kmd-530m h kmd-530mh · kmd-530m_h 04/11/17 item # 13350 air-cooled air-cooled model shown bottom...

2
MODULAR CRESCENT CUBER KMD-530M_H 04/11/17 Item0 # 13350 Item #: Project: Qty: AIA#: 618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com © HOSHIZAKI AMERICA, INC. * approximate size in inches, image not to scale Features Up to 560 lbs. of ice production per 24 hours Ice on beverage design Durable stainless steel exterior Protected by H-Guard Plus Antimicrobial Agent EverCheck TM alert system Removable air filters (Air-cooled model only) Front air inlet panels available for side-by-side application (used with HS-5065) R-404A Refrigerant Air-Cooled Shown on optional Lancer 30” Dispenser KMD-530MAH Individual crescent cube Stainless steel evaporator CycleSaver TM design TM TM Available on Bins: B-1150SS B-1300SS Ambient Temp Range 45 - 100°F Water Temp Range 45 - 90°F Water Pressure 10 - 113 PSIG Voltage Range 104 - 127V Operating Limits Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent Water-Cooled Model (Lines Must Be Independent of Icemaker) Condenser Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent Plumbing Panels easily removed and all components accessible for service. For proper air circulation and ease of maintenance/service, allow 6” (15 cm) clearance at rear, sides, and top for air, water, and remote models. Allow 12” (30 cm) clearance at right side for air-cooled models. Service 30" x 24 1/4 " x 22 1/8 " W x D x H Hoshizaki reserves the right to change specifications without notice. ® B-250PF B-500PF/SF Top kit may be required. See Bin Spec Sheets. Printed in the U.S.A. Water-Cooled KMD-530MWH Remote Air-Cooled KMD-530MRH Air / Water Temp Lbs. per 24 hours Condenser Model 70°/ 50°F 90°/ 70°F ICE PRODUCTION Per Cycle Lbs. Cubes Potable Gal. per 100 lbs. Condenser Gal. per 100 lbs. Max. Fuse Size or HACR Circuit Breaker Heat Rejection BTU/hr. Shipping Weight Voltage ENERGY STAR ® WATER USAGE 90°/ 70°F 90°/ 70°F ELECTRICAL 90°/ 70°F kWh Used per 100 lbs. Amperage 553 540 560 KMD-530MAH KMD-530MWH KMD-530MRH Water-Cooled 462 520 488 9.3 10 9.6 432 432 432 5.7 4.4 5.8 17.1 20.9 16.5 N/A 102 N/A 20A 20A 20A Remote Air-Cooled 6,800 7,080 7,800 170 lbs. 170 lbs. 170 lbs. 115/60/1 115/60/1 115/60/1 Air-Cooled 12A 10.5A 12A 3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries. Warranty: B-800PF/SF B-900PF/SF BD-500PF/SF B-700PF/SF KMEdge SERIES KMD-530M_H 1 1/21/2 1 1/8KM Edge Cube Dimensions*

Upload: others

Post on 22-May-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: KMD-530M H KMD-530MH · KMD-530M_H 04/11/17 Item # 13350 AIR-COOLED AIR-COOLED Model Shown Bottom dimensions are common for all KMD-530 Models AIR-COOLED AIR-COOLED For Use with KMD-530MRH

MODULAR CRESCENT CUBER

KMD-530M_H04/11/17

Item0 # 13350

Item #:

Project:

Qty:

AIA#:

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

* approximate size in inches, image not to scale

Features

• Up to 560 lbs. of ice production per 24 hours

• Ice on beverage design

• Durable stainless steel exterior

• Protected by H-Guard Plus Antimicrobial Agent

• EverCheckTM alert system

• Removable air filters (Air-cooled model only)

• Front air inlet panels available for side-by-side application (used with HS-5065)

• R-404A Refrigerant

Air-CooledShown on optional

Lancer 30” Dispenser

KMD-530MAH

Individual crescent cube

Stainless steel evaporator

CycleSaverTM design TM

TM

Available on Bins:B-1150SSB-1300SS

• Ambient Temp Range 45 - 100°F• Water Temp Range 45 - 90°F• Water Pressure 10 - 113 PSIG• Voltage Range 104 - 127V

Operating Limits• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or EquivalentWater-Cooled Model (Lines Must Be Independent of Icemaker)• Condenser Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent

Plumbing

• Panels easily removed and all components accessible for service.• For proper air circulation and ease of maintenance/service, allow 6” (15 cm) clearance at rear, sides, and top for air, water, and remote models. Allow 12” (30 cm) clearance at right side for air-cooled models.

Service

30" x 241/4" x 221/8"W x D x H

Hoshizaki reserves the right to change specifications without notice.

®

B-250PFB-500PF/SFTop kit may be required. See Bin Spec Sheets.

Printed in the U.S.A.

Water-CooledKMD-530MWH

Remote Air-CooledKMD-530MRH

Air / Water TempLbs. per 24 hoursCondenser Model

70°/ 50°F 90°/ 70°F

ICE PRODUCTIONPer Cycle

Lbs. Cubes

Potable Gal. per 100 lbs.

Condenser Gal. per 100 lbs.

Max. Fuse Sizeor HACR

Circuit Breaker

HeatRejectionBTU/hr.

ShippingWeightVoltage

ENERGYSTAR®

WATER USAGE

90°/ 70°F 90°/ 70°F

ELECTRICAL

90°/ 70°F

kWh Used per 100 lbs. Amperage

553

540

560

KMD-530MAH

KMD-530MWH

KMD-530MRH

Water-Cooled

462

520

488

9.3

10

9.6

432

432

432

5.7

4.4

5.8

17.1

20.9

16.5

N/A

102

N/A

20A

20A

20ARemote Air-Cooled

6,800

7,080

7,800

170 lbs.

170 lbs.

170 lbs.

115/60/1

115/60/1

115/60/1

Air-Cooled 12A

10.5A

12A

3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries.

Warranty:

B-800PF/SFB-900PF/SF

BD-500PF/SFB-700PF/SF

KMEdgeSERIES

KMD-530M_H

11/2”1/2”

11/8”KM Edge Cube Dimensions*

Page 2: KMD-530M H KMD-530MH · KMD-530M_H 04/11/17 Item # 13350 AIR-COOLED AIR-COOLED Model Shown Bottom dimensions are common for all KMD-530 Models AIR-COOLED AIR-COOLED For Use with KMD-530MRH

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

WATER-COOLED REMOTE AIR-COOLED

REMOTE AIR-COOLED

BOTT

OM V

IEW

REAR

VIE

WSI

DE V

IEW

FRON

T VI

EW

WATER-COOLED

REMOTE AIR-COOLEDWATER-COOLED

Printed in the U.S.A.

MODULAR CRESCENT CUBER

KMD-530M_H04/11/17

Item # 13350

AIR-COOLED

AIR-COOLED Model ShownBottom dimensions are common for all KMD-530 Models

AIR-COOLED

AIR-COOLED

For Use with KMD-530MRHURC-5F Remote Condenser (Sold Separately)

Voltage supply for the URC Remote Condenser is suppliedfrom the Ice Maker. No additional circuit is required.

Air Flow

URC-5F

2 1/2

1 3/4

Liquid Refrigerant Line

Discharge Line

ElectricalConduitAccess

3

Pre-Charged Tubing Kits(Sold Separately)20' R404-2046-235' R404-3546-2

Front Front Front

Front21 21/32 17 1/8

18

32 13/16

16 7/10 21 21/32

3/8

1/4

KMD-530M_H