kelowna general hospital luminaire schedule ......150 mm aperture, 26 watt triple tube compact...
TRANSCRIPT
KELOWNA GENERAL HOSPITAL Luminaire Schedule INTERIOR HEART AND SURGICAL CENTRE Page 1 of 4
Luminaire Schedule
Type Description
A1 Recessed direct-indirect 305mm x 1220mm fluorescent troffer with die-formed 22 gauge cold-rolled steel housing and symmetrical flat acrylic lens. Two 32 watt T8 lamps and 120 volt electronic ballast
Zumtobel ML series Or Equivalent A1d Recessed direct-indirect 305mm x 1220mm fluorescent troffer with die-formed 22 gauge
cold-rolled steel housing and symmetrical flat acrylic lens, two 32 watt T8 lamps and 120 volt electronic dimming (0-10VDC) ballast
Zumtobel ML series Or Equivalent A2d Recessed direct-indirect 610mm x 1220mm fluorescent troffer with die-formed 22 gauge
cold-rolled steel housing and symmetrical flat acrylic lens, two 32 watt T8 lamps and 120 volt electronic dimming (0-10VDC) ballast
Zumtobel ML series Or Equivalent A5d Recessed direct-indirect 610mm x 610mm fluorescent troffer with die-formed 22 gauge
cold-rolled steel housing and symmetrical flat acrylic lens, two 40 watt TT5 lamps and 120 volt electronic dimming (0-10VDC) ballast
Zumtobel ML series Or Equivalent AP1d Recessed 200mm x 1220 mm fluorescent patient luminaire with direct-indirect basket,
gasketted clear lower lens, asymmetric distribution, two 32 watt T8 lamps, 120 volt electronic dimming (0-10VDC) ballast
Kenall MEC8 series Or Equivalent B Recessed 305 x 1220 mm specification grade fluorescent troffer with white housing, white
flush hinged lens door frame, .125 inch A12 lens, one 32 watt T8 lamp, 120 volt electronic ballast.
Metalux GC series Or Equivalent B1 Recessed 305 x 1220 mm specification grade fluorescent troffer with white housing, white
flush hinged lens door frame, .125 inch A12 lens, two 32 watt T8 lamps, 120 volt electronic ballast.
Metalux GC series Or Equivalent
KELOWNA GENERAL HOSPITAL Luminaire Schedule INTERIOR HEART AND SURGICAL CENTRE Page 2 of 4
Type Description
B11 Recessed 305 x 1220 mm specification wet location fluorescent troffer with white housing, white flush hinged lens door frame, .125 inch A12 lens with smooth side out, two 32 watt T8 lamps, 120 volt electronic ballast.
Lithonia WRT series Or Equivalent C4 Wall mounted 1220 mm length specification grade fluorescent luminaire with steel
housing, white acrylic diffuser, two 32 watt T8 lamps, 120 volt electronic ballast. HE Williams WMAT8 series Or Equivalent CL1 Recessed 305mm x 1220mm fluorescent luminaire with gasketted lens door frame with
K12 prismatic lens with smooth side out, IP65 rated, two 32 watt T8 lamps, 120 volt electronic ballast
Fail-Safe ORM series Or Equivalent CL2d Recessed 610mm x 1220mm fluorescent luminaire with gasketted lens door frame with
K12 prismatic lens with smooth side out, IP65 rated, two 32 watt T8 lamps, 120 volt electronic dimmable (0-10VDC) ballast
Fail-Safe ORM series Or Equivalent CL3d Recessed 610mm x 1220mm fluorescent luminaire with gasketted lens door frame with
K12 prismatic lens with smooth side out, IP65 rated, three 32 watt T8 lamps, 120 volt electronic dimmable (0-10VDC) ballast
Fail-Safe ORM series Or Equivalent D2 Recessed downlight with self flanged clear Alzak medium beam reflector with haze finish,
150 mm aperture, 26 watt triple tube compact fluorescent lamp in vertical position, 120 volt electronic ballast.
Portfolio C6042E-6001H series Or Equivalent D2d Recessed downlight with self flanged clear Alzak medium beam reflector with haze finish,
150 mm aperture, 26 watt triple tube compact fluorescent lamp in vertical position, 120 volt electronic dimming (0-10VDC) ballast.
Portfolio C6042E-6001H series Or Equivalent D2Ld Recessed downlight with 150 mm clear lensed downlight, specular upper reflector, haze
lower trim with gasketted clear lens, 26 watt triple tube compact fluorescent lamp in horizontal position, 120 volt electronic dimming (0-10VDC) ballast
Portfolio C6042E-6081H3 series Or Equivalent
KELOWNA GENERAL HOSPITAL Luminaire Schedule INTERIOR HEART AND SURGICAL CENTRE Page 3 of 4
Type Description
D4 Recessed downlight with self flanged clear Alzak medium beam reflector with haze finish, 200mm aperture, 42 watt triple tube compact fluorescent lamp in vertical position with 120 volt electronic ballast.
Portfolio C8042E-8001H series Or Equivalent D5 Recessed exterior downlight complete with 190mm aperture, prismatic lens, custom
colour splay, damp location rating, 42W triple tube compact fluorescent lamp in horizontal position, 120 volt electronic ballast
Lithonia LP6FN series Or Approved Equivalent D7 Recessed exterior downlight complete with 190mm aperture, prismatic lens, custom
colour splay, damp location rating, 150W ED17 ceramic metal halide lamp in vertical position, 120 volt electronic ballast
Lithonia LP6FN series Or Equivalent DRd Recessed downlight with 150 mm clear lensed downlight, self flanged clear Alzak medium
beam reflector with haze finish with gasketted clear lens at bottom, IP65 rated, 42 watt triple tube compact fluorescent lamp in vertical position, 120 volt electronic dimming (0-10VDC) ballast
Kenall M2DL series Or Equivalent L1 Suspended linear fluorescent luminaire with extruded aluminum housing, white opal
lens, stainless steel suspension cables, one 28W T5 lamp, 120 volt electronic ballast Deltalight Random series Or Equivalent NL1 Recessed wall mounted LED night light complete with white louvred faceplate, red, white
or amber LED source (to determined after reviewing one white LED and one amber LED samples to be provided prior to manufacturing of remaining white or amber version), 120 volt to fit in standard single gang junction box.
Fail-Safe Circadian MSN-UNV series Or Equivalent OR1 Recessed 610mm x 1220mm surgical fluorescent luminaire with gasketted lens door
frame with K12 prismatic lens with smooth side out, IP65 rated, four 32 watt T8 lamps, two 32 watt T8 green lamps, separate 120 volt electronic dimmable (0-10VDC) ballasts for white and green lamps
Kenall ORM series Or Approved Equivalent P Direct/Indirect pole light with top reflector, anti-glare ring, 150 watt ED17 pulse start metal
halide lamp, 3.6m (12 foot) straight round steel pole, 120 volt electronic ballast Deco Lighting D814 series Or Equivalent
KELOWNA GENERAL HOSPITAL Luminaire Schedule INTERIOR HEART AND SURGICAL CENTRE Page 4 of 4
Type Description
P1 Pole luminaire specified as follows: One luminaire head with die-cast aluminum housing and hinged lens door, Alzak
segmented reflector with light distribution noted on drawings, glass tempered lens, 175 watt pulse start clear ED28 metal halide lamp, 120 volt high power factor pulse start ballast
3.6m (16 foot) straight round steel pole, round pole base cover Luminaire head, pole and pole base cover shall have custom colour powder coat finish
based on Tiger Drylac RAL powder coat colour to be determined during shop drawing review.
Gardco Gullwing G13 series Or Equivalent PB Bollard light with round aluminum housing, 1068mm (42 inches) height, 70W ED17 metal
halide lamp, colour to be determined during shop drawing review, 120 volt electronic ballast
Gardco BR162 series Or Equivalent SL1 Surface mounted 1220 mm (4’ nominal) slot light complete with continuous extruded
aluminum housing, white internal reflector for direct light distribution, 95 mm (3.75” nominal width) opening, seamless white opal acrylic lens and natural aluminum finish, one 28 watt T5 lamp, 120 volt electronic ballast
aLight Accolade3 series Or Equivalent U1 Exterior inground uplight with polycarbonate housing, black finish, stainless steel trim,
tempered glass lens, adjustable specular reflector, medium flood distribution, 39 watt T6 metal halide lamp, 120 volt electronic ballast
Lumiere Monaco 6000N series Or Approved Equivalent U2 Pendant mounted exterior uplight with aluminum housing, solid visor, pendant with yoke,
specular reflector, microprismatic gasketted lens, damp location rated, 70 watt T6 metal halide lamp, 120 volt electronic ballast
Amertrix C-Scroll series W1 Decorative wall sconce with aluminum trim, white acrylic lens, one 26 watt quad compact
fluorescent lamp, 120 volt electronic ballast OCL Wing WW1 series Or Equivalent
ML4___
Recessed
IBEW Union MadeUS patent pending PCT/EP01/01269US patent pending PCT/EP01/01270US Patent D 477,891
1' x 4'
Suitable for damp locationsNYC Approved
LISTEDC USUL®
FluorescentOne or Two Lamp T8
Applications: An innovative lighting chamber concept with five center diffuser options including SYNTO optics shielding the lamp(s) from view, while directing light where needed in a glare-free and efficient way. Ideal for offices, retail, health care and educational facilities. Fixtures with optional blue, green and yellow acrylic color inserts give the diffusers a uniform, softly tinted glow.
Type: Quantity: Project:
ML™
FIXTURE/CEILING TYPE LENGTH LAMPING OPTIC BALLAST/VOLTAGE OPTIONS
ML4 1X2 T5 / T5 HO / T5TT LAMPING 311ML4 2X2 T5 / T5 HO / T5TT LAMPING 312ML4 1X4 T5 / T5 HO LAMPING 313ML4 2X4 T5 / T5 HO LAMPING 314
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on www.zumtobel.us are the most recent version and supersede all other versions that exist in any other printed or electronic form.
TEL (845) 691-6262(800) 932-0633 FAX (845) 691-6289
www.zumtobel.us ML4-15
Zumtobel Lighting Inc. ©20113300 Route 9WHighland, NY 12528-2630
07/12/11
ECO-10 and EcoSystem are trademarks of Lutron Electronics Co., Inc. HiLume is a registered trademark of Lutron Electronics Co., Inc.
OTHER ML4 FAMILY LUMINAIRES FIF #
ML4 1X2 T8 LAMPING 608ML4 2X2 T8 LAMPING 609ML4 2X4 T8 LAMPING 611ML4A SURFACE MOUNT 315
OTHER ML4 FAMILY LUMINAIRES FIF #
1. Housing - 20 gauge cold-rolled steel. Finish is powder-coated white. Post painted. Right-angle access plate allows feed from top or side of unit.
2. Light Chamber - Powder-coated high-reflectance white interior reflector and shaped extruded acrylic diffusers. Fixtures available with optional color inlays in blue, green, or yellow.
3. Optics - MP: Clear, extruded micro-pyramidal optic diffuser and clear acrylic inlay. OL: Extruded, opal acrylic lens. MD: Metal grid in Titan finish, backed with a translucent opal acrylic extruded lens. C/W: Matte or white finish 16-cell SYNTO louver
has blades 7/8" high by 17/16" o.c. Optional opal inlay is white acrylic. Optic assembly pulls down for lamp access.
4. Lamps/Sockets - One or two T8 fluo-rescent lamps with medium bi-pin (G-13) sockets. Wattage options include standard 32W T8, higher lumen output 32W T8 XP and energy saving 25W, 28W or 30W T8. Lamps supplied by others.
5. Ballast - Universal voltage, high efficiency electronic 120/277V ballast with normal ballast factor (0.87). Consult factory for 347V and other ballast require-ments. Ballasts are mounted in luminaire. Accessible from below.
6. Dimming - In control fixtures with Lutron EcoSystem dimming, control wires are brought to an interface. Consult factory for location of control wire feed.Consult factory for specific dimming requirements other than those listed above.
7. Mounting - Integral bend out tabs are provided in the universal (ML4U and ML4F) ceiling fixture types. Adjustable mounting brackets provided for selected concealed T-bar or gypsum board (ML4E) ceiling installations.
8. Standby Battery Pack - Integral standby battery pack with integral test switch.
9. Weight - 22.0 lbs.
Lead Time?Double-click on http://www.zumtobel.us/PDB?lang=EN&gid=10068&iso2=USfor Lead Times.A = ZOOM! Quick Ship - ships in 2 weeks B = ships in 4 weeks C = ships in 8 weeks
online Find it Fast 610
Includes SYNTO optics
14 1' x 4'ML4U ML Recessed 15/16" Lay-In, Flush 9/16" Slot-Grid, Flush 9/16" Lay-In, Tegular
ML4F ML Recessed 9/16" Lay-In, Flush
ML4E ML Recessed Concealed
MP Micro-Pyramidal Optic
OL Opal Acrylic Lens
MD MicroGrid Diffuser, Titan
C Matte SYNTO Louver
W White SYNTO Louver
CO Matte SYNTO Louver with Frosted Inlay
WO White SYNTO Louver with Frosted Inlay
For flange details, see next page
U Universal 120/277V347 347VDA_* Dimming, Analog (0-10V) DD_* Dimming, DALIDE_* Dimming, Lutron ECO-10™ DH_* Dimming, Lutron HiLume®
DSC_* Dimming, Lutron EcoSystem™, Control FixtureDSN_* Dimming, Lutron EcoSystem™, Non-control FixtureSTDM_* Dimming, Step
WF Whip Flex 3/8" X 6' 14 AWGWN_* Whip Flex 3/8" X 6' 14 AWG (NYC)EM1_* Standby Battery Pack/1 lampSS Separate SwitchingAR Air ReturnCP Chicago PlenumF FusingCB2** Color inlay, blueCG2** Color inlay, greenCY2** Color inlay, yellow
* Specify “1” for 120V or “2” for 277V. Some lamp types may not be available. ** Can be ordered with complete fixtures only. To order separately consult factory.STDM not available for 347V.
14
1328 (1) 32W T82328 (2) 32W T81328XP (1) 32W T8, Higher Output2328XP (2) 32W T8, Higher Output1258 (1) 25W T82258 (2) 25W T81288 (1) 28W T82288 (2) 28W T81308 (1) 30W T82308 (2) 30W T8
ZOOM! 2-week delivery on items shown in gray
12"11"
11 3/4"
4 1/8"
ML4U / ML4F Side ViewML4U / ML4F Cross-Section
48"
47"
47 3/4"
Please note ML4E fixtures are 5-1/4" deep.
48"
4 1/8"
Sheetrock cutout dimension (ML4E): 11 5/16" X 47 7/16"
ML4___
Recessed
IBEW Union MadeUS patent pending PCT/EP01/01269US patent pending PCT/EP01/01270US Patent D 477,891
1' x 4'
Suitable for damp locationsNYC Approved
LISTEDC USUL®
FluorescentOne or Two Lamp T8
Applications: An innovative lighting chamber concept with five center diffuser options including SYNTO optics shielding the lamp(s) from view, while directing light where needed in a glare-free and efficient way. Ideal for offices, retail, health care and educational facilities. Fixtures with optional blue, green and yellow acrylic color inserts give the diffusers a uniform, softly tinted glow.
Type: Quantity: Project:
ML™
FIXTURE/CEILING TYPE LENGTH LAMPING OPTIC BALLAST/VOLTAGE OPTIONS
ML4 1X2 T5 / T5 HO / T5TT LAMPING 311ML4 2X2 T5 / T5 HO / T5TT LAMPING 312ML4 1X4 T5 / T5 HO LAMPING 313ML4 2X4 T5 / T5 HO LAMPING 314
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on www.zumtobel.us are the most recent version and supersede all other versions that exist in any other printed or electronic form.
TEL (845) 691-6262(800) 932-0633 FAX (845) 691-6289
www.zumtobel.us ML4-15
Zumtobel Lighting Inc. ©20113300 Route 9WHighland, NY 12528-2630
07/12/11
ECO-10 and EcoSystem are trademarks of Lutron Electronics Co., Inc. HiLume is a registered trademark of Lutron Electronics Co., Inc.
OTHER ML4 FAMILY LUMINAIRES FIF #
ML4 1X2 T8 LAMPING 608ML4 2X2 T8 LAMPING 609ML4 2X4 T8 LAMPING 611ML4A SURFACE MOUNT 315
OTHER ML4 FAMILY LUMINAIRES FIF #
1. Housing - 20 gauge cold-rolled steel. Finish is powder-coated white. Post painted. Right-angle access plate allows feed from top or side of unit.
2. Light Chamber - Powder-coated high-reflectance white interior reflector and shaped extruded acrylic diffusers. Fixtures available with optional color inlays in blue, green, or yellow.
3. Optics - MP: Clear, extruded micro-pyramidal optic diffuser and clear acrylic inlay. OL: Extruded, opal acrylic lens. MD: Metal grid in Titan finish, backed with a translucent opal acrylic extruded lens. C/W: Matte or white finish 16-cell SYNTO louver
has blades 7/8" high by 17/16" o.c. Optional opal inlay is white acrylic. Optic assembly pulls down for lamp access.
4. Lamps/Sockets - One or two T8 fluo-rescent lamps with medium bi-pin (G-13) sockets. Wattage options include standard 32W T8, higher lumen output 32W T8 XP and energy saving 25W, 28W or 30W T8. Lamps supplied by others.
5. Ballast - Universal voltage, high efficiency electronic 120/277V ballast with normal ballast factor (0.87). Consult factory for 347V and other ballast require-ments. Ballasts are mounted in luminaire. Accessible from below.
6. Dimming - In control fixtures with Lutron EcoSystem dimming, control wires are brought to an interface. Consult factory for location of control wire feed.Consult factory for specific dimming requirements other than those listed above.
7. Mounting - Integral bend out tabs are provided in the universal (ML4U and ML4F) ceiling fixture types. Adjustable mounting brackets provided for selected concealed T-bar or gypsum board (ML4E) ceiling installations.
8. Standby Battery Pack - Integral standby battery pack with integral test switch.
9. Weight - 22.0 lbs.
Lead Time?Double-click on http://www.zumtobel.us/PDB?lang=EN&gid=10068&iso2=USfor Lead Times.A = ZOOM! Quick Ship - ships in 2 weeks B = ships in 4 weeks C = ships in 8 weeks
online Find it Fast 610
Includes SYNTO optics
14 1' x 4'ML4U ML Recessed 15/16" Lay-In, Flush 9/16" Slot-Grid, Flush 9/16" Lay-In, Tegular
ML4F ML Recessed 9/16" Lay-In, Flush
ML4E ML Recessed Concealed
MP Micro-Pyramidal Optic
OL Opal Acrylic Lens
MD MicroGrid Diffuser, Titan
C Matte SYNTO Louver
W White SYNTO Louver
CO Matte SYNTO Louver with Frosted Inlay
WO White SYNTO Louver with Frosted Inlay
For flange details, see next page
U Universal 120/277V347 347VDA_* Dimming, Analog (0-10V) DD_* Dimming, DALIDE_* Dimming, Lutron ECO-10™ DH_* Dimming, Lutron HiLume®
DSC_* Dimming, Lutron EcoSystem™, Control FixtureDSN_* Dimming, Lutron EcoSystem™, Non-control FixtureSTDM_* Dimming, Step
WF Whip Flex 3/8" X 6' 14 AWGWN_* Whip Flex 3/8" X 6' 14 AWG (NYC)EM1_* Standby Battery Pack/1 lampSS Separate SwitchingAR Air ReturnCP Chicago PlenumF FusingCB2** Color inlay, blueCG2** Color inlay, greenCY2** Color inlay, yellow
* Specify “1” for 120V or “2” for 277V. Some lamp types may not be available. ** Can be ordered with complete fixtures only. To order separately consult factory.STDM not available for 347V.
14
1328 (1) 32W T82328 (2) 32W T81328XP (1) 32W T8, Higher Output2328XP (2) 32W T8, Higher Output1258 (1) 25W T82258 (2) 25W T81288 (1) 28W T82288 (2) 28W T81308 (1) 30W T82308 (2) 30W T8
ZOOM! 2-week delivery on items shown in gray
12"11"
11 3/4"
4 1/8"
ML4U / ML4F Side ViewML4U / ML4F Cross-Section
48"
47"
47 3/4"
Please note ML4E fixtures are 5-1/4" deep.
48"
4 1/8"
Sheetrock cutout dimension (ML4E): 11 5/16" X 47 7/16"
ML4___
Recessed
IBEW Union MadeUS patent pending PCT/EP01/01269US patent pending PCT/EP01/01270US Patent D 477,891
2' x 4'
Suitable for damp locationsNYC Approved
LISTEDC USUL®
FluorescentOne or Two Lamp T8
Applications: An innovative lighting chamber concept with five center diffuser options including SYNTO optics shielding the lamp(s) from view, while directing light where needed in a glare-free and efficient way. Ideal for offices, retail, health care and educational facilities. Fixtures with optional blue, green and yellow acrylic color inserts give the diffusers a uniform, softly tinted glow.
Type: Quantity: Project:
ML™
FIXTURE/CEILING TYPE LENGTH LAMPING OPTIC BALLAST/VOLTAGE OPTIONS
ML4 1X2 T5 / T5 HO / T5TT LAMPING 311ML4 2X2 T5 / T5 HO / T5TT LAMPING 312ML4 1X4 T5 / T5 HO LAMPING 313ML4 2X4 T5 / T5 HO LAMPING 314
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on www.zumtobel.us are the most recent version and supersede all other versions that exist in any other printed or electronic form.
TEL (845) 691-6262(800) 932-0633 FAX (845) 691-6289
www.zumtobel.us ML4-16
Zumtobel Lighting Inc. ©20113300 Route 9WHighland, NY 12528-2630
07/12/11
ECO-10 and EcoSystem are trademarks of Lutron Electronics Co., Inc. HiLume is a registered trademark of Lutron Electronics Co., Inc.
OTHER ML4 FAMILY LUMINAIRES FIF #
ML4 1X2 T8 LAMPING 608ML4 2X2 T8 LAMPING 609ML4 1X4 T8 LAMPING 610ML4A SURFACE MOUNT 315
OTHER ML4 FAMILY LUMINAIRES FIF #
1. Housing - 20 gauge cold-rolled steel. Finish is powder-coated white. Post painted. Right-angle access plate allows feed from top or side of unit.
2. Light Chamber - Powder-coated high-reflectance white interior reflector and shaped extruded acrylic diffusers. Fixtures available with optional color inlays in blue, green, or yellow.
3. Optics - MP: Clear, extruded micro-pyramidal optic diffuser and clear acrylic inlay. OL: Extruded, opal acrylic lens. MD: Metal grid in Titan finish, backed with a translucent opal acrylic extruded lens. C/W: Matte or white finish 16-cell SYNTO
louver has blades 7/8" high by 17/16" o.c. Optional opal inlay is white acrylic. Optic assembly pulls down for lamp access.
4. Lamps/Sockets - One or two T8 fluorescent lamps with medium bi-pin (G-13) sockets. Wattage options include standard 32W T8, higher lumen output 32W T8 XP and energy saving 25W, 28W or 30W T8. Lamps supplied by others.
5. Ballast - Universal voltage, high efficiency electronic 120/277V ballast with normal ballast factor (0.87). Consult factory for 347V and other ballast require-ments. Ballasts are mounted in luminaire. Accessible from below.
6. Dimming - In control fixtures with Lutron EcoSystem dimming, control wires "are brought to an interface. Consult factory for location of control wire feed.Consult factory for specific dimming requirements other than those listed above.
7. Mounting - Integral bend out tabs are provided in the universal (ML4U and ML4F) ceiling fixture types. Adjustable mounting brackets provided for selected concealed T-bar or gypsum board (ML4E) ceiling installations.
8. Standby Battery Pack - Integral standby battery pack with integral test switch.
9. Weight - 40.0 lbs.
Lead Time?Double-click on http://www.zumtobel.us/PDB?lang=EN&gid=10068&iso2=USfor Lead Times.A = ZOOM! Quick Ship - ships in 2 weeks B = ships in 4 weeks C = ships in 8 weeks
online Find it Fast 611
Includes SYNTO optics
24 2' x 4' 1328 (1) 32W T82328 (2) 32W T81328XP (1) 32W T8, Higher Output2328XP (2) 32W T8, Higher Output1258 (1) 25W T82258 (2) 25W T81288 (1) 28W T82288 (2) 28W T81308 (1) 30W T82308 (2) 30W T8
ML4U ML Recessed 15/16" Lay-In, Flush 9/16" Slot-Grid, Flush 9/16" Lay-In, Tegular
ML4F ML Recessed 9/16" Lay-In, Flush
ML4E ML Recessed Concealed
MP Micro-Pyramidal Optic
OL Opal Acrylic Lens
MD MicroGrid Diffuser, Titan
C Matte SYNTO Louver
W White SYNTO Louver
CO Matte SYNTO Louver with Frosted Inlay
WO White SYNTO Louver with Frosted Inlay
For flange details, see next page
U Universal 120/277V347 347VDA_* Dimming, Analog (0-10V) DD_* Dimming, DALIDE_* Dimming, Lutron ECO-10™ DH_* Dimming, Lutron HiLume®
DSC_* Dimming, Lutron EcoSystem™, Control FixtureDSN_* Dimming, Lutron EcoSystem™, Non-control FixtureSTDM_* Dimming, Step
WF Whip Flex 3/8" X 6' 14 AWGWN_* Whip Flex 3/8" X 6' 14 AWG (NYC)EM1_* Standby Battery Pack/1 lampSS Separate SwitchingAR Air ReturnCP Chicago PlenumF FusingCB2** Color inlay, blueCG2** Color inlay, greenCY2** Color inlay, yellow
* Specify “1” for 120V or “2” for 277V. Some lamp types may not be available. ** Can be ordered with complete fixtures only. To order separately consult factory.STDM not available for 347V.
24
ZOOM! 2-week delivery on items shown in gray
ML4U / ML4F Cross-Section
24"23"
23 3/4"
ML4U / ML4F Side View
48"
47"
47 3/4"
4 1/8"
48"
Please note ML4E fixtures are 5-1/4" deep.
4 1/8"
Sheetrock cutout dimension (ML4E): 23 5/16" X 47 7/16"
ML4___ 22
Recessed
IBEW Union MadeUS patent pending PCT/EP01/01269US patent pending PCT/EP01/01270US Patent D 477,891
2' x 2'
Suitable for damp locationsNYC Approved
LISTEDC USUL®
FluorescentTwo Lamp 14W T5Two Lamp 24W T5HOOne Lamp 40W/50W/55W T5TTTwo Lamp 40W T5TTApplications: An innovative lighting chamber concept with five center diffuser options including SYNTO optics shielding the lamp(s) from view, while directing light where needed in a glare-free and efficient way. Ideal for offices, retail, health care and educational facilities. Fixtures with optional blue, green and yellow acrylic color inserts give the diffusers a uniform, softly tinted glow.
Type: Quantity: Project:
ML™
FIXTURE/CEILING TYPE LENGTH LAMPING OPTIC BALLAST/VOLTAGE OPTIONS
ML4 1X2 T5 / T5 HO / T5TT LAMPING 311ML4 1X4 T5 / T5 HO LAMPING 313ML4 2X4 T5 / T5 HO LAMPING 314ML4A SURFACE MOUNT 315
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on www.zumtobel.us are the most recent version and supersede all other versions that exist in any other printed or electronic form.
TEL (845) 691-6262(800) 932-0633 FAX (845) 691-6289
www.zumtobel.us ML4-9
Zumtobel Lighting Inc. ©20113300 Route 9WHighland, NY 12528-2630
07/12/11
ECO-10 and EcoSystem are trademarks of Lutron Electronics Co., Inc. HiLume is a registered trademark of Lutron Electronics Co., Inc.
ML4 1X2 T8 LAMPING 608ML4 2X2 T8 LAMPING 609ML4 1X4 T8 LAMPING 610ML4 2X4 T8 LAMPING 611
1. Housing - 20 gauge cold-rolled steel. Finish is powder-coated white. Post painted. Right-angle access plate allows feed from top or side of unit.
2. Light Chamber - Powder-coated high-reflectance white interior reflector and shaped extruded acrylic diffusers. Fixtures available with optional color inlays in blue, green, or yellow.
3. Optics - MP: Clear, extruded micro-pyramidal optic diffuser and clear acrylic inlay. OL: Extruded, opal acrylic lens. MD: Metal grid in Titan finish, backed with a translucent opal acrylic extruded lens. C/W: Matte or white finish 16-cell SYNTO louver
has blades 7/8" high by 17/16" o.c. Optional opal inlay is white acrylic. Optic assembly pulls down for lamp access.
4. Lamps/Sockets - One or two 40W or one 50W/55W compact fluorescent lamps, with 2G11 four-pin lamp sockets. Two 14W T5 or 24W T5 HO fluorescent lamps with miniature bi-pin sockets. Lamps supplied by others.
5. Ballast - Universal voltage electronic 120/277V ballast. Consult factory for 347V. Ballasts are mounted in luminaire. Accessible from below.
6. Dimming - In control fixtures with
Lutron EcoSystem dimming, control wires are brought to an interface. Consult factory for location of control wire feed.Consult factory for specific dimming requirements other than those listed above.
7. Mounting - Integral bend out tabs are provided in the universal (ML4U and ML4F) ceiling fixture types. Adjustable mounting brackets provided for selected concealed T-bar or gypsum board (ML4E) ceiling installations.
8. Standby Battery Pack - Integral standby battery pack with integral test switch.
9. Weight - 22.0 lbs.
Lead Time? Double-click on http://www.zumtobel.us/PDB?lang=EN&gid=11079&iso2=USA = ZOOM! Quick Ship - ships in 2 weeks B = ships in 4 weeks C = ships in 8 weeks
ZOOM! 2-week delivery on items shown in gray
online Find it Fast 312
Includes SYNTO optics
Meets RP-1-04 guidelines for normal (1405 MP/MD/C/W, 2405 C, 1505 C, 2245 C/W) VDT-use environments.
22 2' x 2' 1405 (1) 40W T5TT1505 (1) 50W T5TT1555 (1) 55W T5TT2405 (2) 40W T5TT2145 (2) 14W T52245 (2) 24W T5 HO
ML4U ML Recessed 15/16" Lay-In, Flush 9/16" Slot-Grid, Flush 9/16" Lay-In, Tegular
ML4F ML Recessed 9/16" Lay-In, Flush
ML4E ML Recessed Concealed
MP Micro-Pyramidal Optic
OL Opal Acrylic Lens
MD MicroGrid Diffuser, Titan
C Matte SYNTO Louver
W White SYNTO Louver
CO Matte SYNTO Louver with Frosted Inlay
WO White SYNTO Louver with Frosted InlayFor flange details,
see next page
U Universal 120/277V347 347VDA_* Dimming, Analog (0-10V) DD_* Dimming, DALIDE_* Dimming, Lutron ECO-10™ DH_* Dimming, Lutron HiLume®
DSC_* Dimming, Lutron EcoSystem™, Control FixtureDSN_* Dimming, Lutron EcoSystem™, Non-control FixtureSTDM_* Dimming, Step
WF Whip Flex 3/8" X 6' 14 AWGWN_* Whip Flex 3/8" X 6' 14 AWG (NYC)EM1_* Standby Battery Pack/1 lampSS Separate SwitchingAR Air ReturnCP Chicago PlenumF FusingCB2** Color inlay, blueCG2** Color inlay, greenCY2** Color inlay, yellow
ML4U / ML4F Side ViewML4U / ML4F Cross-Section, (1) T5TT Lamp
24"23"
23 3/4"
4 1/8"
24"23"
23 3/4"
* Specify “1” for 120V or “2” for 277V. Some lamp types may not be available. ** Can be ordered with complete fixtures only. To order separately consult factory.STDM only available with 14W T5 lamps. STDM not available for 347V.
ML4U / ML4F Cross-Section, (2) T5TT Lamps
24"23"
23 3/4"
4 1/8"1 3/4"
4 1/8"
Please note ML4E fixtures are 5-1/4" deep.
OTHER ML4 FAMILY LUMINAIRES FIF # OTHER ML4 FAMILY LUMINAIRES FIF #
Sheetrock cutout dimension (ML4E): 23 7/16" X 23 7/16"
ModelMEC8 8"MEC12 12"
Nominal Length48 4' 60 5' (MEC8 only)
Mounting OptionsS SurfaceG Grid (1")F Flange
MEC_8_12-120711
When you see this image, you will know the Kenall product shown or described is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. Content of speci�cation sheets is subject to change; please consult www.kenall.com for current product details. © 2011 Kenall Mfg. Co. All rights reserved.
www. kenall.com P: 800-4-Kenall F: 847-360-1781 1020 Lakeside Drive Gurnee, Illinois 60031
SPECIFICATIONS:
HOUSING: Flange and Grid – 20-gauge CRS; Surface – 18-gauge CRS. One-piece seam welded construction. Housing flange (Flange/Grid): 18-gauge CRS, standard 4-piece construction, spot welded to housing. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; reflectance: 92%.
DOORFRAME: Heavy duty extruded aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables (IB-AC) to provide NSF2 listing, or an optional continuous hinged doorframe (IB-HD). Select in ordering options below. Phillips head stainless steel fasteners secure door to housing – 8 on IB-AC option; 3 on IB-HD option. Closed cell silicone gasket seals doorframe to housing.
LAMP SHIELDING: Perforated steel (white TGIC polyester powder coat finish) with pearlescent diffuser.
ELECTRICAL: Fluorescent electronic 120-277V ballasts high power factor (<10% THD). See Ordering Information for optional equipment. Lamps by others.
INSTALLATION: SURFACE MOUNT: Four .312" diameter holes. GRID MOUNT: Designed for 1" grid. Includes hardware to secure hanger wire. FLANGE MOUNT: – Yoke brackets : Fixture mounting hardware included. Install Frame (Accessory): Positively locates yoke brackets within ceiling opening; assures alignment of fixture. No measuring for yoke required; no drywall backing required (included with frame assembly).
LISTINGS: UL and CUL Listed for Wet Location and UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone (IB-AC only).
PRODUCT FEATURES: » Ceiling mount – 8"×48", 8"×60", 12"×48"
» Exam light with asymmetric optics for shadow-free illumination
» Ingress Barrier Door provides consistent surface for cleanability
Model Lamp QuantityLength Mounting Option Voltage Options
ORDERING INFORMATIONAccessoryLamp Type
DIMENSIONAL DATA (IN INCHES) A B C D E MEC848 (T5) 3.25 8.00×47.00 8.75×47.75 8.25** 47.25MEC860 (T5) 3.25 8.00×59.00 8.75×59.75 8.25** 59.25
MEC12 (T5) 4.25 11.00×47.00 11.75×47.75 11.25** 47.25MEC12 (T8) 4.25 11.00×48.75 11.75×49.50 11.25** 49.00 **Add .25" to each cut-out dimension when Install Frame (IF) Accessory is specified
Lamp Quantity 1 One Lamp2 Two Lamps
Lamp Type4' Lengths28▲ F28T532 F32T8 (MEC12 only)54 F54T5HO
5' Lengths (MEC8 only)35▲ F35T580 F80T5HO
Ballast TypeIS Instant Start Electronic, 10% THD (T8)RS Rapid Start Electronic, 10% THD (T8,T5, T5H0) Voltage120 120 Volts277 277 Volts347 347 Volts
DoorframeAC Ingress Barrier w/Aircraft Cables (Std.)HD Ingress Barrier w/Continuous Piano Hinge (not NSF2 listed)
OptionsAMF Antimicrobial Finish on exposed surfaces FS Fuse & HolderRF▲ Radio Frequency Filter
AccessoryIF Install Frame (Flange only)
▲n/a with 347V
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number
Approved by
B
A
C
E
D
Ballast Type
RECOMMENDED CEILING CUTOUT/ SURFACE MOUNTING HOLES
CROSS SECTION
MEC SERIES
MEDMASTER™ IP65 NSF2
IB-AC ONLY
Doorframe
IB-
Exam Luminaires for Patient Rooms
COOPER LIGHTING - METALUX®
Catalog # Type
Date
Project
Comments
Prepared by
LAMPS CONTAIN MERCURY. DISPOSE ACCORDINGTO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means ofdisconnecting power.
5-5/8"[143mm]
11-3/4" [298mm]
COOPER LIGHTING
DESCRIPT ION
The GC Series features a deep para-contoured fixture housing, high
reflectivity and optimum lamp to lens spacing. The series produces
total uniformity of light in the luminous area and is compatible with all
of today’s popular ceiling systems and is available with a number of
options and accessories for application versatility.
The specification luminaire is designed to offer maximum efficiency
and performance for today’s unique interior specifications. The GC
Series is an excellent choice for commercial office spaces, schools, hos-
pitals or retail merchandising areas.
EB Ballast & STD Lamps
128T8 (27), 228T8 (48), 328T8 (67)
132 (30), 232 (55), 332 (81)
Luminaire Efficacy Rating
LER = FL-54
Catalog Number: GC-132A
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $4.44
Luminaire Efficacy Rating
LER = FL-56
Catalog Number: GC-232A
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $4.29
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Consult Pre Sales Technical Support.
GC128T8, 228T8
328T8132, 232, 332
1 ' X 4 ' T R O F F E R
1 , 2 O R 3 T 8 L A M P S
Specification Deep Troffer
ADF090602
E N E R G Y DATA
Input Watts:
SPEC IF ICAT ION FEATURES
A …C o n s t r u c t i o n
5-5/8" deep, para-contoured
housing, die formed code
gauge, prime cold rolled steel.
Die embossed housing has full
length die formed stiffeners for
added strength. Ballast/ wireway
cover easily removed without
tools. Die formed captive lam-
pholder bracket fully encloses
lamp-holder wiring permitting
easy lampholder replacement.
Heavy endplates are securely
attached with interlocking tabs
and screws. Four auxiliary fix-
ture end suspension points pro-
vided. KOs for continuous row
wiring. Endplates have integral
Grid-Lock feature for safety and
convenience.
B …E l e c t r i c a l *
Ballasts are CBM/ETL Class “P”
and are positively secured by
mounting bolts. Pressure lock
lampholders. UL/CUL listed.
Suitable for damp locations.**
C …F i n i s h
Multistage, iron phosphate pre-
treatment ensures maximum
bonding and rust inhibitor.
Lighting grade, baked white
enamel finish.
L A M P C O N F I G U R AT I O N S
A B C DE
11-3/4"[298mm]
48" [1219mm]
Access Plate7/8" [22mm] K.O. (2)1-1/2" [38mm]
5-1/4" [133mm]
6-1/4" [159mm]3-1/2" [89mm]
7/8" [22mm] K.O. (2)
5-5/8"[143mm]
11-3/4"[298mm]
5-5/8"[143mm]
11-3/4"[298mm]
X X=3-1/4" [83mm]
M O U N T I N G DATA D O O R F R A M E S
GC GCFA GCRAFlat, White Flat, Extruded Deep, Regressed,Steel White Aluminum Extruded White Aluminum
D …H i n g i n g / L a t ch i n g
Positive cam action spring
loaded steel latches with baked
white enamel finish. Safety-lock
T-hinges allow hinging and
latching either side.
E …Fr a m e / S h i e l d i n g
Flat extruded aluminum door
with reinforced mitered corners
and baked white enamel finish.
Quadrasealed to prevent light
spillage. Light stabilized 100%
virgin acrylic prismatic shield-
ing. Standard #15 pattern.
Optional shielding available.
5-5/8"
[143mm]
11-3/4"
[298mm]
X X=3-1/4"
[83mm]
2 LAMP1 LAMP 3 LAMP
C E I L I N G C O M PAT I B I L I T Y
G
Grid/Lay-in
Standard
G
Concealed T
G
Slot Grid
F
Aluminum Flange Trim
With Supporting
Swing Gates
MZ
Modular Trim
With Supporting
Swing Gates
Ceiling Trim
Type Type
Exposed Grid G
Concealed T G
Slot Grid G
Flange F
Concealed “T” or ”Z“ MZ
Metal Pan MZ
(Verify compatibility/ consult
Pre Sales Technical Support.)
Visit our web site at www.cooperlighting.comCustomer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/09 ADF009602
Coeff i c i en ts o f Ut i l i za t ion
Effective floor cavity reflectance 20%
rc 80% 70% 50% 30% 10% 0%
rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
RCR
0
1
2
3
4
5
6
7
8
9
10
Typ ica l VCP Percentages
Height Along Height Across
Room Size (Ft.) 8.5’ 10.0’ 8.5’ 10.0’
20 x 20
30 x 30
30 x 60
60 x 30
60 x 60
Zona l Lumen Summary
Zone Lumens %Lamp %Fixture
0-30
0-40
0-60
0-90
0-180
P H OTO M E T R I C S
G C T 8 1 ' x 4 '
||
⊥
Cande la
Angle Along II 45° Across ⊥0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
GC-232A
Electronic Ballast
F32T8/35K Lamps
2800 Lumens
Spacing criterion:
(II) 1.2 x mounting
height, (⊥) 1.2 x
mounting height
Efficiency 64.2%
Test Report:
GC232A.IES
LER = FL-56
Yearly Cost of 1000
lumens, 3000 hrs at
.08 KWH = $4.29
Coeff i c i en ts o f Ut i l i za t ion
Effective floor cavity reflectance 20%
rc 80% 70% 50% 30% 10% 0%
rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
RCR
0
1
2
3
4
5
6
7
8
9
10
Typ ica l VCP Percentages
Height Along Height Across
Room Size (Ft.) 8.5’ 10.0’ 8.5’ 10.0’
20 x 20
30 x 30
30 x 60
60 x 30
60 x 60
Zona l Lumen Summary
Zone Lumens %Lamp %Fixture
0-30
0-40
0-60
0-90
0-180
||
⊥
Cande la
Angle Along II 45° Across ⊥0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
GC-132A
Electronic Ballast
F32T8/35K Lamps
2800 Lumens
Spacing criterion:
(II) 1.2 x mounting
height, (⊥) 1.4 x
mounting height
Efficiency 67.9%
Test Report:
GC132A.IES
LER = FL-54
Yearly Cost of 1000
lumens, 3000 hrs
at .08 KWH = $4.44
` 766 766 766
762 766 767
752 763 769
737 755 770
714 742 767
681 723 756
637 694 730
583 649 680
520 578 590
441 491 472
351 386 361
277 280 269
215 192 195
160 127 146
117 86 118
89 73 99
67 62 75
36 34 39
0 0 0
1567 1567 1567
1555 1564 1565
1535 1549 1553
1502 1519 1526
1451 1472 1483
1381 1405 1414
1287 1313 1310
1172 1193 1181
1036 1045 1028
872 868 858
692 698 667
538 516 489
407 351 358
300 235 272
220 161 220
169 135 184
127 115 139
69 64 73
0 0 0
81 81 81 81 79 79 79 79 75 75 75 72 72 72 69 69 69 68
75 72 70 67 73 71 68 66 68 66 64 65 64 62 63 61 60 59
69 64 60 57 68 63 59 56 61 58 55 59 56 54 57 55 53 51
64 58 53 49 62 57 52 49 55 51 48 53 50 47 51 49 46 45
59 52 47 43 58 51 46 42 49 45 42 48 44 41 47 43 41 39
54 47 41 37 53 46 41 37 44 40 36 43 39 36 42 38 36 34
50 42 36 32 49 41 36 32 40 36 32 39 35 32 38 34 32 30
47 38 32 29 45 37 32 28 36 32 28 36 31 28 35 31 28 27
43 34 29 25 42 34 28 25 33 28 25 32 28 25 31 27 24 23
40 31 25 22 39 30 25 22 30 25 21 29 24 21 28 24 21 20
37 28 23 19 36 28 23 19 27 22 19 26 22 19 26 22 19 18
76 76 76 76 75 75 75 75 71 71 71 68 68 68 65 65 65 64
71 68 66 64 69 67 65 63 64 62 61 62 60 59 59 58 57 56
66 61 57 54 64 60 56 53 58 55 52 56 53 51 54 52 50 49
61 55 50 47 59 54 50 46 52 48 46 50 47 45 49 46 44 43
56 49 44 41 55 49 44 40 47 43 40 46 42 39 44 41 39 38
52 44 39 35 50 44 39 35 42 38 35 41 37 34 40 37 34 33
48 40 35 31 47 40 35 31 38 34 31 37 33 30 36 33 30 29
44 36 31 27 43 36 31 27 35 30 27 34 30 27 33 30 27 26
41 33 28 24 40 32 27 24 32 27 24 31 27 24 30 26 24 22
38 30 24 21 37 29 24 21 28 24 21 28 24 21 27 23 21 19
35 27 22 19 34 27 22 19 26 22 19 25 21 18 25 21 18 17
75 79 74 79
69 73 68 72
60 64 58 62
70 74 69 74
60 63 58 62
1223 21.8 34.0
1962 35.0 54.6
3089 55.2 85.9
3594 64.2 100.0
3594 64.2 100.0
62 67 62 67
54 59 53 58
44 48 42 46
56 61 55 60
45 48 43 47
619 22.1 32.6
1018 36.3 53.6
1629 58.2 85.7
1900 67.9 100.0
1900 67.9 100.0
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : G C - 1 3 2 A- U N V- E B 8 1- U
Number of
Lamps(2)
1, 2 or 3 lamps
Series
C=Specification Deep Troffer
Trim Type
G=Grid/Lay-in – Standard (1)
G=Concealed T
G=Slot Grid
F=Aluminum Flange Trim (5)
MZ=Modular Trim
EMZ=Modular Trim
(Extended Swing Arm)
Doorframes
Standard=Flat White Steel Door
(Leave Blank)
FA=Flush White Extruded
Aluminum c/w Spring Latch
RA=Regressed White Extruded
Aluminum (3/8")
FAN=Flush Natural Anodized
Extruded Aluminum
RAN=Regressed Natural Anodized
Extruded Aluminum (3/8")
FAB=Flush Black Extruded
Aluminum
RAB=Regressed Black Extruded
Aluminum (3/8")
Shielding
A=#12 Pattern Acrylic
A125=#12 Pattern Acrylic
(.125" Thickness)
A19/156=#19 Pattern
Acrylic (.156" Thickness)
DA=Dropped Dish Matte
White Acrylic
IMA48=Injection Molded
Acrylic (.150" Thickness)
PB1S=1/2" x 1/2" x 1/2"
Silver Parabolic Louver
(Styrene)
Width
Blank=1' Width
Options
GL=Single Element Fuse
GM=Double Element
Fuse
Flex=Flex Installed
(Reference Flex ordering
information)
EL=Emergency Installed
Lamps Installed
Blank=No Lamps Installed
L8835=T8 Lamp, 28W and
32W, 3500K (6)
L8841=T8 Lamp, 28W and
32W, 4100K (6)
L8835HL=T8 Lamp, 32W,
3500K, 3100 Lumens
L8841HL=T8 Lamp, 32W,
4100K, 3100 Lumens
Options
PAF=Painted After
Fabrication
RIF1=Radio
Interference
Suppressor
20GA/REP=20 Gauge Riveted
Endplates. For use in New York City.
RLS=Rotor-Lock Socket (T8 Lamps Only)
(See options & accessories )
Packaging
U=Unit Pack
PAL=Job Pack,
out of carton
PALC=Job
Pack, in cartonWattage (Length)
28T8=28W T8 (48")
32=32W T8 (48")
Voltage (3)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal
Voltage 120-277 (4)
NOTES: (1)
An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. (2)
Standard off-cen-
ter ballast compartment on 3-lamp fixtures. (3)
Products also available in non-US voltages and frequencies for interna-
tional markets. (4)
Not available when specifying emergencies, voltage must be specific. (5)
Specify row configuration,
type in catalog number when ordering complete fixture. (6)
When utilizing 28W T8 lamps, HPT8 Ballast must be spefi-
cied.
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change
without notice. Consult your Cooper Lighting Representative for availability and ordering information.
GC-132A 19 lbs.
GC-232A 19 lbs.
GC-332A 19 lbs.
S H I P P I N G I N F O R M AT I O N
Catalog No. Wt.
Ballast Type(3)
EB8 =T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
EB8 /PLUS=T8 Electronic Instant Start.
High Ballast Factor >1.13.
Total Harmonic Distortion < 10%
ER8 =T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
HPT8 Ballast
HB8 L=T8 Electronic Instant Start. Low Ballast Factor .77
HB8 =T8 Electronic Instant Start. Ballast Factor .88
HB8 N=T8 Electronic Instant Start. Normal Ballast Factor 1.0
HB8 H=T8 Electronic Instant Start. High Ballast Factor 1.15-1.2
HR8 DIM=T8 Electronic Program Start Step Dimming. Ballast Factor .88
HR8 L=T8 Electronic Program Start. Low Ballast Factor .77
HR8 =T8 Electronic Program Start. Ballast Factor .88
HR8 H=T8 Electronic Program Start. High Ballast Factor 1.15-1.2
No. of Ballast1 or 2
No. of Ballast1 or 2
No. of Ballast1 or 2
Rating
Blank=
Standard
NY=New York
City Rated
ATW-SW4=
Chicago
Rated
Option – Aluminum Flange Trim (5)
Blank=SW (Single White)
Type Color
‘S’ Single ‘N’ Natural
‘R’ In Row ‘W’ White
‘E’ End of Row
A C C E S S O R I E S
EQ-CLIP-U=T-BAR Safety Earthquake Clips(1)
COOPER LIGHTING - METALUX®
Catalog # Type
Date
Project
Comments
Prepared by
LAMPS CONTAIN MERCURY. DISPOSE ACCORDINGTO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means ofdisconnecting power.
5-5/8"[143mm]
11-3/4" [298mm]
COOPER LIGHTING
DESCRIPT ION
The GC Series features a deep para-contoured fixture housing, high
reflectivity and optimum lamp to lens spacing. The series produces
total uniformity of light in the luminous area and is compatible with all
of today’s popular ceiling systems and is available with a number of
options and accessories for application versatility.
The specification luminaire is designed to offer maximum efficiency
and performance for today’s unique interior specifications. The GC
Series is an excellent choice for commercial office spaces, schools, hos-
pitals or retail merchandising areas.
EB Ballast & STD Lamps
128T8 (27), 228T8 (48), 328T8 (67)
132 (30), 232 (55), 332 (81)
Luminaire Efficacy Rating
LER = FL-54
Catalog Number: GC-132A
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $4.44
Luminaire Efficacy Rating
LER = FL-56
Catalog Number: GC-232A
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $4.29
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Consult Pre Sales Technical Support.
GC128T8, 228T8
328T8132, 232, 332
1 ' X 4 ' T R O F F E R
1 , 2 O R 3 T 8 L A M P S
Specification Deep Troffer
ADF090602
E N E R G Y DATA
Input Watts:
SPEC IF ICAT ION FEATURES
A …C o n s t r u c t i o n
5-5/8" deep, para-contoured
housing, die formed code
gauge, prime cold rolled steel.
Die embossed housing has full
length die formed stiffeners for
added strength. Ballast/ wireway
cover easily removed without
tools. Die formed captive lam-
pholder bracket fully encloses
lamp-holder wiring permitting
easy lampholder replacement.
Heavy endplates are securely
attached with interlocking tabs
and screws. Four auxiliary fix-
ture end suspension points pro-
vided. KOs for continuous row
wiring. Endplates have integral
Grid-Lock feature for safety and
convenience.
B …E l e c t r i c a l *
Ballasts are CBM/ETL Class “P”
and are positively secured by
mounting bolts. Pressure lock
lampholders. UL/CUL listed.
Suitable for damp locations.**
C …F i n i s h
Multistage, iron phosphate pre-
treatment ensures maximum
bonding and rust inhibitor.
Lighting grade, baked white
enamel finish.
L A M P C O N F I G U R AT I O N S
A B C DE
11-3/4"[298mm]
48" [1219mm]
Access Plate7/8" [22mm] K.O. (2)1-1/2" [38mm]
5-1/4" [133mm]
6-1/4" [159mm]3-1/2" [89mm]
7/8" [22mm] K.O. (2)
5-5/8"[143mm]
11-3/4"[298mm]
5-5/8"[143mm]
11-3/4"[298mm]
X X=3-1/4" [83mm]
M O U N T I N G DATA D O O R F R A M E S
GC GCFA GCRAFlat, White Flat, Extruded Deep, Regressed,Steel White Aluminum Extruded White Aluminum
D …H i n g i n g / L a t ch i n g
Positive cam action spring
loaded steel latches with baked
white enamel finish. Safety-lock
T-hinges allow hinging and
latching either side.
E …Fr a m e / S h i e l d i n g
Flat extruded aluminum door
with reinforced mitered corners
and baked white enamel finish.
Quadrasealed to prevent light
spillage. Light stabilized 100%
virgin acrylic prismatic shield-
ing. Standard #15 pattern.
Optional shielding available.
5-5/8"
[143mm]
11-3/4"
[298mm]
X X=3-1/4"
[83mm]
2 LAMP1 LAMP 3 LAMP
C E I L I N G C O M PAT I B I L I T Y
G
Grid/Lay-in
Standard
G
Concealed T
G
Slot Grid
F
Aluminum Flange Trim
With Supporting
Swing Gates
MZ
Modular Trim
With Supporting
Swing Gates
Ceiling Trim
Type Type
Exposed Grid G
Concealed T G
Slot Grid G
Flange F
Concealed “T” or ”Z“ MZ
Metal Pan MZ
(Verify compatibility/ consult
Pre Sales Technical Support.)
Visit our web site at www.cooperlighting.comCustomer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/09 ADF009602
Coeff i c i en ts o f Ut i l i za t ion
Effective floor cavity reflectance 20%
rc 80% 70% 50% 30% 10% 0%
rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
RCR
0
1
2
3
4
5
6
7
8
9
10
Typ ica l VCP Percentages
Height Along Height Across
Room Size (Ft.) 8.5’ 10.0’ 8.5’ 10.0’
20 x 20
30 x 30
30 x 60
60 x 30
60 x 60
Zona l Lumen Summary
Zone Lumens %Lamp %Fixture
0-30
0-40
0-60
0-90
0-180
P H OTO M E T R I C S
G C T 8 1 ' x 4 '
||
⊥
Cande la
Angle Along II 45° Across ⊥0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
GC-232A
Electronic Ballast
F32T8/35K Lamps
2800 Lumens
Spacing criterion:
(II) 1.2 x mounting
height, (⊥) 1.2 x
mounting height
Efficiency 64.2%
Test Report:
GC232A.IES
LER = FL-56
Yearly Cost of 1000
lumens, 3000 hrs at
.08 KWH = $4.29
Coeff i c i en ts o f Ut i l i za t ion
Effective floor cavity reflectance 20%
rc 80% 70% 50% 30% 10% 0%
rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
RCR
0
1
2
3
4
5
6
7
8
9
10
Typ ica l VCP Percentages
Height Along Height Across
Room Size (Ft.) 8.5’ 10.0’ 8.5’ 10.0’
20 x 20
30 x 30
30 x 60
60 x 30
60 x 60
Zona l Lumen Summary
Zone Lumens %Lamp %Fixture
0-30
0-40
0-60
0-90
0-180
||
⊥
Cande la
Angle Along II 45° Across ⊥0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
GC-132A
Electronic Ballast
F32T8/35K Lamps
2800 Lumens
Spacing criterion:
(II) 1.2 x mounting
height, (⊥) 1.4 x
mounting height
Efficiency 67.9%
Test Report:
GC132A.IES
LER = FL-54
Yearly Cost of 1000
lumens, 3000 hrs
at .08 KWH = $4.44
` 766 766 766
762 766 767
752 763 769
737 755 770
714 742 767
681 723 756
637 694 730
583 649 680
520 578 590
441 491 472
351 386 361
277 280 269
215 192 195
160 127 146
117 86 118
89 73 99
67 62 75
36 34 39
0 0 0
1567 1567 1567
1555 1564 1565
1535 1549 1553
1502 1519 1526
1451 1472 1483
1381 1405 1414
1287 1313 1310
1172 1193 1181
1036 1045 1028
872 868 858
692 698 667
538 516 489
407 351 358
300 235 272
220 161 220
169 135 184
127 115 139
69 64 73
0 0 0
81 81 81 81 79 79 79 79 75 75 75 72 72 72 69 69 69 68
75 72 70 67 73 71 68 66 68 66 64 65 64 62 63 61 60 59
69 64 60 57 68 63 59 56 61 58 55 59 56 54 57 55 53 51
64 58 53 49 62 57 52 49 55 51 48 53 50 47 51 49 46 45
59 52 47 43 58 51 46 42 49 45 42 48 44 41 47 43 41 39
54 47 41 37 53 46 41 37 44 40 36 43 39 36 42 38 36 34
50 42 36 32 49 41 36 32 40 36 32 39 35 32 38 34 32 30
47 38 32 29 45 37 32 28 36 32 28 36 31 28 35 31 28 27
43 34 29 25 42 34 28 25 33 28 25 32 28 25 31 27 24 23
40 31 25 22 39 30 25 22 30 25 21 29 24 21 28 24 21 20
37 28 23 19 36 28 23 19 27 22 19 26 22 19 26 22 19 18
76 76 76 76 75 75 75 75 71 71 71 68 68 68 65 65 65 64
71 68 66 64 69 67 65 63 64 62 61 62 60 59 59 58 57 56
66 61 57 54 64 60 56 53 58 55 52 56 53 51 54 52 50 49
61 55 50 47 59 54 50 46 52 48 46 50 47 45 49 46 44 43
56 49 44 41 55 49 44 40 47 43 40 46 42 39 44 41 39 38
52 44 39 35 50 44 39 35 42 38 35 41 37 34 40 37 34 33
48 40 35 31 47 40 35 31 38 34 31 37 33 30 36 33 30 29
44 36 31 27 43 36 31 27 35 30 27 34 30 27 33 30 27 26
41 33 28 24 40 32 27 24 32 27 24 31 27 24 30 26 24 22
38 30 24 21 37 29 24 21 28 24 21 28 24 21 27 23 21 19
35 27 22 19 34 27 22 19 26 22 19 25 21 18 25 21 18 17
75 79 74 79
69 73 68 72
60 64 58 62
70 74 69 74
60 63 58 62
1223 21.8 34.0
1962 35.0 54.6
3089 55.2 85.9
3594 64.2 100.0
3594 64.2 100.0
62 67 62 67
54 59 53 58
44 48 42 46
56 61 55 60
45 48 43 47
619 22.1 32.6
1018 36.3 53.6
1629 58.2 85.7
1900 67.9 100.0
1900 67.9 100.0
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : G C - 1 3 2 A- U N V- E B 8 1- U
Number of
Lamps(2)
1, 2 or 3 lamps
Series
C=Specification Deep Troffer
Trim Type
G=Grid/Lay-in – Standard (1)
G=Concealed T
G=Slot Grid
F=Aluminum Flange Trim (5)
MZ=Modular Trim
EMZ=Modular Trim
(Extended Swing Arm)
Doorframes
Standard=Flat White Steel Door
(Leave Blank)
FA=Flush White Extruded
Aluminum c/w Spring Latch
RA=Regressed White Extruded
Aluminum (3/8")
FAN=Flush Natural Anodized
Extruded Aluminum
RAN=Regressed Natural Anodized
Extruded Aluminum (3/8")
FAB=Flush Black Extruded
Aluminum
RAB=Regressed Black Extruded
Aluminum (3/8")
Shielding
A=#12 Pattern Acrylic
A125=#12 Pattern Acrylic
(.125" Thickness)
A19/156=#19 Pattern
Acrylic (.156" Thickness)
DA=Dropped Dish Matte
White Acrylic
IMA48=Injection Molded
Acrylic (.150" Thickness)
PB1S=1/2" x 1/2" x 1/2"
Silver Parabolic Louver
(Styrene)
Width
Blank=1' Width
Options
GL=Single Element Fuse
GM=Double Element
Fuse
Flex=Flex Installed
(Reference Flex ordering
information)
EL=Emergency Installed
Lamps Installed
Blank=No Lamps Installed
L8835=T8 Lamp, 28W and
32W, 3500K (6)
L8841=T8 Lamp, 28W and
32W, 4100K (6)
L8835HL=T8 Lamp, 32W,
3500K, 3100 Lumens
L8841HL=T8 Lamp, 32W,
4100K, 3100 Lumens
Options
PAF=Painted After
Fabrication
RIF1=Radio
Interference
Suppressor
20GA/REP=20 Gauge Riveted
Endplates. For use in New York City.
RLS=Rotor-Lock Socket (T8 Lamps Only)
(See options & accessories )
Packaging
U=Unit Pack
PAL=Job Pack,
out of carton
PALC=Job
Pack, in cartonWattage (Length)
28T8=28W T8 (48")
32=32W T8 (48")
Voltage (3)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal
Voltage 120-277 (4)
NOTES: (1)
An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. (2)
Standard off-cen-
ter ballast compartment on 3-lamp fixtures. (3)
Products also available in non-US voltages and frequencies for interna-
tional markets. (4)
Not available when specifying emergencies, voltage must be specific. (5)
Specify row configuration,
type in catalog number when ordering complete fixture. (6)
When utilizing 28W T8 lamps, HPT8 Ballast must be spefi-
cied.
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change
without notice. Consult your Cooper Lighting Representative for availability and ordering information.
GC-132A 19 lbs.
GC-232A 19 lbs.
GC-332A 19 lbs.
S H I P P I N G I N F O R M AT I O N
Catalog No. Wt.
Ballast Type(3)
EB8 =T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
EB8 /PLUS=T8 Electronic Instant Start.
High Ballast Factor >1.13.
Total Harmonic Distortion < 10%
ER8 =T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
HPT8 Ballast
HB8 L=T8 Electronic Instant Start. Low Ballast Factor .77
HB8 =T8 Electronic Instant Start. Ballast Factor .88
HB8 N=T8 Electronic Instant Start. Normal Ballast Factor 1.0
HB8 H=T8 Electronic Instant Start. High Ballast Factor 1.15-1.2
HR8 DIM=T8 Electronic Program Start Step Dimming. Ballast Factor .88
HR8 L=T8 Electronic Program Start. Low Ballast Factor .77
HR8 =T8 Electronic Program Start. Ballast Factor .88
HR8 H=T8 Electronic Program Start. High Ballast Factor 1.15-1.2
No. of Ballast1 or 2
No. of Ballast1 or 2
No. of Ballast1 or 2
Rating
Blank=
Standard
NY=New York
City Rated
ATW-SW4=
Chicago
Rated
Option – Aluminum Flange Trim (5)
Blank=SW (Single White)
Type Color
‘S’ Single ‘N’ Natural
‘R’ In Row ‘W’ White
‘E’ End of Row
A C C E S S O R I E S
EQ-CLIP-U=T-BAR Safety Earthquake Clips(1)
129www.lithonia.com | 1-800-315-4963PSG10
LITHO
NIA
SPECIA
L AP
PLICATIO
NS
WET LO
CATION
Series Trim Number of lamps1 Lamp type Door
WRT Recessed wet location troffer, 1' wide
2WRT Recessed wet location troffer, 2' wide
G Lay-in grid trim
F Overlapping flanged trim
1
2
3
4
6
Not included.
17 17W T8 (24")
32 32W T8 (48")
U31 31W T8-U (24", 1-5/8" leg)
U316 31W T8-U (24", 6" leg)
28T5 28W T5 (46")
(blank) Flush aluminum, white
FN Flush aluminum, natural
FM Flush aluminum, matte black2
Diffuser 3 Voltage Ballast configuration Ballast Options4
A12125 #12 pattern acrylic, .125" thick
A15 #15 pattern acrylic, .2" thick
A19 #19 pattern acrylic, .156" thick
MVOLT
120
277
347
(blank) Standard configuration
1/3 One 3-lamp ballast
1/4 One 4-lamp ballast
GEB10IS T8 electronic ballast, ≤10% THD, instant start
GEB10RS T8 electronic ballast, ≤10% THD, programmed rapid start
GEB10PS T5 electronic ballast, ≤10% THD, programmed rapid start
CSA Meets Canadian standards (347V only)
NOM Meets Mexican standards
WRTIntended Use
Ideal for showers, locker
rooms, recreational facilities
and other applications call-
ing for a wet location listing.
Certain airborne con-
taminants can diminish
integrity of acrylic. Refer
to Acrylic Environmental
Compatibility tables on
pages 794-795 for suit-
able uses.
Construction
Code-gauge steel housing. All
metal parts are finished with
electrostatically deposited,
thermally set polyester pow-
der paint after fabrication.
Closed-cell neoprene
gasketing between the lens,
door frame, housing and
mounting surface.
Extruded aluminum door
framefeatures mitered corners.
Installation
General illumination for
indoor and outdoor, covered-
ceiling locations.
Available for grid or flange
ceiling types.
Listings
UL Listed (standard) and CSA
Certified (standard; except
for 347V – see Options). NOM
Certified (see Options). UL
Listed for 25°C ambient and
wet locations for covered-
ceiling applications.
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: 2WRT G 2 32 A12125 MVOLT GEB10IS
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
CONFIGURATIONSNOMINAL
SIZESERIES
NUMBER OF LAMPS
LAMP TYPE
DEPTH
1' x 4' WRT 1, 2, 3 32 4-1/2 (11.4)1' x 4' WRT 1, 2 28T5 4-1/2 (11.4)2' x 2' 2WRT 2 17, U31 3-3/4 (9.5)2' x 2' 2WRT 2 U316 3-3/4 (9.5)2' x 2' 2WRT 3 17, U31 3-3/4 (9.5)2' x 2' 2WRT 4 17 3-3/4 (9.5)2' x 4' 2WRT 2, 3, 4, 6 32 3-3/4 (9.5)2' x 4' 2WRT 2, 3, 4 28T5 3-3/4 (9.5)
12(30.5)
WRT 2WRT
24(61.0)
4-1/2(11.4)
3-3/4(9.5)
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.
Notes1 See Configurations table for lamp compatibility.
2 Not available with 4-lamp fixture.
3 Add suffix V for internal prisms. Example: A12125V.
4 For other options, see pages 148-149.
Wet Location Lensed TrofferPRODUCT INFORMATION
H.E. Williams, Inc. Car thage, Missouri www.hewilliams.com 417-358-4065 Fax: 417-358-6015
VOLTAGE:
SUBMITTAL:
JOB:
TYPE:
Wall Wash/Mount Page 5A
SPECIFICATIONSHousing – 20-gauge C.R.S. fixture channel. Front housing constructed of marine grade extruded aluminum with die-cast aluminum end caps.Reflective Surfaces – 92% minimum average reflective white polyester powder coat on interior steel components.Shielding – Acrylic, pattern #12, .125” thick.Finish – Textured matte white polyester TGIC powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.Electrical – Electronic ballast standard, instant start T8, rated Class P.Mounting – Wall.Labels – UL/CUL listed as fluorescent luminaire suitable for dry or damp locations.
ARCHITECTURAL WALL MOUNT WMA
June 6, 2011
EXAMPLE WMA - 4 - 2 32 - A - OPTIONS - EB2 - UNV t t t t t t t t SERIES NOMINAL TOTAL WATTAGE/ SHIELDING OPTIONS BALLAST VOLTAGE LENGTH LAMPS TYPE TYPE
FEATURESXX Available in various uplight, downlight, closed-top, and divided lamp options.XX Pull switches and grounded convenience outlet options available (120V only).XX Various housing color options available, including optional anti-microbial powder coating available to prevent the spread of dangerous micro-organisms and suppress the growth of mold and bacteria.XX Tool-less access to lamps by removing front housing from fixture channel.XX Die-cast aluminum end caps.XX Keyhole mounting for easy installation.XX Tamper-resistant screws available.XX This fixture is proudly made in the USA.
Shown with DL
Shown with DL1U
Shown with DL2U
5-3/4”
6-1/2”
ORDERING INFORMATION
SERIESWMA T8 Architectural Wall Mount
NOMINAL LENGTH2 2’3 3’4 4’
TOTAL LAMPS1, 2, or 3
LAMP WATTAGE/TYPE2’ LAMP OPTIONS
17 2’, 17-watt T83’ LAMP OPTIONS
25 3’, 25-watt T84’ LAMP OPTIONS
32 4’, 32-watt T8
SHIELDINGA Acrylic, pattern #12, .125” thick
OPTIONSFor generic EM ballast options (must specify voltage), see Information section.PSR1 Single-circuit pull switch on right (120V only)1
PS2R Two-circuit, 4-position pull switch on right (120V only; requires two ballasts per fixture)
PSL1 Single-circuit pull switch on left (120V only)1
OPTIONS (Continued)
PS2L Two-circuit, 4-position pull switch on left (120V only; requires two ballasts per fixture)
GCOL Grounded convenience outlet on left (120V only)
GCOR Grounded convenience outlet on right (120V only)
DL1 Divided light with one lamp up, one lamp down (2-lamp fixture only, requires two ballasts)1
DL1U1 Divided light with one lamp up (3-lamp fixture only, requires two ballasts)1
DL2U1 Divided light with two lamps up (3-lamp fixture only, requires two ballasts)1
OCC ____ 2 Factory-installed occupancy sensor must be specified as follows: OCCWS FS-505-FS-PP___2
CT Closed-topTP3 Tamper-resistant (holt head) screws3
AMW Anti-microbial white finish
BALLAST TYPEFor complete ballast offering, see Information section.EB1 1-lamp electronic ballastEB2 2-lamp electronic ballastEB3 3-lamp electronic ballast
VOLTAGE120 120V277 277V
UNV 120-277V347 347V
T8
1 When divided light unit is equipped with single-circuit pull switch (PSR or PSL), pull switch operates the down light.
2 Factory-installed occupancy sensor available with 120V or 277V only, must specify.
3 This option requires a tamper-resistant tool (must be ordered separately). Please specify quantity required per project.
H.E . W ill iams, Inc . C ar thage, Missour i w w w.hewilliams . com 417-35 8 - 4 0 6 5 F a x : 417-35 8 - 6 015Information contained herein is subject to change without notice.
Wall Wash/Mount Page 5B HEWJP59448 06/07/11RJ
PHOTOMETRY INFORMATION Catalog #: WMA-4-232-A CANDLEPOWER DISTRIBUTION
Vertical Angle
Horizontal Angle ZonalLumens
0°
100°
110°
120°
130°
140°
150°160°
170°180°
10°20°
30°
40°
50°
60°
70°
80°
90°
-100°
-110°
-120°
-130°
-140°
-150°-160°
-170°
-10°-20°
-30°
-40°
-50°
-60°
-70°
-80°
-90°
0º 45º 90º 135º 180º 0º 656. 656. 656. 656. 656. 5º 740. 716. 660. 621. 592. 63.815º 902. 806. 647. 516. 463. 188.325º 1070. 913. 602. 389. 320. 299.935º 1148. 947. 503. 256. 194. 371.945º 1068. 870. 369. 131. 99. 385.955º 923. 722. 244. 68. 54. 342.065º 670. 481. 131. 32. 17. 245.975º 454. 259. 81. 5. 6. 146.585º 300. 155. 23. 6. 8. 97.790º 276. 148. 0. 8. 11.95º 298. 165. 8. 3. 8. 98.7105º 454. 273. 71. 6. 6. 150.5115º 665. 496. 126. 29. 17. 248.7125º 904. 728. 244. 64. 49. 342.3135º 1028. 873. 369. 171. 110. 387.6145º 1152. 955. 512. 244. 180. 372.1155º 1094. 930. 607. 370. 297. 300.7165º 941. 830. 649. 495. 436. 187.9175º 758. 713. 662. 599. 565. 62.8180º 654. 654. 654. 654. 654.
LUMEN SUMMARY ZONAL CAVITY COEFFICIENTS
Zone Lumens % Lamp % Fixture0 - 30 552. 9.4 12.90 - 40 924. 15.7 21.50 - 60 1652. 28.0 38.50 - 90 2142. 36.3 49.9
90 - 120 498. 8.4 11.690 - 130 840. 14.2 19.690 - 150 1600. 27.1 37.390 - 180 2151. 36.5 50.1
Total Luminaire:0 - 180 4293. 72.8 100.0
Total Luminaire Optical Efficiency: 72.8%
Ceiling .80 .70 .50Wall .70 .50 .30 .70 .50 .30 .50 .30 .10
Room
Cav
ity
Ratio
0 .78 .78 .78 .72 .72 .72 .61 .61 .611 .71 .68 .65 .65 .63 .60 .53 .51 .492 .65 .59 .55 .59 .55 .51 .46 .43 .413 .59 .52 .47 .54 .48 .44 .41 .38 .354 .54 .46 .40 .50 .43 .38 .36 .33 .295 .49 .41 .35 .45 .38 .33 .32 .28 .256 .45 .37 .31 .42 .34 .29 .29 .25 .227 .42 .33 .27 .38 .31 .25 .26 .22 .198 .39 .30 .24 .35 .27 .22 .23 .19 .169 .36 .27 .21 .33 .25 .20 .21 .17 .1410 .33 .24 .19 .31 .23 .18 .19 .15 .13
Effective Floor Cavity Reflectance = .20 FOOTCANDLE ESTIMATOR OCCUPANCY SENSOR DETAIL
42
48
48
42
50
57
57
50
38
43
43
38
25
27
27
25
16
17
17
16
12
12
12
12
Footcandle calculations based on standard reflectance of 80/50/20 and a light loss factor of .85.Fixtures installed at 8’ mounting height in 12’ x 12’ room with 10’ ceiling. Values shown are at 36” work surface height.
Sensor: FS-505Watt Stopper
BACKVIEW
A B C2’ Unit 25-1/8” O.C. 20-1/2” O.C. 16” O.C.3’ Unit 37-1/8” O.C. 32-1/2” O.C. 32” O.C.4’ Unit 49-1/8” O.C. 42-1/2” O.C. 32” O.C.
WMA ARCHITECTURAL WALL MOUNT
TEST REPORT INFORMATIONXX Test Report #: 14044.0XX Date: 04/23/08XX Lamp Type: F32T8/835XX Lamp Quantity: 2
T8
(2) 7/8” KOs
(4) Keyholes
A
B
C
2” KOs(3’ and 4’ fixtures only)
Specifications and dimensions subject to change without notice.Consult your representative for additional options and finishes.
FAIL-SAFE®
SPECIFICATION FEATURES
Mounting
Recessed grid or flange, ceiling
mount. Standard 1" or 1 1/2" NEMA
Type "G" ceiling systems. Surface-
mount available.
Lamps
By others.
Housing
Die-formed, 20 ga. cold-rolled steel.
Seam-welded construction, absent
of holes. Optional brushed or
painted stainless steel and painted
white aluminum.
Door
Door is hinged to the housing with
two stainless steel aircraft cables.
Continuous piano hinge optional.
Fasteners
Captive stainless steel Philips head
screws secure door frame to the
housing.
Door Frame
Cold rolled steel, painted white, flat
inset door standard. Optional white
painted extruded aluminum,
anodized extruded aluminum, and
brushed stainless steel, flat inset.
Gasket
Closed-cell silicone gasket seals
door to housing.
Finish
High gloss, electrostatically
applied, white powder coat finish,
average minimum reflectance 92%.
500 hour salt spray test.
Lens
One-piece asymmetric/symmetric
acrylic lens. RFI 3/8" square
metalized grid, grounded to
housing. Clear, smooth acrylic lens
below primary lens for ease of
cleaning. Other lenses available,
refer to Ordering Information.
Bal last
Standard, Class P, CBM/ETL
electronic ballast.
Compliance
MIL-STD-461F available with
standard electronic ballasts and
dimming ballasts, when ordered
with MIL1, MIL2 or MIL3 Option
(ASY/SYM/RFI or 89BC lens
required). Results furnished upon
request. See Options for exact
catalog nomenclature.
Labels
UL/cUL listed, standard wet
location. IP65 rated.
ORM2x2
2x4
1x4
Fluorescent
Healthcare: Operating Room
RECESSED FLANGE
RECESSED GRID
SURFACE
Fail-Safe's development of the asymmetric/symmetric ORM represents
the latest technology in precise control of light to the surgical task and to
the surrounding area, and allows multi-level lighting without changing
the character of the lighting distribution. The ORM's high efficiency and
precise lighting distribution delivers high illumination to the surgical task
area. Quality and value are maintained to provide the best performance
solution for your design needs.
DESCRIPTION
ORM-G 1x4 CROSS-SECTION
[103mm]4 1/16"
11 11/16"[297mm]
ORM-G 2x2/2x4 CROSS-SECTION
23 11/16"[602mm]
4 1/16"[103mm]
4 11/16"[119mm]
12"[305mm]
ORM-S 1x4 CROSS-SECTIONORM-S 2x2/2x4 CROSS-SECTION
4 1/16"[119mm]
24"[610mm]
ORM-F 1x4 CROSS-SECTION
1x4 ceiling cut-out dimensions: 12” (W) x 48 5/16” (L)
ORM-F 2x2/2x4 CROSS-SECTION
2x2 ceiling cut-out dimensions: 24” (W) x 24 5/16” (L)2x4 ceiling cut-out dimensions: 24” (W) x 48 5/16” (L)
4 3/4”[120.29]
4 3/4”[120.29]
11 11/16”[296.86]
23 11/16”[601.66]
NOTE: “MIL” box required for MILSTD461F compliance, adds 2” to overall fixture height, all sizes and mounting configurations. See Options for “MIL” specification.
Wet Location
IP65 rated
Catalog # Type
Date
Project
Comments
Prepared by
ADC091967
2011-11-14 15:49:31
Specifications and dimensions subject to change without notice.Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ORM
617 =(6) 17W T8 Lamps
G=Grid (1” & 1-1/2” T-Bar) F=Flange (Swing-out brackets standard)
Lamp Type
Ce i l ing Type
ORM = Operating Room/ Surgical
ORM
ProductFami ly
120=120V277=277V347=347V
Vol tage
Electronic Ballast
EB82=(2) Ballasts, Instant Start, T8 lamps
Ballast
EBP =Emergency Battery Pack 4
GLR =Fuse and Holder 1/RIF=1 Radio Interference Filter 5, 10
Opt ions
SAMPLE NUMBER: ORM-G-24 -632 -UNV-ASY/SYM/RF I -EB83-ALXP-SHN-CPH
CPH=Continuous Piano Hinge 2
SW=Sealed Wireway
EB83=(3) Ballasts, Instant Start, T8 lamps
24 =24” Wide12 =12” Wide
Width
614 =(6) 14W T5 Lamps 624 =(6) 24W T5HO Lamps
417 =(4) 17W T8 Lamps 414 =(4) 14W T5 Lamps
440BX=(4) 40W Biaxial Lamps
UNV =120V-277V
S =SurfaceA125 =Pattern 12 acrylic,
0.125” thick
Lens
EB52=(2) Ballasts, T5 lamps EB53=(3) Ballasts, T5 lamps
Door/F in i sh Opt ions
Blank=Die-formed, cold rolled steel, white powder coat finish, flat inset door for recessed unit. Overlapping, steel, white powder coat for surface.ALP=Die-formed Aluminum, white powder coat finish, flat inset door SSP=Stainless Steel, white powder coat finish.SSN=Stainless Steel Brushed finish, flat inset doorALX=Extruded Alumium, Clear Anodized finish, flat inset doorALXP=Extruded Aluminum, white powder coat finish, flat inset door
SHN=Stainless Steel Housing, Brushed finishALH=Aluminum Housing, white powder coat finish
ASY/SYM=Asymmetric/Symmetric LensASY/SYM/RFI=Asymmetric/Symmetric Lens with RFI grid
Blank=20 ga. Cold Rolled Steel, white powder coat finishSHP=Stainless Steel Housing, white powder coat finish
EQ=Earthquake Clips
TAD =Top Access Door
TED =Top Entry Door (
Hous ingOpt ions
632=(6) 32W T8 Lamps 628=(6) 28W T5 Lamps 654=(6) 54W T5HO Lamps 432=(4) 32W T8 Lamps 428=(4) 28W T5 Lamps
454=(4) 54W T5HO Lamps
EB51=(1) Ballast, T5 lamps
EB81=(1) Ballast, Instant Start, T8 lamps
2x2 2x4
332=(3) 32W T8 Lamps 328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
232=(2) 32W T8 Lamps 228=(2) 28W T5 Lamps
254=(2) 54W T5HO Lamps
1x4
424=(4) 24W T5HO Lamps
450BX=(4) 50W Biaxial Lamps
317=(3) 17W T8 Lamps
314=(3) 14W T5 Lamps 324 =(3) 24W T5HO Lamps
332=(3) 32W T8 Lamps
328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
door accessible from room side)
(door accessible from plenum only)
Surface-mount door is overlapping, steel, with white powder coat finish. Not available with ALXP, ALX, SSP, SSN. Recessed door is flat inset standard.CPH available with ALXP or ALX options only.ALX door option not IP65 rated.Specify voltage.
NOTES:
For dimming ballast, specify quantity and catalog number.
EBX1=(1) Ballast, BX lamps EBX2=(2) Ballasts, BX lamps
1, 3
240 BX =(2) 40W Biaxial Lamps250 BX =(2) 50W Biaxial Lamps
255BX =(2) 55W Biaxial Lamps340 BX =(3) 40W Biaxial Lamps
350 BX =(3) 50W Biaxial Lamps355BX =(3) 55W Biaxial Lamps
455BX=(4) 55W Biaxial Lamps
GEN1 =Interim lighting for generator back-up systems; 1-lamp operation
GEN3 =Interim lighting for generator back-up systems; 2- or 3-lamp operation
AM = Anti-microbial finish (all painted parts)
87 120V only. (277V applications, consult factory.)
36” opening for MIL spec.
MIL1 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, single circuit.
1, 6
ER82=(2) Ballasts, Rapid Start, T8 lamps ER83=(3) Ballasts, Rapid Start, T8 lamps
ER81=(1) Ballast, Rapid Start, T8 lamps
7, 9, 12
MIL2 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 2 circuits.
MIL3 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 3 circuits.
9 Wiring box placed on fixture housing, adding 2” to fixture height.10 RIF does not ensure MILSTD461F rating. MIL1, MIL2, MIL3 ensures
MILSTD461F rating.
KSH25= Bat Wing Distribution89BC= 0.125” thick KSH19 RFI - symmetrical
MIL spec not available for surface mount.7, 9, 12
7, 9, 12
1
1
1
2345
6For (1) RIF, specify as 1/RIF, for (2) RIFs, specify as 2/RIF, (3) RIFs, specify as 3/RIF.
8
11
11 Multiple ballasts (standard and EM) may require ballast(s) to be mounted in a back-box on the fixture housing, which will increase fixture height. Consultfactory for details.
4
8
12 For MILSTD461F compliance, the ASY/SYM/RFI or 89BC lens is required, alongwith either MIL1, MIL2 or MIL3 option. Radio Interference Filters (RIF) are not required.
2/RIF=2 Radio Interference Filters 5, 10
3/RIF=3 Radio Interference Filters 5, 10
ORDERING INFORMATION
Please contact customer service representative or visit our website @ www.cooperlighting.com.
PHOTOMETRICS
ADC091967
2011-11-14 15:49:31
Specifications and dimensions subject to change without notice.Consult your representative for additional options and finishes.
FAIL-SAFE®
SPECIFICATION FEATURES
Mounting
Recessed grid or flange, ceiling
mount. Standard 1" or 1 1/2" NEMA
Type "G" ceiling systems. Surface-
mount available.
Lamps
By others.
Housing
Die-formed, 20 ga. cold-rolled steel.
Seam-welded construction, absent
of holes. Optional brushed or
painted stainless steel and painted
white aluminum.
Door
Door is hinged to the housing with
two stainless steel aircraft cables.
Continuous piano hinge optional.
Fasteners
Captive stainless steel Philips head
screws secure door frame to the
housing.
Door Frame
Cold rolled steel, painted white, flat
inset door standard. Optional white
painted extruded aluminum,
anodized extruded aluminum, and
brushed stainless steel, flat inset.
Gasket
Closed-cell silicone gasket seals
door to housing.
Finish
High gloss, electrostatically
applied, white powder coat finish,
average minimum reflectance 92%.
500 hour salt spray test.
Lens
One-piece asymmetric/symmetric
acrylic lens. RFI 3/8" square
metalized grid, grounded to
housing. Clear, smooth acrylic lens
below primary lens for ease of
cleaning. Other lenses available,
refer to Ordering Information.
Bal last
Standard, Class P, CBM/ETL
electronic ballast.
Compliance
MIL-STD-461F available with
standard electronic ballasts and
dimming ballasts, when ordered
with MIL1, MIL2 or MIL3 Option
(ASY/SYM/RFI or 89BC lens
required). Results furnished upon
request. See Options for exact
catalog nomenclature.
Labels
UL/cUL listed, standard wet
location. IP65 rated.
ORM2x2
2x4
1x4
Fluorescent
Healthcare: Operating Room
RECESSED FLANGE
RECESSED GRID
SURFACE
Fail-Safe's development of the asymmetric/symmetric ORM represents
the latest technology in precise control of light to the surgical task and to
the surrounding area, and allows multi-level lighting without changing
the character of the lighting distribution. The ORM's high efficiency and
precise lighting distribution delivers high illumination to the surgical task
area. Quality and value are maintained to provide the best performance
solution for your design needs.
DESCRIPTION
ORM-G 1x4 CROSS-SECTION
[103mm]4 1/16"
11 11/16"[297mm]
ORM-G 2x2/2x4 CROSS-SECTION
23 11/16"[602mm]
4 1/16"[103mm]
4 11/16"[119mm]
12"[305mm]
ORM-S 1x4 CROSS-SECTIONORM-S 2x2/2x4 CROSS-SECTION
4 1/16"[119mm]
24"[610mm]
ORM-F 1x4 CROSS-SECTION
1x4 ceiling cut-out dimensions: 12” (W) x 48 5/16” (L)
ORM-F 2x2/2x4 CROSS-SECTION
2x2 ceiling cut-out dimensions: 24” (W) x 24 5/16” (L)2x4 ceiling cut-out dimensions: 24” (W) x 48 5/16” (L)
4 3/4”[120.29]
4 3/4”[120.29]
11 11/16”[296.86]
23 11/16”[601.66]
NOTE: “MIL” box required for MILSTD461F compliance, adds 2” to overall fixture height, all sizes and mounting configurations. See Options for “MIL” specification.
Wet Location
IP65 rated
Catalog # Type
Date
Project
Comments
Prepared by
ADC091967
2011-11-14 15:49:31
Specifications and dimensions subject to change without notice.Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ORM
617 =(6) 17W T8 Lamps
G=Grid (1” & 1-1/2” T-Bar) F=Flange (Swing-out brackets standard)
Lamp Type
Ce i l ing Type
ORM = Operating Room/ Surgical
ORM
ProductFami ly
120=120V277=277V347=347V
Vol tage
Electronic Ballast
EB82=(2) Ballasts, Instant Start, T8 lamps
Ballast
EBP =Emergency Battery Pack 4
GLR =Fuse and Holder 1/RIF=1 Radio Interference Filter 5, 10
Opt ions
SAMPLE NUMBER: ORM-G-24 -632 -UNV-ASY/SYM/RF I -EB83-ALXP-SHN-CPH
CPH=Continuous Piano Hinge 2
SW=Sealed Wireway
EB83=(3) Ballasts, Instant Start, T8 lamps
24 =24” Wide12 =12” Wide
Width
614 =(6) 14W T5 Lamps 624 =(6) 24W T5HO Lamps
417 =(4) 17W T8 Lamps 414 =(4) 14W T5 Lamps
440BX=(4) 40W Biaxial Lamps
UNV =120V-277V
S =SurfaceA125 =Pattern 12 acrylic,
0.125” thick
Lens
EB52=(2) Ballasts, T5 lamps EB53=(3) Ballasts, T5 lamps
Door/F in i sh Opt ions
Blank=Die-formed, cold rolled steel, white powder coat finish, flat inset door for recessed unit. Overlapping, steel, white powder coat for surface.ALP=Die-formed Aluminum, white powder coat finish, flat inset door SSP=Stainless Steel, white powder coat finish.SSN=Stainless Steel Brushed finish, flat inset doorALX=Extruded Alumium, Clear Anodized finish, flat inset doorALXP=Extruded Aluminum, white powder coat finish, flat inset door
SHN=Stainless Steel Housing, Brushed finishALH=Aluminum Housing, white powder coat finish
ASY/SYM=Asymmetric/Symmetric LensASY/SYM/RFI=Asymmetric/Symmetric Lens with RFI grid
Blank=20 ga. Cold Rolled Steel, white powder coat finishSHP=Stainless Steel Housing, white powder coat finish
EQ=Earthquake Clips
TAD =Top Access Door
TED =Top Entry Door (
Hous ingOpt ions
632=(6) 32W T8 Lamps 628=(6) 28W T5 Lamps 654=(6) 54W T5HO Lamps 432=(4) 32W T8 Lamps 428=(4) 28W T5 Lamps
454=(4) 54W T5HO Lamps
EB51=(1) Ballast, T5 lamps
EB81=(1) Ballast, Instant Start, T8 lamps
2x2 2x4
332=(3) 32W T8 Lamps 328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
232=(2) 32W T8 Lamps 228=(2) 28W T5 Lamps
254=(2) 54W T5HO Lamps
1x4
424=(4) 24W T5HO Lamps
450BX=(4) 50W Biaxial Lamps
317=(3) 17W T8 Lamps
314=(3) 14W T5 Lamps 324 =(3) 24W T5HO Lamps
332=(3) 32W T8 Lamps
328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
door accessible from room side)
(door accessible from plenum only)
Surface-mount door is overlapping, steel, with white powder coat finish. Not available with ALXP, ALX, SSP, SSN. Recessed door is flat inset standard.CPH available with ALXP or ALX options only.ALX door option not IP65 rated.Specify voltage.
NOTES:
For dimming ballast, specify quantity and catalog number.
EBX1=(1) Ballast, BX lamps EBX2=(2) Ballasts, BX lamps
1, 3
240 BX =(2) 40W Biaxial Lamps250 BX =(2) 50W Biaxial Lamps
255BX =(2) 55W Biaxial Lamps340 BX =(3) 40W Biaxial Lamps
350 BX =(3) 50W Biaxial Lamps355BX =(3) 55W Biaxial Lamps
455BX=(4) 55W Biaxial Lamps
GEN1 =Interim lighting for generator back-up systems; 1-lamp operation
GEN3 =Interim lighting for generator back-up systems; 2- or 3-lamp operation
AM = Anti-microbial finish (all painted parts)
87 120V only. (277V applications, consult factory.)
36” opening for MIL spec.
MIL1 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, single circuit.
1, 6
ER82=(2) Ballasts, Rapid Start, T8 lamps ER83=(3) Ballasts, Rapid Start, T8 lamps
ER81=(1) Ballast, Rapid Start, T8 lamps
7, 9, 12
MIL2 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 2 circuits.
MIL3 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 3 circuits.
9 Wiring box placed on fixture housing, adding 2” to fixture height.10 RIF does not ensure MILSTD461F rating. MIL1, MIL2, MIL3 ensures
MILSTD461F rating.
KSH25= Bat Wing Distribution89BC= 0.125” thick KSH19 RFI - symmetrical
MIL spec not available for surface mount.7, 9, 12
7, 9, 12
1
1
1
2345
6For (1) RIF, specify as 1/RIF, for (2) RIFs, specify as 2/RIF, (3) RIFs, specify as 3/RIF.
8
11
11 Multiple ballasts (standard and EM) may require ballast(s) to be mounted in a back-box on the fixture housing, which will increase fixture height. Consultfactory for details.
4
8
12 For MILSTD461F compliance, the ASY/SYM/RFI or 89BC lens is required, alongwith either MIL1, MIL2 or MIL3 option. Radio Interference Filters (RIF) are not required.
2/RIF=2 Radio Interference Filters 5, 10
3/RIF=3 Radio Interference Filters 5, 10
ORDERING INFORMATION
Please contact customer service representative or visit our website @ www.cooperlighting.com.
PHOTOMETRICS
ADC091967
2011-11-14 15:49:31
Specifications and dimensions subject to change without notice.Consult your representative for additional options and finishes.
FAIL-SAFE®
SPECIFICATION FEATURES
Mounting
Recessed grid or flange, ceiling
mount. Standard 1" or 1 1/2" NEMA
Type "G" ceiling systems. Surface-
mount available.
Lamps
By others.
Housing
Die-formed, 20 ga. cold-rolled steel.
Seam-welded construction, absent
of holes. Optional brushed or
painted stainless steel and painted
white aluminum.
Door
Door is hinged to the housing with
two stainless steel aircraft cables.
Continuous piano hinge optional.
Fasteners
Captive stainless steel Philips head
screws secure door frame to the
housing.
Door Frame
Cold rolled steel, painted white, flat
inset door standard. Optional white
painted extruded aluminum,
anodized extruded aluminum, and
brushed stainless steel, flat inset.
Gasket
Closed-cell silicone gasket seals
door to housing.
Finish
High gloss, electrostatically
applied, white powder coat finish,
average minimum reflectance 92%.
500 hour salt spray test.
Lens
One-piece asymmetric/symmetric
acrylic lens. RFI 3/8" square
metalized grid, grounded to
housing. Clear, smooth acrylic lens
below primary lens for ease of
cleaning. Other lenses available,
refer to Ordering Information.
Bal last
Standard, Class P, CBM/ETL
electronic ballast.
Compliance
MIL-STD-461F available with
standard electronic ballasts and
dimming ballasts, when ordered
with MIL1, MIL2 or MIL3 Option
(ASY/SYM/RFI or 89BC lens
required). Results furnished upon
request. See Options for exact
catalog nomenclature.
Labels
UL/cUL listed, standard wet
location. IP65 rated.
ORM2x2
2x4
1x4
Fluorescent
Healthcare: Operating Room
RECESSED FLANGE
RECESSED GRID
SURFACE
Fail-Safe's development of the asymmetric/symmetric ORM represents
the latest technology in precise control of light to the surgical task and to
the surrounding area, and allows multi-level lighting without changing
the character of the lighting distribution. The ORM's high efficiency and
precise lighting distribution delivers high illumination to the surgical task
area. Quality and value are maintained to provide the best performance
solution for your design needs.
DESCRIPTION
ORM-G 1x4 CROSS-SECTION
[103mm]4 1/16"
11 11/16"[297mm]
ORM-G 2x2/2x4 CROSS-SECTION
23 11/16"[602mm]
4 1/16"[103mm]
4 11/16"[119mm]
12"[305mm]
ORM-S 1x4 CROSS-SECTIONORM-S 2x2/2x4 CROSS-SECTION
4 1/16"[119mm]
24"[610mm]
ORM-F 1x4 CROSS-SECTION
1x4 ceiling cut-out dimensions: 12” (W) x 48 5/16” (L)
ORM-F 2x2/2x4 CROSS-SECTION
2x2 ceiling cut-out dimensions: 24” (W) x 24 5/16” (L)2x4 ceiling cut-out dimensions: 24” (W) x 48 5/16” (L)
4 3/4”[120.29]
4 3/4”[120.29]
11 11/16”[296.86]
23 11/16”[601.66]
NOTE: “MIL” box required for MILSTD461F compliance, adds 2” to overall fixture height, all sizes and mounting configurations. See Options for “MIL” specification.
Wet Location
IP65 rated
Catalog # Type
Date
Project
Comments
Prepared by
ADC091967
2011-11-14 15:49:31
Specifications and dimensions subject to change without notice.Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ORM
617 =(6) 17W T8 Lamps
G=Grid (1” & 1-1/2” T-Bar) F=Flange (Swing-out brackets standard)
Lamp Type
Ce i l ing Type
ORM = Operating Room/ Surgical
ORM
ProductFami ly
120=120V277=277V347=347V
Vol tage
Electronic Ballast
EB82=(2) Ballasts, Instant Start, T8 lamps
Ballast
EBP =Emergency Battery Pack 4
GLR =Fuse and Holder 1/RIF=1 Radio Interference Filter 5, 10
Opt ions
SAMPLE NUMBER: ORM-G-24 -632 -UNV-ASY/SYM/RF I -EB83-ALXP-SHN-CPH
CPH=Continuous Piano Hinge 2
SW=Sealed Wireway
EB83=(3) Ballasts, Instant Start, T8 lamps
24 =24” Wide12 =12” Wide
Width
614 =(6) 14W T5 Lamps 624 =(6) 24W T5HO Lamps
417 =(4) 17W T8 Lamps 414 =(4) 14W T5 Lamps
440BX=(4) 40W Biaxial Lamps
UNV =120V-277V
S =SurfaceA125 =Pattern 12 acrylic,
0.125” thick
Lens
EB52=(2) Ballasts, T5 lamps EB53=(3) Ballasts, T5 lamps
Door/F in i sh Opt ions
Blank=Die-formed, cold rolled steel, white powder coat finish, flat inset door for recessed unit. Overlapping, steel, white powder coat for surface.ALP=Die-formed Aluminum, white powder coat finish, flat inset door SSP=Stainless Steel, white powder coat finish.SSN=Stainless Steel Brushed finish, flat inset doorALX=Extruded Alumium, Clear Anodized finish, flat inset doorALXP=Extruded Aluminum, white powder coat finish, flat inset door
SHN=Stainless Steel Housing, Brushed finishALH=Aluminum Housing, white powder coat finish
ASY/SYM=Asymmetric/Symmetric LensASY/SYM/RFI=Asymmetric/Symmetric Lens with RFI grid
Blank=20 ga. Cold Rolled Steel, white powder coat finishSHP=Stainless Steel Housing, white powder coat finish
EQ=Earthquake Clips
TAD =Top Access Door
TED =Top Entry Door (
Hous ingOpt ions
632=(6) 32W T8 Lamps 628=(6) 28W T5 Lamps 654=(6) 54W T5HO Lamps 432=(4) 32W T8 Lamps 428=(4) 28W T5 Lamps
454=(4) 54W T5HO Lamps
EB51=(1) Ballast, T5 lamps
EB81=(1) Ballast, Instant Start, T8 lamps
2x2 2x4
332=(3) 32W T8 Lamps 328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
232=(2) 32W T8 Lamps 228=(2) 28W T5 Lamps
254=(2) 54W T5HO Lamps
1x4
424=(4) 24W T5HO Lamps
450BX=(4) 50W Biaxial Lamps
317=(3) 17W T8 Lamps
314=(3) 14W T5 Lamps 324 =(3) 24W T5HO Lamps
332=(3) 32W T8 Lamps
328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
door accessible from room side)
(door accessible from plenum only)
Surface-mount door is overlapping, steel, with white powder coat finish. Not available with ALXP, ALX, SSP, SSN. Recessed door is flat inset standard.CPH available with ALXP or ALX options only.ALX door option not IP65 rated.Specify voltage.
NOTES:
For dimming ballast, specify quantity and catalog number.
EBX1=(1) Ballast, BX lamps EBX2=(2) Ballasts, BX lamps
1, 3
240 BX =(2) 40W Biaxial Lamps250 BX =(2) 50W Biaxial Lamps
255BX =(2) 55W Biaxial Lamps340 BX =(3) 40W Biaxial Lamps
350 BX =(3) 50W Biaxial Lamps355BX =(3) 55W Biaxial Lamps
455BX=(4) 55W Biaxial Lamps
GEN1 =Interim lighting for generator back-up systems; 1-lamp operation
GEN3 =Interim lighting for generator back-up systems; 2- or 3-lamp operation
AM = Anti-microbial finish (all painted parts)
87 120V only. (277V applications, consult factory.)
36” opening for MIL spec.
MIL1 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, single circuit.
1, 6
ER82=(2) Ballasts, Rapid Start, T8 lamps ER83=(3) Ballasts, Rapid Start, T8 lamps
ER81=(1) Ballast, Rapid Start, T8 lamps
7, 9, 12
MIL2 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 2 circuits.
MIL3 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 3 circuits.
9 Wiring box placed on fixture housing, adding 2” to fixture height.10 RIF does not ensure MILSTD461F rating. MIL1, MIL2, MIL3 ensures
MILSTD461F rating.
KSH25= Bat Wing Distribution89BC= 0.125” thick KSH19 RFI - symmetrical
MIL spec not available for surface mount.7, 9, 12
7, 9, 12
1
1
1
2345
6For (1) RIF, specify as 1/RIF, for (2) RIFs, specify as 2/RIF, (3) RIFs, specify as 3/RIF.
8
11
11 Multiple ballasts (standard and EM) may require ballast(s) to be mounted in a back-box on the fixture housing, which will increase fixture height. Consultfactory for details.
4
8
12 For MILSTD461F compliance, the ASY/SYM/RFI or 89BC lens is required, alongwith either MIL1, MIL2 or MIL3 option. Radio Interference Filters (RIF) are not required.
2/RIF=2 Radio Interference Filters 5, 10
3/RIF=3 Radio Interference Filters 5, 10
ORDERING INFORMATION
Please contact customer service representative or visit our website @ www.cooperlighting.com.
PHOTOMETRICS
ADC091967
2011-11-14 15:49:31
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
10/27/2008 3:30:43 PMConsult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice. ADP040640
DESCRIPTION
Low brightness 6" aperture reflector for use with 26W or 32W Triple Twin Tube 4-pin lamps. The precisely formed non-imaging reflector ensures 45° cutoff to lamp and lamp image and the one piece design eliminates light leaks at the ceiling. Standard features include low iridescent finish on all reflector colors to eliminate "rainbowing". One electronic ballast operates 26W and 32W triple lamps. Venting ensures maximum lamp life and lumen output. Adjustable socket locks lamp into optimal position and cannot be disturbed by normal maintenance. Medium beam, wide beam, lens, and open wall wash reflectors are interchangeable within the same housing.
A ... Reflector.050 thick aluminum, in a one piece spun macrofocal parabolic contour. Available in a variety of Alzak® finishes. Also available with White or Black Baffle. Positive reflector mounting pulls trim tight to ceiling.
B ... Trim Ring OptionsSelf flanged or molded white trim ring. Rimless trim ring accessories available.
C ... Socket CapOne piece vented and finned die cast aluminum cap for maximum thermal performance.
D ... Housing Mounting FrameOne piece precision die cast aluminum 1-1/2" deep collar accommodates varying dimensions of ceiling materials.
E ... Universal Mounting BracketAccepts 1/2" EMT, C Channel, T bar fasteners, and bar hangers. Adjusts 5" vertically from above or below ceiling.
F ... Conduit FittingsDie cast screw tight connectors.
G ... Junction BoxListed for eight #12AWG (four in, four out) 90°C conductors feed through branch wiring.
1/2" and two 3/4" pry outs. Positioned to allow straight conduit runs. Access to junction box by removing reflector.
H ... Socket4 pin GX24q3 base with fatigue free stainless steel lamp spring ensures positive lamp retention.
I ... Electronic BallastElectronic ballast provides full light output and rated lamp life. Provides flicker free and noise free operation and starting. End of lamp life protection is standard.
LabelscULus listed, standard damp label.
C6042 6001/00
26W, 32W TTT
Compact Fluorescent
6" MEDIUM BEAM
OPEN DOWNLIGHT
ORDERING INFORMATION
Sample Number: Complete unit consists of housing, ballast and trim.
Finish
LI Low Iridescent Clear=
H Haze=
WMH Warm Haze=
G Gold=
WH Wheat=
W Gloss White=
GP Graphite=
GPH Graphite Haze=
K Cognac=
KH Cognac Haze=
BB Black Baffle (6000 only)=
WB White Baffle (6000 only)
=
Trims
6001 Self Flanged=
6000 Molded Trim Ring, White
=
6001E Self Flanged, use with IEM
=
6000E Molded Trim Ring, White, use with IEM
=
Accessories
HB26 C Channel Bar Hangers, 26" Long, Pair=
HB50 C Channel Bar Hangers, 50" Long, Pair=
TRM6 Metal Trim Ring, Specify Finish=
TRR6 Rimless Trim Ring, White=
FK5 5 Amp Field Installable Fuse Kit 300V Max=
DT6 Deco Trims=
RMB-22 Wood Joist Bar Hanger, 22" Long, Pair=
HSA6 Slope Adapter for 6" Aperture Housings, Specify Slope
=
Option
WF White Painted Flanged (Self Flanged only)
=
Housing
C60 6'' CF Vertical
=
Ballast
E 120/277V 50/60 Hz Electronic=
3E 347V 50/60 Hz Electronic=
1D26 26W 120V Dimming, Lutron Compact SE
=
2D26 26W 277V Dimming, Lutron Compact SE
=
1D32 32W 120V Dimming, Lutron Compact SE
=
2D32 32W 277V Dimming, Lutron Compact SE
=
EDR26 DeRated Wattage Label, 26W
=
EDR32 DeRated Wattage Label, 32W
=
Options
CP Chicago Plenum
=
EM Emergency Module with remote test switch
=
IEM Emergency Module with integral test switch
=
Wattage
42 (1) 26W or 32W TTT Lamp
=
A
D
B
C
H
E
F
G
I
(w i th I EM Opt ion )
Top V iew
16-13/16"[427mm]
13"[330mm]
9 -1/2"[260mm]
CP10"
[273mm]
5-11/16" [144mm]6-3/8" [162mm]
7" [178mm]
11-3/16"[285mm]
12" [305mm]
E n e rg y D at a2 6W T r i p le 4 -p i nBallast: Electronic120V Input Watts: 29, Line Amps: 0.25277V Input Watts: 29, Line Amps: 0.10Power Factor: >.99, THD: <10%:Min Starting Temp.: -10°C (15°F)Sound Rating: A3 2W T r i p le 4 -p i nBallast: Electronic120V Input Watts: 36, Line Amps: 0.32277V Input Watts: 36, Line Amps: 0.16Power Factor: >99, THD: <10%:Min Starting Temp.: -10°C (15°F)Sound Rating: A3 2W T r i p le 4 -p i nBallast: Dimming120V Input Watts: 38, Line Amps: 0.31277V Input Watts: 37, Line Amps: 0.13Power Factor: >95, THD: <20%:Min Starting Temp.: 10°C (50°F)Sound Rating: A
Accessories should be ordered separately.For additional options, please consult factory. Alzak is a registered trademark of AluminumCompany of America. Hi-Lume is a registered trademark of Lutron Electronics Co., Inc.
NOTES:
PORTFOLIO
Portfolio • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 10/27/2008 3:30:43 PMSpecifications and Dimensions subject to change without notice. ADP040640
PHOTOMETRICS
.
C6042 6001/6000
Beam diameter is to 50% of maximum footcandles, roundedto the nearest half-foot.
Footcandle values are initial, apply appropriate light lossfactors where necessary.
4.5'5.5'6.5'8.0'10.0'12.0'
4.0'5.0'6.0'7.0'9.0'
11.0'
58392818128
Cone o f L ightDistance toIlluminated Plane
Initial NadirFootcandles
Beam Diameter
Cand lepower D i s t r ibut ion
Zona l Lumen SummaryZone Lumens %Lamp %Luminaire0-30 736 30.7 64.70-40 1037 43.2 91.20-60 1134 47.3 99.70-90 1138 47.4 100.090-180 0 0.0 0.00-180 1138 47.4 100.0
80% 70% 50% 30% 10% 0%70 50 30 10 50 30 10 50 10 50 10 50 10 0
56 56 56 56 55 55 55 53 53 50 50 48 48 4754 52 51 50 51 50 49 49 48 48 46 46 45 4451 49 47 45 48 46 45 46 44 45 43 44 42 4148 45 43 41 45 42 41 43 40 42 39 41 39 3846 42 39 37 42 39 37 41 37 40 36 39 36 3543 39 36 34 39 36 34 38 34 37 34 36 33 3341 37 34 32 36 34 32 36 31 35 31 34 31 3039 34 31 29 34 31 29 33 29 33 29 32 29 2837 32 29 27 32 29 27 31 27 31 27 31 27 2635 30 27 26 30 27 25 30 25 29 25 29 25 2533 29 26 24 28 26 24 28 24 28 24 27 24 23rc=Ceiling reflectance, rw=Wall reflectance, RCR=Room cavity ratio CU Data Based on 20% Effective Floor Cavity Reflectance.
400
800
1200
Test No. H22287C6042 6000LI
Lamp=32 TTTLumens=2400SpacingCriterion=0.9Efficiency=47.4%
rcrw
RCR0123456789
10
Coe f f i c i en t o f U t i l i z a t ion
Cand lepowerDeg. CD
0 11655 1177
15 101325 74435 48145 7355 565 275 185 090 0
AverageLuminanceDeg. CD/SQ M
45 640355 54165 29475 24085 0
Note: A 32w lamp operates in emergencymode at 650 lumens. A 26w lamp operatesin emergency mode at 625 lumens.
Beam diameter is to 50% of maximum footcandles, roundedto the nearest half-foot.
Footcandle values are initial, apply appropriate light lossfactors where necessary.
4.5'5.5'6.5'8.0'10.0'12.0'
5.0'6.0'7.5'9.0'
11.5'13.5'
3624171175
Cone o f L ightDistance toIlluminated Plane
Initial NadirFootcandles
Beam Diameter
Cand le p o w er D i s t r ibut ion
Zona l Lumen SummaryZone Lumens %Lamp %Luminaire0-30 580 24.2 62.20-40 848 35.3 91.00-60 929 38.7 99.70-90 932 38.8 100.090-180 0 0.0 0.00-180 932 38.8 100.0
80% 70% 50% 30% 10% 0%70 50 30 10 50 30 10 50 10 50 10 50 10 0
46 46 46 46 45 45 45 43 43 41 41 40 40 3944 43 42 41 42 41 40 40 39 39 38 38 37 3642 40 38 37 39 38 36 38 35 37 35 36 34 3339 37 35 33 36 34 33 35 32 34 32 33 31 3137 34 32 30 34 32 30 33 30 32 29 31 29 2835 32 29 28 31 29 28 31 27 30 27 29 27 2633 30 27 25 29 27 25 29 25 28 25 28 25 2431 28 25 24 27 25 23 27 23 26 23 26 23 2230 26 23 22 26 23 22 25 22 25 22 24 21 2128 24 22 20 24 22 20 24 20 23 20 23 20 1927 23 20 19 23 20 19 22 19 22 19 22 19 18rc=Ceiling reflectance, rw=Wall reflectance, RCR=Room cavity ratio CU Data Based on 20% Effective Floor Cavity Reflectance.
300
600
900
Test No. H22288C6042 6000LI
Lamp=32W PLTLumens=2400SpacingCriterion=1.1Efficiency=38.8%
rcrw
RCR0123456789
10
Coe f f i c i en t o f U t i l i z a t ion
Cand lepowerDeg. CD
0 7285 750
15 77825 62835 43345 6455 565 275 185 090 0
AverageLuminanceDeg. CD/SQ M
45 562255 50865 27975 16885 0
Note: A 26w lamp operates in emergencymode at 625 lumens.
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
10/27/2008 3:30:43 PMConsult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice. ADP040640
DESCRIPTION
Low brightness 6" aperture reflector for use with 26W or 32W Triple Twin Tube 4-pin lamps. The precisely formed non-imaging reflector ensures 45° cutoff to lamp and lamp image and the one piece design eliminates light leaks at the ceiling. Standard features include low iridescent finish on all reflector colors to eliminate "rainbowing". One electronic ballast operates 26W and 32W triple lamps. Venting ensures maximum lamp life and lumen output. Adjustable socket locks lamp into optimal position and cannot be disturbed by normal maintenance. Medium beam, wide beam, lens, and open wall wash reflectors are interchangeable within the same housing.
A ... Reflector.050 thick aluminum, in a one piece spun macrofocal parabolic contour. Available in a variety of Alzak® finishes. Also available with White or Black Baffle. Positive reflector mounting pulls trim tight to ceiling.
B ... Trim Ring OptionsSelf flanged or molded white trim ring. Rimless trim ring accessories available.
C ... Socket CapOne piece vented and finned die cast aluminum cap for maximum thermal performance.
D ... Housing Mounting FrameOne piece precision die cast aluminum 1-1/2" deep collar accommodates varying dimensions of ceiling materials.
E ... Universal Mounting BracketAccepts 1/2" EMT, C Channel, T bar fasteners, and bar hangers. Adjusts 5" vertically from above or below ceiling.
F ... Conduit FittingsDie cast screw tight connectors.
G ... Junction BoxListed for eight #12AWG (four in, four out) 90°C conductors feed through branch wiring.
1/2" and two 3/4" pry outs. Positioned to allow straight conduit runs. Access to junction box by removing reflector.
H ... Socket4 pin GX24q3 base with fatigue free stainless steel lamp spring ensures positive lamp retention.
I ... Electronic BallastElectronic ballast provides full light output and rated lamp life. Provides flicker free and noise free operation and starting. End of lamp life protection is standard.
LabelscULus listed, standard damp label.
C6042 6001/00
26W, 32W TTT
Compact Fluorescent
6" MEDIUM BEAM
OPEN DOWNLIGHT
ORDERING INFORMATION
Sample Number: Complete unit consists of housing, ballast and trim.
Finish
LI Low Iridescent Clear=
H Haze=
WMH Warm Haze=
G Gold=
WH Wheat=
W Gloss White=
GP Graphite=
GPH Graphite Haze=
K Cognac=
KH Cognac Haze=
BB Black Baffle (6000 only)=
WB White Baffle (6000 only)
=
Trims
6001 Self Flanged=
6000 Molded Trim Ring, White
=
6001E Self Flanged, use with IEM
=
6000E Molded Trim Ring, White, use with IEM
=
Accessories
HB26 C Channel Bar Hangers, 26" Long, Pair=
HB50 C Channel Bar Hangers, 50" Long, Pair=
TRM6 Metal Trim Ring, Specify Finish=
TRR6 Rimless Trim Ring, White=
FK5 5 Amp Field Installable Fuse Kit 300V Max=
DT6 Deco Trims=
RMB-22 Wood Joist Bar Hanger, 22" Long, Pair=
HSA6 Slope Adapter for 6" Aperture Housings, Specify Slope
=
Option
WF White Painted Flanged (Self Flanged only)
=
Housing
C60 6'' CF Vertical
=
Ballast
E 120/277V 50/60 Hz Electronic=
3E 347V 50/60 Hz Electronic=
1D26 26W 120V Dimming, Lutron Compact SE
=
2D26 26W 277V Dimming, Lutron Compact SE
=
1D32 32W 120V Dimming, Lutron Compact SE
=
2D32 32W 277V Dimming, Lutron Compact SE
=
EDR26 DeRated Wattage Label, 26W
=
EDR32 DeRated Wattage Label, 32W
=
Options
CP Chicago Plenum
=
EM Emergency Module with remote test switch
=
IEM Emergency Module with integral test switch
=
Wattage
42 (1) 26W or 32W TTT Lamp
=
A
D
B
C
H
E
F
G
I
(w i th I EM Opt ion )
Top V iew
16-13/16"[427mm]
13"[330mm]
9 -1/2"[260mm]
CP10"
[273mm]
5-11/16" [144mm]6-3/8" [162mm]
7" [178mm]
11-3/16"[285mm]
12" [305mm]
E n e rg y D at a2 6W T r i p le 4 -p i nBallast: Electronic120V Input Watts: 29, Line Amps: 0.25277V Input Watts: 29, Line Amps: 0.10Power Factor: >.99, THD: <10%:Min Starting Temp.: -10°C (15°F)Sound Rating: A3 2W T r i p le 4 -p i nBallast: Electronic120V Input Watts: 36, Line Amps: 0.32277V Input Watts: 36, Line Amps: 0.16Power Factor: >99, THD: <10%:Min Starting Temp.: -10°C (15°F)Sound Rating: A3 2W T r i p le 4 -p i nBallast: Dimming120V Input Watts: 38, Line Amps: 0.31277V Input Watts: 37, Line Amps: 0.13Power Factor: >95, THD: <20%:Min Starting Temp.: 10°C (50°F)Sound Rating: A
Accessories should be ordered separately.For additional options, please consult factory. Alzak is a registered trademark of AluminumCompany of America. Hi-Lume is a registered trademark of Lutron Electronics Co., Inc.
NOTES:
PORTFOLIO
Portfolio • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 10/27/2008 3:30:43 PMSpecifications and Dimensions subject to change without notice. ADP040640
PHOTOMETRICS
.
C6042 6001/6000
Beam diameter is to 50% of maximum footcandles, roundedto the nearest half-foot.
Footcandle values are initial, apply appropriate light lossfactors where necessary.
4.5'5.5'6.5'8.0'10.0'12.0'
4.0'5.0'6.0'7.0'9.0'
11.0'
58392818128
Cone o f L ightDistance toIlluminated Plane
Initial NadirFootcandles
Beam Diameter
Cand lepower D i s t r ibut ion
Zona l Lumen SummaryZone Lumens %Lamp %Luminaire0-30 736 30.7 64.70-40 1037 43.2 91.20-60 1134 47.3 99.70-90 1138 47.4 100.090-180 0 0.0 0.00-180 1138 47.4 100.0
80% 70% 50% 30% 10% 0%70 50 30 10 50 30 10 50 10 50 10 50 10 0
56 56 56 56 55 55 55 53 53 50 50 48 48 4754 52 51 50 51 50 49 49 48 48 46 46 45 4451 49 47 45 48 46 45 46 44 45 43 44 42 4148 45 43 41 45 42 41 43 40 42 39 41 39 3846 42 39 37 42 39 37 41 37 40 36 39 36 3543 39 36 34 39 36 34 38 34 37 34 36 33 3341 37 34 32 36 34 32 36 31 35 31 34 31 3039 34 31 29 34 31 29 33 29 33 29 32 29 2837 32 29 27 32 29 27 31 27 31 27 31 27 2635 30 27 26 30 27 25 30 25 29 25 29 25 2533 29 26 24 28 26 24 28 24 28 24 27 24 23rc=Ceiling reflectance, rw=Wall reflectance, RCR=Room cavity ratio CU Data Based on 20% Effective Floor Cavity Reflectance.
400
800
1200
Test No. H22287C6042 6000LI
Lamp=32 TTTLumens=2400SpacingCriterion=0.9Efficiency=47.4%
rcrw
RCR0123456789
10
Coe f f i c i en t o f U t i l i z a t ion
Cand lepowerDeg. CD
0 11655 1177
15 101325 74435 48145 7355 565 275 185 090 0
AverageLuminanceDeg. CD/SQ M
45 640355 54165 29475 24085 0
Note: A 32w lamp operates in emergencymode at 650 lumens. A 26w lamp operatesin emergency mode at 625 lumens.
Beam diameter is to 50% of maximum footcandles, roundedto the nearest half-foot.
Footcandle values are initial, apply appropriate light lossfactors where necessary.
4.5'5.5'6.5'8.0'10.0'12.0'
5.0'6.0'7.5'9.0'
11.5'13.5'
3624171175
Cone o f L ightDistance toIlluminated Plane
Initial NadirFootcandles
Beam Diameter
Cand le p o w er D i s t r ibut ion
Zona l Lumen SummaryZone Lumens %Lamp %Luminaire0-30 580 24.2 62.20-40 848 35.3 91.00-60 929 38.7 99.70-90 932 38.8 100.090-180 0 0.0 0.00-180 932 38.8 100.0
80% 70% 50% 30% 10% 0%70 50 30 10 50 30 10 50 10 50 10 50 10 0
46 46 46 46 45 45 45 43 43 41 41 40 40 3944 43 42 41 42 41 40 40 39 39 38 38 37 3642 40 38 37 39 38 36 38 35 37 35 36 34 3339 37 35 33 36 34 33 35 32 34 32 33 31 3137 34 32 30 34 32 30 33 30 32 29 31 29 2835 32 29 28 31 29 28 31 27 30 27 29 27 2633 30 27 25 29 27 25 29 25 28 25 28 25 2431 28 25 24 27 25 23 27 23 26 23 26 23 2230 26 23 22 26 23 22 25 22 25 22 24 21 2128 24 22 20 24 22 20 24 20 23 20 23 20 1927 23 20 19 23 20 19 22 19 22 19 22 19 18rc=Ceiling reflectance, rw=Wall reflectance, RCR=Room cavity ratio CU Data Based on 20% Effective Floor Cavity Reflectance.
300
600
900
Test No. H22288C6042 6000LI
Lamp=32W PLTLumens=2400SpacingCriterion=1.1Efficiency=38.8%
rcrw
RCR0123456789
10
Coe f f i c i en t o f U t i l i z a t ion
Cand lepowerDeg. CD
0 7285 750
15 77825 62835 43345 6455 565 275 185 090 0
AverageLuminanceDeg. CD/SQ M
45 562255 50865 27975 16885 0
Note: A 26w lamp operates in emergencymode at 625 lumens.
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
10/27/2008 3:49:59 PMConsult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice. ADP040641
DESCRIPTION
Low brightness 6" aperture reflector for use with 26W and 32W Triple Twin Tube 4-pin lamps. The deeply regressed lens provides superb shielding in comparison to shallow lenses. Reflector trim eliminates brightness at higher angles. Choice of lens types for various aesthetics. Standard features include low iridescent finish on all reflector colors to eliminate "rainbowing". One electronic ballast operates all 26W and 32W triple lamps. Venting ensures maximum lamp life and lumen output. Adjustable socket locks lamp into optimal position and cannot be disturbed by normal maintenance. Medium beam, wide beam, lens and open wall wash reflectors are interchangeable within the same housing.
A ... Reflector.050 thick aluminum, in a one piece spun macrofocal parabolic contour. Available in a variety of Alzak® finishes. Positive reflector mounting pulls trim tight to ceiling. Available with White or Black Baffle.
B ... LensChoice of tempered fresnel, prismatic, diffuse, or clear glass lenses or molded prismatic acrylic, opal diffuser or clear UV stabilized acrylic. Lens is fixed to lower reflector.
C ... Trim Ring OptionsSelf flanged or molded white trim ring.
D ... Socket CapOne piece vented and finned die cast aluminum cap for maximum thermal performance.
E ... Housing Mounting FrameOne piece precision die cast aluminum 1 1/2" deep collar accommodates varying dimensions of ceiling materials.
F ... Universal Mounting BracketAccepts 1/2" EMT, C Channel, T bar fasteners, and bar hangers. Adjusts 5" vertically from above or below ceiling.
G ... Conduit FittingsDie cast screw tight connectors.
H ... Junction BoxListed for eight #12AWG (four in, four out) 90°C conductors feed through branch wiring. 1/2" and two 3/4" pry outs. Positioned to allow straight conduit runs. Access to junction box by removing reflector.
I ... Socket4 pin Gx24q3/4 base with fatigue free stainless steel lamp spring ensures positive lamp retention.
J ... Electronic BallastElectronic ballast provides full light output and rated lamp life. Provides flicker free and noise free operation and starting. End of lamp life protection is standard.
LabelscULus listed, standard wet label.
C6042 6081/80
26W, 32W TTT
Compact Fluorescent
6" LENSED DOWNLIGHT
ORDERING INFORMATION
Sample Number: Complete unit consists of housing, ballast and trim.
Lens
1 Prismatic Lens
=
2 Diffuse Lens=
3 Clear Lens=
1G Prismatic Glass
=
2G Diffuse Glass
=
3G Clear Glass
=
4G Fresnel Glass
=
Finish
LI Low Iridescent Clear=
H Haze=
WMH Warm Haze=
G Gold=
WH Wheat=
W Gloss White=
GP Graphite=
GPH Graphite Haze=
K Cognac=
KH Cognac Haze=
BB Black Baffle (6080 only)
=
WB White Baffle (6080 only)
=
Accessories
HB26 C Channel Bar Hangers, 26" Long, Pair=
HB50 C Channel Bar Hangers, 50" Long, Pair=
FK5 5 Amp Field Installable Fuse Kit 300V Max
=
RMB-22 Wood Joist Bar Hanger, 22" Long, Pair
=
HSA6 Slope Adapter for 6" Aperture Housings, Specify Slope
=
Option
WF White Painted Flanged (Self Flanged only)
=
Trims
6081 Self Flanged=
6080 Molded Trim Ring, White
=
Housing
C60 6'' CF Vertical
=
Ballast
E 120/277V 50/60 Hz Electronic
=
3E 347V 50/60 Hz Electronic
=
1D26 26W 120V Dimming, Lutron Compact SE
=
2D26 26W 277V Dimming, Lutron Compact SE
=
1D32 32W 120V Dimming, Lutron Compact SE
=
2D32 32W 277V Dimming, Lutron Compact SE
=
EDR26 DeRated Wattage Label, 26W
=
EDR32 DeRated Wattage Label, 32W
=
Options
CP Chicago Plenum
=
EM Emergency Module with remote test switch
=
Wattage
42 (1) 26W or 32W TTT Lamp
=
B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
C . . . . . . . . . . . . . . . . .
D . . . . . . . . . . . . . . . . . . . . . . . .
I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F . . . . . . . . .
G . . . . . . . . .
H . . . . . . . . .
J . . . . . . . . . .
5 5/8" [143mm]
6 3/8" [162mm]
7" [178mm]
10 3/8" [263mm]
(w i th EM O p t ion )
15 5/8"[397mm]
12"[305mm] A . . . . . . . . . . . . . . . . . . . . . . . . .
CP10 7/8"
[276mm]
Top V i ew
11 3/16"[285mm]
12"[305mm]
E
Energy Data26W Tr ip l e 4 -p i nBallast: Electronic 120V Input Watts: 29, Line Amps: 0.10 277V Input Watts: 29, Line Amps: 0.10 Power Factor: >.99, THD: <10%:Min Starting Temp.: -10 °C (15°F)Sound Rating: A
32W Tr ip l e 4 -p i nBallast: Electronic 120V Input Watts: 36, Line Amps: 0.32 277V Input Watts: 36, Line Amps: 0.16 Power Factor: >.99, THD: <10%: Min Starting Temp.: -10°C (15°F) Sound Rating: A
32W Tr ip l e 4 -p i nBallast: Dimming 120V Input Watts: 38, Line Amps: 0.31 277V Input Watts: 37, Line Amps: 0.13 Power Factor: >.95, THD: <20%:Min Starting Temp.: 10 °C (50°F)Sound Rating: A
NOTES: Accessories should be orderedseparately. For additional options pleaseconsult factory. Alzak is a registered trademark of Aluminum Company of America.
PORTFOLIO
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
11/08/2011 3:00:11 PMConsult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice. ADP050079
DESCRIPTION
Low brightness 8-3/8" aperture downlight for use with a 26W or 32W Triple Twin Tube 4-pin compact fluorescent lamp. The precisely formed non-imaging reflector ensures 50° cutoff to lamp and lamp image and the one piece design eliminates light leaks at the ceiling. Standard features include low iridescent finish on all reflector colors to eliminate "rainbowing" and one electronic ballast to operate 26W and 32W triple lamps. Venting ensures maximum lamp life and lumen output. Open downlight, lens, and open wall wash trims are interchangeable within the same housing.
A ... Reflector.050 thick aluminum, in a one piece spun macrofocal parabolic contour. Available in a variety of Alzak® finishes. Also available with white or black baffle. Positive reflector mounting pullstrim tight to ceiling.
B ... Trim Ring OptionsSelf flanged or molded white trim ring.
C ... Socket CapOne piece vented and finned die cast aluminum cap for maximum thermal performance.
D ... Housing Mounting FrameOne piece precision die cast aluminum 1-1/2" deep collar accommodates varying dimen-sions of ceiling materials.
E ... Universal Mounting BracketAccepts 1/2" EMT, C Channel, T bar fasteners, and bar hangers. Adjusts 5" vertically from above or below ceiling.
F ... Conduit FittingDie cast screw tight connectors.
G ... Junction BoxListed for eight #12AWG (four in, four out) 90°C conductors feed through branch wiring. 1/2" and two 3/4" pry outs. Positioned to allow straight conduit runs. Access to junction box by removing reflector.
H ... Socket4 pin GX24q-3 base with fatigue free stainless steel lamp spring ensures positive lamp retention.
I ... Electronic BallastElectronic ballast provides full light output and rated lamp life. Provides flicker free and noise free operation and starting. End of lamp life protection is standard.
LabelscULus listed, for protected wet locations. C8042
8001/8000
26W, 32W TTT
Compact Fluorescent
8-3/8" MEDIUM BEAMOPEN DOWNLIGHT
ORDERING INFORMATION
Sample Number: Complete unit consists of housing, ballast and trim.
Finish
LI Low Iridescent Clear=
H Haze=
WMH Warm Haze=
G Gold=
WH Wheat=
W Gloss White=
GP Graphite=
GPH Graphite Haze=
K Cognac=
KH Cognac Haze=
BB Black Baffle=
WB White Baffle=
Trims
8001 Self Flanged=
8000 Molded Trim Ring, White
=
8001E Self Flanged, use with IEM
=
8000E Molded Trim Ring, use with IEM
=
Accessories
HB26 C Channel Bar Hangers, 26" Long, Pair
=
HB50 C Channel Bar Hangers, 50" Long, Pair
=
FK5 5 Amp Field Installable Fuse Kit 300V Max
=
RMB-22 Wood Joist Bar Hanger, 22" Long, Pair
=
Option
WF White Painted Flanged (Self Flanged only)
=
Housing
C80 8'' CF Vertical
=
Ballast
E 120/277V 50/60 Hz Electronic=
3E 347V 50/60 Hz Electronic=
1D26 26W 120V Dimming, Lutron Compact SE=
2D26 26W 277V Dimming, Lutron Compact SE=
1D32 32W 120V Dimming, Lutron Compact SE=
2D32 32W 277V Dimming, Lutron Compact SE=
EDR26 DeRated Wattage Label, 26W=
EDR32 DeRated Wattage Label, 32W=
Options
CP Chicago Plenum
=
EM Emergency Module with remote test switch
=
IEM Emergency Module with integral test switch
=
Wattage
42 (1) 26W or 32W TTT Lamp
=
Top View
(wi th IEM Opt ion)
8 3/8”[213mm]
10 3/8”[264mm]
CP 10 7/8”[276mm]
14 3/4”[375mm]
17 5/16”[440mm]
20”[508mm]
13 15/16”[354mm]
9 1/8”[232mm]
9 3/4”[248mm]
PORTFOLIO
LITHO
NIA
COM
MER
CIAL D
OW
NLIG
HTIN
G
329www.lithonia.com | 1-800-315-4935PSG10
Series Lamp type Refl ector Lens3 Voltage Options
LP6FN 13DTT1
18DTT
26DTT
13TRT1
18DTT/TRT2
26-42TRT2
18TRT
26TRT
32TRT
42TRT
Choose refl ector below.
Housing and refl ector may be ordered separately.
Lamp types and maximum wattages are listed for each refl ector.
CGL Clear glass lens
T73 Tempered glass prismatic lens
PCL Clear polycarbonate lens
MVOLT4
120
277
3475
ADEZ Advance® Mark X® electronic dimming ballast, 120V or 277V; minimum dimming level 5%
DMHL LUTRON® Compact SE™ electronic dimming ballast, 120V or 277V; minimum dimming level 5%
EL Emergency battery pack with integral test switch6
ELR Emergency battery pack with remote test switch6
ELRHL High lumen output emergency battery pack; remote test switch provided7
BDP Ballast disconnect plug meets codes that require in-fi xture disconnect
GMF Single slow-blow fuse; specify voltage
RIF1 Radio interference fi lter
LBH Less barhangers
TRW White fl ange
WLP 35K lamp (shipped separately)
COM
PACT FLUO
RESCEN
T
Intended Use
Ideal for a wide variety of
low- to medium-height
ceiling applications including
commercial, retail and hos-
pitality spaces where open,
baffl ed, wallwash and lensed
refl ectors are required.
Construction
Heavy-gauge die-formed
galvanized steel mounting
frame. Vertically adjustable
mounting brackets for use
with 16-gauge fl at barhang-
ers (included), C channels or
1/2" steel conduit. Junction
boxes equipped with two
3/4" and four 1/2" conduit
knockouts with pryout slots
and removable access doors.
Utilizes an extruded socket
housing that attaches to the
refl ector via key hole mount,
which provides superior heat
dissipation and extended
lamp life. Socket housing
also adjusts to accommodate
varying lamp lengths.
Maximum ceiling thickness
1-1/2".
Electrical
Electronic ballast with end
of life protection standard.
Class P thermally protected
ballast that protects against
improper contact with
insulation. Minimum starting
temperature is 0°F/-18°C.
Rated for #12 AWG conductor
through-branch wiring.
Minimum 90°C supply wire.
Ground wire provided.
Listings
Fixtures are UL Listed for
through-branch wiring, Non-
IC recessed mounting, damp
location, and to U.S. and
Canadian safety standards.
ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: LP6FN 26-42TRT 6O9A MVOLT
Open refl ector Baffl e with diff use upper refl ector Wallwash with integral kicker Glass lens (wet location)
6O9 White3
6O9A Clear diff use3
6O9AZ Clear semi-specular3
6O9G Gold diff use3
6O9GZ Gold semi-specular3
6O9PR Pewter diff use3
6O9WTZ Wheat semi-specular3
6B9 Black baffl e8
6B9W White baffl e8
6W9 White
6W9A Clear diff use
6W9AZ Clear semi-specular
6W9G Gold diff use
6W9GZ Gold semi-specular
6W9PR Pewter diff use
6W9WTZ Wheat semi-specular
6LRF1 White splay, clear lens8,9
6LRFB1 Black baffl e, clear lens8,9
6LR4 White splay, fresnel lens8,9
6LRB4 Black baffl e, fresnel lens8,9
6LRF73 White splay, tempered prismatic lens8,9
6LRFB73 Black baffl e, tempered prismatic lens8,9
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
STANDARD PACKAGINGTo order, use single master catalog number.
Example: (13) LP6FN 26-42TRT 6O9A MVOLTFixtures ship as multiple components using optimized packaging. Example above ships as:
(Qty 13) LP6FN 26-42TRT MVOLT (13 cartons of one housing)(Qty 13) 6O9A (13 cartons of one refl ector)
Notes1 Not available with ADEZ or DMHL.
2 Not available with WLP.
3 Damp lens available with 6O9 refl ectors.
4 Electronic multi-volt ballast capable of operating any line voltage from 120-277V, 50 or 60Hz.
5 Not available with EL or ELR.
6 Add 3" (7.6) to width and 4-1/2" (11.4) to length.
7 Not recommended for fi eld installation.
8 White painted fl ange (TRW) standard.
9 Lensed refl ectors are wet location listed.
6" CFL Vertical
10-3/4(27.3)
7-1/2(19.1)
11(27.9)
13(33.0)
Drawings are for dimensional detail only and may not represent actual
mechanical confi guration. Dimensions are shown in inches (centimeters)
unless otherwise noted.
26DTT42TRT
10-3/4”
7-1/2”
26DTT42TRT
26DTT42TRT
LP6FN1-Lamp, Double Twin-Tube (DTT)
1-Lamp, Triple-Tube (TRT)
10-3/4”
7-1/2”
10-3/4”
7-1/2”
10-3/4”
7-1/2”
26DTT42TRT
PRODUCT INFORMATION
LITH
ON
IA C
OM
MER
CIA
L D
OW
NLI
GH
TIN
G
PSG101-800-315-4935 | www.lithonia.com332
MET
AL H
ALID
E
Series Lamp type Refl ector Lens2 Voltage Options
LP6HN Metal halide
50M 50W MP50/C/U
70M 70W MP70/C/U
100M 100W MP100/C/U
Color-corrected metal halide1
50MPC MPC50/C/MED
70MPC MPC70/C/MED
100MPC MPC100/C/MED
Choose refl ector below.
Housing and refl ector may be ordered separately.
Lamp types and maximum wattages are listed for each refl ector.
CGL Clear glass lens
T73 Tempered glass prismatic lens
120/277
120
277
3473
SF Single fuse; specify voltage
LBH Less barhangers
TRW White fl ange
WLP Lamp (shipped separately)
Intended Use
New construction applica-
tions requiring high-per-
formance vertical refl ectors
using HID lamps.
Construction
Heavy-gauge die-formed
galvanized steel mounting
frame. Vertically adjustable
mounting brackets for use
with 16-gauge fl at barhang-
ers (included), C channels or
1/2" steel conduit. Junction
boxes equipped with two
3/4" and four 1/2" conduit
knockouts with pryout slots
and removable access doors.
Utilizes an extruded socket
housing that attaches to the
refl ector via key hole mount,
which provides superior heat
dissipation and extended
lamp life. Socket housing
also adjusts to accommodate
varying lamp lengths.
Maximum ceiling thickness
1-1/2".
Electrical
Frame-ins have medium
base (ED-17) safety sockets
standard rated for metal
halide lamps. Ballast is
encased and potted,
electromagnetic for 347V.
For 120/277V, electronic
is standard for 50M, 70M
and 100M.
Thermally protected against
improper contact with
insulation and approved for
through-branch circuit wiring.
Rated for #12 AWG conductor
through-branch wiring.
Minimum 90°C supply wire.
Ground wire protected.
Listings
Fixtures are UL Listed for
through-branch wiring, Non-
IC recessed mounting, damp
location, and to U.S. and
Canadian safety standards.
ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: LP6HN 50M 609A 120/277
Open refl ector Baffl e with diff use upper refl ector Wallwash with integral kicker Glass lens (wet location)
6O9 White2
6O9A Clear diff use2
6O9AZ Clear semi-specular2
6O9G Gold diff use2
6O9GZ Gold semi-specular2
6O9PR Pewter diff use2
6O9WTZ Wheat semi-specular2
6B9 Black baffl e5
6B9W White baffl e5
6W9 White
6W9A Clear diff use
6W9AZ Clear semi-specular
6W9G Gold diff use
6W9GZ Gold semi-specular
6W9PR Pewter diff use
6W9WTZ Wheat semi-specular
6LRF1 White splay, clear lens4, 5
6LRFB1 Black baffl e, clear lens4, 5
6LR4 White splay, fresnel lens4, 5
6LRB4 Black baffl e, fresnel lens4, 5
6LRF73 White splay, tempered prismatic lens4, 5
6LRFB73 Black baffl e, tempered prismatic lens4, 5
ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.
STANDARD PACKAGINGTo order, use single master catalog number.Example: (12) LP6HN 50M 6O9A 120/277
Fixtures ship as multiple components using optimized packaging. Example above ships as:(Qty 12) LP6HN 50M 120/277 (12 cartons oF one housing)
(Qty 12) 6O9A (12 cartons of one refl ector)
6" Metal Halide
10-3/4”
7-1/2”
10-3/4(27.3)
7-1/2(19.1)
12-3/4(32.4)
13(33.0)
Drawings are for dimensional detail only and may not represent actual
mechanical confi guration. Dimensions are shown in inches (centimeters)
unless otherwise noted.
LP6HN
10-3/4”
7-1/2”
Notes1 Ceramic arc tube consistent-color lamp.
PHILIPS MASTERColor® or GE ConstantColor®.
2 Damp lens available with 6O9 refl ectors.
3 347V ballast only available with encased and potted electromagnetic ballast.
4 Lensed refl ectors are wet location listed.
5 White painted fl ange standard.
10-3/4”
7-1/2”
10-3/4”
7-1/2”
100M100MPC
100M100MPC
100M100MPC
100M100MPC
PRODUCT INFORMATION
When you see this image, you will know the Kenall product shown or described is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. Content of speci�cation sheets is subject to change; please consult www.kenall.com for current product details. © 2011 Kenall Mfg. Co. All rights reserved.
www. kenall.com P: 800-4-Kenall F: 847-360-1781 1020 Lakeside Drive Gurnee, Illinois 60031
M2DL_VF_HF-092711
ModelM2DL6VF 6" Aperture VerticalM2DL8VF 8" Aperture VerticalM2DL6HF 6" Aperture HorizontalM2DL8HF 8" Aperture Horizontal
Lamp Quantity/Type Vertical Lamps1-13Q• One 13 Watt Quad (6" only) 1-18Q One 18 Watt Quad1-26Q One 26 Watt Quad1-18P One 18 Watt PLT 1-26P One 26 Watt PLT 1-32P One 32 Watt PLT 1-42P One 42 Watt PLT
SPECIFICATIONSHOuSINg: .050" aluminum. Fully enclosed and sealed. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
REFLECTOR: Aluminum with clear specular low iridescent anodized finish. See Ordering Information for other finishes.
TRIM: 6" aperture 18-gauge CRS. 8" aperture 16-gauge CRS. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. Antimicrobial finish standard. Trim secured to housing with captive flush mounted Phillips-head stainless steel fasteners. See Ordering Information for other materials/finishes.
LENS: Sealed to trim with continuous lens retention system. Lens orientation, smooth side out.
ELECTRICAL: Fluorescent electronic 120/277/347V ballasts high power factor (<10% THD). RFI suppressor standard. See Ordering Information for optional equipment.
INSTALLATION: Adjustable mounting brackets for use with conduit or c-channel (by others).
PHOTOMETRICS: Efficiency ofM2DL6VF-1-32P-RS-DV-2FW-PAH-CS-G = 52%; S/MH = 1.1,1.1. Efficiency of M2DL8VF-1-32P-RS-DV-2FW-PAH-CS-G = 59%; S/MH = 1.2,1.2. Efficiency of M2DL6HF-1-32P-DV-2FW-PAH-CS-G = 58.9%; S/MH = 1.3,1.3. Efficiency of M2DL8HF-1-42P-DV-2FW-PAH-CS-G = 69.4%; S/MH = 1.4,1.2. For photometric information, go to www.kenall.com.
LISTINgS: UL and CUL Listed for through branch circuit wiring. UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms. MIL-STD-461F – Air Force/Navy Fixed. CCEA Approved. IC Rated (32 System watts maximum).
Lamp Quantity/Type Horizontal Lamps1-13Q• One 13 Watt Quad (6" only) 2-13Q• Two 13 Watt Quads (6" only) 1-18Q One 18 Watt Quad2-18Q Two 18 Watt Quads1-26Q One 26 Watt Quad2-26Q Two 26 Watt Quads1-18P One 18 Watt PLT2-18P Two 18 Watt PLT (8" only) 1-26P One 26 Watt PLT 2-26P Two 26 Watt PLT (8" only)1-32P One 32 Watt PLT 1-42P One 42 Watt PLT
Note: 6"Aperture fixtures IC rated only; on maximum 32 system watts
Ballast TypeRS Rapid Start Electronic <10% THDDM7 Low Voltage Electronic Dimming BallastSB Specified Ballast
VoltageDV 120-277 Volts347 347 Volts (n/a with DM7 ballast)
TrimDCFW Die-Cast Aluminum Flat White (Antimicrobial Finish)DCFB Die-Cast Aluminum Flat Black (Antimicrobial Finish)2FW* CRS Flat White (Antimicrobial finish)2FB* CRS Flat Black (Antimicrobial finish)PAFW* Aluminum Flat White (Antimicrobial finish)PAFB* Aluminum Flat Black (Antimicrobial finish)5BR* Type 304 SS Brushed5FW* Type 304 SS Flat White (Antimicrobial finish)5FB* Type 304 SS Flat Black (Antimicrobial finish)2FCC* CRS Custom Color (Consult Factory)5FCC* Type 304 SS Custom Color (Consult Factory)PACC* Painted Aluminum Custom Color (Consult Factory)
*6" trim uses 18-Ga (CRS/Type 304 SS) or .050"(Aluminum) materials *8" trim uses 16-Ga (CRS/Type 304 SS) or .063" (Aluminum) materials
HousingPAH .050" Painted Aluminum Reflector FinishCS Clear Specular (STD)CSS Clear Semi-SpecularCg Champagne Gold
Lens TypeVoltage OptionsHousing
PAHTrim
ORDERINg INFORMATIONReflector Finish
461FMilitary Standard
Air Force/Navy Fixed
IC Rated
Ballast Type
PRODuCT FEATuRES: » Recessed ceiling mount – 6" & 8"aperture; vertical or horizontal lamp position
» IP65 rated for cleaning protocols required in healthcare applications
» Antimicrobial finish standard on exposed painted trim
» Meets stringent Mil Spec 461F standards for EMI
medmaster™ downlights
M2DL SERIES – CFL
ProJeCt inFormation
Job Name
Fixture Type
Catalog Number
Approved by
DIMENSIONAL DATA (IN INCHES) A B C D E FM2DL6VF 6.38 8.63 10.58 16.13 19.60 16.13M2DL8VF 8.38 10.63 12.58 16.13 19.60 16.13M2DL6HF 6.38 8.63 6.08 17.00 21.60 18.12M2DL8HF 8.38 10.63 8.08 17.00 25.35 21.87RECOMMENDED CEILINg CuTOuT: 6" Aperture 8.125" Dia.8" Aperture 10.125" Dia.
Model Lamp Qty/Type
Lens TypeAcrylicu .125" #12 Prismatic High ImpactT .125" Clear High ImpactuV UV Filtering (Specify)
Polycarbonate2 .125" #12 Prismaticg .125" Clear Specified LensSL Specified Lens
OptionsEL Standard Lumen EL PackPEL High Lumen EL PackBB Black BaffleFS Fuse & HolderWW Single Wallwash
•n/a with DM7 ballast
CCEAApproved
IP65 NSF2 ISO 5Class 100K230
AAperture
B
C
1.375"max ceiling
F
E
D
AAperture
B
C
1.375"max ceiling
CROSS SECTION – VERTICAL
CROSS SECTION – HORIZONTAL
BOTTOM VIEW
RANDOM C 1546 274 74 154
Available colors : ALU ANODISED
INCL.1 x RANDOM 154 PC SBL
INCL.2 x CABLE SUSP. SINGLE AUTO. 5'
INCL.1 x CABLE 3 x 18 AWG
G5 / 120-277V / 50-60Hz / 1 x 1~EG
1 x T5 54W
Weight : 6.2 LBSProtection Level : IP20Distance : 5 m
OPTIONS :COVERPLATE S 103COVERPLATE R 104
For detailed installation instructions, please consult the manual.
Technical Data 1/2
RANDOM C 1546 274 74 154
Technical Data 2/2
MCL (120V only)
MLN / MHN (120 - 277V)
(MHN not shown - see l ine drawing)
MSN (120 - 277V)
Specifications and dimensions subject to change without notice.Consult your representative for additional options and finishes.
FAIL-SAFE®
SPECIFICATION FEATURES
Mounting / Instal lat ion
Fits into standard junction box for
easy installation (single-gang,
handy box, 2" minimum inside
width).
Faceplate
Unique faceplate design distributes
light evenly. Die-cast aluminum
louvered or scoop faceplates.
White painted faceplate standard;
black and brushed nickel paint
options available.
Lens
MSN/MLN//MHN: 4 lenses
accompany each unit and are
quickly and easily field-installable.
Lenses are 0.040" thick
polycarbonate, and are clear,
amber, red, and blue colors. Install
the lens choice based on the
desired color of illumination.
MCL: Clear acrylic lens, 0.040"
thick.
Wattage
<5 input watts.
Labels
- MLN, MHN: Wet location listed.
- MSN: Wet location listed
above 4' mounting height.
- MCL: Dry location listed.
CircadianUNV
LED
Healthcare: Patient
ADF101743
2011-08-19 13:49:53
Circadian LED nightlights and chart lights bring soft, low level
illumination to any environment. Fitting into a standard junction box
(single-gang, handy box, 2" minimum inside width) for easy installation,
the MSN, MHN and MLN operate on 120-277V, delivering up to 30
lumens of illumination. The MCL Chart Light has an illuminated push-
button switch that can be used without disturbing the patient (120V only),
ideal for use in areas such as patient rooms, exam rooms, and nurse
stations.
DESCRIPTION
5"[127mm]
3"[77mm] X
2-11/16"[69mm]
X=1-31/32"[51mm]
4-29/32"[125mm]
3"[77mm] X
2-3/4"[70mm]
X=1-15/16"[50mm]
5"[127mm]
3"[77mm] X
2-11/16"[69mm]
X=1-31/32"[51mm]
Y
Y=1-29/32"[49mm]
Y
Y=1-11/32"[35mm]
Y
Y=1-11/32"[35mm]
MLN
MCL
MSN
For retrofit applications, check width, height and depth of existing junction box. Requires 2” minimum inside width.
4-29/32"[125mm]
3"[77mm]
MHN
1.9”
1.9”
Minimum 30 Lumens
MLN / MHN MCL / MSNMinimum 30 LumensIllumination
Input Wattage
Face Plate
Code Compliance
Input Voltage
Mounting / Installation
Labels
< 5 Watts < 5 Watts
Die-cast aluminum Die-cast aluminum
UL 1598 UL 1598
120-277V MSN - 120-277V MCL - 120V Only
Single-gang junction box(2” minimum inside width)
Single-gang junction box(2” minimum inside width)
ETL listed ETL listed - MSN, UL listed - MCL
SPECIFICATIONS
Catalog # Type
Date
Project
Comments
Prepared by
Specifications and dimensions subject to change without notice.Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
Circadian UNV - MLN, MHN, MCL, MSN
S A M P L E N U M B E R : M S N - UNV- W
Product Family
MSN= Medical Scoop Nightlight 1, 2
MLN= Medical Louver Nightlight 1, 2
MHN= Medical Horizontal Louver 1, 2
Voltage
UNV=120-277V
Faceplate Finish
W=White Paint
B=Black Paint
BN=Brushed Nickel Paint
Custom Colors available (specify or supply sample - consult factory)
NOTES:
1 Wet location standard on MLN, MHN and MSN.
UNIVERSAL VOLTAGE : MHN / MLN / MSN
2 Product ships standard with white (4000K) LEDs and a clear polycarbonate lens. Colored lenses ship with each fixture, to field-convert the white color to amber, red or blue - by replacing the clear lens with the lens of choice.
UNV
ORDERING INFORMATION
ADF101743
2011-08-19 13:49:53
S A M P L E N U M B E R : M C L - W- 1 2 0 - W
Product Family
MCL= Medical Chart Nightlight
LED ColorW=WhiteA=AmberR=Red
Voltage120=120V
Faceplate FinishW=White PaintB=Black PaintBN=Brushed Nickel PaintCustom Colors available(specify or supply sample - consult factory)
NOTES:
1
OptionsPHC=Photocell (in place of
standard on/off switch)
The MCL version of Circadian is supplied with a photo optic cell which turns the light source (LED) off when the ambient light rises above the MCL set point or threshold. In a very limited number of applications, where the sustained ambient light is at or near the MCL set point, the user may experience “flickering” of the light. To avoid “flickering”, do not install the MCL in areas such as in dark shadows or dark corners. Should flickering occur, relocate the MCL to an area of higher ambient light.
MCL 120
1
120V MCL
MCL ORDERING INFORMATION
Specifications and dimensions subject to change without notice.Consult your representative for additional options and finishes.
FAIL-SAFE®
SPECIFICATION FEATURES
Mounting
Recessed grid or flange, ceiling
mount. Standard 1" or 1 1/2" NEMA
Type "G" ceiling systems. Surface-
mount available.
Lamps
By others.
Housing
Die-formed, 20 ga. cold-rolled steel.
Seam-welded construction, absent
of holes. Optional brushed or
painted stainless steel and painted
white aluminum.
Door
Door is hinged to the housing with
two stainless steel aircraft cables.
Continuous piano hinge optional.
Fasteners
Captive stainless steel Philips head
screws secure door frame to the
housing.
Door Frame
Cold rolled steel, painted white, flat
inset door standard. Optional white
painted extruded aluminum,
anodized extruded aluminum, and
brushed stainless steel, flat inset.
Gasket
Closed-cell silicone gasket seals
door to housing.
Finish
High gloss, electrostatically
applied, white powder coat finish,
average minimum reflectance 92%.
500 hour salt spray test.
Lens
One-piece asymmetric/symmetric
acrylic lens. RFI 3/8" square
metalized grid, grounded to
housing. Clear, smooth acrylic lens
below primary lens for ease of
cleaning. Other lenses available,
refer to Ordering Information.
Bal last
Standard, Class P, CBM/ETL
electronic ballast.
Compliance
MIL-STD-461F available with
standard electronic ballasts and
dimming ballasts, when ordered
with MIL1, MIL2 or MIL3 Option
(ASY/SYM/RFI or 89BC lens
required). Results furnished upon
request. See Options for exact
catalog nomenclature.
Labels
UL/cUL listed, standard wet
location. IP65 rated.
ORM2x2
2x4
1x4
Fluorescent
Healthcare: Operating Room
RECESSED FLANGE
RECESSED GRID
SURFACE
Fail-Safe's development of the asymmetric/symmetric ORM represents
the latest technology in precise control of light to the surgical task and to
the surrounding area, and allows multi-level lighting without changing
the character of the lighting distribution. The ORM's high efficiency and
precise lighting distribution delivers high illumination to the surgical task
area. Quality and value are maintained to provide the best performance
solution for your design needs.
DESCRIPTION
ORM-G 1x4 CROSS-SECTION
[103mm]4 1/16"
11 11/16"[297mm]
ORM-G 2x2/2x4 CROSS-SECTION
23 11/16"[602mm]
4 1/16"[103mm]
4 11/16"[119mm]
12"[305mm]
ORM-S 1x4 CROSS-SECTIONORM-S 2x2/2x4 CROSS-SECTION
4 1/16"[119mm]
24"[610mm]
ORM-F 1x4 CROSS-SECTION
1x4 ceiling cut-out dimensions: 12” (W) x 48 5/16” (L)
ORM-F 2x2/2x4 CROSS-SECTION
2x2 ceiling cut-out dimensions: 24” (W) x 24 5/16” (L)2x4 ceiling cut-out dimensions: 24” (W) x 48 5/16” (L)
4 3/4”[120.29]
4 3/4”[120.29]
11 11/16”[296.86]
23 11/16”[601.66]
NOTE: “MIL” box required for MILSTD461F compliance, adds 2” to overall fixture height, all sizes and mounting configurations. See Options for “MIL” specification.
Wet Location
IP65 rated
Catalog # Type
Date
Project
Comments
Prepared by
ADC091967
2011-11-14 15:49:31
Specifications and dimensions subject to change without notice.Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ORM
617 =(6) 17W T8 Lamps
G=Grid (1” & 1-1/2” T-Bar) F=Flange (Swing-out brackets standard)
Lamp Type
Ce i l ing Type
ORM = Operating Room/ Surgical
ORM
ProductFami ly
120=120V277=277V347=347V
Vol tage
Electronic Ballast
EB82=(2) Ballasts, Instant Start, T8 lamps
Ballast
EBP =Emergency Battery Pack 4
GLR =Fuse and Holder 1/RIF=1 Radio Interference Filter 5, 10
Opt ions
SAMPLE NUMBER: ORM-G-24 -632 -UNV-ASY/SYM/RF I -EB83-ALXP-SHN-CPH
CPH=Continuous Piano Hinge 2
SW=Sealed Wireway
EB83=(3) Ballasts, Instant Start, T8 lamps
24 =24” Wide12 =12” Wide
Width
614 =(6) 14W T5 Lamps 624 =(6) 24W T5HO Lamps
417 =(4) 17W T8 Lamps 414 =(4) 14W T5 Lamps
440BX=(4) 40W Biaxial Lamps
UNV =120V-277V
S =SurfaceA125 =Pattern 12 acrylic,
0.125” thick
Lens
EB52=(2) Ballasts, T5 lamps EB53=(3) Ballasts, T5 lamps
Door/F in i sh Opt ions
Blank=Die-formed, cold rolled steel, white powder coat finish, flat inset door for recessed unit. Overlapping, steel, white powder coat for surface.ALP=Die-formed Aluminum, white powder coat finish, flat inset door SSP=Stainless Steel, white powder coat finish.SSN=Stainless Steel Brushed finish, flat inset doorALX=Extruded Alumium, Clear Anodized finish, flat inset doorALXP=Extruded Aluminum, white powder coat finish, flat inset door
SHN=Stainless Steel Housing, Brushed finishALH=Aluminum Housing, white powder coat finish
ASY/SYM=Asymmetric/Symmetric LensASY/SYM/RFI=Asymmetric/Symmetric Lens with RFI grid
Blank=20 ga. Cold Rolled Steel, white powder coat finishSHP=Stainless Steel Housing, white powder coat finish
EQ=Earthquake Clips
TAD =Top Access Door
TED =Top Entry Door (
Hous ingOpt ions
632=(6) 32W T8 Lamps 628=(6) 28W T5 Lamps 654=(6) 54W T5HO Lamps 432=(4) 32W T8 Lamps 428=(4) 28W T5 Lamps
454=(4) 54W T5HO Lamps
EB51=(1) Ballast, T5 lamps
EB81=(1) Ballast, Instant Start, T8 lamps
2x2 2x4
332=(3) 32W T8 Lamps 328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
232=(2) 32W T8 Lamps 228=(2) 28W T5 Lamps
254=(2) 54W T5HO Lamps
1x4
424=(4) 24W T5HO Lamps
450BX=(4) 50W Biaxial Lamps
317=(3) 17W T8 Lamps
314=(3) 14W T5 Lamps 324 =(3) 24W T5HO Lamps
332=(3) 32W T8 Lamps
328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps
door accessible from room side)
(door accessible from plenum only)
Surface-mount door is overlapping, steel, with white powder coat finish. Not available with ALXP, ALX, SSP, SSN. Recessed door is flat inset standard.CPH available with ALXP or ALX options only.ALX door option not IP65 rated.Specify voltage.
NOTES:
For dimming ballast, specify quantity and catalog number.
EBX1=(1) Ballast, BX lamps EBX2=(2) Ballasts, BX lamps
1, 3
240 BX =(2) 40W Biaxial Lamps250 BX =(2) 50W Biaxial Lamps
255BX =(2) 55W Biaxial Lamps340 BX =(3) 40W Biaxial Lamps
350 BX =(3) 50W Biaxial Lamps355BX =(3) 55W Biaxial Lamps
455BX=(4) 55W Biaxial Lamps
GEN1 =Interim lighting for generator back-up systems; 1-lamp operation
GEN3 =Interim lighting for generator back-up systems; 2- or 3-lamp operation
AM = Anti-microbial finish (all painted parts)
87 120V only. (277V applications, consult factory.)
36” opening for MIL spec.
MIL1 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, single circuit.
1, 6
ER82=(2) Ballasts, Rapid Start, T8 lamps ER83=(3) Ballasts, Rapid Start, T8 lamps
ER81=(1) Ballast, Rapid Start, T8 lamps
7, 9, 12
MIL2 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 2 circuits.
MIL3 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 3 circuits.
9 Wiring box placed on fixture housing, adding 2” to fixture height.10 RIF does not ensure MILSTD461F rating. MIL1, MIL2, MIL3 ensures
MILSTD461F rating.
KSH25= Bat Wing Distribution89BC= 0.125” thick KSH19 RFI - symmetrical
MIL spec not available for surface mount.7, 9, 12
7, 9, 12
1
1
1
2345
6For (1) RIF, specify as 1/RIF, for (2) RIFs, specify as 2/RIF, (3) RIFs, specify as 3/RIF.
8
11
11 Multiple ballasts (standard and EM) may require ballast(s) to be mounted in a back-box on the fixture housing, which will increase fixture height. Consultfactory for details.
4
8
12 For MILSTD461F compliance, the ASY/SYM/RFI or 89BC lens is required, alongwith either MIL1, MIL2 or MIL3 option. Radio Interference Filters (RIF) are not required.
2/RIF=2 Radio Interference Filters 5, 10
3/RIF=3 Radio Interference Filters 5, 10
ORDERING INFORMATION
Please contact customer service representative or visit our website @ www.cooperlighting.com.
PHOTOMETRICS
ADC091967
2011-11-14 15:49:31
.©2010 Deco Lighting • “The Brand Name for Quality” • A division of Deco Enterprises, Inc.
Job Information
Catalog #:
Project:
Comments:
Prepared by:
Type:Outdoor lighting
D814Contemporary Outdoor Luminaire
Outdoor Lighting
DescriptionThe D814 Contemporary Outdoor Luminaire provides glare free and symmetrical illumination. The design of the top shade ensures the majority of the light is directed downward. The anti-glare ring shields the lamp from direct view. Standard finish is dark bronze, but other architectural colors are available. Ideal for streets, parking lots, and surrounding areas.
Features• Housing is 1/8” thick spun aluminum hood with (4) 1” O.D. extruded
aluminum supports and cast aluminum pole fitter.• Spun aluminum white painted reflector.• Injection molded polycarbonate cylinder lens.• High power factor ballast is removable for easy maintenance.
ORDERING INFORMATION:Example: (D814-100-M-MT-BZ-LP)
D814Series
ContemporaryOutdoor Luminaire
1 Standard color for this fixture2 Contact factory for custom finishes3 Please specify voltage (eg. 120V)
VoltageEB - 120/277V Electronic Ballast
DT - 120/277VMT - 120/208/240/277V
Lamp SourceM - Metal Halide
PS - Pulse Start Metal HalideS - High Pressure SodiumC - Compact Fluorescent
Wattage35 - 35W50 - 50W70 - 70W
100 - 100W150 - 150W175 - 175W250 - 250W
126 - (1) 26W CFL132 - (1) 32W CFL142 - (1) 42W CFL
OptionsWSF - Wired Single Fuse3
WDF - Wired Double Fuse3
LP - Lamp IncludedPC - Photocell3
QR - Quartz restrike
FinishBZ - Bronze1
BK - BlackWH - WhiteSL - SilverG - Green
CC - Custom2
Dimensions35”
8” / 12”26-150W / 175W & 250W
25”
Pulse Start MH Magnetic Ballast
100MH5 250PSMH E 350PSMH3 E 875PSMH4
150MH5 250PS90** E 400PSMH3 E
175PSMH E 320PSMH3 E 750PSMH4
Standard MHMagnetic Ballast
175MH* 250MH* 400MH*,3
CosmoPolis Electronic System(See Notes 6,7,8,9)
60CMPE90CMPE140CMPE
MasterColor Elite Electronic System(See Notes 6,7,9,10)
210MCE-3K E 315MCE-3K E
210MCE-4K E 315MCE-4K E
Pulse Start MH Electronic Ballast
(See Note 9)150PSE5 E 175PSE E 250PSE E 320PSE3, E
High Pressure Sodium Magnetic Ballast
70HPS 150HPS 400HPS 750HPS4
100HPS 250HPS 600HPS
Low Pressure SodiumMagnetic Ballast
35LPS
* 175MH, 250MH and 400MH not available for sale in the United States.
** 250PS90 includes a 90% efficient magnetic PSMH ballast, meeting the requirements of California Title 20, effective 1/1/2010.
Wattages marked with Circle “E” meet federal energy efficiency standards applicable to 150 watt through 500 watt metal halide luminaires only.E
G18 18" Gullwing Luminaire
Job:Type: Notes:
GullwingG18 Area LuminairesPage 1 of 3
The Philips Gardco Gullwing is an area luminaire defined by its sleek profile and rugged construction. The housing is one-piece, die cast aluminum and mounts directly to a pole or wall without the need of a separate support arm. The multifaceted arc-image duplicating optical systems provide IES Types I, II, III, IV and V distributions. The door frame is single-piece diecast aluminum and retains an optically clear tempered flat glass lens. The luminaire is completely sealed and gasketed preventing intrusion from moisture, dust and insects. Gullwing luminaires are finished with a fade and abrasion resistant TGIC powdercoat. Flat glass lens luminaires provide full cutoff performance. Sag Lens luminaires provide cutoff performance.
PREFIX MOUNTING
waTTaGE
1 Single Pole Mount2 Twin Pole Mount at 180°2@90 Twin Pole Mount at 90°3 3-way Pole Mount at 90°3@120°1 3-way Pole Mount at 120°4 4-way Pole Mount w Wall Mount, Recessed J-Box wS Wall Mount, Surface Conduit
1611 Clovis Barker Road, San Marcos, TX 78666 (800) 227-0758 (512) 753-1000 FaX: (512) 753-7855 sitelighting.com© 2011 Koninklijke Philips Electronics N.V. All Rights Reserved. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
79115-85/1111
PREFIX MOUNTING waTTaGEDISTRIBUTION VOLTaGE FINISH OPTIONS
Enter the order code into the appropriate box above. Note: Gardco reserves the right to refuse a configuration. Not all combinations and configurations are valid. Refer to notes below for exclusions and limitations. For questions or concerns, please consult the factory.
DISTRIBUTION
NOTES:2. Not available above 400 watts.3. Requires E28/BT28 lamp.4. Furnished with sag glass lens only.5. Mogul base lamp required.6. 347V and 480V CMPE and MCE systems include and require an auxilliary transformer.7. CosmoPolis and MasterColor Elite Systems are supplied with lamp. 8. Available with LumiStep ballast Option, see page 2.9. See QS / Q924 Table on page 2.10. “-3K” suffix specifies a 3000°K lamp and “-4K” suffix specifies a 4000°K lamp.
VOLTaGE
120208200-277 CMPE, MCE and PSE types only.
12 2XL 3XL 4XL BLC2 Q2 aF
240277
347480
1. Not available with PTF option.
Type I, Horizontal Lamp Type II, Horizontal LampType III, Horizontal LampType IV, Horizontal LampBacklight Control Type V, Horizontal Lamp Concentrated Optic for Automotive Front Row ApplicationsAvailable in 210MCE, 315MCE, 250PS90,250PSMH and 400PSMH wattages only.
A
C
31 1/2"80.01 cm 18"
45.72 cm
6 1/2"16.66 cm
11 1/2" 29.21 cm
With Sag Glass Lens
11.2 ft2
.11 m2
EPA Data
22.4 ft2
.22 m2
3-43.2 ft2
.30 m2
8"20.32 cm
1611 Clovis Barker Road, San Marcos, TX 78666 (800) 227-0758 (512) 753-1000 FaX: (512) 753-7855 sitelighting.com© 2011 Koninklijke Philips Electronics N.V. All Rights Reserved. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
79115-85/1111
Page 2 of 3
GullwingG18 Area Luminaires
9. See QS/Q924 Table. 11. Not available above 400 watt.12. Not available in 480V. Provide specific input voltage.13. 250W maximum. Polycarbonate lenses carry a 1 year warranty only.14. In lieu of flat glass. Supplied standard and required with 750 watt and higher wattages.15. Required for 3" O.D. round or tapered round poles where top O.D. is less than 4”.16. Required for 4"- 5" O.D. round poles.17. Mounts to a 2-3/8" O.D. mast arm.18. Mounts to a 2-3/8"Top Tenon. Specify a pole with a 4.50" O.D. for a smooth transition. 19. Not available in 120° mounting configurations.20. Requires a 2-3/8"O.D. x 4" tenon or a 2.4" round pole top O.D. Specify Drilling (1, 2, 2@90, 3 or 4 only.) 21. Available only with 175PSMH through 400PSMH and 150HPS through 400HPS wattages. Includes dual-level capacitor and wiring to connect to Gardco Motion Response System. 22. Available with CosmoPolis system only. See submittal sheet GE200-005 for complete information on LumiStep ballasts.
FINISH OPTIONS
DIMENSIONS aND EPa
BRP Bronze Paint
BLP Black Paint
wP White Paint
NP Natural Aluminum Paint
OC Optional Color Paint Specify Optional Color or RAL ex: OC-LGP or OC-RAL7024.
SC Special Paint Specify. Must supply color chip.
F11 Fusing In Head LF In-Line/In-Pole Fusing PC12 Photocontrol and Receptacle PCR Photocontrol Receptacle onlyPOLY13 Polycarbonate Sag LensSG14 Sag Glass Lens HS Internal Houseside ShieldQS9 Quartz StandbyQST9 Quartz Standby - Timed Delay Q9249 Quartz EmergencyQT9249 Quartz Emergency - Timed DelayRPa115 3" Round Pole AdapterRPa216 4" and 5" Round Pole AdapterMF17 Mast Arm Fitter
TR118 Single TransitionTR218 Twin TransitionPTF219 Pole Top Fitter - 2 3/8” - 3” Dia. TenonPTF319 Pole Top Fitter - 3” - 3 1/2” Dia. TenonPTF419 Pole Top Fitter - 3 1/2” - 4” Dia. TenonSQPTF20 Square Pole Top Fitter GMR21 Provision for Gardco Motion ResponseL622 LumiStep Ballast 6 hourL822 LumiStep Ballast 8 hourL1022 LumiStep Ballast 10 hour
(Note 9) QS / Q924 Table
HID Lamp Watts
Maximum Quartz Lamp Watts
175 watts or less 100 Watts
Above 175 watts up to 400 watts
150 Watts
QS, QST, Q924, QT924 are not available with CMPE, MCE or PSE wattages or in luminaires above 400 watts HID.
GENERaL DESCRIPTION: The Philips Gardco Gullwing is an area luminaire defined by its sleek profile and rugged construction. The housing is one-piece, diecast aluminum and mounts directly to a pole or wall without the need of a separate support arm. The multifaceted arc-image duplicating optical systems provide IES Types I, II, III, IV and V distributions. The door frame is single-piece diecast aluminum and retains an optically clear tempered flat glass lens. The luminaire is completely sealed and gasketed preventing intrusion from moisture, dust and insects. The Gullwing luminaires are finished with a fade and abrasion resistant TGIC powdercoat.
HOUSING: A one-piece die cast aluminum housing mounts directly to a pole or wall without the need for a support arm. The low profile rounded form reduces the effective projected area of the luminaire to only 1.2 ft2 /.11 m2.
LENS aSSEMBLY: A single-piece diecast aluminum lens frame hinges down from the housing and is secured by a stainless steel lanyard and hinge pin.
An optically clear, heat and impact resistant tempered flat glass lens is mechanically secured with eight retainers. The electrical and optical chambers are thoroughly sealed with a one-piece memory retentive hollow-core EPDM gasket to prevent intrusion by moisture, dust, and insects.
OPTICaL SYSTEMS: The segmented optical systems are manufactured from homogenous sheet aluminum which has been electrochemically brightened, anodized and sealed. The multifaceted arc image duplicating systems are designed to produce IES Types I (1), II (2XL), III (3XL), IV (4XL and BLC), and V (Q). With the 2XL, 3XL and 4XL luminaries, the reflector facets form a conical fan around the arc tube with each facet positioned to be precisely tangent to the top of the arc tube.
The lampholder is glazed porcelain with a nickel plated screw shell. Position-oriented mogul base sockets to accept high output horizontal metal halide lamps are supplied standard.
ELECTRICaL: All electrical components are UL recognized and factory tested. Electronic and magnetic HID ballasts are high power factor and mounted on a unitized tray with quick electrical disconnects. Magnetic HID ballasts are the separate component type. Electronic and magnetic HID ballasts are capable of providing reliable lamp starting down to -20°F / -29°C.
Luminaires provided with the CosmoPolis or MasterColor Elite high performance ceramic metal halide electronic systems include high power factor electronic ballasts, designed specifically for the system selected.
FINISH: Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors.
LaBELS: All luminaires bear UL or CUL (where applicable) Wet Location labels.
waRRaNTY: Philips Gardco luminaires feature a 5 year limited warranty. See Warranty Information on www.sitelighting.com for complete details and exclusions. Polycarbonate lenses carry a 1 year warranty only.
FULL CUTOFF PERFORMaNCE: Full cutoff performance means a luminaire distribution where zero candela intensity occurs at an angle at or above 90° above nadir . Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10 percent) at a vertical angle of 80° above nadir. This applies to all lateral angles around the luminaire.
CUTOFF PERFORMaNCE: Cutoff performance means a luminaire distribution where the candela per 1000 lamp lumens does not numerically exceed 25 (2.5 percent) at an angle at or above 90° above nadir, and 100 (10 percent) at a vertical angle of 80° above nadir. This applies to all lateral angles around the luminaire.
Page 3 of 3
SPECIFICaTIONS
1611 Clovis Barker Road, San Marcos, TX 78666 (800) 227-0758 (512) 753-1000 FaX: (512) 753-7855 sitelighting.com© 2011 Koninklijke Philips Electronics N.V. All Rights Reserved. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
79115-85/1111
GullwingG18 Area Luminaires
42"
14" BR160 Only
BR162, 163 Only
Job:Type: Notes:
Bollard 10 - BR160 / 162 / 163Page 1 of 2
Philips Gardco Bollard 10 luminaires provide efficient low glare illumination from a highly durable seamless architectural form. Utilizing the Form 10 faceted optical system, precise beam control is achieved and discomforting brightness is eliminated. A .250" cast aluminum housing and .188" injection molded acrylic lens assures exceptional vandal resistance. Each Gardco BR160/162/163 is a bollard luminaire utilizing 50W through 175W high intensity discharge lamps. Units are totally sealed and gasketed, preventing intrusion of moisture, dust and insects into the lamp or electrical chambers.
BOLLARD
PREFIX
voltagE
HEIgHt
FInIsH
BRP Bronze Paint
BlP Black Paint
WP White Paint
nP Natural Aluminum Paint
vP Verde Green Paint
oC Optional Color Paint
sC Special Color Paint
Specify RAL designation as ex: OC-RAL7024.
Specify. Must supply color chip.
1611 Clovis Barker Road, san Marcos, tX 78666 (800) 227-0758 (512) 753-1000 FaX: (512) 753-7855 sitelighting.com© 2011 Koninklijke Philips Electronics N.V. All Rights Reserved. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
79115-32/0511
WattagE
120
208
240
277
oPtIons
PREFIX oPtICs WattagEHEIgHt voltagE FInIsH oPtIons
Enter the order code into the appropriate box above. Note: Philips Gardco reserves the right to refuse a configuration. Not all combinations and configurations are valid. Refer to notes below for exclusions and limitations. For questions or concerns, please consult the factory.
oPtICsBR160 Head Only
BR162 with Aluminum Base
BR163 with Natural Concrete Base
BR163B with Beige Concrete Base
BR163g with Grey Concrete Base
3 Type III
FM Type IV
Q Type V
Pulse Start MH Magnetic Ballast
50MH 100MH 175PsMH E
70MH 150MH
Standard MH Magnetic Ballast*
175MH*
High Pressure Sodium Magnetic Ballast
50HPs1
100HPs 150HPs70HPs
* 175MH not available for sale in the United States.
Wattages marked with Circle “E” meet federal energy efficiency standards applicable to 150 watt through 500 watt metal halide luminaires only.E
F Fusing
DUP Duplex Receptacle
gFCI GFCI Receptacle
Available in BR162 only. Weathertight, flush-mounted in lower housing.
Available in BR162 only. Weathertight, flush-mounted in lower housing.
UPPER HoUsIng: Housing sections are .250" wall seamless cast aluminum. Lens is one piece .188" thick injection molded clear non-yellowing DR acrylic secured between upper and lower housing sections with three (3) 1/2" diameter chrome plated steel posts. Silicone gasketing allows for thermal expansion while maintaining a weathertight operation of the optical system.
loWER HoUsIng/anCHoRagE: BR160Head-only luminaire is designed for mounting on concrete pedestal or architectural elements (by others). Mounting plate is cast aluminum with slots to accept anchor bolts (by others) at 90° on a 12 1/4" diameter bolt circle. Ballast is attached to the mounting plate.
BR162 16" diameter mounting base is .125" wall aluminum. Integral cast aluminum top section is secured to the mounting foundation with four (4) 3/8" x 8" x 1", 1/2" diameter anchor bolts on 12 1/4" diameter bolt circle. Ballast mounting plate is positioned at the top of base, easily accessible for service.
BR163 Base assembly consists of 7 gauge (.179") x 19" diameter galvanized steel plate fastened to pre-cast concrete base. The base is constructed with steel molds and wire reinforcing and is acid-etched to provide a smooth textured aggregate finish. Assembly is secured and leveled to the mounting foundation with four (4) 3/8" X 8" X 1", 1/2" diameter anchor bolts on a 17 1/2" bolt circle. Base is designed for 2" direct burial.
oPtICal sYstEM: The Form 10 optical system segments are formed from homogeneous sheet aluminum, electrochemically brightened, anodized and precisely positioned in reflector pan to produce IES Types III (3), IV (FM) or V (Q) distributions. Mogul base lampholder is glazed porcelain with nickel plated screw shell and is securely attached to the reflector assembly. 50MH, 70MH, and 100MH units have medium base lampholders.
ElECtRICal: Each high power factor ballast is the separate component type, capable of providing reliable lamp starting down to -20° F. Component-to-component wiring within the luminaire will carry no more than 80% of rated current and is listed by UL for use at 600 VAC at 150°C or higher. Plug disconnects are listed by UL for use at 600 VAC, 15A or higher.
FInIsH: Each luminaire receives a fade and abrasion resistant electrostatically applied, thermally cured and textured polyester powdercoat finish.
laBEls: All fixtures bear UL or CUL (where applicable) Wet Location labels.
WaRRantY: Philips Gardco luminaires feature a 5 year limited warranty. See Warranty Information on www.sitelighting.com for complete details and exclusions. Polycarbonate lenses carry a 1 year warranty only.
Page 2 of 2
DIMEnsIons
1611 Clovis Barker Road, san Marcos, tX 78666 (800) 227-0758 (512) 753-1000 FaX: (512) 753-7855 sitelighting.com© 2011 Koninklijke Philips Electronics N.V. All Rights Reserved. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
79115-32/0511
Bollard 10 - BR160 / 162 / 163BOLLARD
sPECIFICatIons
42"(106.68cm)
16" (40.64cm) Diameter Concrete Base
6" (15.24cm) Conduit Entrance
17.5" (44.45cm) Bolt Circle
19" (48.26cm) Diameter Mounting Plate
14" (35.56cm)
16" (40.64cm)
12.25"(31.12cm) Bolt Circle
16" (40.64cm)
6"ø (15.24cm)
stub up area
notE: Factory supplied template must be used when setting anchor bolts. Philips gardco will not honor any claim for incorrect anchorage placement from failure to use factory supplied templates.
6"ø (15.24cm)stub up area
a l i g h t 3 7 2 8 M a r i t i m e W a y O c e a n s i d e , C A 9 2 0 5 6 P H 7 6 0 . 7 2 7 . 6 6 2 7 F X 7 6 0 . 7 2 7 . 7 6 9 5 www.alights.com S e p t e m b e r 2 0 1 0
D3 Series - Submittal Project:
See Specification Guide for additional nomenclature details. Type:
accolade3
Direct Suspended/Surface/Wall Mount Luminaire
Housing: 60% recycled aluminum. Canopy: Satin white is standard unless otherwise specified. Square is standard on aircraft cable; round for stem - specify if earthquake zone. Suspension: 4ft 1mm diameter stainless steel aircraft cable w/ fully adjustable grippers and locking device, or stem painted white unless otherwise specified, or various wall mount options available. Individual or continuous row. Wiring: 5’ Plastic coated-braided metal, flexible cord or wired from inside wall directly into fixture or J Box mount. Finish: Powder Coated. UL Approved
SPEC. NOM. DESCRIPTION SPEC. NOM. DESCRIPTION
Le
ng
th
2 3 4 6 8 9
12 R___
G___
Nominal Lengths: 2’ (Refer to Spec Guide for 2ft louver availability) 3’ 4’ 6’ 8’ 9’ 12’ R___ Row, seamlessly linked. Specify row length > 12ft. Indicate if your length is nominal or exact. If applying MR16 modules, specify overall row length & complete MR16 addendum. G___ Run, single fixtures linked via external wiring. Specify run length w/ spacing between fixtures. Typical for wet location.
Mo
un
tin
g
S D P
R M1 M2 M3 M5 H1 H5
F J A C
Single adjustable stainless steel 4ft aircraft cable, white canopy Dual adjustable stainless steel 4ft aircraft cable, white canopy Pendant/Stem - Rigid white stem suspension/power drop. Indicate if earthquake zone? Yes___ or No___ May use above mountings for Wood/Metal/Acoustic Tile Ceilings for flush suspension. Mounting directly against wall Window Mullion Mount Blocks - 1” deep (consult factory) Window Mullion Mount Blocks - 2” deep (consult factory) Window Mullion Mount Blocks - 3/8” deep (consult factory) Window Mullion Mount Blocks -1/2” deep (consult factory) Horizontal Wall Mount Setoff Bracket - 1" deep * Horizontal Wall Mount Setoff Bracket - 1/2" deep * * H1 & H5 Brackets mount to a 4-O box (provided by contractor). Surface Mount Span Mount (consult factory) Cantilever as per specification Custom as per specification
La
mp
ing
S H D O 2 4 3
In Cross Section: (1) Standard T5 lamp (1) T5HO lamp (2) Standard T5 lamps in cross section (2) T5HO lamps in cross section Staggered - Single lamp standard T5 Staggered - Single lamp T5HO MR16 module - 6” typical, module lengths may vary according to row
lengths. Use encapsulated 35w aluminized back or 37w IR lamps only.
Contact factory for LED Increments of 2’, 3’ or 4’ use 2, 3 or 4ft T5 lamping respectively unless specified or when staggering.
Vo
lta
ge
U 1 2 3
Universal Voltage 120 - 277V 120 Volt - specify when dimming 277 Volt - specify when dimming 347 Volt
Ho
us
ing
Fin
ish
T W L B E A O C
a l i g h t a n i u m ™ is standard
Satin White T002-WH08 Gloss White T009-WH11 Satin Black T002-BK08 Textured Satin Eggshell White T032-WH15 Anodized - Specify color Other existing powdercoat color - Specify RAL# Custom manufactured color - Consult factory **Specify in addendum if canopy or stem requires other color from indicated standard.
Do
wn
Lig
ht
Sh
ield
ing
P W T A L H S
R__ K__ ZW ZA
ZW___ ZA___ MA__
C
a p a r a b o l a ™ parabolic louver (1 lamp in cross only)
a p a r a b o l a ™ wall wash louver (1 lamp in cross only)
2-Lamp parabolic louver (2 lamp in cross only) a c i r r u s ™ opal acrylic diffuser
LexEfxTM
specular screen print on diffuse acrylic H T L O ™ high transmission lamp obfuscating lens
W I S P ™ whiter shade of pale - captive frosted lens
” Regressed Lens + lens insert - choose “A”, “L” or “H” a w a s h ™ wall-wash kicker + lens - choose “A”, “L”, “H” or “S”
FIT™ flat parabolic white louver FIT™ flat parabolic aluminum (matte specular) louver a l e n s z i l l a ™ white louver + overlay - choose “A” or “H”
a l e n s z i l l a ™ aluminum louver + overlay - choose “A” or “H”
Adjustable MR16 Module - add quantity per row Custom distribution - consult factory
Op
tio
ns
D E F M N R L O K W
Dimming - Specify manufacturer & voltage. Emergency - Specify lumens. *No EMG on lengths 3ft or less. External Fusing Multi-Circuit (standard on MR16 specifications) New York City Code Right Endcap Feed Left Endcap Feed Occupancy/Daylight Sensor Natatorium - Damp location. Wet Label - Wet location. Not available in rows. Available as runs. Natatorium & Wet Label require a lens. Typical installation is as a downlight - if this fixture will be installed as an uplight, vertical or on its side, etc., note in addendum how fixture will be positioned so that wet location weep holes may be properly placed.
ORDERING NOMENCLATURE GUIDE
Quantity Series Length Lamping Voltage Down Light Shielding
Mounting Housing Finish
Options
D3
Refer to Specification and Installation Guides in the catalog or on our website for more details.
Fluorescent shown
Refer to Spec Guide for details on how to specify a row or run.
3-1/2”
3-1/2”
Complete
MR16
addendum
Complete MR16 addendum.
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
05/27/2009 3:35:19 PMConsult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice. ADL041202
DESCRIPTION
Monaco 6000N is a versatile, HID inground illuminator for use with T4.5, T6 or ED17 metal halide, E17 high pressure sodium and triple tube compact fluorescent lamps. It includes the Venterra(TM) heat & water management system, insuring years of uninterrupted performance. Fixture includes lamp, factory-installed in a waterproof lamp module.
A ... MaterialRecessed housing and side-mounted wiring compartment are constructed from corrosion-proof, injection-molded polycarbonate. Trim ring is constructed from corrosion-resistant brass or stainless steel.
B ... Finish: Painted Brass, Natural Brass or Stainless SteelPainted trim rings are constructed from solid brass and double protected by a chemical film undercoating and polyester powdercoat paint finish, surpassing the rigorous demands of the outdoor environment. A variety of standard colors available. Machined natural brass or stainless steel trim rings are unpainted to reveal the natural beauty of the material and are available in either round or square forms (for square, specify option -SQ). Brass will patina naturally over time.
C ... LensDomed 1/2" thick tempered glass lens, factory sealed with high temperature adhesive to prevent water intrusion. Suitable for drive-over applications to 5000 lbs. when -DSB option is specified. An internal temperature reduction lens is available to reduce outer lens temperatures even further (specify option -TRL).
D ... HardwareStainless steel hardware is standard to provide maximum corrosion-resistance. Outer trim ring includes captive fasteners.
E ... SocketT4.5: Ceramic socket with 250° C Teflon® coated lead wires and G8.5 bi-pin base. T6: Ceramic socket with 250° C Teflon® coated lead wires and G12 bi-pin base. E17 & ED17: Ceramic socket with 250° C Teflon® coated lead wires and medium base.TTT: High temperature plastic socket with 250° C Teflon® coated lead wires and GX24 base.
F ... ElectricalFixture includes integral core & coil ballast assembly (120/208/240/277/347V). Rated for minimum -30° C starting temperature. Ballast assembly is encapsulated in UL-approved waterproof potting material. Electronic ballasts are also available (specify option EL). Core and coil ballasts for 150W & 175W are no longer available, and must now be specified with electronic ballasts only (specify electronic option - EL).
G ... ReflectorReflector is constructed from spun aluminum, clear anodized with Alzak® finish.
H ... LampIncluded as standard. Lamp is factory-installed in sealed lamp module.
I ... Labels & ApprovalsUL and cUL listed, standard wet label. IP68 rated. Manufactured to ISO 9001-2000 Quality Systems Standard. IBEW union made.
J ... WarrantyLumière warrants its fixtures against defects in materials & workmanship for three (3) years. Auxiliary equipment such as transformers, ballasts and lamps carry the original manufacturer's warranty.
K ... Recessed HousingRecessed housing is available to ship in advance of complete fixture for rough-in purposes. Specify option -LBB and order separately recessed housing and accompanying components from below:
6000-BB recessed housing;
6000-CP order in conjuction w/recessed housing when CP option is selected;
6000-DSB order in conjuction w/recessed housing when DSB option is selected
MONACO
6000N
70W (max.) T4.5
Metal Halide
150W (max.) T6
Metal Halide
175W (max.) ED17
Metal Halide
150W (max.) E17
High Pressure Sodium
57W (max.) TTT
Compact Fluorescent
Inground
16-7/8"[429mm]
ø10"[254mm]
ø6-11/16"[170mm]
10"[254mm]
20"[508mm]
4-3/16"[106mm]
ø13-1/2"[343mm]
12-13/16"[325mm]
2-1/2"[64mm]
4-11/16"[119mm]
Monaco 6000N
IP68
LUMIERE ®
Lumiere • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 05/27/2009 3:35:19 PMSpecifications and Dimensions subject to change without notice. ADL041202
LAMP INFORMATION
6000NMONACO
ORDERING INFORMATION
6000N-MH39T6MFL-120--BK
6000N MH39T6 MFL 120 BK SG
Voltage
120 120V=
Accessories
SG Straight Glare Shield=
Distribution 1
MFL Medium Flood=
Series
6000N Non-Adjustable Uplight Monaco Inground
=
Finish
BK Black=Source
MH39T6 39W Metal Halide T6, G12 Base=
1 Compact Fluorescent available in MFL and WW distribution only.Notes:
* LLB Option - Order 6000-BB - Back Box (Recessed Housing).
* Lamp included - factory installed.
* Consult your Cooper Lighting representative for additional options and finishes.
Lamp ANSI Code Watts Lumens CRI °K Life (hrs.) Base Volts
MH39T4 M130 39 3300 81 3000 9000 G8.5 120-347MH70T4 M139 70 6400 83 3000 6000 G8.5 120-347MH39T6 M130PO-REMJ 39 3400 81 3000 12,000 G12 120-347MH70T6 M139PO-REMJ 70 6600 82 3000 12,000 G12 120-347MH150T6 M142PP-RENJ 150 14,000 85 3000 12,000 G12 120-347MH50 M148/M110 50 4250 82 3000 10,000 medium 120-347MH70 M143/M98 70 6200 82 3000 10,000 medium 120-347MH100 M140/M90 100 9300 85 3000 12,500 medium 120-347MH150 M102/M142 150 13,500 93 4200 9000 medium 120-347MH175 M57 175 13,500 65 4000 10,000 medium 120-347NOTE: Inferior quality lamps may adversely affect the performance of this product. Use only name brand lamps from reputable lamp manufacturers.
CF26 60901-IEC-3426-1 26 1710 82 3000 12000 GX24q-3 120-347CF32 60901-IEC-7432-2 32 2200 82 3000 12000 GX24q-3 120-347CF42 60901-IEC-7442-2 42 3200 82 3000 12000 GX24q-4 120-347CF57 60901-IEC-7457-1 57 4300 82 3000 12000 GX24q-5 120-347HPS35 S76 35 2250 22 1900 16000 medium 120-347HPS50 S68 50 4000 22 1900 24000 medium 120-347HPS70 S62 70 6400 22 1900 24000 medium 120-347HPS100 S54 100 9500 22 2000 24000 medium 120-347HPS150 S55 150 16000 22 2000 24000 medium 120-347
NOTE: MH150T6, MH150 & MH175 are only available with electronic ballasts (-EL)
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
01/11/2010 11:53:41 AMConsult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice. ADY050164
DESCRIPTION
- Extruded aluminum housing - Die-cast aluminum end caps- Integrated visor option - solid. perf or opal window- Die-formed 94% reflective dual-finish anodized aluminum reflector- Electrostatically applied polyester powder coat paint finish- Gasketed hinging doorframe- PointGrab - adjustment
ConstructionHousing is 6063 aluminum extrusions with die-cast aluminum end caps without exposed fasteners. Hinging doorframe for easy access to gasketed lamp compartment, and stainless steel hardware. Optional integrated extruded aluminum cutoff visor.
ReflectorDie-formed 94% reflective dual-finish anodized aluminum.
AimingPointGrab adjustable and lockable aiming system is preset at the factory (25 degrees max. cp. above horizontal). Additional 10-degree indicator marks allow for precise adjustments.
LensClear tempered glass, micro-prismatic tempered glass or optional U.V. glass.
ElectricalUse 90-degree supply wire. Tungsten - Mini Candela, Metal Halide - G12 and Fluorescent - GX24q. Ballast (provided) and indoor ballast enclosure (provided) are remote mounted. Consult factory for remote mounted outdoor ballast enclosures, which are required for installation outdoors or for installation in natatoriums. See technical section for remote distances. Do not use with 4K (942 Series) or Osram Powerball Lamps.
MountingStandard canopy mounts over recessed junction box (by others). Support structure by others.
FinishLuminaire housing is finished using electrostatically applied polyester powder coat paint. Consult factory for custom colors.
LabelsUL and CUL listed for damp locations.
C-SCROLL
Small
SUSPENDED
ORDERING INFORMATION
SS-SI-P-1-E-070-120-C-PP30
SS SI P 1 E 070 120 C PP30
Mounting
PP30 Pendant 30" / Remote=
Wattage
070 70W=
Voltage
120 120V=
Number of Lamps
1 1 Lamp=
Size - In/Outdoor
SI Small Indoor=
Product
SS C-Scroll Solid Visor=
Lamp Type
E Metal Halide - Electronic=
Finish
C Custom Color=
Lens
P Micro-Prismatic=
SpecifyLength
(Consult factoryfor maximum length)
See Lamp Chart
LAMP CHART
LAMP SOURCE(NO. OF LAMPS) /
WATTAGE ENVELOPE BASEHOUSING LENGTH
"4/3-01naC iniM4T001 )1(netsgnuT
(1) 150 / 250 T4 Mini Can 13"
Electronic Metal Halide (1) 39 T6 G12 10-3/4"
* (1) 39 w/ QRS T6 G12 13"
* (1) 70 / 150 T6 G12 13"
Compact Fluorescent (1) 26 / 32 / 42 Triple Tube GX24q 13"
* Optional 75W / T4 / Mini Can quartz restrike (QRS) available with this source for 120V only
AMETRIX
FEATURES
page 56 www.ocl.com
WING™ SCONCE
WW1-S1SA-12-GW-BAL WW2-S1SA-12-GW-SGP
• The Wing sconce features a 0.125” thick laser-cut and formed aluminum frame.
• Decorative frame available with straight or curved edges.
• 3/16” thick extruded virgin white acrylic diffuser is UV stable and UL-94 HB Flame Class rated.
• Faux acrylic is thermally formed and colors are mixed completely through to avoid noticeable fading.
• OCL metal finishes are applied by hand and receive a protective clear coat lacquer.
• 21 standard powder coat paints offered, however all RAL colors available.
• Fixture offered with a variety of compact fluorescent and incandescent optic packages.
• Contact factory for additional modifications or options.
12” 12”
10” 10”4” 4”FIXTURE WEIGHT 5 LBS FIXTURE WEIGHT 5 LBS
SERIES HANGING SYSTEM SIZE DIFFUSER FINISH LAMPING (PHOTOMETRIC TEST #) VOLTAGE OPTIONS
SPECIFY CATALOG CODE
SC
ON
CE
– – – – – – –____________ ___________________ ____ _____________ _____________ _______________ ____ ___________________________
page 57Phone: 314.863.1895 | Fax: 314.863.3278 | www.ocl.com
PHOTOMETRIC INFORMATION AVAILABLE AT WWW.OCL.COM
FOR ADDITIONAL INFORMATION GO TO WWW.OCL.COM AND SEARCH: WING SCONCE
SAMPLE CODE: WW2–S1SA–12–GW-SGP–1QD26–120–ULD
GW GLOSS WHITE ACRYLIC
MW MATTE WHITE ACRYLIC
FA FAUX ALABASTER ACRYLIC
NH NATURAL HORN ACRYLIC
ET ETRUSCAN ACRYLIC
WS WHITE SWIRL ACRYLIC
PAL POLISHED ALUMINUM
BAL BRUSHED ALUMINUM
PTD PAINTED – SPECIFY CODE (EX. BKP FOR BLACK PAINT, SEE PAGE 492 FOR PAINT OPTIONS)
12 120
277
347
12”
2QD13 2@13W QD
1QD26 1@26W QD (13785.0)
2IN40 2@40W IN
DMA ADVANCE® DIMMING BALLAST
DML LUTRON® DIMMING BALLAST
EMR REMOTE MOUNT EMERGENCY
FUS FUSED
ULD UL DAMP LABEL
• Fixture mounts to a standard 4” J-box (supplied by others).
• Bodine® emergency ballast available, standard with remote mounted test switch and indicator light.
• Advance® and Lutron® dimming ballasts available. Controls not included.
• Integral HPF electronic fluorescent ballast with Class A sound rating (3-5 year ballast warranty depending on ballast specification).
• Fixture is ADA compliant.
• For photometric data, please visit www.ocl.com.
• For lamp and base information, see pages 496-505 in the reference section.
• For specific mounting instructions, please contact factory.
• Five year product warranty.
WW1
WW2
S1SA INDOOR ADA COMPLIANT SCONCE