kmd-410m j kmd-410mj

2
MODULAR CRESCENT CUBER KMD-410M_J 06/05/19 Item # 13547 Item #: Project: Qty: AIA#: 618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com © HOSHIZAKI AMERICA, INC. Up to 449 lbs. of ice production per 24 hours Durable stainless steel exterior EverCheck TM alert system Removable air filters (air-cooled model only) Designed specifically for use on ice and beverage dispener (pictured with a Lancer 22” model) R-404A Refrigerant TM Ambient Temp Range 45 - 100°F Water Temp Range 45 - 90°F Water Pressure 10 - 113 PSIG Voltage Range 104-127V Operating Limits Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent Water-Cooled Model (Lines Must Be Independent of Icemaker) Condenser Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent Plumbing Service 22 1/4 " x 24 1/8 " x 24" W x D x H Hoshizaki reserves the right to change specifications without notice. Air-Cooled Shown on optional Lancer 22” dispenser KMD-410MAJ Also available on Bins: B-250PF BD-300PF/SF Top kit is required. See Bin Spec Sheets. 3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries. Warranty: Water-Cooled KMD-410MWJ B-500PF/SF B-700PF/SF DB-130H Panels easily removed and all components accessible for service. For proper air circulation and ease of maintenance/service, allow 6” (15 cm) clearance at rear, left side, and top and 12” (30 cm) clearance at right side for both air-cooled and water-cooled models. 418 449 KMD-410MAJ KMD-410MWJ Air 351 436 23.7 22.9 N/A 108 5.7 4.1 20A 20A Water 5,500 6,300 126 / 161 128 / 163 115V/60/1 115V/60/1 Air / Water Temp Lbs. per 24 hours Condenser Model 70°/ 50°F 90°/ 70°F ICE PRODUCTION Potable Gal. per 100 lbs. Condenser Gal. per 100 lbs. Max. Fuse Sz or HACR Circuit Bkr Heat Rejection BTU/hr. Voltage WATER USAGE 90°/ 70°F 90°/ 70°F ELECTRICAL 90°/ 70°F kWh Used per 100 lbs. Amperage 8.2A 6.6A Circuit Wires (including ground) 3 3 Net / Ship Weight (lbs.) Refrigerant Charge Amount 1 lb. 0.9 oz. 14.1 oz. KMD-410M_J Features Individual crescent cube Stainless steel evaporator CycleSaver TM design TM Volume: 33 3/4 ” x 33 1/4 ” X 27 5/8 17.94ft 3 Shipping: (LxWxH) Power cord not included * approximate size in inches, image not to scale KM Edge Cube Dimensions * 1 1/21/2 1 1/8Please refer to water filter spec sheet for recommended configurations. Water Filter B-800PF/SF B-900PF/SF

Upload: others

Post on 22-May-2022

11 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: KMD-410M J KMD-410MJ

MODULAR CRESCENT CUBER

KMD-410M_J06/05/19

Item # 13547

Item #:

Project:

Qty:

AIA#:

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

• Up to 449 lbs. of ice production per 24 hours

• Durable stainless steel exterior

• EverCheckTM alert system

• Removable air filters (air-cooled model only)

• Designed specifically for use on ice and beverage dispener (pictured with a Lancer 22” model)

• R-404A Refrigerant

TM

• Ambient Temp Range 45 - 100°F• Water Temp Range 45 - 90°F• Water Pressure 10 - 113 PSIG• Voltage Range 104-127V

Operating Limits• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or EquivalentWater-Cooled Model (Lines Must Be Independent of Icemaker)• Condenser Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent

Plumbing

Service

221/4" x 241/8" x 24"W x D x H

Hoshizaki reserves the right to change specifications without notice.

Air-CooledShown on optional

Lancer 22” dispenser

KMD-410MAJ

Also available on Bins:B-250PFBD-300PF/SFTop kit is required. See Bin Spec Sheets.

3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factoryfor warranty in other countries.

Warranty:

Water-CooledKMD-410MWJ

B-500PF/SFB-700PF/SF

DB-130H

• Panels easily removed and all components accessible for service.• For proper air circulation and ease of maintenance/service, allow 6” (15 cm) clearance at rear, left side, and top and 12” (30 cm) clearance at right side for both air-cooled and water-cooled models.

418

449

KMD-410MAJ

KMD-410MWJ

Air 351

436

23.7

22.9

N/A

108

5.7

4.1

20A

20AWater

5,500

6,300

126 / 161

128 / 163

115V/60/1

115V/60/1

Air / Water TempLbs. per 24 hoursCondenser Model

70°/ 50°F 90°/ 70°F

ICE PRODUCTIONPotable

Gal. per 100 lbs.Condenser

Gal. per 100 lbs.Max. Fuse Sz

or HACRCircuit Bkr

HeatRejectionBTU/hr.

Voltage

WATER USAGE

90°/ 70°F 90°/ 70°F

ELECTRICAL

90°/ 70°F

kWh Used per 100 lbs. Amperage

8.2A

6.6A

CircuitWires

(including ground)

3

3

Net / ShipWeight (lbs.)

Refrigerant Charge Amount

1 lb. 0.9 oz.

14.1 oz.

KMD-410M_J

Features Individual crescent cube

Stainless steel evaporator

CycleSaverTM design TM

Volume:333/4” x 331/4” X 275/8” 17.94ft3Shipping: (LxWxH)

Power cord not included

* approximate size in inches, image not to scale

KM Edge Cube Dimensions*

11/2”1/2”

11/8”

Please refer to water filter spec sheet for recommended configurations.Water Filter

B-800PF/SFB-900PF/SF

Page 2: KMD-410M J KMD-410MJ

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

WATER-COOLED

BOTT

OM V

IEW

WATER-COOLED

BACK

VIE

WSI

DE V

IEW

FRON

T VI

EW

WATER-COOLED

AIR-COOLED

AIR-COOLED

AIR-COOLED

Front Front

WATER-COOLEDAIR-COOLED

Front Front

MODULAR CRESCENT CUBER

KMD-410M_J06/05/19

Item # 13547KMD-410M_J