kurukshetra institute of technology &...

60
[Type here] MANDATORY DISCLOSURE MANDATORY DISCLOSURE KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENT PEHOWA ROAD, KURUKSHETRA

Upload: others

Post on 29-Feb-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

MANDATORY DISCLOSURE

KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENT

PEHOWA ROAD, KURUKSHETRA

Page 2: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

I. NAME OF THE INSTITUTION

KURUKSHETRA INSTITUTE OF TECHNOLOGY &

MANAGEMENT, Bhor-Saidan, PEHOWA ROAD, KURUKSHETRA

II. NAME & ADDRESS OF THE DIRECTOR

Dr. Viraj Tyagi, Director-Principal Kurukshetra Institute of Technology & Management Bhor Saidan, Pehowa Road, Kurukshetra 136 119 (Haryana) Ph.No.01741 – 283841-42, Fax - 01741 - 283843, E-Mail: [email protected], [email protected]

III. NAME OF THE AFFILIATING UNIVERSITY

KURUKSHETRA UNIVERSITY, KURUKSHETRA

IV. BOARD OF GOVERNANCE

S.No. Name & Address Position

1. Sh. Satya Pal Aggarwal Chairman Aggarwal Polytubes, Pipli Road, Kurukshetra

2. Sh. Sudarshan Aggarwal Member Aggarwal Extrusions, G.T Road, Kurukshetra

3. Sh. Neeraj Aggarwal Member Aggarwal Extrusions, G.T Road, Kurukshetra

4. Ms. Mohita Aggarwal Member Aggarwal Extrusions, G.T Road, Kurukshetra

5. Sh. Rajat Aggarwal Member Aggarwal Extrusions, G.T Road, Kurukshetra

6. Nominee of the Regional Officer (ex-officio), Member

North-Western Regional Office, Plot No. 1A, 5th

Floor, Building of Directorate of Tech. Edu. & Industrial Training, (Government of Punjab),

Sector-36A, Chandigarh - 160036

7. An Industrialist/technologist/educationist from the region to be Member nominated by the Regional Committee as nominee of the AICTE

8. Nominee of the Kurukshetra University, Kurukshetra Member

9. Nominee of the Director-General, Member Technical Education, Haryana – (ex-officio), Bays 7-12, Sector 4,

Panchkula

10. An Industrialist/technologist/educationist from the region to be Member nominated by the State Government Haryana.

11. Dr. Sunil Dhingra, Professor Member Institute of Instrumentation Engg., Kurukshetra University Kurukshetra

12. Sh. Vinit Gupta Member Tikka Colony, Salarpur Road, Kurukshetra

13. Prof. (Dr.) P. J. George, Professor, Member Dept. of Electronics & Communication Engg., KITM, Kurukshetra

14. Er. Deepak Mittal, Incharge Member Dept. of Mech. Engg., KITM, Kurukshetra

15. Dr. Viraj Tyagi, Director-Principal Member- Secretary Director-Principal, KITM, Bhor-Saidan, Kurukshetra

Page 3: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Members of Academic Advisory Committee

1. Director-Principal Chairman

2. Mr. Parmod Singhal, Asst. Professor Member In-charge, DMS, KITM, Kurukshetra

3. Er. Deepak Mittal, Assistant Professor -do- In-charge, Dept. of Mechanical Engg.

4. Er. Nikhil Aggarwal, Assistant Professor -do- In-charge, Dept. of Electronics & Comm. Engg.

5. Er. Veenu, Assistant Professor -do-

In-charge, Dept. of Electrical Engg. & Dept. of H&AS

6. Er. Ashish Vashisht, Assistant Professor In-charge, Dept. of Computer Science & Engg.

-do-

7. Sh. Sunil Sharma, Assistant Professor -do-

TPO

8. Sh. Vijay Pandey Convener Registrar

Frequency of the board meetings and academic advisory body

At least 3/4 meetings of the Board will be held in a year.

At least 2/3 meetings of Academic Advisory Committee in a semester.

Organizational chart and processes

The Director/Principal is the Chief Executive of the Institute supervising the academic as well

as the administrative areas of the Institute. The Heads/In-charges of departments supervise

their respective departments whereas the administrative area is under the control of the

Registrar.

The organization is given as under:

Page 4: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Nature & Extent of involvement of faculty and students in academic affairs/ improvements

The members of the faculty are associated for taking decisions with regard to the academic affairs so that the same are managed in a democratic way. Regular meetings of the faculty are held in order to monitor the academic affairs of the Institute. The students’ representatives are associated with committees dealing with students' affairs, cultural affairs, sports etc.

Mechanism/Norms & Procedure for democratic/good Governance

The Institute has a mechanism for managing the academic and administrative matters by involving the members of faculty, students and staff inculcating in them a sense of self-imposed-discipline for good governance and creating an environment conducive to good academics.

Student Feedback on Institutional Governance/faculty performance

A mechanism of feedback from the students in respect of faculty is introduced to appraise the performance of the faculty through a questionnaire system having transparency as well as confidentiality.

Online Grievance Redressal Mechanism for Faculty, Staff and Students

In the Institute, “Personal Counseling” groups have been formed by allocating a

group of students to a teacher, so that they can discuss their academic or any other

problem in the Institute. There is also a ‘Women Cell' to take care of the issues

related to women staff & students. For the feedback and redressal of grievances of

parents, staff and students, an ONLINE feedback/grievance redressal system is in

force through the website of the Institute. They can approach Director-Principal

through their Head/In-charges of Departments also.

PROGRAMMES

Name of the Programmes approved by the AICTE

Bachelors of Technology (B. Tech)

4 Year and 3 Year (under lateral entry) Full Time Programmes

Branches Intake Management Seats Intake Management Seats

(1st

year) (1st

year) (2nd

year) (2nd

year)

Computer Sc. & Engg. 60 15 12 3

Electronics & Comm.Engg 30 7 6 2

Mechanical Engg. 60 15 12 3

Electrical Engg. 30 7 6 2

Masters of Technology (M. Tech.)

2 Year, Full Time Programmes

Branches Intake Management Seats

(1st

year) (1st

year)

Electronics & Comm.Engg 18 4

Computer Sc. & Engg. 24 6

Bachelors in Business Administration (BBA)

3 Year, Full Time Programme

Seats: Total-60 | Management-15

Page 5: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

-

Master of Business Administration (MBA)

2 Year, Full Time Programme

Seats: Total-60 | Management-15

Placement Facilities:

A large number of reputed organizations have conducted their placement activities

for our students and eligible students were offered jobs.

Campus placement in last three years with minimum, maximum and average Salary.

Highest package offered 4.60 p.a.

Lowest package offered 1.00 p.a.

Average package offered 2.80 p.a.

List of Companies/Placements for year 2017-18 and List of star Alumni for KITM.

Sr.

No.

Company Name Branch Package Venue ( Date ) Campus

Drive

1 Sark Industries Pvt.

Ltd.

Chandigarh

Mechanical

Engineering

1.2 LPA KITM College

(07/02/2018)

On Campus

2 Micro Turner Pvt.

Ltd.

Nalagarh (H.P.)

Mechanical

Engineering

1.3 LPA KITM College

(07/02/2018)

On Campus

3 Samvi E-Commerce

Private Ltd.

(Amazon Partner)

Sonipat

MBA , BBA 1.65+

Incentive

KITM College

(24/01/2018)

On Campus

4 HCL

Noida

Computer

Engineering

1.3 LPA KITM College

Jan 2018

On Campus

5 Radiate Pvt Ltd.

Noida

MBA , BBA 1.6 LPA KITM College

Jan 2018

On Campus

Page 6: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

6 Green Sky

Consultant Pvt. Ltd.

Karnal

MBA 1.1 GSC Karnal Off Campus

7 Net 2 Source Pvt.

Ltd. Noida

B.Tech , MBA 3 LPA MMU Mullana Off Campus

8 Metro Tyres Pvt.

Ltd.

Gurgaon

Mechanical ,

Electrical

Engineering

1.5 LPA SKIET ,

Kurukshetra

Off Campus

9 Image Infosystem

Pvt. Ltd.

Delhi

Computer

Engineering

2.25 LPA MMU Mullana Off Campus

10 Punjab Mandi Board Computer

Engineering

1.5 LPA ECG ,

Chandigarh

Off Campus

11 Job Fair at SGI

Campus Panipat

B.Tech( All

Stream) &

MBA

1.8 LPA

Avg.

SGI Campus,

Panipat

Off Campus

12 MRF Tyre Electrical

Engineering

4.0 LPA Chitkara

University

Chandigarh

Off Campus

13 Selling Simplified

India Pvt. Ltd. Noida

Computer

Engineering

3.6 LPA Selling

Simplified India

Pvt. Ltd. Noida

(January 2018)

Off Campus

14 Barrier Break

Solutions Pvt. Ltd.

Mohali (Pb.)

Computer

Engineering

3.0 LPA Barrier Break

Solutions Pvt.

Ltd.

Off Campus

15 Pricewaterhouse

Coopers(PwC)

MBA 1.8 LPA MMU Mullana

(Feb.2018)

Off Campus

16 Mijo Auto Gas Pvt.

Ltd. Badli, New

Delhi

Mechanical

Engineering

1.44 LPA Mijo Auto Gas

Pvt. Ltd. Badli,

Off Campus

Page 7: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

New Delhi

17 Shri Ram Transport

Finanace Co. Ltd.

B.Tech( All

Stream) &

MBA

2.44 LPA MMU Mullana Off Campus

18 Trigent Software

Pvt. Ltd. Banglore

Computer

Engineering

2.44 LPA Guru Nnanak

Institute Ambala

Off Campus

19 Insergo

Technologies

Dehradoon HP

Mechanical

Engineering

2-5 LPA Insergo

Technologies

Dehradoon HP

On Campus

Campus

20. Paytm Payment

Bank New Delhi

MBA, BBA,

B.Tech.

2.1 LPA KITM College

16/03/2018

On Campus

Campus

21. Jskilz Mnagement

Pvt. Ltd.

B.Tech.

Computer

Engineering

1.2-4 LPA SGI Campus,

Panipat

Off Campus

22. Adaan Digital

Solution Pvt. Ltd.

B.Tech.

Computer

Engineering

TERII Colege

Kurukshetra

05/04/2018

Off Campus

23. Perfect Genrator

Tech. Pvt. Ltd

B.Tech.

Electrical ,

Mechanical

1.5 LPA Karnal Institute

Tech.

20/03/2018

Off Campus

24. Axis Securities MBA 1.8 LPA KITM College

On Campus

25. KBIHM Chandigarh B.Tech.

Computer

Engineering

1.2-1.5

LPA

RIMT

University

02/04/2018

Off Campus

26. Consent Elevator MBA 1.8-25 LPA SGI Campus,

Panipat

Off Campus

List of star Alumni for KITM

Sr.

No. Name

Batch/Br

anch

Designation and

Organization

Pack

age. Contact.No/ E mail Id

in

LPA Whatsaap

1

Aashutosh

Dogra 2015(ME)

Marine Engineer, Anglo Eastern

20.4 8930549805

[email protected]

om Hongkong Based

Company

Page 8: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

2 Ishan Misri

2007(CSE

)

Senior Software Engg., Cognizant

12.4 9416035809

[email protected]

m Technology Solutions

3

Rahul

Sharma

2009(CSE

)

Senior Analyst,

Accenture 12.2 9873510015

[email protected]

4

Sahil

Sharma

2008(CSE

)

Senior Software Engg., IOmedia

12 9560444809

sahil.bmsharma@gma

il.com India Pvt. Limited

5

Vaibhav

Verma 2014(ME)

Executive, Honda Motorcycles &

11.5 9996061199

vermavaibhav52@gm

ail.com Scooters, Gurgaon

6

Akshay

Gosain 2012(ME)

Executive, Honda

Motorcycles & 11.5 9996848588

akshayrgosain@gmail

.com Scooters, Gurgaon

7 Om Prakash

2014(MB

A)

Electrical Engineer, Indian Oil

11

8789421583/

Omprakash030@gmai

l.com Corporation Limited,

Gawhati 9996205395

8 Mohit Garg 2013(ME)

Executive, Honda Motorcycle &

11 9468450111

mohitnarwana@gmail

.com Scooter, Bangalore.

9

Amrendra

Singh

2007(ECE

)

Associate Lead, Nagarro Software

9 9582137369

engr.amrendra@gmai

l.com Private. Limited

10

Sahil

Khanna 2013(ME)

Design Engineer, Stryker Global

9 9802047922

er.sahilkhanna50@gm

ail.com Technology

11 Nitin Garg

2008(CSE

)

System Engineer, Tata

8.5 9541647590

nitin.garg.8161@gmai

l.com Consultancy

Services(TCS)

12

Sahil

Sharma

2007(CSE

)

Suprintendent, Central

8.5 9034434707

er.sahil60469@gmail.

com Warehousing

Corporation

13 Abhimanyu

2007(CSE

)

ADC to Governer of Rajasthan,

8.3 9812317139

abhimanyusingh.in@

gmail.com Singh Indian Army

14

Shashi

Bhushan

2007(ECE

) SC/TO, Delhi Metro 8 9911889061

[email protected]

m

Page 9: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

Name and duration of programme(s) having affiliation/collaboration with Foreign University(s)/ Institution(s) and being run in the same Campus along with status of their AICTE approval. If there is foreign collaboration, give the following details:

-Not Applicable-

Page 10: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

VI. FACULTY

Faculty: Student Ratio

The faculty student ratio is 1:20.

Page 11: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

VII. Profile of Director/Principal with Qualifications, Total Experience, Age and Duration of Employment at the Institute concerned

DIRECTOR-PRINCIPAL OF THE INSTITUTION

Name of Teaching Staff Dr. VIRAJ TYAGI

Designation Director- Principal

Department NA

Date of joining the Institute 26th

Sept.2007 as HOD, Mechanical Engg.

24th

Sept.2015 as Principal

27th

Sept. 2017 As Director-Principal

Qualifications with class / grade UG B.E. in Mech. Engg. PG M. Tech. in Mech. Ph.D. in Mech. Engg.

from Amravati Engg. from PTU, from NIT,

University Jalandhar Kurukshetra

Total experience in years Teaching 20 Years Industry 5 Years Research

6 years

Papers published in National 02 International 03

Journals

Papers published in conferences National International 1

Books published / IPRs / patents Written one article in the proceedings of a Workshop of soft computing.

Professional membership Life member of ISTE

Awards Got Bronze Medal for securing “2nd position in University”, in B.E. final year examination.

Interaction with professional institutions Worked as Member of Board of Studies, Mechanical Engg. at Kurukshetra University, Kurukshetra.

Page 12: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Founder Director-Principal of the Institute

Name of Teaching Staff Dr. P. J. George

Designation Professor

Date of joining the institute 1st

May 2007

Qualifications with class / grade B.Sc. 1st M.Sc. 1st PhD- Yes M. Tech

Total experience in years Teaching 31 Years Industry N.A. Research

36 Years

Papers published National 25 International 30

Papers published in conferences National N.A. International N.A.

PhD Guide? Give field &University Guide: Field:

University

Prof. D.K.

Semiconductor Electronics with emphasis on IIT, Delhi

Roy

Physics and Technology of Semiconductor

devices

PhDs/Projects Guided PhDs 20 Projects at 12

master level

Books published / IPRs / patents N.A.

Professional membership IEEE & IETE

Consultancy Activities DRDO projects

Awards N.A.

Grants fetched 9 Lacs from DRDO at KITM, Kurukshetra, 22 Lacs at Kurukshetra University

Interaction with professional institutions N.A.

Page 13: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Er. Deepak Mittal

Designation Assistant Professor & Incharge

Department Mechanical Engineering

Date of joining the Institute 08.08.2011

Qualifications with class / grade UG PG

B-Tech. M-Tech.

Total experience in years Teaching Industry

11 Years Nil

Papers published in National

International

02 Nil

Journals

Papers published in conferences National 01 International Nil

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 14: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Er. Yogesh Gupta

Designation Assistant Professor

Department Mechanical Engineering

Date of joining the Institute

25/08/2010

Qualifications with class / grade UG PG

B-Tech. M-Tech.

Total experience in years Teaching Industry Nil

09 Years

Papers published in National International

Journals

Papers published in conferences National 02 International

01

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 15: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Er. Ashish Vashisht

Designation Assistant Professor & Incharge

Department

Computer

Science & Engineering

Date of joining the Institute 19.08.2009

Qualifications with class / grade UG PG

B-Tech. M-Tech.

Total experience in years Teaching Industry

12 Years 1 Year

Papers published in National

International

07 Nil

Journals

Papers published in conferences National 03 International Nil

Books published / IPRs / patents

Professional membership

Member of IAENG, Ex member of

CSI

Awards

Interaction with professional institutions

Page 16: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Er. Gurmeet Singh

Designation Assistant Professor

Department

Computer

Science & Engineering

Date of joining the Institute

08/08/2011

Qualifications with class / grade UG PG

B-Tech. M-Tech.

Total experience in years Teaching Industry Nil

08 Years

Papers published in National 3 International 5

Journals

Papers published in conferences National 2 International 4

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 17: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Priyanka Badyal

Designation Assistant Professor

Department

Computer

Science & Engineering

Date of joining the Institute

26 Feb 2018

Qualifications with class / grade UG PG

B.Tech. M.Tech.

Total experience in years Teaching Industry

3 Months

Papers published in National International

Journals 1

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 18: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff SUNIL SAINI

Designation ASSISTANT PROFESSOR

Department CSE

Date of joining the Institute 10-08-2009

Qualifications with class / grade UG B.TECH. PG M.TECH.

Total experience in years Teaching 9YEARS Industry

Papers published in National NIL International 10

Journals

Papers published in conferences National 02 International NIL

Books published / IPRs / patents

NIL

Professional membership

NIL

Awards

NIL

Interaction with professional institutions

NIL

Page 19: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Er. Kanika Soni

Designation Assistant Professor

Department

Computer

Science &

Engineerin

g

Date of joining the Institute 2 August 2018

M.

Qualifications with class / grade UG B.Tech. PG M.Tech.

Total experience in years Teaching 1Month Industry

Papers published in National NA International NA

Journals

Papers published in conferences National NA International NA

Books published / IPRs / patents NA

Professional membership NA

Awards NA

Interaction with professional institutions NA

Page 20: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Name of Teaching Staff NIKHIL AGGARWAL

Designation ASSISTANT PROFESSOR

Department ECE

Date of joining the Institute

01/09/2008

Qualifications with class / grade UG B.TECH. PG M.TECH.

Total experience in years Teaching 10 Industry

Papers published in National International 2

Journals 1

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 21: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Deepak Puri

Designation AP

Department ECE

Date of joining the Institute

20 Augest 2018

Qualifications with class / grade UG

B.Tech.

PG M.Tech.

Total experience in years Teaching 11 years 1 months Industry nil

Papers published in National International nil

Journals nil

Papers published in conferences National nil International nil

Books published / IPRs / patents

nil

Professional membership

nil

Awards

Nil

Interaction with professional institutions Nil

Page 22: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Dimpy Ahuja

Designation AP

Department ECE

Date of joining the Institute

26 Feb 2018

Qualifications with class / grade UG PG

B. Tech. M. Tech.

Total experience in years Teaching Industry

4.5

Papers published in National International

Journals 3

Papers published in conferences National International

1

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 23: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Name of Teaching Staff VEENU

Designation AP

Department EE

Date of joining the Institute 11.8.2008

Qualifications with class / grade UG B.Tech. PG M.Tech.

Total experience in years Teaching 10 Industry

Papers published in National 02 International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 24: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Parmod Rani

Designation Assistant professor

Department

Applied

Science

Date of joining the Institute 03-08-2018

Qualifications with class / grade UG B.Sc (Non Medical ) PG

M.Sc (Math )

M.Phil

Total experience in years Teaching 12yrs Industry

Papers published in National International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 25: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Ms. Upasna

Designation

A.P. In

Physics

Department

Applied

science

Date of joining the Institute 16-01-2017

Qualifications with class / grade UG Bsc.(non-medical) PG Msc(physics)

Total experience in years Teaching 7years Industry

Papers published in National International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 26: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Dr. Pallavi Sinha

Designation Assistant Professor

Department

Applied

Science

Date of joining the Institute 06/08/2018

Qualifications with class / grade UG BSc PG MSc

MPhill

PhD

Total experience in years Teaching 11 years Industry …..

Papers published in National 03 International 12

Journals

Papers published in conferences National International 09

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 27: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Parmod Kumar

Designation Assistant Professor & In-Charge

Department

Dept. of

Management

Studies

Date of joining the Institute 09-01-2015

Qualifications with class / grade UG B.Com PG MBA

Total experience in years Teaching 10 Years Industry

Papers published in National

Internatio

nal

14 2

Journals

Papers published in conferences National Internatio

nal

Books published / IPRs / patents

Professional membership

Reviewer member of Emerald Group Publishing Limited

journals.

Editorial Board member of International Journal of

Management Science & Business Research

Awards

Interaction with professional institutions

Page 28: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Sunil Kumar

Designation Assistant Professor

Department

Dept. of

Management

Studies

Date of joining the Institute

25-01-2017

Qualifications with class / grade UG

BA

PG

MBA

Total experience in years Teaching 12 Years Industry 1 Year

Papers published in National

International

3

Journals

Papers published in conferences National 2 International 3

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 29: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff ANJU JINDAL

Designation Assistant Professor

Department

Dept. of

Management

Studies

Date of joining the Institute 18-08-2008

Qualifications with class / grade UG

B.com.

PG

M.com

MBA

Total experience in years Teaching Industry

10 0

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 30: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Sahil Garg

Designation Assistant Professor

Department

Dept. of

Management

Studies

Date of joining the Institute

26-02-2018

Qualifications with class / grade UG

B.Com

PG

MBA

Total experience in years Teaching Industry

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 31: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Anjali David

Designation Assistant Professor

Department

Dept. of

Management

Studies

Date of joining the Institute

01-02-2012

Qualifications with class / grade UG

B.Com.

PG

MBA

Total experience in years Teaching Industry

9 Years

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 32: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Neha Chaudhary

Designation Assistant Professor

Department

Dept. of

Management

Studies

Date of joining the Institute

11-01-2016

Qualifications with class / grade UG

B.Com

PG

MBA

Total experience in years Teaching Industry

8 Years

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 33: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Sourabh Ahuja

Designation Assistant Professor

Department

Dept. of

Management

Studies

Date of joining the Institute

01-03-2012

Qualifications with class / grade UG

BA

PG

MBA

Total experience in years Teaching 10 Years Industry

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 34: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

Name of Teaching Staff Sudhanshu Sharma

Designation Assistant Professor

Department

Dept. of

Management

Studies

Date of joining the Institute 04-08-2014

Qualifications with class / grade UG

B.Com

PG MBA

Total experience in years Teaching Industry 12 Years

8 Years

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 35: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

Name of Teaching Staff Er. Ruby Gupta

Designation Assistant Professor

Department Dept. of ECE

Date of joining the Institute 08-08-2011

Qualifications with class / grade UG

B.Tech.

PG M.Tech.

Total experience in years Teaching Industry

4 Years

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 36: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

Name of Teaching Staff Ms. Ritika Goel

Designation Assistant Professor

Department Dept. of English

Date of joining the Institute 21-12-2017

Qualifications with class / grade UG

B.Com

PG MBA

Total experience in years Teaching Industry

1 Years

Papers published in National

International

Journals

Papers published in conferences National International

Books published / IPRs / patents

Professional membership

Awards

Interaction with professional institutions

Page 37: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

VIII. FEE

Details of fee as approved by State fee Committee for the Institution:

Tuition Fee (B.Tech. & M.Tech.) = Rs. 53500/- per annum

Development Fund (B.Tech. & M.Tech.) = Rs. 12500/- per annum

Tuition Fee (M.B.A.) = Rs. 30000/- per annum

Development Fund (M.B.A.) = Rs. 5000/- per annum

Tuition Fee (BBA) = Rs. 20000/- per annum

Development Fund (BBA) = Rs. 5000/- per annum

Time schedule for payment of fee for the entire programme:

The fee is charged semester-wise.

No. of Fee waivers granted with amount and name of students: -Nil-

Number of scholarship offered by the institute, duration and amount

- The scholarship/financial assistance is offered to meritorious students on the basis of

merit in the qualifying examination. - Awards are given to University rank holders and other meritorious student on the basis of merit of

semester examination of University.

Criteria for fee waivers/scholarship:

- Academic Merit

Estimated cost of boarding and Lodging in Hostels:

Rs. 50,000/- per annum for twin sharing (including boarding and lodging).

Rs. 60,000/- per annum for single (including boarding and lodging).

IX. ADMISSION

No. of seats sanctioned with the year of approval:

Year 2017-18 300 (B.Tech.)+ 42 (M.Tech.)+ 60 (MBA)+ 60 (BBA)

Year 2018-19 180 (B.Tech.)+ 42 (M.Tech.)+ 60 (MBA)+ 60 (BBA)

The year of approval is 2007-2008. )

Page 38: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

X. ADMISSION PROCEDURE

Mention the admission test being followed, name and address of the Test Agency and its URL (website).

The admissions were made by the State Govt. of Haryana through “Online Counseling” on the basis of JEE Mains rank.

Number of seats allotted to different Test Qualified candidates separately

The sanctioned intake in private unaided institutions for B.Tech. Course shall be distributed as

under:-

i. 50% seats of sanctioned intake (including 25% management quota) of their AICTE approved

B.E./B.Tech. course at their own level firstly on the basis of All India Rank obtained in JEE (MAIN)-

2018 and thereafter on the basis of merit of marks secured in qualifying examination in a fair and

transparent manner.

ii. 50% of sanctioned intake shall be filled through HSTES.

The admissions of 50% of sanctioned intake in Private Unaided Institutes shall be done by HSTES as per

Reservation Policy notified by the State Government of Haryana.

Calendar for admission against

Management seats Vacant Seats

Last date for submission of application

15.08.2018 15.08.2018

Last date for closing of admission 15.08.2018 15.08.2018

The policy of refund of the fee, in case of withdrawal, should be clearly notified

Page 39: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

The policy as stipulated by the State Govt. of Haryana/AICTE is followed.

XI. CRITERIA AND WEIGHTAGES FOR ADMISSION

Describe each criteria with its respective weightages, i.e., admission test, marks in qualifying examination, etc.

Admissions were made by State govt. of Haryana /AICTE through „Online Counseling‟ on the basis of

JEE Mains rank.

Management seats/Vacant seats are filled on the basis of JEE mains rank/merit in the qualifying

examination.

Mention the minimum level of acceptance, if any.

Minimum eligibility criteria as prescribed by AICTE/State Govt. Of Haryana/ Kurukshetra University, Kurukshetra

Mention the cut-off levels of percentage & percentile scores of the candidates in the

admission test for the last three years.

-Not Applicable-

Display marks scored in test, etc., and in aggregate for all candidates who were admitted.

-Not Applicable-

XII. APPLICATION FORM

Admissions were made by State Govt. of Haryana through “Online Counseling”/Institute on the merit

of qualifying examination.

XIII. TEAM FOR ADMISSION:

Composition of selection team for admission under Management Quota with the brief profiles of members.

The composition of Admission committee is as under:

Name Designation Department

Mr. Parmod Singhal Asstt. Professor MBA

Mr. Saurabh Ahuja Asstt. Professor MBA

Er. Ashish Vashisht Asstt. Professor Computer Science & Engg

Er. Veenu Asstt. Professor EE

Ms. Upasana Asstt. Professor Humanities & App. Sciences

Ms. Anju Jindal Asstt. Professor MBA

Mr. Vijay Pandey Registrar Admin

Mr. Sai Govinda PRO Admin.

Page 40: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

XIV. Information on infrastructure and other resources available of Library: Number of Library books /Titles/Journals available (programme-wise)

Discipline Books Titles Journals

(Vols.)

National International

Computer Science 5210 1134 3 9

& Engg.

Electronics & 3157 678

Communication 3 3

Engg.

Mechanical Engg. 2609 645 1 5

Electrical Engg. 668 153 3 3

Applied Sciences 2036 615 0 4

MBA 2590 491 5 8

E- Books 950 100

Total 17220 3816 15 32

Page 41: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

List of National/ International Journals subscribed

Total = 47.

E-Library facilities

o Available

Laboratories & Workshops

o List of Major Equipment/Facilities

MECHANICAL ENGINEERING

WORKSHOP

S.No. ITEM-PARTICULARS Qty.

1. Lathe Machine 5'-3" Medium duty With Tools & Accessories. 3 Nos

2. Milling Machine With Tools & Accessories. 1 Nos

3. Shaping Machine With Tools & Accessories. 1 Nos

4. Portable Drilling Machine With Tools & Accessories. 1 Nos

5. Drilling Machine 3/4" capacity With Tools & Accessories. 1 Nos

6. Drilling Machine 1/2" capacity With Tools & Accessories. 1 Nos

7. Bench Grinder 1 H.P. 1 Nos

8. Hand Drilling M/C 2 Nos

9. Double Ended Bench Grinder 1/2 H.P. 3 Nos

10. 8" Hydraulic Power Hacksaw With Accessories.(M/c Shop) 1 Nos

11. 7" Hydraulic Power Hacksaw With Accessories.(Fitting shop) 1 Nos

12. AC Arc Welding Set. 2 Nos

13. Wooden Turning Lathe Machine. (Carpentry shop) 1 Nos

14. Hand Grinder. (Welding shop) 1 Nos

15. Working Bench 8'x4'x34" Ht. 8 Nos

16. Bench Vice No.4 12 Nos

17. Working Bench (wooden) 6'x4'x34" Ht. 4 Nos

18. Carpentry vice 12 Nos

19. CNC Late Trainer 01 Nos

20. Profile Projector 01 Nos

21. Surface Grinder 01 Nos

22. Tool and cutter Grinder 01 Nos

23. TIG welding set 01 Nos

24. MIG welding set 01 Nos

25. Different Tools of Welding Shop. Available

26. Different Tools of Fitting Shop. Available

27. Different Tools of Sheet Metal Shop. Available

28. Different Measuring Instruments. Available

29. Different Tools of Smithy Shop. Available

30. Different Tools of Foundry Shop. Available

31. Different tools and accessories of Machine shop Available

32. Different Tools of carpentry Shop. Available

Page 42: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

STRENGTH OF MATERIAL LAB

Sr. No. Details of Items Qty

1. Brinell & Rockwell Hardness Tester 1

2. Erichson Sheet Metal Tester 1

3. Impact Testing Machine 1

4. Universal Testing Machine 1

5. Torsion Testing Machine 1

6. Beam Apparatus 1

7. Fatigue Testing Machine 1

KINEMATICS OF MACHINES LAB

Sr. No. Details of Items Qty

1 Spring Tester 1

2 Friction Apparatus 1

Apparatus for finding the Modulus of Rigidity of 1

3 Shaft

4 Crank and Slotted Lever (QRM) Apparatus 1

5 Screw Jack 1

6 Cam Apparatus 1

7 Friction Belt & Pulley Apparatus 1

8 Slider Crank Mechanism 1

9 Study of the inversions of single sliders crank 1

10 Bell crank lever 1

THERMODYNAMICS LAB

Sr. No. Details of Items Qty

1. Two stroke petrol engine (Model) 1

2. Two stroke diesel engine (Model) 1

3. Four stroke petrol engine (Model) 1

4. Four stroke diesel engine (Model) 1

5. Babcock-Wilcox Boiler (Model) 1

6. Locomotive Boiler (Model) 1

7. Lancashire Boiler (Model) 1

8. Nestler‟s Boiler (Model) 1

9. Steam engine (Model) 1

10. Vertical Steam Engine ( Piston valve type) 1

11. Flash Point Apparatus 1

12. Viscometer Apparatus 1

Page 43: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Dynamics of Machine Lab

Sr. No. Details of Items Qty

1. Moment of Intertia of Fly wheel 1

2. Whirling of Shaft Demonstrator 1

3. Motorized Gyroscopic Couple 1

4. Static & Dynamic Balancing Apparatus 1

5. Epicyclic Gear Train Apparatus 1

6. Universal Governor Apparatus 1

7. Models of different types of Brakes (4, types) 1

8. Coriolli,s component of acceleration Apparatus 1

FLUID MECHANICS LAB

Sr. No. Details of Items Qty

1. Apparatus For Impact Of Jet On Vanes 1

2. Apparatus For Venturimeter & Orificemeter 1

3. Apparatus For Discharge Oaver Notches 1

(V, Rectangular And Trapezoidal Types )

4. Apparatus For Loses Due To Friction In Pipe Lines 1

5. Apparatus For Flow Through Orifice And Mouthpieces 1

6. Apparatus For Bernoulli‟s Theorem Apparatus 1

7. Apparatus For Reynold‟s Apparatus 1

8. Apparatus For Metacentric Height Apparatus 1

9. Apparatus For Losses Due To Pipe Fittings, Sudden Enlargement &

1 Contraction

Page 44: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

THERMAL ENGINEERING LAB

Sr. No. Details of Items Qty

1. Four stroke single cylinder water cooled vertical diesel engine 1

2. Four stroke four cylinder water cooled diesel engine 1

3. Four stroke four cylinder water cooled petrol engine 1

4. Two stage reciprocating compressor (with inter-cooler) test rig 1

5. Centrifugal Blower Test Rig. 1

6. Model of Gas turbine 1

7. Model of Wankle engine 1

8. Model of lubrication of an I.C. Engine 1

9. Model of cooling system of an I.C. Engine 1

10. Model of Fuel injection system of a C.I. Engine 1

11. Model of Battery Ignition system of a S.I. Engine 1

12. Model of braking system of an automobile (Hydraulic Brake)

FLUID MACHINES LAB

Sr. No. Details of Items Qty

1. Centrifugal pump test rig 1

2. Hydraulic ram Test rig 1

3. Reciprocating pump test rig 1

4. Gear pump test rig 1

5. Pelton Wheel Turbine Test 1

6. Francis Turbine Test Rig 1

7. Kaplan Turbine Test Rig 1

HEAT TRANSFER LAB

Sr. No. Details of Items Qty

1. Apparatus for Thermal conductivity of a metal rod 1

2. Apparatus for Thermal conductivity of insulating powder 1

3. Apparatus for Thermal conductivity of liquids using guard plate method 1

4. Apparatus for Heat Transfer through composite wall 1

5.

Apparatus for Heat transfer from a pin- fin 1

( Free and forced convection )

6. Apparatus for Forced convection heat transfer from cylindrical surface 1

7.

Apparatus for Effectiveness of a heat exchanger ( parallel flow / 1

counter flow )

8. Apparatus for Stefan- Boltzman 1

9. Apparatus for Critical heat flux 1

Page 45: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

ELECTRONICS & COMMUNICATIONS ENGINEERING

DSP/ Verilog HDL/ S&S LAB/AWP

S. No. Name of Item Total Quantity

Xilink Softwere (25 User)

1 Universal Fpga/Cpld Development Boardfollwing Interfacing

1

Traffic Light Control

Stepper Motor Control

Relay Bazzer Card

2 Del Des 360x1 Dc With (Del- Tft-19") User 23

3 Del Des 360x1 Dc With (Del- Tft-19") Server 1

4 Del Des 360x1 Dc With (Del- Tft-18.5") User 1

5 Del Des 380x1 Dc With (Del- Tft-16.5") User 3

6 Ups 1

7 Dsp Traineer Kit 1

8 MULTISIM, (25 User) 1

9 Matlab Simulink+ Signal Processing Toolbox+Dsp System Toolbox+ Comm.

1

System Toolbox

Project Lab

S. No. Name of Item Total Quantity

1 Function Generator 4

2 Dso 2

3 Cro 30 Mhz Dual Channel, 2 Trace 1

4 Digital Multimeter (Dt-830d) 3

5 Extensions 4

6 Handy Universal Programmer 1

7 Pcb Drill Machine 1

8 Iron 1

BEE/EDC/ ED/AE Lab

S. No. Name of Item Total Quantity

1

Ripple Factor Apparatus 2

(Model No: Me579d)

2 H' Parameter Of Pnp Transistor In Common Emitter (Model No: Me 532 D) 2

3.

Transistor Char. Apparatus With Reg. Power Supply & Four Analog Meters 2

(Me-533d)

Page 46: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

4 Two Stage Rc Coupled Amplifier (Me-619) 2

5 Studay Of Hartley Oscillator(Me-661) 2

6 Studay Of Phase Shift Oscillator(Me-664) 2

7 Common Emitter Transistor Amplifier (Single Stage Amp.)

2 (Me-618)

8 Applications Of Operational Amplifiers(Discrete Component Trainer)

2 (Me-627)

9 Cro 20 Mhz(Me-3020) 1

10 Cro 20 Mhz With Component Tester

2 (Me-3020 Ct)

11 Function Generator

6 5 Mhz (Me-957)

12 Digital Power Supply

2 0-30 Vdc/ 2amp (Me-230)

13 Bread Board Trainer (Me-1150 A) 10

14 Function Generator

4 (10 Mhzst-4061)

15 Digital Multi Meter

6 (Dt-830d)

16 Digital Multi Meter

6 (Ms-8215)

17 Digital Multi Meter

2 (Vc-97)

18 Digital Multi Meter

3 (Vc-890d)

19 Cro 20mhz (St-201c) 2

20 Dso (025c2 25) 1

21 Digital Multimeter(Dmm-10) 2

22 Function Generator (Fg002,2mhz)

1

23 Bread Board Trainer Kit(B.No. 1434) 10

24 Digital Trainer Kit 2

MICROPROCESSOR LAB (A-311)

S. No. Name of Item Total Quantity

1 8085 Microprocesser Trainer Kit (Vmc-8501) 10

2 8086microprocesser Trainer Kit With (Keyboard) (Vinytics-8609) 8

3 8086microprocesser Trainer Kit With (Key Board) (Vmc-8609 ) 2

4 Stepper Motor Controller Card & Stepper Motor(9308) 1

5 Led Interfacing Card 8255 With (Key Board) 8255 1

6 ADC( CARD VINYTICS) 1

7 DAC (CARD VINYTICS) 1

8 KEYBOARD 2

AC LAB (A-401)

Page 47: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

S. No. Name of Item Total Quantity

1 CRO20MHZ,DUALCHANNEL,2TRACE(SS-5020D) 2

2 CRO30MHZ,DUALCHANNEL,2TRACE(OS-5030) 3

3 FUNCATION GENERATOR UP TO 10 MHZ (807372/MARS) 1

4 FUNCTION GENRATOR UPTO 1MHZ.(FG-100D) 1

5 DSB-SC AM DEMODULATOR KIT(JLM-B. NO.5663) 1

6 FREQUNCY MODULATION AND DEMODULATION KIT

1 ( GE434)

7 SIGNAL SAMPLING & RECONSTRUCTION KIT (JLM - B.

1 NO.5663)(JOLLY)

8 PULSE AMPLITUDE MODULATION AND DEMODULATION KIT

1 ( JLM-B. NO.5663)

9 PULSE WIDTH MODULATION AND DEMODULATION KIT JLB. NO.5663 1

10 PULSE POSITION MODULATION AND DEMODULATION KIT

1 ( JLM B.NO.5663)

11 SUPERHETRODYNE RECEIVER KIT (STS2202/SCIENTIC) 1

12 DSO ( 025C2-25MHZ) 1

13 DIGITAL MULTI METER

1 ( DMM-10,3 ¾)

14 FUNCTION GENERATER (FG002,2MHZ) 5

15 CRO 20 MHZ (SCIENTECH/201C) 2

16 AMPLITUDE MODULATION TRANSMITTER (ACL-01) 2

17 AMPLITUDE DEMODULATION TRANSMITTER (ACL-02) 2

18 PAM,PWM,PPM MODULATION & DEMODULATION (DCL-08) 1

19 ACTIVE FILTER (SIBA INDIA) 1

20 APPLICATIONS OF OPERATIONALAMPLIFIERS

1 (DISCRETE COMPONENT TRAINER) (ME627)

21 FREQUANCY MODULATION TRAINER KIT(ACL-03) 1

22 FREQUANCY DEMODULATION TRAINER KIT(ACL-04) 1

DIGITAL COMM. LAB/M.TECH

S. No. Name of Item Total Quantity

1 FUNCTION GENERATER(FG002,2MHZ) 12

2 FUNCTION GENERATOR 10 MHZ AM-FM(MARS) 2

3 FUNCATION GENERATOR UP TO 1MHZ 8

4 CRO 20 MHZ , DUAL CHANNEL, 2 TRACE(SS-5020D) 6

5 DSO(025C2-25MHZ) 9

6 DIGITAL MULTI METER(DMM-10,3 ¾) 8

7 AMPLITUDE MOULATIONTRANSMITTER KIT(ACL-01) 2

8 AMPLITUDE DEMOULATION RECEIVER KIT(ACL-02) 2

9 FIBER OPTIC COMMUNICATION TRAINER KIT(LINK-A) 1

10 PAM TIME DIVISIONMULTIPLEXING/ DEMULTIPLEXING KIT(DCL-02) 1

Page 48: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

11 TDM PCM TRANSMITTER TRAINER SCIENTECH 1 (ST-2103)

12 TDM PCM RECEIVER TRANIER SCIENTECH 1 (ST-2104)

13 TDM PAM TRANIER SCIENTECH(ST-2102) 1

14 DELTA, ADAPTIVE & SIGMA DELTA SCIENTECH(M-2105) 2

15 FREQUANCY MODULATION TRAINER KIT(ACL-03) 1

16 FREQUANCY DEMODULATION TRAINER KIT(ACL-04) 1

17 ANALOG SIGNAL SAMPLING & RECONSTRUCTION KIT(DCL-01) 1

18 PAM, PWM, PPM, MOUDULATION & DEMODULATION KIT 2 (DCL-08)

19 PULSE CODE MODULATION KIT(DCL-03) 2

20 PULSE CODE DEMODULATION KIT 2 (DCL-04)

21 DATA CONDITIONING AND CARRIER MODULATION KITCL-05) 2

22 DATA RECONDITIONING AND CARRIER DEMOULATION KIT 2 (DCL-06)

23 OPTICAL FIBER TRAINER SCIENTECH(2502) 1

24 RFID APPLICATION SYSTEM 1

25 ISDN TRAINER 1

26 1.5 GHz SPECTURM ANALYZER WITH TRACKING GENERATOR 1

Microwave Lab

S. No. Name of Item Total Quantity

1 DSO(025C2-25MHZ) 1

2 MT-01 KLYSTRON BASED MICROWAVE BENCH 3

3 MT-GUNN DIODE BAISED MICROWAVE BENCH 1

4 Antenna Components For Polar Pattern And Gain Charactristics If Horn

1 Antennas

Passive Components For Magic Tee/Directional

5 Couplers/Isolators/ 1

Attenuators/Circulators

6 Dielectric Components For Dielectric

1 Constant Of Solid & Liquid

7 Stablizer(Bluebird)

1 (Skva)

AVE LAB

S. No. Name of Item Total Quantity

1 Colour Tv 1

2 Vcd Player 1

3 Tape Recorder 1

4 Digital Multi Meter(Dmm-10,3 ¾) 1

5 Dvd Player 1

Page 49: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Digital Electronics

S. No. Name of Item Total Quantity

1 OP- AMP AS VOLATAGE COMPARATOR USING IC 741(ME-638) 1

2 16-1 Line Multiplexer And 1-16 Line Demultiplexers Kit

1 (Me-720)

3 Study Of 4 Bit Counters Kit (Me-712) 1

4 4 Bit Shift Register Kit(Me-716) 1

5 Logic Gates Kit

1 (Me-675)

6 Flip Flop Kit(Me-702) 1

7 Encoder Decoder Kit(Me-718) 1

8 Universal Logicsystem Trainer/ Digital Ic Trainer Kit(Me-1152) 10

9 Ic Testing Kit

1 (B. No.1434)

LICA Lab

S. No. Name of Item Total Quantity

1 CRO 20 MHZ SCIENTIFIC – 201 C 9

2 Function Generator (Me-920) 9

3 Digital Multimeter (Vc-890d) 5

4 Instrumentation Amplifier (Me-645) 1

5 Linear Wave Shaping Ckt (Me-634) 1

6 Multivibrator Trainer (Me-650) 2

7 Op-Amplifier As Non Inverting Amplifier (Me-625) 1

8 Op-Amplifier As Schmitt Trigger(Me-633) 1

9 Op-Amplifier(V-I) & (I-V) (Me-640) 1

10 Vco (Ne-669) 1

11 Study Of Active Filter (Me-984) 2

12 Opamp Trainer Kit(Me-1151) 2

SOFTWARE TOOLS FOR RESEARCH WORK

1. MULTISIM For Design Automation Lab

2. Matlab Software For DSP Lab

CD Package

3. XilliK System FOR Verilog Digital Design Lab

Page 50: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

MICROPROCESSOR LAB

SR.NO NAME OF ITEMS QUANTIT

Y

1 8085 Microprocesser Kit 10

2 8086 Microprocesseer Kit 2

3 7 Segment Display Card 1

4 Stepper Motor 1

5 Keyboard 10

6 Stepper Motor Controller Card 1

7 ADC CARD 1

8 DAC CARD 1

ELECTRICAL ENGINEERING

ELECTRICAL TECHNOLOGY LAB

SR. NO. DESCRIPTION OF ITEMS QTY.

1 Verification Of Kcl & Kvl 2

2 Verification Of Norton's & Thevinin's Theorem 2

3 Verification Of Superposition Theorem 2

4 LCR Resonance Apparatus 2

5 Measurement Efficiency Of Single Phase 1

Transformer (Direct Loading)

6 Variac 8 Amps Single Phase 1

7 Loading Rheostat 2 Kw Single Phase In 8 Steps Of 250 1

Watt Each

8 Transformer 1kva/230/230vac With Tappings At 50% & 1

86.6%

9 Parameters And Losses In A Single Phase 1

10 Transformer By Oc And Sc Test.

11 Accessories:

12 Variac 8 Amps Single Phase 1

13 Transformer 1kva/230/230vac With Tappings At 50% & 1

86.6%

14 Speed Control Of Dc Shunt Motor (By Armature And 1

Field Current Control Method

15 Accessories:

16 Dc Shunt Motor 1 Hp 1

17 Tachometer 2 In 1 1

18 Rheostat 300ohms/2amps 1

19 Rheostat 100ohms/5amps 1

20 Measurement Of Power In 3 Phase Circuit By Two 1

Wattmeter Method

21 Accessories:

22 Variac 10 Amps Three Phase 1

23 Loading Rheostat 3kw Three Phase(Each Phase Of 1 1

Kw) In 8 Steps

Page 51: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

ELECTRICAL MACHINES LAB

SR. NO. NAME OF ITEM QTY.

Direct Load Test Kit

Accessories-T/R Of 1kva, Varac

1. 8a,270v, Load(Lamp)4kw,20a 01 01

SUMPNER‟S BACK TO BACK TEST KIT

01

03

2. ACCESSORIES-T/R OF 1KVA,

01

VARAC 8A,270V

Parellel Operation Of Transformer Kit 01

Accessories-T/R Of 1kva, Varac 01

3. 8a,270v, 01

Load 2kw 01

Dc Generator Magnetising Characteristics 01

4. Kit

Accessories-Generator Set

Dc Motor Speed Control Kit 01

Accessories-Dc Machine,

5.

01

Rehostat 100Ω,5a

01

300Ω,2a

O.C & S.C Tests Of Induction Machine Kit 01

Accessories-1-Phase Induction

6.

01

Motor,75kw,240v

01

Variac-10a

Block Rotor Test Of Induction Motor Kit

7.

Accessories-Induction Motor,3-Phase,1 01

Kw,440v,

01

Variac-10a

Scott Conection Of Transformer Kit 02

8. Accessories-T/R Of 1kva, Varac

01

10a,440v

Starting & Running Of Induction Machine Kit

9.

Accessories-3-Phase Induction Motor 01

ELECTRIC DRIVE LAB:

SR. NO. DESCRIPTION OF ITEMS QTY.

1 Three Phase Fully Controlled Rectifier Fed Separately Excited Dc Motor 1

(1hp) At Different Firing Angle For Obtaining Speed Torque Characteristics.

2 Single Phase Half Controlled Rectifier Fed Dc Series Motor (1hp) At 1

Different Firing Angle For Obtaining Speed Torque Characteristics.

3 Chopper Controlled Of Dc Series Motor (1hp) For Obtaining Torque 1

Characteristics.

4 Chopper Controlled Of Dc Series Motor (1hp) For Obtaining Speed- 1

Torque Characteristics.

5 Regenerative Braking Of Dc Shunt Motor. 1

6 Microcontroller Based Speed Control Of Dc Shunt Motor. 1

Page 52: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

POWER SYSTEM LAB:

SR. NO. DESCRIPTION OF ITEMS QTY.

1 T/R Oil Testing Kit 1

2 Panel To Find Abcd Parameters Of Transmission Line 1

3 Panel To Ferranti Effect Of Transmission Line. 1

4 Panel To Measure Sequence Voltage By Segregating N/W. 1

5 Panel To Study Differential Relay Along With 2 Rheostat. 1

6 Calibration Of Single Phase Induction Motor With 1 Lamp Load 1 Stop Watch 1 Wattmeter 1

7 Panel To Study Idmt Overcurrent Relay 1

8 Panel To Study Testing Of Ct Along With Ct Injection Set 1

9 Parallel Operation Of Two Alternators. 1

CONTROL SYSTEM LAB:

SR. NO. DESCRIPTION OF ITEMS QTY.

1 Experiment To Study D.C Motor Speed Control. 1

2 Experiment To Study Light Intensity Control Using P & Pi Controller 1 With Provision For And Transient Speed Control

3 Experiment To Study The Stepper Motor Characteristics And Its Control 1 Through Microprocessor Kit.

4 Experiment To Study Linear System Simulator. 1

5 Experiment To Study Ac Position Control System. 1

6 Experiment To Study Dc Position Control System. 1

7 Experiment To Study Temperature Control System. 1

8 Experiment To Study Compensation Design 1

9 Experiment To Study Synchros 1

10 Experiment To Study Potential Metric Error Detector. 1

Page 53: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

POWER ELECTRONICS LAB:

SR. NO. DESCRIPTION OF ITEMS QTY.

1 Experiment To Study Characteristics Of Diode, Thyristor And Triac. 1

2 Experiment To Study Characteristics Of Transistor And Mosfet. 1

3 Experiment To Study R And R-C Firing Circuits 1

4 Experiment To Study Ujt Firing Circuit. 1

5 Experiment To Study Complementary Voltage Commutation Using A 1 Lamp Flasher.

6 Experiment To Study Thyristorised D.C Circuit Breaker. 1

7 Experiment To Study Thyristorised A.C Phase Control. 1

8 Experiment To Study Full Wave Converter. 1

9 Experiment To Study Series Inverter. 1

10 Experiment To Study Dc Chopper. 1

11 Experiment To Study Of Bridge Inverter. 1

12 Experiment To Study Of Single Phase Cycloconvertor. 1

HUMANITIES AND APPLIED SCIENCES

PHYSICS LAB

Sr No. Particulars Qty.

1 Frequency of AC mains by Sonometer ME 867 2

2 Conversion Of Galvanometer into Volmeter And Ammeter ME 567 D 2

3 Carry Foster Slide Wire Bridge ME 2210 2

4 Focal length of given convex lens 1

5 Galvanometer 30-0-30 Division Senstivity of2UA/Divison ME 472 7

6 Battery Eliminator 212V DC / 3 AMP ME 413 1

7 Tapping Key ( Mars ) 1

8 Charts Dbios Applied Physics 3

9 Desauty Bridge 2

10 Fixed Frequency Sine Wave Oscillator ME 252 1

11 Senstive Head Phone ME 2219 1

12 Decade Capacitiance Box Two Dial Of ( any one dial ) ME 312 1

13 Mercury 100gm

14 Resistance 10 OHM 2W 10

15 High Resistance By Leakage Method ME 862 1

16 Measurement Of High Resistance Using Substitution Method ME 821 2

17 Resolving Power Of A Telescope 2

Page 54: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

1 18 Specific Rotation Of Cane Sugar Sol.With The Help Of Polarimeter ( Spirit Level )

19 Polarimeter Tube 2

20 Spirit level

21 Determine The Wavelength Of Sodium Lamp By Newton's Ring Method ME 858 2

22 Glass plate 1

23 Spherometer 1

24 Determine The Wavelength Of Sodium Light By Fresnels By Biprism KIT ME 852 1

25 Plane transmission Grating 1

26 Grating Stand 1

27 Decade Capacitiance Box's Two Dials Model # Me 855A With Spectrometter 6 Dia,

Diffrection Grating , Mercury Lamp, Reading Lens 1

28 To Find The Wavelenght Of Sodium Light By Micheison Interferometer 1

29 Digital Stop Watch 2

30 Edison cell for theromocouple 2

31 Digital Multimeter WACO 38 1

32 C.R.O. 20Mhz " Scientech " model 201C 1

33 Frequency of ultra sonic wave by piezo electric Digital R.F Oscillator

spectrometer, glass tank, piezoelectric crystal, Xylene 1

34 To determine e/m by long solenoid ( Helical ) Complete 1

35 To Find ionization potential of mercury using thyratron tube 2

36 To study the variation of magnetic field with distance & to find the radius of

coil by stewart & gee's app. With reversing key, rheostat, ammeter,

battery eliminator 1

37 To study char. Of cu-constantan Thermocouple Complete with heater, 1

funnel, copper pot , stand for thermocouple, 4 wire potentiometer & Galvanometer,

Resistance Box for above

38 Planck's Constant with dual power supply fitted with very sensitive microammeter, 2

photocell & Five Colour Fillters

39 Hall Effect App. Complete with Electromagnet, Digital power supply, Hall Probe, 1

Hall Effect set up, Digital gaussmeter

40 Hall Probe 2

41 To study V-I Char. Of P- N Junction diode Char. 2

42 To Measure the resistivity of the semoconductor material 1

using four probe method complete

43 B- H Curve app. Complete without C.R.O 1

44 Flashing & Quenching potential of argon to find unknown capacitance of unknown 2

capacitor with unknown capacitor

45 To Find temp. Coefficient of resistance by using platnium

resistance thermometer post office box,

platinum resistance thermometer, galvanometer with stand MO65, 1

46 Copper pot heater, Thermometer, One way key

Page 55: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

CHEMISTRY LAB

Sr. Product Name Packing Qty.

No.

1. Stop Watch (Electric) 2

2. Conductometer With Conductivity Cell (Systronic or 1

Microsil)

3. Water Bath Electrical With Six hole 2

4. Hot Plate 10"inches 1

5. Hot Air Oven 1

6. Electronic Balance 1

7. Redwood Viscometer RW1 1

8. Redwood Viscometer RW2 1

9. Pensky Marten Flash Point Apparatus 1

10. Visible Spectrophotometer with Cuvette 1

11. Water Distillation Still (Steel) 3 Lt./Hr. 1

12. Air Condensor With Flat Bottom Flask 10

Page 56: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

COMPUTER SCIENCE & ENGINEERING

Hardware

Server IBM System X3400 01

Intel Quad Core 5410, 2.33 GHz

4GB RAM, 146GB HDD, DVD-RW

17” TFT, Redundant Power Supp.

Server IBM Server X3200/ Pentium E 2160 DC 01

Processor, 1.8 GHz,1 MB Cache,

800 MHZ FSB, 1GB RAM, 250GB SATA HDD

CD ROM.

Server IBM Server X3100/ Pentium E 2140 DC 01

Processor, 1.6 GHz, 1 MB Cache,

800 MHZ FSB, 512GB RAM, 250GB SATA HDD

DVD ROM.

Server IBM Server X3200 M2/ Xeon E 3110 DC 01

Processor, 3.0 GHz,6 MB Cache,

1333 MHZ FSB, 2GB RAM,250GB*2 SATA HDD

DVD ROM, Server Raid MR10i

Server IBM Server X3650 ,12GB RAM,146GB*5 SAS 01

HDD,DVD ROM, Server Raid 5

Total 05

Computer Compaq 2044 62

Compaq 2070IL 01

Configuration P4(3.2GHz),256DDR RAM,80GB HDD

Combo Drive, 56Kbps Modem, 17” Color

Monitor, Optical Mouse, Key Board

Computer Dell Optiplex 330 n 75

Configuration Dual-Core (1.80), 1GBDDR2 RAM,

80GB HDD, 17” Wide Screen LCD

Monitor, Optical Mouse, Key Board

Computer Dell Optiplex 330 n 15

Configuration Dual-Core (1.80), 1GBDDR2 RAM,

80GB HDD, 17” Wide Screen LCD

Monitor, DVD Combo, Optical Mouse,

Key Board

Computer Dell Optiplex 360 85

Configuration Core 2 Duo, 2 GB RAM, 160 GB SATA

HDD, USB KEYBOARD & OPTICAL MOUSE.

18.5” Wide TFT Monitor. Core 2 Duo

Computer Dell Optiplex 360 65

Configuration Dual core, 2 GB RAM, 160 GB SATA HDD, USB KEYBOARD & OPTICAL MOUSE. TFT Monitor.

Page 57: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

Computer Dell Optiplex 380 115

Configuration Core 2 Duo, 2 GB RAM, 320GB HDD,

USB Keyboard, Optical Mouse, TFT

Total Computers 418

Laptop HP 01

Compaq 01

Router Cisco 1841 01

Printers 19

Online UPS 09

LCD Projector 05

Software

Borland TC++ Suite 4.5 for windows Oracle 10g/11g Std One Edition for Windows/Linux

Special purpose facilities available

o All the Labs are fully air-conditioned. Instructional area in each lab is

segregated. Building is centrally Air-conditioned. o Institute has internet bandwidth of 48 Mbps provided though fibre optic cable.

List of facilities available

o Cafeteria, hostel facilities (girls and boys separately), internet and library facility available after working hours, conference hall equipped with LCD Projector, play

ground. Elevators, Bus facility, Campus wide networking (Wi-Fi system), metal

roads, lush green parks, STD & photocopy facility.

Games and Sports Facilities

o The Institute provides adequate infrastructure for games and students are encouraged

to participate in various sports activities. Badminton, Football, Volleyball, Basket ball

and Gymnasium Hall facilities are also available in the campus.

Extra Curriculum Activities

Extracurricular activities are provided to the students for over-all development of

their personality. Student’s activity clubs are created.

Soft Skill Development Facilities

o The Institute provides Soft skill development facility to the students by way of

group discussions & seminars with the help of audio-visual aids to help the students to

refine and improve their communication skills. Communication Lab has been also setup.

Page 58: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

No. of Classrooms and size of each

o No. of Lecture halls: 26 Capacity for each: 70 students

No. of Tutorial rooms and size of each

o No. of Tutorial rooms: 10 Capacity of each: 30 students

No. of laboratories and size of each

o No. of Laboratories: 38 Size: 175-200 sqm Capacity of each: 30

No. of drawing halls and size of each

o No.: 02 Size: 214sqm Seating capacity = 120

No. of Computer Centers with capacity of each

o No.: 02 Capacity: 60 computers. Seating capacity = 60

Central Examination Facility, Number of rooms and capacity of each

o No. of rooms: 18 Seating Capacity: 50

Curriculum and syllabi for each of the programmes

o The syllabi and schemes of examination as prescribed by Kurukshetra University,

to which this Institute is affiliated, are being followed.

Academic Calendar of the University

o Academic Calendar of Kurukshetra University, Kurukshetra is followed.

Academic Time Table

o Notified to the students from time to time.

Teaching Load of each Faculty

Professor 10-12 hrs./week Associate Professor 12-15hrs./week

Asstt. Professor 16-18hrs./week

Internal Continuous Evaluation System and place:

o The evaluation of the sessionals (Internal Assessment) will be made by the

concerned teachers as per the guidelines of Kurukshetra University, Kurukshetra. Accordingly weightage shall be as under:

Class Test 40%

Attendance 40%

Class work 20%

Students' assessment of Faculty, System in place

o Feedback from the students, to appraise the teaching efficiency of the individual

teachers is taken. The university result is also a parameter to judge the teacher’s

performance.

Page 59: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here]

MANDATORY DISCLOSURE

For each Post Graduate programme give the following:

1. Title of the programme M.TECH. (Electronics & Communication Engg.)

2. Curriculum and Syllabi As prescribed by Kurukshetra University, Kurukshetra is being followed

Laboratory facilities exclusive to the PG programme Digital communication LAB Performed on hardware and toolbox MATLAB. DSP LAB having 23 pc with installed Toolbox MATLAB

1. Title of the programme M.TECH. (Computer Science & Engg.)

2. Curriculum and Syllabi As prescribed by Kurukshetra University, Kurukshetra is being followed

Laboratory facilities exclusive to the PG programme ADA & AWT LABS Performed on software SCILAB Research Laboratory

1. Title of the programme 2 Year MBA Programme

2. Curriculum and Syllabi As prescribed by Kurukshetra University, Kurukshetra

is being followed

Page 60: KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENTkitm.edu.in/kitmadmin/album/upload/1542357281502Mandatory_Disclosure... · Qualifications with class / grade UG B.E. in Mech. Engg

[Type here] MANDATORY DISCLOSURE

KURUKSHETRA INSTITUTE OF TECHNOLOGY & MANAGEMENT

PEHOWA ROAD, KURUKSHETRA