king shotcrete equipment canadian parts catalogue · aliva shotcrete machines aliva al-252 the...

Supporting your complete shotcrete operation.

KING SHOTCRETE EQUIPMENT CANADIAN PARTS CATALOGUE

KING SHOTCRETE EQUIPMENT | CANADIAN PARTS CATALOGUE | 1 |

T A B L E O F C O N T E N T S

ALIVA SHOTCRETE MACHINES 3-5

PUTZMEISTER TK 20 CONCRETE PUMP 6

CCM 200 E CONTINUOUS MIXER 7

CHEMICAL & WATER BOOSTER PUMPS 8

DRY-MIX MACHINE PARTS 9-11

HYDRO-MIX NOZZLES (DRY PROCESS) 12-13

EXTENSION HOSES (DRY PROCESS) 14-15

CONCRETE PUMPING HOSES 16

SNAP COUPLINGS & GASKETS 17

REDUCERS (DRY & WET PROCESS) 18

WET-MIX NOZZLES 19

HOPPER HOOD 20

AIR-SEPARATOR BOX 21

SHOTCRETE CONSTRUCTION PANELS 22

FORM OIL 23

SHOTCRETE SUPPORT POSTS 24

END-BEAM TESTER 25

BULK BAGGED HANDLING PRODUCTS 26

DUST SUPRESSION PRODUCTS 27

SHOTCRETE HELMETS 28

ORDER FORM 29


A L I V A S H O T C R E T E M A C H I N E S

ALIVA AL-237

The Aliva AL-237 shotcrete machine is the ideal machine for small to mid-sized shotcrete applications. Based on the rotor size, the Aliva AL-237 has output capabilities ranging from 0.2 m3 to 4.0 m3 per hour. As such, this machine is ideal for applications such as concrete patchwork and restoration, swimming pool construction, joint filling, slope stabilization, and refractory work.

• The Aliva AL-237 Air Model allows for variable rotor speed, controlled by an air motor

• The Aliva AL-237 Standard Model has a fixed output (ON/OFF)

• The Aliva AL-237 Top Model allows for variable rotor speed, controlled by a Variable Frequency Drive (VFD)* *Electric Drive machines require compressed air for material conveyance

ROTOR SIZE HOSE DIAMETERCONVEYING OUTPUT

MAXIMUM AGGREGATE SIZE

0.7 Litre 32 mm 0.2-0.5 m3/hr 6 mm

2.0 Litre 32 mm or 38 mm 0.6-1.4 m3/hr 12 mm

3.6 Litre 38 mm 1.1-2.5 m3/hr 12 mm

5.6 Litre 50 mm 1.7-4.0 m3/hr 16 mm



ALIVA AL-252

The Aliva AL-252 shotcrete machine has been considered the work horse of the mining and tunneling industry for many years. With output ranging from 3.5 m3 to 11.0 m3 per hour, the Aliva AL-252 is ideally suited for high volume, dry-process shotcrete operations. This machine is most commonly used as a stand alone unit, but it can also be integrated into a bulk type shotcrete system when installed on mobile equipment and fed by a bulk hopper.

• The Aliva AL-252 Air Model allows for variable rotor speed, controlled by an air motor

• The Aliva AL-252 Standard Model has a fixed output (ON/OFF)

ROTOR SIZE HOSE DIAMETERCONVEYING OUTPUT

MAXIMUM AGGREGATE SIZE

10 Litre 50 mm 3.5-7.0 m3/hr 16 mm

16 Litre 60 mm 5.5-11.0 m3/hr 20 mm



ALIVA AL-101

The Aliva AL-101 is a Quick Connect, mountable spray head for your excavator. This spray head offers an extremely large and flexible range of applications thanks to its simple and rapid assembly on numerous different machines. Whether you are working on excavations, slope stabilization or tunneling, with the Aliva AL-101 spray head, you will always be prepared to apply shotcrete with your own equipment.

• Quick and easy to mount

• For dry and wet mixes

• Connected to excavator hydraulics

• Compatible with any standard quick-release system, rotary machine or concrete pump

• With concrete pump or rotary machine, spray head becomes self-sufficient concrete spraying system

• Variants: 12 VDC (5A), 24 VDC (5A), cable or radio remote control

WEIGHT IN KG

MAX. OUTPUT IN M3/H

HOSE SIZEHYDRAULIC

CONNECTIONHYDRAULIC OIL

PRESSUREHYDRAULIC OIL

FLOW

210 According to conveying machine

Max. DN 65 (6.4 cm/2.5” HD)

P/T = 2.6 cm (1”)

Min. 21 MPa (3045 psi) Max. 35 MPa (5076 psi)

Approx. 15 L/min (4 gl/min)


P U T Z M E I S T E R T K 2 0 C O N C R E T E P U M P

PERFORMANCE DATA

• Maximum Volume Output: 13 m3 (17 yd) per hour

• Maximum Concrete Pressure: 14 MPa (2,085 psi)

• Maximum Aggregate Size: 25 mm (1 inch)

TECHNICAL INFORMATION

• Variable Control: Yes

• Maximum Number of Strokes Per Minute: 28

• Hopper Height: 122 cm (48 inches)

DIMENSIONS

• Length: 375 cm (148 inches)

• Width: 162 cm (64 inches)

• Height: 157 cm (62 inches)

• Weight: 2,177 kg (4,800 lb)


C C M 2 0 0 E C O N T I N U O U S M I X E R

FEATURES AND BENEFITS

• Allows for continuous high-output production; 11 m3 (14.5 yd3) per hour, without interruption

• Large receiving hopper allows for 1,000 kg (2,205 lb) bulk bag capacity

• Exact control (calibrated) of water and material input ensures constant water-to-materials ratio

• Compact and cageable on a four-way steel skid mount, to allow for maneuverability in confined areas

• Removable mixing tube allows for easy cleaning of mixing chamber

• Low charging height of 1.6 m (5.25 ft) including protective hopper enclosure (optional), allows for maximum performance in constricted spaces

USES

For continuous mixing of a wide range of mixtures, including pre-blended, pre-packaged concrete, as well as wet or dry shotcrete and slurries.

OPTIMAL PERFORMANCE

Use of a water booster pump is recommended for applications where water pressue is expected to fluctuate.

PERFORMANCE DATA

Ouput of 11 m3 (14.5 yd3) per hour.

SPECIFICATIONS

• Length

Operating: 3,500 mm (138 inches)

Transport: 1,850 mm (73 inches)

• Width

Operating: 1,200 mm (47 inches)

Transport: 1,200 mm (47 inches)

• Height: 1,800 mm (71 inches)

• Power: 20 HP, 575/3/60

• Weight: 1,500 kg (3,300 lb)

• Mounting: Four-Way Steel Skid

• Water Control: Automatic

The CCM 200 E Continuous Mixer is a high quality, high capacity, easy to operate, concrete mixer with automatic water control, mounted on a four-way steel skid. This mixer addresses all of the technical and practical concerns associated with mixing high quality concrete in underground mining and remote applications.


C H E M I C A L & W A T E R B O O S T E R P U M P S

A-10 A-20

Maximum Output 0-95 L/hr (0-25 gl/hr) 0-454 L/hr (0-120 gl/hr)

Maximum Pressure 0.8 MPa (116 psi) 0.8 MPa (116 psi)

Power Air, Electric, or Hydraulic Air, Electric, or Hydraulic

Mounting Portable Stand Portable Stand

GBP-300 GBP-500

Maximum Output 40 L/min (10.6 gl/min) 76 L/min (20 gl/min)

Minimum Air Pressure 0.2 MPa (29 psi) 0.2 MPa (29 psi)

Maximum Air Consumption 2.27 m³/min (80.0 ft³/min) 2.27 m³/min (80.0 ft³/min)

Length 610 mm (24 inches) 610 mm (24 inches)

Width 330 mm (13 inches) 330 mm (13 inches)

Height 305 mm (12 inches) 305 mm (12 inches)

Weight 25 kg (56 lb) 25 kg (56 lb)

The A-10 Chemical/Accelerant Dosing Pump handles abrasive fluids with little wear and provides a high level of volumetric accuracy for sampling, transfer, and metering applications. The A-20 Chemical/Accelerant Dosing Pump has no valves or glands where crystals can build up or clog the pump. The absence of product slip in the hose provides 100 percent volumetric efficiency.

CHEMICAL/ACCELERANT PUMPS

WATER BOOSTER PUMPS

Air-driven water booster pumps, such as the GBP-300 and the GBP-500, work on a reciprocating differential area piston principle. The water pressure can vary from zero to 3.4 MPa (500 psi).

GBP 300 Water Booster Pump shown here


D R Y - M I X M A C H I N E P A R T S

Aliva OEM joint plates and rotor plates are constructed with the highest quality of rubber and high carbon steel, which allows for increased throughput and lower operating costs. Both the joint plates and rotor plates can be ground-down several times and then put back in operation. This process should be completed before the wear on the plates becomes too severe.

ALIVA AL-237/246

ALIVA AL-237/246 AIR OUTLET CHAMBERS

ALIVA AL-252

ALIVA AL-252 AIR OUTLET CHAMBER

PART # DESCRIPTION

246.2043 Lower Joint Plate

246.2047 Upper Joint Plate

246.0252 Rotor Plate

246.0254 Rotor Plate Gasket

PART # DESCRIPTION

246.0380 Air Outlet Chamber 38 mm (1½”)

246.0285 Air Outlet Chamber 50 mm (2”)

PART # DESCRIPTION

260.0233 Lower Joint Plate

260.0244 Upper Joint Plate

260.0237 Rotor Plate

PART # DESCRIPTION

252.0010 Air Outlet Chamber 60 mm (2⅜”)

250.0077 Outlet gasket

KING SHOTCRETE EQUIPMENT | CANADIAN PARTS CATALOGUE | 1 0 |

ALIVA AL-252 HOSE INSERTS

AIR MOTOR SILENCERS

ALLENTOWN MEYCO PICCOLA DISCHARGE LINERS

LUBRICATION HOSE FOR WEAR PADS

PART # DESCRIPTION

260.0506 Hose Insert 10 Litre

260.0526 Hose Insert 16 Litre

PART # DESCRIPTION

255.0023 Aliva AL-252

255.0025 Aliva AL-237/AL-246 & Piccola

PART # DESCRIPTION

A76033 Discharge Liner

A76034 Outlet Spout Liner 1½”

A76035 Outlet Spout Liner 1¼”

A76036 Outlet Spout Liner 1”

PART # DESCRIPTION

800.0093 Lubrication Hose

AIR PRESSURE GAUGE

PART # DESCRIPTION

150.0276 Pressure Gauge


ALLENTOWN MEYCO PICCOLA FRICTION DISCS

ALLENTOWN MEYCO PICCOLA PADS

ALIVA AL-246 & AL-252 SIEVE

KINK PROTECTOR & NOZZLE HOLDER

ALIVA AL-246 & AL-252 HOPPER VIBRATOR

ALIVA AL-252 AGITATOR & CABLE

PART # DESCRIPTION

A76136 Upper Wear Pad

A76140 Bottom Wear Pad

PART # DESCRIPTION

A76033 Friction Disc, 9 Hole Round

A76034 Friction Disc, 12 Hole Round

A76035 Friction Disc, 12 Hole Pie

PART # DESCRIPTION

838.0058 Vibrator

PART # DESCRIPTION

840.0099 Large Hole Sieve

PART # DESCRIPTION

252.0015 Agitator

246.0086 Wire Cable

PART # DESCRIPTION

220.0370 Kink Protector

220.2442 Nozzle Holder


H Y D R O - M I X N O Z Z L E S ( D R Y P R O C E S S )

The semi-wet, or hydro-mix, nozzle assembly was designed to increase mixing time after the introduction of water in the dry-mix process. This increase in time allows for more thorough mixing before the shotcrete exits the nozzle, and greatly reduces dust emissions from the nozzle tip.

ITEM PART # QUANTITY DESCRIPTION

Full assembly 220.1555 1 Full assembly

1 220.1561 1 Nozzle 38

2 220.1562 1 Hose Coupling w/Dist. 38

3 180.1819 16 Screw

4 170.0012 3 M 38/58 Material Hose

5 220.1563 1 Threaded Coupling

6 220.1566 1 Water Ring 38

7 220.1564 1 Water Inlet Piece

8 220.2774 1 Threaded Flange

9 170.0027 1 2½” Coupling

10 125.0342 2 O Ring

11 110.3688 1 Needle Valve

38/58 (1½”) INSIDE DIAMETER HOSE


50/70 (2’) INSIDE DIAMETER HOSE

60/80 (23/8”) INSIDE DIAMETER HOSELONG NOZZLES



1 220.1621 1 Nozzle 50


3 180.1819 16 Screw

4 170.0016 3 M 50/70 Material Hose


6 220.1625 1 Water Ring 50



9 170.0028 1 3” Coupling

10 125.0346 2 O Ring




1 220.1671 1 Nozzle 60


3 180.1819 16 Screw

4 170.0018 3 M 60/80 Material Hose


6 220.1675 1 Water Ring 60



9 170.0028 1 3” Coupling

10 125.0351 2 O Ring


PART # DESCRIPTION

220.1610 36” Nozzle 50/70 (2”)

820.1671 36” Nozzle 60/80 (2⅜”)


E X T E N S I O N H O S E S ( D R Y P R O C E S S )

King Shotcrete Equipment’s high quality mandrel-made, dry-process shotcrete hose is available in varying diameters and lengths. Our extension hoses are complete with a quick-connect, snap clamp for ease of assembly.


1 220.0041 2 Hose End 38

2 170.0012 0-20 38/58 (1½”) Material Hose

3 180.1819 16 Screw

4 170.0027 1 2½” Coupling

10 M Assembly 220.0045 1 Extension Hose Assembly 38/58 (1½”) x 10 M

20 M Assembly 220.0040 1 Extension Hose Assembly 38/58 (1½”) x 20 M

38/58 (1½”) INSIDE DIAMETER HOSE


50/70 (2”) INSIDE DIAMETER HOSE

10 M Assembly 220.0052 1 Extension Hose Assembly 50/70 (2”) x 10 M

20 M Assembly 220.0050 1 Extension Hose Assembly 50/70 (2”) x 20 M


1 220.0051 2 Hose End 50

2 170.0016 0-20 50/70 (2”) Material Hose

3 180.1819 16 Screw

4 170.0028 1 3” Coupling


1 220.0061 2 Hose End 60

2 170.0018 0-20 60/80 (2⅜”) Material Hose

3 180.1819 16 Screw

4 170.0028 1 3” Coupling

10 M Assembly 220.0062 1 Extension Hose Assembly 60/80 (2⅜”) x 10 M

20 M Assembly 220.0060 1 Extension Hose Assembly 60/80 (2⅜”) x 20 M

60/80 (23/8”) INSIDE DIAMETER HOSE


C O N C R E T E P U M P I N G H O S E S

King Shotcrete Equipment’s wet-process, concrete placement hose is available in fabric or steel-braid construction, and with inside diameters ranging from 1½” (38 mm) to 5” (127 mm). Each inner liner is made of natural rubber, and the outer cover is made up of a combination of natural and synthetic rubber that provides superior protection against the elements.

INSIDE DIAMETER

OUTSIDE DIAMETER

NUMBER OF PLIES

WORKING PRESSURE

BURST PRESSURE WEIGHT

1½” (38 mm) 2.20” (56 mm) 4 1,000 psi (6.9 MPa) 2,400 psi (16.5 MPa) 1.05 lb/ft (1.56 kg/m)

2” (51 mm) 2.76” (70 mm) 4 1,000 psi (6.9 MPa) 2,400 psi (16.5 MPa) 1.39 lb/ft (2.07 kg/m)






INSIDE DIAMETER

OUTSIDE DIAMETER

NUMBER OF PLIES

WORKING PRESSURE

BURST PRESSURE WEIGHT






FABRIC BRAID HOSE

STEEL BRAID HOSE


S N A P C O U P L I N G S & G A S K E T S

DESCRIPTIONCOMPLETE PART #

GASKET PART #

2½” (64 mm) 170.0027 170.0041

3” (76 mm) 170.0028 170.0042

4” (102 mm) 170.0029 170.0043

DESCRIPTIONCOMPLETE PART #

GASKET PART #

1½” (38 mm) A23730 A23731

2” (51 mm) A23138 A23139

2½” (64 mm) A23195 A23196

3” (76 mm) A23140 A23141

4” (102 mm) A23142 A23143

5” (127 mm) A23144 A23145

DRY PROCESS COUPLINGS

WET PROCESS COUPLINGS

King Shotcrete Equipment supplies various styles and sizes of quick-connect snap couplings and gaskets, for both wet and dry shotcrete processes. Our inventory includes grooved and heavy-duty style clamps and fittings.


R E D U C E R S ( D R Y & W E T P R O C E S S )

DESCRIPTION MACHINE PART #

Reducer 50/38 (2”/1½”) AL-246.5 220.0201

Reducer 60/50 (2⅜/2”) AL-252.1 252.0053

Reducer 75/60 (3”/2⅜”) AL-262/263/285 220.0283

DESCRIPTION GASKET PART #

2” x 1½” x 18” (51 mm x 38 mm x 457 mm) HD A23679

2½” x 2” x 28” (64 mm x 51 mm x 711 mm) HD A23328

3” x 2” x 90° Elbow (76 mm x 51 mm x 90°) HD A23793

3” x 2” x 36” (76 mm x 51 mm x 914 mm) HD A23100

3” x 2½” x 12” (76 mm x 64 mm x 305 mm) HD A23851

3” x 2½” x 28” (76 mm x 64 mm x 711 mm) HD A23207


4” x 3” x 36” (102 mm x 76 mm x 914 mm) HD A23200


5” x 4” x 36” (127 mm x 102 mm x 914 mm) HD A23682


W E T - M I X N O Z Z L E S

King Shotcrete Equipment carries a wide variety of wet-process nozzles for applications ranging from handheld spraying to the use of remote spray arms. Each nozzle type is available with or without an accelerator inlet, to cater to various applications.

PART # DESCRIPTION

A23348 1½” (38 mm) Shotcrete Nozzle with Accelerator Valve

A23349 1½” (38 mm) Shotcrete Nozzle without Accelerator Valve

A23725 2” (51 mm) Shotcrete Nozzle without Accelerator Valve

A23729 2” (51 mm) Shotcrete Nozzle with Accelerator Valve

ACME NOZZLE ASSEMBLY

PART # DESCRIPTION

A76016 2” (51 mm) HP Nozzle Assembly

A76019 2½” (64 mm) HP Nozzle Assembly

HP NOZZLE ASSEMBLY


H O P P E R H O O D

King Shotcrete Equipment’s enclosed hopper hood was developed to serve various purposes. First and foremost, it allows the machine operator to safely open the discharge chute on bulk bags, without lowering the bulk bag on to the lip of the hopper. By opening the access door on the side of the hopper hood, the operator can safely and effectively untie the bags without risk of injury.

Another benefit of the enclosed hopper hood is dust control. Incorporated into the design, is a round hole that is the same diameter as the discharge chute on the bag. This feature allows the chute of the bulk bag to plug the hole in the hood, and prevents dust from escaping from the hopper.

The enclosed hopper hood is available in steel or aluminum, and is designed to fit Aliva AL-237, Aliva AL-246, and Aliva AL-252 machines. Custom hoods for other models are available upon request.


A I R - S E P A R A T O R B O X

The purpose of an air-separator box is to allow for concrete to be mixed and placed using a conventional shotcrete machine. The problem with using a standard type shotcrete nozzle to pour a slab or floor, is that the material impacts the surface at a high velocity. As a result of this velocity, aggregate will not adhere to the surface until a layer of paste has built-up. This type of rebound can create pockets of aggregate that exist without cement, which causes voids within the concrete.

An air-separator box is designed to stop the material from impacting the surface with any substantial velocity. The box is lined with thick rubber to reduce wear and decrease velocity. The air-separator box is also equipped with a vent on the top, to allow the conveyance air to escape without pushing the material out of the bottom of the box.


S H O T C R E T E C O N S T R U C T I O N P A N E L S

King Shotcrete Equipment shotcrete construction panels are widely used for underground shotcrete construction work. Typical applications include the creation of ventilation barricades, refuge station walls, fuel bay contaminate dikes, backfill barricades, ore and waste-pass bumper walls and powder magazines. By eliminating the need for framework, King Shotcrete Equipment shotcrete construction panels reduce direct material, labour, and material handling costs.

Our panels are made up of five inner trusses of 6 gauge wire, and two full sheets of 9 gauge mesh. The end result is a superior panel, with large openings to facilitate placing on anchor pins. The panels also have a wide enough grid to reduce the amount of rebound that is associated with other panels.

King Shotcrete Equipment shotcrete construction panels are available in standard 4’ (1.2 m) x 8’ (2.4 m) sheets, in various thicknesses ranging from 2” (5 cm) to 8” (23 cm), and can be supplied with or without fabrene backing.


F O R M O I L & C O N C R E T E P U M P I N G A I D

The Innoltek FORM-TEK agent was designed to combine the performance of traditional petroleum-based products with greener characteristics. We believe that the new generation of industrial products must be respectful of the environment and can also exceed the expectations of our customers.

FORM-TEK is a biodegradable form release agent that is made from 100% renewable products, and is specially formulated to be used at low temperatures. This product is also water soluble, making it easy to clean. This form release agent is non-toxic, contains no solvents or VOCs, can be used on structures near water, and is safe for workers to use.


S H O T C R E T E S U P P O R T P O S T S

King Shotcrete Equipment shotcrete support posts are prefabricated concrete posts designed to take the place of pillars that are shot-in-place using conventional methods. The posts are designed as a quick and effective method for installing support in large excavations underground. They are commonly used in the cut-and-fill mining method, and take the place of ore pillars that are costly to leave in place.

Each shotcrete support post is available with a rebar strain meter cast into the middle of the post. This feature allows for the user to monitor the load applied to the pillar.


E N D - B E A M T E S T E R

The end-beam testing apparatus measures the early age, compressive strength of institu concrete or shotcrete. Particularly in mining and tunneling operations, it is important to know the strength of material at early ages. These compressive strength values cannot be obtained through traditional methods such as shooting a panel and retrieving cores, because cores are difficult to extract at an early age and it is not recommended to core a shotcrete panel before a strength of 10 MPa (1,450 psi) has been achieved.

The key to the end-beam test method is the use of molds that can be disassembled for quick and easy extraction at any strength. The test is an adaptation of the ASTM C 116, “Standard Test Method for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure”. The King Shotcrete Equipment End-Beam Tester allows users to obtain quick, easy, and accurate early age strength readings for shotcrete and concrete.


B U L K B A G G E D H A N D L I N G P R O D U C T S

LIFTING CROSS

Used in conjunction with a jib boom, overhead crane or other type of hoist, the lifting cross allows for quick attachment of KING’s 1,000 kg (2,205 lb) bulk bags to the lifting device. Due to its design, which utilizes a round bar where the straps are connected, it greatly reduces the chance of straps getting ripped or damaged. This job boom is a smart alternative to using chains or placing directly on to the forks of a forklift.

JIB BOOM

Designed for specific types of forklifts, the jib boom allows shotcrete bags to be lifted higher in areas with low, overhead height. By mounting the jib boom on to the mast of the forklift at an upward angle, this device allows bags to be lifted considerably higher than when simply using forks alone.


D U S T S U P R E S S I O N P R O D U C T S

This nozzle combines compressed air and water, to create a mist through each of its nine nozzles. The mist travels with the mine or tunnel ventilation system, capturing airborne dust particles in water droplets, causing the particles to be brought to the ground with the water droplets.

TERRAMIN TERRABLAST 9X8 CLUSTER NOZZLE

MODEL Terrablast 9×8 Cluster Nozzle

MATERIAL Black PVC Frame Retardant Anti-Static (FRAS)

NOZZLE SIZE 9 x 8 mm (0.31″) Cluster

DIMENSIONS 20 cm (8.0″) x 50 cm (19.7″)

MASS 4.7 kg (10.4 lb)

TERRAMIN TERRABLAST WATER ATOMISER

MODEL Single Blast (AM082)

MATERIAL Black PE Housing (FRAS)

NOZZLE SIZE 8 mm (0.31”)

DIMENSIONS 51 cm (20”) length x 20 cm (8”) diameter

MASS 3.2 kg (7 lb)

KING FABRICATING SPRAY BAR

Designed with an arch shape for large openings, the aluminum spray bar has eight spray tips to create a mist across large openings.

This atomiser works by combining compressed air and water to create small water droplets that travel with the mine ventilation system, capturing airborne dust particles and causing them to fall with the water droplet. The air and water are adjusted until the optimum water atomisation OCCURS. This piece of equipment is set-up in locations where dust is commonly emitted, allowing for dust control at its source.


S H O T C R E T E H E L M E T S

These shotcrete helmets are fully NIOSH Approved respiratory protection and conform to both ANSI and European Standards for head protection. They provide full mobility, safety and comfort. Additionally, they have a built-in, rechargeable, battery-powered fans and replaceable filters.

The fully enclosed helmet provides benefits beyond the half mask respirator. It provides fresh air supplied by a built-in fan and powered by re-chargeable batteries also built into the helmet. The visor provides eye protection with a wide range of vision and tear-off lenses for ease of cleaning.

PART # DESCRIPTION

M5000 Complete Helmet (including battery charger)

M5001 HEPA Filter

M5002 Fixed Visor/Shield

M5003 Nylon Neck Collar

M5005 Tear-Off Visor (individual)

M5006 Tear-Off Visor (pack of 100)

M5007 Replacement Fan

M5012 Battery Charger

M5014 Replacement Battery


O R D E R F O R M

KING SHOTCRETE EQUIPMENT 644 Simmons Rd. P.O. Box 938 Dowling, ON P0M 1R0 Canada To order parts, simply fill out the attached form and fax it to 1(705)855-1122 or e-mail it to [email protected]. Bill to: Ship to: Shipping Instructions: Preferred Carrier: Account Number: Pre-Pay and Charge: Special Instructions:

QTY PART # DESCRIPTION PRICE

TOTAL Notes or Comments:

Sudbury Office644 Simmons Rd. Dowling, ONP0M 1R0Phone: (705) 855-1155Fax: (705) 855-1122

Supporting your complete shotcrete operation.

K I N G S H OT C R E T E E Q U I P M E N T

www.kingshotcrete-equip.com/can • [email protected]

king shotcrete equipment canadian parts catalogue · aliva shotcrete machines aliva al-252 the...

Documents