kit for 2x2 and 2x4 lay-in fixtures - razrlitesrazrlites.com/content/razrflexbrochure.pdf ·...
TRANSCRIPT
• One piece bracket installs in one motion
• Pre-Wired and Pre-Loaded with fasteners for fast installation
• Universal bracket accepts 1-5 LED Tubes
• Celeritas T8 Ballast by-pass (single ended) LED Tubes (included for ultimate flexibility and longevity*)
• Bi-level switching available
FEATURES
*Five year limited warranty
CELERITAS LED TUBE SPECIFICATIONS
ST8LED-18W-XXK-FST8LED-9W-XXK-F
Model No. Input Frequency Wattage CCT CRI LUMEN
50-60Hz50-60Hz
100-277V100-277V
18W
9W
PF
>0.90
>0.904000K-5000K 80
80 2200 1100 4000K-5000K
2’x4’
2’x4’
2’x4’
2’x2’
2’x2’
Size # of LED Tubes Total Watts Total Lumens4
3
2
3
2
8800
6600
4400
3300
2200
72
54
36
27
18
Warning: LED tubes cannot be used with shunted sockets. USE ONLY THE SOCKETS INCLUDED IN THE RETROFIT KIT.
Included Parts• 1-4 UL & DLC certified T8 LED Tubes
• One-piece Razr-Flex kit-Pre-wired with sockets
• UL Warning Sticker already on Kit
• Pre-Loaded Fasteners
W= 14 1/4" L= 47 7/8"
US Patent Pending
RAZR FLEX BY
RAZRLITES(702) 979-1000
Visit us at: RazrLites.com
Example Part# RFLT 2-4-18W-40K
W
L
KIT FOR 2X2 AND 2X4 LAY-IN FIXTURES
JUST THE FASTEST,
MOST VERSATILE, RETROFIT
ON THE MARKET!
NO MAGNETSNO GIMMICKS
Model No.
Warning: LED tubes cannot be used with shunted sockets. USE ONLY THE SOCKETS INCLUDED IN THE RETROFIT KIT.
PLUG AND PLAY vs RARZ-FLEX
MAGNETIC LED STRIP RETROFITS vs RAZR-FLEX
PLUG AND PLAY TUBES ARE A SHORT-TERM COST SAVER…BUT ARE COSTLY OVER THE LONG TERM BECAUSE OF MAINTENANCE COST!
• Plug and Play is a one for one replacement only! Razr-Flex allows for lamp reduction for maximum savings!
• Plug and Play ballasts add unnecessary watts and unpredictable lumen output based on ballast factor! Razr-Flex uses less watts and high lumens with every application!
• Plug and Play ballasts WILL fail in the future, causing another maintenance situation and increased costs! Razr-Flex eliminates this cost forever!
• Plug and Play tubes are NOT compatible with all brands of ballasts and WILL NOT work with magnetic ballasts! Razr-Flex has a built-in driver…IT ALWAYS WORKS!
• The LED strip or light engine is proprietary, YOU are stuck with this product no matter what happens. Razr-Flex uses standard LED Tubes that can be replaced easily with maximum flexibility!
• In some systems, the LED magnetic strips are powered with multiple wiring connections that must be made by the installer. Razr-flex uses one connection saving time and MONEY!
• In some systems, external drivers are required, another part to fail, and a second step during installation. Razr-Flex tubes are self-driven so replacement is quick and easy!!
• Most systems use higher wattages to achieve light levels. Razr-Flex uses less watts and high lumens with every application!
• LED kits with fixed light engines must be completely replaced when one light fails. Razr-Flex tubes allow for quick replacement of a single tube!
• Some systems use one kit for many applications that cause wires to be pinched under brackets and wire covers, creating an unsafe situation. Razr-Flex safely guards all wires from pinching and chafing because Razr-Flex kits are application specific! RazrLites has a kit for each application on your project!
Magnetic led strip Retrofit installations may seem like a good solution to save on installation cost, but have many disadvantages to consider:
RAZR-FLEX IS THE FASTEST AND SAFEST KIT ON THE MARKET!
RAZRLITES(702) 979-1000
Visit us at: RazrLites.com
RAZR FLEX BY