kieralon wash tx 1586_ti

4

Click here to load reader

Upload: muhammad-aasim-hassan

Post on 29-Nov-2014

168 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Kieralon Wash TX 1586_TI

Technical Information TI/T Pretreatment December 2010 Page 1 of 4

® = Registered trademark of BASF Aktiengesellschaft Kieralon® Wash TX 1586

APEO-free, multifunctional, low-foaming wetting agent and detergent with emulsifying and extractive action for mobilizing and removing cotton impurities in pretreatment processes.

Page 2: Kieralon Wash TX 1586_TI

TI/T Pretreatment December 2010 Page 2 of 4 Kieralon® Wash TX 1586

Chemical Nature Mixture of sequestering agent and surfactants.

Physical form Colorless to slightly yellowish.

Shelf Life Kieralon® Wash TX 1586 can be kept in the original sealed containers at temperatures between 5°C and 45°C for at least 12 months. Once containers have been opened, the contents should be used up quickly. Containers should be closed tightly after use.

Properties

Viscosity Approximately 20 sec flow time (20 °C)

Density Approximately 1.01 g/cm3 at 20°C.

Solubility Soluble in cold water.

Action Removes oily and greasy impurities and solubilizes soil particles. Results in a good absorbency

Application Kieralon® Wash TX 1586 is a multifunctional low foaming wetting agent and detergent. Kieralon® Wash TX 1586 is a versatile product and can be used in both exhaust and continuous processes.

Recipes

Notes on formulating liquors:

Kieralon® Wash TX 1586 should be stirred when adding into the liquor.

Guideline recipe for Exhaust Process (Discontinuous Process ) Caustic Soda 48 oBe 2 - 4 g/l Kieralon® Wash TX 1586 0.5 - 1 g/l Hydrogen Peroxide 50% 2 - 5 g/l

Lufibrol® FF-SAB 0.5 - 1 g/l

Prestogen® F-PL 0.3 - 1 g/l

Bleaching for cotton

L:R : 1:10 Temperature: 95-110 °C Time: 30-45 min

Page 3: Kieralon Wash TX 1586_TI

TI/T Pretreatment December 2010 Page 3 of 4 Kieralon® Wash TX 1586

Guideline recipe for Continuous Process

Desizing Luzyme® HP 0.5 - 2 g/l Kieralon® Wash TX 1586 1 - 4 g/l

Lufibrol® FF-SAB 0.5 - 1 g/l

pH of the bath: 6 - 7 Temperature: 60 -70 oC Dwell Time 6 - 8 hours

Scouring Caustic Soda 48 oBe 25 - 45 ml/kg Kieralon® Wash TX 1586 2 - 4 ml/kg

Impregnation temperature: Room temperature Liquor pick-up: approx. 100% for Cotton approx. 70 - 80% for PES/Co Steaming temperature: approx. 100 °C Steaming time: 15 - 30 min

Bleaching Hydrogen Peroxide 50% 15 - 30 ml/kg NaOH 100% 10 - 25 ml/kg Prestogen® F-PL 5 - 9 ml/kg Kieralon® Wash TX 1586

Lufibrol ® FF-SAB 2 - 4

0.5 - 1 ml/kg ml/kg

Impregnation temperature: Room temperature Liquor pick-up: approx. 100% for Co approx. 70 - 80% for PES/Co Steaming temperature: approx. 100 °C Steaming time: 18 - 30 min

Page 4: Kieralon Wash TX 1586_TI

TI/T Pretreatment December 2010 Page 4 of 4 Kieralon® Wash TX 1586

BASF Pakistan Private Limited 46-A Block 6 PECHS 75400 Karachi, Pakistan www.basf.com/textile

Safety When using this product, the information and advice given in our

Safety Data Sheet should be observed. Due attention should also be given to the precautions necessary for handling chemicals.

Note The data contained in this publication are based on our current

knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. Responsibility for compliance with textile dealers’ requirements rests with the textile processor.

December 2010