key points for pumps
TRANSCRIPT
Features of Pc Pumps
• Standard pump for pumping liquid with solid, fibre and abrasive particles.
• Low NPSH requirements.• Flow up to: 3300Lpm Pressure up to: 24 bar.• Ideal for sanitary application.
Features of Flexible Impeller Pump
• With minimum Static and rotating components.
• Self Priming and almost pulsation free flow. • Flow up to:850Lpm Pressure up to: 180 bar• Simple and fast demounting along with
compact and low weight design.
Features of External Lobe Pump
• Non Contact of Pumping element.• Wide range of materials for rotor.• Flow up to: 800lpm Pressure up to: 12 Bar.• Perfect for hygiene application –CIP/SIP
Cleaning.
Features of Internal Lobe Pump
• Simple in construction. • Energy saving and hence economic.• Flow up to: 950lpm Pressure up to: 10 Bar.• An ideal Pump for unloading, transfer and
circulation.
Features of External gear pump
• Twisted gears for silent operation.• PEEK gears for non lubricating media.• Flow up to:850Lpm Pressure up to: 10 bar• Ideal for transfer, Process pumping and high
pressure hydraulics.
Features of Twin Screw pump
• Capable of running dry. • Single flow pumps design available for sanitary
application.• Flow up to: 1000m3/hr Pressure up to: 16
Bar.• Ideal for Bulk transfer Loading and unloading.
Features of vane pump
• Built in self adjusting mechanism for compensating wear.
• High Volumetric efficiency and dry running capabilities.
• Flow up to: 400Lpm Pressure up to: 8 Bar. Capable for pumping fluid with gas.
• Ideal for wide range of clean and non corrosive fluid.
Features of Peristaltic Pumps
• Shaft Sealing is not required• Reversible flow and absolute volumetric flow
is possible.• Flow up to: 2500lph Pressure up to: 2 Bar.• Ideal for hazardous & corrosive fluids
Features of Triple Screw Pump
• Pump delivers pulsation free flow with low noise levels.
• Can run at high speeds• Flow up to: 3600 LPM Pressure up to: 40 Bar.• Designed for 24*7 critical duties application.
Features of Internal gear pump
• Insensitive to viscosity• With built in speed reducer it delivers fluid
with low noise and pulsation.• Flow up to: 800Lpm Pressure up to:7 Bar
and in special cases up to 13 Bar• Pumps extensively used in process industries.
Features of Hot oil Pump
• Air cooled no separate pump required for the cooling jacket.
• Replicable 1:1 with standard Heat oil pump.• Flow up to: 3500Lpm Pressure up to:10 Bar • Available with Standard Mechanical Seal &
Magnetic coupling arrangement.
Features of Pumping Systems
• Can customize simplex and duplex pumping systems for lube and fuel oils .
• Can also provide Simplex and duplex strainers tailor made as per the requirement.