keep your idlers clean with rotorepeltm rx release coatings
TRANSCRIPT
— Increase press run time and reduce scrap
— Reduces the need to stop production for idler cleaning
— Dramatically reduces adhesive build-up
— Reduces ink picking with a micro-grooved surface
— US FDA compliant; safe for intended use
— Ideal for low abrasion materials
— Applied in-house, adds no lead time
— Heat tolerance to 204°C (400°F) environments
— When needed, easily clean coating with common solvents, including alcohol, acetone, and citrus-based cleaners*
Materials Available for Coatings:AluminumSteelStainless Steel
Roll Face Finishes:Microgrooved recommended, smooth avai lable Not avai lable on deep grooved rol l faces
Coating Life:Coating l i fe depends on material abrasion Lower abrasion wil l lead to longer l i fe
Key Features& GeneralSpecifications
iner t ia than standard aluminum idlers. Our patented WINer tia ultra low-drag bearings wil l last longer with misal ignment and thermal expansion capabil i t ies. Webex idlers are produced in our ISO 9001 faci l i ty and are known the world over for their qual ity and rel iabi l i ty.
Our proven RotoRepelTM Rx coating, the award-winning release coating from RotoMetrics, is now avai lable on both Webex and Componex idler rol ls. Run even faster with dramatical ly less adhesive bui ldup and ink picking, al l whi le greatly reducing press downtime for rol l cleaning. In addit ion to the nonstick benefits of the coating, RotoRepel Rx is FDA compliant for intended use, meaning it is safe to use in del icate healthcare and food packaging applications. Best of al l , RotoRepel Rx coatings are appl ied in-house and do not add any lead t ime to your order. RotoRepel Rx coatings can be applied to Componex WINer tia™ ST (smooth tubing) aluminum idler rol lers, as well as Webex aluminum, steel , and stainless steel idler rol lers. WINer tia ST rol lers have up to 30% less rotational
Keep Your Idlers Clean with RotoRepelTM Rx Release Coatings
RotoRepelTM Rx Release Coatings for Precision IdlersR OT O M E T R I C S
*Note: Do not use cleaners with pH above 10, or any abrasive cleaners, including magic erasers
© Copyright Maxcess 2021
P +86-756-881-9398F [email protected]
maxcessintl.com.cn
A S I APA C I F I C
P +49-6195-7002-0F [email protected]
maxcess.eu
E U R O P E& M I D D L E E A S T
P +1-844-MAXCESSF [email protected]
maxcessintl.com
G LO B A L H E A D Q U A RT E R S& A M E R I C A S RELATED PRODUCTS
ASK US ABOUT:
Cygnus Tension Controller
FIFE-500 Web Guiding System
WINertiaTM Product Features
WINertia™ Tubing
Our extruded aluminum profi les match each idler appl ication and are designed to maximize strength and minimize rotational iner t ia. In addit ion, the tube ID matches the bearing OD and includes bui lt - in balancing chambers. Avai lable from 2-10 inch outside diameters and 4-160 inch rol l face.
WINertia™ Self-Adjusting Bearings
WINertia™ Self-Adjusting Bearings al ign both radial ly and l inearly to protect against thermal expansion, excess shaft deflection, misal igned rol lers, and skewed side frames. WINer tia™ Self-Adjusting Bearings al low for optimal production speeds and more machine uptime.
Dynamic Center-WIN Balancing
Balancing weights are placed at the center of the rol l and are locked into the balancing chambers by design, ensuring they cannot fal l out. By balancing across the entire face of the rol l , you wil l see a reduction in whip and vibration. Our dynamic balancing spec is ISO 1940 G6.3 at 2000 FPM.