upper. Grade 960 Jewel, third uppe·, Grades 96! and 996 Jewel, third lowel Jewel, roller St.one, pallet. receiving StOlle, pallet, dJscharging

(When ordering. please state whether pallet slone is for solid or ! ptece pallet and fork.)

Leur, dutch. Grades 96t and OD6 Lever, clutch, Grade 950 Lever, setting. Grades 96t and 996 Lever, setting, Grade 950 Lever, shop Main.prlng, Str. 16~, motor barrel, refill No. 210 Nut, M.B. arbor Nut~ M .B. hub. Grade 996 Pallet and Fork Pallet, Fork and Arbor, Grade 960

16 SIZE MOVEMENTS

Co •• No.

376A

323 425 429 430 326 381 38lA 391 396 395 481 482A 495 488 511

1361

209 485 493 491 192 494A 512 5 t2A 498 197 507 518 523 523A 516 506 508 204 524 508 529 401 565 331 417 418 421 386 383A

3830 420 420A 416 434 319 607 342

343 355 356

361 362

366 367

332 333 538 556 537

329 3130 564 564A

Co •• No.

600 601 602 350 604 606 603 607 362 356

MoteriGl

Pallet, Fork a nd Arbor, Grades 96t and 996 Pin , push Pinion, cannon Pinion, escape. Grade 960 Pinion, escape, Grades 9611 and 996 Pinion, winding Regulator, Grade 960 Uegulator, Grades 9611 and 996 Roller, small Uoller, large Holler, large and jewel pin Serew, balance Screw, meantime Screw, banking Serew, bridge Serew, pallet bridge Serew. setting wheel bridge or M.B. ratchet cap Serew, hairspring stud cap Sc .. ew, case Screw, click Screw, balance cock Serew, dinl, for 4 footed dial Serew, dIal, for 3 footed dial Sc rew , winding wheel hub, two holes Screw, winding wbeel bub. one bole Screw, jewe1, balance or plate upper Screw, jewe1, balance or pallet lower Screw~ clutch and setting lever Screw. r egulator, micrometric SCl'e w, shipper. bef ore No. 858001 Screw, shipper, afler No, 868000 Serew, click spring Screw, clutch spring, lever set Screw, clutch spring, P.S. Serew, regulator spring Screw, shipper spring, lever set Serew. setting lever spring. P .S. Screw, yoke, lever set Shipper, before No. 868001 Shippel', after No. 868000 Spr ing, click Spring. cluteh, lever set Spring, cluteh, P.S. Sprillg, clutch lever Spring, bair, breguet Spring, regulator and screw, Grades 950 and 96t Spring, regulator and screw, Grade 996 Spring, setting lever, Grades D5t and 996 Sprin g, setting lever. Grade 950 Spring, shipper. lever set Staff, balance, D.R. Stelll, case Stnd, hairspring Wheel, center staff and pinion, Grades 960 and 99(] Wheel. center staf!' and pinion, Grade 9614 Wheel, third and pinIon, Grade 950 Wbeel, third and pinion. Grades 96Z and 996 Wheel, fourth and pinion, Grade 960 Wheel, tourth and pinion, Grades 96ft and 990 Wheel, escape and pinion, Grade 950 Wheel, escape and pinion, Grades 952 and 006 Wheel, hour Wheel, minute Wheel, ratchet, mot-or, Grade 950 and 95Z Wheel, ratchet, motor, Grade 996 Wheel, ratchet, motor, Grades 950 and 9 .. Wheel, sett,ing Wheel, windblg Yoke, lever set, Grade3 952 and 996 Yoke, lever set, Grade 960

GRADE 950E lUateria'

Balance (with screws) and Hub Balanee (with screws) and Staff Balanee, complete Collet. hairspring Hub, balance Spriog, bair Staff, ba lance Stud. hairspring Whee l, fourth and pinion Wheel, third and pinion

Co •• No.

53B 3130

Ca,. No.

683 610 680 611 (iOtA 612 613 6BI 682 616 017 618 387A 619 620 621 622

023 696 604A 62. 692

6070 625 626 027

628 629 630 631 632 479 67B 079 534B 633 634 635 630 637 640 641 642 643 644 4BI 645 482A 495 085 646 680

5097 049 650

6093

1366 651 518 652

6096 1798 687 68B 655 656 675 657 658 659 677 662 665 693 6B9 668

6042 691 670 673 695

Materia'

Wheel. ratchet Wh_I, winding

All other procurabJe parl3 same as Grade 950

GRADE 950B Material

Arbor, barrel Arbor, pallet A .. bor, ratchet wheel Arbor, winding Dulnneo (with screws) and Hub Bnlance (with screws) and Stuff Dulnnee, complete Ba .... el Darre l and Arbor Click Clip, winding arbor C lutch Collet, hairspring End.tone CU I" balance upper Elld8t.one Cap, balance lower End.tone Cnp. escape upper End8tone Cup, escape lower or pallet lower End.tone Cap, pallet upper Hook , maiuspring Hub, balance wheel Jewel. balance upper or lower Jewel, barrel upper Jewel, barrel lower Jewel, centilr upper Jewel, conter lower Jewel, escape upper, or lower, or pallet lower Jewel, fourth upper or third upper Jewel, fourth lower or third lower Jewel, pallet upper Jewel, paIlet stone, receiving Jowel, pallet stone, discharging Jewel. roller Lever. clutch Level'. shipper Main.pring, Str. 15 M1{ Pullet and Fork l'allet, Fork and Arbor l'in, banking, bef ore No. 04049 Pinion, cannon Pinion, escape Pinion, winding Regulutor Roller, large Uoller, large and jewel pin Holler. small Screw, balance Serew, balance cock Serew, balance meantime Serew, banking Serew, bridge Se .. ew, paUet bridge Scr ew, case Sc .. ew, click Screw, dial toot Screw, balance upper cap Serew. cap, balance lower, escape lower, escape upper, or pallet lower Screw, pallet upper cap Serew, shipper lever Screw, mJcrometrlc regulator Screw, regulator spring Se .. ew, setting cap spring Screw, bairspring stud Serew, ratchet wbeel Screw, winding wheel Sprin g, Click Spring, clutcb lever Spring, bair, Elinllar Extra Sp .. ing, regulator Sprin8. settJng cap Stuff, balance Stud. hairspring Wh eel, center and pinion Wheel, escape and pinion Wheel, third and pinion Wbeel, fourth and pinion Wheel, bour Wheel, rolnute W heel, ratchet Wheel, setting Wheel, lower winding Wheel, winding

954 962

GRADES

963 966

967 972

Special Note:

973

erode 972 fitted u,ith: lJingle roller before No. 74800] double rolle r after No. 748000 two piece pollet and fork be/ore No. 724001 solid pallet and fork ofter No. 724000

Grade 973 fitted witli:

Co •• No.

324 433 433A 433F

320 321 322

56B 379A 379B 574A 574B 334 335 328 3 16

71 330 330A 325A

76 315 55. 465 466 472 474 447 44. 458 461 455 457 451 453 47. 475 476

414 546 402

403

404

405

411

412

413A

645 415 647 317 317 410 92 90

371 375A 375 874 376A 425 430 326

JJingle rolle r before No. 7U301 double roller o/ter No. 711300

Material

Arbor, barrel Arbor, pallet. 2 piece pallet and fork Arhor, pallet, solid pallet and fork Arbor, pallet, friction, solid pallet and f ork, after No. 1680401 Arbor, winding, P,B. Arbor, winding, lever set Arbor, winding, P.S., after No. 1674401 Balance, with screws Ba.lance (with screws) and Staff, S.R. Balance (with screws) and Staff. D.R. Balance, complete, S.R. Balance, complete, D.R. Darre l Barrel and Arbor Bridge , setting wheel Cap, ratchet Cap, hairspring stud Click, before No. 776001 Click, after No. 776000 Clutch Collet, hairspring Hub, winding wheel. 2 holes Hub, winding wheel. 1 hole J ewel, balance upper Jewel, balance lower End. tone, balance upper End. ton e, balance lower Jewe l, center upper Jewe l, center lower J e wel, escape upper Jewel, escape lower Jewel, tourth upper Jewel, tourth lower J e wel, third upper Jewel , third lower Jewel, roller Stone, pallet. receiving Stone, pallet, discharging

(When orderlno. please stale whether pallet stone is for solid OT t pieu pallet and fork.)

Le'l'er, clutch. O.F. Lever, clutch. Htg. Leve r , setting. O.F., P .S. , before No. S22911 Lever, setting, Btg., P.S., after No. 82£910 LeYer, setting, O.F., P.S., Nos . 822911 to 719000 incl. Lever, setting, Htg., P.S. , N os. 312911 to 719000 incl. Lever , setting, complete, O.F., P .S., Nos. 822911 to 719000 inel. Lever, setting, complete, Htg., P.S., Nos. 822911 to 719000 incl. Lever, setting, O.F., P.B., after No. 719000 Lever, setting. Ht-g., P.S. after No. 719000 Lever, shop, O.F. Lever, shop, Ht.g. Mainspring, Str. 18, refill 207 Main. pring, Str. 19, refill 206 Nut, r elease stud Pall e t , 2 piece, D.R. Fork, 2 piece, D .R. Fork , 2 piece, S.R. Pallet, and Fork, 2 piece Pallet and Fork, solid. D.R. Pallet, Fork and Arbor, 2 p iece Pall e t , Fork and Arbor, solid Pinion, cannon Pin ion, escape Pinion, winding

16 SIZE MOVEMENTS

Co •. No.

323 382 391 3.6 395 3.2 394 481 482A 495 517 488 511

1361 209 485 4.3 491 192 494A 504 512 512A 498 1.7 507 518 523 523A 516 506 508

204 524 508 200 529 401 565 331 417 418 419 421 64. 386 3830 420

548

422

423

416 434 435 31. 607 408 344 357 363 367 332 333 3lIA 32. 3130 564

lllaterial

Pin, push Regulator Rolle r, small Roller, large Roller, large and jewel pin Roll e r, single Rolle r, s ingle and jewel pin Screw, balance Scr ew, meantime Screw, banking Screw, binding Screw, bridge Screw, pallet bridge Serew, setting wheel bridge Screw, hairspring stud cap Screw, case Scrow, click Screw. balance coCk Screw, dial, 4 footed dial Screw, dial. 3 footed dial Screw, r atchet wheel hub Screw, winding wheel hub, 2 holes Screw, winding wheel hub, 1 hole Screw, jewel. balance upper or plate Screw, jewel, balance lower. or pallet cap Screw, setting lever or clutch lever Screw, r egulator micro metric Screw, shipper, before No. 868001 Screw, shipper, after No. 868000 Screw, click spring Screw, clut.ch spring. lever set Scrow, clutch spring, or setting lever spring, P.S. Screw, regulator spring Screw, shipper spring, lever set Screw, setting lever spring, P.S., 1st series Screw, setting lever spring. P.S., 2nd series Screw, yoke, lever set Shipper, before No. 868001 Shipper, after No. 868000 Spring, click Spring, clutch, lever set Spring, clutch, O.F .. P.B. Spring, clutch, Htg., P.S. Spring, clutch lever, O.F., P.S. Spring, clutch lever, TItg .• P.S. Spring, hair. breguet Spring, regulator and screw Spring, setting lever, O.F., P.S., after No. 719000 Spring, setting lever. Htg., P.B., afler No. 719000 Spring, setting lever, O.F., P .S .• before No. 719001 Spring, setting lever. Ht-g., P.S., after No. 3U910 Spring, sWpper. lever set Slllff, balance, D.R. Staff, balance, B.R. Ste Dl8, case Stu d, hairspring Stud, release Wbeel , cent-er staff and pinJon Wheel, third and pinion Whee l, fourth and pinion Whee l, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet Wh eel , settin g Wheel, winding Yoke, lever set

GRADES

956 964 965

968 969 974

975 976 977

Special Note:

978

Grade. 956 964 965 968 969 975 976 and 971 were fitted with: /JinGle roller before No. 2477001 double roller after No. 2477000

Grade/J 974 and 978 were fitted witll: single roller before No. 2490001 double roller after No. 249<1000

Co •• No.

324 433 433A

433F

320 321 322

57 380 380A 575 575A 334 335 328 550 551 316

71 330 330A 325A

76 315 559 465 466 473 474 448 44. 460 461 456 457 463 464A 452 453 47. 475 476

414 546 402

403

404

405

411

412

413A

545

415 545 318 318 410 92A

371 3750 375B 375 374 376B 376A 425 430 326 323 382 3.1 3.6 395 392 394 482 482B 4.5 517

Material

Arbor, barrel Arbor, pallet, 2 piece pallet and tork Arbor. pallet. solid pallet and fork . before No. 1636201 Arbor, pallet, solid pallet and fork, after NQ. 1686£00 Arbor, winding, P.S., before No. 1674401 Arbor, winding . lever set Arbor, winding. P .B .. after No. 1674400 Blliance, with screws Blliunce (with screws) and Staff, s.n. Bulance (with screws) and Staff, n.R. Bulance, complete, S.R . Balance, complete, D.R. nurrel Burrel and Arbor Bridge, setting wheel Bridge , setting wheel. Htg., P.S. Bridge, stem. Htg., P.S. CliP, ratchet Cup , hairspring stud Click, before No. 776001 Click, after No. 776000 Clutcb Collet, hairspring Hub, winding wheel, two holes lIub , winding wheel, one hole J e wel, balance upper J ewel, balance lower End.tone, balance upper Endlltone, b alance lower Jewel, center upper Jewel, center lower Jewel , escape upper Jewe l, escape lower J e w e l, fourth upper J e wel, fourth lower J e wel , pallet upper Jewel, pallet lower Jewel, third upper Jewel, third lower Jewel, roller Stones, pallet. receiving Stones, paUet, discharging

(When orderino. please state whether pallet stone is for solid or t. piece pallet and fork.)

Lever, clutch , P.S., O.F. Leve r, clutch, P.S., Htg. Lever. setting. P.B., O.F. , before No. 3nOll Lever, setting. P.S., Htg., before No. SUf)JO Lever, setting, P.S., O.F .• Nos. S!t.911 to 71 BOOO incl. LevClr, setting, P.S., Htg., Nos. 8!f!911 to 719000 incl. Lever, setting, complete, P.B .• O.F., Nos. 3t.t911 to 7 19000 incl. L ever, setting, complete, P.S., Htg .• Nos. 3!f0I1 to 719000 incl. Lever, setting, P.S., O.F., after No. 719000 Lever, setting, P.S., Htg., after No. 719000 Lever, shop, O.F. Lever, shop, Htg. Mainspring, Str. 18. refill 208 Main.pring, Str. 19~. refill 205 Nut, release stud "ulIet, 2 pjece. S.n. Fork, 2 piece, S.R. Pallet and Fork, 2 piece, S.R. Pullet and Fork, solid , S.R. Pullet and Fork, solid, D.R. l'aUet, Fork and Arbor, 2 piece, B.R. PaUet, Fork and Arbor, solid, S.R. Pnllet, Fork and Arbor, solid, S.R. Pinion, cannon Pinion, escape Pinion, winding Pin, push Regulator Roller, small Rolle r, large Holler, large and j ewel pin Roller, single Hollcr, single and jewel pin Screw, balance Scrcw, m eantime Screw, banking Screw, binding

Oontinued on page 22

21

Co •• No.

487 511

1361 527 208 484 492 400 192 494A 503 511 511A 499 197 507 509 518 523 523A 516 506 508

203 524 200

529 401 565 331 417 418

419

421

549

386 3830 420

548

422

423

416 434 435 319 607 408 344 357 363 368 332 333 311A 329 3130 564

Malerial

Serew. bridge Serew, pallet bridge Sere ... , setting wheel bridge Screw, setting wheel bridge, Ht.g. Serew, hairspring stud Screw. case Serew, click Screw, balance cock Screw, dial, tor 4 footed dials Serew, dial, for 3 footed dials Screw, ratcbet wheel hub Screw, winding wheel hub, 2 holes Screw, wInding wheel hub, 1 hole Serew, jewel, balance upper or plate SCl'ew, jewel, balance lower Screw, clutcb lever Screw, setting lover Serew, regulator, micrometric Screw, sWpper, before No. 858001 Screw, sWpper, afler No. 868000 Serew, click spring Screw, clutch spring, lever set Screw, clutch spring, or setting lever spring P.S. Sere ... , regulator spring Screw, sWpper spring, lever set Screw, setHng lever spring. P.S., Nos. 31191 1 to 719000 incl. Sel'ew, yoke. lever set Shippe ... before No. 868001 Sbippe .. , afler No. 868000 Spring, click Spring, clutch, lever set Spr ing , clutch, D.F. , P.S., Nos. 3Bf911 10 719000 Spring. clutch, Htg., P.S., Nos. 9£2011 to 719000 Spring, clutch lever, D.F .. P.S., after No. 710000 Spring, clutch lever, Rtg. , P,S., after No. 719000 Spring, hair, breguet Spring, regulator and screw Spring, setting lever, P.S., O.F., after No. 710000 Spring, setting lever, P.S., Htg., after No, 710000 Spring, setting lever, P.S., O.F., all grades up 10 No. 710000 Spring, setting lever, P.B .• Htg., all grades up to No. 719000 Spring, sWppcr. lever set Staff, balance, D.R. Staff, balance, S.R. Stelll. case Stud, hairspring Stud, r elease Wheel, center s taf!' and pinion Wheel, tltird and pinion Wheel, fourt h and pinion Wheel, escape a nd pinion Wh eel, hour Wh eel, minute Wheel , ratchet Wheel, setting Wheel, winding Yoke, lever set

960 961 970

GRADES

971

990 991

SIU!Cial Note:

992 993 994

Grade 992fitted Idtll: single roller be/ore No. 377000 double roller olter No. 379301

Grade 993 fitted witla:

Co ••

single roller be/ore No, 367801 double roller qfter No. 367800

No. lUaterial

324 Arbor, barrel 431 Arbor, pallet, 2 piece pallet and fork 432 Arbor, pallet. solid pallet and fork,

before No. 1609001

22

16 SIZE MOVEMENTS

Co •. No.

432F

320

321 322

56B 379A 379B 574A 574D 334 335 334A 335A 328 550 551 316

71 330 330A 32SA

76 315 559 455 466 472 474 447 449 459 461A 467 459 455 457 452 464 470

470A

451 453 479 475 476

414

546 402

403

404

405

411

412

413A

545

415 547 3 17

534 410

92 92A 00

371 375A 375 372 373 376 425 429 326 323 382

Materiol

Arbor. pallet, solid pallet and fork. afler No. 1600000 Arbor, winding, P .S .. all grades up 10 Nf). 719000 A .. I.or. winding, lever set Arbor , winding, P.S., after No. 719000 Balance, with screws DaluDce (with screws) and Staff, S.R. Biliance (with screws) and' Staff, D.R. Ba lance, complete, S.R. Bnlance, complete, D.R. Barrel Burre l and Arbor Barrel, M.D .. Grade 992 only Barrel and Arbor, M.B.. Grade 99£ only Bridge, setting wheel Bridge, setting wheel, Htg., P.S. Bridge, stem, Htg., P.B. Cap, ra.tchet Cap, hairspring stud Click, before NQ, 776001 Click, after No. 776000 Clutch Collet, hairspring Hub, winding wheel. 2 holes Hub, winding wheel, 1 bole J ewel, balance upper Jewel, balance lower End.t.one, balance upper Endstone, balance lower Jewel, center upper Jewel, center lower Jewel, escape upper Jewel, escape lower End.tone, escape upper End.tone, escape or pallet lower Jewel , fourth upper Jewel, fourth lower Jewel, pallet upper Jewel, pallet lower End.tone Cap, pallet upper, before No. 1676001 Endl!ltone CUll, pallet upper, after No. 1676000 Jewel, thIrd upper J e wel, third lower Jewel, roller StoDe, pallet. receiving Slone, pa llet, discharging

(When orderino, please stale whether pallet stone is f or solid or ! piece pallet and fork.)

Le't'er, clutch, P.S.. O.F., after No. 71DOOO Lever, clutch, P .S .• Htg., after No. 710000 Le ve .. , setting, P.S .. O.F., before No. 912910 Le't'e r , setting, P.S., Htg., before No. 3U910 Lever , setting, P.S., D.F .. Nos. 3U911 to 719000 incl. Lever, setting, P.S., Htg., Nos. 322911 to 719000 incl. Lever, setting. complete, P.B., O.F., Nos. 912911 to 719000 incl. Lever, setting. complete, P.B., H t g., Nos. 9229/ 1 10 7 I 9000 incl. Lever, setting, P.B., O.F., afler No. 719000 Lever. setting, P.S. , Rtg., after No. 719000 Leve r, shop, O.l<~. Lel'er, shop, Ht.g. Main.pring, Str. 19, refill No. 206 or Str. 18 . refill No. 207 l\tain»l.ring, Str. 16~, refill No. 210 Nut, release stud l·alle t. 2 piece, D.R. P.llet, 2 piece. S.R. Fork, 2 piece, D .R. For k, 2 piece, S.R. Pallet and Fork, 2 piece, D.R. Pa ll et and Fork, solid, D.R. Pallet, Fork nnd Arbor , 2 p iece, D.R. Pallet, ]o~ork and Arbor. 2 piece, S.R. Pallet, Fork and Arbor, solid, n.R. Pinion , cannon Piniou, escape Pinion, winding Piu, push Regulator, Grades 980. 981, 971 , 991, 99S, 999 and 994

Co •. No.

382A 391 396 395 393A 392 394 481 482A 495 517 4BB 511

1361 527 209 4B5 493 491 ,.2 494A 504 512 512A 49B 197 498 507 518 523 523A 516 506 508

204 524 200

52. 401 565 331 417 418

419

421

549

386 383C 420

548

4.22

4.23

416 434 435 31. 607 40B 342 355 356 3., 352 366 332 333 30!) 3llA

32. 3130 564

Co •• No.

609 610 611 60lA 612

lUoteriGl

Resulator, Grades 970 and 990 Rolle .. , sm&ll Uoll er. large Rolle r , large and jewel pin, stool Roller. large and jewel pin, bronze Rolle r, single Roller, single and jewel pin Screw, balance Screw, meantime Screw, banking Screw, binding Screw, bridge Screw, pallet bridge Sc .. ew, setting wheel bridge Screw, setting wheel bridge Btg. Screw. hairspring stud Cap Screw, case Screw, clJck Screw, balance cock Screw, dial for 4 footed dial Screw, dial for 3 footed dJal Screw, ratchet wheel hub Screw, winding wheel hub, 2 holes Screw, winding wheel hub, 1 hole Screw, balance upper jewel Screw, balance lower jewel, or pallet cap Screw, plate jewel Screw, clutch lever or setting lever Screw, regulator, micrometric Sc .. ew, sWpper, before No. 868001 Screw, sWpper, after No. 868000 Screw, cUck spring Screw, clutch spring, lever set Screw, clutch spring, or setting lever spring, P.S. Screw, regulator spring Screw, shipper spring, lever set Screw, setting lever spring, P .S., Nos. 8U911 to 719000 Screw, yoke, lever set SlIipper, before No, 858001 Shipper, after No. 858000 Spring, cl1ck SprinS, clutch, lever set Spring. clutch, D.F., P.s., Nos. SU911 10 719000 Spring, clutch, Htg. , P.B., Nos. SU911 to 719000 Spring, clutch lever, P.s., O.F., after No. 719000 Sprins, clutch lever, fitg., P.B .. afler No. 119000 Spring, hair, breguet Spring, r egulator and screw Spring, setting lever, P.B., O.F .. after No. 719000 SpriDS, setting lever, Htg., P.B., after No. 719000 Spring, setting lever, P.B.. O.F. , all grades up to No. 719000 Spring, setting lever. P.B., Htg., all grades up 10 No. 719000 Spring, sWpper, lever set Staff, balance, D.R. Staff, balance, S.n. Stem, case Stud, hairspring Stud, release Wlleel, center stan and pinion Wlleel, third and pinion, gold Wheel, third and pinion. brass Whee l, fourth and pinion, gold Wheel, fourth and pinion, brass Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet, Grades 960, 961 and 994 Wheel, ratchet, Gradu 970, 971, 990, 991, 99! and 99J Wheel, setting Wheel, winding Yoke, lever set

GRADE 992B Material

Arbor, barrel Arbor, pallet Arbor, winding Bal anco (with screws) and H u b Bulance (with screws) and Sta rr

I I I I I

I

I I

I I I I I

I I

I I

I I I

I

I

Cot. No.

613 614 615 616 617 618 387A 619 620 621 622

623 604A 624 625 62~ 627

628 629 630 631 632 479 678 679 534B 633 634 635 636

Cot. No. 3320 3355 3400 3402 3499 3314 3315 3338 3408 3340 3335 3415 3503 3326 3440 3441 3447 3449 3417 3418 3419 3421 3422 3425 3426 3429 3431 3435 3442 3444 3436 3438 3452 3450 3451 3344 3328 3333 3404 3405 3348 3353 3334 3406 3413 3453 3453A

16 SIZE AND 12 SIZE MOVEMENTS

Illoteriol

Balanee, complete BaJ:'rel Barrel and Arbor Click Clip, winding" arbor Clutch Collet, hairspring End1!ltone Cap, balance upper End8tone Cap, balance lower Ends tone Cap, escape upper Endatone Cap, escape lower or pallet lower Eudstone Cap, pallet upper Hub, balance wheel Jewel, balance upper or lower Jewel, cen ter upper Jewel, cent.er lower Jewel , escape upper or lower. or pallet lower Jewel, fourth upper or third upper Jewel, fourth lower or third lowor Jewel, pallet upper Jewel, pillet stone, receiving Jewel, pallet stone. discharging Jewel, roller Lever, clut-ch Lever, shipper Mainllpring, Str. 15.% MM Pallet and Fork Pall e t , Fork and Arbor Pin, banking, before No, C404l1 Pinion, cannon

GRADE 400 (Thin Model)

lUaterial

Arhor, motor barrel Arbor, pallet Balance, with screws Balance and Staff, with screws Balance, complete Barrel, motor Barrel, arbor, motor Cap, setting wheel Cap, hairspring stud Click , complete Clutch Collet, hairspring Hub, rat-chet wheel Hub, winding wheel Jewel, balance upper Jewel, balance lower Endstone, bala.nce upper Endstone, ba.lance lower Jewel, barrel upper Jewel, barrel lower Jewel, center upper, unset Jewel, center lower Jewel, third upper, unset Jewel, third lower Jewel, fourth upper, unset Jewel, fourth lower Jewel , escape upper Jewel, escape lower Endstone. escape upper Endstone, escape lower Jewel, pallet upper Jewel, pallet lower Jewel. roller Stone, paUet, receiving Stone, pallet, discharging Lever, setting Mainspring, Str. 16 Nut. regulator. adjusting Pallet and Fork Pallet, Fork and Arhor Pinion, cannon Pinion, escape Pinion, winding Regulator Roller, combination, complete Screw, balance Screw, meantime

16 SIZE MOVEMENTS

Cot. No.

637 640 641 642 643 644 481 482A 495 645 646 647 648 649 650

6093

1366 651 518 652

6096 1798

653 654 655 656 675 657 658 659 677

Material

Pinion, escape Pinion, winding Regulator Roller, large Roller, large and jewel piu Roller, small Screw, balance Screw, baJance meantime Screw, banking, after No. C4048 Screw. bridge or balance cock Screw, paliet bridge Screw, case Screw, click Screw, dial foot Screw, balance upper cap Screw, cap, balance lower, escape lOwer, escape upper, and pallet lower Screw, pallet upper cap Screw, shipper lever Screw. micrometric regulator Screw, regulator spring Screw, setting cap spring Screw, hairspring stud Screw, ratchot wheel Screw. winding wheel Spring, click Spring, clutch lever Spring, hair Spring, regulator Spring, setting cap Staff, balance Stud. hairspring

12 SIZE MOVEMENTS

Cot. No.

3460 3455 3479 3473 3475 3454 3474 3466 3461 3470 3477 3479 3471 3472 3469 3478 3342 3443 3407 3416 3411 3350 3332 3377 3386 3392 3397 3369 3370 3318 3336 3337 3322

Cot. No.

1229 1230 1255

Material

Screw, banking Screw, bridge Screw, pallet bridge orwinding wheel hub Screw, setting or minute wheel cap Screw. hairspring stud cap Screw. case Screw, ra.tchet wheel Scre w. balance or escape lower jewel Screw, escape cap Screw, setting lever Screw. micromotric regulator Screw, click spring Screw, clutch spring Screw, setting lever spring Sorew, setting lever stop Screw, regulator spring Spring. cluteh Spring, setting lever Spring, regulator Stud, hairspring Spring, hair, breguet Staff, balance SteDl, winding Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel. hour Wheel, minute Wheel, ra.tchet Wheel, setting, small Wheel, setting, large Wheel, winding

GRADES 900' 910 914

*Grades with motor barrel

Special Note:

920'

double roller after No. 1902600 . ingle roller type bcfore No. 1902601

lJ.faterial

Arbor, motor ba.rrel. Grades 900 and 920 Arbor, barrel, Grades 910 and 914 Arbor, pallet, Grades 900,910 and 914

Cat. No.

662 665 672 667 668

6042 669 670 673 674

Cot. No.

601A 601 602 608 350 604A 349 348 606 603 605 607

Cot. No.

1256 1232 1300

1301 1302

1302A

1303

1303A

1399

1400 1214 1216 1215 1217 3038 1308 1224 1225 1240 1239 3035 1315 1227

1403

1226 1340 1341 1347

1347A 1348 1349 3143 1342 1344 1345

1346 1317 1318 1319

Material

Wheel , center and pinion Wheel, escape and pinion Wheel , third and pinion Wheel, four th and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, settin&.. Wheel, lower 1f'inding Wheel, winding

All other procurable parts same as Grade 992

GRADE 992E Material

Balance (with screws) and Hub Balance (with screws) Hub and Staff Balance, complete Bridge, pallet Collet. hairspring Hub, balance wheel Jewel. roller RoUer Spring, hair, breguet Staff, balance Staff, balance with hub Stud, hairspring


ltJaterial

Arbor, pallet, Grade 920 Arbor, winding Balance. with screws, Grades 900, 914 and 920 Balance, with screws, Grade 910 Balance (with screws) and Staff, S.R. type. Grades 900, 914 and 920 Balance (with screws) and Staff, D.R. type, Grades 900, 914 and 920 Balance (with screws) and Staff, S.R. type, Grade 910 Balance (with screws) and Staff, D.R., Grade 910 Balance, complete, Grades 900, 920 and 914 Balance, complete, Grade 910 Barrel, motor, Grades 900 and 920 Barrel, Grades 910 and 914 Burrel, arbor cap, Grades 900 and 920 Barrel and Arhor, Grades 910 and 914 Bridge, setting wheel Cap, hairspring stud Cup, ra.tchet wheel. Grades 900 and 9tO Cap, ratchet wheel, Grades 910 and 914 Click, Grades 910 and 914 Click, and spring, Grades 900 and 920 Clutch Collet, ha.irspring Hub, M.B., Grades 900 and 920, before No. 1761001 Hub, M.B., Grades 900 and f}fO, afler NQ. 1761000 Hub, winding wheel Jewel, balance upper Jewel. balance lower End.tone, balance upper. Grades 900 and .. 0 Endstone, balance upper, Grade 914 Endstone, balance upper, Grade 910 Endstone, balance lower Endstone Cap, escape upper, Grade 920 Endstone, escape upper, Grade 920 Endstone, escape lower, Grade 9£0 Endstone Cap, pa.llet upper, with jewel, Grade 9&0 End$tone, pallet lower, Grade 920 Jewel, barrel upper, Grades 900 and 920 Jewel, barrel, lower, Grades 900 and 920 Jewel, center upper, Grades 900 and 9£0

Oontinued. aD page 24

23

Cat. No.

1319A ]320 1321 1330 1332 1333 1331 1334

1335 1326 1327 1328 1329 1336

1337 1338

1339 1322 1323 1324 1325 1352 1350 1351 3045 3045A 1244 1244A 1246 1246A 1228 544

1304 1305 1305A

1248 1253 3054 3034 1233 1306 1306A 1312 3112 1313

alIa 3 114 1353 1353A 3153B

1353C 1360 494A

1376 203

136 1 1375 1354

192 3 157 1359 1374 1379 1365 1366 1365

3163 1362

1365

3157 1377 1358 1371 1378 1372 1241 1243 1243A 1311 1307 3042 3042A 1250

24

lUaterial

Jewel, center upper, Grade 914 J ewel, center upper, Grade 910 Jewel , center lower Jewel, escape u pper. Grade 900-Jewel, escape upper, Grade 914 Jewel, escape upper. Grade 910 lewel, escape upper, Grade 910 Jewel, escape lower, Grades 900. 910 aud 914 Jewel, escape lower, Grade 9fO l .. wel, fourth upper , Grades DOO and 9£0 J ewel , fou rth upper, Grade 914 J ewel , fourth upper, Grade 910 Jewel, fourth lower Jewel, pallet upper, unset, Grades 900, 910 and 914 J ewel , pallet upper, unset, Grade 9£0 Jewel, pallet lower, Grades 900, 910 and 914 Jewel, p allet lower, Grade 920 Jewel, t,hird upper, Grades 900 and 9fO Jewel, third uPI)er, Grade 914 Jewel, third upper, Grade 910 Jewel, third lower Jewel, roller Stone, p aUet, receiving S ton e, p allet, dIscharging Lever, clutch, Grades 900, 910 and 914 Lever, clutch, Grade 9fO Lever, setting, Grades 900 and 9£0 Lever, setting, Grades 910 and 914 Lever, shop, Grades 900, 014 and 9£0 Lever, shop, Grade 910 Main,pring, Su. 17-"1 , refill 211 Nut. mot-or barrel arbor, Grades 900 and 9£0 PaIJet and Fork Pallet. Fork and Arl.or, Grade 9 £0 Pallet, Fork and Arbor, Grades 900, 910 and 914 I'inion. cannon Pinion, escape, Grade 9fO Pinion. escape, Grades 900, 910 and 914 Pinion, winding Pin, push Regulator, Grades 000 and 9£0 Regulator, Grades 010 and 914 Roll e r, la rge brass, S.B. type Roller, large steel, D. R. Roller, large and jewel pin, brass , S.H. type Roller, large and jewel pin, steel, D.R. R o ll er, small Screw, balance. Grades 900, 914 and 9fO Scr ew, balance, Grade 910 Scr ew, meantime, Grades BOO, 914 and 9£0 Scr ew, meantime, Grade BI D Scr ew, banking Scr ew. bridge Screw, p allet bridge Screw, inter mediate cal) Screw, motor barrel ratchet wheel cap Serew, hairspring stud cap Scr ew, case Screw, click, Grades 900 and O£O Scr ew, click, Grades 910 and 914 Screw, dial foot Scr ew, ratchet wheel h ub Scr ew, winding wheel hub Scr ew, bala.nce upper je.wel Screw, balan ce lower jewel Screw, escape upper jewel, Grades 910, ot4 and 900 Screw, escape upper jowel, Grade 9£0 Screw, fourth u pper jewel, Grades 900 and 9£0 Screw, third or fourth upper jewel, Grades 910 and 914 Screw, clutch or sett;ing lever Screw, micrometric regulat-or Scr ew, click spring Screw, clutch spring Screw, regulator spring Screw, setting lever spring S ,.ring , click, Grades 910 and 91 4 Spri ng, clutch lever, Grades 910 and 91 4 Spring, clutch lever, Grades 900 and 9£0 Spri ng , hair, br eguet Sprin g, r egulator and screw Spring, setting lever, Grades 900 and 9£0 Spring, setting lever, Grades 910 and 914 S t aff, balance, S.B. type

12 SIZE MOVEMENTS

Co" No.

1250A 1316 1277

1278

1279

1286

1287 1288 1292

1293 1294 1297 1298

1299 1269 1270 1218 1220 1221 3037 3036 1222 1222A 1223

902

ltfateria l

S taff, balance, D.R. Stud, hairspring Wheel, center, stair and pinion, Grades 900 alld 9£0 Wheel, center, staff and pinion, Grade 914 W h eel, center, staff and p inion, Grade 910 Wheel, third and pinion, Grades 900 and ",0 W h eel, thIrd and pinion, Grade 914 Whee!, third aod pinion , Grade 910 W h eel, fourth and pinion, Grades 900 and .. 0 W h eel, fourth and pinion, Grade 914 W h eel, fourth and pinion, Grade 910 Wheel, escape and pinion, Grade 920 W h eel, escape and pinion , Grades 914 and 900 Wheel, escape and pinion. Grade 910 Wheel, hour W h eel, mInute W h ed, r atchet, Grades 900 and 9£0 Wbeel, ratchet, Grade 914 W h eel, ratchet, Grade 910 W h eel, set-ting, small Wheel, setting, large W h eel, winding, Grade 9fO W h eel, winding, Grades 900 and 914 W h eel, winding, Grade 910

GRADES

904 912 916 918 922 Special Note:

Grade 912 fitted with: n on-friction balance jewelin g before No. 3139801 friction balance jeu:eling after No. 3159800

Grade 918/ittcd with:

Cat. No.

3029 3030

3055 3056 3032 3100 3101 3102 3103 3199 3200 3014 1216 3015

3017

3038 3108 3040 3035 3 115 3203 3026 3140 3140F 1341 3147

3 147F

3 147A 3 148 3148F 1349 3149F 3143 3142

3144

1345 1346

non-friction balance jeu:elillg be/ore No. 338ot-201 friction balance j e welillg after No. 338ot-200

Materia l

Arbor, ban'aJ, Grades 902 and 922 Arhor, barrel, Grades 911, 916, 004 and 918 Arbor, pallet, straight pivots Arb or, pallet, conical pivots Arbor, winding Balan ce, with gold screws Balance. with gil t screws Balance (with gold screws) and StafT Balance (wIth gUt screws) and S taff Balance, complete, gold screws Balance, complete, gilt screws Burrel, Grades 90f and 9tf! Barrel, Grades 9U, 916. 904 and 918 Barrel , cap and arbor, Grades 90t and 9 .. Durrel. cap and arbor, Grades 91f, 016, 904 and 918 Dridge, setting: wheel CliP, hairspring stud Clid, Clu t ch Collet, ha.irspring 1-1 .. h , motor barrel Huh, winding wheel Jewel, balance, upper Jewel, friction, balance, upper Jewel, balance. lower EndstoDe, balance upper, r aised gold setting Endstone, friction, b a lance upper, raised gold setting End,tone, balance, upper, gold setting End,tone, balance upper, gilt setting Endslone, friction, balanCe upper Enclstone, balance lower Ends lone, friction, balance lower Endstoufl Cap, escape upper. Grade 9ft EndSlonc, escape upper, gold setting, Grade 02£ Eudslonc, escape lower, Grades 004, 9/8 and 92£ Endstone Ca l" pallet, u pper, Grade 9t2 Endstoue, pallet, lower, Grade O£2

Co" No.

3117 3 118 3119 3U9A 3120 3 121 3122 3 123 3124 3125 3126

3127

3128

3 129 3130

3 132

3133

3131

3134

3 135

1336

1337 3138

3139 1352 1350 1351 3045

3045A 3044

3044A 3046 3028 3104 3105 3105A 3048 3053 3054 3034 3033 3106 3 106A 3112 3113 3114 1353

1353A 3 153B 3160

494A 3155A 3176

203 3175 1354 3157

192 3179 3 174 3156 3158 a166A 3162

3163 1365

1366

3166A

3168 3 177 3171 3178 3172

~faterial

Jewel, barrel upper Jewel, barrel lower Jewel , center upper, raised gold setting Jewel, center upper, gold setting Jewel , center upper, gilt setting J e wel , center lower Jewel, third upper, raised gold setting Jewel, third upper, gold setting Jewel, third upper, gilt setting J e wel, t hird lower J ewel . fourth upper, raised gold setting, Grades 902 and 9t2 J ewel, tourt·h upper, gold setting , Grades 904,916 and 918 J e wel, fourth upper, gilt setting, Gradt 91£ Jewel, fourth lower J ewel, escape upper, raised gold setting, Grade 902 Jewel, escape upper, gold setting, Grade 916 • Jewel, escape upper, gilt setting, Grade 9IB Jewel, escape upper. gilt setting, Grades 904, 9f! and 918 Jewel, escape lower, Grades 9J!, 916 and 90£ Jewel, escape lower, Grades 904, 918 and .U Jewel, pallet upper, Ullsct, Grades 91£, 90t, 904, 916 and 918 Jewel, pallet upper, unset, Grade 9£t Jewel. pallet lower, Grades 912, 916, 90£ and 918 Jewel, pallet lower, Grade Btl! Jewel , roller S ton e, pallet, receiving Stone, pa.llet, discharging Levcr, clutch, Grades 90£, 9££, 904 and 918 Lever , clutch , Grades 912 and 916 Le ver, setting, Grades ~Ot, 92£, 904 and 918 Lever, setting, Grades 912 and 916 Lever, shop Mainspring, Str. 1 7~, refill No. 211 Pallet and Fork Pallet, Fork and Arbor, conical pivots Pallet, Fork and Arhor, straight pivots Pinion, cannon Pinion, escape, conical pIvots Pin ion, escape, straight pivots Pinion, winding Pin, push Reg ulator, Grades 90f!, 922, 904 and 918 Regulator, Grade! 91 2 and 916 Roller, large Holler, largo and jewel pin Roller, small Screw, balanCe, Grades 902, 904 , 916, 918 and 9 U Screw, balance, Grade 91£ Screw. meantime Screw, banking Screw, bridge Screw, balance cock Screw, pa.llet brIdge Scr ew, intermediate cap Screw, hairspring stud cap Screw, case Screw, click, setting lever or clutch lever Serew, dial foot Scr e w, winding wheel hub Screw, r atchet wheel Scr e w, barrel upper jewel Screw, center upper jewel Screw, escape or pallet lower jewel Screw, fourth or escape upper jewel, Grades 90£, 904 and 918 Screw, escape upper jewel, Grade 9££ Serew, balance, third, fourth and escape jewel, upper jewel, Grades 00£, 904, 918 and 922 Screw, balanCe lower jewel, Grades 902, 904,916 and 922. Screw, balance lower jewel, Grades 91£F and 918. Scr e w, pallet cap, Grade O££ Screw, r egulator, m.icroDletrie Screw, spring clutch Screw, spr ing regulat()r Screw. spring setting lover

Cat. No.

3041 1243A

1243 3111 3107A 3042

1242 3050 3116 3077

3078

Ca •. No.

6011 6034 6053 6054 6055 6005 6074 6019 6015 0065 6009 6010 6079 6080 6077 6067 6068 6073 6069 6075 6073 6069 6081 6082 6083 6018 6022 6021 6056 6057 6029 6033 6014 6058 6063 1353A 6088 6087 6094 6086 5097 6091 6092 6093 6000 1798 6096 1798 6097 6098 6020 6061

Cat. No.

1524 1525 2110

12 SIZE, 10 SIZE AND 0 SIZE MOVEMENTS

Material

Spring, click Spring. clutch lever, Grades 902, 901t. 918 and 922 Spring. clutch lever, Grades 912 and 1)16 Spring, hair, bregue~ Spring, regulator, with screw Spring, ntting lever, Grades 902, 904, 918 and !) 12 Spring, setting lever, Grades 912 and 916 Staff, balance Stud, hairspring Wheel, cent-er, staff and pinion, swedged arm, gold Wheel, center, staff and pinion, swedgcd arm, gilt

GRADE 917 Material

Arbor, barrel Arbor, pallet Balanee, with screws Balance (with screws) and Staff Balance, complete Barrel Banel and Arbor Click Clutch Collet, hairspring Hub, balance wheel Hub, winding wheel Endstone Cap, balance upper Endstone Cap, balance lower Jewel, balance upper or lower Jew.,}, center upper Jewel, center lower Jewel, escape upper or escape lower Jewel, fourth upper or fourth lower Jewel, pallet upper Jewel, pallet lower Jewel, third upper or third lower Stone, pallet, receiving Stone, pallet, discharging Jewel, roller Lever, clutch Lever, setting Mainspring, Str. 17 MM Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion, escape Pinion. winding Regulator Roller. combination Screw, balance Screw, balance cock Screw, bridge Screw, pallet bridge Screw, case Screw, click Screw, dial foot Screw, balance upper cap Serew, balance lower cap Screw. setting lever Screw, hairspring stud Screw, setting cap spring Screw, hairspring stud Screw, ratchet wheel Screw, winding wheel Spring, click or clutch levor Spring, hair, Elinvar Extra

981

Material

GRADES

983 985

Arbor, barrel, Grade 983 Arbor, barrel, motor, Grade 985 Arbor, barrel, Grade 981

12 SIZE MOVEMENTS

Cat. No.

3079

3086

3087

3088 3092

3093

3094 3097 1298

Material

Wheel, center, staff and pinion, flat arm, gilt Wheel, third and pinion, swedged arm, gold Wheel, third and pinion, swedged arm, gilt Wheel, third and pinion, flat arm, gilt Wheel, fourth and pinion, swedged arm, gold Wheel, fourth and pinion, swedged arm, gilt Wheel, fourth and pinion, flat arm, gilt Wheel, escape and pinion, Grade 922 Wheel, escape and pinion, Grades 902, 904 and 918

10 SIZE MOVEMENTS

Cat. No.

6040 6027 6026 6066 6045 6052 6048 6050 6041 6017 6042 6007 6016 6008

Cat. No.

6011A 6012 6053A 6054A 6055A 6072 6005A 60l9A 6089 6071 6070 6067A 6073A 6043 6080 6069A 6033A 1353 6100 6093 6002 6013 6004 6099 6045A 6052A 6048A 6050A 6007A 6008A

Material

Spring. setting cap Staff. balance SteIn. winding Stud, hairspring Wheel, center and pinion Wheel, escape and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, hour Wheel, intersetting Whee l, minute Wheel. ratchet Wheel, setting Wheel, winding

GRADE 921 ~faterial

Arbor, barrel Arbor, ratchet wheel Balance, with screws Balance (with screws) and Staff Balance, complete Barrel Barrel and Arbor Clicl~

Hook, barrel arbor Jewel, barrel upper Jewel, barrel lower Jewel, center upper Jewel, escape upper or lower Endstone Cap. escape upper Eudstone Cap, escape lower Jewel, fourth upper, or third upper Pinion, escape Screw, balance Screw, regulator Screw. regulator spring Screw. regulator strap Screw, ratchet wheel Spring, regulator Strap, regulator Wheel, center and pinion Wheel. escape and pinion Wheel. third and pinion Wheel, fourth and pinion Wheel, ratchet Wheel, winding


o SIZE MOVEMENTS

Cat. No. 2133 1528 2151 1580 2152

1581

~faterial

Arbor, pallet Arbor, winding Balance, with screws, Grade 981 Balance, with screws, Grades 983 and 985 Balance (with screws) and Staff. Grade 981 Balance (with screws) and Staff, Grades 988 and 985

Cat. No.

1299

3069 3070 3019 3020 3021 3036 3037 3022 3023

B023A

Cat. No.

6011A 6012 6035 6025 6024 6055A 6072 6005A 6019A 6089 6030 6071 6070 6067A 6043 6080 6073A 6069A 6085 6084 5080 6073A 6090 6064 6033A 6059 5084 6093 5038 5085 1798 6013 6100 6093 6002 6060 6003 6039 6027S 6099 6045A 6036 6048A 6050A 6006 6038

Cat. No. 2153 1581A 2105 1512 1514 2106 1513 1515

Material

Whe.,}, escape and pinion, Grades 912 and 916 Wheel, hour Wheel, minute Wheel, ratchet, Grades 902, 904 and 922 Wheel, ratchet, Grades 916 and 918 Wheel, ratchet, Grade 912 Wheel, setting NO.1 Wheel, setting No.2 Wheel, winding, Grade 922 Wheel, winding, Grades 902,904.916 and 918 Wheel, winding, Grade 912

GRADE 923 Material

Arbor, barrel Arbor, ratchet wheel Arbor, pallet Balance, with screws Balance (with screws) and Staff Balance. complete Barrel Barrcl and Arbor Click Hook, barrel arbor Hub, balance wheel Jewel, barrel upper Jewel, barrel lower Jewel, center upper Endstone Cap, escape upper Endstone Cap. escape lower lewel, escape upper or lower Jewel, fourth upper or lower J e wel, pallet upper Endstone Cap, pallet upper Endstone, pallet lower Jewel, pallet lower Lever, clutch Pallet, Fork and Arbor Pinion. escape RegulatOl: Screw, balance Screw. escape upper or lower cap Screw. pallet upper cap Screw, pallet lower cap Serew, hairspring stud Screw, ratchet wheel Screw, regulator Screw, regulator spring Screw, regulator strap Spring, hair,Elinvar Extra Spring, regulator Spring, sotting cap Staff. balance Strap, regulator Whcel, center and pinion Wheel, escape and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, ratchet Wheel, winding


Material Balance, complete, Grade 981 Balance. complete, Grades 983 and 985 Barrel, Grade 981 Barrel, Grade 983 Barrel, motor, Grade 985 Barrel and Arbor, Grade 981 Barrel and Arbor, Grade 983 Barrel, Motor and Arbor, Grade 986

Continued on page 26

25

Cot. No.

1534 1522A 2119 1537 1538 1531 1592 1526 1523 2109 2174 2 175 1608

2176 2177 1594 1595 1596 2164 2165 1602 2170 2171 1600 2168 21 69 2172 2173 1598 2166 2167 2012 2010 2011 1542 2124 1541

·Cot. No.

1911 1934 1712 1984A 1905 1906 1918 1909 19 19 2515 2565 1910 2006 Z006A 2007 1779 2008

2008A

2009 1767 1996 1997 1773 2002 2003 1771 2000 2001 2004 2005 1769 1998 1999 2012 20 10 20 11 1725 1724 2422

26

o SIZE AND 6/0 SIZE MOVEMENTS

llfate ria l

Bridge, setting wheel Cap , r atchet wheel, Grade 986 Click , Grade 981 Click, Grade 985 Cliek , Orade 985 Clu tc h Collet . hairspring Hub, motor barrel , Grade 986 Hub, winding wheel, Grade 989 Rub, winding wheel, Grade 981 and 985 Jewel , balance upper Jewel, balance lower Ends tou e, bala nce upper, Grades 988 and 986 End ll tonc. balance u pper, Grade 981 End l!l tOD c , balance lower Jewel , barrel u pper, Grade 986 Jewel , barrel lower, Grade 985 Jewel , cen ter u pper, Grades 98S and 986 Jewel, center upper, Grade 981 Jewel. cen ter lower Jew el, escape upper, Grades 98S and 986 J e wel , escape u pper, Grade 981 Jew el, escape lower J e wel , fourth upper . Grades 98S and 986 Jewel. fourt.h u p per, Grade 981 Jewel . fourth lower Jewel, pallet upper, unset Jewel , pallet lower Jewel, thlrd upper, Grades D8S an d 985 J e wel, thir d upper, Grade 98 1 Jewel, third lo wer Jewel, roller Stone, pallet. r eceiving Stone , pa llet, d ischarging Lever, clutch , Grades 983 an d 986 Lever, clutch, Grade 981 Leve r, settJ.og, Grades 9B9 and 985

GRADES

986 988 lI--faterial

Arbor, barrel Arbor, pallet Arbor, winding. Grade 988 Balance , compleoo Barrel Barrel and Arbor Cap, in termedJate wheel Cap, ratchet wheel Click Clutc h Coll e t, bairspring Hub, winding wheel Jewel , balance u pper, .080 O. D. Jewel , balance u p per, .070 O.D. Jewel , balance lower Ends tone, balance upper, Grade 988 Endstone, balance upper, .080 O.D., Grade 986 Ends tone, balance u p per, .070 O.D .. Grade 986 Ends t one , balance lower Jewe l, cen t-er u pper, Grade 988 Jewe l, cen ter upper, Grade 988 Jew el, cen ter lower J e wel, escape u pper, Grade 988 Jewel, escape u pper, Grade 988 Jewel , escape lower Jewel, fourth upper , Grade 988 Jew el, fourth u pper, Grade 988 J e wel , fourth lower Jewel, pallet u pper, unset Jewel, pa llet lower Jewel, third u p per, Grade 088 Jewel, third u pper, Grade 986 Jewel. t hird lower J e we l, r oller Stone , pallet, r eceiving Stone, pallet, discharging Lever . c lut.cb, Grade 988 Lever , setting, Grade 988 Lever, sWpper , Grade 986

o SIZE MOVEMENTS

Cat. No.

2123 2125 1536

1535 1527 21 54 2155 1546 2128 2132 2113 2112 1584 2156 2160 2161 2162 1613 2181 2384A 2013A 1360 16 15 2197

203 1620 2183

192 3157

192 1374

1531 2199

2189 1366

llIate rial

Lever, setting, Grade 981 Lever, shop Mainspring. Str. 14 >i , r efill 212, Grades 981 and 983 l'oIainspring, Etr. 14~ , M.B.. Grade 986 Nut, motor barrel arbor, Grade 985 Pall e t and Fork Pallet, Fork and Arbor Pinion, cannon, Grades 983 and 985 Pinion, cannon, Grade 981 Pinion, escape Pinio n, winding Pin, push Regulator, Grades 98S and 986 Regulator. Grade 981 Roll er, large Roll er, large and jewel pin Roller, small Scre w. balance, Grades 983 and 986 Scre w, balance, Grade 081 Sere w, meantime, Grades D8S and 986 Scre w, meantime, Grade 981 Scre w. ba nking Screw, brid ge S c r e w, pa llet bridge Scre w, intermediaoo cap Scre w, r a tchet wheel cap Scre w, case Scre w, click, Grades 983 an d 986 Scre w, click, Grade 981 Scre w, dial foot Scre w. ra t-ehet wheel h u b. Grades 981 and 988 Scre w, winding wheel h u b, Grade 989 Scre w, wind ing wheel hub, Grades 981 and 985 Scre w, balance upper Jewel Scre w, balance lower jewel

6/0 SIZE MOVEMENTS

Cat. No.

1726 1921 198.5 1986 1929 1933 1714 1914 1713 1987 1991 1992 2~63 2564 2584 2013 2384A 2013A 2019 2587 2588 2028

208 1785 2014 Z0 14A 1787 2387 2590 2026 1802 2029 2592 1366 1792 2400 1361 2028 2031 208

2031 1798 1920 1723 1923

ltfate rial

Lc .... er. shop, Grade 988 Main.pring, Str. 13~. re1ll1 No. 213 Palle t and Fork Palle t, Fork and Arbor Pinion, cannon Pinion, escape Pinion , winding, Grade 988 Pinion, winding, Grade 986 Pin. push, Grade 988 Regulator Rolle r. large Roller, large and jewel pin, brass Rolle r, large and jewel pin, steel Rolle r , small Screw, ba lance. Grade 988 Screw, balance, Grade 988 Scre w, meantime, Grade 988 Scre w, meantime, Grade 986 Screw. banking S c rew, bridge Scre w, balance bridge S c r e w, pallet bridge Serew,intermediate cap S c rew, case, Grade 988 Screw, case, short, Grade 988 S crew, case, long, Grade 988 Screw, click, Grade 988 Screw, click, Grade 986 S c r e w. dial foot Scre w, ratchet wheel h u b Scre w, winding wheel hub, Grade 988 Scre w, wind ing whool hub, Grade 986 Scre w . balance upper Jewel Scre w, ba lance lower jewel Scre w, clutch lever, Grade 988 Scre w, shipper lever, Gra(l 988 Scre w, click spring Scre w, clutch spring Scre w, retaining spring Scre w, shipper lever spring , Grade 986 SCl'e w, setting lever spring , Grade 988 Scre w, hairspring stud Spring, click Spring, clutch lever, Grade 988 Spring, retaining

Cat. No.

2191 1629 1358 1630 2194 2196 1241 1540 2122 2159 1585 1539 2121 2126 2162A 1566

1567

2143

1572 2146

1576 2148

2150 2139 2139A 2140 1516 1519 2107 2115 1520 1521 2108

Cat. No.

1990 1722 1925 1927 1927A 2526 2366 1975 1978 1980 1982 1971 1972 1907 1916 1917 1908

Cat. No.

2311 2334 2354B 2505 2306 2318 2319 2515 2565 2310 2377 2007 2367 2368 2369 2370 2371 2372 2373 2374 2575 2574 2012

ltfa(orial

Sc rew, clutch lever or setting lever Se rew, regulat or, micrometric Scre w, click spring. Grade 981 Scre w, regulator spring Scre w, setting lever spring Sc rew, ha irspring stud S pring. click, Grade 981 Spring , clutch lever, Grades 98S and 986 Spring, clutch lever, Grade 981 Spring, hair, breguet Spring, regulator and screw Spring, setting lever, Grades 988 and 986 Spring, setting lever , Grade 981 Stllff, bala nce S tud, hairspring Wh eel, center , staff and p inion, Grade 98S Wh eel, center, staff and p inion , Grade 9B8 Wheel, center, stall' a nd pinion, Grade 981 Whee l, t hird and p lmon, Grade 986 Wh eel, third and pinion , Grades 981 and 988 Wh e el, fourth and p inIon. Grade 986 Wh eel, fourth and pinJon , Grades 981 and 98. Wh e el, escape and pinion Wheel , hour, long pipe Wheel, hour, short pipe Wh eel. minu te Wh eel, ra tchet, Grade 986 Whee l, r a.tchet, Grade 98S Wheel, ra.tchet, Grade 981 Wh eel, settJ.og Wh e el, winding . Grade 985 Wheel, winding, Grade 983 Whe el, winding, Grade 981

itfaterial

Spring, hair, breguet Spring, setting lever, Grade 988 Spring, shipper lever, Grade 986 Staff, balance, before f041401 Staff, balance, after 11041400 Stem, winding , Grade 988 Stud, hairspring Wh eel, center, staff and pinion Wheel, third and pinion Wheel, fourth and pinJon Wheel, escape and pinion Wheel, hour Wbeel, minute Wheel, ratchet Wh eel, setting, small Wheel. setting, large Whe el. winding

GRADE 986A ltfateriol

Arbor, barrel Arbor, pallet Dalance, complete Barrel Darrel, arbor fi t ted Cup, intermediate wheel Click Clutch Collet. hairspring Hub, winding wheel Jewel, balance h ole, upper Jewel, balance hole, lower Jewel, center upper Jewel. center lower Jewel, third upper Jewel, third lower Jewel. fourth upper Jowel. fourth lower Jewel, escape upper Jewol, escape lower Jewel, pallet upper, unset Jewel, pallet lOwer Jewel, roller

Ie C

C C C c:::I C

C

______________________ 6_/_0_S_I_Z_E_M __ O_V_E_M_E_N_T_S ________________ ~ Cat. IVo.

2379 2380 2010 2011 2422 2321 2355 2356 2329 2333 1914 2357 2362 2363 2564 2013 2384A 2014A 2015A 2390 2015 2399 208

1798 2387 2018 2397 2598 2592 2593 239. 2395 2400 2589 2320 2361 2425 2327 2526 2366 2345 2348 2350 2352 2341 2542 2507 1916 1917 2508

Cat. IVo.

2511 233' 2553A 25MA

2555A 2505 2506 2513 2319 2515 2565 2565A 2310 2377 2578 2379

2567 2567F

2568 2568F 2569 2569F 2570 2570F 2571 2571F

2572 2572F 2573 2573F

IUateriol

End.tone, balance upper Endlltone, balance lower Stone, pallet, receiving Stone, pallet, discharging Lever, shipper l\1ainllpring, Su. 12 J.i, refill 214 Pollet and Fork Pollet, Fork and Arbor Pinion, cannon Pinion, escape Pinion, winding Uegulatol' Roll er, large Roller, large and jewel pin Roller, small Screw, balance Screw. balance, meantime Screw, case Screw, balance bridge Screw, banking Screw, bridge Screw, pallet bridge Screw, intermediate wheel cap Screw, hairspring stud Screw, click Screw, dial foot Scr ew, ratchet wheel Screw, winding wheel hub Screw. balance upper jewel Screw, balance lower jewel SCl'ew. third , fourth or escape upper jewel Screw, center upper jewel Screw, shipper lever Screw, shipper lever spring Spring, click Spring, hair, breguet Spring, shipper lever Staff, balance SteJ:D, winding Stud, hairspring Wheel, center, stall' and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, mlnut-e Wheel, ratchet Wheel, setting, small Wheel, setting, large Wheel, winding

987

GRADES

987E 987F

~faterial

Arbor, barrel Arbor, pa.llet Balance, with screws, Grade 987E Balance (with screws) and Staff, Grade D87E Balance, complete Barrel Barrel and Arbor Cop, intermediate wheel Click Clutch Collet, hairspring, Grade 987 Collet. hairspring, Grades 987E and B87F Huh, winding wheel J ewel. balance upper J e wel, balance lower J e wel, balance endstone, upper, Grade 987 Jewel, center, upper, Grade 987 J ewel, center upper, Grades 987E and B87F Jewel, center, lower, Grade 987 J ewel, center,lower, Grade 987E and 987F J ewel, third upper, Grade 987 J ewel, third upper, Grades 9B7E and 987F J ewel, third lower, Grade 987 J ewel, third lower, Grades 987E and B87F Jewel, fourth upper, Grade 9B7 Jewel, fourth upper, Grades 987E and 987F J ewel, fourth lower, Grade 987 Jewel, fourth lower, Grades 987E and987F l ewel, escape upper, Grade 987 J e wel, escape upper, Grades 987E and 987F

Cat. IVo .

2574 2574F

2575 2575F

2012 2379F

2580 2010 2011 2522 2521

2355 2356 2529 2533 2514 2357 2362 2363 2564 2584 2384A 2586 2390 2587 2588 2399 2396 1798 2387 2590 2397 2598 2592 2593 2592

2595 2500 2589 2320 2561 2561A 2525 2527 2526 2366 2545 2548 2550 2552 2541 2542 2507 2516 2508

Cat. IVo.

25UA 233. 2534 2535 2536 2505A 2506A 2319 2515 2565A 2310 5077 2567A 2568A 2569A 2570.<\ 2571A 2572A 2573A 2574A 2575A 2576A 2583 5079

ftfaterial

Jewel, escape or pallet lower, Grade 987 Jewel. escape or pallet lower. Grades 987E and B87F Jewel, pallet upper, unset, Grade 98r Jewel , pallet upper, Grades 98rE and B8rF Jewel, roller Endlltone, balance upper, Grades 987E and 987F Endlltone, balance lower, Grade 987 Stone, pallet, receiving Stone, pallet, discharging Lever, shipper I\faineprjng, Str.12,Grade 087, 987Eand 987F Pollet and Fork Pollet, Fork and Arbor Pinion, cannon Pinion , escape Pinion, winding Regulil t or RoIl er, large Roller , large and jewel pin Roller, small Screw, balance Screw, balance, meantime Screw. case Screw, banking Screw, bridge Screw. balance cock Screw. pallet bridge Screw, setting wheel bridge Screw, hairspring stud Screw, click Screw. dial foot Screw, ratchet wheel Screw, winding wbeel hub Screw, balance upper jewel, Grade 987 Screw. balance lower jewel, Grade 987 Screw. third, fourth or escape, upper jewel Screw, center upper jewel Screw, shipper lever Screw, shipper lever spring Spring. click Spring, bair, Grades 987 and 9B7F Sprins. hair, Grade 987E Spring, shipper lever Stoff, balance Ste lD, winding Stu d, hairspring Wh eel , center and pinion Wheel, third and pinion Wh eel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet Wh eel . intersetting Wheel, winding

GRADE 987A

lIfaterial

Arbor, barrel Arbor. pallet Balance, with screws Balance (with screws) and Stoff Balance, complete Barrel Bal!'rel and Arbor Click Clutcb Collet. hairspring Hub, winding wheel Jewel, balance, upper and lower Jewel, center upper Jew el, center lower, unset Jewe l. third upper J e we l, third lower Jewel, fourth up)Jer Jewel, fourth lower J e we l. escape upper Jewe l, escape lower Jewel. pallet upper Jewel, pallet lower Jewe l, roller E n d a tone Cop, balance upper

Cot. IVo.

5093

5080

2581 2582 2522A 2518 2321 2355 2356 2529 2533 2514A 2357A 2362 2363 2564 2584 2586A 2587A 5094 5095 5088 2590 2397 5096 2598 5092 5096 2500A 2320 2561B 2920 2513A 2527 2526A 2366 2545 2548 2550 2552 2541 2542 2507A 2516A 2508A

Cat. IVo.

2509 2524 2530 2537 2510 2512 5096 2517 6225 2538 2562 2577 2544 2556

Cat. IVo.

2667 2669 2671 2673 2673F 2674 2674F 2675 2676 2621 2633 2663 2698 2696 2652

JUateria'

Endilltone Cap, balance lower, 2 screw holes End.lone Cap, balance lower, screw hole Stone, pallet, r eceiving Stone. pallet. discharging L e ver, setting Lever, clutch M Uinllpring, Str. 12 J.i. refill 214 J' ollet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion, escape Pinion, winding R egulatol!' Roller, la rge Roller, large and jewel pin Roller, small Screw, balance Screw, case Screw, bridge or balance cock Screw, pallet bridge Screw, hairspring stud Screw, click Scr ew, dia.l foot Screw, ratchet wheel Serew, setting cap spring Screw, winding wheel hub Screw, balanCe upper endstone cap Screw, balance lower endstone cap Screw, setting lever Spring, click SI)ring, hair. Elinoar Extra Spring, clutch lever Spring, setting cap Stuff, balance StelD, winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, intersetting Wheel, winding

GRADE 9875

ftfote r ial

Cap, seconds setting Jewel~ center upper Jewel, fourth upper Jewe l, third upper Le ... e r , seconds setting Pin.lon, center seconds and stall' Screw, seconds setting cap Scre w, stabilizer spring Spring, seconds setting lever Spring, st·abilizer Wheel, center seconds Wheel, center, staff and bushing Wheel~ fourth and pinion Wheel. third and pinion

AU Qther procurable parts same as Grade 987 A

GRADE 979

lUaterial

Jewel, center upper Jewel, third upper J e wel, fourth upper Jewel, escape upper, non-friction Jewel, escape upper, friction Jewel, escape lower, non-friction J e we l, escape lower, friction End. tone, escape upper Endetone, escape lower I\fainllpring, S tr. ll}i Pinion, escape Roller, and jewel pin Screw, winding wheel hub Screw, escape lower endstone Wh eel, escape and pinion


27

Cat. No.

4020 4055 4000 4001 4002 4014 4015 4013 4140 4135 4115 4010 4040 4041 4019 4021 4022 4025 4026 4029 4033 4034 4031 4035

Cot. No.

50n 2934 5053 5054 50S5 500S 5006 5013 2319 5015 5065 S079 5080

S093

5010 5077 5067 5068 5068A

5073 5074 5069 5072 5075 5076 5069 5070 2083 5081 5082 5018 5022 5056 5057 5020 5089

5033 5014 5058 2963 5084 2990 5086 5087 5094 5096 2387 5091 5092

28

12/0 SIZE AND l4./0 SIZE MOVEMENTS

GRADE 401 Matedal

Arbor, barrel Arbor, pallet UnlunCfI. with screws Bnlance (with screws) and Staff Bnlauce, complete Darrel Darrel and Arbor Cnp, setting and minute wheel Click C lutc h Collet, ha.irspring Hub, winding wheel Jewel, balance upper Jewel, balance lower Jewel, center upper Jewel. center lower Jewel, third upper Jewel, third lower Jewel, fourth upper Jewel, fourth lower Jewel, intermediate pinion upper Jewel, intermediate pinion lower Jewel, escape upper Jewel, escape lower

GRADE 980 ~latertal

Arbor, barrel Arbor, pallet Dalance, with screws Dalance (with screws) and Stuff Balance. complete Dllrrel Burrel and Al"bor Cap, settJug wheel C lick Clutch Collet, hairspring Endstone Cap, balance upper End.tone CliP, balance lower, before No. GS77001 End,tone Cap, balance lowor, after No. G£77000 nub, winding wheel Jewel, balance upper or lower Jewel, center upper Jewel, center lower, before No. 0370701 Jewel , center lower, unset, after N o. 0370700 Jewel, escape upper Jewel, escape lower Jewel, fourth upper Jewel, fourth lower Jewel, pallet upper Jewel, pallet lower Jewel, third upper Jewel, thIrd lower Jewel, roller Stone, pallet, receiving Stone, pallet, discharging Lever, clutch Lever, settJug Pallet and Fork PIIIJet. Fork and A.rbor Piuion, ca.nnon Pinion, cannon, long, in watches with spherical dial only Pinion, escape Pinion, winding Uegulator Rollel", combination Serew, balance Screw, banking Serew, balance cock Serew, bridge Serew, pallet bridge Screw, setting wheel cap Screw, click Screw, dial foot Serew, balance upper cap

12/0 SIZE MOVEMENTS

Cat. No.

4036 4038 4052 4047 4040 4050 4051 4044 4045 4128 4104 4105 4148 4053 4134 4133 4106 4113 4153 4153A 4160 4155 4154 4156 4176

llJaterial

Jewel, pallet upper Jewel, pallet lower Jewel, roiler Endetone , balance upper Ends lone, ba.lance lower Stone, pallet, receiving Stone, pallet, discha.rging Lever, setting Lever. clutcll Mainepring. Str. 12~ Pallet and Fork }'uIlet, FOl"k and Admr Pinion, cannon Pinion, escape J'inion, winding Pinion, intermediate Regulator Roller. combination. complete Screw, balance Screw, meantime Screw, banking Screw, bridge Screw, case Screw, balance cock Screw, pallet bridge

14/0 SIZE MOVEMENTS

Co,. No.

S096

5085

5000 S096 5096 S09S 5097 5098 2320 S02S 5061 5021 5040 5099 5027 S026 5066 504S 5052 5048 6050 5041 5083

5042 5007 5016 5008

Cat. No.

50SO 5029B 2S29A 5034 5062 2996 5096 5012 5063 5042A 504SB 2S41 5017

Material

Screw, balance lower caP. before No. G£77001 Screw, balance lower cap, after No. GB77000 Screw, setting lever Screw, setting cap spring Screw, setting lever spring Screw, hairspring stud Screw, ratchet wheel Scr ew, winding wheel S I)ring, click Spring, clutch lever Spring, hair, El1nf}ar Extra Spring. main, Str. 11 MM Spl"ing, setting lever Spring, setting cap Staff, balance StelD, winding Stud, hairspring Wheel, center and pinion Wheel, escape and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, hour, regular Wheel, hour, long pipe, in u;atches with spherical dial only Wheel. minute Wheel, ratchet Wheel, setting Wheel, winding

GRADE 980A

ltfaterial

Endstonc Cap, balance lower Pinion, cannon Pinion, minute hand Poet, auxiliary minute wheel Poet, main hand Serew, auxiliary minute wheel spring Screw, jewel, balance lower cap Spring, auxiliary minute wheel Washer, hour\vhcel Wheel, auxiliary minute Wlleel, center and pinion Wbeel, hour Wllee1, minute


Cat . No.

4173 4175 4157 4179 4 174 4166 4159 4171 4170 4141 4142 4116 4111 41S0 4126 4149 4077 4086 4092 4097 4069 4070 4118 4136 4122

Cot. No.

5009 5064 5003 5043 504SB 5000 5017 .soa.

Cae. No.

S036 6080 5037 5030 5033A 5038 5085 50S2A SOO7A 5023 5008A S024

Cut. No.

5078 5093 5036 5080 5037 5039 5033A 5071 5085 5038 5085 SOS2A 5007A 5008A

Material

Screw, setting or minute wheel cap Screw, hairspring stud Screw, click Screw, winding wheel hub Screw, ratchet wheel Screw, center lower jewel Screw, dial foot SCl"ew. clutch lever Screw, setting lever Spring, click Spring, clutch lever Stud, hairspring Spring. hair breguet Staff, balance Stern, winding Washer, winding wheel hub Wheel, center and pinJon Wheel, third and pinJon Wheel, fourth and pinJon Wheel, escape, steel and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, setting Wheel, windiIig

GRADE 980B

ltlateriol

Pinion, cannon Post, main hand Washer. hour wheel Wheel, auxiliary minute Wheel, center and pillion Wheel, hour Wheel, minute Wheel, minute hand


GRADE 982

Jllateriul

Ends tone Cap, escape upper Endetone Cap, escape lower Jewel, escape upper Jewel, escape lower Pinion. escape Screw, escape upper cap Serew, escape lower cap Wheel, escape and pinJon Wheel, ratchet, before No. J8S001 Wheel, ratchet, afler No. J83000 Wheel, winding, before No. J8S001 Wheel, winding, after No. J8S000

All other procurable part.! same as Grade 080

GRADE 982M

ltfatertol

Endetone Cap, balance upper Endetone Cap, balance lower Endetone Cap, escape upper Endetone Cap, escape lower Jewel, escape upper Jewel, escape lower Pinion, escape Regulatol" Screw, balance lower cap SCl"ew, escape upper cap Screw, escape lower cap Wheel, escape and pinion Wheel, ratchet Wheel. winding


18/0 SIZE, 20/0 SIZE AND 21/0 SIZE MOVEMENTS

18/0 SIZE MOVEMENTS

GRADES Cat. Cot. • ..cl No . lUatcriul No. lUateriol

= 989 989E 2780 Endlltone Cap, balance lower 2796 Screw, setting wbeel bridge ~ CO ... ... 2767 Jewel, center upper 2794 Screw, pallet bridge 00 2768 Jewel, center lower 2795 Screw, hairspring stud .... 0 ~ ateriol 2769 J e w el, third or fourth upper 2387 Screw, click

S -= bor, barrel 2770 J ewel , third or fourth lower 2790 Screw, dial foot ... bor, pallet 2773 Jewel, escape upper 2797 Screw, ratchet wheel

~ = Ilanee. with screws, Grade 989 2774 J ewel , escape lower 2998 Screw, winding wheel hub

..Q 0 l ance, with screws, Grade 989E 2975 J ewel , pallet upper 2793 Screw. jewel balance lower ,lance (with screws) and S taff, Grade 2776 J ewel, paUet lower 2700 Screw. setting lever

..Q

= 9 2783 J ewel, rolier 2789 Serew, setting lever spring

CO ,i ance (with screws) and StatT, Grade 2781 Stone, pallet r eceiving 2320 Spring, click .. 0 'E 2782 Stone, pallet diScha:ging 2761 Spring, hair, Grade 989

.~ 2722 Lever, setting 276lE Spring, hair, Grade 989E <SJ ... llance, complete, Grade 989 .... .... 2721 l\1a inll pring, Btr. 87S 2725 Spring, setting lever

00 llance. complete, Grade 989E -= 0 2756 Pallet and Fork 2727 S taff, balance .. ~

lrrel 2757 Pallet, Fork and Arbor 2726 Stern, winding

0 lrrel and Arbor 2729 P inion, cannon 2766 Stud, hairspring .. =

IP, intermediate 2733 Pinion , escape 2745 Wheel, cent-er and pinion

'1:1 .~ ick 2714 l'in;on, winding 2748 Whed, third and pinion utch 2758 R egu lator 2750 W h eel, fourth and pinion

~ ... 2963 Roller, combination, complete 2752 Wheel, escape a.nd pinion -= .... .net, hairspring 2784 Sorew, ba.lance 2741 Wheel , hour

'" I:Jl lib, winding wheel 2784A Scr e w , balance, mea ntime 2742 W h eel, minute CO wei, balance uppel' ... =

2787A Screw, balance cock 2707 Whed, ratchet ... wei. balance lower 2390 Screw. banking 2716 Wheel, intersettIng CO .... ,., tdlltone Cap, balance upper 2787 Screw, bridge 2708 Wheel, winding ~ 0

..Q -= '" 20/0 SIZE MOVEMENTS = = CO CO

'" GRADE 997 Cat. Cat .

'1:1 '1:1 No. Material No. itfoterial

~ = 2975A Jewel, pallet upper 2988 Scr ew. click <IJ CO 'ot.erial

2976A Jewel, pallet lower, unset 2998A Screw, winding wheel hub CO ~ ... lboI', barrel 2983 Jewel, roller 2997 Screw, r atchet wheel - = thor, pallet 2981 Stone, pallet receiving 5096 Sorew, balance lower jewel

f ~ tl ance, with screws 2982 Stone, pallet discharging 5091 Screw, .dial foot

S tl ance (with screws) and StatT 2922 Lever, setting 2900 Screw, setting lever

= ~ u ance, complete 2918 Le .. e r . clutch 2989A Scr ew, clutch lever spring

~ - ,rrel 2921 Mainllpring, Str. 77S 2920 Spring, cUck

-= ~ trrel and Arbor 2956A Pallet. an d Fork 2925 Spring, clutch lever

~ r. k 2957A Pallet , Fork and Arbor 2940 Spring, setting cap ~ = uCtoh 2990A Pin , banldng 2961B Spring, hair, breguet

00 ,lIet, hairspring 2929A Pinion , cannon 2927 St.atT, balance, S.R.

-< ub, winding wheel 2933 Pinion, escape 2926 SteD1., winding

e\I ~ Idatone Cup, balance upper 2914 Pinion, winding 2966A Stud , hairspring

~ -= Idllto ne Cap, balance lower 2958A Regulator 2945B Wheel, center and pinion

10 ... Iwet, balance upper or lower 2963 Roller, combination, complete 2948A Wheel. third and pinion .... lwei, center upper 2984 Screw, balance 2950A Wheel, fourth and pinion

""" 0 2986 Screw, balance cock 2952 Wheel, escape and pinion lwei , center lower, unsct 2992 Screw, balance upper endstone cap 2941A W h eel, hour

0 ,.ioj lwei, tWrd or fourth upper 2987 Screw, barrel or train bridge 2942 Wheel, minute

'" !wel , third or fourth lower, unset 2994 Scrcw, pallet bridge 2916 Wheel, intermed1ate

~ C'l lwei , escape upper 2996 Screw, setting cap spring 2908A Wheel, winding ..Q lweI, escape lower, unset 2995 Screw, hairspring stud 2907A Wheel, ratchet

Eo< ~ ~

-= 21/0 SIZE MOVEMENTS ~ .. ::s = ~ 0 GRADE 721 Cat, Cat .

~ No. !tlateria l No. !tftHeri(ll

Q., ~ rho follOwing parts for Grade 721 a" 2967 Jewel, center upper 5096 Screw, balance lower endstone caP .... not interchangeable with those in th. 2968A Jewel, center lower, unset 2986 Screw, balance COCk Q., ,., ... 995 or 995A movements: 2969 Jewel, third upper 2987 Screw, bridge, barrel or train

j;;) <SJ 2970A J ewel, third lower, unset 2994 Screw, pallet bridge

rFJ '1:1 iVheel, center, and pinion ; Wheel, third, 2969 Jewel , fourth upper 2988 Screw, click 2970A Jewel. fourth lower, unset 2790 Screw, dial foot

~ ~ and pinion; Wheel. fourth, aud pin- 2973 J cwel, escape upper 2900 Screw, setting lever

S ion; Wheel, escape, and pinion. 2974A Jewel, escape lower, unset 6295 Screw, hairspring stud 0 S 6275 J ewel, pallet upper Or lower, unset 2989A Scr ew, clutch lever spring

~ laterial 2983 J ewel, roller 5090 Screw, setting cap spring

-< = 2981 Stone, pallet. recelvi.ng 2997 Screw, ratchet wheel I:Jl rhoI', barrel 2982 Stone, pallet, dIscharging 2998A Screw, winding wheel

Eo< rhor. pallet 2918 Lever , clutch 2920 Spring, click

-< I:Jl aiance. with screws 2922 Lever, setting 2925 Spring, clutch lever

1;..1 = IIlance (with screws) and StafT 2921 Mainsp rin g, Str. 7 ~ MM. 3261 Spring, hair, Elinf!ar Extra .... a lance, complete 2956 Pallet and Fork 2940 Spring. setting cap IIr r el 2957A PaBet. Fork and Arbor 3227 Staff, balance 9.l' r e l and Arbor 2990A Pin . banking 2926 StenI, ,vinding lic k 2929A Pinion, cannon 3266 Stud. hairspring lutc h 3233 Pinion, escape 3245 Wheel. center and pinion DUet 2914 Pinion, winding 3248 Wheel, third and pinion ub, winding wheel 6258 Regulator 3250 Wheel, fourt.h and pinion nduone Cap, balance upper 2963 Roller, combination 3252 W h eel, escape and pinion nd llton e Ca p, balance lower 2984 Screw, balance 2941A Wheel, hour ~wel. balance upper or lower, unset 2992 Screw, balance upper endstone cap 2942 Wheel, minute

29

18/0 SIZE, 20/0 SIZE AND 21/0 SIZE MOVEMENTS

Cat. No.

2711 2734 2753 2753E 2754

2754E

2755 2755E 2705 2706 2713 2319 2715 5065 2710 2777 2778 2779

Cat. No.

2911 2934 2953A 2954A 2955B 2905A 2906A 2919 2915 2965 5010 2979A 2980A 2977A 2967A 2968A 2969A 2970A 2973A 2974A

GRADES

989 989E

Jllaterial

Arbor, barrel Arbor. pallet Balance, with screws, Grade 989 Balance, with screws, Grade 080E Balance (with screws) and Staff, Grade 989 Balanee (with screws) and StatT, Grade OBOE Balance, complete, Grade 989 Balance, complete, Grade OB9E Barrel Barrel and Arbor Cap, intermediate Click Clutch Collet, hairspring Hub, winding wheel Jewel, balance upper Jewel, balance lower Ends tone Cap, balance upper

GRADE 997

.Material

Arbor, barrel Arbor, pallet Balance, with screws Balance (with screws) and Staff Balance, complete Barrel Barrel and Arbor Click Clutch Collet, hairspring Hub. winding wheel Endstone Cap, balance upper Endstone Cap, balance lower Jewel, ba.lance upper or lower Jewel , center upper Jewel, center lower. unset Jewel, third or fourth upper Jewel, third or fourth lower, unset Jewel, escape upper Jewel, escape lower, unset

GRADE 721 Caution: The following parts for Grade 721 are

not interchangeable with those in the 995 or 995A movements:

Cat. No.

2911 2934 2953A 3254 3255 2905A 2906A 2919 2915 2965 5010 2979A 3280 6278

Wheel, center, and pinion; Wheel, third, and pinion; Wheel, fourth, and pinion; ' Vheel, escape, and pinion.

Material

Arbor, barrel Arbor, pallet Dalance, with screws Balance (with screws) and Stuff Balance, complete Barrel Barrel and Arbor Click Clutch Collet Hub. winding wheel Endstone Cap, balance upper Endstone Cap, balance lower Jewel , balance upper or lower, unset

18/0 SIZE MOVEMENTS

Cat. No. .Material

2780 2767 2768 2769 2770 2773 2774 2975 2776 2783 2781 2782 2722 2721 2756 2757 2729 2733 2714 2758 2963 2784 2784A 2787A 2390 2787

Endstone Cap, balance lower Jewel , center upper Jewel, center lower Jewel, third or fourth upper Jewel, third or fourth lower Jewel, escape upper Jewel, escape lower Jewel, pallet upper Jewel, pallet lower Jewel, roller Stone, pallet r eceiving Stone, pallet discharging Level', setting . Mainspdng, Str. 872 Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion , escape Pinion, winding Regulator Roller, combination, complete Screw. balance Screw, balance, meantime Screw, balance cock Screw, banking Screw, bridge

20/0 SIZE MOVEMENTS

Cat. No.

2975A 2976A 2983 2981 2982 2922 291S 2921 295M. 2957A 2990A 2929A 2933 2914 2958A 2963 2984 2986 2992 2987 2994 2996 2995

lUaterial

Jewel, pallet upper Jewel, pallet lower, unset Jewel, roller Stone, pallet receiving Stonc, pallet discharging Lever, setting Level', clutch Mainspring, Str. 731 Pallet and Fork Pallet, Fork and Arhor Pin, banking Pinion, cannon Pinion, escape Pinion, winding Regulator Roller, combination, complete Screw, balance Screw. balance cock Screw. balance upper endstone cap Screw, barrel or train bridge Scrcw, pallet bridge Screw, setting cap spring Screw. hairspring stud

21/0 SIZE MOVEMENTS

Cat. No.

2967 2968A 2969 2970A 2969 2970A 2973 2974A 6275 2983 2981 2982 2918 2922 2921 2950 2957A 2990A 2929A 3233 2914 6258 2963 2984 2992

Material

Jewel, center upper Jewel, center lower, unset Jewel, third upper Jewel, third lower, unset Jewel, fourth upper Jewel, fourth lower, unset Jewel, escape upper Jewel, escape lower, unset Jewel, pallet upper or lower, unset Jewel, roller Stone, pallet, receiving Stone, pallet. discharging Lever, clutch Level', setting Mainspring, Str. 7;1 }vIM. Pallet and Fork Pallet, Fork and Arbor Pin, banking Pinion, cannon l~inion, escape Pinion, winding Regulator Roller, combination Screw, balance Screw, balance upper endstone cap

Cat. No.

2796 2794 2795 2387 2790 2797 2998 2793 2700 2789 2320 2761 2761E 2725 2727 2720 2766 2745 2748 2750 2752 2741 2742 2707 2716 2708

Cat. No.

2988 2998A 2997 5096 5091 2900 29S9A 2920 2925 2940 2961B 2927 2926 2966A 2945B 2948A 2950A 2952 2941A 2942 2910 2908A 2907A

Cat. No.

5096 2986 2987 2994 2988 2790 2900 6295 2989A 5096 2997 2998A 2920 2925 3261 2940 3227 2926 3266 3245 3248 3250 3252 2941A 2942

Material

Screw, setting wheel bridge Screw, pallet bridge Screw, hairspring stud Screw, click Screw, dial foot Screw, ratchet wheel Scr ew, winding wheel hub Screw, jewel balance lower Serew, setting lever Screw, setting lever spring Spring, click Spring, hair, Grade 989 Spring, hair, Grade 989E Spring, setting lever Staff, balance SteD"l, winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Whed, hour Wheel, minut-e Wheel . ratchet Wheel, intersetting Wheel, winding

Material

Screw. click Screw, winding wheel hub Screw, ratchet wheel Screw, balance lower jewel Screw, ,dial foot Screw, setting lever Screw, clutch lever spring Spring, click Spring, clutch lever Spring, setting cap Spring, hair, breguet Staff, balance, S.R. StelD, winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, intermediate Wheel, winding Wheel, ratchet

Material

SCl"eW, balance lower endstone cap Screw, balance cock Screw, bridge, ban·el or train Screw, pallet bridge Screw, click Screw, dial foot Screw, setting lever Screw, hairspring stud Screw, clutch lever spring Screw, sett,ing cap spring Screw, ratchet wheel Screw, winding wheel Spring, cl.ick Spring, clutch lever Spring. hair, ElinTJ ar Extra Spring, setting cap Stuff, balance SteIn, winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel. minute

29

21/0 SIZE AND 22/0 SIZE MOVEMENTS

Cat. No.

2907A 2916 2908A

""aterial

Wheel , ratchet Wheel, settJng Wheel, winding

GRADE 995 Cuution: 1'bo follow[ng parts for Grades 995 and

995A are not interchangeable with thoso ill Grade 721:

Cat. No.

2911 2934 2953A 2954 2955 2905 2906 2919 2915 2965 2910 2979 2980 2977 2978 2967 2968 2969

Cat. No.

0211 2934 6253 6254 0255 6205 6206 6219 6215 2965 6276

6279

6210 6267 6268 6269 6270 6273 6274

30

Wheel, center, and pinion; WbeeI, third, and pinion; Wheel, fourth , and pin· ion; Wheel, escape, and p inion.

""aterial

Arbor, barrel Arbor, pallot Dulance, w:[t.h screws Balance (wit.h screws) and Staff Balance, complete Burrel Darrel and Arbor Click Clutch Collet, hairspring 1-1 u b, winding wheel Endstone Cup, balance upper Endstone Cap, balance lower Jewel, balance upper Jewel, balance lower Jewel , center upper Jewel, center lower Jewel, third or fourth upper

GRADES

911 911M

""aterial

Arbor, barrel Arbor, pallet Balance, with screws Dnlance (with screws) and Stuff Balance, complete Barrel Dar rel and Arbor Click Clutch Collet, h airspring Endstone Cap, balance upper, Grade Sl1M Endstone Cap, balance lower, Grade S11M Hub, winding wheel Jewel, center upper Jewe l . center lower Jewcl, third or fourth upper Jewel, third or fourth lower Jewel, escape upper Jewel, escape lower

ALWAYS USE

21/0 SIZE MOVEMENTS

Cat. No.

2970 2972 2973 2974 2975 2976 2983 298 1 2982 2922 2918 2921 2956 2957 2929 2933 2914 2958 2963 2984 2992 2990 2986 2987 2994 2996 2995 2988 2998 2997 2993 2790 2000 2989A 2920 2925 2940

Material

Jewel, tblrd lower Jewel, fourth lowor Jewel, escape upper Jewel, oscape lower Jewel, pallet upper Jewel, pallet lower Jewel, roller Stone, paUet, receiving Stone, pallet. discharging Lever, setting Lever, clutch MuiDSI)ring, Str. 77i Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion, escape Pinion, wInding R egulntor Uoller, combination, complete Screw, balance Screw, balance upper endstOllO cap Scre w, ba.nking Screw, balance cock Screw, barrel or train bridge Scre w, pallet bridge Screw, setting cap spring Screw, hairspring stud Screw, click Screw, winding wheel hub Screw, ratchet wheel Screw, balance lower jewel cap Screw, dial foot Screw, setting lever Screw, clutch lever spring Spring, click Spring, clutch lever Spring, sotting cap

22/0 SIZE MOVEMENTS

Cat. No.

6275 6277

6278

2983 2981 2982 6218 6217 6222 6221 2956 2957A 2990A 6229 6233 6214 6258 6259 2963 6284 2992 5085 6286 6288

lUaterial

Jewel, pallet upper or lower Jewel, balance upper or lower. before NQ. T:;JI001 Jewel, balance upper or lower, unset, af ter No. TSlOOa J e wel, roller Stone, pallet, receiving Stone, pa.llet, discharging Lever, clutch, Grade 911 Lever, clutch. Grade 9llA! Le .. er. setting Mainspr ing, Str. 6M Pollet and Fork Pallet, Fork and Arbor Pin, banking Pinion , cannon Pinion, escape Pinion, winding Regulator, Grade 911 Regulator, Grade B11M Roller, combination, complete Sclew, balance Screw, balance upper cap Screw, balance lower cap Screw, bridge or balance cock Screw, click, Grade 911

GENUINE HAMILTON

Cat. No.

2901 2927 2926 2966 2945 2948 2950 2952 2941A 2942 2916 2908 2907

Cat. No.

2955B 5010 2979A 2980A 2977A 2929A 2958A 2998A 5090 2989A 2961A 3266 2945A 2941A 2908A 2907A

Cat. No.

6287 6291 6295 2994 6288 5096 6300 6298 6220 6225 6240 6239 6261 5027 5027A 6226 6266 6245 6248 6250 6252 6241 6242 6216 6207 6208

Materia'

Spring, hair, breguet Staff, balance Stem., winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel , ntinute Wheel, intermediate Wheel, winding Wheel, ratchet

GRADE 995A

it/ale rial

Dalance, complete Hub, winding wheel Ends tone Cup, balance upper Endstone Cap, balance lower Jewel, balance hole, upper or lower Pin.i o n, cannon Regulator Screw, winding wheel hub Screw, balance lower jewel Cap Sc:re w, clutch lever spring Spring, hair, breguet Stud, hairspring Wheel , center and pinion Wheel, hour Wheel, winding Wheel, ratchet

All other procurable parts same as Grade BSo

Material

Screw, click, Grade Bll1v[ Scrow, dJal foot Screw, hairspring stud Screw, pallet bridge Screw, ratchet wbeel Screw, setting cap spring Screw, setting lever Screw, winding whoal hub Spring, click Spring, clutch lever Spring, setting cap, Grade 91 1 Spring, setting cap, Grade DI1M Spring, hair, Elinvar Extra Staff, balance, before No. TSIOOl Staff, balance. after No. T SIOOO SteUl, winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wh eel, escape and plnJon Wheel, hour Wheel, minute Whee l, setting Wheel, ratchet Wbeel, winding

MATE RIAL

MAINSPRING CHART

Al ways order H amil ton JVl ain sprlngs by Catalog Num ber and Strength . Use lhe fig ure und er th e " Mil limeter-St rength" Column to indicaLc desired s tr ength, l\-l a insprings identified by two different Catalog Num bers 'may be procured by using either number.

C nln log Mi llin, c ter De nni l'lo n Le n g th I nc h e ",

Cutn lo g Milli m e Ie r ])" lIni .. o " No. S lr c n gt h " l idl" Stre ngth W idth

14

15 15

l' 232

3 17

3 17 } 318 3 17 318 534 534 5:14

534 534 534B 534B 534n

30 28

18 X 20 20 .% 2 1 ~

18

17

18

Hl 19 X

" 15 Y!j 16 16 » 17 15 15 M 16

17

l 8

13 SIZE MOVEMENTS

3.18 2.87 2.87 2.87 3. 18

23 10 19 19 22

16 S IZE MOVEMENTS

2.83

2. 83

2.83 2.83 2.83 2.Sa 2.83 2. 83 2.83 3.00 3.00 3.00

o 5

4

3li 7

7

19

19

19 19 19 19 19 19 19 2 l 21 2 l

12 S IZE NIOVEMENTS

1. 72 8

1. 72 5 h 8

J .72 8

25 }i 2 1 }i

21 7;( 2 1M 25M

2 1 J4

21U

2 1 7.( 213-:( 20~

20 U 20 ~

20 N 20 ~:(

23 72" 23 72 23 X

2 1 Y.i

217.(

~f.B .

T T T

)"r.13.

T

T

'1 '

T l\ 1.B. )'1.B. M.B . M.B . ),'1.B . ?'l.B. ] d . n .

M.B.

M. B.

) 'l .B.

No . S lr<'u g Lh Wid,1o S lre " g l lo ,Vitilio

1535 1530 1536

172 1 192 1 232 1 252 1 262 1 262 1

4128

502 1 5021

272 1 272 1 272 1

} 13 ~

12 U 12 J1 ~ 1 1

12 M

11 JI }"2

8 8)1 o

o SIZE MOVEMENTS

1.38 1.38 1.38

7)1 7 ;1 7

6/0 SIZE MOVEMENTS

1.34

1.34 1.34 1.34 1.3 4

• 5 5 5

• 12/0 SIZE iVlOVEMJ<:NTS

1.1 8

14/0 SIZE MOVEMENTS

1.30 1.30

10 9U

4 4

18/0 SIZE MOVEMENTS

1.1 2 1.1 2 1. 12

13 12 .J..<:/ 12

2 2 2

Le ngth In c h e ..

" 14l!4 14U

10

Un 11 )1 1l J.<./ 11 %

14 ]4

I I ]4 II

ll U 10 li 10li

1228

1 1228 3028 1228 3028 20/0 AND 21 /0 SIZE MOVEMENTS

3328

6021 602 1 6021

16

16 17 l8

12 (THIN) S IZE :'I'IOVJ,~'lENTS

1 .34 5

10 SIZE MOVEMENTS

1.50 1. 50 1.50

G» " 5

5 5 5

1 8 ~

17 li 17.!4 17U

h-J . B.

~LB.

1.1 .0 . :M.B.

2H2 1 2921 2921 292 1 2H2 1 2921

6221 622 1 622 1

6 J.<.! 7 7 )1 8 8» 9

G 6 .k; 7

l.00 1..00 l.00 l.00 1.00 1.00

14 71 l4 13 )..1 13 12 7:j 12

22/0 SIZE MOVEMENTS

lAO l A O l A O

15 14 }:; 14

5 5 5

ALWAYS USE GENU I NE HAMILTON MATERIAL

I l U IOU 9U 9 8)1 8

8li 7li 7 U

St y l e Br:.ec

NU l. T T

T

T T T T

),1. B . M .B.

T T T

M.B . :M.ll. Al.B. M .B. ) LB. l\J . B .

M.B . M .B. ·M. O.

3J

18 SIZE

529

535

39

E4

32

HAMILTON WATCH DIAL STYLES

HAMILTON WATCH DIALS Dials for every size and grade Hamilton Watch are avai lable for replacement purposes. The dials illustrated do not represent the complete selection of styles available for any given grade or size; t hey are however, representative of the several different designs available. See pages 34, 35, 36 and 37 for complete listing. Orders for dials should employ the catalogue number and, whenever possible, the model name of the watch. When dial identity is impossible or difficul t send old dial which will be matched as nearly as possible from QUI' inventory.

16 SIZE

537 536 502M

/ujQ /'0

:9 L

38 62 50

10 SIZE

.·A(~··{ .. , ,

·fi~ 2\ :I§> 3~

-_8.a.~·-~~~~G'"

EI E I 6 E2

JlIl~ 'f£!

.,,,,,,-

D

H041 H070

053 050 041

D9 D10

D61 D62

r>

M !2 ! 0 "· a

DOS9

:I:

~

~~ ~!l? ~ """,t""" 22

-0 :1

r~ ~ ~. 5

046 052 012

0111 0112 01

fJ.JjJ0 :l\

'J!, 1 0 5

D008

U 1'1l ~ no :2 "> 0 :!

~ H : D53

In C! u 10 """'" :2 t) 0 ~

() !Hi Jil '1 .~ 0 5

D47

HAMILTON WATCH DIALS

6/0 SIZE

058'B 058A 058

0106A 0106

14/0 SIZE

D41 D42

D29

0

D65 D62 D61

11/1 ~ ~

'''";* ~ j , ~

0

0118 098 097

0143 0145 0144

DOlO D021

!P "

ft~ 12 t o -." .. , 2

, '0 :}

J!, 'l 0 5.

DOll

• • .. ~,. • ~ ~ 10

,~ • • •

D93 D96

,

~Q~ IJ!) "".,~ ~

Uti! I? t:i 5 "

0113 0108 0107

0153

D3 D4

D70 D98

12 _ ......... 0

D026 D033

Il

~

33

Fl5 Fll

(J;r;l ['! ~~-~ - . o >

rp] . c ~)

C38 COl3

C034 C72 C066 C025

m m <- , o ,

• . ~ " G12 G043

GOl5 G4

34

HAMILTON WATCH DIALS

Fl2

~p;1; !

o , • • . .,,, C42 C50

~ ,,12-, 10--..... 2 9 0 ' • 4 76 ;

C7

i"~ .

Foo . Ie . • Ih: '" •

GOO3

G002

2010 SIZE

21/0 SIZE

I~ ~ 0 ~ . . • • •

C5l

C17

22/0 SIZE

G6

\ " I , - /

- 0 -/ ,

I VI \

G37

~""~' ",- . • 0 » \~

F14

~ C040

Jf0~1~

tJ , C

C3

R -. o • . " \7 r~ ~

G020

[1O·1L~ ' " 0 "I ta .s L:...!..:.i

G063

F5 Fl7

~ fj!'l ~ -.,- 1i, JJ 0 :1 l'L.~.!fo.7

C70 C20 C4l

~., 10·····- zi

t<;l 0 3~

~ 4f 7~

Cl9 C25 C48

~ 8 ~; C G9 GlO

G2 Gl

___________________ D_E_T_A_I_LE_D __ D_I_A_L_D_E_S_C_RI __ P_T_IO_N_S _____________ ~

Number Model

18 529- Round

16 505 Round 507 Round 508 Round 510 Round 511 Round 512 Round 525 Round 530 Round 531 Round 535* Round 536- Round 537- Round 50-024 Round 50-080 Round 50-081 Round 50-082 Round 50-084 Round 50-090 Round 502M- Round 519M Round 67 Round 69 Round 96 Round 97 Round

12 15 Round 3AR Round 24 Round 38- Round 39- Round 47 Round 50- Round 51 Round 62- Round 62A Round 67A Round 69A Round

Glossary of Abbreviations

A.G.N.-Applied Gold Numerals

A.G.M.-Applied Gold Markers

A.R.N.-Applied Rhodium Numerals

B.F.-Black Figures

Lum.-Luminous Figures

W.F.-White Figures

B.M.-Blind Man Numerical

Description

L.A.-Light Arabic

D.S.-Double Sunk

S.S.-8ingle Sunk

S.A.-8trong Arabic

C.P.-Canadian Pacific

H.G.-Heavy Got.hic

H .A.-Heavy Arabic

Number Model Description

SIZE (GRADE 400)

B.F. Silver 14B Round B.F. Silver 59B Round A.G.N. Silver

SIZE B.M., S.S. Enamel 10 SIZE L.A., D.S. Enamel L.A., S.S. Enamel EI- Round B.F. Silver

S.A., S.S. Enamel E2- Round A.a.N. Silver

B.A., D.S. Enamel E3 Round A.G.M. Silver

B.A., S.S. Enamel E4* Round B.F. Silver

C.P., D.S. 24 Hour Enamel E6 Round B.F. Silver

S.A., D.S. Enamel E7 Round A.C.N. Silver

C.P., S.S. Enamel EI3 Round A.C.N. Silver

D.S. Enamel 23J Rly . Spec. E14 Round E tched Two Tone

H.G., D.S. Enamel Rly. Spec. EI5 Round E tched Coral

Numerical D.S. Enamel Rly. Spec. E16* Blaine A.a.N. Rhodium

H.A'J S.S. Numerical Enamel E044 Elton-H ardy A.O.N. Silver

H.G., S.S. Enamel E045 Hale A.G.N. Silver

B.M'J S.S. Enamel E046 Jefferson B.F. Gilt

B.M'J S.S. Enamel E047 Stanley Etched Silver

B.M'J S.S. Enamel E048 Elton-Hardy B.F. Silver

B.M., S.S. 24 Hour Enamel E049 Morris Etched Silver

H.A. Silver E07l Elton A.R.N. Coral

H.G. Silver E073 Stanley Etched Coral

H.G. Silver H.G. Silver -H.O. Silver 0 SIZE H.O. Silver

1554 Round L.A. Enamel

SIZE B.F. Silver 6/0 SIZE A.G.N. Silver A.G.N. Silver 070 Grade 986A B.F. Silver B.F. Silver 073 Grade 986A B.F. Silver B.F. Silver 078 Grade 986A Lum. Silver Etched Silver 078A Grade 986A B.F. Silver A.G.N. Silver 081 Grade 986A Lurn. Silver A.G.N. Silver 082 Grade 986A B.F. Silver A.G.N. Silver 083 Grade 986A B.F. Silver Secometer Bit 084 Grade 986A Lurn. Silver B.F. Silver OllA Barrel B.F. Silver B.F. Silver 0\3A Ova.l B.F. Silver

*Shown on dial illustra.tlon pages

,

DETAILED DIAL DESCRIPTIONS

Number Model Description Number Model Description

016 Piping Rock B.F. Silver 099 Scott A.G.N. Silver 017A Hastings B.F. Silver 0102 Drake A.G.N. Silver 018A Square B B.F. Silver 0106- Prescott A.G.N. Silver 021 Coronado B.F. Silver 0108- Mason A.G.N. Silver 027A Langley RF. Silver 0112- Cushion A.G.N. Silver 029A Capt. Rice B.F. Silver 0114 Turner A.G.M . Silver 035A Oakmont-- B.F. Silver 0116 Winslow A.G.N. Silver

Meadowbrook 0121 Watson A.C.N. Silver 040 Chatelaine B.F. Silver 0123 Turner B,F. Silver 046 Tonneau B.F. Silver 0123A Turner A.G.N. Silver 049A Whitney B.F. Silver 0125 Morley A.G.N. Silver 053- Greenwich B.F. Silver 0127 Lawrence A.G.N. Silver 055 Raleigh B.F. Silver 0129 Heyward A.G.N. Silver 056 Gladstone B.F. Silver 0131 Merritt A.G.N. Silver 058- Clinton B.F. Silver 0133 Sidney A.G.N. Silver 059 Perry B .F. Silver 0135 Harris A.G.N. Silver 063 ¥lebster B.F. Silver 0137 Reagan A.G.N. Silver 066 Mt. Vernon B.F. Silver 0139 Dodson A.G.N. Silver 068A Putnam B.F. Silver 0143- Endicott A.G.N. Silver 094A Grant B.F. Silver 0146 Medwick A.G.N. Silver 096A Lee B.F. Silver 0148 Bagley A.G.N. Silver 0103 Drake B.F. Silver 0150 Russell A.G.N. Silver 0105 Scott B.F. Silver H031 Douglas A.R.N. Cor.1 0106A- Prescott B.F. Silver H04I- Martin A.a.N. Silver 0110 Square B.F. Silver H062 Russell Etched Gilt 0111- Cushion B.F. Silver H070- Martin A.R.N. Coral 0113" Mason B.F. Silver H095 Vancott A.G.N. Silver 0115 Turner B.F. Silver 01- Cushion Lum. Silver 0117 Ellsworth B.F. Silver 07 Square Lum. Silver 0118" Dixon B.F. Silver 011 Barrel Lum. Silver 0120 Randolph B.F. Gilt 012- Tonneau Lum. Silver 0123A Turner B.F. Silver 013 Oval Lum. Silver 0124 Watson B.F. Silver 017 Hastings Lum. Silver 0126 Morley B.F. Silver 018 Square B Lum. Silver 0128 Lawrence B.F. Silver 026 Gladstone Lum. Silver 0130 Heyward B.F. Silver 027 Langley Lum. Silver 0132 Merritt B.F. Silver 029 Capt. Rice Lum. Silver 0134 Sidney B.F. Silver 031 Raleigh Lum. Silver 0136 Harris B.F. Silver 035 Oakmont Lum. Silver 0138 Reagan B.F. Silver 041- Greenwich Lum. Silver 0140 Dodson B.F. Silver 045 Perry Lum. Silver 0144* Endicott B.F. Silver 049 Whitney Lum. Silver 0147 Med'\\ick B.F. Silver 058A- Clinton Lum. Silver 0149 Bagley B.F. Silver 062 Webster Lum. Silver 0151 Russell B.F. Two-Tone 068 Putnam Lum. Silver 0152 Endicott B.F. Two-Tone H089 Sentinel Lum. Silver 0153- Sentinel (Secomeler) B.F. Silver 094 Grant Lum. Silver H023 Sentinel (Secometer) B.F. Silver 096 Lee Lum. Silver H055 Russell Etched Coral 097- Dixon Lum. Silver H038 Round W.F. Bl.ck 0100 Scott Lum. Silver 033 Langley A.G.N. Silver 0101 Drake Lum. Silver 047 Oakmont A.G.N. Silver 0107- Mason Lum. Silver 050- Greenwich A.G.N. Silver 0145" Endicott Lum. Silver 051 Perry A.G.N. Silver 052- Tonneau A.G.N. Silver 057 Square B A.G.N. Silver 12/0 SIZE 060 Webster A.G.N. Silver 061 Capt. Rice A.G.N. Silver 1201 Wilkinson Lum. Silver 090 Putnam A.G.N. Silver 1202 Byrd Lum. Silver 092 Whitney A.a.N. Silver 1203A Andrew B.F. Silver C:I 093 Grant A.a.N. Silver 1204 Stanley Lum. Silver 095 Lee A.G.N. Silver 1204A Stanley B.F. Silver aI 098- Dixon A.G.N. Silver 1205 Stanley A.a.N. Silver

*Shown on dial illustration pages ttl a.

36 E:I


Number Model Description Number lI10del Description

1206 Livingston A.G.M. Silver D65* Brock B.F. Gilt 1208 Wilkinson A.G.N. Silver D66 Foster A.a.N. Silver 1209 Byrd A.C.N. Silver D67 Winthrop A.a.N. Silver

D6S Wilshire B.F. Coral D69 Winthrop B.F. Coral and Gilt D70* Ross A.G.N. Silver

:iii 14/0 SIZE D71 Wilshire A.a.N. Silver

~ D72 Wilshire B.F. Gilt

DI Sherwood B.F. Silver D73 Ross B.F. Coral D2 Sherwood A.C.N. Silver D74 Winthrop B.F. Coral D3* Custer B.F. Silver D75 Ross B.F. Coral D4' Custer A.G.N. Silver D79 Stanford A.G.N. Silver D5 Ardmore A.a.M. Silver D30 Judson A.G.N. Silver D6 Wayne A.a.N. Silver D81 Judson B.F. Gilt D7 Ca.lvin B.F. Silver D82 Vincent A.a.N. Silver D9* Nelson B.F. Silver D83 Touraine Num. & Dots Silver DlO' Nelson A.a.N. Silver D85 Brock B.F. Gilt Dli Carson B.F. Silver D87 Essex A.G.N. Silver

=a DI2 Carson A.a.N. Silver D88 Seckron B.F. Silver DI3 Bartlett A.a.M. Silver D89 Seckron W.F. Black Dl4 Lowell A.G.N. Silver D90 Boulton A.G.N. Silver Dl5 Rutledge A.G.N. Silver D91 Paige A.G.N. Silver Dl6 Richmond A.G.N. Silver D92 Paige Gilt Two Tone D17 Boone A.G.N. Silver D93* Midas Dot & Bar Silver DIS Cabot A.O.N. Silver D94 Ross Coral and Chrome Dl9 Seckron B.F. Silver D96* Midas Dot & Bar Coral D20 Boone B.F. Gilt D97 Essex A.G.N. Coral D21 Cabot B.F. Silver D98' Ross A.G.N. Coral D22 Seckron W.F. Black D99 Wilshire A.G.N. Coral D24 Cabot B.F. Silver D096 Rodney B.F. Gilt

E D25 Cabot B.F. Green DOOS' Myron A. O.N. Silver D26 Custer A.G.M. Silver DOlO' Lester A.O.N. Silver D27 Clark A.G.N. Silver DOll' Barry A.G.N. Silver D28 Clark B.F. Silver D021' Lester B.F. Silver D29' Pierre A.G.N. Silver D026' Norman Dot & N urn. Silver D30 Dorsey B.F. Silver D028 Gilbert A.G.N. Silver D31 Dorsey B.F. Gilt D029 Lexington W.F. Black D32 Taylor A.G.M. Silver D033' Norman B.F. Gilt D33 Taylor B.F. Silver D036 Gordon Dot & Bar Silver D34 Dorsey A.G.N. Silver D037 Wesley Num. & Dot Silver D39 Carlisle B.F. Silver D038 Donald A.G.N. Silver D40 Carlisle A.G.N. Silver D039' Alan A.G.N. Silver D41' Sutton A.G.N. Silver D06S Rodney B.F. Coral

t D42' Sutton B.F. Silver D069 Myron A.G.N. Coral D43 Dickens A.O.N. Silver D45 Elliott A.O.N. Silver D46 Elliott B.F. Silver

iEI D47' Talbott A.G.N. Silver 18/0 SIZE D48 Cameron A.G.N. Silver

iEI D49 Ardmore A.G.N. Silver Bl Chevy Chase B.F. Silver D51 Bentley A.G.N. Silver B4 Portia B.F. Silver iEI D52 Langford A.G.N. Silver B5 Portia B.F. Silver D53' Gilman A.G.N. Silver B6 Eugenie A.G.N. Silver D54 Brooke A.G.N. Silver B7 Montour B.F. Silver D55 Brooke B.F. Silver

D56 Allison A.G.N. Silver BS Victoria B.F. Silver

D57 Contour A.C.N. Silver B9 Diane B.F. Silver

D58 Linwood A.O.N. Silver BIO Wellesley B.F. Silver D59 Otis A.C.N. Silver BI3 Edgewood B.F. Silver D60 Otis A.G.N. Black BI5 Bancroft B.F. Silver D61' Dunkirk A.G.N. Black BI6 Linden Hall B.F. Silver D62* Dunkirk A.O.N. Silver Bl7 Bryn Mawr RF. Silver D84 Bowman A.O.N. Silver BI8 Sargent RF. Silver

*Sbown on dial Hlustration pages

37


Number Model Description. Number /UQdel Description

BIg Suffolk B.F. Silver C24 Sylvian B.F. Silver B20 Bryn Mawr A.G.N. Silver C25 Vilma B.F. Silver B21 Millay B.F. Silver C28 Anitra B.F. Silver B23 Gail RF. Silver C29 Lois RF. Silver B24 Joan RF. Silver C30 Claire B.F. Silver B25 Beatrice RF. Silver C31 Marcia. B.F. Silver B26 Barbara B.F. Silver C32 Suzanne B.F. Silver B27 Emily B.F. Silver C33 Frieda B.F. Silver B28 Devon RF. Silver C35 Selena RF. Silver B29 Berkely B.F. Silver C36 Vilma. B.F. Silver B31 Berkely B.F. Silver C37 Constance Etched Silver B33 Devon B.F. Silver C38- Melodie Etched Silver B34 Norfolk A.C.N. Silver C39 Elinor B.F. Silver

C41- Martha. Etched Silver 042" Vera B.F. Silver 043 Marietta. Etched Silver

20/0 SIZE C44 Anitra RF. Silver C45 Dorian B.F. Silver

CF2 Audrey Etched Silver 046 Langtry B.F. Silver CF3 Maxine Etched Silver C47 Christina B.F. Silver F2 Lucille B.F. Silver C48- Sonya A.G.N. Silver F3 Audrey B.F. Silver 049 Lois A.G.N. Silver F4 Muriel RF. Silver C50- Vera A. G.N. Silver F5- Eileen B.F. Silver C51- Marlyn A.G.N. Silver F7 Paula. B.F. Silver C52 Estine A.a.N. Silver F8 Ma.xine B.F. Silver C53 Melita A.G.N. Silver F9 Winona B.F. Silver C54 Rhoda A.G.N. Silver FlO Celia Etched Silver C55 Trilby A.G.N. Silver Fll'" Winona Etched Silver C56 Suzanne A.G.N. Silver F12· Muriel Etched Silver C57 Georgia. A.G.N. Silver FI3 Lucille Etched Silver C59 Cora A.G.N. Silver F14- Diane Etched Silver COO Lady Lancaster RF. Silver F15- Margot Etched Silver C61 Lady Lancaster RF. Silver F16- Leta Etched Silver C62 Evalyn A.G.N. Silver F17- Leta Etched Black C64 Julie A.G.N. Silver FI8 Felecia B.F. Gilt C65 Rita Gilt & Black FI9 Felecia RF. Silver C66 Sarah B.F. Silver

C67 Julie B.F. Coral C68 Georgia. B.F. Gilt C69 Arlene Etched Silver

21/0 SIZE C70- Laura A.G.N. Silver

ca- Virginia B.F. Silver cn Olivia Coral & Gilt

07- Caroline B.F. Silver 072- Doris A.G.N. Silver

C8 Fairmont B.F. Silver 073 Miriam Silver

CIO Nola B.F. Silver C75 Olivia Etched Silver

Cll Glenwood B.F. Silver COOl Gladys Etched Silver

CI2 Rondeau B.F. Silver COI3- Teresa A.G.N. Silver

C14 Cordelia B.F. Silvcr C025- Doris A.R.N. Coral

CI5 Roberta B.F. Silver C034- Olga A.G.N. Silver

CI6 Cynthia A.G.M. Silver C035 Amy B.F. Silver

C17- Aldicc B.F. Silver C040- Susan A.G.N. Silver

CI8 Lucia B.F. Silver C051 Miriam B.F. Silver

C19- Sonya B.F. Silver COM Arlene Etched Coral

020" Martha D.F. Silver C056 Olivia Etched Silver

C21 Sandra B.F. Silver C065 Susan A.R.N. Coral

C22 Sandra B.F. Silver C066- Olga A.R.N. Coral

C23 Sylvian D.F. Silver C067 Amy B.F. Coral

*Shown on dial illustration pages

38


l Number Model Description Number Model Description

22/0 SIZE G34 Lady Lancaster B.F. & Dot Coral G35 Lady Lancaster B.F. & Dot Coral

GI' Lady Lancaster B.F. Silver G36 Lady Lancaster RF. Coral G2' Lady Lancaster B.F. Silver G37* Venita B.F. Coral G3 Sheila-Rowenna. B.F. Silver G38 Daphne B.F. Silver G4' Luetta. A.O.N. Silver GOO2' Clara A.G.N. & Dot Silver G5 Francine B.F. Silver GOO3' Bernice A.C.N . & Dot Silver G6' Ellyn A.G.N. Silver GOO5 Joanne A.a.N. & Dot Silver G7 Yvette-Veronica B.F. Silver GOO7 Jessica B.F. & Dot Gilt G8 Fritzi B.F. Silver GOO9 Monica A.a.N. Silver G9' Victoria A.O.N. Silver GOl4 Lucy A.G.N. Silver GW' Della A.C.N. Silver GOI5' Emily A.G.N. & Dot Silver Gll Helena A.G.N. Silver GOl6 Louise A.G.N. & Dot Silver Gi2' Sylvia A.G.N. Silver GOl7 Amelia B.F. Gilt GiS Elise A.O.N. Silver GOl8 Monica Etched Black GI4 Grace A.a.N. Silver GOl9 E mily RF. Silver GI5 Annette-Joyce A.G.N. Silver G020' Myrtle A.O.N. Silver Gi6 N ancy A.O.N. Silver G022 Camille A.C .N. Silver G17 Rosalie A.G.N. Silver G027 Venita B.F. Gilt GI8 N ina A.G.N. Silver G042 First Lady B.F.- Gold Dot-Coral GI9 Lorna A.G.N. Silver G04S' Frances A.C .N. Silver G20 Sophie-Daphne A.C.N. Silver G058 Lady Lancaster Oxidized N um. Silver G21 Lady Hamilton B.F. Silver G059 Lady Lancaster B.F. Gilt G22 Lady Lancaster B.F. Silver G060 Lady Lancaster B.F. Silver G23 Lady Lancaster B.F. Silver G061 Lady Lancaster B.F. Silver G24 Lady Lancaster B.F. Silver G063' Jessica B.F. Coral G26 Lorna. B.F. Coral G064 Clara A.R.N. Coral G27 Luetta. B.F. Coral G074 Jessica B.F. Silver G28 Lorna B.F. Coral G075 First Lady B.F. Coral G30 Linda B.F. & Dot Silver G076 First Lady Gold & Black Dots-Coral G31 Daphne B . F. Gilt Two T one G077 First Lady Gold & Black Dots-Coral G32 Janet A.G.N. Silver G078 First Lady Gold & Black Dots-Coral GS3 Vivian B.F. Coral G085 First Lady Gold Dot & Black Num.-8Uver

"'Shown on dial illustration pages


at. C N o.

8 8 8 8 8

001 002 003 004 005

8 8 8 8 8 8

010 011 012 013 014 015

8 8 8

016 017 020

34 036

80 8 8 8 8 8 8 8 8 8 8 8 8

037 038 039 040 041 042 044 045 046 047 048

8701 8702 8704

8706 8707 8711 8712 . 8713

8727 8729 8730 8731 8732 8734 8737 8738

Cat. Color No.

18 SIZE Blue 8053 Blue 8054 Blue 8055 Luminous 8056 Red & Blue 8057 (Double Hour) 8058

16 SIZE 8059 8060

Blue Blue Blue Blue 8077 Luminous 8078 Red & Blue 8079 (Double Hour) Blue Wine Blaek 8080

8081 12 SIZE 8083 Blue 8084 Blue 8085 Gilt 8086 Blue 8095 Gilt 8099 Luminous 8102 Blue 8103 Gilt 8104 Wine 8105 Blue 8106 Gilt 8107 Blue 8111 Gilt

18 SIZE Blue Blue Blue

16 SIZE Blue Blue Blue Blue Black

12 SIZE Blue Blue Gilt Blue Gilt Blue Blue Gilt

DETAILED HAND DESCRIPTIONS

HOUR AND MINUTE

Cat. Cat. Color IVo. Color No. Color

10 SIZE 8112 Luminous 8235 Blue (For Putman) 8236 Gilt

Blue 8113 Luminous 8237 Blue Gilt (For Clinton) Blue 8238 Gilt

8115 Rhodium Gilt 8239 Blue

8116 Rhodium Blue 8117 Gilt 8240 Blue

Gilt Gilt 8241 Gilt 8118 Rhodium 8119 Gilt 8242 Rhodium Blaek 8120 Gilt 8243 Blue

8247 White 0 SIZE 12/0 SIZE 8251 BIue

8252 Gilt Wine 8201 Blue 8253 Blue Blue 8202 Gilt Blue Luminous 8205 Luminous

8254 8255 Blue

(Long)

6/0 SIZE 8256 Blaek 8258 Gilt.

Blue 14/0 SIZE

Gilt 8211 Blue Wine 8217 Blue 18/0 SIZE Blue 8218 Gilt Blue 8223 Blue 8350 Blue Gilt 8224 White 8351 Blue Blue 8225 Blue (Short) Blue 8226 Gilt 8352 Blue Blue 8227 Blue (Long) Gilt 8228 Gilt 8353 Gilt Blue 8229 Gilt

(Long) Gilt 8230 Gilt Blue 8231 Gilt 8354 Blue

Gilt 8232 Gilt 8355 Blue

Luminous 8233 Blue 8356 Blue (Long) 8234 Gilt 8357 Gilt

SECONDS

10 SIZE 6/0 SIZE 8743 Blue 8774 Blue 8744 Gilt 8776 Blue 8745 Rhodium 8781 Gilt 8746 Blue (Short) 8747 Gilt 8790 Blue 8748 Blue 8791 Gilt 8749 Gilt 8792 Blue 8750 Blue 8793 Gilt 8751 Gilt 8794 Blue 8752 Rhodium 8795 Gilt

8796 Blue

o SIZE 8797 Gilt 8798 Blue

8773 Blue 8799 Rhodium 8800 Rhodium 8802 Black

Cat. No. Color

20/0-21/0-22/0 SIZE

8362 Blue (Short)

8365 Blue

8366 Gilt 8367 Blue 8368 Blue 8369 Blue 8370 Gilt 8371 Gilt 8372 Gilt 8373 Blue 8374 Gilt 8378 Gilt 8381 Blue 8382 Blue 8383 Gilt 8384 Blue 8385 Gilt 8386 Blue 8387 Gilt 8388 Blue 8389 Gilt 8390 Blue 8391 Blue 8392 Blue 8393 Blaek 8395 Rhodium 8398 Rhodium 8399 Rhodium

14/0 SIZE 8856 Gilt 836.0 Blue 8866 Blue 8867 White 8368 Blue 8369 Gilt 8370 Blue 8872 Gilt 8873 Blue 8874 Gilt tt:I 8875 Blue 8876 Blue tr::JI 8878 Rhodium 8879 White 8380 Rhodium 8382 Black 8883 Rhodium 8384 Gilt

~ ~ ~ ~

GENUINE HAMILTON STRAPS

GENUINE HAMILTON STRAPS

Hamil ton Material Wholesalers again have available complete assortments of genuine Hamilton straps for replacement use which are identical with the straps used on new watches. Every genuine Hamilton strap carries a die-stamped Hamilton crest on the back of the tongue half. Each strap is mounted on an individual card and protected by a transparent envelope. A strap display card for those jewelers and watch-repairmen who wish to use it is available. Hamilton straps are not identified by catalogue number so they must be ordered by specifying length; width, and type of leather. Natural pigskin and both brown and black calfskin are standard. Coral and gray are also avai lable.

Hamil ton straps are a profitable replacement item and alert jewelers and watchrepairmen find it easy to sell a new strap on many Hamil ton men's wristwatches brought in for service or repair. Arrange with your wholesaler to send you a representative assortment of Hamilton straps. You will find them to be a profitable item.

ALWAYS USE GENUINE HAMILTON MATERIAL .

41

42

HAMILTON MATERIAL CABINETS

HAMILTON MATERIAL CABINET

Essential equipment for every watch repair shop is a Hamilton Genuine Material Cabinet. Ready accessibility of materials from a neatly organized cabinet saves t ime. And it makes it easier to maintain inventories of essential material. Each of the cabinet drawers holds labelled bottles containing an assortment of the most-needed matel"ials for virtually all Hamilton civilian watches from 18 size to 22/ 0 size inclusive. A convenient reference chart for staffs and jewels is an integral par·t of tlie top dr:awer of t he cabinet. The case measures 13)4 l( 9)4 x 3~ inches. Available through Hamilton Material Wholesalers.

HAMILTON GENUINE MAINSPRING ASSORTMENT

A complete assortment of Hamilton mainsprings is also essential to every watch repair shop. And a convenient way to maintain a supply of mainsprings is through the use of the Hamilton Mainspring Cabinet. Each cabinet contains four dozenspr'ings for Hamilton watches 18 size to 22/ 0 size inclusive. Each spring is packed in an individual envelope on which is printed essential in formation on catalog number, size, and strength: The cabinet measures 6~ x 2~ x 2U and is complete with charts and index cards. Available through Hamilton Material Wholesalers .

. ALWAYS USE GENUINE HAMILTO MATERIAL

NOTICE

HAMILTON Material Cabinets are not immediately available. Shortages of certain Hamilton repair materials make it impossible to offer the cabinet for sale at this time. Availability of the Material Cabinet will be announced as soon as reasonable deliveries can be assured.

September 1947 MATERIAL SALES DEPARTMENT

Hamilton Watch Co.

MANUFACTUR ERS OF

'JhG lUatch. Of Railroad Accuracy LANCASTER, PA, U . S.A.

To: Hamilton Retail Jewelers

Attention of: Watch Repair Department

Your copy of the new Hamilton materials catalog is enclosed with this letter . The new catalog lists materials for all obsolete and current sizes and grades of standard Hamilton watches.

Inserted in the catalog is a revised materials price list .• Materials' prices have been modestly increased reflecting part of the higher manufacturing costs. The price list contains a special note on prices for materials for very old Hamilton grades. Please read it carefully.

Supplies of Hamilton materials continue to lag behind demand . This situation will continue into 1948 although it is to be expected that it will steadily improve month by month . Close contact with your Hamilton Materials Wholesaler on your materials' needs is recommended . As fast as materials become available, they are allocated to wholesalers to fill your orders. If your wholesaler does not have any given piece of material, it is safe to assume that it is not available here at the factory either .

Please note that genuine Hamilton straps are again available. See page 41 of the catalog. Your wholesaler is ready now to supply complete assortments of straps -- with or without a display card .•

Your comments or criticisms on this catalog will indeed be appreciated.

$;~tVtT HARuthhart:b Material Sales Manager

IMPORTANT PRICES QUOTED IN THIS PRICE LIST DO NOT NECESSARILY APPLY TO MANY MATERIALS FOR VERY

OLD GRADES

Hamilton's traditional policy of

making materials available for all

of its standard timepieces is being

continued. Unfortunately, contin

uation of the policy does not and can not mean that materials for

very old models particularly will

soon return to our materials inventories or that such materials wilI be

available at prices quoted in this

list. Inventories of many materials

for very old Hamilton models were

depleted during the war. Demand for materials in this classification has dropped sharply-so sharply

that it is no longer practical to pro

duce them in economical machine

production lots. Materials which are so affected will from now on

have to be made by manual meth

ods-at costs considerably higher

than the same material mass pro

duced.

A tabulation of these materials can not be offered because it would be

accurate only on the day issued.

Materials orders for very old

models, therefore, will be subject to availability or on a Hmaterial manufacture order" at a quoted

price subject to your confirmation.

HAMILTON WATCH COMPANY Lancaster, Pennsylvania

JEWELER AND WATCHMAKER PRICE LIST OF GENUINE HAMILTON WATCH MATERIAL

EFFECTIVE SEPTEMBER 15, 1947

F" Each X Dz.

F" Y2 Dz.

F" I Dz.

====================1===1=== ====== ARBORS.Barrel........ $ .75 $ 1.70 U .30

" Barrd, Motor. 1. 00 2.25 Pallet. . . . .60 1. 25 2.40 Winding. . ... . .. . ......... .. . 1.00 2.25

BALANCES, Gilt~crews .. " Gold screws ........ . .... .

With staff and gilt screws . With staff and gold screws.

BALANCES COMPLETE Gilt screws, Breguet spring .. Gold screws, Breguet spring .............. . Gold screws, Brcguet spring, 16 size Elin\'ar ... . Gold screws, Brcguet spring, 6/0 and sma!ler .. .

1.50 2.60 2.20 3.30

4 .35 5.45 5. 80 ' .00

BARRELS. . ........ . .. . ..... .75 .. with arbor fitted.. 1.60

Motor. .. .. ........... .. 1.00 Motor, with arbor fitted. 2.40

1.70 3.85 2.25

-==---====-- - --1--1---1---- --BRIDGES, Motor Ratchet . . . ... . .. .. .. . .

.. Pallet, with jewel, 17-19 jewel. .. Pallet, with jewels, 21-23 jewel.. &tting wheel. Stem ........... . Winding, 18 size ...... .. .... . All others, price on application

.75 1.65 2.65

.30

.50 ." ." 1.05

1.15

-======-======-======1-- -------CAPS, Intermcdiate, Setting wheel Regulator and Hairspring stud

.. Ratchet .. . .. . . . . Ratchet, Motor.

.30

.45

.50 ." .90

1.115 ------==-----·1-- - - ----CL!PKS .......... : . . :.... . .. . ... . .35 .60 1.10

Exposed wmdmg. . . . . . . . . .50 1. 05 2.00 CLICK AND SPRING, Complete. 1.10 2.75 - -----------1-- --- ---CLUTCHES. .65 1.45 2.75 -'-'-----'-------------------·1---"'-------COCKS, Balance, with jewels, gilt setting. . . 2.00

" Balance, ..... ith jew('ls, gold setting. 2.50 - ----'----'-----'-"----=-----·1-'-'''- ------COLLETS, Hairspring.. .30 .55 1.00 $1.90 -----'-'---------1--------DIALS, Sunk second, Enamel ...

" Double sunk, Enamel .. Plain Metal. .. . Metal, Etched .......... .. . . . . .. . . . ... . . Silver, Plain center, Inlaid Enamel numerals. Silver, applied gold numerals, 12 size . .... Silver, applied gold numerals, all others. Silver App. Gold Markers, 12 size .... Silver App. Gold Markers, all others. Sceomet<lr ... Seeometer hit. Luminous ..... . Luminous dots.

HANDS, H. &: M. Regular Spade or Moon Pro } " H. &: M. Fancy and Gilt . . . . . . . .. " . " H. &: M. Luminous and Double hour Pr ..

Seconds, Plain and Gilt .... . . . .. } Seconds, Fancy, Regular and Gilt .

HOOKS, Barrel Arbor (Grades 921-923).

HUBS, Motor Barrel. " Winding wheel. ...... .

Elinvar balance staff ..

INDEXES.

3.00 4.00 1.50 3.00 2 .50 5.35 4.00 4.00 3.50 2.00

.60 2 .50 2.00

.45

.50

.50

1.10 .45 45

.55

JEWELS, Balance, Escape nnd Pallet, Olive holes.. . .50 " Balance endstones, gilt or nickel setting. .40

Balance endstones, gold or steel setting. .70 Barrel, gilt setting. . . 1.45

7.50 10.00 3 .75

6.25

' .00 1.25 6.25 '.00

1.00

1.25

45

1.05

2.70 .90 .00

1.35 .S5

1.60

1.60

2.40

.S5

2.00

2.40 1.50

3.00

1.50

3.60

4.50 2.80

Barrel, gold setting. 2 .20 ----'-=-----'---------1--------

Center, gilt setting.. 1.00 Centcf, goldsetting. . ... ... 1.50 Center, raised gold setting. 1.65 Center, unset... .75

- ------'-----==-========1--------Plate, gilt setting . . .85 1.95 P1atc, gold setting. . . . . . . . . . . 1.10 Plate, raised gold setting. . . . 1.30 Plate and Pallet, unset . . . . . . . . . . . .50 1.05 ______ cc-__,_-::--------I--------Plate, Cap, gilt setting. . .40 .80 Plate, Cap, gold setting. . . . . .70 1.60 Plate, Cnp, gold cap setting. 10

-----: ___ ::-::-____ ---:--:-:----::-:-----·I-cc:---- - --Pallet stones, Sapphire or Ruby. . . . iO J . 60 Roller jewels, Sapphire or Ruby. . .50 1.05 1.85 3.20

.. Furnished on display cards If requested.

LEVERS, Setting lever, stud and nut 168. " All others ..

NUTS, Motor barrel arbor. " Motor hub

Release stud. Regulator.

PALLETS AND FORKS ... . . .. . . . PALLETS, FORKS AND ARBORS.

PINIONS, Cannon and Center &conds ........ . " Escape, Winding and Intermediate ..

Minute Hand (Grade 980A) .. . ... .

PINS, Push.

POSTS. Auxiliary Minute (Grade 980A) .... .. Main Hand (Grade 9S0A or 980B).

REGULATORS ..... . .. . .. . " Chamfered.

ROLLERS, Single, steel, with jewel fitted .. " Small double . ..... .... . .... . . . .

Large double, with jewel fitted. Combination.

SECONDS SETTING LEVER ok SPRING ARM, (Grade 987S)

SCREWS, Balance and MeAntime, Gold. " Meantime nickel ..... . .

Ikgulator, Micrometer. Regulat(lf, 18 8i~ .. Setting lever ..... .

~lll~th~~~. ............... . ... . .. . .. . .... . .

SHIPPERS, All.

SPRINGS, Click and Yoke, Wire. " Click Flat steel. .......... .. ..... . .. . . . ... . ..... .

Clutch, Clutch Lever, Setting Lever and Retaining, Setting Cap ... . .............. . ... . .. .. . . .. ; ..

Hair, Breguet Steel ... . .. . .. . Hair, Breguet, Elinvar Extra. Main, Commercial Quality. Main, Reverse Quality . .

Regulator . ... .. . .. .. . Regulator, with serew . ....... .. .. . Regulator, chamfered, with screw.

SPRINGS, Shipper, 18 size .. " Shipper, 16 size ..... . ..... .

Minute Wheel (Grade 987S). Stabilizer (Grade 987S) .

STAFFS, Balance .. .. Cenkf ... . .. .. . . ... ... .. . .. .

Qenter, with pinion combined .

STEMS, Case ..... " Winding.

STRAPS, Rcgulator, with ad juating screw (Grades 921-923) ..

STUDS, Hairspring and Release ..

WASHERS, Winding wheel hub.

WHEELS, Center, staff and pinion, flat arm, gilt . . . " Center, staff and pinion, round arm, gilt .. .

Center, staff and pinion, fiat arm, gold . .. . Center, ~taff and pinion, round arm, gold.

Third and Fourth, with pinion, flat arm, gilt . . .. Third and Fourth, with pinion, found arm, gilt. Third and Fourth, with pinion, fiat arm, gold .... Third and Fourth, with pinion, round arm, gold .

Escape . ... . .... , ... . Escape and pinion.

Hour, Minute, Setting and Intersetting . Ratchet, 18 size ..... . .. . ......... . Ratchet, Exposed, 17 and 21 Jewel. Ratchet, Exposed, Motor.

Winding, 18 size ... .. . . Winding, ElPOsed, AU.

yOKES ...... . . . . ... .. . . . . .. ...... .. .. .. ... . .. . ..... ... . . MATERIAL CABINET, Containing 200 bottles (not currently

available) MAINSPRING CABINET, Containing 4 doz. C. Q .. *LEATHER STRAPS.

F" F" Fo< Each %Dz. 72 Dz. 1 DJ.

---------$1.00

.50 $1.05 - --------

.65 1.45 1.10 .25 .45 .40 .80

- --- -----2.50 3.00

- - - --- - --.75 1. 70 . 75 1. 70 .60 1.25 $2.40

.30 " 1.00

.35 .60 1.10

.35 .60 1.10

.75 1. 70 1.15

.85 1.95

.45 .90 1.65 1.20 2.85 150

.50 1.05 2.00 13.60

.25 .35 .60 l.ll}

.25 .35 .60 1.11}

.35 .60 1.l0 45 .90

.25 .35 .60 1.11}

.25 35 .60 1.11}

.20 .30 .50 " --- ---- --

.50 1.05 ---- -----

.25 .30 .40 . is

.30 .50 .80 1.45

.45 .90 1.65 300 - - - ------

1.00 2 . .'i0 1.25 3 .25

.40 1.00 !.SO 3.50

.45 1.10 2.10 4.00 ------ - --

.70 1. 60 1.00 2.50 1.20

---------.25 .35 .60 1 00 .45 .90 1.65 .40 .80 1.45 2.75 .30 ." 1.00 1.90

.50 1.35 2.40 "" .75 1. 70 3 .30 1.10 2.75

.40 . 80 1.35

.40 .80 1.35

.60 1.25 2.40 UO

.35 .60 1.l0

.30 .45

1.45 1.85 2.10 2.45

1.00 2.25 1.10 1.65 1.85

- ------- --1,10 2.75 1.85

.40 1.00

.40 1.00 1.10 1.50

.40 .80 1.30

.45 .90 1.65

12 .00

" 6.31}

Above prices apply where specified quantities of one factory number are ordered. Mainsprings may be assorted as to strength, ba1ance staffs as to pivot diameter, jewels as to hole size, Items purchased in gross lots, consisting of not less than one dozen of a number are subject to an additional 10% discount, Items purchased in one-quarter gross lots, consisting of not less than one dozen of a number are subject to an additional 5% discount.

li94A ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE

l t.o n - welcome to the nawcc! watch materials catalog ... trations of parts of currently...

Documents