ki-262-sma-ii trapezoidal 12”...

KI-262-SMA-II TRAPEZOIDAL 12” 2-WAY

The KI-262-SMA-II two-way trapezoidal loudspeaker is ideally suited

for applications where small size uniform power response and ease of

installation contribute to a quality sound solution. The Tractrix® Horn-

loaded KI-262-SMA-II is recommended for use in theaters, auditoriums,

clubs, churches, and A/V production environments.

Able to hang using 12 built-in 3/8” 16-thread fly points the

KI-262-SMA-II provides the coverage control, fidelity, and reliability

expected of Klipsch professional loudspeakers. The plywood enclosure

uses dado “lock-joint” and rabbet construction techniques on CNC-

fabricated panels for long-term reliability and ruggedness.

1 3M, Half-space anechoic2 AES standard, continuous pink noise, 6dB peaks3 Calculated at 1M half-spaced at power handling power input4 SPL at 1M, half-spaced anechoic with 2.83 volts input

3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM/PROAll specifications are subject to change without notice. ©2015 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation.

Compact 22.5º symmetrical trapezoidal design two-way speaker12” (30.48cm) woofer and

1.75” (4.4cm) titanium diaphragm HF compression driver

60º x 40º Tractrix® Horn for tight pattern control

Internal high current full-range crossover 16 suspension points

KLIP-circuit HF driver protection devices

Black, White or Raw finish

SPECIFICATIONSFREQUENCY RESPONSE1 71Hz-20kHz +/- 3dB -10dB @ 57Hz

POWER HANDLING2 300 watts (35V) (1200 watts peak)

CALC. MAX. CONT. OUTPUT3 121dB (127dB peak)

SENSITIVITY4 100dB

COVERAGE Horizontal 60° +/-15 2kHz-20kHzVertical 40° +/-20 4kHz-20kHz

DI 12dB+/-4dB 2kHz-20kHz

Q 18

NOMINAL IMPEDANCE 8 ohms, minimum 4.1 ohms @ 152Hz

OVERLOAD PROTECTION KLIP Overload Protection Circuit-HF

CROSSOVER FREQUENCY 900Hz

COMPONENTS One K-281-EP 12” woofer

One K-70-G 1.75” titanium compression driver on a K-604 horn

INPUT CONNECTORS Two point barrier strip

MOUNTING OPTIONS Sixteen 3/8”-16 flypoints

ENCLOSURE MATERIAL3/4" 7-ply birch plywood cabinet 1" MDF motorboard

HEIGHT 23" (58.42cm)

WIDTH17” (43.18cm) Front6.8” (17.27cm) Rear

DEPTH 12.6” (32.03cm)

WEIGHT 49 lbs. (22.27kg)

FINISHES Black, White and Raw


-30

-24

-18

-12

-6

0

6

12

20 32 50 80 127

202

320

508

806

1280

2032

3225

5120

8127

1290

2

2048

0

dB

Frequency

Vertical Off Axis - DOWN

0-10-20-30-40

-30

-24

-18

-12

-6

0

6

12

20 32 50 80 127

202

320

508

806

1280

2032

3225

5120

8127

1290

2

2048

0

dB

Frequency

Vertical Off Axis - UP

010203040

-30

-24

-18

-12

-6

0

6

12

20 32 50 80 127

202

320

508

806

1280

2032

3225

5120

8127

1290

2

2048

0

dB

Frequency

Horizontal Off Axis

0-10-20-30-40

0

2

4

6

8

10

12

14

16

18

20

20 32 50 80 127

202

320

508

806

1280

2032

3225

5120

8127

1290

2

2048

0

dB

Frequency

Directivity Index

0

45

90

135

180

225

270

315

360

20 32 50 80 127

202

320

508

806

1280

2032

3225

5120

8127

1290

2

2048

0

Cov

erag

e A

ngle

Frequency

Vertical Coverage (-6 dB)

0

45

90

135

180

225

270

315

360

20 32 50 80 127

202

320

508

806

1280

2032

3225

5120

8127

1290

2

2048

0

Cov

erag

e A

ngle

Frequency

Horizontal Coverage (-6 dB)

Higher Data = KPT-1200 std mule 3M

Lower Data = KPT1200 std grnd plan

Person: Lee Brooks Company: Klipsch Audio Group

Project: Molded surroundsFile: KPT-Molded surrounds SPECS.lib

Aug 11, 2014Mon 9:05 am

4.6.0.371May/29/2007

Note

sM

ap

86: KPT-1200M frequency response

20 Hz 50 100 200 500 1K 2K 5K 10K 20K

dBSPL

75

80

85

90

95

100

105

110

115

SPL vs Freq

Data Measured: Jul 31, 2014 Thr 9:34 am

Person: Lee Brooks Company: Klipsch Audio Group

Project: Molded surroundsFile: KPT-Molded surrounds SPECS.lib

Aug 11, 2014Mon 9:05 am

4.6.0.371May/29/2007

Note

sM

ap

87: KPT-1200 Impedance

10 Hz 20 50 100 200 500 1K 2K 5K 10K 20K

Ohm

3

5

10

20

50

100

200

300

Impedance vs Freq



-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350

Horizontal Polar Pattern

202254320403

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350

Vertical Polar Pattern

202254320403

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


1280161320322560

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


8127102401290216255

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


3225406451206451

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


5086408061016

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


8127102401290216255

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


1280161320322560

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


5086408061016

-36

-30

-24

-18

-12

-6

00

1020

3040

50

60

70

80

90

100

110

120

130

140150

160170

180190

200210

220

230

240

250

260

270

280

290

300

310

320330

340350


3225406451206451

VERTICAL 1/3 OCTAVE POLARS HORIZONTAL 1/3 OCTAVE POLARS



ARCHITECTURAL SPECIFICATIONSThe KI-262-SMA-II compact high power loudspeaker system shall include an 12” (304.8mm) K-281-EP low-frequency transducer utilizing a 3” (76.2mm) diameter voice coil, 80-ounce (2267g) magnet and motor magnet assembly and a K-70-G 1.75” (44.4mm) titanium diaphragm high-frequency 27-ounce (765g) magnet compression driver mounted on a 60˚ X 40˚, heavy duty, injected molded, Tractrix Horn. Signal shall be applied to the transducers via a passive internal frequency-dividing network, incorporating a KLIP-circuit for signal overload protection of the high frequency transducer. The enclosure tuning shall be of a vented design.

Frequency response shall be 71Hz to 20kHz, +/- 3dB, with the -10dBpoint at 57Hz, measured at three meters, half-space anechoic. The dispersion angle shall be 60˚ X 40˚ nominal. Directivity Index shall be 12dB . Sensitivity shall be 100dB SPL, measured at one meter, half-space anechoic, with a 2.83V input. Power handling shall be 300 watts (35 volts), to AES standards, continuous pink noise, 50Hz to 10kHz, 6dB peaks. Calculated maximum continuous output at one meter shall be 121dB SPL. Nominal impedance shall be 8 ohms, with 4.1 ohms minimum at 152Hz.

The internal passive crossover frequency shall be 900Hz with a slope of 12dB/octave on the low frequency and 18dB/octave on the high- frequency. Signal connections shall be made via a two point barrier strip.

A flat metal perforated grille on the cabinet front is for structural integrity and protection of the transducers from impact and tampering.

The enclosure panels shall be CNC-fabricated, 3/4” 7-ply birch plywood, assembled using rabbet and dado joinery. The motorboard baffle shall be 1” (2.54cm) medium density fiberboard. Dimensions for the enclosure shall be 23” (58.42cm) high by 12.6” (32.03cm) deep by 17” (43.18cm) front width and 6.8” (17.27cm) rear width in a symmetrical trapezoidal shape, with both side panels angled at 22.5˚. Net weight shall be 49lbs. (22.27kg).

The enclosure will have a straight metal perforated grille for structural integrity and protection of the transducers from impact and tampering. Enclosure flying capability shall be provided via sixteen internal 3/8”-16 thread mounting points, four per top, bottom and both sides.

The enclosure shall be coated with lacquer-based primer and lacquer-based texture, with a black or white finish. The enclosure shall also be available unfinished in raw.

The system shall be a Klipsch KI-262-SMA-II loudspeaker.


HIGH POWER12" TWO-WAYTRAPEZOIDAL

SPEAKER SYSTEM

Featuring a high-excursion, castframe 12" woofer and 1.5" titanium

diaphragm compression driver on a60˚ X 40˚ Tractrix Horn, the KI-262 isideally suited for applications wheresmall size, uniform power response

and ease of installation contribute toa quality sound solution. The KI-262is recommended for use in theaters,

auditoriums, clubs, churches andA/V production environments. Able

to hang three high using 12 built-in3/8" 16-thread, commercially availablerigging bar-compatible fly points, theKI-262 provides the coverage control,

fidelity and reliability expected ofKlipsch professional loudspeakers.

The 13-ply, Baltic Birch void-free plywood enclosure uses dado

“lock-joint” and rabbet constructiontechniques on CNC-fabricated panels for long-term reliability

and ruggedness.

The speaker utilizes radiused top and bottom panels with a curved

perforated metal grille, and is dualtexture-coated for weather and

corrosion resistance. Available inblack, white or paintable raw birch,the KI-262 is covered by the Klipsch

limited five-year warranty.

K I - 2 6 2� Compact 22.5˚ symmetrical trapezoidal design� 12" woofer and 1.5" titanium diaphragm HF

compression driver� 60˚ X 40˚ Tractrix® Horn for tight pattern control� 12 suspension points for trouble-free mounting� 13-ply, void-free Baltic Birch enclosure� Internal, high current full-range or bi-amp

passive crossover� KLIP-circuit HF driver protection device

FREQUENCY RESPONSE1

POWER HANDLING2

MAXIMUM CONTINUOUS OUTPUT3

DISPERSION ANGLEDIRECTIVITYSENSITIVITY4

NOMINAL IMPEDANCECROSSOVER FREQUENCY

OVERLOAD PROTECTIONCOMPONENTS

ENCLOSURE MATERIAL

INPUT CONNECTIONSDEPTH

HEIGHT WIDTH FRONT

WIDTH BACKNET WEIGHT

SHIPPING WEIGHTFINISHES

75Hz-12.5kHz±4dB, -10dB 64Hz (see graph)250 Watts (41.5V)125dB60˚ Horizontal X 40˚ Vertical (see graph)9dB (see graph)102dB8 Ohms, 6.9 Ohms Minimum at 195Hz (see graph)1400Hz12dB/Octave on LF18dB/Octave on HFKLIP Overload Tweeter Protection CircuitK-42-KP 12" WooferK-52-TI 1.5" Titanium Diaphragm Compression Driver 18mm 13-Ply Baltic Birch Plywood Cabinet1" 11-Ply Birch Plywood BaffleTwo NL-4 Speakon Connectors Wired in Parallel 13.375" (33.973cm)23" (58.42cm)16.813" (42.705cm) 6.813" (17.305cm) 22.5˚ Angled Box 47 lbs. (21.338kg)54 lbs. (24.516kg)Black, White and Raw Birch13M, Half-space anechoic2AES Standard, continuous pink noise 50Hz-10kHz, 6dB peaks3At 1M at power handling power input4SPL at 1M, half-space anechoic with 2.83V input

S p e c i f i c a t i o n s

5M0200190547

8900 Keystone Crossing, Suite 1220Indianapolis, IN 46240

P.O. Box 688Hope, AR USA 71802

1-800-KLIPSCH • www.klipschpro.com

Architectural Specif icationsThe KI-262 compact high power loudspeaker system shallinclude a 12" (304.8mm) K-42-KP low-frequency transducerutilizing a 2.5" (63.5mm) voice coil and 77-ounce (2.18kg)magnet, and a high-frequency K-52-TI 1.5" (38.1mm) titani-um diaphragm, 20-ounce (622g) magnet compression drivermounted on a 60˚ X 40˚ heavy-duty, injection moldedTractrix Horn. Signal shall be applied to the transducers viaa passive, internal frequency-dividing network, incorporat-ing a KLIP-circuit for signal overload protection of the highfrequency transducer. The enclosure tuning shall be of avented design.

Frequency response shall be 75Hz to 12.5kHz, ±4dB, with the -10dB point at 64Hz, measured at three meters, half-space anechoic. The high frequency dispersion angle shallbe 60˚ horizontal by 40˚ vertical nominal (refer to graph).Directivity shall be 9dB (refer to graph). Sensitivity shall be102dB SPL, measured at one meter, half-space anechoic,with a 2.83V input. Power handling shall be 250 watts (41.5volts), to AES standards, continuous pink noise, 50Hz to10kHz, 6dB peaks. Maximum continuous output at onemeter shall be 125dB SPL. Nominal impedance shall be 8ohms, with 6.9 ohms minimum at 195Hz.

The internal passive crossover frequency shall be 1.4kHz,with slopes of 12dB/octave for the low frequency and18dB/octave for the high frequency. The crossover may bemodified for bi-amp application by cutting two easy-accessinternal wires. Signal connections shall be made via two parallel-wired Neutrik NL-4 Speakon panel mount jacks.

The enclosure panels shall be CNC-fabricated, 18mm, 13-ply Baltic Birch void-free plywood, assembled utilizingrabbet and dado joinery. The motorboard baffle shall be 1"(2.54cm) 11-ply birch plywood. Dimensions for the enclo-sure shall be 23" (58.42cm) high by 13.375" (33.973cm) deepby 16.813" (42.705cm) front width and 6.813" (17.305cm) rearwidth in a symmetrical trapezoidal shape, with both sidepanels angled at 22.5˚. Net weight shall be 47 lbs. (21.338kg).The top and bottom panels shall be radiused, with a curvedmetal perforated grille for structural integrity and protectionof the transducers from impact and tampering.

Enclosure flying capability shall be provided via 12 internal 3/8" 16-thread mounting points, three per top, bottom and bothsides, with commercially available rigging bar compatibility.

The enclosure finish shall be lacquer-based primer and lacquer-based texture, with a black or white finish. The enclosure shall also be available unfinished in raw birch.

The system shall be a Klipsch KI-262 loudspeaker.

©2000 Klipsch, LLC. All rights reserved.Specifications subject to engineering changes.

ki-262-sma-ii trapezoidal 12”...

Documents