kingspan daylighting systems izolacione panel ploce
DESCRIPTION
KS1000 RW je trapezoidni krovni sistem koji koristi vidljivo kačeći metod pričvršćivanja i pogodan je za građevinske primene gde je nagib krova 4° i više (7%), za krovove gde se paneli postavljaju od slemena do strehe.KS1000 RW panel se često koristi i kao zidna obloga.TRANSCRIPT
Let the Sunshine and brighten your building IN
Kingspan Daylighting SystemsThe simplest way to save energy, money and environment
2 Kingspan Daylighting Systems
Introduction
Daylighting is essential for healthy living, it is an established fact
that ample daylight improves a general feeling of health and well-
being in the workforce and improves productivity and safety.
Using as much natural light in buildings as
possible has many advantages over using
artifi cial lights, if its penetration is appropriately
controlled.
Light is not only an amount of energy,
it also provides us with the eans to reveal spaces
and volumes and interact with our environment.
Let the Sunshine in and brighten your buildingLet the Sunshine in and brighten your building
3
Daylight
savings
4KS1000
Hybrid
Thermalight
6
KS1000
Wall-Lite
30
KS1000
RW/GRP
24
Tubular
skylights
40Roof
Insulated
Upstands
42Energy
Effi cient
Buildings
44
Content
KS1000
Polycarb
Roofl ight
16
4 Kingspan Daylighting Systems
In a typical building, lighting accounts
for 25-40% of energy consumption!
By allowing more natural light to penetrate
and controlling both its light and heat
components, the fi nancial savings could be
considerable.
Daylighting cuts energy use and pollution.
Power plants fueled by oil, coal and gas dump
thousands of tons of pollutants into the environ-
ment every day. By cutting demand for energy
production, we cut pollution, too.
Studies have proven daylighting makes
employees more comfortable and productive.
Reduced absenteeism, employee satisfaction
and higher productivity are all bottom line benefi ts
from the use of natural daylighting. An increase
of just 1% in productivity provides enough
fi nancial savings to a company to pay their entire
energy bill.
In addition to its health and fi nancial benefi ts,
natural light also provides an almost “perfect
white light” that has a number of visual benefi ts.
Best of all, natural light is “of course, plentiful.
People love natural light. Subconsciously, unknowingly, we seek out sunlit places and enjoy spend-
ing time in natural light. Beyond this desire, however, are some tangible benefi ts to adding natural
daylighting into buildings:
Daylight savings
of roof area (prismatic daylighting) reduces lighting
energy demand by during daylight hours.
5Let the Sunshine in and brighten your building
Bright Benefi ts
The primary reason for including wall&roofl ights
is to provide a bright, naturally lit interior and
reduce the requirement for artifi cial lighting.
Daylight has many advantages over artifi cial
light - not least the fact that it is a completely
free, unlimited natural resource. Whilst artifi cial
light is essential, it’s provision uses a lot of energy,
so reducing the requirement will dramatically cut
energy use, and the CO2 emissions which result
from this.
Light panels save energy
and reduce carbon emissions.
Can replace electric lighting 70 to 80%
of the daylight hours while producing
much less heat than electric lighting.
Improve employee morale
Reduce absenteeism
Reduce errors
Improve product quality
Increase productivity
Increase sales in retail stores up to 40%
Kingspan Roof & Wall Light Panels
TABLE 2
Climate Zone City Offi ce School Warehouse RetailMDS Athens, GR 1.91 2.38 2.55 5.09MDN Split, CR 2.07 2.55 2.55 4.45ALS Innsbruck, AT 1.82 2.07 2.07 3.51PAN Debrecen, HU 1.75 1.91 1.85 3.33CON Warsaw, PL 1.60 1.70 1.70 3.03ATN Bremen, DE 1.44 1.55 1.48 2.69
Energy Cost Savings €/yr/m2, by Climate Zone, City and Building Type*
TABLE 1 Simple Payback Period, years, by Climate Zone and Building Type
Climate Zone City Offi ce School Warehouse Retail MDS Athens, GR 36 30 6.2 3.9MDN Split, CR 37 31 7.7 4.5ALS Innsbruck, AT 40 37 9.6 5.6PAN Debrecen, HU 41 38 10.2 6.1CON Warsaw, PL 43 40 10.8 6.6ATN Bremen, DE 44 41 11.4 7.2
Depending on climate and building type,
toplighting can save between 1,4 - 5,0 EUR/ m2 per year!
MDS - Mediterranean South, MDN - Mediterranean North, ALS - Alpine South, PAN - Pannonian, CON - Continental, ATN - Atlantic North* Calculated taking into consideration average energy cost of 1 kWh =0,16 € for all these cities/countries
(Source: Eurostat)
6 Kingspan Daylighting Systems
IntroductionEvery workplace should have suitable and suffi cient
lighting, which should, so far as is reasonably prac-
tical, be by natural light. The most effective method
of providing even, consistent daylight, particularly
in large buildings, is through roofl ights, which are
up to three times more effective than windows
around the perimeter of the building.
Diffused lighting should be used to provide
even light distribution and avoid glare.
Energy savings is the most easily quantifi ably
of the benefi ts. We found that an economically
optimum toplighting system using skylights saved
35-55% of annual lighting energy while having
a much smaller impact on both heating
and cooling energy consumption.
Lower your energy bills up to 55 % with Kingspan
Hybrid Roofl ights.
KS1000 Hybrid ThermalightNatural Light Trapezoidal
Translucent System
APPLICATION FACTORY, WAREHOUSE ENVIRONMENTS
ROOF PITCH 6 DEGREES OR ABOVE
LIGHT TRANSMISSION 55-65 %
KS1000 RW/HTL offers excellent interior
levels of natural light without compromising
the performance of the building. This can help
to lower both energy bills and CO2 emissions.
KS1000 RW/HTL
7Let the Sunshine in and brighten your building
ApplicationKS1000 RW/HTL is a translucent roof element
that allows natural daylight into buildings,
whilst maintaining thermal effi ciency and
aesthetic appearance. This is a product
with GRP top sheet and polycarbonate
bottom sheet combination for buildings
with Kingspan RW Roof panel where
the thermo insulation and the designed
surface is required.
The KS1000 RW/HTL is UV resistant, light-
weight and offers better U-value (1,34 - 2,12
W/m2k), designed surface and form offering
designers and installers choice of freedom to
create energy effi cient buildings of distinction.
System Benefi ts U-value is 1,34 W/m2K
(with 32 mm polycarb sheet)
Better light transmission
UV resistant
Available of the range of colours
(clear, opal, brass)*
Factory manufactured
Available lengths from 1 m up to 6,25 m
(total length with cutback)
Modular width is 1000 mm
(the same as roofpanel)
Lightweight and durable
Factory fi tted PET spacers to facilitate faster
installation and reduce site wastage
Manufactured sites are ISO 9001: 2008,
ISO 14001 (Environmental)
8 Kingspan Daylighting Systems
Detail Of The Profile
333mm 333mm 333mm
1000mm
GRP top sheet
sealant (site applied)
Closed cell PVC sealant
(factory applied)
Polycarb sheet with polycarb cover profiles
on the two end part (factory applied)
sealant (site applied)
Filler foam in the end part of rooflight
Available LengthsStandard lengths are from 1,25 to 6,25 m.
The shape of the GRP top layer is same
as the shape of KS1000 RW roof panel.
Product Tolerances
Thermal PerformanceThe thermal insulation (U value) for KS1000 RW/HTL
is 1,34 to 2,12 W/m2K.
Fire PerformanceFor detailed information please contact local
Kingspan Technical Department.
Light Transmission
Seals and FillersKS1000 RW/HTL is fi tted with PVC sealing tape on
side laps (factory applied) and anti-condenstation
tape P19 (30x8) on panel end laps (applied on site).
Product Data22 644 2
Length +/- 10 mm (fi nished product)
Width +/- 10 mm (polycarbonate)
Thickness +/- 2 mm (fi nished product)
KS
1000
Hyb
rid
Therm
alig
ht
KS1000
Hybrid Thermalightapproximately 55-65 %
Panel thickness 16 25 32
Weight (kg/m2) 5,0 5,9 6,6
9Let the Sunshine in and brighten your building
PackingThe Hybrid Roofl ights are stacked weather
side to weather side (to minimise palette
height), protected with foil and edge covers.
DeliveryAll deliveries (unless indicated otherwise)
are by road transport to project site.
Off loading is the responsibility of the client.
InstallationSite assembly instructions are available
from Kingspan.
Safety
NOTE: In the interest of safety, you should NEVER walk on a roofl ight no matter what grade of con-struction it may be.
10 Kingspan Daylighting Systems
at 300mm
at 300mm
at 300mm
PVC sealing tape
(factory applied)
KS1000 RW
Roof purlin
at 300mm
KS 1000 RW/HTL
Roof purlin
KS1000 RW
KS 1000 RW/HTL
03
P
19
P 243
K
08
P
08
P
21
P
21
P
29
P
242
K
19
P
27
P
Construction details
KS
1000
Hyb
rid
Therm
alig
ht
Roofl ights KS1000 RW/HTLSide Laps
KS1000 RW panel to KS1000 RW/HTL
Side Laps
KS1000 RW/HTL to KS1000 RW panel
11Let the Sunshine in and brighten your building
B
B
A
A
150 - 300
50
30
rivet "bulbtite"
type between
crowns
KS1000 RW/HTL
callote
"overlay"
of distance profile
KS1000 RW
distance profile
support
fasteners
(distance profile to purlin)
additional support
if purlin width is < 100 mm
27
P
08
P
04
P
21
P
at 300mm
End Lap DetailUpslope - KS1000 RW panel to RW/HTL
Section A-A
Section B-B
Fastener Locations RW/HTL
12 Kingspan Daylighting Systems
KS1000 RW/HTL
calotte
"overlay"
of distance profile
distance profile
support
fasteners (distance
profile to purlin)
additional support
if purlin width is < 100 mm
30
50150 - 300
B
B
A
A
KS1000 RW
at 300mm
03
P
04
P
21
P
08
P
Construction details
KS
1000
Hyb
rid
Therm
alig
ht
End Lap DetailDownslope - RW/HTL to KS1000 RW panel
Section A-A
Section B-B
Fastener Locations RW/HTL
13Let the Sunshine in and brighten your building
B
B
A
A
30
30
150 - 300
"overlay"
of distance profile
distance profile
support
fasteners
(distance profile to purlin)
additional support
if purlin width is < 100 mm
callote
distance profile
support
side
flashing
side
flashing
rivet "bulbtite"
type between crowns
21
P
21
P
27
P
08
P
04
P
End Lap DetailRW/HTL to RW/HTL
Section A-A
Section B-B
Fastener Locations RW/HTL
14 Kingspan Daylighting Systems
A
A
KS1000 RW/HTL
callote
"overlay"
of distance profile
distance profile
support
fasteners
(distance profile to purlin)
04
P
08
P
Construction details
KS
1000
Hyb
rid
Therm
alig
ht
Intermediate DetailRW/HTL
Section A-A
Fastener Locations RW/HTL
16 Kingspan Daylighting Systems
IntroductionSustainability is the latest buzzword in not just
the construction industry, but in the wider environ-
ment too. Sustainability however is far from just
being a ‘fad’ it is a way of living and constructing,
to help preserve the environment in which we live.
There are indeed many ways of acting sustainably,
but one of the easiest and cost effi cient ways is to
reduce the energy that we use.
How though, do you reduce the amount
of artifi cial light yet maintain a workable level
of lighting? The answer is to incorporate roofl ight
systems into roof constructions.
By allowing more natural light in to a building,
the need for artifi cial lighting is reduced.
The benefi ts of using roofl ights go further than
just reducing our energy consumption; research
has shown that increased levels of daylight can
aid health, learning and also increase productivity.
The Kingspan Polycarb Roofl ight allows natural
light to penetrate in to the building, therefore
reducing the need for artifi cial lighting.
The roofl ight system, which is designed for use
with the KS1000 RW system, is made from
polycarbonate, a lightweight, high performance,
durable plastic. It has superior UV resistance and
will not discolour over time coupled with a U-value
of 1.64W/m²K.
KS1000 Polycarb Roofl ightNatural Light Trapezoidal
Translucent System
APPLICATION FACTORY, WAREHOUSE ENVIRONMENTS
ROOF PITCH 7 DEGREES OR ABOVE
LIGHT TRANSMISSION UP TO 63 %
One way of reducing the energy we use
is to reduce our reliance on artifi cial lighting
to light our buildings.
17Let the Sunshine in and brighten your building
ApplicationThe following specifi cation is for the Kingspan
Polycarb Roofl ight system used for normal
factory or warehouse environments, with
a roof pitch of 7 degrees or above after
defl ection and where the occupants
or processes do not add signifi cant
quantities of water to the air.
System Benefi ts Thermal performance: U-value 1.64W/m2K
Excellent light transmission – up to 63%
to EN410 standard
Available as either clear or opal fi nish
Available in lengths of 1.8 – 6.44m
Fire Performance – Class 1Y
Single component: fast installation leading
to accelerated build speed
Simple to fi x: no glazing experience necessary
Lightweight and durable
Cost effective
Recycling
The Kingspan Polycarb Roofl ight is 100%
recyclable, which means that at the end of its
life, it can be completely recycled unlike many
composite roofl ights in which only certain
elements can be recycled.
Substantial energy savings can be made
by using waste materials rather than raw materials,
these energy savings can be made from reducing
transportation emissions and the processing
of raw materials.
The amount of material that ends up in landfi ll
is reduced. This not only prolongs the life
of the currently diminishing landfi ll sites but
also reduces the amount of gases released
in to the atmosphere from this process.
Polycarbonate also has a scrap value, potentially
rendering the process of removing and disposing
of the panel at end of life cost neutral/positive.
Therefore using a 100% recyclable polycarbonate
roofl ight has both economic and environmental
benefi ts.Kingspan Polycarb Roofl ights allow natural light
to penetrate in to the building, therefore reducing
the need for artifi cial lighting.
Through recycling, a number of benefi ts can be achieved.
18 Kingspan Daylighting Systems
Polycarb Rooflight - Application with KS1000 RW
1000mm
333mm333mm
Dim
A
Dim
B
333mm
35m
m
End Lap Cut Back
StandardCut back150mm
Panel end lap
Available LengthsKingspan Polycarb Roofl ight panels are available
in standard lengths from 1,175 - 8,0 metres.
Longer lengths can be manufactured on request.
Dimensions & Weight
Product Tolerances
Thermal PerformanceThe thermal insulation (U value) for KS1000 PC
is 1.64 W/m2K.
Fire PerformanceFor detailed information please contact local
Kingspan Technical Department.
Light Transmission
Seals and FillersA magnetic 0.9mm PVC 30 mm wide support
block is supplied loose and is to be fi tted at purlin
(Kingspan Multibeam) positions. 20mm vented
and blocking tapes are applied to either ends
of the polycarbonate box to reduce the risk
of condensation.
Product Data22 666444 22
Cut to Length (mm) –3 +3
Liner Sheet Length (mm) –3 +3
Thickness (mm) –3 +3
End Square (mm) –5 +5
Dimension A - core thickness nominal (mm) 20
Dimension B - overall dimension (mm) 55
Weight kg/m2 3.3
Clear Polycarbonate
63% light transmission to EN410
76% solar transmission to DIN 67507
Opal Polycarbonate
59% light transmission to EN410
67% solar transmission to DIN 67507
KS
1000
Po
lycarb
Ro
ofl i
ght
19Let the Sunshine in and brighten your building
Packing
Standard Packing
Kingspan Polycarb Roofl ights are stacked in-
terleaved (to minimise pack height). The top,
bottom, sides and ends are protected with
foam and timber packing and the entire pack
is wrapped in plastic. Spacers are provided
loose in packs, typical maximum pack height
is 1100 mm.
Delivery
Road Freight
All deliveries (unless indicated otherwise) are
by road transport to project site. Unloading
is the responsibility of the customer.
Sea Freight
Fully timber crated packs are available on
projects requiring delivery by sea freight
shipping, at additional cost. Alternatively,
steel containers can be used. Special loading
charges apply.
InstallationAll fasteners, seals and fi llers to be of correct
specifi cation and installed as indicated in the
Kingspan Polycarb Roofl ight Installation
Guide.
Fasteners to be checked and adjusted if nec-
essary to ensure they are weather tight and
external roofl ight facing is not distorted.
Safety
The contractor is to determine and use a safe system
of working throughout the installation and construction
period which complies with the HSA or HSE and CDM
requirements. Crawling boards should be used when
fi xing roofl ights.
NOTEIn the interest of safety, you should never walk on a roofl ight no matter what grade or construction it may be.
20 Kingspan Daylighting Systems
End Lap Detail
Kingspan Polycarb Rooflight Panel Tail Stitcher Locations
Note: Project specific construction details must be used.
Side Lap Detail
Kingspan Polycarb Rooflight Primary and Side Lap Fasteners
4 No. main fixings withstorm washers
4 No. main fixings withstorm washers
KS1000 RW insulated roof panel
Kingspan Polycarb Rooflight
Site appliedspacer
Direction of layPVC painted steel strip(factory fitted)
30 min
Site applied
magnetic spacer4 No. main fixings withstorm washer in eachcrown location, perrooflight, per purlin
Kingspan Polycarb
Rooflight
Side lap stitched at 300mmcentres with 6.3mm x 25mmstitching screws with 19mmwashers
Side lap stitched at 300mmcentres with 6.3mm x 25mmstitching screws with 19mmwashers
Kingspan Polycarb Rooflight to Panel Side Lap Panel to Kingspan Polycarb Rooflight Side Lap
6 x 5mm butyl rubbersealant on weather side
6 x 5mm butyl rubbersealant on weather side
PVC painted steel strip(factory fitted)
6 x 5mm butyl rubber sealant appliedin continuous unbroken length at sidelap to weather side of stitching screw
6 x 5mm butyl rubber sealant appliedin continuous unbroken length at sidelap to weather side of stitching screw
Side laps stitched at max 300mm c/cs with“Mega-stitcher” screws (typ 6.3mm dia x
25mm long) with 19mm dia washers
Side laps stitched at max 300mm c/cs with“Mega-stitcher” screws (typ 6.3mm dia x25mm long) with 19mm dia washers
End lap stitchers onlyinserted where rooflight endlaps over KS1000 RW panel
PVC painted steelstrip (factory fitted)
Construction details
KS
1000
Po
lycarb
Ro
ofl i
ght
21Let the Sunshine in and brighten your building
End Lap Detail
Kingspan Polycarb Rooflight to KS1000 RW Panel
End laps crown stitched 2 timeswith “Mega-stitcher” screws(typ 6.3mm dia x 25mm long)with 19mm dia washers
KS1000 RW insulated roof panel
150mm end lap
50mm
30 min 30 min
50mm
Kingspan Polycarb Rooflight
4 No. main fixings with storm washer in eachcrown location, per rooflight, per purlin
Site applied magnetic spacer
Additional run of 6 x 5mm butyl rubber sealant
3 runs of 6 x 5mm butyl rubbersealant applied in continuousunbroken lengths at end lap
KS1000 RW Panel to Kingspan Polycarb Rooflight
End laps crown stitched 2 timeswith “Mega-stitcher” screws(typ 6.3mm dia x 25mm long)with 19mm dia washers
150mm end lap
50mm
30 min 30 min
50mm
Nominal 15mm
Minimum 10mm
KS1000 RW insulated roof panel
4 No. main fixings with stormwasher in each crown location,
per rooflight, per purlin
3 runs of 6 x 5mm butyl rubbersealant applied in continuousunbroken lengths at end lap
Site applied magnetic spacer
Kingspan PolycarbRooflight
22 Kingspan Daylighting Systems
Note: Project specific construction details must be used.
End Lap Detail
Kingspan Polycarb Rooflight to Kingspan Polycarb Rooflight
Intermediate Detail
Intermediate Purlin Fasteners
150mm end lap
50mm
30 min 30 min
50mm
Nominal 15mm
Minimum 10mm
Kingspan PolycarbRooflight
4 No. main fixings with storm washer in each crownlocation, per rooflight, per purlin
3 runs of 6 x 5mm butyl rubbersealant applied in continuousunbroken lengths at end lap
Site applied magnetic spacer
Kingspan PolycarbRooflight
Additional run of 6 x 5mmbutyl rubber sealantEnd laps crown stitched 2 times with “Mega-stitcher” screws
(typ 6.3mm dia x 25mm long) with 19mm dia washers
Kingspan Polycarb Rooflight
Site applied magnetic spacer
Position of 4 No. main fixings with 19mmdia. and storm washers to crowns
30 min
Construction details
KS
1000
Po
lycarb
Ro
ofl i
ght
23Let the Sunshine in and brighten your building
Intermediate Detail Intermediate Spacer Location
The innovative spacer is magnetic and supplied loose.
This allowsroofl ights to be supplied without having
to detail intermediate purlins and avoids problems
with purlin misalignment.
24 Kingspan Daylighting Systems
KS1000 RW/GRP
APPLICATION ALL TYPES OF BUILDINGS
ROOF PITCH 6 DEGREES OR ABOVE
LIGHT TRANSMISSION UP TO 70%
ApplicationThe KS1000 RW/GRP are factory assembled
double skin roofl ights which can be used
with KS1000 RW where the roof slope is 6°
(10%) or more. Maximum availble panel length
is 6500 mm including overlap. Roofl ight panels
can be laid as chequerboard or in ridge following
roof inclination, roofl ight panels layout infl uences
daylight spread inside the building.
System Benefi ts Excellent light transmission - up to 70%
to EN410.
Available in lengths up to 6,5 m.
Side Lap sealants factory applied
Single component: fast installation leading
to accelerated build speed.
Simple to fi x and no glazing experience
necessary.
Lightweight and durable.
No need to use spacers – the same thickness
as panel
Manufacturing sites are ISO 9001:2008 (Quality)
and ISO 14001 (Environmental) accredited.
Natural Light Trapezoidal
Translucent System
25Let the Sunshine in and brighten your building
Available LengthsKS1000 RW/GRP roofl ights are available in standard
lengts from 1.8 to 6.5 metres.
Product Tolerances
Thermal PerformanceThe thermal insulation (U value) for KS1000 RW/GRP
all thicknesses is 3.0 W/m2K.
Fire PerformanceKS1000 RW/GRP roofl ights comply
with National Building Regulations and Norms.
Light Transmission
Seals and FillersSide Lap Sealant (Site Applied)
All external side laps to be sealed with 4 mm
diameter butyl rubber sealant tape.
All internal side laps to be sealed with a site
applied silicon sealant.
Dimensions & Weight
Product Data 22 666444 22
KS1000 RW/GRP approximately 70%
and are opaque
Length ±10 mm
Width ±3 mm
Thickness ±2 mm
End Square ±10 mm
1 000 mm - modular width
333,3 mm 333,3 mm 333,3 mm
Panel thickness 50 60 70 80 100
Weight (kg/m2) 3,70
KS
1000
RW
/GR
P
26 Kingspan Daylighting Systems
Packing
Standard packing - road transportation
KS1000 RW panels are stacked weather
side to weather side (to minimise palette
height).The top, bottom, sides and ends
are protected with foam and timber packing
and the entire palette is wraped in plastic.
The number of panels in each pack depends
on panel thickness and length.The table
below is shown as a guide. Quantities are
reduced for exceptionahy long panels.
Typical palette height is 1,100 mm.
Delivery
All deliveries (unless indicated otherwise)
are by road transport to project site.
Off loading is the responsibility of the client.
InstallationSite assembly instructions are available
from Kingspan.
Kingspan will arrange training of the site fi tters
and supervisors if requested.
Safety
The contractor is to determine and use a safe system
of working throughout the installation and construction
period which complies with the HSA or HSE and CDM
requirements. Crawling boards should be used when
fi xing roofl ights.
NOTEIn the interest of safety, you should never walk on a roofl ight no matter what grade or construction it may be.K
S10
00 R
W/G
RP
Panel core thickness (mm) 40 50 60 70 80 100
Number of panels in package 17 15 13 11 9 7
27Let the Sunshine in and brighten your building
Construction details
Butyl sealing tape or PVC
sealing tape (site applied)
Roof purlin Anti-condensation tape
(site applied)
Side lap stiching screw
(at 300-500 mm) - P03
Sealing tape (P17)
Self-tapping or self-drilling screw
with thread under head
and sealing washer Ø29 - P02p
RWRW/GRP
ModuleModule
d
RW RW/GRP
Self-tapping or self-drilling screw
with thread under head and sealing washer Ø29
Sealing tape (P17) Roof purlinAnti-condensation tape (site applied)
Butyl sealing tape or PVC
sealing tape (site applied)
Lap-Lox/Tramslap
stiching screw
(at 300-500 mm) - P27
LD
d
Module Module
Side LapsRW/GRP to KS1000 RW panel
Side LapsKS1000 RW panel to RW/GRP
28 Kingspan Daylighting Systems
KS
1000
RW
/GR
P
Section A-A
Direction of prevailing wind Direction of lay
RW
P
50
50
a a
18
P
17
P
04p
P
04
P
27
P
34
P
A
A
RW/GRP
or permanently
elastic sealant
9 fasteners
per end lap
PE profiled sealing filler
(factory applied)
Note:
a - according to structural/static requirements
P - cut back dimension 250 mm
Section A-A
Direction of prevailing wind Direction of lay
End Lap DetailUpslope - KS1000 RW panel to RW/GRP
Fastener Locations RW / GRP
29Let the Sunshine in and brighten your building
Construction details
03p
P
02p
P
01
P
34
P
18
P
17
P
RW
50
50
a a
P
RW/GRP
B
B
9 fasteners
per end lap
or permanently
elastic sealant
PE profiled
sealing filler
(factory applied)
lub
Note:
a - according to structural/static requirements
P - cut back dimension 250 mm
Direction of prevailing wind
Section B-B
Direction of lay
End Lap DetailDownslope - RW/GRP to KS1000 RW panel
Fastener Locations RW/GRP
30 Kingspan Daylighting Systems
IntroductionThe Kingspan Wall-Lite is a translucent wall
panel that allows natural daylight into buildings,
whilst maintaining thermal effi ciency and aesthetic
appearance.
This can help to lower both energy bills and CO2
emissions, whilst allowing occupants to enjoy
high levels of daylight. The system is suitable for
use as an alternative to traditional vertical daylight-
ing systems and need not restrict design options
as it integrates fully, with Kingspan’s range of
Architectural Wall panels, Kingspan OptimoTM,
and Kingspan’s range of complete wall and
façade systems including the ThermabrickTM,
Thermastone and Thermatile systems.
The Kingspan Wall-Lite is UV resistant,
lightweight and offers a U-value of 1.26 W/m2K
offering designers and installers choice of freedom
to create energy effi cient buildings of distinction.
KS1000 Wall-LiteNatural Light Architectural
Translucent System
APPLICATION ALL TYPES OF BUILDINGS
THERMAL RESISTANCE U = 1.26 W/m2K
LIGHT TRANSMISSION UP TO 55%
The Kingspan Wall-Lite offers excellent interior
levels of natural light without compromising
the performance of the building.
The Kingspan
Wall-Lite panel
31Let the Sunshine in and brighten your building
ApplicationKingspan Wall-Lite is suitable for applications
on all types of buildings and is suitable for
both vertical and horizontal applications.
It is a single component system and does
not require glazing experience to fi t,
thereby reducing installation times and
the need to rely on skilled sub-contractors.
System Benefi ts U-value 1.26 W/m2K
Excellent light transmission - up to 55%
to EN410.
Up to 25 years life expectancy.
Fully recyclable at end of life with
minimal impact on the environment.
Factory manufactured: ensures
excellent fi t with all Kingspan
Architectural Wall Panel and Optimo™
systems.
Available in a range of colours.
High degree of colour fastness
over guaranteed period.
Available in lengths from 1.8m up to 8m.
Fire properties: Class 1Y to BS 476 Part 7.
Single component: fast installation
leading to accelerated build speed.
Simple to fi x and no glazing
experience necessary.
Lightweight and durable.
Excellent impact and thermal
performance compared to glass
glazing systems.
Factory fi tted aluminium spacers
to facilitate faster installation
and reduce site wastage.
Manufacturing sites are ISO 9001:2008
(Quality) and ISO 14001 (Environmental)
accredited.
32 Kingspan Daylighting Systems
Available LengthsStandard length of panels is from 1,0 m to 6,0 m.
Dimensions & Weight
Product Tolerances
Thermal PerformanceThe thermal insulation (U value) for KS1000 WL
is 1.26 W/m2K.
Fire PerformanceFor detailed information please contact local
Kingspan Technical Department.
Light Transmission
Seals and FillersKS1000 WL is fi tted with PVC sealing tape on side
laps (factory applied) and anti-condenstation tape
on panel end laps (applied on site).
Product Data22 6666444 222
Cut to Length:
Panels up to 6 m ±4 mm
Panels from 6 to 12 m ±6 mm
Panels longer than 12 m ±8 mm
Panel Width ±3 mm
Panel Thickness:
Thickness d ≤ 50 mm ±2 mm
Thickness 50 mm < d < 100 mm +3 mm −2 mm
Thickness d ≥ 100 mm +3 mm −3 mm
Right angle cut end tolerance max. 5 mm
Panel bow (Δ1 + Δ2) / 2 ≤ 10 mm
D – core thickness [mm] 38
Weight [kg/m²] 4,7
KS1000 WLapproximately 55%
and are opaque
KS
1000
Wall-
Lite
33Let the Sunshine in and brighten your building
Packing
Standard Packing
KS1000 WL panels are packed in the stacks
on wooden pallets. The top, bottom, sides
and ends are protected with polystyrene
spacers and the whole package is wrapped
with foil.
Delivery
Road Freight
All deliveries (unless indicated otherwise) are
by road transport to project site. Unloading
is the responsibility of the customer.
InstallationInstallation instructions are available in Kingspan
Technical Department. We also provide, on request,
trainings for contractors.
Colour Range
Kingspan Wall-Lite is available in a range of colours to give designers choice and freedom.
Safety
The maximum spacing of supports for WL
panels installed as a single band highlight is 6 m.
Maximum spacing for WL panels installed
in series is 3 m.
BUILDING REGULATIONSKS1000 WL panels meet the requirements
of national building standards
and regulations.
Infra-red (IR) Absorbing LightsThis range of Kingspan Wall-Lites absorb
greater levels of infra-red light which
reduces solar gain. These can allow for
greater control of ambient temperature
within the building providing a possible
reduction in HVAC usage.
Clear Opal Blue Green
Purple Red Orange Yellow
IR Green IR Blue
*The only Standard color is Clear. If you need other colors, please contact Kingspan fi rst.
ClCl
PP ll
OO ll
R dR d
BlBl
OO
IR G
GG
YY llll
IR Bl
34 Kingspan Daylighting Systems
Spacing profi les
Available options for the junction Wall-Lite to AWP panel
KS1000 WLThickness
Spacer profi lesHight
KS1000 AWP Thickness
38 mm 60,5 mm 100 mm
38 mm 40,5 mm 80 mm
38 mm 30,5 mm 70 mm
38 mm 20,5 mm 60 mm
KS
1000
Wall-
Lite
40
60,5
60
40,5
80
30,5
20,5
80
40,5
40
40
30,5
50
20,5
60
60,5
WL100PD_A WL100PD_B
Aluminium Spacer Profiles
Joint Detail
WL080PD_A WL080PD_B
WL070PD_A WL070PD_B WL060PD_A WL060PD_B
male jointfemale joint
factory applied sealant
35Let the Sunshine in and brighten your building
KS1000 AWP 100a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)
KS1000 AWP 80a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)
KS1000 AWP 70a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)
KS1000 AWP 60a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)
KS1000 WLScheme of the junction Wall-Lite to AWP panel using aluminum spacing profi les (type A or B)
36 Kingspan Daylighting Systems
Wall-Lite Male Joint
Steel support
KS1000 AWP architectural wall panel horizontally laid
Factory applied weather seal
Concealed stainless steel fastener (min. 2 at intermediate supports)
Factory fitted aluminium spacer A
KS1000 WL horizontally laid
PVC barrier tape neatly applied between aluminium spacer andKingspan Multibeam cladding rail to prevent bi-metallic corrosion
Wall-Lite Female Joint
Steel support
KS1000 AWP architectural wall panel horizontally laid
PVC barrier tape neatly applied between aluminium spacer andKingspan Multibeam cladding rail to prevent bi-metallic corrosion
KS1000 WL horizontally laid
Factory fitted aluminium spacer A
Factory applied weather seal
Concealed stainless steel fastener (min. 2 at intermediate supports)
Construction details
KS
1000
Wall-
Lite
37Let the Sunshine in and brighten your building
Wall Abutment
Vertical Joint - Tophat Option A
Note: A vertically laid option is available from Kingspan enviro care® Technical Services on 0800 587 0090.
*Always ensure only polycarbonate compatible gun grade sealant is applied to Kingspan Wall-Lite.
KS1000 WL horizontally laid
Wall-Lite aluminium spacer
Stainless steel fastener
White profiled filler pushed between sheetingrail and bubble gasket after Wall-Lite is fixed in
place (fits between extruded aluminium spacers
Panel joint rail
Cladding rail
AWP joint filler and gun gradesealant sealed top and bottom*
‘Snap on’ receiver flashing
6mm dia. run of gun grade sealant*
4mm dia. butyl rubber sealant site applied
PIR board insulation site applied
KS1000 WV architectural wallpanel horizontally laid
Air seal - EPDM bubble gasket95x10mm.
Min. steel bearing face 130mm
Air seal - 6mm dia. bead of gun grade sealant*
Air seal - gun grade sealant to male joint*
Air seal - gun grade sealant to male joint
PVC barrier tape neatlyapplied between aluminiumspacer and cladding rail toprevent bi-metallic corrosion
Stainless steel fastener
Abutment flashing
Polyethylene backing rodwith silicone sealant
Air seal - 6mm dia. bead ofgun grade sealant
Wall-Lite aluminium spacer
4mm dia. butyl rubber sealant site applied
6mm dia. run of gun grade sealant*Bulb-Tite rivet @ 450mm centres to fix flashing toWall-Lite with optional coloured cap
KS1000 WL horizontally laid
White profiled filler bedded ingun grade sealant*
Internal closure flashing with 100mmoverlapped and air sealed joints
AWP joint filler and gun grade sealantsealed top and bottom*
‘Snap on’ cover flashing oroptional recessed cover flashing
38 Kingspan Daylighting Systems
Horizontal Wall-Lite Junction with Verge
Air seal - 8mm dia. butyl rubber sealant
Air seal - 8mm dia. butyl rubber sealant
9mm x 3mm butyl rubber sealant
KS1000 RW insulated roof panel
Cleader angle
Galvanised steel pressing fixed to cleader angle
Apply film faced butyl tape to site rake cut
Face-fix @ max. 500mm centres
4mm dia. butyl rubber sealant
KS1000 WL horizontally laid
Panel joint rail
Concealed stainless steel fastener(min. 2 at intermediate supports
6mm dia. run of gun grade sealant*
Bulb-Tite rivet @ 450mm centres to fix flashingto Wall-Lite with optional coloured cap
Above Floor Level Drip Detail
KS1000 WL horizontally laid
Panel joint rail
Galvanised drip support angle
PIR board insulation
Apply PVC isolation tape betweenaluminium spacer and flashing
Panel bearer at ends of Wall-Lite@ max. 1500mm centres between
Optional internal closure flashing tomask insulation from view
PIR board insulation with fire-rated canisterapplied insulation used to fill gaps, if required
Kingspan drip flashing
Air seal - continuous bead of gun grade sealant
Air seal - 6mm dia. bead of gun grade sealant
*Always ensure only polycarbonate compatible gun grade sealant is applied to Kingspan Wall-Lite.
Construction details
KS
1000
Wall-
Lite
40 Kingspan Daylighting Systems
TUBULAR SKYLIGHTSSUNPIPE®
SUNIZERTM
APPLICATION ALL TYPES OF BUILDINGS
THERMAL RESISTANCE 0-30 DEGREE
LIGHT TRANSMISSION UP TO 98 %
SUNPIPE®
ApplicationThe SUNPIPE® is a revolutionary
new way to pipe natural daylight down from rooftop
into the building - to brighten areas from dawn
to dusk where daylight from windows cannot reach.
It is energy free, super refl ective tube even extends
through adjustable bends and has an internal mirror
fi nish that intensifi es and refl ects natural daylight
delivering free outdoor light to a room or area below
- where the light is evenly diffused by a translucent
ceiling fi xture. At ceiling level, the diffuser has the
ability to distribute the light in every direction, giving
an even spread of light throughout the room.
Sunpipes are supplied as complete system, with
roof aluminum insulated upstands and applicable
with Kingspan roof insulated panels. Due to the
shape of the Diamond dome, the SUNPIPE is self-
cleaning, since rainwater washes off any dust or dirt
and there are no crevices for dirt to collect.
System Benefi ts No structural alterations required, easily fi ts be-
tween joists and rafters.
No maintenance required and will not leak.
Top dome is self-cleaning due to its shape and
eliminates condensation problems.
All SUNPIPE® systems are guaranteed for 10
years against faulty manufacture.
Few fi xings are required, normal single fi xing at
base of system.
Joints are sealed using aluminium tape.
Refl ection effi ciency up to 98 %!
Investment payback – 5-6 years.
Applicable with Kingspan roof insulated panels.
A SUNPIPE can be almost any length
that you wish, but loses 6% of light for every
metre of SUNPIPE. For very long SUNPIPEs,
a larger diameter should be used
41Let the Sunshine in and brighten your building
ApplicationSUNIZER is absolutely unique structural
element distinguishing mainly for its utilization
purpose and its extremely high effi ciency.
Its uniqueness consists in using Fresnel lenses
which can affect the fi nal parameters very
favourably. Fresnel lenses multiply sunbeams
entering the system and then direct them
to the desired place.
Sunizer can be installed into both fl at
and pitched roofs. Suitable also for low-energy
buildings – the closed air column combined
with the thermal insulation around the tube acts
as an excellent insulating material.
System Benefi ts Brings healthy daylight into the interior.
Excellent light multiplication and dispersion
thanks to the Fresnel lenses
Helps to meet the norms for illumination
of buildings with daylight.
Easy instalation - perfect installation system
into the roofs (0 -30°).
Brings fi nancial savings for saved electrical
energy.
Up to 90% energy saving – during the day
Night service – by LED diodes
or fl uorescent lamp.
Product Data222 6644 22
21P
spád
AL insulated upstand
a a
5050
min. 300
d
min 500
polycarbonatehead
crystalline head
L
D
Al sheet with layer of pure silver
Length (L): minimum 300 mm
Loss of lightness: 6 % for every 1 m
SUNIZERTM Tubular Skylight
Type Diameter (D) Illuminated area
SP230 230 mm 7,0 m2
SP300 300 mm 14 m2
SP450 450 mm 22 m2
SP530 530 mm 40 m2
SP750 750 mm 50 m2
42 Kingspan Daylighting Systems
ROOF UPSTANDS
APPLICATION ALL TYPE OF BUILDINGS
ROOF PITCH 0,5 DEGREE OR ABOVE
FAST INSTALLATION SINGLE COMPONENT
Aluminum Products
ApplicationAlumnum products, which are very effective
and easy for installation with faultless functionality,
can highlight the originality of any building.
Primary material used is aluminium sheet
with fi nal comaxit coating. This guarantees
a high quality and life time of the parts as well
as a colour range according to the request
of a customer.
Aluminum Upstands allow trouble
free sealing for installation on the roof.
As a fi nal product it does not require any
other fi nishing works.
System Benefi ts High shape variability
Non standard shapes
Upstands for RW, FF, Top-dek and X-dek panels
Production to individual needs of a customer
Komaxit coating
Finished product, no other completion works
Insulated or non insulated
Optimal usage of Upstands is for RW panels
or for fl at roofs (TOP-DEK panels / X-dek),
alternatively according to the needs of a customer.
43Let the Sunshine in and brighten your building
It is possible to produce various dimensions
to fit the building, for Velux and Fenestra roof
windows.
Can optionally be equipped with units for
daily ventilation (pneumatical or electrical).
An automatic, weather-activated control helps
to ease the operation.
Available in different dimensions and can be
also fi tted with electromotor. Light transmis-
sion form 63 -73 %. Thermal insulation from
1,6 -2,7 W/(m²K).
For delivery possibilities please contact Kingspan Accessories department.
For delivery possibilities please contact
Kingspan Accessories department.
Upstands for roof windows
Fire Dampers
Dome roofl ights
78 × 98
78 × 118
78 × 140
78 × 160
window frame sizes:
100x100
100x200
120x120
150x150
Production sizes (size of hole in the
roof):
100x100
100x200
120x120
150x150
Production sizes (size of hole in the
roof):
44 Kingspan Daylighting Systems
Kingspan is a leader in the fi eld of sustainable development.
Our long-time commitment to the issues of sustainability and energy
effi ciency is best characterized by the Trias Energetica model,
which promotes three steps towards sustainable energy production:
Reduce use
Use renewables
Be effi cient with the remaining resources
2 Maximise the use
of renewable energy
sources
1 Reduce demand
(energy saving)
3 Use fossil fuels
in the cleanest
possible way
ENERGY DEMAND
STEP ONE
Energy Effi cient Buildings
The implementation of Energy Performance
of Buildings Directive has forced energy effi ciency
into the design and operation of residential,
commercial and industrial buildings. The EPBD
requires that all buildings are labelled to show
their energy effi ciency.
With closed-cell, high performance insulation
constituting and integral part of the panel systems,
the IPN-insulated panels provide a particularly thermally
effi cient and economic method of constructing walls and
roofs of buildings, and ensure an unrivalled thermal per-
formance throughout the building’s operational lifetime.
The simplest way to reduce energy demand
and assure an A rating for a building is to use
IPN-insulated panel systems.
Testing and fi eld results show that IPN-insulated
panels - Kingspan core product - contribute
to sustainability and energy effi ciency in a variety
of ways.
Energy effi ciency. Insulated panels have a core
of continuous, rigid insulation for industry leading
R- and U-values with superior airtightness
performance, thereby preventing unnecessary
heat transfer.
Recycled and recyclable. The exterior skins
contain a substantial amount of recycled content,
and the panels themselves are recyclable.
Life cycle benefi ts. Insulated panels last as long
as the service life of a typical commercial building,
and continue to provide excellent thermal performance
throughout the building’s operational lifetime, which
is a key requirement for any sustainable solution.
Energy
Effi ciency
Rating
45Let the Sunshine in and brighten your building
The development of sources of renewable energy is a crucial part of the strategy
to cut carbon emissions.
One of the key aspects for the success of integrating sources of renewable energy into
construction programmes is the ease with which they can be incorporated into building design.
Kingspan has a number of solutions which meet this criterion, starting with the building envelope itself.
Renewable Energy
Kingspan designs, manufactures and supplies approximately
20 million m2 of insulated roof, wall and façade panels per
annum and works in close conjunction with leading building
investors, owners, developers, designers and construction
teams for the property market.
This capability has enabled us to introduce a range of fully
integrated solar photovoltaic solutions for roofs, walls and
façades from a single, trusted provider, eliminating multi-
sourcing, installation and building envelope integration risks.
Photovoltaic (PV) systems generate clean, infl ation proof
electricity, reduce energy costs and can generate electricity
to be fed into the national grid or used within the building
itself. Even if the sky is overcast, PV is proven to produce
electricity.
Every kW produced has zero-carbon emissions,
which signifi cantly reduces the carbon footprint. It limits
dependency on fossil or nuclear fuels and facilitates meeting
corporate social responsibility needs. Such an investment
could increase the saleable / rentable value of the building
and would enhance the building’s energy ratings.
Kingspan EnergiPanel is an innovative insulated solar
air heating system designed for roof and wall applica-
tions as a supplement to the main heating system.
Profi led hollows beneath the crowns allow air move-
ment up through the panel and the air is warmed by
the simple process of using the outer steel skin as
a solar energy absorber. The darker the external colour
of the panel the greater the solar absorption.
Because it is a single component system, Kingspan
EnergiPanel allows fast track construction, so the over-
all carbon footprint associated with the instal lation is
minimised. The system integrates seamlessly with other
panel systems from the Kingspan range and is available
in a range of colours.
The Kingspan EnergiPanel combines Kingspan’s
existing state of the art insulated panel techno-
logy with a tested and proven solar air heating
capability.
The EnergiPanel Solar Air Heating System has
the fl exibility of being either integrated with the existing
HVAC system or utilised in a standalone heating capac-
ity. It is available with the Kingspan Total Guarantee
covering both the thermal and structural performance.
STEP TWO
46 Kingspan Daylighting Systems
The fi nal step is to be effi cient with our remaining resources – where fossil fuels have to make up
the shortfall in energy supply, this should be done as cleanly and as sparingly as possible.
The aim of safeguarding the natural resources has led Kingspan to develop a range of solutions that
instead of consuming fossil-depleting energy, capitalize on the most natural of resources – sunlight.
STEP THREE
Reduce demand
The simplest way to save the energy is just to turn off the
lights.
This vision has compelled Kingspan to introduce a range of
products that bring the natural light into the buildings, thus
reducing the need for artifi cial, energy-consuming lighting.
The Kingspan Polycarb Roofl ight is designed for use with
the KS1000 RW insulated panel system.
• Made from polycarbonate – a lightweight, high perform-
ance, durable plastic, which will not discolour over time.
• Provides excellent light transmission, which makes it
possible to fully exploit the benefi ts of natural light.
• Allows for effi cient light diffusion, which helps avoid
hot spots and disperse light evenly in sections between
roofl ights.
The economy of using the Kingspan Polycarb Roofl ights is
amplifi ed by savings on lifecycle costs – once installed, the
roofl ights do not require spare parts or vigilant maintenance.
The Kingspan Polycarb Roofl ight is 100% recyclable and has
a scrap value, potentially rendering the process of removing
and disposing of the panel at end of life cost neutral/positive.
Harvesting daylight…
We could reduce our demand for electricity by thou-
sands of megawatts just by opening up our buildings to
daylight – and the Kingspan Wall-Lite, a translucent wall
panel, does exactly that.
A novel concept in sandwich panel façades, the
Kingspan Wall-Lite presents designers with a freedom
to create energy effi cient buildings of distinction. It is
simple to fi x, light and durable, features superior light
transmission and diffusion combined with excellent
insulation properties.
The Kingspan Wall-Lite provides a brilliant alternative to
traditional vertical daylighting systems. It is suitable for
both horizontal and vertical application on all types of
buildings, and integrates fully with Kingspan Architec-
tural Wall panels, Kingspan OptimoTM, and Kingspan’s
range of complete wall and facade systems.
Fully recyclable, the Kingspan Wall-Lite helps lower
both energy operating costs and CO2 emissions, whilst
allowing the buildings’ occupants to enjoy and benefi t
from high levels of daylight.
Research has shown that increased levels of daylight can
aid health, facilitate learning and increase productivity.
Polycarb Roofl ight Wall-Lite
47Let the Sunshine in and brighten your building
Kingspan Insulated Panels is fully
committed to developing products
that are sustainable throughout their
lifecycle, from manufacture and
application to their disposal.
Kingspan continues to work with
BRE and leading waste management
companies to further quantify and
reduce the impact of its products.
Vision
Energy Effi cient Buildings
The research found that demolition results
in the insulation generally going to landfi ll – whether
it be PUR, PIR, rock fi bre or glass fi bre. In the light
of this conclusion, Kingspan Insulated Panels continues
to actively explore ways of stimulating the end-of-life
management of its panels, including an on-going
reduction in the environmental footprint of new
products to reduce the future legacy.
Kingspan Insulated Panels has adopted BRE’s
Environmental Profi les Assessment Methodology
to quantify the environmental impact of its panels.
Kingspan Insulated Panels is delighted that its
Architectural Wall Panel and Trapezoidal Roof and
Wall product range have all been reassessed under
the latest Green Guide to Specifi cation and achieved
‘A+’ ratings.
Roof Specifi cation*High Performing Specifi cations Poor Performing Specifi cations
A+ A B C D EBest Worst
Performing Performing
Roof Roof Specifi cations
Specifi cations
Wall Specifi cation†
High Performing Specifi cations Poor Performing Specifi cations
A+ A B C D EBest Worst
Performing Performing
Roof Roof Specifi cations
Specifi cations
Kingspan KS1000 RW 0.42 Ecopoints
Kingspan KS1000 RW 0.47 Ecopoints
KS600/900/1000 AWP 0.53 Ecopoints
Low Pitched Roof: KS1000 RW Panel with insulation core manufactured at Holywell. Supported on cold rolled steel purlins and structural sections. Steel facings; generic organic coatings. Insulation 120mm core thickness.
External Wall: KS1000 RW Panel with insulation core manu-factured at Holywell, vertically laid. Supported on cold rolled steel rails. Steel facings; generic organic coatings. Insulation 70mm core thickness. KS600/900/1000 AWP Panel with insulation core manufactured at Holywell, horizontally laid. Supported on cold rolled steel rails and struc-tural frame. Steel facings; generic organic coatings. Insulation 80mm core thickness.
Commercial Cradle to Grave Diagrams
Kingspan d.o.o. Jevrejska bb, 78000 Banjaluka, BiH
Tel: +387 51 226 190 Fax: +387 51 226 191
[email protected] www.kingspan.ba
Kingspan Insulated Roof, Wall & Facade Systems
IPN Core
Roof Systems
KS1000 RTRoofTile
KS1000 X-DEKFlat
KS1000 TOP-DEKFlat
KS1000 RWTrapezoidal
Mineral Fibre Core Roofl ights
KS1000 RW/GRPTrapezoidal
KS1000 FF/HTLTrapezoidal
KS1000 PCTrapezoidal
KS1000 RW/HTLTrapezoidal
KS1000 FFTrapezoidal
IPN Core
Architectural Wall Systems
Mineral Fibre Core
KS1000/1150/1200 FRThrough Fix
KS1000 WL Wall-Lite
KS1000 FHSecret Fix
KS1150 FA AcousticThrough Fix
KS1000 RWTrapezoidal
KS1150 TLThrough Fix
KS1000 AWPSecret Fix
KS1150 TFThrough Fix
Kingspan EnergiPanelSolar Air
Heating System
02-2012