kleur bladsye voor - processplant.co.za · standard anti-seize anti-roll back who are we: davtech...
TRANSCRIPT
We take this opportunity of introducing ourselves to you as stockiest and suppliers of the following products:
Conveyor Systems –
Shaft less
Screw Systems, Live Bottom Systems, Vertical Systems, Dewatering Presses, Grit
Classifiers
Glider Belt Trackers –
Impact Beds, Trampoline Impact beds, Glider Through, Glider Return, Glider V Return.
ACM Bearings -
Bushes,
Wear Pads, Rollers, Spherical, Wear Rings, Wear Tape, Custom Components, Tube,
Sheet, Rod
Conveyor Idler Rollers –
For the Mining Industry and Bulk Material Handling
Alfagomma -
Mining
and Industrial Hoses, PVC Rubber Lay Flat, Ducting
Hydraulic & -
Hydraulic and pneumatic equipment and cylinder repairs
Pneumatics
Steam Traps -
Float, Inverted, Bucket, Thermostatic & Thermodynamic
Sight Glasses -
Double Sided Flanged & Screwed Sight Glass Combined Check Valves
Butterfly Valves -
Wafer Type & Flanged with Various Liners & Discs to suit Every Application
Ball, Gate and Globe
-
Cast Iron, Stainless Steel, Bronze Flanged and Screwed
Valves
Check Valves -
Cast Iron, Stainless Steel, Bronze Flanged in All Tables Screwed & Wafer
Diaphragm Valves -
A & KB Type Flanged & Screwed
Pinch Valves
Pressure Reducing -
For Liquid, Air & Gasses in All Materials Flanged and Screwed
Relief Valves
Control Valves -
For Steam, Oil, Gasses, Pneumatic & Electric Actuated
Solenoid Valves
Boiler Mountings -
Crown Valves, Safety Gauge, Glass Fittings, Boiler Joints, Packing’s & All Spares Including
Gauge Glass & Rubbers
Repairs to All Types of Valves with Test Certificates
Gauges -
Pressure & Temperature
Pipes & Pipe Fittings -
Mild Steel, Carbon Steel, Stainless Steel, Galvanized, Copper & Brass
Flanges -
Flanged, Screwed, Butt-weld, Copper & Brass
Assettagz –
Managing Your Assets
PROCESS PLANTe-mail: [email protected]
Cell: 082 885 9550
Anti-Roll Back Standard Anti-Seize
WHO ARE WE: Davtech is a dynamic company supplying a complete solution to the engineering sector. Davtech was established in 1992 by Dave Steyn who is an expert in the petrochemical and process related Industries. We supply state of the art bearings to the mining sector. In the last 5 years we have expanded our product range to include conveyor equipment and solutions. Over the past 2 years we have included high quality heat exchange products from HGF-PHE, who are leaders in the world in this technology ,to our product range. Recently we have secured the exciting new product for Asset Management known as Assettagz Our customers include Evarz Highveld Steel and Vanadium, Exxaro, Xstrata, Tshwane Metropolitan, Gauteng Provincial Government, Ford Motor Company, Nissan South Africa, The Lion Match, Nampak, National Brands, Tiger Brands, Coca Cola South Africa and Vanchem, to name but a few.
PROCESS PLANT
SPILLAGE CONTROL IMPACT BEDSSPILLAGE CONTROL IMPACT BEDS
The Shaftless Spirals are manufactured from the highest quality High Tensile Steel and can be used in extremely high torque applications up to 10 000 Nm. Spirals can also be manufactured in Stainless Steel AISA 302L and AISI 316L. Spirals can be rolled in both left and right hand configurations. For abrasive conditions Shaftless Spirals can be treated by means of hard facing, nitriding, ceramic lining and various other well recognized abrasion resistant treatments. Shaftless Spirals also offer an additional service whereby spirals can be GRP lined for extremely corrosive environments. Reinforced Spirals top handle long lengths and high torques are also available. Shaftless Spirals can offer design and turnkey solutions to all materials handling problems.
LIVE BOTTOM
SHAFTLESS SCREW CONVEYOR SYSTEM
- No hanger bearing or end bearings- Totally enclosed, therefore odourless and dustless- 100% capacity- Lower speeds, therefore less wear and tear- Maximum length: Up to 45m horizontally and 20m vertically- Lower energy consumption
- Manufactured in left hand - and right hand configurations ensuring optimum material flow- Veriable pitch optimizing material flow- Conveying of large capacities- Up to 300m per hour- No hanger bearings or end bearings- Any length or width
3
ACM High Load Low Friction Lubrication Free Bushes and Wear Linings. Ideally Suited for an Aggressive Dust and Dirt Environment. Davtech is an importer of this Specialized Product
Wear Rings Wear Pads Wear Bushes
ACM Structural Bearings
Used in the Greenwich Jetty @ Millennium Dome
ACM have developed a range of advanced composites materials. These are fibre reinforced plastic laminates
which are ideally suited to high load bearing applications in a variety of environments.
The material is available in tube and sheet form as well as in fully finished components such as structural bear-
ings, washers, wear rings, spherical bearings, wear pads, wear strips, rollers, and bushes. We can also manu-
facture custom components according to specification.
Advantages over Phosphor Bronze
ACM composite bearings offer engineers a real cost effective alternative to phosphor bronze and older traditional material used.
ACM materials have the ability to take high loads without compressing out, and are self lubricating so id servicing is neglected
our materials will continue to perform. The self-lubricating properties permit further value engineering by allowing the removal
of greasing systems.
ACM can also operate in dry, gritty environments, hence preventing the formation of grease or grit lapping past which can abrade shafts to destruction
Advantages over Nylon
Although nylon materials are sold under various trade names, they are limited to relatively lightly loaded situations.
ACM materials exhibit a far higher load capacity than nylons and are dimensionally stable in fluids. Absorption is less than 0.1% compared to nylon at up to 9%. This low level of absorption means that there is negligible swelling and degradation of proper-ties. It also means you can run with tighter running clearances which increase the available bearing area and excludes to a greater extent the ingress of foreign particles ( which in the case of nylon get embedded in and proceed to abrade the shaft).
ACM properties will remain stable no matter where in the world they are used, whereas those of nylon can be affected by the glass transition temperature.
Advantages over Phenolic Asbestos
For many years, Phenolic Asbestos laminates were the best materials available to engineers as a replacement for phosphor bronze. ACM materials have around 35% more compressive strength and are non-toxic, containing no asbestos.
Phenolic Asbestos absorbs around 2% fluids, so ACM has similar advantages over this as it does for nylon.
In addition, we are able to impregnate with solid lubricants, such as graphite, PTFE or MoS2
which is there for life of the compo-nent unlike oil impregnation.
Advantages over Hardened Steel
Our enhanced load grade material, L18, has been designed to exceed the limits of bronze and go into the load areas of hard-ened steel, with the benefits of savings on shaft materials and grease and reduced service costs.
Dav
e S
teyn
C
ell:
082
821
6136
E-m
ail:
dave
@da
vtec
h.co
.za
Fra
ncio
s C
lass
en
Cel
l: 08
2 90
0 95
50
E-m
ail:
fran
cios
@da
vtec
h.co
.za
Lore
tte K
raus
eC
ell:
082
885
9550
E-m
ail:
lore
tte@
davt
ech.
co.z
a
HGF-PHE Introduces some of the world’s most advanced replacement heat exchanger gaskets to all industries. HGF-PHE offers massive savings on high-quality gaskets, offering massive cost savings of up to 40% off gasket replacement. We are proud to represent this global leader in South Africa : HGF-PHE gaskets meet and exceed the levels of performance you expect from top-of-the line gaskets offered by manufacturers of plate heat exchangers. We offer a growing variety of gasket types. These are available in several materials to assure optimum performance in your spe-cific application. All gaskets are manufactured at our facility in Halmstad Sweden under strict QS 9000, ISO 14001 & ISO 9002 regulations.
HGF-PHE products are developed and produced to provide world-beating performance and reliability we guarantee it. We have a qualified crew available around the clock for on-site maintenance, we also boast in-house facilities for plate reconditioning and regasketting with speedy turn around times.
Largest Spares Range
DMS
DongWha
Fischer
Funke
GEA
Hisaka
Alfa-Laval
APV
Arsopi
Barriquand
Bell & Gossett
Cetetherm
DHP
Izumi
Krashin
Mueller
Otto Heat
Pasilac
Polaris
SEC
Schmidt
Sondex
SWEP
Tranter
Vicarb
HGF-PHE assists with spares and support for
HGF-PHE also offers a wide range of gasket and plate materials including:
Rubber Compounds :
NBR (Nitrile)
Viton®
Hypalon®
HNBR (Hydrogenated Nitrile)
Neoprene (CR)
EPDM
Butyl (RCB)
Metal Grades :
SS316
Titanium
Hastelloy®
Avesta
Nickel
Uranus B-6
Incoloy / Inconel
Monel
Tantalum
We are proud to be stockiest and suppliers of various high quality valves which include the following:
Throughout the industries worldwide, one name stands above all others for butterfly valve reliability and versatility -TOMOE. Products include High Performance Valves , Rotary Control Valve, Teflon Lined Valves, Rubber Sealed Valves and Actuators
In 1885 Leser developed its first safety valve for the protection of steam boilers . Products include High Performance, API Series, High Efficiency, Compact Performance, Clean Service, Critical Service, Modulate Action
Velan manufactures a world -leading range of cast and forged steel gate, globe, check, ball, triple-offset butterfly, knife gate, highly engineered severe service valves, and steam traps offering superior performance across all major industrial applications.
Mipel always stood out by the innovation, the quality and the high performance in the production of valves for different applications and sectors. Products include Ball, Globe, Wafer and Butterfly valves in Steel, Brass and Bronze.
Since its founding over a half century ago, TLV's goal has been to produce dependable, long-lasting steam traps. TLV products meet the needs of the industrial world for Longer service life , Greater energy savings , Improved quality , Increased productivity , Enhanced environ-mental conservation . TLV produce High Quality Steam Traps, Condensate Recovery, Pres-sure Reducing Valves, Ball Valves, Check Valves, Strainers and Sight Glasses.
WHAT WE DO
Know whatconditionyour assets
are in?
Have a live Fixed Asset
Register ?
Know the current location
of all your assets?
Knowif the
inspection is actually taking place?
Knowwhen
they need servicing/
inspecting?
Assign responsibilityfor managing and updating the records?
YOU CAN ........
Manage your assets using automated
work Orders ?
Manage spares and consumable
stock?
Know how safe your
assets are ?(OHS Act)
WHAT THIS WOULD MEAN TO YOU
Reduces manual data input
Eliminates data entry errors
Theft deterrent
Fewer lost assets
Reduce costs
Quicker asset deployment
Visibility of assets
Electronic documentation
Communication –set realistic expectations
Improve CustomerService
Control risk and compliance
Confirms attendance
Standardise processes
Adherence to Health andSafety Policies
Greater accountability
Improve Efficiency
Improves utilisation
Automated process – eliminates paper trail
Common view of assets
Eliminates paper -environmentally friendly
Sophisticated reporting tools
R
EFFICIENCY, SAFETY AND COST SAVINGS
MOBILE SOLUTION
Assettagz Complete Asset Management
Fixed Asset Register(FAR)
Consumable Stock
Inspection
Hire / Issue
10
LOCATION, STATUS AND CONDITION