kverneland taarup horizontal auger diet feeders product information 2012
TRANSCRIPT
Range overviewModel 608 610 612 614 616 618
´Capacity (m3) 8 10 12 14 16 18
Loading capacity (kg) 3500 4400 5200 6100 7200 8000
Empty weight (kg) 3500 3600 4600 4700 5300 5400
Overall height
12.50/80x15.3 tyres (m)
2,42 2,69 - - - -
315/80xR22.5 tyres (m)
- - 2,50 2,78 - -
40x14 tyres (m) - - 2,44 2,71 2,64 2,83
15xR22.5x18 ply tyres (m)
- - - - 2,70 2,88
Overall length (m) 5,16 5,16 6,16 6,16 7,16 7,16
Overall width (m) 2,10 2,10 2,10 2,10 2,10 2,10
Overall with over tyres (m)
2,01 2,01 2,01 2,01 2,13 2,13
Kverneland Load Capacity Load Weight Power Req.
608 8m³ 3500 kg 55/60 kW/hp
610 10m³ 4400 kg 55/60 kW/hp
612 12m³ 4600 kg 60/80 kW/hp
614 14m³ 4700 kg 60/80 kW/hp
616 16m³ 5300 Kg 70/95 kW/hp
618 18m³ 5400 kg 70/95 kW/hp
Kverneland 608-610-612-614-616-618
Brochure
Overview
Robust Auger Drive
- Simple chain & sprocket transmission for long life & simple maintenance
- All chains and sprockets are situated in an oil bath, providing continuous lubrication
- Easy access to the complete drive mechanism
The Two Auger System
The two contra-rotating augers ensure fast incorporation of long or baled material with other components
The auger- shear bar combination permits the fast incorporation of baled or long material, ensuring mixing time is as short as possible
The shear bar
The Knives
For a more aggressive cutting action
- additional knives can be fitted to the augers as necessary
The two augers are fitted with replaceable circular cutting knives with a multiple of useable
cutting edges
The Mixing ChamberThe lower part of the mixing chamber features a unique design of corrosion resistant Cor-Ten steel overlaid with Ultra-Glide plastic liners
- Cor-Ten prevents rusting of the lower mixing chamber
- Ultra-Glide plastic is unaffected by moisture & acid, while helping to reduce friction & power required during mixing. Ultra-Glide plastic can be replaced quickly & at relatively low cost.
Full Control During Loading
Kverneland 600 series offer a highly accurate weighing system - the Kverneland TMRscale
The Weighing System
The 3 heavy duty weigh bars ensure long life and accuracy - an essential consideration when formulating
feed rations
Full Control During Loading
The easy to read display is mounted on a rotating arm that can be mounted either side of the machine and viewed during the loading and discharge operations
The Kverneland TMRscale
The Kverneland TMRscale is available in 3 formats:• 401 - simple up/down weigh scale• 402 - simple up/down weigh scale with remote control unit for all functions (excluding system on/off)• 403 - fully programmable weigh scale for multiple recipes with multiple components
The Remote Control
With the optional remote control (model TMRscale 402) the scale is easily reset from the loader between each feed component - ideal for loading and feeding by 1 person
Easy and Convenient Incorporation of All Material
The Kverneland 600 series is specifically designed to incorporate all feed formats into the ration without the
need for pre-chopping
Fast Incorporation of Even Two Bales
The combination of the two contra-rotating augers and the shear bar offers the possibility to cut & mix all material types in all formats
- even 2 bales at the same time!
Adding Minerals
Small amount of minerals and concentrates can be introduced into the ration via the loading grill at the
rear.
Even Distribution
All machines are prepared for distribution to 1 or 2 sides - discharge to left or right side independently or even simultaneously
– Discharge options include simple discharge chute …..
– ….. or PVC discharge conveyor in lengths from 0,65 to 2m
Conveyor Belt
The conveyor systems offer flexibility for discharge onto the floor, over feed barriers or into troughs.
Discharge height is controlled by the hydraulic lift cylinder
Fixed Discharge Chute
The fixed discharge chute is an ideal solution for low cost discharge or
when operating in narrow cow sheds
Two Doors for More Efficient Feeding
If necessary the Kverneland 600 series can be supplied with two doors for simultaneous distribution on left and right side
in one pass
Door Position Indicator
An easily visible graduated indicator at the front of the machine informs the driver regarding the discharge
door position
2 contra-rotating augers & circular knives with multiple
cutting edges – flexibility to cut and mix with the same
machine
1
Fully modular & adjustable central shear bar for cutting &
mixing all feed materials
2
Precise weighing system with remote control options for very easy operation
3
Multiple discharge options to suit the feeding method of
each farm
4
The 4 Arguments - 600 Series