Reverse Osmosis

Nanofiltration

Quality Water. Compact Total Package.

MegaMagnum®

Water Treatment Systems

MegaMagnum® System

2:1 Vessel Array

Cartridge Filter

C T P

HighPressure Pump

FeedConcentrate

Product

P

P C

P

dP

VFD

dP

C

F

F

F

Redefining Water Treatment

These systems from Koch Membrane Systems (KMS) are standard

designs that use reverse osmosis (RO) and nanofiltration (NF) tech-

nology for optimum water treatment within a compact, skid-mounted

package. At the core of each system is the latest innovation from

KMS, the world’s largest spiral wound element. The MegaMagnum®

element has an unprecedented 18-inch diameter and 61-inch length.

Because of this unique design, MegaMagnum systems significantly

reduce the cost of producing high quality water through:

• Pre-engineered packaged systems for fast installation and start up

• Reduced system footprint to minimize building costs

• Fewer connections and seals for greater reliability

Driving the Process:Reverse Osmosis and Nanofiltration

RO and NF are pressure-driven technologies for purifying

water using membranes. Typical feed pressures range from

100 to 300 psi (7 to 21 bar). RO membranes remove almost

all particles including salts and organic molecules. NF

membranes selectively remove particles and are often used

to remove hardness, sulfate, and organics. In both technologies

pressurized water is forced through the membranes, providing

high quality water as product, and leaving salts and organics

behind in a concentrate stream.

MegaMagnum®

elements use advanced

FLUID SYSTEMS® TFC®

RO and NF membranes

Applications

Brackish water

desalination

Removal of inorganic

contaminants such

as nitrates, arsenic

and radium

Softening

Organics removal

Water reuse

Production of high-quality

process water

Industrial wastewater

recycling

C conductivityF flowT temperatureP pressuredP differential pressure

VFD variable frequency drive

Optional Equipment

Raw water feed pump

Interstage boost pump

Antiscalant dosing system

Acid dosing system with pH control

ASME code stamp for pressure vessels

Seismic zone 4 construction

Standard Equipment

ANSI centrifugal high pressure feed pump

Cartridge filter housings with on-line sparecapacity

MegaMagnum® elements with FLUIDSYSTEMS® TFC® membranes

18-inch FRP pressure vessels with300 psi ASME design

Flow meters (magnetic on permeate andconcentrate, paddle wheel on feed)

Pressure transmitters (1st and 2nd stagedifferential and feed pressure)

Conductivity meters (feed, concentrateand permeate)

Variable Frequency Drive (VFD) mountedin NEMA 12 enclosure

NEMA 4 control panel

Programmable Logic Controller (PLC)

Human Machine Interface (HMI) withcolor touch screen, data trending andEthernet access

PVC Schedule 80 low pressure piping

304L Schedule 10 high pressure piping

Carbon steel support frames withthree-coat epoxy paint

Cleaning skid for single pressure vessel

Electropolished 316L SS piping and prefiltersfor extra corrosion protection

304 SS frame

Air conditioned NEMA 4 enclosure for VFD

Clean-in-place (CIP) system

MM9 and MM12 systems

are supplied on two skids

for containerized

shipping.

MM3 and MM6 systems

are mounted on a

single skid.

MM9L 35’W 15’ 4”H 9’ 11”

MM12L 35’W 16’ 5”H 11’ 11”

MM3L 30’ 6”W 7’ 7”H 7’ 5”

MM6L 30’ 6”W 10’H 7’ 5”

Capacities

System Nominal FlowName Array MGD m3/day

MM3 2-1 0.5 1,900

MM6 4-2 1 3,800

MM9 6-3 1.5 5,700

MM12 8-4 2 7,600

The KMS Difference:

KMS ASSIST® Service and Maintenance

When you buy a MegaMagnum system from KMS, you get much

more than water treatment equipment. Behind every KMS design is

a company that has more than 30 years of experience in membranes

and membrane system manufacturing. KMS has a dedicated team

of process engineers and service professionals to provide technical

assistance during installation and startup.

For on-going technical support long after installation is complete,

the KMS ASSIST® Service and Maintenance Program provides various

levels of assistance. Depending upon your requirements, you can opt

for the total package, or customize your plan and choose only individual

elements as needed. To make it easier for you to enhance membrane

performance and prolong membrane life KMS also offers RO and

NF antiscalants and membrane cleaners that comply with NSF/ANSI

Standard 60.

Whatever your application KMS can provide all the products, parts,

servicing and maintenance expertise you’ll ever need for outstanding

water treatment now and into the future.

©2005, 2007, 2008 Koch Membrane Systems, Inc.The FLOW LINES DESIGN, MegaMagnum, FLUID SYSTEMS,TFC and KMS ASSIST are registered trademarksof Koch Membrane Systems, Inc. The STYLIZED Kis a registered trademark of Koch Industries, Inc.in the USA and other countries.All rights reserved worldwide. 09/08 051.

Koch Membrane Systems, Inc. is a Koch ChemicalTechnology Group, LLC company.

Corporate HeadquartersKoch Membrane Systems, Inc.

850 Main Street

Wilmington, Massachusetts 01887-3388

USA

Main: +1-978-694-7000

Toll Free: +1-888-677-5624

Fax: +1-978-657-5208

Manufacturing FacilitiesWilmington, Massachusetts

San Diego, California

Aachen, Germany

International ContactsEurope/ Middle East/Africa

Koch Chemical Technology Group, Ltd.

Koch Membrane Systems Division

Units 3-6, First Floor

Greyfriars Business Park, Frank Foley Way

Stafford ST16 2ST

United Kingdom

Tel: +44-178-527-2500

Fax: +44-178-522-3149

Aachen, Germany

Lyon, France

Madrid, Spain

Manama, Kingdom of Bahrain

Milan, Italy

Stafford, United Kingdom

Wijnegem, Belgium

Asia/Pacific

Beijing, China

Chennai, India

Melbourne, Australia

Mumbai, India

Shanghai, China

Singapore

Sydney, Australia

Latin America

Sao Paulo, Brazil

www.kochmembrane.com