kit 1507 kenworth w900 · kit 1507 85150700200 if you have any questions or comments, call our...
TRANSCRIPT
-
Semi Gloss Black
Flat Tan
Gloss Blue
Yellow
Gloss Orange
Aluminum
Silver
Steel
Turn Signal Amber
Transparent Red
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* OPTIONAL PARTS
* PIECES EN OPTION
* DECAL
* DECAL COMANIE
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Noir satiné
Havane mat
Bleu brilliant
Jaune
Orange brilliant
Aluminum
Argent
Acier
Ambre
Rouge Transparent
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and
slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any excess adhesive.
8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
KENWORTH ® W900 KIT 1507 85150700200
If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85150700200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
The Kenworth W900 has every-
thing that long-haul truckers need
to get the job done. This impres-
sive Kenworth design sports a
duel sleeper capped with an
aerodynamic roofline which tells
everyone who sees it that it is truly
a road machine without equal.
Your Revell model features a
hood that tilts forward to show a
detailed tubocharged six cylinder
diesel engine, chrome plated sim-
ulated alloy wheels, duel exhaust
stacks, roof mounted horns and
mirrors with antennas. Decals
with optional stripes or cus-
tom graphics are also included.
-
REAR SUSPENSION ASSEMBLY1
FUEL TANK ASSEMBLY2
Kit 1507 - Page 2
72FRONT
AXLE BOTTOMSEMI GLOSS
BLACK
39FRAME
SEMI GLOSS BLACK
44SUSPENSION
SEMI GLOSS BLACK
46REAR
AXLE BOTTOMSEMI GLOSS
BLACK
★31FUEL TANK HALF
CHROME
★
★ ★
★
★
★
★
★
★32FUEL TANK HALF
CHROME
41AIR TANKALUMINUM
41AIR TANKALUMINUM
★33FUEL TANK HALF
CHROME
★34FUEL TANK HALF
CHROME
58SUSPENSION
SUPPORTSEMI GLOSS BLACK
58SUSPENSION
SUPPORTSEMI GLOSS BLACK
-
REAR WHEEL ASSEMBLY3
FRONT SUSPENSION ASSEMBLY4
Kit 1507 - Page 3
★500UTER WHEEL
CHROME
52INNER WHEEL
SEMI GLOSS BLACK
45TIE ROD
SEMI GLOSS BLACK
38AXLE
SEMI GLOSS BLACK55
SHOCKSEMI GLOSS BLACK
55SHOCK
SEMI GLOSS BLACK
51SPACER
SEMI GLOSS BLACK
★
★
★
★
★
★
★
CUT-A-WAY VIEW
-
DRAG LINK ASSEMBLY5
FRONT WHEEL ASSEMBLY6
CROSSOVER / EXHAUST ASSEMBLY7
Kit 1507 - Page 4
71CROSSOVER
PIPEALUMINUM
73EXHAUST
COLLECTORSTEEL
★480UTER WHEEL
CHROME
★
★
★ ★
49INNER WHEEL
SEMI GLOSS BLACK
57STEERING LINKSEMI GLOSS BLACK
-
ENGINE ASSEMBLY 8
Kit 1507 - Page 5
65PULLY
ASSEMBLYYELLOW PULLIES WITH SEMI GLOSS
BLACK BELTS
64TIMING COVER
YELLOW
67COMPRESSOR
ALUMINUM
66AFTER COOLER
YELLOW
63HEAD ASSEMBLY
YELLOW
70INJECTION
PUMPYELLOW
SEMI GLOSS BLACK
61LEFT
ENGINE HALFYELLOW
SILVER
SEMI GLOSSBLACK
74OIL FILTER
YELLOW
62RIGHT
ENGINE HALFYELLOW
ENGINE TO FRAME
RIGHT SIDE OF ENGINE
★
★
-
DRIVESHAFT ASSEMBLY9
INTERIOR ASSEMBLY10
Kit 1507 - Page 6
47DRIVESHAFT
SEMI GLOSS BLACK
3SEATS
TAN
7GEAR SHIFT
SEMI GLOSS BLACK
5STEERING COLUMN
SEMI GLOSS BLACK
6STEERING
WHEELSEMI GLOSS
BLACK
4DASHBOARD
TAN DIALS, BLACK WITH
SILVER RIMS AND DETAILS
2INTERIOR
TAN
-
CAB / INTERIOR ASSEMBLY11
Kit 1507 - Page 7
8WINDSHIELD
CLEAR
1CAB
BODY COLOR
59SLEEPER WINDOW
CLEAR
68AIR DUCTALUMINUM
SEMI GLOSS-BLACK
SEMI GLOSS BLACK
INTERIOR INTO CAB
BOTH
SIDES
CAB TO FRAME
CUT-A WAY
SHOWING
REAR SLOT
-
AIR CLEANER ASSEMBLY12
BOX STEP ASSEMBLY13
Kit 1507 - Page 8
12AIR CLEANER
HALFBODY COLOR
11AIR CLEANER
HALFBODY COLOR
13AIR CLEANER
HALFBODY COLOR
10AIR CLEANER
HALFBODY COLOR
15AIR CLEANER
BRACKETSBODY COLOR
RIGHT
RIGHT
FIRST
LEFT
LEFT
★36BATTERY BOX
STEPCHROME
★14AIR CLEANER
CAPSCHROME
SECOND
-
STACK ASSEMBLY14
RADIATOR ASSEMBLY15
Kit 1507 - Page 9
★
★530UTER STACK
CHROME
★54INNER STACK
CHROME
★69GRAB
HANDLECHROME
28RADIATOR
FRONTSEMI GLOSS BLACK
29RADIATOR REARSEMI GLOSS BLACK
★69GRAB
HANDLECHROME
-
REAR ASSEMBLY16
GRILLE ASSEMBLY17
Kit 1507 - Page 10
★
★24GRILLECHROME
★22HEADLIGHT
HOUSINGCHROME
★22HEADLIGHT
HOUSINGCHROME23
HEADLIGHT LENS CLEAR
23HEADLIGHT
LENS CLEAR
6HOOD
BODY COLOR
★35GRAB HANDLE
CHROME
★35GRAB HANDLE
CHROME
★40SKID PLATE
CHROME
DECAL23
DECAL23
42MUD FLAPS
SEMI GLOSS BLACK
★43TAILLIGHTS
CHROME(PAINT LENS
TRANPARENT RED)
30QUARTER FENDER
SEMI GLOSS BLACK
26PIVOT
SEMI GLOSS BLACK
27FIFTH
WHEELSEMI GLOSS
BLACK
-
FRONT BUMPER ASSEMBLY18
FINAL ASSEMBLY19
Kit 1507 - Page 11
21BUMPER LIGHTS
CLEAR
★
★25BUMPERCHROME
OR DECAL 30
★18AIR HORN
CHROME
★18AIR HORN
CHROME★19
CAB LIGHTCHROME
(PAINT SHADED AREA AMBER)
★60RIGHT
SIDE MIRRORCHROME
★20LEFT
SIDE MIRRORCHROME
★19CAB LIGHT
CHROME(PAINT SHADED AREA AMBER)
★19CAB LIGHTS
CHROME(PAINT SHADED AREAS AMBER)
TURN SIGNAL-AMBER FRONT
RED BACK
TURN SIGNAL-AMBER FRONT
RED BACK
★
★
★
PAINTRED
-
DECAL PLACEMENT20
★★
Kit 1507 - Page 12