kitronik april 2013 electro-fashion update
DESCRIPTION
New electro-fashion products and resources April 2013TRANSCRIPT
![Page 1: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/1.jpg)
NEW E-TEXTILE PRODUCTS
MAGNETIC SWITCH – EXAMPLE APPLICATION
The nose on this dog lights when the bone is put next to it (see pictures). To make this possible there is a magnet activated switch in the dog and a small magnet in the bone. The magnetic switch can be used with a number of LEDs so isn’t just limited to just the one nose LED in this project. The switch can be used in most textiles projects as it measures in at just 25 x 6 mm.
This special textiles update contains information on new Electro-Fashion products including:
We are also now having conductive thread made specially to our own requirements. This will mean we will always have it in stock and at a lower price.
£3.40
1+
£3.00
10+Code
2720
Description
Magnetic switch & magnet
APRIL UPDATE
ELECTRO-FASHIONMAGNETIC SWITCH & MAGNET
With this magnetic switch LEDs can be turned on when the magnet is placed near the switch.
4 BRAND NEWPRODUCTS INSIDE!
Dimensions: 25 x 6 mm
- A switch which is activated by a magnet.- A light sensing board that allows lights to turn on automatically when it is dark.- A pre-made cat design which is a perfect starting point for anyone new to using Electro-Fashion.
LED off Bone next to dog = LED on
![Page 2: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/2.jpg)
www.kitronik.co.uk/quicklinks/fashionresources/
USING THE ELECTRO-FASHION KITS
FREE TO DOWNLOAD RESOURCES
Twist the LED leg into a loop using pliers.
STEP 1
Make a secure connection to the cell holder.
STEP 2
Sew running stitches to the loop on the LED.
STEP 3
Sew the other side of the LED to the cell holder.
STEP 4
Slide the cell in to the holder.
STEP 5
The finished product.
STEP 6
To help people new to Electro-Fashion get started we have worked with Julie Boyd to develop some free
online resources. These give detailed step by step explanations of how to make a product.
There are guides on adding a LED to a hat (both a standard LED and a slim line LED), making a zippi doll
with light up eyes & adding three LEDs to a bag. We are always working on more resources so it’s worth
keeping an eye on the website.
![Page 3: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/3.jpg)
JULIE BOYD - EDUCATION CONSULTANT & E-TEXTILES SPECIALIST
ARE YOU A TEXTILES TEACHER?
Want help to integrate e-textiles your classroom?
Looking for teaching and learning resources on e-textiles & other curriculum areas?
Looking for courses or advice on e-textiles from a textiles specialist?
Looking for courses to support KS3, 4 & 5 textiles?
NEED SUPPORT FOR YOUR D&T DEPARTMENT?
VISIT WWW.TEXTILESHOTLINE.CO.UK TO FIND OUT HOW I CAN SUPPORT D&T IN YOUR SCHOOL
EMAIL ME TO FIND OUT HOW I CAN SUPPORT TEXTILES IN YOUR SCHOOL [email protected]
ABOUT JULIE BOYD
Teaching & learning resources to buy & download for free
D&T newsletter
D&T Courses (including bespoke courses)
In school coaching, mentoring & training including for School Direct trainees
Student support e.g. intensive revision
Julie is an award winning teacher with extensive experience teaching D&T
and leading coaching and teaching and learning. She works as a consultant
supporting and training teachers and as an author. She is known for her
work raising the achievement of boys, her knowledge of teaching and
learning in D&T and her work to update the textiles curriculum including
the use of e-textiles.
Website: Email:Twitter:Facebook:
www.textileshotline.co.uk [email protected] @julieboydonline www.facebook.com/julieboydonline
Contact me now to chat about how I can support your school:
![Page 4: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/4.jpg)
£2.50
1+
£2.10
10+Code
2721
Description
Electro-Fashion - Light sensor
ELECTRO-FASHION CAT KIT
This cat kit contains all the items you need to make the cat (except for a pair of scissors and a needle). To make the cat the felt is cut into three pieces following the lines. The LED eyes, battery holder and switch are sewn on to a piece of felt following the stitch lines. Finally the cat is sewn together and stuffed with wadding. Pop the battery in and when the cat's ear is pressed the eyes will light.
£15.00
1+Code
2725
Description
Electro-Fashion - Cat kit
1 x Printed felt2 x Sewable green slim LEDs1 x Sewable push button switch.1 x Sewable coin cell holder
The kit contains:
www.kitronik.co.uk/quicklinks/light
www.kitronik.co.uk/quicklinks/cat
1 x CR2032 coin cell2m Conductive thread8m Embroidery thread Wadding
This is a prototype, and the final product maybe slightly different to the image shown.
ELECTRO-FASHION LIGHT SENSOR
This board allows LEDs to be turned on automatically when it is dark. On one side of the board is the coin cell holder, which takes a CR2032 coin cell as well as a small on off slide switch.
On the other side of the board is the light sensor. This design means that it is possible to cut a small hole in the front of the product for the light sensor to detect the light level, whilst also being able to get to the back of the board to change the battery and turn the board off. When turned off any connected LEDs will be off. When turned on the connected LEDs will be off in day light but come on in the dark. There are two sets of pads that can be used to connect LED to the board. The board measures 44 x 20 x 4.5 mm (excluding the light sensor, which is 2mm high)
![Page 5: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/5.jpg)
ELECTRO-FASHION CONDUCTIVE THREAD
This is Kitronik's very own Electro-Fashion branded conductive thread and we think it is among the best conductive thread available. It is perfect for hand sewing and can be used on the bottom bobbin of a sewing machine (this will require the thread to be wound on to the smaller bottom bobbin first). Reels of conductive thread are, 50 yards/ 45m.
Conductive thread can be used like conventional sewing thread, however it electrically conducts allowing electronics to be integrated into textiles. This makes it ideal for use in a range of e-textile applications. The conductive thread is approximately 18 denier. It is heavier than a regular sewing thread, but not as heavy as an upholstery thread.
£7.07
1+
£6.24
4+Code
2722
Description
Electro-Fashion conductive thread, 50 yards/ 45m
www.kitronik.co.uk/quicklinks/thread
CONDUCTIVE FABRICConductive fabric can be used to make a soft switch. Only a small amount is required per switch, so this sheet goes a long way. This is a conductive knit fabric for use in e-textiles, similar to a nylon ripstop material. It is highly conductive with a low surface resistivity.
Code 1+
£9.002716
Description
Conductive fabric – ripstop – 305 x 330mm
£20.002717Conductive fabric - stretch - 305 x 330mm
ELECTRO-FASHION FLASHER UNIT
Code 1+
£4.80
10+
£4.202719
Description
Electro-Fashion - Flasher controller and LEDs
This unit offers a simple way of adding 'flashing' white LEDs to a textiles project. The unit is programmed with a number of flashing patterns that are selected by a push button on the main PCB. Pressing this button cycles through the following patterns: all LEDs constantly on, slow flash all on all off, fast flash each in turn and turned off. The device features auto off, which turns the unit off after 30 minutes to preserve battery life. Depending upon flash pattern the battery lasts for approximately two days of constant use.This kit is supplied ‘pre-built’ so requires no soldering. Each kit comprises three small PCB’s. The largest of the three PCB’s holds an LED plus the control electronics, battery and a push button. On both of the remaining PCB’s there is an LED, which are connected to the main board with conductive thread.
Includes a CR2032 batteryIncludes approximately 2m of conductive thread
Dimensions: L34 x W20 x H9mm
![Page 6: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/6.jpg)
ELECTRO-FASHION - SEWABLE LED KITS
Code
27022703270427052706
Description
Flashing blue sewable LED kitFlashing green sewable LED kitFlashing red sewable LED kitFlashing yellow sewable LED kitColour changing sewable LED kit
£2.20£2.20£2.20£2.20£2.20
1+
£2.00£2.00£2.00£2.00£2.00
10+
Kits are packed ready for student use and include a coin cell holder, a coin cell, 2m of conductive thread and either two flashing LEDs or one colour changing LED. They allow lighting effects to be added to textiles designs without soldering.
Stitching example
Example
ELECTRO-FASHION - 60 STUDENT BULK PACK
Code
2707
Description
Sewable LED, 60 student bulk pack £105.00
1+
The bulk pack offers great value for teaching larger groups of students.
60 x Sewable coin cell holders
60 x CR2032 coin cell batteries
180m Conductive thread (3m per student)
Pack includes:
Example
10 x Colour changing LEDs 25 x Each of blue, red, yellow and green flashing LEDs
This fantastic ‘Electro-Fashion’ range has been specially designed so electronics can be used in textiles. The kits use ‘conductive thread’ which is a thread that can be used like cotton thread but conducts like a wire.
ELECTRO-FASHION - DISCOVERY PACK
Code
2715
Description
Electro-Fashion - Discovery Pack £19.50
1+
This pack is a great way of getting started with E-Textiles. The pack contains a selection of the popular products from our 'Electro-Fashion' range.
1 x Electro-Fashion sewable coin cell holder, 2m thread and colour changing LED3 x Electro-Fashion sewable coin cell holder1 x Small conductive thread bobbin (6m)1 x Blue sewable PCB LED - pack of 101 x CLN coin cell, CR2032, strip of 5
1 x White sewable PCB LED - pack of 101 x Sewable coin cell holder with built in power switch1 x Sewable push switch1 x Sewable slide switch1 x Sewable tilt switch
x1
x3
x20
x5
x1
x1x1
x1 x1
SEWABLE LED KITS, DISCOVERY PACK
![Page 7: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/7.jpg)
Kits are packed ready for student use and include a coin cell holder, a coin cell, 2m of conductive thread and either two flashing LEDs or one colour changing LED. They allow lighting effects to be added to textiles designs without soldering.
LITHIUM 3V COIN CELLS10+Description
£1.00
1+
£1.203V CR2032 - 200mA/h - 5 pack
£1.00£1.203V CR1220 - 40mA/h - 5 pack
Code
2262
2267
SEWABLE COIN CELL HOLDER
10+Code
£0.90
1+
£1.102701
The specially designed coin cell holder has large connection points for the conductive thread and are marked to show the battery polarity. It is available on its own, to incorporate into your own designs.
Accepts CR2032 battery
Dimensions: L34 x W20 x H4.5mm
SWITCHED COIN CELL HOLDER
10+Code
£1.55
1+
£1.852711
This specially designed coin cell holder has large connection points for the conductive thread. These are clearly marked to show the battery polarity. The unit also has a small power switch so that you can turn the power on and off.
Accepts CR2032 battery
Dimensions: L44 x W20 x H4.5mm
MINIATURE COIN CELL HOLDERThis specially designed coin cell holder has large connection points for the conductive thread. These are clearly marked to show the battery polarity.
Accepts CR1220 battery
1+Code
£1.102718
Dimensions: L22 x W12.5 x H4mm
SEWABLE PUSH SWITCH
10+Code
£0.50
1+
£0.752708
This push button switch will allow LEDs to light whilst the switch is pressed.
Dimensions: L18 x W8.5 x H6mm
SEWABLE SLIDE SWITCH
10+Code
£0.70
1+
£0.952709
This two position miniature slide switch allows LEDs to be turned on or off in textiles projects.
Dimensions: L18 x W8.5 x H4mm
SEWABLE TILT SWITCH
10+Code
£0.85
1+
£1.052710
When horizontal this switch is off. When tilted 10° from horizontal the tilt switch is on.
Dimensions: L26 x W6.5 x H7mm
COIN CELLS, HOLDERS & SWITCHES
![Page 8: Kitronik April 2013 Electro-Fashion Update](https://reader034.vdocuments.mx/reader034/viewer/2022051518/568c47951a28ab49168e882a/html5/thumbnails/8.jpg)
SEWABLE PCB LEDS
Code
271227132714
Description
Electro-Fashion, LED board, red - 10 packElectro-Fashion, LED board, blue - 10 packElectro-Fashion, LED board, white - 10 pack
£4.20£3.50£3.50
1+
These ultra slim, pre-mounted LEDs are illuminated continuously. They have connections to which the conductive thread can be connected. These are clearly marked with '+' and '-' to indicate which is the positive and which is the negative connection.
The PCBs are double sided making the thread connection very reliable. They are supplied on a small panel and the LEDs can easily be removed by snapping them out.
Dimensions: L15 x W6.5 x H3mm
FLASHING LED
Code
3538353935403545
Description
LED 5mm flashing - red - 25 packLED 5mm flashing - green - 25 packLED 5mm flashing - yellow - 25 packLED 5mm flashing - blue - 25 pack
£3.40£3.40£3.40£3.40
1+
These flashing LEDs can be used with the Electro-Fashion coin cell power boards. 5mm flashing LEDs in red, green & yellow. The LEDs flash at around 2Hz when connected to a 5V supply.
PCB LEDS & FLASHING LEDS
0845 8380781T:
KitronikUnit 3a, Shipstones Business Centre, North Gate, Nottingham, NG7 7FN
A:
www.kitronik.co.ukW:[email protected]:
www.kitronik.co.uk/twitter
www.kitronik.co.uk/facebook
www.kitronik.co.uk/youtube
www.kitronik.co.uk/google
All prices shown are exclusive of VAT, delivery charge may be applicable.
Request your free sample sewable LED kit by phone, email or online at:
www.kitronik.co.uk/services/samples/
FREE SAMPLES
Designed & manufactured in the UK by Kitronik