kx-ns8188 e1 adapter kx-ns8290 pri adapter product information

KX-NS8188 E1 AdapterKX-NS8290 PRI AdapterProduct InformationRev 1.1E January 09, 2013

Specifications and schedule are subject to change without notice.Specifications and schedule are subject to change without notice.

Panasonic System NetworksPanasonic System NetworksPBX SE team PBX SE team

NS1000 Version 2NS1000 Version 2Document for SE and Sales TrainingDocument for SE and Sales Training

2

When customers want to use IP-Phone (*) mainly for extension and they want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with new trunk adapter is recommended because KX-NS1000 supports more IP capacity and IP functionality than KX-NCP or KX-TDE.(*)- KX-NT / KX-UT by Panasonic- NT based software phone by Panasonic- SIP hardware phone by other maker- SIP software phone for PC, Android, iPhone and so on

1. Introduction

Model Specifications

KX-NS8188X E1 adapter on SIP trunk

KX-NS8290CE PRI30 adapter on SIP trunk

KX-NS8290X PRI23 adapter on SIP trunk

Trunk Adaptor

SIP Trunk (30-ch)

PRI30

SIP Extension

PanasonicKX-NS8290

PRI30

PRI Card

OtherSIP Phone

SIPSoftphone

KX-NT KX-UT

IP Network

KX-NS1000

KX-NCS0290

215 mm (W)44 mm (H)

200 mm (D)

500g

3

Before adding KX-NS1000 After adding KX-NS1000

Stacking Card

AnalogCO

KX-TDE

CO Card

KX-DT w/DSS Console

SLT

EXT CardMPR Card

AnalogCO

KX-TDE

CO Card

OtherSIP Phone

SIPSoftphone

KX-NT KX-UTSLT

EXT Card SC CardSC Card

Direct Connectionlike TDE600 to TDE620

IP Network

KX-DT w/DSS Console

KX-NS1000

On the other hand, when customer has Panasonic PBX now, they can add IP capacity and IP functionality using KX-NS1000 version 2 with stacking card KX-NS0130 with keeping current PBX.This configuration is useful for new customer also whenthey need more SLT phone, Digital PT with DSS Console,Analog PT and analog CO as well as IP-Phone.

KX-NCS0130

KX-NS0130 SC card for NS100

KX-NS0131 SC card for NCP

KX-NS0132 SC card for TDA/TDE

100 % FeatureTransparencylike TDE600to TDE620

2. Introduction

4

3. Table of Contents

Chapter Explanation

1 Overview

2 Specifications

3 Concept of programming for Public mode

4 Step by step programming for the trunk adapter

5 Step by step programming for KX-NS1000

6 Programming hint for Private mode (QSIG)

7 Demonstration guide

5

Chapter 1Overview

6

One PRI by card Two PRI by card and adapter

Panasonic KX-NS8290 increases PRI capacity. KX-NS8188 for E1.

Activation key of IP Trunk is NOT required in KX-NS1000 to connectPRI / E1 trunk adapter, even if SIP Trunk of KX-NS1000 is used.

Trunk Adaptor

SIP Trunk (30-ch)

PRI30

SIP Extension

PanasonicKX-NS8290

PRI30

PRI Card

OtherSIP Phone

SIPSoftphone

KX-NT KX-UT

IP Network

KX-NS1000

PRI30

PRI Card

OtherSIP Phone

SIPSoftphone

KX-NT KX-UT

IP Network

KX-NS1000

11. Trunk Adapter for E1 / PRI

KX-NCS0290 KX-NCS0290

IP Trunk AK

7

Also useful to provide PRI/E1 with 2-ch Analog CO or 4 BRI.

Trunk Adaptor

SIP Trunk (30-ch)

PRI30E1

AnalogCO

Maximum 256 ch is available for E1 / PRI by adapter and IP trunk.

Trunk Adaptor

SIP Trunk(30-ch)

Max. 256ch can be registered to SIP provider or the adapter.

PRI30

PRI Card

Trunk Adaptor

SIP Trunk(30-ch)

PRI30E1SIP

Provider

CO Card

SIP Trunk(xx-ch)

12. Trunk Adapter for E1 / PRI - Capacity

256ch

PRI30E1

Line NS1000x 1

NS1000x 2

NS1000x 3

NS1000x 4 or more

Trunk 256 256 x 2 600

Legacy 256 256 x 2 600

IP incl E1/PRI adapter 256 256

SIP 256 256

H.323 48 48 x 2 = 96

8

More Analog CO by TDE (H.323)

KX-TDE with CO card increases CO capacity using H.323.

Activation key of IP Trunk is required in KX-NS1000 for H.323 all channels and required in KX-TDE for more than 4 or 16 channels.Activation key for “Enhanced QSIG” is not required because this configuration needs only basic QSIG function.

OtherSIP Phone

SIPSoftphone

KX-NT KX-UT

H.323

IP Network

CO Card

MPR Cardw/ VoIP DSP

13. TDE as Option by H.323

IP Trunk AK

IP Trunk AK

AnalogCO

KX-TDE

Reference

Stacking card isnot required in this case.

SC Card

EnhancedQSIG AK

EnhancedFeature AK

9

Trunk Adaptor

H.323 + SIP Trunk(256 ch)

PRI30

AnalogCO

AnalogCO

H.323(96 ch)

KX-NS1000

KX-TDE

CO Card

MPR Cardw/ VoIP DSP

HQ Branch

IP Network

KX-NCP

H.323(32 ch)

14. TDE as Option by H.323 - Capacity

Max. 96ch can be used for any other PBX. (Chanel is occupied only when call is made. )

Reference

Maximum 96 ch is available for Analog CO / BRI and H.323.

Line NS1000x 1

NS1000x 2

NS1000x 3

NS1000x 4 or more

Trunk 256 256 x 2 600

Legacy 256 256 x 2 600


SIP 256 256

H.323incl Analog CO by TDE

48 48 x 2 = 96

CO Card

CO Card

H.323(32 ch)

10

More Analog CO and DPT / SLT by Stacking Card

This configuration is useful if customer needs DPT with DSS Console and so on.- SC card for TDE-NCP is installed instead of MPR card.- SC card for NS1000 is installed to free slot. (Slot for “PRI+2SLT” etc )

Stacking Card increases DPT + SLT + Trunk capacity.

CO Card

OtherSIP Phone

SIPSoftphone

KX-NT KX-UTKX-DTSLT

EXT Card SC CardSC Card

Direct Connectionlike TDE600 to TDE620

IP Network

15. Stacking Card

KX-NS1000

AnalogCO

KX-TDE

100 % FeatureTransparency

like TDE600 to TDE620

Stacking Card

11

SpecificationsYou can connect a maximum of 2 existing PBXs for one KX-NS1000. A maximum of 8 existing PBXs and 16 KX-NS1000 can be connected for the entire One-look Network. An existing PBX refers to a Panasonic KX-TDE series, KX-NCP series, or KX-TDA100/200/600/620 PBX.

16-1. Stacking Card - Specifications

IP Network

KX-DT

KX-TDE600

KX-TDE620

KX-NCP

KX-DT KX-DT

IP Network

KX-DT

KX-TDE600 KX-TDE620

KX-NCP

KX-DT KX-DT

SC Card

SC Card

SC Card

SC CardSC Card

QSIG Max. 8 PBXs

Different PBX category cannot be mixed to one KX-NS1000. Category 1 : KX-NCP500-1000 Category 2 : KX-TDE(A)100-200 Category 3 : KX-TDE(A)600-620Stacking card for KX-TDA100D is not planned currently.

NCP500+TDE200 : N/ATDE100+TDA200 : OKTDE600+TDE620 : OKTDE620+TDE620 : OK

Stacking Card

12

Conditions- Cards in right table are not supported. Reason is as follows. - MPR is not required. - IP feature is supported by KX-NS1000. - DISA/SVM feature is supported by KX-NS1000 without AK. - New cards for TDE-NCP version 5 are N/A. - By above condition, KX-NT400 and KX-HGT100 cannot be used after connecting with KX-NS1000.- IP capacity AK is not required for trunk and extension in existing PBXs because these are not IP. - Other AK such as CA is required in KX-NS1000 for extension in existing PBX.- In case of TDA100/200 and TDE100/200 OPB3 card with ECHO16 must be installed in only Slot 1. *) Other cards except OPB3 or OPB3 card with other daughter board except ECHO16 can be installed to any slot.

16-2. Stacking Card - Conditions

Not Supported

Symbol Model

RMT TDA0196

MEC TDA0105/TDE0105

DSP4 NCP1104

DSP16 TDE0110

DSP64 TDE0111

CTI-LINK TDA0410

IP-EXT16 TDA0470

IP-GW4E TDA0484

IP-GW16 TDA0490

IP GW4 TDA0480

MSG4 TDA0191

ESVM2 TDA0192

ESVM4 TDA0194

CLCOT8 TDA1180

CLCOT8E TDA1186

MCSLC24 TDA1178

MCSLC16 TDA1176

Stacking Card

13

ProgrammingIt is not required to program for connection (Same as TDE600 to TDE620 connection). Property of cards in TDE/NCP can be programmed using NS1000 Web.

17. Stacking Card - Programming Stacking Card

14

18. Recommendation of Configuration

KX-NS1000 is recommended as follows, when new customer does not have Panasonic PBX now and they want to use IP phone mainly for extension.

When customer wants to useRecommendation

for Extension for Trunk

One PRI or 4 BRI Optional Card

E1 / 2 or more PRI

E1 / PRI + 4 BRITrunk Adapter

(+ Optional Card)

IP Phone + 2 SLT E1 / PRI + 2 Analog

3 or more Analog CO TDE/NCPas optionby H.323

5 or more BRI

Other mixture

IP Phone+ Digital PT+ Analog PT + SLT

(Any above configuration)TDE620

with Stacking Card

Version 2

Version 1 & 2

Version 1 & 2

Version 2

15

19. KX-NS1000 Capacity

Total capacity is as follows.

Line NS1000x 1

NS1000x 2

NS1000x 3

NS1000x 4 or more

Trunk 256 256 x 2 600

Legacyby stacking card or/and “xxx+SLT2” card

256 256 x 2 600


SIP 256 256

H.323 48 48 x 2 = 96

Extension 640 1000

Digital PT / Analog PT / SLTby stacking card or/and “xxx+SLT2” card

480 SLT (*1)512 DPT (*2)

1000

IP 640 1000

UT 640 1000

NT (NS1000 V1) 128 128 x 2 128 x 3 128 x N or 1000

NT (NS1000 V2) 256 256 x 2 256 x 3 1000

(*1) 24SLT x 10 by TDE620 x 2 for example(*2) 256 DPT incl DXDP by TDE620 x 2 for example

16

Chapter 2Specifications

17

Hardware Appearance is as follows.

21. Hardware Appearance

No. Description

1 System LED

2 E1 / PRI line LED

3 DC Jack

4 LAN Port

5 LAN LED (Link)

6 LAN LED (Transmission Speed)

7 E1 / PRI line port

8 Initialize button (Not slide switch)

Front

Back

Wall Mountain

Unpack the box and check the items below: Main Unit x 1 Screw x 2 Washer x 2

18

KX-NS8188 / KX-NS8290 supports PoE.

If PoE is not supported by network, AC adapter is required. KX-A420 for Brazil KX-A239 for others

*) These are same model of AC adapter for KX-UT phone.

22. PoE (Power over Ethernet)

19

KX-NS8188 E1 adapter supports following features.

23. KX-NS8188 E1 Adapter

Features NS8188 TDA0188(Reference)

Signaling DR2 Yes Yes

E&M-C No Yes

E&M-P No Yes

Dial Type MFC-R2 Yes Yes

DTMF Yes Yes

Pulse No Yes

Caller Number Notification (ANI) Yes Yes

Charge / Meter Pulse No Yes

Deny collect call for Brazil Yes Yes

Outgoing call auto disconnect Yes Yes

KX-TDE

KX-TDA0188

Trunk Adaptor

KX-NS8188

E1

KX-NS1000

20

KX-NS8290 PRI adapter supports following features.

24. KX-NS8290 PRI Adapter

Features NS8290 NS0290(Reference)

Mode

CO (Public) Yes Yes

Extension No Yes

QSIG-master/slave (Private) Yes Yes

ISDNCarrier Service(Public)

CLIP / CLIR Yes Yes

COLP / COLR No Yes

CNIP /CNIR Yes Yes

CONP / CONR No Yes

Advice of charge Yes Yes

Call Forwarding No Yes

Call Hold No Yes

Call Transfer (incl. ISDN Centrex) No Yes

Tree-party conference No Yes

Malicious call identification No Yes

Generic keypad protocol No Yes

CCBS No Yes

ISDN - Virtual Private Network No Yes

E-911 (for PRI23) Yes Yes

Trunk Adaptor

KX-NS8290

KX-NS0290

PRI Card

ISDN

“No” because these services by ISDN provider are not popularand PBX can support same feature basically.

Confby

PBX

Confby

ISDN

KX-NS1000

21

25. KX-NS8290 PRI Adapter for QSIG

Trunk Adaptor

PRI QSIG

H.323 QSIG

Private Network

(Leased ISDN)

30ch or 23ch

NS1000 or other PBX

PRI QSIG

H.323 is used for this configuration instead of SIP.

KX-NS8290 PRI adapter supports QSIG also.Features NS8290 TDA0290

(Reference)

QSIG service

CLIP/CLIR Yes Yes

CNIP/CNIR Yes Yes

Call Forwarding (CF) Yes Yes

Call Transfer (CT) Yes Yes

Completion of Calls to Busy Subscriber (CCBS)

Yes Yes

Network Direct Station Selection (NDSS)

Yes Yes

Centralized Voice Mail Yes Yes

Network ICD Group Yes Yes

KX-NS1000

Line NS1000x 1

NS1000x 2

NS1000x 3

NS1000x 4 or more


SIP + PRI Adapter for Public 256 256

H.323 + PRI Adapter for QSIG 48 48 x 2 = 96

IP Trunk AK

22

Fractional service is also available.<Stand alone>

26. Fractional Service

20ch

Trunk Adaptor

KX-NS1000

1st KX-NS1000in Fukuoka

20ch

20chE1/PRI

Trunk Adaptor

30ch

Trunk Adaptor

10ch

Trunk Adaptor

Total 256ch

<One-look network>

2nd KX-NS1000in Tokyo

16th KX-NS1000in Niseko

30ch

Trunk Adaptor

60chE1/PRI

10chE1/PRI

20chE1/PRI

23

Back-up is available automatically for SIP trunk incl E1 / PRIadapter, KX-NT/UT IP-phone and one look connection.

SIP Trunk

PRI/E1 or SIP ProviderTrunk Adaptor

KX-NS1000 (1st)Master

KX-NS1000 (2nd)Back-up Master

KX-NT KX-UT

Trunk Adaptor

KX-NS1000Master

KX-NS1000Back-up Master

KX-NT KX-UT

After master PBX stops working,

SIP Trunk

One-Look AK One-Look AK

Back-up master PBX works as slave PBX usually.But it works as master PBX after master PBX stops working.

KX-NT KX-UT

KX-NT KX-UT

One-Look AK One-Look AK

PRI/E1 or SIP Provider

27. Solution with “Back-up Master”

24

Chapter 3Concept of Programming

for Public Connection

25

31. Concept of Programming - Adapter

The trunk adapter is PBX with E1 / PRI trunk and SIP extension.SIP trunk of KX-NS1000 is registered to SIP extension of the adapter.

<Programming for the trunk adapter>Software of the adapter is basically same as KX-NS1000. Features except E1 / PRI and SIP extension are removed. Therefore programming method is very similar to KX-NS1000.

Trunk Adaptor

E1 / PRI

SIP Extension401-430

PRI

KX-NS1000

30ch or 23ch

KX-NS0290

- PRI configuration is same as programming for KX-NS1000 PRI card (KX-NS0290). E1 configuration is same as KX-TDE E1 card (KX-TDA0188).

- SIP extension configuration is same as KX-NS1000. But SIP extension is programmed by default. 401 to 430 for E1 / PRI30 401 to 423 for PRI23

PRI Card

ID 401-430SIP Trunk

KX-TDE

KX-TDA0188

E1/ ISDN

26

32. Concept of Programming – NS1000

<Programming for KX-NS1000>The trunk adapter is basically SIP provider for KX-NS1000.Following has to be programmed.- IP address of the adapter as SIP server destination - SIP registration User ID (Password is not required.)- Connection Attribute : SIP Provider / Trunk Adapter

Trunk Adaptor

SIP Extension401-430

KX-NS1000

30ch or 23ch

E1/ ISDN

E1 / PRI

ID 401-430SIP Trunk

27

401 402 430

33. Concept of Programming - Call

<Programming for KX-NS1000 - CONT>Programming of the trunk adapter is not required for DDI / DIL incoming call from E1/PRI to SIP extension. It works like DIL 1:1 without programming and DDInumber and caller ID are informed from the trunk adapter to KX-NS1000. Programming of KX-NS1000 is required for DDI / DIL.Outgoing call is also programmed forKX-NS1000 instead of the trunk adapter.

Therefore administrator has to access only KX-NS1000 to change extension number, DDI and so on after dealer installed.

SIP Extension

KX-NS1000

E1 / ISDN

SIP Trunk

CH1 CH2 CH30

Trunk Adapter

E1 / PRI

DDICaller ID

28

Chapter 4Step by Step Programming

for Trunk Adapter

Trunk Adaptor

KX-NS1000

29

Operation and “SYSTEM” LED display is as follows.1. Power On (Connect AC adapter or connect LAN with PoE) (a) Amber On (5 sec) (b) Amber rapid flash (5 sec)2. During (b), keep pressing Initialize button for 1s. (c) Off (2 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash

- Display of (b) finishes before 5 sec after operation of (2).- Display of (f) means success of initialization and awaiting “Easy set-up” of web maintenance console.

41. Initialize

Initialize ButtonSystem LED

Trunk Adaptor

KX-NS1000

30

LED indication is as follows.

42. LED Indication

Trunk Adaptor

KX-NS1000

31

(1) Set IP address 192.168.0.99 for example to your PC like first connection of KX-TDE or KX-NCP. - Trunk adapter does not have maintenance port with DHCP server. - Sub-net mask should be 255.255.255.0 (2) Connect 192.168.0.151 by Firefox. - Default IP address of trunk adapter is 192.168.0.151.

43. PC Connection - 1

192.168.0.151by default

192.168.0.99for example

Trunk Adapter

KX-NS1000

192.168.0.101by default

DHCP Server

For demo, NS1000 with DHCP server function is useful to assign IP address of PC automatically.

Trunk Adaptor

KX-NS1000

32

(1) In 10 seconds from step in previous page, log-in menu is displayed.(2) Input “INSTALLER” as user and “1234” as password.

43. PC Connection - 2

Trunk Adaptor

KX-NS1000

33

44. Easy setup - Language selection

(1) Select language.Trunk Adaptor

KX-NS1000

34

44. Easy setup - 1

(1) Select Suffix of KX-NS1000 and area.

If Suffix is changed, system restarts again after click [OK].Wait 3 min and connect PC again.

No need to change

(a) Amber slow flash (30 sec)(b) Amber On (10 sec)(c) Amber rapid flash (5 sec)(d) Amber On (30 sec)(e) Amber slow flash (120 sec)(f) Green slow flash

Trunk Adaptor

KX-NS1000

35

44. Easy setup - 2

No need to change.- Adapter name is only for reference.- Time is used only for error log.

Trunk Adaptor

KX-NS1000

36

44. Easy setup - 3

(1) Input IP address of trunk adapter in actual customer’s network. Get the IP address from IT manager.*) For demo, default is OK.

Trunk Adaptor

KX-NS1000

37

44. Easy setup - 4

No need to change.- Time is used only for error log. Trunk Adaptor

KX-NS1000

38

44. Easy setup - 5

(1) Input password as you hope, click [Finish].(2) Wait for 30 seconds.

If LAN setting is changed, system restarts again after click [OK].Wait 3 min and connect PC again.

(a) Amber slow flash (30 sec)(b) Amber On (10 sec)(c) Amber rapid flash (5 sec)(d) Amber On (30 sec)(e) Amber slow flash (120 sec)(f) Green slow flash

Trunk Adaptor

KX-NS1000

39

45. Maintenance Console - Top menu

If LAN setting is changed, (1) Remove the trunk adapter from LAN(2) Connect it to actual customer’s network.(3) Connect PC to IP address of trunk adapter using Firefox.(4) After log-in, following top menu is displayed.

If LAN setting is not changed, following Top menu is displayed.

Trunk Adaptor

KX-NS1000

40

45. Maintenance Console - 1

Software version can be confirmed as follows.Trunk Adaptor

KX-NS1000

41


Parameter for PRI can be modified as follows.(Same as “PRI + 2 SLT” card) Trunk Adaptor

KX-NS1000

42


IP address of adapter can be changed.(No need to change usually.) Trunk Adaptor

KX-NS1000

43


Software can be updated by one step. (Not same as KX-NS1000)

- Wait 15 minutes after clicking [Execute]. (Same as KX-NS1000.)

Trunk Adaptor

KX-NS1000

44


E1/ PRI Card diagnosis is supported.

Out of service can be assigned.This is required for software update also.

Trunk Adaptor

KX-NS1000

45

Chapter 5Step by Step Programming

for KX-NS1000

46

51. KX-NS1000 - Out of Service

Install virtual SIP trunk card.Out of service is required for port or card beforeprogramming in following pages.

Trunk Adaptor

KX-NS1000

Trunk Adaptor

47

52. KX-NS1000 - Connection Attribute

Change connection attribute from “SIP provider”to “Trunk Adapter” for each channels or click[Trunk Adapter] button to change max. 30 ch at the same time.

Trunk Adaptor

KX-NS1000

Trunk Adaptor

Use this. No need to program each ch.

48

Max. 16 Adapter*) If program manually not using “trunk adapter”, more than 16 adapter

can be programmed.

53. KX-NS1000 - Trunk Adapter button - 1

Input IP address of trunk adapter and click [Next].- Trunk adapter name is for reference.

Web maintenance console for the trunk adapter is opened.

For reference

Trunk Adaptor

KX-NS1000

Trunk Adaptor

192.168.0.151 192.168.0.152

49

Select range to connect the trunkadapter instead of SIP provider.Select IP address and click [Finish].

If fractional service is used, set “20” for example. Otherwise NS1000 tries making call using 21ch to 30ch of PRI.

Trunk Adaptor

KX-NS1000

Trunk AdaptorSIP

Provider

192.168.0.151 192.168.0.152

54. KX-NS1000 - Trunk Adapter button - 2

50

55. KX-NS1000 - Registration to SIP Server

Connection attribute were programmed by previous step. Parameters for registration to SIP server (E1/PRI adapter) were also programmed.

Trunk Adaptor

KX-NS1000

Trunk Adaptor

192.168.0.151 192.168.0.152

51

56. KX-NS1000 - CLIP

“PBX CLIP” has to be selected as follows to send CLIP on extension for outgoing call. Trunk Adaptor

KX-NS1000

Trunk Adaptor

52

57. KX-NS1000 - In Service

Set In Service. - Other programming such as ARS, TRS is basically same as PRI for KX-TDE/NCP.- However it is required to program as next 2 pages additionally because I/F with trunk adapter is SIP.

When E1/PRI line of trunk adapter is fault, trunk adapter stops communication with KX-NS1000. Therefore the SIP trunk ch of KX-NS1000 becomes fault.This specification is useful not to use the SIP ch automatically for ARS and so on.

Trunk AdaptorE1 /

ISDN

KX-NS1000

53

58. KX-NS1000 - Dialing Plan

Dialing plan has to be programmed for outgoing callbecause I/F with trunk adapter is SIP en-block dial.Otherwise extension caller has to wait for 10 secondsto hear ring back tone after dial to E1/PRI trunk adapter.

Trunk Adaptor

KX-NS1000

Trunk Adaptor

54

59. KX-NS1000 - DDI Modification

DDI first 3 digits has to be removed because I/F with trunk adapter is SIP. ID such as “401” + real DDI number is informed as DDI number from E1/PRI adapter to KX-NS1000.

Trunk AdaptorE1 / ISDN

KX-NS1000DDI 5678 DDI 4015678

DDI 5678 Program DDI table.

55

Chapter 6Programming Hint forPrivate Mode (QSIG)

56

Trunk Adaptor

61. Easy Setup for Adapter

“Private” has to be selected by easy setup mode.

KX-NS1000

Ext 1xx

Ext 2xx192.168.0.101 192.168.0.151

ISDN QSIGH.323

57

Trunk Adaptor

62. PRI QSIG mode for Adapter

QSIG (Slave) is assigned automatically after easy setup.

KX-NS1000

Ext 1xx

Ext 2xx192.168.0.101 192.168.0.151

ISDN QSIGH.323

58

192.168.0.101

Trunk Adaptor

63. H.323 programming for Adapter

H.323 destination programming of adapter is also required. Common IP address is assigned for any dial. (Not each dial)

KX-NS1000

Ext 1xx

Ext 2xx192.168.0.101 192.168.0.151

ISDN QSIGH.323

IP address of Back-up master PBX

59

Trunk Adaptor

64. H.323 programming for KX-NS1000

H.323 destination programming of KX-NS1000 is required for adapter as well as other PBXs.Sole difference is that activation key for IP trunk is not required.

IP Network

KX-NS1000

Ext 1xx

Ext 2xx

Ext 3xx

Ext 4xx

192.168.0.101 192.168.0.151

192.168.30.101

192.168.40.101

ISDN QSIG

DN2IP table (Dial to IP)----------------------------------- Dial 2xx to 192.168.0.151Dial 3xx to 192.168.30.101Dial 4xx to 192.168.40.101

H.323

60

Chapter 7Demonstration Guide

61

71. Configuration Example

PRI Adaptor

SIP Trunk (30-ch)

Ext 101CLIP 01234311

KX-NS1000

Ext 102CLIP 01234312

PRI

Ext 201CLIP 01234321

KX-NCP with PRI

KX-TDEwith 2 PRI Extensionas ISDN provider P

RI

PRI

Ext 301 Ext 31X Ext 32X(for test)

DLC

62

Dial 321(Remove 01234 by ARS)

72. Outgoing Call

PRI Adaptor

SIP Trunk (30-ch)

Ext 101CLIP 01234311

KX-NS1000

Ext 102CLIP 01234312

PRI

Ext 201CLIP 01234321

KX-NCP with PRI


RI

PRI


DLC

DDI 321

01234311

Dial 321

Dial 0/9-01-234-321

Dialing plan 3XX

DDIProgram

63

Dial 312(Remove 01234 by ARS)

73. Incoming Call

PRI Adaptor

SIP Trunk (30-ch)

Ext 101CLIP 01234311

KX-NS1000

Ext 102CLIP 01234312

PRI

Ext 201CLIP 01234321

KX-NCP with PRI


RI

PRI


DLC

DDI 312

DDI 401312

01234321 Dial 0/9-01-234-312

DDIProgram

64


74. PRI Extension

PRI Adaptor PRI

PRI

PRI

DLC

Standard LAN cable can be used by this switch for PRI Extension.

65

75. KX-NS1000 – SIP Register Resending

“Register Resending Interval” has to be 10 seconds.If default value 300 seconds is used, it takesfor 0 to 300 seconds to reconnect KX-NS1000 and trunk adapter, when trunk adapter returns IN Service from Out of Service or LAN is reconnected.

Trunk Adaptor

KX-NS1000

Trunk Adaptor

66

Thank you !The END

kx-ns8188 e1 adapter kx-ns8290 pri adapter product information

Documents