kenstan lock catalog
DESCRIPTION
Kenstan Lock Company manufacturers a full line of high- quality showcase and cabinet locks for commercial, retail and industrial use. With our commitment to total service, we can assist you with security layouts, keying plans and customized products to meet your specific security demands.TRANSCRIPT
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
2008 Catalog
Kenstan Lock Company manufactures a full line of high-quality showcase and cabinet locks for commercial, retail and industrial use.With our commitment to total service, we can assist you with security layouts, keying plans and customized products to meet your specific security demands.
Disc Tumbler
Keymatic
Medeco® Core
Pin Tumbler
Interchangeable Core
Accessories
KenstanL O C K C O M P A N Y
2008 Catalog
Kenstan
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
S VASSA® ABLOY®
LO
CK
C
OM
PA
NY
2008 C
atalog
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Terms and Conditions of Sale2008 KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
1. Pricing: Kenstan Lock reserves the right to institute price adjustments based upon fluctuation of material costs without prior notice. Orders, or balances of orders, that have not shipped within 6 months from the original order date may be subject to a price review.
2. Payment Terms: Terms on all orders, unless otherwise approved by Kenstan, are Net 30 Days from the date of the invoice. A service charge of 1.5% per month will be charged on overdue accounts.
3. Shipping: Please be sure to specify your preferred shipping method on every order. For all orders received without shipping instructions, Kenstan will use our discretion to make carrier selection based upon the most economical method of shipment available to meet your required in house date. Kenstan is not responsible for risk of loss or damage to products in transit with the selected carrier.
4. Deliveries: At Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within 2 weeks from the receipt of your order. Rush order and emergency services are available. Unless specifically prohibited in writing by the purchaser, Kenstan reserves the right to make partial shipments of any order.
5. Inspection: Kenstan Lock inspects all products in accordance with our standard quality control procedures. Upon receipt and inspection by the purchaser, any parts proven to be defective or not as ordered may be returned to Kenstan for repair or replacement following the conditions in the “Returned Goods” section (#6) below.
6. Returned Goods: Product replacement or account credit for any returned goods will be made solely at the discretion of Kenstan and will only be accepted upon the issuance of a Return Authorization number from Kenstan’s Customer Service Department. Merchandise proven to be defective, due to faulty material and/or workmanship, may be returned for full replacement or credit. Kenstan Lock Co. will only warranty locks and parts that were modified by our factory. Any product ordered incorrectly by the customer may be accepted for return and subject to a 50% handling charge. Locks made with special or out-of production parts are not returnable, unless prior arrangements have been made. Returned merchandise that is damaged in transit, due to inadequate return packaging, will not be accepted.
7. Warranty: Kenstan Lock warrants, for a period of one year from delivery, that our products are free from defects in material and workmanship and makes no other warranties, expressed or implied, including but not limited to the degree of security or the purchaser’s application or use of our product. In the event of a product defect, Kenstan shall only be responsible to the extent of the cost of our product, and will not accept any claims for labor or loss of merchandise.
8. Cancellation: If all or any part of an order is cancelled before the completion of the product assembly by Kenstan, the purchaser shall be responsible for payment of all assembled items as well as any special parts ordered for items remaining unassembled at the time of cancellation. If pricing on the original order was based upon Kenstan’s quantity discount, a partial cancellation may affect the pricing on items already shipped and invoiced and a price adjustment will be made.
9. Catalog Dimensions and Sample Policy: Please be aware that all lock and part drawing dimensions carry a tolerance of plus or minus 1/16’’ and are for reference only. Please contact us for actual dimensions. Samples of all of our products are available upon request.
Since 1963, Kenstan Lock Company has manufactured several lines of high-quality showcase and cabinet locks, each with their own unique security features. Each year, we continue to enhance our existing prod-uct lines, while adding new products to meet the ever-changing needs of our commercial, industrial and retail clients. We also offer a wide range of door hardware locks, such as mortise and rim cylinders, as well as le-ver and tubular handles for fitting rooms, stock rooms, offices, etc.
Our product lines are complimented by Kenstan as-sociates who are available to assist you with security layouts, keying plans and custom products as needed.
Each of our lines, and all of our products, are manu-factured using the highest standards of quality and we stand behind each and every product we deliver. From the quality products assembled in our factory to our shipping and customer service departments, our goal is to provide the best service possible, from start to finish.
At Kenstan, we take pride in our reputation that has been built on quality products, reliability and the excep-tional customer service that our clients depend on.
Introduction
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
D Line Disc Tumbler Locks Basic cabinet and showcase locksOur standard security line of flat key Disc Tumbler locks is available in various lock types, includ-ing Cam, Plunger, Dead Bolt, Spring Bolt, Z Bolt and Ratchet locks. Each lock can be keyedalike, keyed different and master keyed.
K Line Keymatic Locks A revolutionary security system with 8 locks in 1These tubular key pin tumbler locks contain 8 key combinations in each lock and thousands ofkey codes. Every Keymatic lock permits you to reset the lock to one of the eight key combina-tions using our Red Change Tool. Our K Line offers the same diverse lock types as our D Line.
I Line I.C. Core Locks A complete line of Interchangeable Core locks These 6 and 7 pin I.C. locks feature the traditional figure 8 Interchangeable Core equivalent to BestAccess lock housings and cores – but with some additional features. Our I Line includes a full lineof Cam, Dead Bolt, Spring Bolt, Plunger and Ratchet locks, as well as door hardware locks suchas Rim and Mortise Cylinders, Lever and tubular handles and other specialized locking devices. AllI Line locks can be keyed alike, keyed different, master keyed and grand master keyed.
P Line Pin Tumbler Locks Pin Tumblers for longer life and greater securityThis is our line of Flat Key Pin tumbler locks available in National, Corbin and Schlage keyways. Aswith other Kenstan lock lines, our P Line comes in a wide variety of lock types such as Cam, DeadBolt, Spring Bolt and Plunger locks. The P line can be keyed alike, keyed different, master keyedand grand master keyed.
M Line Kenstan Locks featuring Medeco® Cores High security with restricted keys Our M line High Security, Biaxial Pin Tumbler showcase and cabinet locks provides an extremelylong service life. Our M Line locks use genuine Medeco® cores manufactured to Kenstan specifi-cations. Many of the locks within our M line are also available with a Key Removable Core (our RSeries). All locks within our M line come with either Restricted Biaxial or Medeco3® RestrictedBiaxial keyways and can be keyed alike, keyed different, master keyed and grand master keyed.
S Line Kenstan Locks featuring ASSA® Cores High security with restricted keys Our S line showcase and cabinet locks offer direct drive pin technology and are designed to offera high level of physical security. The cylinder locking mechanism is uniquely designed to offersmooth operation and long life. All S Line locks can be keyed alike, keyed different and masterkeyed.
V Line Kenstan Locks featuring ABLOY® Cores High security with restricted keys Our V line showcase and cabinet locks offer rotating disc technology and are designed to offer ahigh level of physical security. The disc-style locking mechanism is designed without springs,assuring long life and smooth operation. All V Line locks can be keyed alike, keyed different, mas-ter keyed, grand master keyed and great grand master keyed.
Kenstan Line of Locks
Disc Tumbler Line of Locks
Disc Tum
bler
KenstanL O C K C O M P A N Y
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Z Bolt Lock
Ratchet Lock
Keys
D3
D2
D4
D5
D10
D9
D8
D7
D12
D13
D14
D1
D11
D6
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
2008
Introduction
Disc Tumbler Line D12008
Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SN Satin Nickel
Disc Tumbler Line of Locks
Kenstan is upgrading our complete Disc Tumbler D line of locks.Beginning in 2007, our D line will be utilizing our Higher Security BControlled Keyway as the standard keyway. Our B keyway differs fromstandard industry restricted offerings since it has been specificallydesigned to offer key control at economy pricing. All new orders with-out existing assigned key specifications will be assembled with ourControlled B keyway.
The original D Line “54G” keyway locks and keys will still be available forpurchase to match existing key systems.
Our large component inventory and assemble-to-order factory enablesyou to order door locks, drawer locks and sliding door lock types keyedalike, keyed individually or in groups, and master keyed using hundredsof key combinations. Kenstan maintains a historical database of keyingrecords, giving you the ability to match key numbers to support thesecurity needs of a specific end user.
NNoottee: When placing your lock order, please be aware that keys for boththe “B” and “5544GG” keyways will no longer be included with your lockpurchase. All keys are now sold separately. Please refer to our DiscTumbler Key section for details.
DeliveryAt Kenstan, we assemble every lock to order and strive to meet yourrequested in-house date. Our standard lead time is to ship within 2weeks from the receipt of your order. Rush order and emergency ser-vices are available.
PlatingThe D line standard plating finish is Polished Nickel.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including SatinNickel, Polished Brass, Satin Brass, Statuary Bronze, Matte Black andCustom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes – callfor pricing.
Key ControlKenstan can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain a his-torical database of key numbers.
Key Retaining vs. Non-Key Retaining Lock FunctionThe D line standard operation is a non-key retaining function (non-captive), which means that the operating key can be removed inboth the locked and unlocked position.
For higher security we recommend the key retaining (captive) function,which ensures that the key can only be removed in the locked positionand cannot be accidentally left in the open/unlocked position.
Designer Note: For ttrruuee captive operation, the use of our captive keylocks must be coordinated with sliding door showcase design. The useof nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrict door move-ment and ensure key removal only when the doors are in the sseeccuurreeposition.
PN Polished Nickel
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 1
NO
TE
: Keys ar e no
t included
with this lo
ck.S
ee pag
e D14 to
or d
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F G H I J
CL B 05 1203 PN Y Y Y N 106
A
B
C
D
E
F
G
I
H
Cam Type Price
STRAIGHT (ST)
101 5/8" $ 0.00 102 3/4" 0.00103 7/8" 0.00104 1" 0.00105 1-1/8" 0.00106 1-1/4" Std.107 1-3/8" 0.45108 1-1/2" 0.45110 1-3/4" 0.45112 2" 0.50116 2-1/2" 0.50
1/8" OFFSET
303 7/8" 0.60306 1-1/4" 0.65308 1-1/2" 0.65312 2" 0.70
1/4" OFFSET
403 7/8" 0.60404 1" 0.65406 1-1/4" 0.65408 1-1/2" 0.65410 1-3/4" 0.65412 2" 0.70414 2-1/4" 0.70
3/8" OFFSET
504 1" 0.65506 1-1/4" 0.65508 1-1/2" 0.65512 2" 0.70
1/2" OFFSET
606 1-1/4" 0.65608 1-1/2" 0.65610 1-3/4" 0.65612 2" 0.70
5/8" OFFSET
712 2" 2.00
HOOK (HK)
202 3/4" 0.60204 1" 0.65206 1-1/4" 0.65208 1-1/2" 0.65210 1-3/4" 0.65
CUSTOM CAM
CL Call
J
All Cam Locks come with a 1-1/4" Straight Cam unless a different cam is chosen.
*Option not available in core type B.All 180 degree rotations are Non Key Retaining.
Lock StyleCL Cam Lock
Core TypeD Disc TumblerB Controlled Keyway
Housing Length PriceMAXIMUMMATERIAL BARREL THICKNESS LENGTH
01 1/8" 7/16" $ 9.9202 1/4" 5/8" 10.3003 1/2" 7/8" 10.7504 15/16" 1-1/8" 11.5605 1-1/8" 1-3/8" 12.5706* 1-1/2" 1-11/16" 15.3810 1-3/8" 1-3/4" 34.7111 1-3/4" 2" 35.5212 2" 2-1/4" 36.5213 2-1/4" 2-3/4" 38.4014 2-5/8" 3" 39.2215 3" 3-1/4" 40.22
Cam RotationLOCKED OPEN
0312 3 120306 3 60309 3 90612 6 120603 6 30609 6 90912 9 120903 9 30906 9 61203 12 31206 12 61209 12 9
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No 0.00Y Yes 0.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 2
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Cam Lock CL
Disc Tumbler Line D3
Straight Cam Offset Cam Hook Cam
HOUSING LENGTH 06
1/4"
HOUSING LENGTHS 10, 11, 12, 13, 14 and 15
WASHER
1-1/4"TYP.
1-1/4"TYP.
1/4"
7/8" EXTENSION SLEEVE
ANTI-ROTATION PLATE
FACE SLEEVE
SCREW
CAM ROTATIONS (Front of lock shown)
LOCKED @12OPEN @9
LOCKED @12OPEN @3
LOCKED @12OPEN @6
LOCKED @12OPEN @6
12
9 3
6
LENGTH
OFFSET DIM
LENGTH
HOUSING LENGTHS 01, 02, 03, 04 and 05
1/8"TYP.
3/4"TYP.
7/8"TYP.
1/8"
5/8"TYP.
7/8"TYP.
2008Price List and Data Sheet
Cam Type
LENGTH
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
CAM LOCK GLASS INSTALLATION PACKAGE (See Accessories page A8 for prices)
VERTICALFLATS
All 180 degree rotations are clockwise, unless specified.
METAL INSTALLATION WITH OFFSET CAM
GLASS INSTALLATION WITH HOOK CAM
WOOD INSTALLATION WITH STRAIGHT CAM
Note: All cams are reversible.
STRAIGHT CAM ANTI-ROTATIONTHREE TABMOUNTING PLATE(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
MOUNTINGSCREWSREQUIRED(NOT INCLUDED)
ANTI-ROTATIONTHREE TABWASHER(TABS BENTOVER TO PRE-VENT NUT FROMBACKING OUT)
SEM-SCREW
SEM SCREW
SEM-SCREW
OFFSET CAM
HOOK CAM
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
CALL KENSTAN FOR LOCK ILLUSTRATION.
GLASS
a METAL WASHER 2
b J BRACKET 1(anti-rotation)
c PLASTIC WASHER 1(adhesive)
d RUBBER WASHER 1
PART QTY.
dc
b
a
a
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 3
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
ord
er keys.
D4
DL Drawer/Door Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Prices vary acco
rdin
g to
qu
antity o
rdered
.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
STRAIGHT BOLT
2001200220032004
2205
3208
3209
3/8" OFFSET BOLT
STEEL SPRING BOLT (3/16” bolt engagement recommended)
STEEL SPRING BOLT (3/16” bolt engagement recommended)
34103411 (shown)
SLIDING SPRING BOLT
“Throw” (distance bolt travels from the locked to unlocked position) is 5/16".
All dimensions shown are in the locked position.
DL B S 3209 PN N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
SML
5/16"
3/8"
5/16"
3/8"3/4"
5/8"
1-5/16"
1-1/4"
1/8"
3/8"
1/4" TYP.
1-3/8" TYP.
7/8"TYP.
2"
1-7/16"
5/8"
5/32" DIA. TYP.
Lock StyleDL Drawer/Door Lock
Core TypeD Disc Tumbler B Controlled Keyway
Housing Length PriceS 13/16" Std. M 1-1/16" $ 1.41L 1-3/16" 2.49
Bolt TypeSTRAIGHT BOLT
2001 1-1/16" 12.492002 1-11/16" 12.602003 2-5/16" 12.712004 3-1/8" 12.82
3/8" OFFSET BOLT
2205 1-5/8" 13.14
STEEL SPRING BOLT
3208 1-5/16" 15.22
STEEL SPRING BOLT
3209 1-5/16" Std. 15.22
SLIDING SPRING BOLT
3410 1-5/16" Left 20.493411 1-5/16" Right 20.49
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key Retaining
* Option available only on Straight Boltand 3/8" Offset Bolt models.
N No Std.Y* Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 4
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
or d
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Gang Lock GL
Disc Tumbler Line D5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SML
7/8"TYP.
1/4" TYP.
1-3/8"
2"1/16"
5/8"
1-1/4"
2"
1-7/16"
5/32" DIA. TYP.
26242636264826CL30243036304830CL
FRONT MOUNT – SIDE VIEW
SIDE MOUNT (Shown with a Gang 3C Kit)
24242436244824CL28242836284828CL
FRONT MOUNT – FRONT VIEW
FRONT MOUNT (Shown with a Gang 3C Kit)
Gang Lock PackagesTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
CBA
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8"B 3/4"C 1-1/8"D 1-7/8"
GANG 3 C
GANG 3C A kit with threeadjustable stops, three 1-1/8" pins, three lock washers, and four closed bar guides.
GL B L 2636 PN Y Y Y N
CBA D E F G H I
A
B
C
D
E
F
G
H
I
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Lock StyleGL Gang Lock
Core TypeD Disc Tumbler B Controlled Keyway
Housing Length PriceS 13/16" $11.90M 1-1/16" 13.30L 1-3/16" 14.39
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24" 7.75 2436 36" 9.10 2448 48" 19.95 24CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24" 7.752636 36" 9.10 2648 48" 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24" 7.75 2836 36" 9.10 2848 48" 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24" 7.75 3036 36" 9.10 3048 48" 19.95 30CL Custom Call
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No Std.Y Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 5
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
or d
er keys.
D6
DL36 Snap Bolt Lock
KenstanL O C K C O M P A N Y
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
2008Price List and Data Sheet
Prices vary acco
rdin
gto
qu
antity o
rdered
.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
DL B S 36 PN N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Price
Lock StyleDL Drawer/Door Lock
Core TypeD Disc Tumbler B Controlled Keyway
Housing Length PriceS 13/16" Std.
Bolt TypeSNAP BOLT
36 3/4" $19.22
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
STRAIGHT BOLT
ISOMETRIC VIEW
All dimensions shown are in the locked position.
S
3/8”
STRIKE
1-1/8”
1”
1”
.83
.83
7/8"
2"
1-3/8"
1-7/16"
1-5/8"
1-5/8"
53/64”REF.
5/32" DIA. TYP.
STRIKE FRONT VIEW STRIKE SIDE VIEW
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 6
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
or d
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL40
Disc Tumbler Line D7
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D E F G H I
A
B
C
D
E
F
G
I
H
PL B 40 S3 PN Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
ROUND EXTENDED SERIES (Plunger travels 9/16”)
R4R5R6R7
T1T3
T SERIES
R1R2R3
ROUND SERIES
S SERIES
S1S2S3
3/16" THRU TYP.
7/8" TYP.
1-1/2" TYP.1/2"
3/8"
1"TYP.
1/16"TYP.
7/8"TYP. 2"
1/8"
STRIKE PLATE
1/2"
1/16"
3/8"
1/4"EXTENSIONDIAMETER
EXTENSION PINWILL NOTRETRACT INTOHOUSING
PIN
3/8" PLUNGERDIAMETER
All dimensions shown are in the locked position.
Lock StylePL Plunger Lock
Core TypeD Disc TumblerB Controlled Keyway
Housing Style40 Oval Flange
Plunger Type/Length PriceS SERIES
S1 3/8" $18.68S2 7/16" 18.46S3 5/8" 18.24
T SERIES
T1 1/4" 23.38T3 9/16" 23.27
ROUND SERIES
R1 3/8" 19.33R2 7/16" 19.06R3 9/16" 18.79
ROUND EXTENDED SERIES
R4 1-3/16" 24.09R5 1-5/16" 24.19R6 1-11/16" 24.30R7 2-7/16" 24.41
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No Std.Y Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 7
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
or d
er keys.
D8
PL45 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D E F G H I
A
B
C
D
E
F
G
I
H
PL B 45 S3 PN Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Prices vary acco
rdin
g to
qu
antity o
rdered
.
R1R2R3
ROUND SERIES
R4R5R6R7
ROUND EXTENDED SERIES (Plunger travels 9/16”)
S1S2S3
S SERIES
7/8"TYP.
1-1/8"
1/2"
3/8"
5/8"
#4-40 (STANDARD)
3/8"
5/8"
5/8"
1/4" EXTENSIONPIN DIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSINGPIN
3/8" PLUNGERDIAMETER
Lock StylePL Plunger Lock
Core TypeD Disc TumblerB Controlled Keyway
Housing Style45 No Flange
Plunger Type/Length PriceS SERIES
S1 5/16" $20.39S2 7/16" 20.17S3 5/8" 19.95
T SERIES
T1 1/4" 25.09T3 9/16" 25.21
ROUND SERIES
R1 5/16" 21.04R2 7/16" 20.76R3 9/16" 20.49
ROUND EXTENDED SERIES
R4 1-3/16" 25.79R5 1-5/16" 25.90R6 1-11/16" 26.01R7 2-7/16" 26.12
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No Std.Y Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
T1T3
1/8"
1/16"
1/2"
T SERIES
All dimensions shown are in the locked position.
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 8
Prices vary acco
rdin
gto
qu
antity o
rdered
.N
OT
E: K
eys are not includ
ed w
ith this lock.
See p
age D
14 to o
rder keys.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL49
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
D8
CBA D E F G H I
A
B
C
D
E
F
G
I
H
THROUGH THE TRACK PLUNGER
PL B 49 X PN Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
1"
1/2"
7/16"
1/4"
5/8"
1/8"
1-3/16"
3/8"
1/8"
1/2"
Lock StylePL Plunger Lock
Core TypeD Disc TumblerB Controlled Keyway
Housing Style Price49 Through the Track $43.21
Plunger
Plunger TypeX No Option
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95CF Custom Finish Call
Key RetainingN No Std.Y Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
“Throw” (distance bolt travels from the locked to unlocked position) is 7/16".
All dimensions shown are in the locked position.
D9
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 9
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
ord
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
D10
PL50 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
R4R5R6R7
R1R2R3
1/4"
3/8" PLUNGERDIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSING
a DOUGHNUT 1
c RUBBER WASHER 2
d PLASTIC SPACER 1
e SCREW 4
PARTS INCLUDED QTY.
REAR GLASS
a
b
c
d
fe
ac
dc
FRONT GLASS
c
e
D9
S1S2S3
T1T3
T SERIES
7/8" TYP.
1" TYP.
1/2"
1/16" TYP. 1/2" TYP.
7/8" TYP.
3/8"
1-1/2" TYP.
1/8"
STRIKEPLATE
1/8"
1/16"
a DOUGHNUT
b J BRACKET (anti-rotation)
c RUBBER WASHER
d PLASTIC SPACER
e SCREW
f STRIKE PLATE
PL B 50 S3 PN Y Y Y N
CBA D E F G H I
A
B
D
E
F
G
I
H
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
B
C
ROUND SERIES (Plunger travels 9/16”)
PARTS INCLUDED QTY.
a DOUGHNUT 2
b J BRACKET 1(anti-rotation)
c RUBBER WASHER 4
d PLASTIC SPACER 2
e SCREW 8
f STRIKE PLATE 1
L3L SERIES
7/8"3/8"
1/8"
PARTS INCLUDED QTY.
a DOUGHNUT 1
b J BRACKET 1(anti-rotation)
c RUBBER WASHER 2
d PLASTIC SPACER 1
e SCREW 4
T SERIES INSTALLATION
All dimensions shown are in the locked position.
Lock StylePL Plunger Lock
Core TypeD Disc TumblerB Controlled Keyway
Housing Style50 Round Flange
Plunger Type/Length PriceS SERIES
S1 3/8" $38.24 S2 7/16" 38.03 S3 5/8" 37.81
T SERIES
T1 1/4" 42.95 T3 9/16" 42.84
L SERIES
L3 3/8" 40.57
ROUND SERIES
R1 3/8" 38.89 R2 7/16" 38.62 R3 9/16" 38.35
ROUND EXTENDED SERIES
R4 1-3/16" 43.65 R5 1-5/16" 43.76 R6 1-11/16" 43.87 R7 2-7/16" 43.97
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No Std.Y Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
S SERIES (Parts included same as Round Series)
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 10
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
ord
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL51
Disc Tumbler Line D11
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D E F G H I
A
B
C
D
E
F
G
I
H
PL B 51 B6 PN N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Lock StylePL Plunger Lock
Core TypeD Disc TumblerB Controlled Keyway
Housing Style51 Key Hole Lock
Material Thickness/Plunger PriceMATERIAL PLUNGER THICKNESS LENGTH
SHORT PLUNGER
B3 1/4" 3/4" Std. $28.98B4 3/8" 5/8" 29.08
LONG PLUNGER
B6 1/4" 1-1/2" Std. 27.92B7 3/8" 1-3/8" 28.02B8 7/8" 1-1/32" 28.12
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No Std.Y Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
All dimensions shown are in the locked position.
SHORT PLUNGER
1-1/8"TYP.
B3,B4
1/8" TYP.
PLUNGERLENGTH
1"TYP.
5/8" TYP.
MATERIALTHICKNESS
1/4" TYP.
a
e
KEY HOLE LOCK – EXPLODED VIEW
a HOUSING
c RUBBER WASHER
d BACK PLATE
e MOUNTING SCREWS
MATERIAL
cdc
LONG PLUNGER
B6,B7,B8
PLUNGERLENGTH
MATERIALTHICKNESS
1 Kenstan Disc Tumbler 2008 6/23/08 9:25 AM Page 11
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e D14 to
or d
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
D12
ZL Z Bolt Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D E F G H I
A
B
C
D
E
F
G
I
H
SMALL HOUSING
Z5Z6
LARGE HOUSING
ZL B 38 Z1 PN Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Z1Z2Z3
9/16"
7/16"
1/8" BOLTTHICKNESS
5/8"7/8"
3/4"
3/4"1"
1"
7/16"
1-3/16"
1/4"
1/8" BOLTTHICKNESS
5/8"1-1/4"
1-7/16"
3/4"1"
1-9/16"
7/16"
Lock StyleZL Z Bolt Lock
Core TypeD Disc Tumbler B Controlled Keyway
Housing Style38 Sliding Door
Dead Bolt
Bolt Type/Length PriceSMALL HOUSING BOLT
Z1 5/16" Std. $14.30Z2 1/2" 14.62Z3 13/16" 14.84
LARGE HOUSING BOLT
Z5 5/16" Std. 20.95Z6 1/2" 21.27
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 2.50BL Matte Black 2.50ST Statuary Bronze 2.50CF Custom Finish Call
Key RetainingN No Std.Y Yes 1.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
All dimensions shown are in the locked position.
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 12
Prices vary acco
rdin
gto
qu
antity o
rdered
.N
OT
E: K
eys are not includ
ed w
ith this lock.
See p
age D
14 to o
rder keys.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Ratchet Lock RL
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D E F G H I
A
B
C
D
E
F
G
I
H
STANDARD BAR B1
ADJUSTABLE BAR B2
RL B 60 B1 PN N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
4-1/2"
1-1/4" TYP.
1-3/4" TYP.
11/16"
1/2" TYP.
1/4" MAX. GLASS THICKNESS
1-3/8" TYP.
1" MINIMUM3-3/8" MAXIMUM
1" 1-1/8"
5/8" TYP.
1" MINIMUM3-1/8" MAXIMUM
3/4" MAX. GLASS THICKNESS
1-1/16"
1-1/2"
4-1/4"
Lock StyleRL Ratchet Lock
Core TypeD Disc Tumbler B Controlled Keyway
Housing Style60 Ratchet
Bar Type PriceB1 Standard $15.22B2 Adjustable 19.96
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95CF Custom Finish Call
Key RetainingN No Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.85
D13
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 13
D14
KEY Keys 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Disc Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D
KEY B O A
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
Disc Tumbler B Controlled Keys
Beginning in 2007, our Disc Tumbler B Controlled Keyway willbe our standard product offering. The B Controlled Keywayseverely limits unauthorized key duplication since key blanks arenever sold. Cut keys can only be ordered through the Kenstanfactory. All new lock orders without keying specifications orspecified key numbers will be assembled with the controlled Bkeyway components and keys. B keyway keys are alwaysordered separately from the locks.
B Controlled Keys are differentiated from “54G” keys through theuse of Over Molded Covers. B operating keys have a Blue OverMolded Cover and B Master Keys have a Red Over MoldedCover. A B is also marked on the plug face of the controlledkeyway while “54G” plug faces do not have a letter designation.
Disc Tumbler “54G” Keys.
In an effort to minimize key proliferation, Kenstan will no longerbe including keys for the “54G” keyway with your lock purchase.All keys must be ordered separately.
Kenstan recommends the purchase of our factory original keysto ensure smooth lock operation. Use of non-Kenstan copykeys will void the Kenstan Warranty on our locks.
ItemKEY Key
Core Type PriceD Disc Tumbler $0.50B Controlled Keyway 0.50
Key FunctionO Operating*M Master
Key CodeXXXXX Specific
Up to 5 digits
A AnyKenstan assigns
“B” Controlled Keyway “54G” Keyway
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 14
KenstanL O C K C O M P A N Y
Keymatic Line of Locks
Keym
atic
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Z Bolt Lock
Ratchet Lock
Keys
K3
K2
K4
K5
K10
K9
K8
K7
K12
K13
K14
K1
K11
K6
2008
Introduction
2008Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SN Satin Nickel
Keymatic Line of Locks
Our K line offers excellent security in a variety of lock types that canbe keyed to thousands of different key codes. Each key code haseight individual operating keys 1 through 8, used one at a time tooperate the lock. Our Red Change Tool can reset the lock to allowa new operating key (within the assigned code) to open the lock anytime a key is lost or stolen – truly eight locks in one.
Locks can be keyed alike, individually or in groups
DeliveryAt Kenstan, we assemble every lock to order and strive to meetyour requested in-house date. Our standard lead time is to shipwithin 2 weeks from the receipt of your order. Rush order andemergency services are available.
PlatingThe K line standard plating finish is Polished Nickel.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, includingSatin Nickel, Polished Brass, Matte Black, Statuary Bronze, SatinBrass and Custom Finishes to match your showcase hardware.
Please note: Plating lot charges may apply to the special finishes –call for pricing.
Key ControlKeymatic locks and keys are built to a high level of precision, makingkey duplication very difficult. Please note: We recomend our factoryoriginal key for smooth lock operation. Use of non-Kenstan copy willvoid the Kenstan warranty on our locks.
We can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain ahistorical database of key numbers.
All operating keys are stamped with a two-digit, alpha numeric datecode, a four-digit, numeric Keymatic code and a one-digit, numericsetting code (from 1 to 8) with a matching color coded key cover.The Red Change Tool is stamped with the same code as the oper-ating key, except without the setting code.
Key Retaining vs. Non-Key Retaining Lock FunctionThe K line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
K locks can also be supplied as non-key retaining (non-captive),which allows the key to be removed in both the locked and unlockedposition.
Designer Note: For ttrruuee captive operation, the use of our captivekey locks must be coordinated with sliding door showcase design.The use of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrictdoor movement and ensure key removal only when the doors are inthe sseeccuurree position.
PN Polished Nickel
Keymatic Line K1
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
F GCBA D E
CL K 05 1203 PN Y 106
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
KenstanL O C K C O M P A N Y
A
B
C
D
E
F
Cam Type Price
STRAIGHT (ST)
101 5/8" $ 0.00 102 3/4" 0.00103 7/8" 0.00104 1" 0.00105 1-1/8" 0.00106 1-1/4" Std.107 1-3/8" 0.45108 1-1/2" 0.45110 1-3/4" 0.45112 2" 0.50116 2-1/2" 0.50
1/8" OFFSET
303 7/8" 0.60306 1-1/4" 0.65308 1-1/2" 0.65312 2" 0.70
1/4" OFFSET
403 7/8" 0.60404 1" 0.65406 1-1/4" 0.65408 1-1/2" 0.65410 1-3/4" 0.65412 2" 0.70414 2-1/4" 0.70
3/8" OFFSET
504 1" 0.65506 1-1/4" 0.65508 1-1/2" 0.65512 2" 0.70
1/2" OFFSET
606 1-1/4" 0.65608 1-1/2" 0.65610 1-3/4" 0.65612 2" 0.70
5/8" OFFSET
712 2" 2.00
HOOK (HK)
202 3/4" 0.60204 1" 0.65206 1-1/4" 0.65208 1-1/2" 0.65210 1-3/4" 0.65
CUSTOM CAM
CL Call
G
Prices vary acco
rdin
g to
qu
antity o
rdered
.
Lock StyleCL Cam Lock
Core TypeK Keymatic
Housing Length PriceMAXIMUMMATERIAL BARREL THICKNESS LENGTH
02 1/2" 11/16" $23.0003 11/16" 15/16" 23.8404 7/8" 1-1/8" 24.6905 1-1/4" 1-1/2" 25.5310 1-5/8" 1-13/16" 43.0311 1-13/16" 2" 43.8712 2-1/8" 2-3/8" 44.7113 2-1/2" 2-13/16" 45.5514 2-11/16" 3" 46.3915 3" 3-3/8" 47.23
Cam RotationLOCKED OPEN
0312 3 120306 3 60309 3 90612 6 120603 6 30609 6 90912 9 120903 9 30906 9 61203 12 31206 12 61209 12 9
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
All Cam Locks come with a 1-1/4" Straight Cam unless a different cam is chosen.
All 180 degree turns are clockwise, unless specified.
LOCK
FACESLEEVE
EXTENDEDROUND
MOUNTINGSCREWS
ANTI-ROTATIONPLATE
WASHER
STRAIGHTCAM
EXTENSIONSLEEVE
INT. TOOTHLOCK WASHER
SCREW
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Cam Lock CL
Keymatic Line K3
HOUSING LENGTHS 10, 11, 12, 13, 14 and 15
LOCKED @12OPEN @9
LOCKED @12OPEN @3
LOCKED @12OPEN @6
LOCKED @12OPEN @6
12
9 3
6
HOUSING LENGTHS 02, 03, 04 and 05
BARREL LENGTH
1/8"TYP.
3/4"TYP.
7/8"TYP.
1/4"
5/8"TYP.
7/8"TYP.
2008Price List and Data Sheet
MAXIMUMMATERIAL
THICKNESS
Straight Cam Offset Cam Hook Cam
LENGTH
OFFSET DIM
LENGTH
Cam Type
LENGTH
B
A
1/8"
WASHER
1-1/4"TYP.
1-1/4"TYP.
3/8"
7/8" EXTENSION SLEEVE
ANTI-ROTATION PLATEFACE SLEEVE
SCREW
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
CAM LOCK GLASS INSTALLATION PACKAGE (See Accessories page A8 for prices)
CAM LOCK – EXPLODED VIEW
SETSCREW
VERTICALFLATS
All 180 degree rotations are clockwise, unless specified.
METAL INSTALLATION WITH OFFSET CAM
GLASS INSTALLATION WITH HOOK CAM
WOOD INSTALLATION WITH STRAIGHT CAM
Note: All cams are reversible.
STRAIGHT CAMANTI-ROTATIONTHREE TABMOUNTING PLATE(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
MOUNTINGSCREWSREQUIRED(NOT INCLUDED)
CAMADAPTER
SMALL THREETAB WASHER
NUT
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
MOUNTINGSCREWS REQUIRED(NOT INCLUDED)
CAMADAPTER
NUT
CAMADAPTER
OFFSET CAM
SMALL THREETAB WASHER
SMALL THREETAB WASHER
NUT
HOOK CAM
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.CALL KENSTAN FOR LOCK ILLUSTRATION.
GLASS
dc
b
a
a
a METAL WASHER 2
b J BRACKET 1(anti-rotation)
c PLASTIC WASHER 1(adhesive)
d RUBBER WASHER 1
PART QTY.
CAM ROTATIONS (Front of lock shown)
“Throw” (distance bolt travels from the locked to unlocked position) is 5/16".
All dimensions shown are in the locked position.
3208
2205
K4
DL Drawer/Door Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Prices vary acco
rdin
g to
qu
antity o
rdered
.
CBA D E F
A
B
C
D
E
F
3209
3/8" OFFSET BOLT
STEEL SPRING BOLT (3/16” bolt engagement recommended)
STEEL SPRING BOLT (3/16” bolt engagement recommended)
34103411 (shown)
SLIDING SPRING BOLT
DL K S 3209 PN N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
5/16"
3/8"
5/16"
3/8"3/4"
5/8"
1-5/16"
1-1/4"
1/8"
3/8"
STRAIGHT BOLT
2001200220032004
SML
1/4" TYP.
1-3/8" TYP.7/8" TYP.
2"
1-7/16"
5/8"
5/32" DIA. TYP.
Lock StyleDL Drawer/Door Lock
Core TypeK Keymatic
Housing Length PriceS 13/16" Std. M 1-1/16" $ 2.02L 1-3/16" 4.80
Bolt TypeSTRAIGHT BOLT
2001 1-1/16" 26.502002 1-11/16" 26.612003 2-5/16" 26.722004 3-1/8" 26.83
3/8" OFFSET BOLT
2205 1-5/8" 27.15
STEEL SPRING BOLT
3208 1-5/16" 28.70
STEEL SPRING BOLT
3209 1-5/16" Std. 28.70
SLIDING SPRING BOLT
3410 1-5/16" Left 37.343411 1-5/16" Right 37.34
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key Retaining
* Option available only on Straight Boltand 3/8" Offset Bolt models.
N No 1.25Y* Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
26242636264826CL30243036304830CL
24242436244824CL28242836284828CL
5/8"
1-1/4"
2"
1-7/16"
5/32" DIA. TYP.CBA D E F
GL K L 2448 PN Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Gang Lock GL
Keymatic Line K5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SML
7/8"TYP.
1/4" TYP.
1-3/8"
2"1/16"
Gang Lock PackagesTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
CBA
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8"B 3/4"C 1-1/8"D 1-7/8"
GANG 3 C
GANG 3C A kit with threeadjustable stops, three 1-1/8" pins, three lock washers, and four closed bar guides.
Prices vary acco
rdin
gto
qu
antity o
rdered
.
A
B
C
D
E
F
Lock StyleGL Gang Lock
Core TypeK Keymatic
Housing Length PriceS 13/16" $25.51M 1-1/16" 27.48L 1-3/16" 30.18
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24" 7.75 2436 36" 9.10 2448 48" 19.9524CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24" 7.752636 36" 9.10 2648 48" 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24" 7.75 2836 36" 9.10 2848 48" 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24" 7.75 3036 36" 9.10 3048 48" 19.95 30CL Custom Call
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
FRONT MOUNT – SIDE VIEW
SIDE MOUNT (Shown with a Gang 3C Kit)
FRONT MOUNT – FRONT VIEW
FRONT MOUNT (Shown with a Gang 3C Kit)
All dimensions shown are in the locked position.
K6
DL36 Snap Bolt Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
CBA D E F
A
B
C
D
E
F
DL K M 36 PN N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Lock StyleDL Drawer/Door Lock
Core TypeK Keymatic
Housing LengthM 1-1/16"
Bolt Type PriceSNAP BOLT
36 3/4" $32.70
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.
Note: Keys are not included with this lock. See page K14 to order keys.
SNAP BOLT
ISOMETRIC VIEW
M
3/8”
STRIKE
1-1/8”.83
.83
1”
1”
7/8"
2"
1-7/16"
1-3/8"
53/64”REF.
1-5/8"
1-5/8"
5/32" DIA. TYP.
STRIKE SIDE VIEWSTRIKE FRONT VIEW
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL40
Keymatic Line K7
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F
PL K 40 S3 PN Y
Prices vary acco
rdin
g to
qu
antity o
rdered
.
A
B
C
D
E
F
ROUND EXTENDED SERIES (Plunger travels 9/16”)
R4R5R6R7
T1T3
T SERIES
R1R2R3
ROUND SERIES
S1S2S3
3/16" THRU TYP.
7/8" TYP.
1-1/2" TYP.1/2"
3/8"
1-1/4"TYP.
1/16" TYP.
7/8" TYP. 2"
1/8"
STRIKE PLATE
1/2"
1/16"
3/8"
1/4" EXTENSIONDIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSING
3/8" PLUNGERDIAMETER
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style40 Oval Flange
Plunger Type/Length PriceS SERIES
S1 3/8" $30.17S2 7/16" 29.95S3 5/8" 29.73
T SERIES
T1 1/4" 34.92T3 9/16" 34.81
ROUND SERIES
R1 3/8" 30.82R2 7/16" 30.55R3 9/16" 30.28
ROUND EXTENDED SERIES
R4 1-3/16" 35.63R5 1-5/16" 35.73R6 1-11/16" 35.84R7 2-7/16" 35.95
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
1-1/8"
1"
1"
S SERIES
All dimensions shown are in the locked position.
K8
PL45 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
R1R2R3
ROUND SERIES
3/8"
5/8"
1-1/8"
T1T3
1/8"
1/2"
1/16"
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F
PL K 45 S3 PN Y
A
B
C
D
E
F
Prices vary acco
rdin
g to
qu
antity o
rdered
.
R4R5R6R7
5/8"
1/4" EXTENSIONPIN DIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSING
PIN
3/8" PLUNGERDIAMETER
1-1/8"
ROUND EXTENDED SERIES (Plunger travels 9/16”)
S1S2S3
S SERIES
7/8" TYP.
1-1/4"
1/2"
3/8"
5/8"
#4-40 (STANDARD)
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style45 No Flange
Plunger Type/Length PriceS SERIES
S1 5/16" $30.75S2 7/16" 30.53S3 5/8" 30.31
T SERIES
T1 1/4" 35.49T3 9/16" 35.39
ROUND SERIES
R1 5/16" 31.40R2 7/16" 31.13R3 9/16" 30.85
ROUND EXTENDED SERIES
R4 1-3/16" 36.20R5 1-5/16" 36.31R6 1-11/16" 36.42R7 2-7/16" 36.53
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
T SERIES
All dimensions shown are in the locked position.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL49
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F
PL K 49 X PN Y
K8
Prices vary acco
rdin
gto
qu
antity o
rdered
.
A
B
C
D
E
F
THROUGH THE TRACK PLUNGER
1"
1/2"
7/16"
1/4"
5/8"
1/8"
1-3/16"
3/8"
1/8"
1/2"
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style Price49 Through the Track $64.97
Plunger
Plunger TypeX No Option
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
“Throw” (distance bolt travels from the locked to unlocked position) is 7/16".
All dimensions shown are in the locked position.
K9
K10
PL50 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
L3
3/8"
1-1/8"
1/8"
PARTS INCLUDED QTY.
a DOUGHNUT 1
b J BRACKET 1(anti-rotation)
c RUBBER WASHER 2
d PLASTIC SPACER 1
e SCREW 4
7/8"
1/8"
S1S2S3
7/8" TYP.
1-1/4" TYP.
1/2"
1/16" TYP. 1/2" TYP.
7/8" TYP.
3/8"
1-1/2" TYP.
1/8"
REAR GLASS
a
b
c
d
f
e
ac
dc
FRONT GLASS
c e
a DOUGHNUT
b J BRACKET (anti-rotation)
c RUBBER WASHER
d PLASTIC SPACER
e SCREW
f STRIKE PLATE
T SERIES INSTALLATION
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F
PL K 50 S3 PN Y
K9
S SERIES (Parts included same as Round Series)
Prices vary acco
rdin
g to
qu
antity o
rdered
.
A
B
C
D
E
F
B
C
D
R4R5R6R7
R1R2R3
1/4" EXTENSIONPIN DIAMETER
3/8" PLUNGERDIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSING
a DOUGHNUT 1
c RUBBER WASHER 2
d PLASTIC SPACER 1
e SCREW 4
PARTS INCLUDED QTY.
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style50 Round Flange
Plunger Type/Length PriceS SERIES
S1 3/8" $43.50 S2 7/16" 43.28 S3 5/8" 43.06
T SERIES
T1 1/4" 48.25 T3 9/16" 48.14
T SERIES
L3 3/8" 45.84
ROUND SERIES
R1 3/8" 44.15 R2 7/16" 43.88 R3 9/16" 43.61
ROUND EXTENDED SERIES
R4 1-3/16" 48.96 R5 1-5/16" 49.07 R6 1-11/16" 49.17 R7 2-7/16" 49.28
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
T1T3
STRIKE PLATE
1/8"
1/16"
1-1/8" TYP.
PARTS INCLUDED QTY.
a DOUGHNUT 2
b J BRACKET 1(anti-rotation)
c RUBBER WASHER 4
d PLASTIC SPACER 2
e SCREW 8
f STRIKE PLATE 1
ROUND SERIES (Plunger travels 9/16”)
L SERIES
T SERIES
All dimensions shown are in the locked position.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL51
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
All dimensions shown are in the locked position.
K10
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F
PL K 51 B6 PN N
Prices vary acco
rdin
gto
qu
antity o
rdered
.
A
B
C
D
E
F
SHORT PLUNGER
1-1/8"TYP.
B3,B4
1/8" TYP.
PLUNGERLENGTH
1"TYP.
5/8" TYP.
MATERIALTHICKNESS
1/4" TYP.
a
e
KEY HOLE LOCK – EXPLODED VIEW
a HOUSING
c RUBBER WASHER
d BACK PLATE
e MOUNTING SCREWS
MATERIAL
K11
cdc
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style51 Key Hole Lock
Material Thickness/Plunger PriceMATERIAL PLUNGER THICKNESS LENGTH
SHORT PLUNGER
B3 1/4" 3/4" Std. $34.95B4 3/8" 5/8" 35.05
LONG PLUNGER
B6 1/4" 1-1/2" Std. 33.89B7 3/8" 1-3/8" 33.99B8 7/8" 1-1/32" 34.09
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.Y Yes 0.00
Note: Keys are not included with this lock. See page K14 to order keys.
LONG PLUNGER
B6,B7,B8
PLUNGERLENGTH
MATERIALTHICKNESS
K12
ZL Z Bolt Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
K11
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F
ZL K 38 Z1 PN Y
Prices vary acco
rdin
gto
qu
antity o
rdered
.
A
B
C
D
E
F
Lock StyleZL Z Bolt Lock
Core TypeK Keymatic
Housing Style38 Sliding Door
Dead Bolt
Plunger Type/Length PriceSMALL HOUSING BOLT
Z1 5/16" Std. $28.10Z2 1/2" 28.43Z3 13/16" 28.65
LARGE HOUSING BOLT
Z5 5/16" Std. 45.65Z6 1/2" 45.98
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
Z1Z2Z3
9/16"
5/8"
1/8" BOLTTHICKNESS
5/8"7/8"
3/4"
3/4"1"
1"
7/16"
SMALL HOUSING
Z5Z6
LARGE HOUSING
1-3/16"
1/2"
1/8" BOLT THICKNESS
5/8"1-1/8"
1-7/16"
3/4" 1"
1-9/16"
7/16"
All dimensions shown are in the locked position.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Ratchet Lock RL
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
1" MINIMUM3-1/8" MAXIMUM
3/4" MAX. GLASS THICKNESS
1-1/16"
1-1/2"
4-1/4"
K12
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F
RL K 60 B1 PN N
Prices vary acco
rdin
gto
qu
antity o
rdered
.
A
B
C
D
E
F
ADJUSTABLE BAR B2
4-1/2"
1-1/4" TYP.
1-3/4" TYP.
11/16"
1/2" TYP.
1/4" MAX. GLASS THICKNESS
1-3/8" TYP.
1" MINIMUM3-3/8" MAXIMUM
1" 1-1/8"
5/8" TYP.
Lock StyleRL Ratchet Lock
Core TypeK Keymatic
Housing Style60 Ratchet
Bar Type PriceB1 Standard $25.59B2 Adjustable 30.74
Plating FinishPN Polished Nickel Std.SN Satin Nickel 0.95CF Custom Finish Call
Key RetainingN No Std.
Note: Keys are not included with this lock. See page K14 to order keys.
STANDARD BAR B1
K13
K14
KEY Keys 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
K13
Keymatic Tubular Keys
Keymatic locks utilize industry standard K137 tubular keys com-bined with non-industry standard size cuts. Standard tubularkeys are cut on a machine using a .156 diameter size cuttingblade; Kenstan uses a CNC milling machine and .093 size cutterto meet our tight tolerances and avoid cutting the key tip anddegrading the key. A typical lock shop may be capable of pro-ducing a workable duplicate key, but the Kenstan warranty willbe void if our Factory Original keys are not used with our locks.Use of unauthorized duplicates will inevitably cause the lock tobecome misaligned and possibly suffer irreversible damage.
Kenstan Original Keymatic operating keys and Change Tools can be ordered by referencing the stamp number on the keys.The first two letters represent a manufacturing date code andthe next 3 or 4 numbers represent the Keymatic key code. The final dash and number from 1 to 8 represent the settingwithin the key code for operating keys only. All operating keysstarting in late 2003 come standard with a colored key coverrepresenting dash numbers 1 thru 8. The Change Tool does nothave the final dash and number; the large red stop sign shapedcover notes the special purpose of changing the Keymatic locksetting only.
If keys have been lost or stolen, you can reference the Keymaticcode number stamped on the lock housings, cams or bolts.
OPERATING KEY # 02 (Blue)OPERATING KEY # 01 (Orange)
OPERATING KEY # 04 (Green)OPERATING KEY # 03 (Yellow)
OPERATING KEY # 06 (Pink)OPERATING KEY # 05 (White)
OPERATING KEY # 08 (Tan)OPERATING KEY # 07 (Purple)
RED CHANGE TOOL TOOL
CBA D
KEY K 01 XXXX
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ItemKEY Key
Core TypeK Keymatic
Operating Key/Change Tool Price01 Orange $3.6502 Blue 3.6503 Yellow 3.6504 Green 3.6505 White 3.6506 Pink 3.6507 Purple 3.6508 Tan 3.65TOOL Red Change Tool 6.65
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Biaxial Pin Line of Locks featuring Medeco® Core
Med
eco® C
ore
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Ratchet Lock
Core Lock
Keys
M3
M2
M4
M5
M10
M9
M8
M7
M12
M13
M14
M1
M6
M11
2008
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
Biaxial Pin Line of Locks featuring Medeco® Core
The M line offers superior security in a variety of showcase and cabinetlocks with thousands of high-security precision cut key combinations.Some M line locks are also available in a Removable Core version.
Locks can be keyed alike, individually or in groups and can be masteror grand master keyed. The unique double-locking mechanism rendersour cylinders virtually pick-proof.
DeliveryAt Kenstan, we assemble every lock to order and strive to meet yourrequested in-house date. Our standard lead time is to ship within 2weeks from the receipt of your order. Rush order and emergency ser-vices are available.
PlatingThe M line standard plating finish is Polished Nickel housing with aSatin Chrome core.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including Polished Brass, Satin Brass, Statuary Bronze, Matte Black andCustom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes – callfor pricing.
Key Control and Resistance to Attack The security of any locking system depends on two critical factors:physical strength against picking/drilling/forcing and controlling duplication of existing keys. The M line has countered these by the fol-lowing:
• Hardened steel inserts were added to protect the keyway, shear lineand sidebar areas.
• Biaxial locks employ offset chisel-pointed pins to make picking virtually impossible.
• M line keys must be cut on special key cutting machines that repro-duce the angled cuts to match the Biaxial chisel point pins.
• Every M line key blank is accounted for and its release controlled bythe factory and marked for end-user identification.
• We will process extra key orders only with an authorized signature.
Key Retaining vs. Non-Key Retaining Lock FunctionThe M line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
M locks can also be supplied as non-key retaining (non-captive), whichallows the key to be removed in both the locked and unlocked posi-tion.
Designer Note: For ttrruuee captive operation, the use of our captive keylocks must be coordinated with sliding door showcase design. Theuse of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrict doormovement and ensure key removal only when the doors are in thesseeccuurree position.
PN Polished Nickel
Introduction
M12008
Price List and Data Sheet
Biaxial Pin LineMedeco® Core
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F G H I J
CL H 05 1203 PN Y Y Y N 106
A
B
C
D
E
F
G
I
H
Cam Type Price
STRAIGHT (ST)
101 5/8" $ 0.00 102 3/4" 0.00103 7/8" 0.00104 1" 0.00105 1-1/8" 0.00106 1-1/4" Std.107 1-3/8" 0.45108 1-1/2" 0.45110 1-3/4" 0.45112 2" 0.50116 2-1/2" 0.50
1/8" OFFSET
303 7/8" 0.60306 1-1/4" 0.65308 1-1/2" 0.65312 2" 0.70
1/4" OFFSET
403 7/8" 0.60404 1" 0.65406 1-1/4" 0.65408 1-1/2" 0.65410 1-3/4" 0.65412 2" 0.70414 2-1/4" 0.70
3/8" OFFSET
504 1" 0.65506 1-1/4" 0.65508 1-1/2" 0.65512 2" 0.70
1/2" OFFSET
606 1-1/4" 0.65608 1-1/2" 0.65610 1-3/4" 0.65612 2" 0.70
5/8" OFFSET
712 2" 2.00
HOOK (HK)
202 3/4" 0.60204 1" 0.65206 1-1/4" 0.65208 1-1/2" 0.65210 1-3/4" 0.65
CUSTOM CAM
CL Call
J
Prices vary acco
rdin
g to
qu
antity o
rdered
.
Note: All Cam Locks come with a 1-1/4" Straight Cam unless a different cam is chosen.
*Not available in Removable Core.
Lock StyleCL Cam Lock
Core Type PriceM Biaxial Medeco® $ 0.00H Biaxial Medeco® m3 Std.R Removable Core 6.15G Removable Core 6.15
Medeco® m3
Housing LengthMAXIMUMMATERIAL BARREL THICKNESS LENGTH
02 3/8" 11/16" 35.0203 5/8" 7/8" 35.0204 7/8" 1-1/8" 35.0205* 1-1/4" 1-1/2" 35.0210 1-5/8" 1-13/16" 49.7611 1-13/16" 2" 49.7612* 2-1/8" 2-3/8" 49.7613 2-1/2" 2-13/16" 52.7014 2-11/16" 3" 52.7015* 3" 3-3/8" 52.70
Cam RotationLOCKED OPEN
0312 3 120306 3 60309 3 90612 6 120603 6 30609 6 90912 9 120903 9 30906 9 61203 12 31206 12 61209 12 9
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN* No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
Biaxial Pin LineMedeco® Core
5/8" FLATS7/8"TYP.
5/8"
7/8" TYP.
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
3/4"
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Cam Lock CL
M3
HOUSING LENGTH 04 and 05
1/4"
HOUSING LENGTHS 10, 11, 12, 13, 14 and 15
WASHER
1-1/4"TYP.1-1/4"
7/8" EXTENSION SLEEVEANTI-ROTATION PLATE
FACE SLEEVE
SCREW
CAM ROTATIONS (Front of lock shown)
LOCKED @12OPEN @9
LOCKED @12OPEN @3
LOCKED @12OPEN @6
LOCKED @12OPEN @6
12
9 3
6
LENGTH
OFFSET DIM
LENGTH
HOUSING LENGTHS 02 and 03
2008Price List and Data Sheet
Cam Type
LENGTH
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
BARREL LENGTH
MAXIMUM MATERIALTHICKNESS
CAM LOCK GLASS INSTALLATION PACKAGE (See Accessories page A8 for prices)
1/8"
5/8" FLATS7/8"TYP.
02 = 1/2" 03 = 3/8"
HORIZONTALFLATS
10 and 13 = 1/2" 11, 12 and 15 = 3/8"
All 180 degree rotations are clockwise, unless specified.
METAL INSTALLATION WITH OFFSET CAM
GLASS INSTALLATION WITH HOOK CAM
WOOD INSTALLATION WITH STRAIGHT CAM
Note: All cams are reversible.
STRAIGHT CAM
ANTI-ROTATIONTHREE TABMOUNTING PLATE(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
MOUNTINGSCREWSREQUIRED(NOT INCLUDED)
CAMADAPTER
SMALL THREETAB WASHER
NUT
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
CAMADAPTER
NUT
CAMADAPTER
OFFSET CAM
SMALL THREETAB WASHER
SMALL THREETAB WASHER
NUT
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TOPREVENT NUT FROMBACKING OUT)
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
CALL KENSTAN FOR LOCK ILLUSTRATION.
Straight Cam Offset Cam Hook Cam
GLASS
a METAL WASHER 2
b J BRACKET 1(anti-rotation)
c PLASTIC WASHER 1(adhesive)
d RUBBER WASHER 1
PART QTY.
dcb
a
a
HOOK CAM
“Throw” (distance bolt travels from the locked to unlocked position) is 5/16".
All dimensions shown are in the locked position.
Prices vary acco
rdin
g to
qu
antity o
rdered
.
34103411 (shown)
5/8"
1-5/16"
22051-1/4"
1/8"
3/8"
3208
5/16"
3/8"
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
or d
er keys.
M4
DL Drawer/Door Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Biaxial Pin LineMedeco® Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D E F G H I
A
B
C
D
E
F
G
I
H
STRAIGHT BOLT
3209
3/8" OFFSET BOLT
STEEL SPRING BOLT (3/16” bolt engagement recommended)
STEEL SPRING BOLT (3/16” bolt engagement recommended)
SLIDING SPRING BOLT
DL H S 3209 PN N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
5/16"
3/8"3/4"
2001200220032004
SML
1/4" TYP.
1-3/8" TYP.
7/8"TYP.
2"
1-7/16"
5/8"
5/32" DIA. TYP.
*Not available in Removable Core.
Lock StyleDL Drawer/Door Lock
Core Type PriceM Biaxial Medeco® $ 0.00H Biaxial Medeco® m3 Std.R Removable Core 6.15 G Removable Core 6.15
Medeco® m3
Housing LengthS* 13/16" 0.00 M* 1-1/16" 1.23L 1-3/16" 2.50
Bolt TypeSTRAIGHT BOLT
2001 1-1/16" 44.942002 1-11/16" 45.042003 2-5/16" 45.152004 3-1/8" 45.26
3/8" OFFSET BOLT
2205 1-5/8" 45.58
STEEL SPRING BOLT
3208 1-5/16" 47.10
STEEL SPRING BOLT
3209 1-5/16" Std. 47.10
SLIDING SPRING BOLT
3410 1-5/16" Left 55.573411 1-5/16" Right 55.57
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key Retaining
* Option available only on Straight Bolt and 3/8" Offset Bolt models.
N No 1.50Y* Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
NO
TE
: Keys ar e no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Gang Lock GL
M5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Biaxial Pin LineMedeco® Core
SML
7/8" TYP.
1/4"
1-3/8"
2"1/16"
5/8"
1-1/4"
2"
1-7/16"
5/32" DIA. TYP.
26242636264826CL30243036304830CL
FRONT MOUNT – SIDE VIEW
SIDE MOUNT (Shown with a Gang 3C Kit)
24242436244824CL28242836284828CL
FRONT MOUNT – FRONT VIEW
FRONT MOUNT (Shown with a Gang 3C Kit)
Gang Lock PackagesTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
CBA
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8"B 3/4"C 1-1/8"D 1-7/8"
GANG 3 C
GANG 3C A kit with threeadjustable stops, three 1-1/8" pins, three lock washers, and four closed bar guides.
Prices vary acco
rdin
gto
qu
antity o
rdered
.
GL H S 2448 PN Y Y Y N
CBA D E F G H I
A
B
C
D
E
F
G
H
I
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
*Not available in Removable Core.
Lock StyleGL Gang Lock
Core Type PriceM Biaxial Medeco® $ 0.00H Biaxial Medeco® m3 Std.R Removable Core 6.15 G Removable Core 6.15
Medeco® m3
Housing LengthS* 13/16" 44.46M* 1-1/16" 45.69L 1-3/16" 46.95
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24" 7.75 2436 36" 9.10 2448 48" 19.95 24CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24" 7.752636 36" 9.10 2648 48" 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24" 7.75 2836 36" 9.10 2848 48" 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24" 7.75 3036 36" 9.10 3048 48" 19.95 30CL Custom Call
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
Prices vary acco
rdin
g to
qu
antity o
rdered
.N
OT
E: K
eys are not includ
ed w
ith this lock.
See p
age M
14 to o
rder keys.
M6
DL36 Snap Bolt Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Biaxial Pin LineMedeco® Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D E F G H I
A
B
C
D
E
F
G
I
H
DL H M 36 PN N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Lock StyleDL Drawer/Door Lock
Core Type PriceM Biaxial Medeco® $ 0.00H Biaxial Medeco® m3 Std.R Removable Core 6.15 G Removable Core 6.15
Medeco® m3
Housing LengthM* 1-1/16" Std.L 1-3/16" 2.50
Bolt TypeSNAP BOLT
36 3/4" 51.10
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
SNAP BOLT
ISOMETRIC VIEW
All dimensions shown are in the locked position.
ML
3/8”
STRIKE
1-1/8”
1”
1”
.83
.83
7/8"
2"
1-3/8"
1-7/16"
1-5/8"
1-5/8"
53/64”REF.
5/32" DIA. TYP.
STRIKE FRONT VIEW STRIKE SIDE VIEW
*Not available in Removable Core.
NO
TE
: Keys ar e no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL40
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Biaxial Pin LineMedeco Core
S1S2S3
3/16"
7/8" TYP.
1-1/2" 1/2"
3/8"1/16" TYP.
7/8"TYP.
2"
HOUSINGLENGTH
MHR
M6
Biaxial Pin LineMedeco® Core
CBA D E F G H I
A
B
C
D
E
F
G
I
H
PL H 40 S3 PN Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
ROUND EXTENDED SERIES (Plunger travels 9/16”)
R4R5R6R7
T1T3
T SERIES
R1R2R3
ROUND SERIES
S SERIES
1/8"
STRIKE PLATE
1/2"
1/16"
3/8"
1/4"EXTENSIONPIN DIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSING
3/8" PLUNGERDIAMETER
MH
MH
HOUSINGLENGTH
All dimensions shown are in the locked position.
M7
Lock StylePL Plunger Lock
Core Type PriceM Biaxial Medeco® $ 0.00
1-1/4" Housing Length
H Biaxial Medeco® m3 Std.1-1/4" Housing Length
R Removable Core 6.151-5/8" Housing Length
G Removable Core m3 6.151-5/8" Housing Length
Housing Style40 Oval Flange
Plunger Type/LengthS SERIES
S1 3/8" 46.55S2 7/16" 46.34S3 5/8" 46.13
T SERIES
T1+ 1/4" 51.22T3+ 9/16" 51.11
ROUND SERIES
R1* 3/8" 47.20R2* 7/16" 46.93R3* 9/16" 46.66
ROUND EXTENDED SERIES
R4* 1-3/16" 51.91R5* 1-5/16" 52.02R6* 1-11/16" 52.12R7* 2-7/16" 52.23
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
*Not available in Removable Core.
1-5/8”
+ Available only in 1-5/8” Housing Length (Call for custom Housing)
Patented
M8
PL45 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Biaxial Pin LineMedeco Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.
M7
Biaxial Pin LineMedeco® Core
CBA D E F G H I
A
B
C
D
E
F
G
I
H
PL H 45 S3 PN Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Prices vary acco
rdin
g to
qu
antity o
rdered
.
R1R2R3
ROUND SERIES
R4R5R6R7
ROUND EXTENDED SERIES (Plunger travels 9/16”)
S1S2S3
S SERIES
7/8" TYP. 1/2"
3/8"
5/8"
#4-40 (STANDARD)
3/8"
5/8"
5/8"
1/4" EXTENSIONPIN DIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSINGPIN
3/8" PLUNGERDIAMETER
T1T3
1/8"
1/16"
1/2"
T SERIES
HOUSINGLENGTH
MR
HOUSINGLENGTH
MH
MH
All dimensions shown are in the locked position.
*Not available in Removable Core.
1-5/8”
+ Available only in 1-5/8” Housing Length (Call for custom Housing)
Patented
Lock StylePL Plunger Lock
Core Type PriceM Biaxial Medeco® $ 0.00
1-1/4" Housing Length
H Biaxial Medeco® m3 Std.1-1/4" Housing Length
R Removable Core 6.151-5/8" Housing Length
G Removable Core m3 6.151-5/8" Housing Length
Housing Style45 No Flange
Plunger Type/LengthS SERIES
S1 5/16" 47.20S2 7/16" 46.98S3 5/8" 46.77
T SERIES
T1+ 1/4" 51.86T3+ 9/16" 51.76
ROUND SERIES
R1* 5/16" 47.84R2* 7/16" 47.57R3* 9/16" 47.30
ROUND EXTENDED SERIES
R4* 1-3/16" 52.55R5* 1-5/16" 52.66R6* 1-11/16" 52.77R7* 2-7/16" 52.87
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL49
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Biaxial Pin LineMedeco Core
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
M8
Biaxial Pin LineMedeco® Core
1-3/8"
PL H 49 X PN Y Y Y N
CBA D E F G H I
A
E
F
G
I
H
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
B
C
D
Lock StylePL Plunger Lock
Core Type PriceM Biaxial Medeco® $0.00 H Biaxial Medeco® m3 Std.
Housing Style49 Through the Track $67.00
Plunger
Plunger TypeX No Option
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
THROUGH THE TRACK PLUNGER
All dimensions shown are in the locked position.
5/8"
7/8"
1/4"
1/8"
1/2"
7/16"
7/16" 3/8"
1/2"
3/8"
M9
Patented
M10
PL50 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Biaxial Pin LineMedeco Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Biaxial Pin LineMedeco® Core
M9
S1S2S3
7/8" TYP.
1/16" TYP.1/2" TYP.
7/8" TYP.
3/8"
1-1/2" TYP.
1/8"
HOUSINGLENGTH M
HR
T1T3
STRIKEPLATE
1/8"
1/16"
PARTS INCLUDED QTY.
a DOUGHNUT 2
b J BRACKET 1(anti-rotation)
c RUBBER WASHER 4
d PLASTIC SPACER 2
e SCREW 8
f STRIKE PLATE 1
HOUSINGLENGTH
L3
7/8"3/8"
1/8" PARTS INCLUDED QTY.
a DOUGHNUT 1
b J BRACKET 1(anti-rotation)
c RUBBER WASHER 2
d PLASTIC SPACER 1
e SCREW 4
MH
1/8"
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.
REAR GLASS
a
b
c
d
f
e
ac
dc
FRONT GLASS
c
e
a DOUGHNUT
b J BRACKET (anti-rotation)
c RUBBER WASHER
d PLASTIC SPACER
e SCREW
f STRIKE PLATE
Prices vary acco
rdin
g to
qu
antity o
rdered
.
PL H 50 S3 PN Y Y Y N
CBA D E F G H I
A
E
F
G
I
H
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
B
C
D
ROUND SERIES (Plunger travels 9/16”)
L SERIES
R4R5R6R7
R1R2R3
3/8" PLUNGERDIAMETER
EXTENSION PIN WILL NOT RETRACTINTO HOUSING
a DOUGHNUT 1
c RUBBER WASHER 2
d PLASTIC SPACER 1
e SCREW 4
PARTS INCLUDED QTY.
MH 1/4" EXTENSION
PIN DIAMETER
T SERIES INSTALLATION
T SERIES
S SERIES (Parts included same as Round Series)
All dimensions shown are in the locked position. Patented
Lock StylePL Plunger Lock
Core Type PriceM Biaxial Medeco® $ 0.00
1-1/4" Housing Length
H Biaxial Medeco® m3 Std.1-1/4" Housing Length
R Removable Core 6.151-5/8" Housing Length
G Removable Core m3 6.151-5/8" Housing Length
Housing Style50 Round Flange
Plunger Type/LengthS SERIES
S1 3/8" 59.71 S2 7/16" 59.49 S3 5/8" 59.28
T SERIES
T1+ 1/4" 64.37 T3+ 9/16" 64.27
L SERIES
L3* 3/8" 62.01
ROUND SERIES
R1* 3/8" 60.35 R2* 7/16" 60.08 R3* 9/16" 59.82
ROUND EXTENDED SERIES
R4* 1-3/16" 65.06 R5* 1-5/16" 65.17 R6* 1-11/16" 65.28 R7* 2-7/16" 65.39
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
*Not available in Removable Core.
1-5/8”
+ Available only in 1-5/8” Housing Length (Call for custom Housing)
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL51
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Biaxial Pin LineMedeco Core
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
PL H 51 B6 PN N Y Y N
CBA D E F G H I
A
E
F
G
I
H
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
B
C
D
M11
Lock StylePL Plunger Lock
Core Type PriceM Biaxial Medeco® $0.00H Biaxial Medeco® m3 Std.
Housing Style51 Key Hole Lock
Material Thickness/PlungerMATERIAL PLUNGER THICKNESS LENGTH
SHORT PLUNGER
B3 1/4" 3/4" Std. 49.88B4 3/8" 5/8" 49.98
LONG PLUNGER
B6 1/4" 1-1/2" Std. 48.82B7 3/8" 1-3/8" 48.92B8 7/8" 1-1/32" 49.02
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.Y Yes 0.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
All dimensions shown are in the locked position.
SHORT PLUNGER
1-1/8"TYP.
B3,B4
1/8" TYP.
PLUNGERLENGTH
1"TYP.
5/8" TYP.
MATERIALTHICKNESS
1/4" TYP.
a
e
KEY HOLE LOCK – EXPLODED VIEW
a HOUSING
c RUBBER WASHER
d BACK PLATE
e MOUNTING SCREWS
MATERIAL
cdc
LONG PLUNGER
B6,B7,B8
PLUNGERLENGTH
MATERIALTHICKNESS
M12
RL Ratchet Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Biaxial Pin LineMedeco® Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
1" MINIMUM3-1/8" MAXIMUM
3/4" MAX. GLASS THCKNSS
1-1/16"
1-1/2"
4-1/4"
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
ADJUSTABLE BAR B2
RL H 60 B1 PN N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Lock StyleRL Ratchet Lock
Core Type PriceM Biaxial Medeco® Std.H Biaxial Medeco® m3 $ 3.38
Housing Style60 Ratchet
Bar TypeB1 Standard $47.24B2 Adjustable 51.26
Plating FinishPN Polished Nickel Std.
w/Satin Chrome Core
PB Polished Brass 3.35CF Custom Finish Call
Key RetainingN No Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
4-1/2"
1-1/4" TYP.
1-3/4" TYP.
11/16"
1/2" TYP.
1/4" MAX. GLASS THICKNESS
1-3/8" TYP.
1" MINIMUM3-3/8" MAXIMUM
3/8"
1-3/16"
5/8" TYP.
STANDARD BAR B1
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Core COR
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Biaxial Pin LineMedeco Core
NO
TE
: Keys are no
t included
with this C
ore.
See p
age M
14 to o
rder keys.
COR G 4 K SC R Y Y N
CBA D E F G H I
A
E
F
G
I
H
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
B
C
D
Medeco®
USED ON THE FOLLOWING REMOVABLE CORE LOCK TYPES:
-CAM LOCKS
-DRAWER/DOOR LOCKS
-GANG LOCKS
-DL36 SNAP BOLT LOCK
-PL40 PLUNGER LOCKS
-PL45 PLUNGER LOCKS
-AND
-PL50 PLUNGER LOCKS
M13
Lock StyleCOR Removable Core
Core Type PriceR Removable Core $15.10
G Removable Core $15.10Medeco® m3
Number of Pins4 Standard 4 Pin
KeywayK Kenstan Std.O Other Call
Plating FinishSC Satin Chrome Std.PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RotationR RightL Left (For Cam lock only)
Keyed DifferentN No Std.Y Yes 0.45
Stamp CoreN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
M14
KEY Keys 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Biaxial Pin LineMedeco Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
M11
Biaxial Pin LineMedeco® Core
Medeco® Keys
Our Medeco® High Security cabinet lock keys are made from aspecial nickel silver alloy. Bitted Medeco® keys must be preciselycut to exact depths and angles, and require special duplicatingmachines. The key blanks are considered restricted, factory controlled and never sold as uncut blanks. Duplicate keys cannot be made without the written signature consent and driverslicense identification of the Authorized Purchasing Personnel.The patented key programs prevent the unauthorized duplicationof keys and maintain system integrity.
Beginning in 2005, the new Medeco3® technology will also beavailable in the Medeco® cores featured in Kenstan locks. Thisunique design provides triple locking action, making the locksvirtually pick-proof. All Medeco3® keys and locks are protectedunder patent, trademark and copyright laws. As with ourStandard Medeco® Biaxial keys, the Medeco3® keys may only be duplicated by our factory.
Additional Medeco® restricted keys can only be ordered underthe original signature authorized users who initiated the keyingplan. Kenstan Original Keys can be ordered by referencing thestamp number on the key. Operating keys may be stamped with the key number itself (AA23, AC75 and so on) or may be a stamp number representing a key number (such as a 2 stamprepresenting AC75). Master keys will have an M or Masterengraved on the key bow. Core Removal keys in our RemovableCore (R) version will be engraved with C or Control on the keybow.
If keys have been lost or stolen, we can reference the stampnumber on the lock housings, cams or bolts if available.
A
B
C
D
CBA D
KEY M O XXXX
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Biaxial m3 Key Photo shown
ItemKEY Key
Core TypeM Biaxial Medeco®
H Biaxial Medeco® m3
R Removable Core G Removable Core
Medeco® m3
Key Function PriceO Operating $4.75M Master 4.75G Grand Master 4.75C Control 4.75
For Removable Core
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
ASSA® Line of Locks
S
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Keys
S3
S2
S4
S5
S7
S8
S9
S1
S6
SA
SS
A®
2008
Introduction
ASSA® Desmo Line S12008
Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SS
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SC Satin Chrome
ASSA® Desmo Line of Locks
The S line offers high security in a variety of showcase and cabinetlocks with thousands of high-security precision cut key combina-tions.
Locks can be keyed alike, individually or in groups and can be mas-ter keyed.
DeliveryAt Kenstan, we assemble every lock to order and strive to meetyour requested in-house date. Our standard lead time is to shipwithin 2 weeks from the receipt of your order. Rush order andemergency services are available.
PlatingThe S line standard plating finish is Polished Chrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including Satin Chrome, Polished Brass, Satin Brass, Statuary Bronze, MatteBlack and Custom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes –call for pricing.
Resistance to Attack and Key ControlOur S line showcase and cabinet locks offer direct drive pin technol-ogy and are designed to offer a high level of physical security. Thecylinder locking mechanism is uniquely designed to offer smoothoperation and long life. It is nearly impossible to pick these locksusing standard techniques. We can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain ahistorical database of key numbers. For security reasons, duplica-tion of S keys for locks purchased originally from Kenstan can onlybe obtained through Kenstan with an authorized signature. Keyblanks are never sold.
Key Retaining Lock FunctionThe S line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
Non-Key Retaining Lock FunctionSome S Cam locks can also be supplied as non-key retaining (non-captive), which allows the key to be removed in both the locked andunlocked position.
Designer Note: For ttrruuee captive operation, the use of our captivekey locks must be coordinated with sliding door showcase design.The use of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrictdoor movement and ensure key removal only when the doors are inthe sseeccuurree position.
PC Polished Chrome
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e S9 to
ord
er keys.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F G H I J
CL S 04 1203 PC Y Y Y N 106
A
B
C
D
E
F
G
I
H
Cam Type Price
STRAIGHT (ST)
101 5/8" $ 0.00 102 3/4" 0.00103 7/8" 0.00104 1" 0.00105 1-1/8" 0.00106 1-1/4" Std.107 1-3/8" 0.45108 1-1/2" 0.45110 1-3/4" 0.45112 2" 0.50116 2-1/2" 0.50
1/8" OFFSET
303 7/8" 0.60306 1-1/4" 0.65308 1-1/2" 0.65312 2" 0.70
1/4" OFFSET
403 7/8" 0.60404 1" 0.65406 1-1/4" 0.65408 1-1/2" 0.65410 1-3/4" 0.65412 2" 0.70414 2-1/4" 0.70
3/8" OFFSET
504 1" 0.65506 1-1/4" 0.65508 1-1/2" 0.65512 2" 0.70
1/2" OFFSET
606 1-1/4" 0.65608 1-1/2" 0.65610 1-3/4" 0.65612 2" 0.70
5/8" OFFSET
712 2" 2.00
HOOK (HK)
202 3/4" 0.60204 1" 0.65206 1-1/4" 0.65208 1-1/2" 0.65210 1-3/4" 0.65
CUSTOM CAM
CL Call
J
Prices vary acco
rdin
g to
qu
antity o
rdered
.
All Cam Locks come with a 1-1/4" Straight Cam unless a different cam is chosen.
Lock StyleCL Cam Lock
Core TypeS ASSA® Desmo
Housing Length PriceMAXIMUMMATERIAL BARREL THICKNESS LENGTH
02 9/32" 5/8" $38.2003* 1/2" 7/8" 38.3904 3/4" 1-1/8" 38.5810* 1-3/8" 1-3/4" 53.1311 1-9/16" 2" 53.3213* 2-1/4" 2-3/4" 56.0714 2-7/16" 3" 56.26
Cam RotationLOCKED OPEN
0312 3 120306 3 60309 3 90612 6 120603 6 30609 6 90912 9 120903 9 30906 9 61203 12 31206 12 61209 12 9
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15
*Available in Key Retaining only.
All 180 degree rotations are clockwise, unless specified.
Note: When the non key retaining function is chosen inconjunction with a 90 degree cam rotation, the key will beinserted at a 45 degree angle.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Cam Lock CL
ASSA® Desmo Line S3SS
Straight Cam Offset Cam Hook Cam
HOUSING LENGTHS 10, 11, 13 and 14WASHER
1-1/4"TYP.
1-1/4"TYP.
7/8" EXTENSION SLEEVE
ANTI-ROTATION PLATE
FACE SLEEVE
SCREW
CAM ROTATIONS (Front of lock shown)
LOCKED @12OPEN @9
LOCKED @12OPEN @3
LOCKED @12OPEN @6LOCKED @12
OPEN @6
12
9 3
6
LENGTH
OFFSET DIM
LENGTH
HOUSING LENGTHS 02, 03 and 04
1/8"TYP.
5/8"7/8"TYP.
5/8"TYP.
7/8"TYP.
3/4".
2008Price List and Data Sheet
Cam Type
LENGTH
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESS
CAM LOCK GLASS INSTALLATION PACKAGE (See Accessories page A8 for prices)
HORIZONTALFLATS
All 180 degree rotations are clockwise, unless specified.
a
a
GLASS
a METAL WASHER 2
b J BRACKET 1(anti-rotation)
c PLASTIC WASHER 1(adhesive)
d RUBBER WASHER 1
PART QTY.
b
dc
02 = 5/8" 03 = 3/8"04 = 1/8"
10 and 13 = 1/2" 11 and 14 = 1/4"
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
METAL INSTALLATION WITH OFFSET CAM
GLASS INSTALLATION WITH HOOK CAM
WOOD INSTALLATION WITH STRAIGHT CAM
Note: All cams are reversible.
STRAIGHT CAM
ANTI-ROTATIONTHREE TABMOUNTING PLATE(TABS BENT OVER TO PRE-VENT NUT FROM BACKINGOUT)
MOUNTINGSCREWSREQUIRED(NOT INCLUDED)
CAMADAPTER
SMALL THREETAB WASHER
NUT
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PRE-VENT NUT FROM BACKINGOUT)
CAMADAPTER
NUT
CAMADAPTER
OFFSET CAM
SMALL THREETAB WASHER
SMALL THREETAB WASHER
NUT
HOOK CAM
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PRE-VENT NUT FROM BACKINGOUT)
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
CALL KENSTAN FOR LOCK ILLUSTRATION.
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e S9 to
or d
er keys.
S4
DL Drawer/Door Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
ASSA® Desmo Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SS
Prices vary acco
rdin
g to
qu
antity o
rdered
.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
STRAIGHT BOLT
2001200220032004
2205
3208
3209
3/8" OFFSET BOLT
STEEL SPRING BOLT (3/16” bolt engagement recommended)
STEEL SPRING BOLT (3/16” bolt engagement recommended)
34103411 (shown)
SLIDING SPRING BOLT
“Throw” (distance bolt travels from the locked to unlocked position) is 7/16".
All dimensions shown are in the locked position.
DL S M 2002 PC Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
M
5/16"
3/8"
5/16"
3/8"3/4"
1-5/16"
1-1/4"
1/8"
3/8"
1/4" TYP.
1/4"
1-3/8" TYP.7/8"
TYP.
2" TYP.
1-7/16"TYP.
*HEADTHICKNESS
5/8"TYP.
5/32" DIA. TYP.
Lock StyleDL Drawer/Door Lock
Core TypeS ASSA® Desmo
Housing Length PriceM 15/16" Std.
Bolt TypeSTRAIGHT BOLT
2001 1-1/8" $53.952002 1-3/4" 54.052003 2-3/8" 54.152004 3-3/16" 54.25
3/8" OFFSET BOLT
2205 1-11/16" 54.55
STEEL SPRING BOLT
3208 1-3/8" 56.05
STEEL SPRING BOLT
3209 1-3/8" Std. 56.05
SLIDING SPRING BOLT
3410 1-3/8" Left 64.503411 1-3/8" Right 64.50
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key Retaining
* Option available only on Spring Boltmodels.
N* No 0.00Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y* Yes 2.15
*For Master Keyed locks, the Head Thickness is 5/8”.
Pat. Pending
Prices vary acco
rdin
gto
qu
antity o
rdered
.N
OT
E: K
eys are not includ
ed w
ith this lock.
See p
age S
9 to o
rder keys.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Gang Lock GL
ASSA® Desmo Line S5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SS
M
7/8"TYP.
1/4" TYP.
1/4" TYP.
*HEADTHICKNESS
1-3/8"
2"1/16"
5/8"
1-1/4"
2"TYP.
1-7/16"TYP.
5/32" DIA. TYP.
26242636264826CL30243036304830CL
FRONT MOUNT – SIDE VIEW
SIDE MOUNT (Shown with a Gang 3C Kit)
24242436244824CL28242836284828CL
FRONT MOUNT – FRONT VIEW
FRONT MOUNT (Shown with a Gang 3C Kit)
Gang Lock PackagesTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
CBA
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8"B 3/4"C 1-1/8"D 1-7/8"
GANG 3 C
GANG 3C A kit with threeadjustable stops, three 1-1/8" pins, three lock washers, and four closed bar guides.
GL S M 2424 PC Y Y Y N
CBA D E F G H I
A
B
C
D
E
F
G
H
I
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Lock StyleGL Gang Lock
Core TypeS ASSA® Desmo
Housing Length PriceM 15/16" $53.47
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24" 7.75 2436 36" 9.10 2448 48" 19.95 24CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24" 7.752636 36" 9.10 2648 48" 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24" 7.75 2836 36" 9.10 2848 48" 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24" 7.75 3036 36" 9.10 3048 48" 19.95 30CL Custom Call
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingY Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y* Yes 2.15
*For Master Keyed locks, the Head Thickness is 5/8”.
Pat. Pending
S6
DL36 Snap Bolt Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
ASSA® Desmo Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SS
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e S9 to
ord
er keys.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
STRAIGHT BOLT
ISOMETRIC VIEW
All dimensions shown are in the locked position.
DL S M 36 PC N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
M
3/8”
STRIKE
1-1/8”
*HEADTHICKNESS
1”
1”
.83
7/8"
1/4”
2"
1-3/8"
1-7/16"
1-5/8"
1-5/8"
53/64”REF.
5/32" DIA. TYP.
Lock StyleDL Drawer/Door Lock
Core TypeS ASSA® Desmo
Housing LengthM 15/16"
Bolt Type PriceSNAP BOLT
36 3/4" $59.95
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y* Yes 2.15
STRIKE FRONT VIEW STRIKE SIDE VIEW
Prices vary acco
rdin
gto
qu
antity o
rdered
.
*For Master Keyed locks, the Head Thickness is 5/8”.
Pat. Pending
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL40
ASSA® Desmo Line S7
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SS
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e S9 to
ord
er keys.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
PL S 40 S3 PC Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
S SERIES
S1S2S3
3/16" THRU TYP.7/8"
1-1/2"1/2"
3/8"
1-1/4”
1/4”
*HEADTHICKNESS
1/16”
7/8"2"
All dimensions shown are in the locked position.
Prices vary acco
rdin
gto
qu
antity o
rdered
.
*For Master Keyed locks, the Head Thickness is 5/8”.
Lock StylePL Plunger Lock
Core TypeS ASSA® Desmo
Housing Style40 Oval Flange
Plunger Type/Length PriceS SERIES
S1 3/8" $53.48S2 7/16" $53.38S3 5/8" $53.28
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No StdY Yes 1.50
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y* Yes 2.15
Pat. Pending
S8
PL50 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
ASSA® Desmo Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SS
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e S9 to
ord
er keys.
S1S2S3
S SERIES (Parts included same as Round Series)
7/8”
1-1/4”
1/2"
1/16"
*HEADTHICKNESS
1-1/8”1/2"
7/8"
3/8"
1-1/2"
1/8"
PL S 50 S3 PC Y Y Y N
CBA D E F G H I
A
B
D
E
F
G
I
H
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
B
C
PLS50 INSTALLATION
All dimensions shown are in the locked position.
a
b
b
c
d COVER PLATE
SCREW
RUBBER WASHER
DOUGHNUT RING
GLASS
RUBBER WASHER
a DOUGHNUT 1
c RUBBER WASHER 2
d PLASTIC SPACER 1
e SCREW 4
PARTS INCLUDED QTY.
Prices vary acco
rdin
gto
qu
antity o
rdered
.
*For Master Keyed locks, the Head Thickness is 5/8”.
Lock StylePL Plunger Lock
Core TypeS ASSA® Desmo
Housing Style50 Round Flange
Plunger Type/Length PriceS SERIES
S1 3/8" $66.63 S2 7/16" $66.53S3 5/8" $66.43
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.50Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y* Yes 2.15
Pat. Pending
ItemKEY Key
Core Type S ASSA® Desmo
Key Function PriceO Operating $6.35M Master 6.35
Key CodeXXXXX Specific
Up to 5 digits
A AnyKenstan assigns
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keys KEY
ASSA® Desmo Line S9
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SSD12
CBA D
KEY S O A
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ASSA® Desmo KeysOur ASSA® Desmo High Security cabinet lock keys are madefrom nickel-silver for long life, no deep cut to weaken the key.ASSA® Desmo keys must be precisely cut to exact depths andangles, and require special duplicating machines. The key blanksare considered restricted, factory controlled and never sold asuncut blanks.
Duplicate keys can not be made without the written signatureconsent and drivers license identification of the AuthorizedPurchasing Personnel. The patented key programs prevent theunauthorized duplication of keys and maintain system integrity.
Additional ASSA® Desmo restricted keys can only be orderedunder the original signature authorized users who initiated thekeying plan.
Original Keys can be ordered by referencing the stamp numberon the key.
If keys have been lost or stolen, we can reference the stampnumber on the lock housings, cams or bolts if available.
S
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
ABLOY® Line of Locks
V
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Keys
V3
V2
V4
V5
V7
V8
V9
V1
V6
VA
BLO
Y®
2008
Introduction
ABLOY® EXEC Line V12008
Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SC Satin Chrome
ABLOY® EXEC Line of Locks
The V line offers high security in a variety of showcase and cabinetlocks with thousands of high-security precision cut key combina-tions.
Locks can be keyed alike, individually or in groups and can be mas-ter, grand master or great grand master keyed.
DeliveryAt Kenstan, we assemble every lock to order and strive to meet yourrequested in-house date. Our standard lead time is to ship within 2weeks from the receipt of your order. Rush order and emergencyservices are available.
PlatingThe V line standard plating finish is Polished Chrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including Satin Chrome, Polished Brass, Satin Brass, Statuary Bronze, MatteBlack and Custom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes –call for pricing.
Resistance to Attack and Key ControlOur V line showcase and cabinet locks offer rotating disc technologyand are designed to offer a high level of physical security. The disc-style locking mechanism is designed without springs, assuring longlife and smooth operation. It is nearly impossible to pick these locksusing standard techniques.We can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain ahistorical database of key numbers. For security reasons, duplicationof V keys for locks purchased originally from Kenstan can only beobtained through Kenstan with an authorized signature. Key blanksare never sold.
Key Retaining Lock FunctionThe V line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
Please Note: Our V line of locks have a 90 degrees “lost motion”operation. The key is inserted and turned 90 degrees (key verifica-tion process) before the lock can begin to open.
Designer Note: For ttrruuee captive operation, the use of our captivekey locks must be coordinated with sliding door showcase design.The use of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrictdoor movement and ensure key removal only when the doors are inthe sseeccuurree position.
PC Polished Chrome
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
VV
5 Kenstan ABLOY 2008 1/7/08 5:25 PM Page 1
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e V12 to
ord
er keys.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F G H I J
CL V 04 1203 PC Y Y Y N 106
A
B
C
D
E
F
G
I
H
Cam Type Price
STRAIGHT (ST)
101 5/8" $ 0.00 102 3/4" 0.00103 7/8" 0.00104 1" 0.00105 1-1/8" 0.00106 1-1/4" Std.107 1-3/8" 0.45108 1-1/2" 0.45110 1-3/4" 0.45112 2" 0.50116 2-1/2" 0.50
1/8" OFFSET
303 7/8" 0.60306 1-1/4" 0.65308 1-1/2" 0.65312 2" 0.70
1/4" OFFSET
403 7/8" 0.60404 1" 0.65406 1-1/4" 0.65408 1-1/2" 0.65410 1-3/4" 0.65412 2" 0.70414 2-1/4" 0.70
3/8" OFFSET
504 1" 0.65506 1-1/4" 0.65508 1-1/2" 0.65512 2" 0.70
1/2" OFFSET
606 1-1/4" 0.65608 1-1/2" 0.65610 1-3/4" 0.65612 2" 0.70
5/8" OFFSET
712 2" 2.00
HOOK (HK)
202 3/4" 0.60204 1" 0.65206 1-1/4" 0.65208 1-1/2" 0.65210 1-3/4" 0.65
CUSTOM CAM
CL Call
J
Prices vary acco
rdin
g to
qu
antity o
rdered
.
All Cam Locks come with a 1-1/4" Straight Cam unless a different cam is chosen.
*Call Kenstan for counter clockwise rotations.
Lock StyleCL Cam Lock
Core TypeV ABLOY® EXEC
Housing Length PriceMAXIMUMMATERIAL BARREL THICKNESS LENGTH
03 1/2" 7/8" 37.3804 3/4" 1-1/8" 37.3810 1-3/8" 1-3/4" 52.1211 1-9/16" 2" 51.1213 2-1/4" 2-3/4" 55.0614 2-7/16" 3" 55.06
Cam RotationLOCKED OPEN
0312* 3 120306 3 60309 3 90612 6 120603* 6 30609 6 90912 9 120903 9 30906 9 61203* 12 31206 12 61209* 12 9
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingY Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75GA Great Grand Master 4.75
5 Kenstan ABLOY 2008 1/7/08 5:25 PM Page 2
CAM LOCK GLASS INSTALLATION PACKAGE (See Accessories page A8 for prices)
GLASS
Cam Lock CL
ABLOY® EXEC Line V3
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
METAL INSTALLATION WITH OFFSET CAM
GLASS INSTALLATION WITH HOOK CAM
WOOD INSTALLATION WITH STRAIGHT CAM
Straight Cam Offset Cam Hook Cam
HOUSING LENGTHS 10, 11, 13 and 14
WASHER
1-1/4"TYP.
1-1/4"TYP.
1/4"
7/8" EXTENSION SLEEVE
ANTI-ROTATION PLATE
FACE SLEEVE
SCREW
CAM ROTATIONS (Front of lock shown)
LOCKED @12OPEN @9
LOCKED @12OPEN @3
LOCKED @12OPEN @6
LOCKED @12OPEN @6
12
9 3
6
LENGTH
OFFSET DIM
LENGTH
HOUSING LENGTHS 03 and 04
1/8"TYP.
3/4"TYP.
7/8"TYP.
1/4"TYP.
5/8"TYP.
7/8"TYP.
2008Price List and Data Sheet
Cam Type
LENGTH
BARREL LENGTH
MAXIMUMMATERIAL
THICKNESSMUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
BARREL LENGTH
MAXIMUMMATERIAL THICKNESS
Note: All cams are reversible.
VERTICALFLATS
Call Kenstan for counter clockwise rotations.
STRAIGHT CAM
ANTI-ROTATIONTHREE TABMOUNTING PLATE(TABS BENT OVER TO PRE-VENT NUT FROM BACKINGOUT)
MOUNTINGSCREWSREQUIRED(NOT INCLUDED)
CAMADAPTER
SMALL THREETAB WASHER
NUT
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PRE-VENT NUT FROM BACKINGOUT)
MOUNTINGSCREWS REQUIRED(NOT INCLUDED)
CAMADAPTER
NUT
CAMADAPTER
OFFSET CAM
a METAL WASHER 2
b J BRACKET 1(anti-rotation)
c PLASTIC WASHER 1(adhesive)
d RUBBER WASHER 1
PART QTY.
d
SMALL THREETAB WASHER
SMALL THREETAB WASHER
NUT
HOOK CAM
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PRE-VENT NUT FROM BACKINGOUT)
MUST BE BENT OVERTO PREVENT NUTFROM BACKING OUT.
CALL KENSTAN FOR LOCK ILLUSTRATION.
cb
a
a
VV
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 3
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e V9 to
ord
er keys.
V4
DL Drawer/Door Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
ABLOY® EXEC Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
Prices vary acco
rdin
g to
qu
antity o
rdered
.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
STRAIGHT BOLT
2001200220032004
2205
3208
3209
3/8" OFFSET BOLT
STEEL SPRING BOLT (3/16” bolt engagement recommended)
STEEL SPRING BOLT (3/16” bolt engagement recommended)
34103411 (shown)
SLIDING SPRING BOLT
“Throw” (distance bolt travels from the locked to unlocked position) is 7/16".
All dimensions shown are in the locked position.
DL V L 3209 PC Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
L
5/16"
3/8"
5/16"
3/8"3/4"
1-5/16"
1-1/4"
1/8"
3/8"
1/4" TYP.
1/4" TYP.
1-3/8" TYP.7/8"
TYP.
2"TYP.
1-7/16"TYP.
5/8"TYP.
5/32" DIA. TYP.
Lock StyleDL Drawer/Door Lock
Core TypeV ABLOY® EXEC
Housing Length PriceL 1-3/16" Std.
Bolt TypeSTRAIGHT BOLT
2001 1-1/8" $53.782002 1-3/4" 53.882003 2-3/8" 53.982004 3-3/16" 54.08
3/8" OFFSET BOLT
2205 1-11/16" 54.33
STEEL SPRING BOLT
3208 1-3/8" 55.86
STEEL SPRING BOLT
3209 1-3/8" Std. 55.86
SLIDING SPRING BOLT
3410 1-3/8" Left 64.333411 1-3/8" Right 64.33
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key Retaining
* Option available only on Spring Boltmodels.
N* No 0.00Y Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
GA Great Grand Master 4.75
Pat. Pending
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 4
Prices vary acco
rdin
gto
qu
antity o
rdered
.N
OT
E: K
eys ar e not includ
ed w
ith this lock.
See p
age V
9 to o
rder keys.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Gang Lock GL
ABLOY® EXEC Line V5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
L
7/8"
1/4"
1-3/8"
2"1/16"
1/4"
5/8"
1-1/4"
2"
1-7/16"
5/32" DIA. TYP.
26242636264826CL30243036304830CL
FRONT MOUNT – SIDE VIEW
SIDE MOUNT (Shown with a Gang 3C Kit)
24242436244824CL28242836284828CL
FRONT MOUNT – FRONT VIEW
FRONT MOUNT (Shown with a Gang 3C Kit)
Gang Lock PackagesTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
CBA
GANG 3 C
GANG 3C A kit with threeadjustable stops, three 1-1/8" pins, three lock washers, and four closed bar guides.
GL V L 2424 PC Y Y Y N
CBA D E F G H I
A
B
C
D
E
F
G
H
I
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Lock StyleGL Gang Lock
Core TypeV ABLOY® EXEC
Housing Length PriceL 1-3/16" $53.30
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24" 7.75 2436 36" 9.10 2448 48" 19.95 24CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24" 7.752636 36" 9.10 2648 48" 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24" 7.75 2836 36" 9.10 2848 48" 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24" 7.75 3036 36" 9.10 3048 48" 19.95 30CL Custom Call
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingY Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75GA Great Grand Master 4.75
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8"B 3/4"C 1-1/8"D 1-7/8"
VV
Pat. Pending
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 5
V6
DL36 Snap Bolt Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
ABLOY® EXEC Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e V9 to
ord
er keys.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
SNAP BOLT
ISOMETRIC VIEW
All dimensions shown are in the locked position.
DL V L 36 PC N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
L
3/8”
STRIKE
1-1/8”.83
1”
1”
1/4”
7/8"
2"
1-7/16"
1-3/8"
53/64”REF.
1-5/8"
1-5/8"
5/32" DIA. TYP.
Lock StyleDL Drawer/Door Lock
Core TypeV ABLOY® EXEC
Housing LengthL 1-3/16"
Bolt Type PriceSNAP BOLT
36 3/4" $59.86
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
GA Great Grand Master 4.75
STRIKE SIDE VIEWSTRIKE FRONT VIEW
Prices vary acco
rdin
gto
qu
antity o
rdered
.
Pat. Pending
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 6
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL40
ABLOY® EXEC Line V7
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e V9 to
ord
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
CBA D E F G H I
A
B
C
D
E
F
G
I
H
PL V 40 R2 PC Y Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
ROUND SERIES
R2CL
15/64” DIA.TYP.
7/8"
1-3/8”1/4"
1-1/4"
.060
7/8"
2"
All dimensions shown are in the locked position.
Lock StylePL Plunger Lock
Core TypeV ABLOY® EXEC
Housing Style40 Oval Flange
Plunger Type/Length PriceROUND SERIES
R2 1/2" $63.88CL Custom Length Call
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingY Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75GA Great Grand Master 4.75
VV
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 7
R2CL
7/8"
1-1/4”
1/4”
.060 1/2”
7/8"
7/16”
.260
1-3/8”
V8
PL50 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
ABLOY® EXEC Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e V9 to
or d
er keys.
ROUND SERIES
Prices vary acco
rdin
g to
qu
antity o
rdered
.
PL V 50 R2 PC Y Y Y N
CBA D E F G H I
A
B
D
E
F
G
I
H
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
B
C
PLV50 INSTALLATION
All dimensions shown are in the locked position.
Lock StylePL Plunger Lock
Core TypeV ABLOY® EXEC
Housing Style50 Round Flange
Plunger Type/Length PriceROUND SERIES
R2 1/2" $83.73 CL Custom Length Call
Plating FinishPC Polished Chrome Std.SC Satin Chrome 2.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingY Yes Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75GA Great Grand Master 4.75
ab
b
c
d COVER PLATE
SCREW
GASKET
DOUGHNUT RING
GLASS
GASKET
a DOUGHNUT RING 1
b GASKET 2
c SCREW 3
d COVER PLATE 1
PARTS INCLUDED QTY.
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 8
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keys KEY
ABLOY® EXEC Line V9
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
D12
CBA D
KEY V O A
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ABLOY® EXEC KeysOur ABLOY® EXEC High Security cabinet lock keys are madefrom nickel-silver and have a heavyduty polymer key bow.ABLOY® EXEC keys must be precisely cut to exact depths andangles, and require special duplicating machines. The key blanksare considered restricted, factory controlled and never sold asuncut blanks. Duplicate keys can not be made without the written signature consent and drivers license identification of theAuthorized Purchasing Personnel. The patented key programsprevent the unauthorized duplication of keys and maintain system integrity.
Additional ABLOY® EXEC restricted keys can only be orderedunder the original signature authorized users who initiated thekeying plan.
Kenstan Original Keys can be ordered by referencing the stampnumber on the key.
If keys have been lost or stolen, we can reference the stampnumber on the lock housings, cams or bolts if available.
VV
ItemKEY Key
Core Type V ABLOY® EXEC
Key Function PriceO Operating $5.35M Master 5.35G Grand Master 5.35GA Great Grand Master 5.35
Key CodeXXXXX Specific
Up to 5 digits
A AnyKenstan assigns
VV
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 9
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core Line of Locks
I.C. C
ore
KenstanL O C K C O M P A N Y
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Ratchet Lock
Cores
Keys
I2
I3
I4
I5
I9
I10
I1
I7
I6
I8
I11
I12
2008
Interchangeable Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
BL Matte Black
SB Satin Brass
PB Polished Brass
PC Polished Chrome
Interchangeable Core Line of Locks
Our I line offers excellent security in a variety of showcase locks anddoor hardware applications by using thousands of 6 and 7 Pin Tumblerkey combinations.
Cores can be keyed alike, individually or in groups and can be masterkeyed in up to four levels for greater flexibility. Kenstan housings and cores are equivalent to Best Access locks and are therefore inter-changeable among both company products.
DeliveryAt Kenstan, we maintain a large stock of housings and cores to meetyour in-house date.
Plating
The I line standard plating finish for housings and cores is BrushedChrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, includingPolished Chrome, Polished Brass, Matte Black, Statuary Bronze, SatinBrass and Custom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special plating finishes – call for pricing.
HandingHanding means the orientation of the key relative to the bolt move-ment. We can almost always orient the lock so the key is inserted verti-cally.
• Right Handing means the door hinges on the right side and locks on the left.
• Left Handing means the door hinges on the left side and locks on the right.
• Vertical Handing means the drawer is locked at the top.• Inverted Handing means the drawer is locked at the bottom.
Key ControlKenstan can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain a histori-cal database of key numbers. Keys should be secured when not in use.
Key Retaining vs. Non-Key Retaining Lock FunctionThe I line standard operation is a non-key retaining function (non-captive). The operating key can be removed in both the lockedand unlocked position.
For higher security, we recommend the key retaining (captive) function,which ensures that the key can be removed only in the locked positionand prevents the lock from being accidentally left in the open orunlocked position.
Designer Note: For ttrruuee captive operation, the use of our captive keylocks must be coordinated with sliding door showcase design. Theuse of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrict doormovement and ensure key removal only when the doors are in thesseeccuurree position.
BC Brushed Chrome
Introduction
I12008
Price List and Data Sheet
Interchangeable Core
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
1-7/8"
1-5/32"1-3/8"
1/8"1-7/8"
7/8"FLATS
VERTICAL FLATS
1-1/8"
1-3/16"
1-7/16"
1-3/4"
1-7/8"
OFFSET CAM1 included
5/16"
1/8"
CBA D E F
CL I 05 1203 BC Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
F
*Cores are not included with this lock. See page I11 to order cores.
Lock StyleCL Cam Lock
Core Type*I I.C. Core
Housing Length PriceMAXIMUMMATERIAL BARREL THICKNESS LENGTH
05 1-3/16" 1-7/16" $20.96
Cam RotationLOCKED OPEN
0312 3 120306 3 60309 3 90612 6 120603 6 30609 6 90912 9 120903 9 30906 9 61203 12 31206 12 61209 12 9
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35CF Custom Finish Call
Key RetainingN No Std.Y Yes 0.00
I2
CL Cam Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
HOUSING LENGTH 05
1-3/8"
1" 3/4"
3/4" 1-1/2"
3/64"
2-1/8"
KEY RETAINING DRAWER CAM SHIFTER
1 included
KEY RETAINING DOOR CAM SHIFTER
1 included
LOST MOTION CAM SHIFTER1 included
SPACER FOR 6 PIN CORE1 included
LOCK PARTS
7/8"
INVERTED CAM1 included
ANTI-ROTATION MOUNTING PLATE1 included
PLASTIC ACTIVATOR1 included
MOUNTING SCREWS3 included
1/8"
All 180 degree rotations are clockwise, unless specified.
1/4"
#6 x .75" LG. SCREW (to mount 1/4" thick str ike)
2 included
#6 x 1.0" LG. SCREW (to mount 1/2" thick str ike)
2 included
C FBA D E
DL I 25 RV BC N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Drawer/Door Lock DL25
I3
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
A
B
C
D
E
F
All dimensions shown are in the locked position.
*Cores are not included with this lock. See page I11 to order cores.
VERTICAL
INVERTED
1-1/4"TYP.
1-1/8" TYP.
1-1/2"TYP.
1" TYP.
3/4"TYP.
9/16" TYP.
3/16" TYP.
1/4" TYP.
1-3/8" TYP.
1-1/16" TYP.
1-17/32" TYP.
2" TYP.0.171" THRU TYP.
LOCK PARTS
#8 x 1.5" LG. SCREW (to mount lock)
4 included
1/2"3/4" TYP.
1/2" BAR STRIKE1 included
1/4" BAR STRIKE1 included
1-3/8" TYP.
2"TYP.
2"
3/16" TYP.
PLASTIC SPACER3 included
1/8"
1"
1-1/8"
1-1/2"
1-1/2"
Lock StyleDL Drawer/Door Lock
Core Type*I I.C. Core
Bolt Type Price25 Straight Dead Bolt $24.08
Housing StyleRIM SERIES
RR RightRL LeftRI InvertedRV Vertical
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35CF Custom Finish Call
Key RetainingN No Std.Y Yes 6.75
RIGHT
LEFT
1-1/4"TYP.
1/2" TYP.
1-5/8"
2"
3/8"
1/4"
RIM MOUNT INVERTED SPRING BOLT
All dimensions shown are in the locked position.
I4
DL Drawer/Door Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
RIM MOUNT VERTICAL DEAD BOLT
MORTISE MOUNT LEFT DEAD BOLT
MORTISE MOUNT RIGHT SPRING BOLT
1/2" TYP.
1/16" TYP.1/2"
3/16"
3/4" TYP.
1-1/8"TYP.
1-1/16"TYP.
3/8"
5/8" TYP.
1-3/8"7/8"TYP.
2-1/8"TYP.
2-5/8" TYP.
2-3/16" TYP.
1-3/4" TYP.
C FBA D E
DL I 20 RV BC N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
F
*Cores are not included with this lock. See page I11 to order cores.
LOCK PARTS
SPACER FOR 6 PIN CORE
1-7/16" TYP.
RIM DEAD BOLT STRIKE
1-7/8" TYP.
MORTISE DEAD BOLT STRIKE
RIM SPRING BOLT STRIKE
MORTISE SPRING BOLT STRIKE
5/16" TYP.
5/8" TYP.
1" TYP.
3/8" TYP.
PARTS INCLUDED QTY.
RIM DEAD BOLT 1STRIKE
#4 x 5/8" LG. SCREW 2
#8 x 1/2" LG. SCREW 2
6 PIN SPACER 1
#8 x 1/2" SCREW (to mount lock)
#4 x 5/8" SCREW (to mount str ike)
PARTS INCLUDED QTY.
MORTISE DEAD 1BOLT STRIKE
#4 x 5/8" LG. SCREW 2
#8 x 1/2" LG. SCREW 2
6 PIN SPACER 1
PARTS INCLUDED QTY.
RIM SPRING BOLT 1STRIKE
#4 x 5/8" LG. SCREW 2
#8 x 1/2" LG. SCREW 2
6 PIN SPACER 1
PARTS INCLUDED QTY.
MORTISE SPRING 1BOLT STRIKE
#4 x 5/8" LG. SCREW 2
#8 x 1/2" LG. SCREW 2
6 PIN SPACER 1
Lock StyleDL Drawer/Door Lock
Core Type*I I.C. Core
Bolt Type Price20 Straight Dead Bolt $23.48 32 Spring 23.4833 Reverse Spring 23.48
Housing StyleRIM SERIES
RR RightRL LeftRI InvertedRV VerticalMORTISE SERIES
MR RightML LeftMI InvertedMV Vertical
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35CF Custom Finish Call
Key Retaining
* Option available only on Straight DeadBolt model.
N No Std.Y* Yes 0.00
CBA D E F
GL I R 2424 BC N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
F
Lock StyleGL Gang Lock
Core Type*I I.C. Core
Housing Style PriceR Rim Series $49.35M Mortise Series 49.35
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24" 7.75 2436 36" 9.10 2448 48" 19.95 24CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24" 7.752636 36" 9.10 2648 48" 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24" 7.75 2836 36" 9.10 2848 48" 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24" 7.75 3036 36" 9.10 3048 48" 19.95 30CL Custom Call
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35CF Custom Finish Call
Key RetainingN No Std.Y Yes 0.00
*Cores are not included with this lock. See page I11 to order cores.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Gang Lock GL
I5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
1-1/8" TYP.
1/2" TYP.
5/8" TYP.
2"
1-1/4"
2-1/8"TYP.
3/16"
2-3/16" TYP.
26242636264826CL30243036304830CL
SIDE MOUNT (Shown with a Gang 3C Kit)
24242436244824CL28242836284828CL
FRONT MOUNT (Shown with a Gang 3C Kit)
Gang Lock PackagesTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
CBA
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8"B 3/4"C 1-1/8"D 1-7/8"
GANG 3 C
GANG 3C A kit with threeadjustable stops, three 1-1/8" pins, three lock washers, and four closed bar guides.
1-1/4"TYP.
2-1/8"
5/8"
1-3/4" TYP.
2-5/8" TYP.
1-1/16" TYP.
3/8" TYP.
1/16" TYP.
FRONT MOUNT – SIDE VIEWFRONT MOUNT – FRONT VIEW
I6
DL35 Drawer/Door Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
C FBA D E
DL I 35 RI BC N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
F
*Cores are not included with this lock. See page I11 to order cores.
All dimensions shown are in the locked position.
RIM MOUNT INVERTED INTERLOCKING SPRING BOLT
MORTISE MOUNT INVERTED INTERLOCKING SPRING BOLT
2 1/8”
1 3/4”
1/2”
1/2”
3/4”
1/2”
5/8”
1/16”
1 1/8”
1-1/8”
2 3/16”
7/8”
3/16”
3/4”
2-1/8”
2 5/8”
Lock StyleDL Drawer/Door Lock
Core Type*I I.C. Core
Bolt Type Price35 Interlocking Spring $35.25
Housing StyleRIM SERIES
RI InvertedMORTISE SERIES
MI Inverted
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35CF Custom Finish Call
Key RetainingN No Std.
Patented
1-5/8”
2”
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Snap Bolt Lock DL36
I7
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
C FBA D E
DL I 36 RV BC N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
F
*Cores are not included with this lock. See page I11 to order cores.
Lock StyleDL Drawer/Door Lock
Core Type*I I.C. Core
Bolt Type Price36 Snap Bolt $23.48
Housing StyleRIM SERIES
RV Vertical
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35CF Custom Finish Call
Key RetainingN No Std.
RIM MOUNT VERTICAL SNAP BOLT
All dimensions shown are in the locked position.
1/4” APPROX.
1-1/2”
1”
1”
1. 20
1-1/8"
7/8"
3/4"
1. 20
1-1/16"
1/8”
2-5/8"
2-1/8"
2-1/8"
1-3/4"
7/8"
1-5/8"
1-13/64”
3/16" DIA. TYP.
STRIKE FRONT VIEW STRIKE SIDE VIEW
DIMETRIC VIEW
I8
PL40 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
1/8"
7/8" 3/4"
2"
ROUND SERIES (Plunger travels 1/2”)
1-1/2"
1-3/4"
5/8"
3/16"
R2R3
T SERIES
1-3/4"STRIKE
3/16"T1
7/8"
2"1-1/2"
1/2"
1/2"STRIKE
1/8"
RED SECURITYSTRIPE
C F GBA D E
PL I 40 R2 BC N N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
G
F
PLI40R2BCNY – EXPLODED VIEW
#8-32 x 5/8"SCREWS TYP.
MOUNTINGPLATE
5/16" LG. POST TYP.
*See page A5 for support Plates. Dimensions.
*1/4” of the plunger will not retract into the housingwhen the lock is in the open position.
*Cores are not included with this lock. See page I11 to order cores.
All dimensions shown are in the locked position.
Note: Through Bolt Mount Kit is for 3/4" maximum material thickness. Other kits are also available. See Accessories page A7 to order.
Lock StylePL Plunger Lock
Core Type*I I.C. Core
Housing Style40 Oval Flange
Plunger Type/Length PriceROUND
R2 1/2" $31.01
ROUND EXTENDED
R3* 3/4" 35.88
T SERIES
T1 1/4" 35.42
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35CF Custom Finish Call
Key RetainingN No Std.Y Yes 4.50
Through Bolt Mount KitN No Std.YP Mounting Post Kit 4.68YS Support Plate Small* 5.14YL Support Plate Large* 5.88
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Plunger Lock PL50
I9
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable CoreI8
HOUSING
FRONT GASKET
GLASS
REAR GASKET
BACK PLATE
#8-32 x 3/8" LG.MOUNTING SCREWS*
HOUSING
WOOD
BACK PLATE
#8-32 x 7/8" LG.MOUNTING SCREWS***
HOUSING
METAL
BACK PLATE
#8-32 x 5/8" LG.MOUNTING SCREWS**
CBA D E
PL I 50 G1 BC
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
*Cores are not included with this lock. See page I11 to order cores.
METAL INSTALLATION
WOOD INSTALLATION
1-3/16"
1/4"
1/8"
GLASS INSTALLATION
#8-32 TAPPED HOLE
1-3/8"
15/16"3/8"
SIDE VIEW BACK VIEW
BACK PLATEHOUSING
1/4" THRU
1-3/8"
15/16"
*Screws are for 3/8" maximum material thickness and 1/4" minimum material thickness.
**Screws are for 1/2" maximum material thickness and 3/8" minimum material thickness.
***Screws are for 7/8" maximum material thickness and 3/4" minimum material thickness.
All dimensions shown are in the locked position.
Note: Material thickness can be changed by using an “O” ring or changing the screw length.
See Accessories page A5 to order. Patented
Lock StylePL Plunger Lock
Core Type*I I.C. Core
Housing Style50 Round
Material Installation Kit PriceKENSTAN ALPHA CORE
G1 Glass $14.83M1 Metal 14.54W1 Wood 14.54
SUBSTITUTE ALPHA CORE
G2 Glass 15.64M2 Metal 15.34W2 Wood 15.34
KENSTAN OR SUBSTITUTE STANDARD CORE
G3 Glass 15.64M3 Metal 15.34W3 Wood 15.34
Plating FinishBC Brushed Chrome Std.PC Polished Chrome 0.00PB Polished Brass 0.95SB Satin Brass 3.35BL Matte Black 3.35CF Custom Finish Call
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
All dimensions shown are in the locked position.
STANDARD BAR B1
C FBA D E
RL I 60 B1 BC N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
*Cores are not included with this lock. See page I11 to order cores.
Lock StyleRL Ratchet Lock
Core Type*I I.C. Core
Housing Style60 Ratchet
Bar Type Price
B1 Standard $28.65B2 Adjustable 36.96
Plating FinishBC Brushed Chrome Std.CF Custom Finish Call
Key RetainingN No Std.
E
F
6”
1-7/16”
1/4” MAX. GLASS THICKNESS
7/16”
1-1/8”
2-3/8”
5/8”
7/8” MIN.5-1/4” MAX.
I10
RL60 Ratchet Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Interchangeable Core
ADJUSTABLE BAR B2 (Used on Wood, Metal & Acrylic)
3/8” MIN. MATERIAL THICKNESS1/2” MAX. MATERIAL THICKNESS
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Cores COR
I11
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable CoreI10 Interchangeable Core
SCREW
EXTENSION
STANDARD CORE
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
CBA D E F G H I J
COR I S7 8 SC N N Y N N
S6S7
1/8" TYP.
5/8" TYP.
12
A
E
F
G
I
J
H
B
C
D
STANDARD EXTENDED CORE – EXPLODED VIEW
ALPHA EXTENDED CORE (Non-key Retaining model shown)
ALPHA CORE (Key Retaining model shown)
STANDARD CORE
1" TYP.
A7
Std.CallCallCallCallCall0.25CallCallCallCallCallCallCall
Lock StyleCOR Interchangeable Core
Core TypeI I.C. Core
Core Type/Number of Pins PriceS6 Standard 6 Pin $15.00 S7 Standard 7 Pin 15.00A7 Alpha 7 Pin 18.40
Keyway8* SecureABCDEFGHJKLMQ
Plating FinishSC Satin Chrome Std.PC Polished Chrome 0.85PB Polished Brass 0.85SB Satin Brass 0.85BL Matte Black 2.25CF Custom Finish Call
Key RetainingKey retaining option is not available on Standard Core model. (Lock should be ordered as Key Retaining.)
N No 0.00Y Yes 0.00
Keyed DifferentN No 0.00Y Yes 0.45
Stamp CoreN No 0.00Y Yes 0.45
Master KeyedN No 0.00Y Yes 0.75G Grand Master 1.25GA Great Grand Master 2.75GB Great Great 4.75
Grand Master
ExtendedN No Std.1 1/2" Extension 3.252 1" Extension 3.95
*Restricted codes are available upon request. (Signature Req.)
(Patented)
8 keyway core (Patented)
I12
KEY Keys 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
A
B
C
D
E
CBA D E
KEY I O F XXXX
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Interchangeable Core Keys
Our Kenstan Interchangeable Core Key product ties into all ofthe existing Best Access alphabetical keyways.
Kenstan unrestricted I keys can be ordered by referencing thestamp number on the key. Keys duplicated by a locksmith willusually not carry over the stamp number – we may need the keysent to us to process your order for keys. Master keys will haveMaster stamped on the key bow; grand master keys will have G Master stamped on the key bow; great grand master keys willhave GG Master stamped on the key bow and great great grandmaster Keys will have GGG Master stamped on the key bow.Core Removal keys will have Control stamped on the key bow.
If keys have been lost or stolen, we can reference the stampnumber on the face or the side of the core (if available) or wecan decode a core that is sent to our factory.
ItemKEY Key
Core TypeI I.C. Core
Key Function PriceO Operating $3.75M Master 3.75G Grand Master 3.75GA Great Grand Master 3.75GB Great Great 3.75
Grand MasterC Control 3.75
To Remove Core
Keyway8* SecureABCDEFGHJKLMQ
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
*Signature required for restricted codes.
(Patented)
8 Keyway Key.
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Pin Tum
bler
Pin Tumbler Line of Locks
KenstanL O C K C O M P A N Y
Introduction
Cam Lock
Drawer/Door Lock
Plunger Lock
Keys
P2
P3
P4
P1
P5
2008
SB Satin Brass
PB Polished Brass
Introduction
2008Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
Pin Tumbler Line of Locks
For excellent security, our P line offers a variety of lock types thatcan be keyed alike, individually or in groups. They can also be mas-ter keyed or grand master keyed using thousands of 4 and 5 PinTumbler key combinations in National D4291 and CCL R1 keyways.
DeliveryAt Kenstan, we assemble every lock to order and strive to meetyour requested in-house date. Our standard lead time is to shipwithin 2 weeks from the receipt of your order. Rush order andemergency services are available.
PlatingThe P line standard plating finish is Satin Chrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, includingPolished Brass, Satin Brass, Matte Black, Polished Chrome,Statuary Bronze and Custom Finishes to match your showcasehardware.
Please note: Plating lot charges may apply to the special finishes –call for pricing.
Handing Handing means the orientation of the key relative to the bolt move-ment. We can always orient the lock so the key is inserted vertically.
• Right Handing means the door hinges on the right side and lockson the left.
• Left Handing means the door hinges on the left side and lockson the right.
• Vertical Handing means the drawer is locked at the top.• Inverted Handing means the drawer is locked at the bottom.
Key ControlKenstan can register your keys and maintain your key plans bystore, retail department, showcase/cabinets, or office and we main-tain a historical database of key numbers. Keys should be securedwhen not in use.
Key Retaining vs. Non-Key Retaining Lock FunctionThe P line standard operation is a non-key retaining function (non-captive). In this operational condition, the operating key can beremoved in the unlocked position.
For higher security we recommend the key retaining (captive) func-tion, which forces the key to be removed in the locked position only.The lock cannot be accidentally left in the open/unlocked position.
SC Satin Chrome
Pin Tumbler Line P1
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead time and plating lot charges may apply to thespecial and Custom finishes. Please call Kenstan for details.
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 1
7/8"1/2"
5/8"
7/8" 1-1/4"
1/8"
1-1/4"
CBA D E F G H I
CL PN 04 0312 SC N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
T wo
keys are included
with this lo
ck.S
ee pag
e P5 to
ord
er add
itional keys.
G
I
H
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
A
B
C
D
E
F
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
Lock StyleCL Cam Lock
Core Type PricePN National Keyway $ 0.00PC Corbin Keyway 7.07
Housing LengthMAXIMUMMATERIAL BARREL THICKNESS LENGTH
04 3/4" 1-1/16" 17.9505 7/8" 1-3/16" 18.6906 1-1/8" 1-7/16" 19.4307 1-1/2" 1-13/16" 20.05
Cam RotationLOCKED OPEN
0312 3 120306 3 60309 3 90612 6 120603 6 30609 6 90912 9 120903 9 30906 9 61203 12 31206 12 61209 12 9
Plating FinishSC Satin Chrome Std.PB Polished Brass 0.95CF Custom Finish Call
Key RetainingN No Std.Y Yes 0.00
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.75G Grand Master 2.10
P2
CL Cam Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Pin Tumbler Line
#6 x 3/8" SHEET METAL MOUNTING SCREW
3 included
HOUSING LENGTHS 04, 05, 06 and 07
5/8"FLATS
5/8"
LOCK PARTS
1/8"
1-1/4"
5/8"
1/8"
3/4"
1-1/8"
5/8"
BARREL LENGTH
MAXIMUMMATERIAL
THICK-NESS
VERTICALFLATS
7/8"
STRAIGHT CAM1 included
OFFSET CAM1 included
ANTI-ROTATION MOUNTING PLATE1 included
1-1/4"
1/8"
1/4"
1-3/4"
All 180 degree rotations are clockwise, unless specified.
CALL KENSTAN FOR LOCK ILLUSTRATION.
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 2
ML
9/16"TYP.
1-3/8"7/8" TYP.
7/8"
1-1/4" TYP.
15/16" TYP.
1-5/16" TYP.
1-5/8" TYP.
1-1/4"
3/4"1-3/8"
1/4"
3/16"
1-3/8"
1/4"
1/4"
7/8"5/8"
1/4"
7/8"
1/2"
1-5/8"
3/4"
1/4"
3/8"
1"
1-1/8"
3/8"
7/8"
1/2"
1-3/8"
1/4"TYP.3/4"
LOCK PARTS
SPRING BOLT STRIKE
1/4" THICK DEAD BOLT STRIKE
#4 x 5/8" LG. SCREW (to mount str ike)
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Drawer/Door Lock DL
Two
keys are included
with this lo
ck.S
ee pag
e P5 to
ord
er add
itional keys.
CBA D E F G H I
DL PN M 20H SC N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
SPRING BOLT (32V shown)
SPRING BOLT LEFT (32L shown)
SPRING BOLT INVERTED (32I shown)
STRAIGHT DEAD BOLT (20V shown)
Prices vary acco
rdin
g to
qu
antity o
rdered
.
G
I
H
F
All dimensions shown are in the locked position.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Drawer/Door Lock DL
Pin Tumbler Line P3
PARTS INCLUDED QTY.
STRAIGHT DEAD 1BOLT STRIKE
#6 x 1.0" LG. SCREW 4
#4 x 5/8" LG. SCREW 2
These spring bolt locks can be converted to Vertical, Inverted, Left or Right hand orientation.
1/4" RADIUS
1/2"
1-1/4"7/16"1-3/8"
1-7/8"
1/2"1-1/2"
1-7/8"
1/8" TYP.
#6 x 1.0" LG. SCREW (to mount lock)
#8 x 5/8" LG. SCREW (to mount str ike)
PARTS INCLUDED QTY.
SPRING BOLT 1STRIKE
#6 x 1.0" LG. SCREW 4
#8 x 5/8" LG. SCREW 2
PARTS INCLUDED QTY.
SPRING BOLT 1STRIKE
#6 x 1.0" LG. SCREW 4
#8 x 5/8" LG. SCREW 2
PARTS INCLUDED QTY.
SPRING BOLT 1STRIKE
#6 x 1.0" LG. SCREW 4
#8 x 5/8" LG. SCREW 2
Lock StyleDL Drawer/Door Lock
Core Type PricePN National Keyway $ 0.00PC Corbin Keyway 8.28
Housing LengthM 1" 0.00L 1-1/2" 1.37
Bolt TypeSTRAIGHT DEAD BOLT
20H Horizontal 20.5520V Vertical 20.55
SPRING BOLT
32R Right 43.6332L Left 43.6332V Vertical 43.6332I Inverted 43.63
Plating FinishSC Satin Chrome Std.SB Satin Brass 0.95CF Custom Finish Call
Key Retaining
* Option available only on Straight Bolt model.
N No Std.Y* Yes 4.50
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.75G Grand Master 2.10
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 3
P4
PL40 Plunger Lock 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Pin Tumbler Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Two
keys are included
with this lo
ck.S
ee pag
e P5 to
ord
er add
itional keys.
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
CBA D E F G H I
PL PN 40 R2 SC N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
G
I
H
F
Lock StylePL Plunger Lock
Core Type PricePN National Keyway $31.80PC Corbin Keyway 37.82
Housing Style40 Oval Flange
Plunger Type/LengthROUND SERIES
R2 7/16"
Plating FinishSC Satin Chrome Std.PB Polished Brass 0.95CF Custom Finish Call
Key RetainingN No Std.
Keyed DifferentN No Std.Y Yes 0.45
Stamp LockN No Std.Y Yes 0.45
Master KeyedN No Std.Y Yes 1.75G Grand Master 2.10
3/16" TYP.
3/8"
1-1/8"
1"2"
ROUND SERIES
All dimensions shown are in the locked position.
1/8"
7/16"
1-1/2"
1"
1/2"
7/16"9/16"
LOCK PARTS
PLUNGER CUP1 included
STRIKE LOCATOR1 included
PLUNGER EXTENSION1 included
#6 x .75" LG. MOUNTING SCREW2 included
3/16"
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 4
2005Price List and Data Sheet
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keys KEY
Pin Tumbler Line P5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Pin Tumbler Keys
Our Pin Tumbler locks utilize either the National NA12 (D4291) or the Corbin R1 keyways. These flat brass 4 and 5 pin keys arewidely available through locksmith distribution for key duplication.
Kenstan Pin Tumbler Keys can be ordered by referencing thestamp number on the key. Keys may be stamped with the keynumber itself (915 or 4T2) or a stamp number representing a key number (such as a 2 stamp representing a 915 or 4T2).Keys duplicated by a locksmith will usually not carry over thestamp number – we may need a photocopy of the key faxed ora key sent to us to process your order for keys. Master keys willhave Master stamped on the key bow; grand master keys willhave GMK stamped on the key bow.
If keys have been lost or stolen, we can reference the stampnumber on the face of the lock (if available) or we can decode alock that is sent to our factory.
CBA D
KEY PN O XXXX
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ItemKEY Key
Core TypePN National KeywayPC Corbin Keyway
Key Function PriceO Operating $ 2.00M Master 2.00G Grand Master 2.00
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 5
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Accessories
Accessories
Face Sleeves, Collars and Spacers
Spacers and Washers
Strikes
Strikes and Mounting Plates
Mounting Plates, Spacers and Cams
Gang Lock Hardware
Miscellaneous
Packages and Cams
A2
A3
A4
A1
A5
A6
A7
A8
2008
2008Price List and Data Sheet
3/4"
3/32"
1-1/16"
3/4"
1/16"
1-1/4"
5/8"
1/8"
1-1/8"
7/8"
1/4"
1-1/8"
5/8"
5/8"
3/32"
1-3/8"
7/8"
1-5/8"
1-1/2"
1-5/32"
2"
1/2"
1/8"
1-1/2"
1-3/8"
1-5/32"
1-3/4"
1-5/32"
3/16"
1-3/8"
Face Sleeves/Collars/Spacers
Accessories A1
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
For use with P Drawer/Door Locks.
SPACER
A decorative mounting for use with I Cam Locks.
PROTECTIVE COLLAR
For use with I Cam Locks.
COLLAR/SPACER
Used to prevent metal track from bending when mounting locks.
5/16” SPACER
For use with I25 Drawer/Door Locks.
SPACER
For use with D, K, M, S, V and P Cam Locks.
FINGER PULL
A decorative mounting for use with D, K, M, S and V Cam Locks. The Face Sleeve can also be used to position the Cam.
FACE SLEEVE
A decorative mounting for use with D, K, M, S and V Cam Locks. The Face Sleeve can also be used to position the Cam.
FACE SLEEVE
For use with D, K, M, S and V Cam Locks.
FACE SLEEVE WASHER
For use with D, K, M, S and V Drawer/Door Locks.
TRIM RING
*Plating Finish: PN Polished Nickel; PB Polished Brass; SB Satin Brass; BL Matte Black; ST Statuary Bronze; BC Brushed Chrome; AL Aluminum; WH White; CF Custom Finish
1/8"
PlatingItem Number Finish* Price
A U CL FSL XXX 108 PN $0.51PB 0.51BL 0.71ST 0.71CF Call
PlatingItem Number Finish* Price
A P DL SPA PLA 010 WH $1.10
PlatingItem Number Length Finish* Price
A I CL COL SPA 009 3/32" AL $2.79016 5/32" 2.79019 3/16" 2.79025 1/4" 2.79050 1/2" 2.79
PlatingItem Number Finish* Price
A I CL COL BVL 173 BC $9.25PB 9.25CF Call
PlatingItem Number Finish* Price
A U CL PUL FGR XXX PN $0.75CF Call
PlatingItem Number Finish* Price
A U CL FSL XXX 124 PN $0.60PB 0.76BL 0.76ST 0.76CF Call
PlatingItem Number Finish* Price
A U CL FSL WSH 116 PN $0.51CF Call
PlatingItem Number Finish* Price
A U DL TRM RNG 110 PN $0.71SB 0.71ST 0.71CF Call
PlatingItem Number Finish* Price
A I 25 SPA PLA 013 WH $1.30
PlatingItem Number Finish* Price
A U XX SPA XXX 31 PC $0.68
1/4"
5/32"
5/16"
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 1
PlatingItem Number Finish* Price
A U DL SPA XXX XXX PN $0.32ST 0.32CF Call
PlatingItem Number Finish* Price
A U CL WSH LKW 075 ZN $0.36
PlatingItem Number Finish* Price
A U CL WSH PLA 113 WH $0.23
PlatingItem Number Finish* Price
A U CL WSH RBR 113 BL $0.20
PlatingItem Number Finish* Price
A U CL WSH FLT 103 PN $0.25PB 0.25ST 0.25CF Call
PlatingItem Number Finish* Price
A U 40 SPA XXX 200 PN $0.49CF Call
PlatingItem Number Finish* Price
A U CL WSH ANR 4PR ZN $0.22CF Call
PlatingItem Number Finish* Price
A U CL CVR CAM RBR BL $0.35
For use with Cams.
RUBBER CAM COVER
For use with D, K, M, S, V and P Cam Locks.
4 PRONG ANTI-ROTATION WASHER
For use with D, K, M, S, V and P Cam Locks.
2 PRONG ANTI-ROTATION WASHER
For use with D, K, M, S, V and P Cam Locks.
WONDER WASHER
FLAT METAL WASHER
For use with D, K, M, S, V and P Cam Locks.
3/4" INTERNAL LOCK WASHER
For use with D, K, M, S and V40 Plunger Locks.
1-1/2"
.050
2"
SPACER
For use with D, K, M, S and V Drawer/Door and Gang Locks.
SPACER
For use with D, K, M, S, V and P Cam Locks.
5/8"
1-1/8"
RUBBER WASHER
For use with D, K, M, S, V and P Cam Locks.
ADHESIVE PLASTIC WASHER
*Plating Finish: PN Polished Nickel; PB Polished Brass; BL Matte Black; ST Statuary Bronze; ZN Zinc; WH White; CF Custom Finish
3/4"
7/8"
A2
Spacers/Washers 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Accessories
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
PlatingItem Number Finish* Price
A U CL WSH ANR 2PR ZN $0.22CF Call
For use with D, K, M, S, V and P Cam Locks.
7/8"
1-3/8"
1/16"THICK
2"
7/8"
1-1/2"
1/64" THICK
5/8"
1-1/8"
1/64"THICK
3/4"
1-1/4"
1/16"THICK
7/8"
1/32"THICK
5/8"
1-3/16"
.035
5/8"
1-1/8"
PlatingItem Number Finish* Price
A U CL WSH ANR XXX PN $0.55CF Call
1/16"THICK
3/4"
1-1/4"
1/32"THICK
3/4"
1"
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 2
PlatingItem Number Finish* Price
STR 212 PN $1.75PB 1.60CF Call
PlatingItem Number Finish* Price
STR 221 PN $0.81CF Call
PlatingItem Number Finish* Price
STR 211 PN $0.42CF Call
PlatingItem Number Finish* Price
STR 203 PN $1.02CF Call
PlatingItem Number Finish* Price
STR 202 PN $0.89SB 0.70CF Call
PlatingItem Number Finish* Price
STR 201 PN $1.30CF Call
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Strikes
Accessories A3
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
1/2" ADJUSTABLE “L” STRIKE
1-7/8" SOLID STRIKE PLATE
1" SPRING BOLT SLOTTED STRIKE PLATE
1-1/8" SPRING BOLT SLOTTED STRIKE PLATE
1-7/8" SPRING BOLT SOLID STRIKE PLATE
1-1/4" SOLID STRIKE PLATE
7/8" SLOTTED STRIKE PLATE
1-1/8" SLOTTED STRIKE PLATE
1-1/4" SLOTTED STRIKE PLATE
1" SLOTTED STRIKE PLATE
*Plating Finish: PN Polished Nickel; PB Polished Brass; SB Satin Brass; CF Custom Finish
PlatingItem Number Finish* Price
STR 204 PN $1.75PB 1.60CF Call
PlatingItem Number Finish* Price
STR 321 PN $1.75PB 1.60CF Call
PlatingItem Number Finish* Price
STR 322 PN $2.30PB 3.90CF Call
PlatingItem Number Finish* Price
STR 331 PN $1.75PB 1.60CF Call
7/8"
1/4"
1-7/8"
1-1/2"
1/2"
1/16" THICK
1-1/8"
1/4"
2-1/4"
1-7/8"
3/8"
1/16" THICK
1-1/4"
1/4"
2"
1-5/8"
1/2"
1/8" THICK
1"
3/8"
1-7/8"
1-3/8"
5/8"
1/16" THICK
1-1/4"
7/8"
1/2"
1/16" THICK
1-7/8"
1-3/8"
5/8"
1/16" THICK
1-1/4"
3/8"
1-7/8"
1-3/8"
5/8"
1/16" THICK
1"
7/16"
1-1/4"
3/8"
2-1/2"
1-7/8"
1"
1/16" THICK
1-1/8"
1-1/8"
1-1/4"
1-7/8"
1-3/8"
5/8"
1/16" THICK
7/16"
1-5/8"
1/8"
3/8"
1-1/8"
1"
1/16" THICK
1/2"
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 3
PlatingItem Number Finish* Price
A U CL JBK ANR 026 PN $2.20PB 2.25BL 2.30ST 2.30CF Call
1"
5/8"
1/4"
1/16" THICK
1-7/8"
7/8"
For use with D, K, M, S, V and P Cam Lock.
For use with D, K, M, V and P Round Style Plungers.
ROUND PLUNGER CUP STRIKE
For use with D, K, M, S, V and P Cam Locks.
ANTI-ROTATION PLATE
For use with D, K, M, S, V and P Cam Locks.
ANTI-ROTATION MOUNTING PLATE
ANTI-ROTATION “J” BRACKET
“U” CAM STRIKE
3/16" “L” STRIKE
3/8" “L” STRIKE
1/2" “L” STRIKE
13/16" “L” STRIKE
*Plating Finish: PN Polished Nickel; SN Satin Nickel; PB Polished Brass; SB Satin Brass; BL Matte Black; ST Statuary Bronze; ZN Zinc; CF Custom Finish
PlatingItem Number Finish* Price
A U CL PLT ANR 128 ZN $0.78CF Call
A4
Strikes/Mounting Plates 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Accessories
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
PlatingItem Number Finish* Price
STR 231 PN $0.68CF Call
PlatingItem Number Finish* Price
STR 261 SN $0.57SB 0.57CF Call
PlatingItem Number Finish* Price
A U CL PLT ANR 125 PN $2.73PB 2.78BL 2.84ST 2.84CF Call
PlatingItem Number Finish* Price
STR 232 PN $0.59CF Call
PlatingItem Number Finish* Price
STR 233 PN $0.64CF Call
PlatingItem Number Finish* Price
STR 234 PN $0.64CF Call
PlatingItem Number Finish* Price
STR 241 PN $1.89CF Call
ANTI-ROTATION MOUNTING PLATE/ 3 FINGER WASHER
PlatingItem Number Finish* Price
A U CL PLT ANR XXX BN $0.85
For use with D, K, M, S, V and P Cam Locks.Hole must be drilled 1-1/4" from edge of glass.
1-3/4"
1-1/4"
1/2"
1/32" THICK
1/4"
1-1/4"
3/4"
1/2"
1/32" THICK
3/8"
1-5/8"
1-1/4"
1/2"
1/32" THICK
1/2"
1-5/8"
1-1/4"
3/4"
1/16" THICK
5/8"
2-3/8"
1/2"
1"
1/16" THICK
5/8"
1-3/4"
1-1/4"
5/8"
1-1/4"
1/16" THICK
3/4"
7/8"
1.25
5/8"
7/16"
7/16"
1 5/8"
1 5/16"
5/8" BEND OVER TO PREVENTNUT FROM BACKING OUT
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 4
6 PIN CORE SPACER
Item Number Price
A I XX SPA XX6 PIN $0.63
PlatingItem Number Finish* Price
A I 40 PLT XXX LGE PC $5.88SC 5.88PB 5.88CF Call
PlatingItem Number Finish* Price
A I 50 RNG RNG 160 BL $0.23
PlatingItem Number Finish* Price
A I 40 PLT XXX SML PC $5.14SC 5.14PB 5.14CF Call
3" I.C. CORE CAM LOCK CAM
Included are: Qty. 6 #8 x 3/4” LG PHIL. HD. wood screws,Qty. 2 #6-32 x 3/8” & Qty 2 #6-32 x 7/16” PHIL. HD. machine screws.
Used to secure D, K, M, S and V Door/Drawer locks on wood.
For use with I50 Plunger Locks.
RUBBER “O” RING
For use with I Locks.
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Mounting Plates/Spacers/Cams
Accessories A5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
For use with I Cam Locks.
For use with D, K, M, S and V40 Plunger Locks.
STRIKE PLATE
MOUNTING PLATE
For use with CLI05 Cam Locks.
ANTI-ROTATION MOUNTING PLATE
For use with D, K, M and S50 Plunger Locks.Hole must be drilled 1-1/2" from edge of glass.
“J” BRACKET
For use with I Locks.
RED PLASTIC ACTUATOR
For use with I40 Plunger Locks. Screws are included at no charge.
SMALL SUPPORT PLATE
For use with I40 Plunger Locks.Screws are included at no charge.
LARGE SUPPORT PLATE
*Plating Finish: PN Polished Nickel; SN Satin Nickel; PB Polished Brass; BL Matte Black; PC Polished Chrome; SC Satin Chrome; RD Red; CF Custom Finish
PlatingItem Number Finish* Price
A U 50 JBK ANR XXX PN $2.95PB 3.00SN 3.00BL 3.00CF Call
PlatingItem Number Finish* Price
A I XX ACT XXX PLA RD $0.99
PlatingItem Number Finish* Price
A U 40 STR XTX XXX BN $0.54
Item Number Price
A I CL CAM 110 $1.65
2-1/8"
7/8"1/16"
THICK
1-1/2"
3/4"
1-1/2"
1-1/2"3-1/2"
3/4"
1-1/8"
1-1/2"3-1/2"
.060
1-5/8"
1-5/16"
4-1/2"
1-7/16"3/4"
2"
4"
3"
1-1/2"
1-1/16"
1/2"1/8"
3"
1/8"
1 1/2"
2"
3/8"
DRAWER/DOOR PULL SLOT
1/16"
7/8"
PlatingItem Number Finish* Price
A I CL PLT ANR XXX ZN $1.25CF Call
PlatingItem Number Finish* Price
A U DL PLT MNT XXX PN $3.75CF Call
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 5
3/8"
1/8"
1"
1-5/8"
3-3/8"
LENGTH
5/8"
PlatingItem Number Length Finish* Price
A U GL BAR SMT 240 24" BL $6.68360 36" 8.03480 48" 18.88CL Custom Call
PlatingItem Number Length Finish* Price
A U GL BAR FMT 240 24" BL $6.68360 36" 8.03480 48" 18.88CL Custom Call
PlatingItem Number Finish* Price
A U GL BGU CLO 065 PN $0.78
PlatingItem Number Length Finish* Price
A U XX PIN EXT 063 5/8" PN $1.30075 3/4" 1.30113 1-1/8" 1.30188 1-7/8" 1.30CL Custom Call
LEFT DRAWER CATCH
EXTENSION PIN
FRONT MOUNT GANG LOCK BAR
For use with D, K, M, S, V and I Gang Locks.
SIDE MOUNT GANG LOCK BAR
RIGHT DRAWER CATCH
For use with D, K, M, S, V and I Gang Locks.
ADJUSTABLE STOP
1/16" THICK SPLIT LOCK WASHER
CLOSED BAR GUIDE
OPEN BAR GUIDE
*Plating Finish: PN Polished Nickel; BL Matte Black; ZN Zinc
PlatingItem Number Finish* Price
A U DL CTH LFT XXX PN $3.85
A6
Gang Lock Hardware 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Accessories
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
PlatingItem Number Finish* Price
A U GL STP ADJ 065 PN $0.89
PlatingItem Number Finish* Price
A U XX WSH LKW 026 PN $0.10
PlatingItem Number Finish* Price
A U GL BGU OPN 065 ZN $0.49
PlatingItem Number Finish* Price
A U DL CTH RHT XXX PN $3.85
7/8"
1/2"
1/4-28 TAPPED HOLE
1/4" SPLIT LOCK WASHER
3/4"
1-1/2"
5/8"
1/16"
1/8"
5/8"
1-1/2"
3/4"1/32"
1"
1/8"
3/8"
1-5/8"
5/8"
LENGTH
2-1/8"
3/4"
1/4-28TAPPEDHOLE
5/8"
1/4" TYP.
1-1/8"
1-7/8"
1/4" TYP.
For use with self-closing Gang Lock drawers. For use with self-closing Gang Lock drawers.
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 6
PlatingItem Number Finish* Price
A U XX CTH ELB XXX PB $0.85CF Call
3/8"
1/8"
3/8"
5/8"
1-1/8"
PlatingItem Number Finish* Price
KEY RNG 001 RD $2.29BL 2.29
Item Number Price
A U CL ADP CAM $0.30
PlatingItem Number Finish* Price
A U CL CLP MNT XXX ZN $0.69CF Call
PlatingItem Number Finish* Price
A U XX TOL HEX 009 BL $12.00
PlatingItem Number Finish* Price
A U 60 BAR XB2 ADJ PN $4.99CF Call
PlatingItem Number Finish* Price
A U 60 BAR XB1 STD PN $4.04CF Call
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Miscellaneous
Accessories A7
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
ELBOW CATCH
For use with D, K and M Ratchet Locks.
4-3/8"
STANDARD BAR FOR RATCHET LOCK
For use with D, K and M Ratchet Locks.
Use to mount Standard Cams on to K, M, S and V Cam Locks.
1"
4-1/4"
1-1/2"
ADJUSTABLE BAR FOR RATCHET LOCK
CAM ADAPTER
MOUNTING CLIP
Call Customer Service to order desired screws.
#8-32THREAD
MOUNTING POST
For use with P Cam Locks.
3"
5/8"
3" CAM
For use with some D Locks.
Use to remove Security Screw from Plunger Locks.
PLUG REMOVAL TOOL
3/4"
2-1/8"
SECURITY HEX KEY
KEY RING (Wrist Strap)
*Plating Finish: PN Polished Nickel; SN Satin Nickel; PB Polished Brass BL Matte Black; ZN Zinc; RD Red; CF Custom Finish
PlatingItem Number Finish* Price
A U 40 PST MNT 036 SN $2.34PB 2.39
Item Number Price
A P CL CAM 110 $1.55
Item Number Price
A D XX TOL PLG $35.00
For use with K and M Cam Locks.
Use to secure the second door when using double doors.
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 7
Gang Lock PackageTo determine your item number enter the RED option code foreach section as in the example below.
A
B
C
CBA
GANG 3 C
GANG 3C A kit with three adjustable stops,three 1-1/8" pins, three lock washers, andfour closed bar guides.
A8
Packages/Cams 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Accessories
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
PIN
LOCK WASHER
ADJUSTABLE STOP
CLOSED BAR GUIDE
If a particular accessory is not shown in our catalog, pleasecontact Kenstan for assistance. Kenstan may have the partas a non-catalog item or we will modify an existing part tomeet your specific application. We offer prompt service in thedevelopment and quoting of custom accessory parts.
Cam Lock Glass Installation Package
A
B
C
CBA
PackageCLJK
Glass Thickness25 1/4"
Plating Finish PricePN Polished Nickel $ 3.00PB Polished Brass 3.05BL Matte Black 3.15ST Statuary Bronze 3.15 CF Custom Finish Call
CLJK 25 PN
CLJK 25 PN A kit with two flat nickel washers, one plastic, one rubber and onePolished Nickel “J” bracket.
METAL WASHER
“J” BRACKET
PLASTIC WASHER
RUBBER WASHER
METAL WASHER
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.765 17.616 21.46
Pin LengthA 5/8"B 3/4"C 1-1/8"D 1-7/8"
CAM TYPE Price
101 5/8" $ 0.43 102 3/4" 0.43103 7/8" 0.43104 1" 0.43105 1-1/8" 0.43106 1-1/4" 0.43107 1-3/8" 0.45108 1-1/2" 0.45110 1-3/4" 0.45112 2" 0.50116 2-1/2" 0.50
303 7/8" 0.60306 1-1/4" 0.65308 1-1/2" 0.65312 2" 0.70
403 7/8" 0.60404 1" 0.65406 1-1/4" 0.65408 1-1/2" 0.65410 1-3/4" 0.65412 2" 0.70414 2-1/4" 0.70
504 1" 0.65506 1-1/4" 0.65508 1-1/2" 0.65512 2" 0.70
606 1-1/4" 0.65608 1-1/2" 0.65610 1-3/4" 0.65612 2" 0.70
712 2" 2.00
202 3/4" 0.60204 1" 0.65206 1-1/4" 0.65208 1-1/2" 0.65210 1-3/4" 0.65
CL Call
LENGTH
OFFSET DIM
LENGTH
Cam Type
LENGTH
Note: All cams are reversible.
Straight Cam Offset Cam Hook Cam
CAMCAMCAMCAMCAMCAMCAMCAMCAMCAMCAM
CAMCAMCAMCAM
CAMCAMCAMCAMCAMCAMCAM
CAMCAMCAMCAM
CAMCAMCAMCAM
CAM
CAMCAMCAMCAMCAM
CL
STRAIGHT CAM
1/8” OFFSET CAM
1/4” OFFSET CAM
3/8” OFFSET CAM
1/2” OFFSET CAM
5/8” OFFSET CAM
HOOK CAM
CUSTOM CAM
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 8
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Terms and Conditions of Sale2008 KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
1. Pricing: Kenstan Lock reserves the right to institute price adjustments based upon fluctuation of material costs without prior notice. Orders, or balances of orders, that have not shipped within 6 months from the original order date may be subject to a price review.
2. Payment Terms: Terms on all orders, unless otherwise approved by Kenstan, are Net 30 Days from the date of the invoice. A service charge of 1.5% per month will be charged on overdue accounts.
3. Shipping: Please be sure to specify your preferred shipping method on every order. For all orders received without shipping instructions, Kenstan will use our discretion to make carrier selection based upon the most economical method of shipment available to meet your required in house date. Kenstan is not responsible for risk of loss or damage to products in transit with the selected carrier.
4. Deliveries: At Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within 2 weeks from the receipt of your order. Rush order and emergency services are available. Unless specifically prohibited in writing by the purchaser, Kenstan reserves the right to make partial shipments of any order.
5. Inspection: Kenstan Lock inspects all products in accordance with our standard quality control procedures. Upon receipt and inspection by the purchaser, any parts proven to be defective or not as ordered may be returned to Kenstan for repair or replacement following the conditions in the “Returned Goods” section (#6) below.
6. Returned Goods: Product replacement or account credit for any returned goods will be made solely at the discretion of Kenstan and will only be accepted upon the issuance of a Return Authorization number from Kenstan’s Customer Service Department. Merchandise proven to be defective, due to faulty material and/or workmanship, may be returned for full replacement or credit. Kenstan Lock Co. will only warranty locks and parts that were modified by our factory. Any product ordered incorrectly by the customer may be accepted for return and subject to a 50% handling charge. Locks made with special or out-of production parts are not returnable, unless prior arrangements have been made. Returned merchandise that is damaged in transit, due to inadequate return packaging, will not be accepted.
7. Warranty: Kenstan Lock warrants, for a period of one year from delivery, that our products are free from defects in material and workmanship and makes no other warranties, expressed or implied, including but not limited to the degree of security or the purchaser’s application or use of our product. In the event of a product defect, Kenstan shall only be responsible to the extent of the cost of our product, and will not accept any claims for labor or loss of merchandise.
8. Cancellation: If all or any part of an order is cancelled before the completion of the product assembly by Kenstan, the purchaser shall be responsible for payment of all assembled items as well as any special parts ordered for items remaining unassembled at the time of cancellation. If pricing on the original order was based upon Kenstan’s quantity discount, a partial cancellation may affect the pricing on items already shipped and invoiced and a price adjustment will be made.
9. Catalog Dimensions and Sample Policy: Please be aware that all lock and part drawing dimensions carry a tolerance of plus or minus 1/16’’ and are for reference only. Please contact us for actual dimensions. Samples of all of our products are available upon request.
Since 1963, Kenstan Lock Company has manufactured several lines of high-quality showcase and cabinet locks, each with their own unique security features. Each year, we continue to enhance our existing prod-uct lines, while adding new products to meet the ever-changing needs of our commercial, industrial and retail clients. We also offer a wide range of door hardware locks, such as mortise and rim cylinders, as well as le-ver and tubular handles for fitting rooms, stock rooms, offices, etc.
Our product lines are complimented by Kenstan as-sociates who are available to assist you with security layouts, keying plans and custom products as needed.
Each of our lines, and all of our products, are manu-factured using the highest standards of quality and we stand behind each and every product we deliver. From the quality products assembled in our factory to our shipping and customer service departments, our goal is to provide the best service possible, from start to finish.
At Kenstan, we take pride in our reputation that has been built on quality products, reliability and the excep-tional customer service that our clients depend on.