katalog vs-englisch
TRANSCRIPT
-
7/31/2019 Katalog VS-englisch
1/36
Aluminium
Loading ramps
-
7/31/2019 Katalog VS-englisch
2/36
2
ALTEC GmbH Singen.
All Altec products are made toEuropean standards. However,please note, loading ramps arenot covered by CE regulationsand should not show CEcertification.
ALTEC G MBHAn innovative company froman innovative country.
Altec is a well established,medium sized manufacturingcompany situated in the southof Baden Wurttemberg close toLake Konstanz and the Swissborder.A perfect environment to putideas in action.
For every loading situationthere is a correct solution.Only Altec have a productrange wide enough to suit mostapplications. If you cant findwhat you need we will designand manufacture the bestsolution for you.
At Altec we believe the mostimportant factors areexperience, cost and safety. Allof our products are certifiedand agree with the rules laiddown by our chamber ofcommerce.
Altec loading ramps in manufacture.In the background is our automatic storage and selection system.Also shown is our capacity testing apparatus which is used aspart of our in house quality control system.
The capacities shown in thisbrochure are calculated for twoaxle vehicles with a weightdistribution of 40% to 60%.For single axle vehicles thecapacity is reduced to 60% ofthat shown.
All capacities are calculatedwith a safety factor of 2.1.
From design to production weoffer top quality, made inGermany!
-
7/31/2019 Katalog VS-englisch
3/36
IndexType AOSup to 2300 kgspage 6/7
Type ABSup to 600 kgspage 8
Ramps forsack truckspage 9
Type AVS 80/100up to 4000 kgspage 10/11
Type AVS 130/150up to 7300 kgspage 12/13
Springsystem forrampspage 22/23
Type AVS 170/200up to 11250 kgspage 14/15
For steel trackstype AVS150/170/200page 16/17
Type VFR 185up to 80 tonnespage 20
Type VFR 120/134up to 32 tonnespage 18/19
VFR wedgepage 21
Type RRKpage 24/25
Type RRDrotatablepage 26
Maintenancerampspage 27
Tailgatetype RWB/RPBpage 30/31
Type LBpage 28/29
Technical detailsexample of usepage 32-35
-
7/31/2019 Katalog VS-englisch
4/36
-
7/31/2019 Katalog VS-englisch
5/36
-
7/31/2019 Katalog VS-englisch
6/36
6
1680
1060
450
600
1500
2000
2500
3000
3500
4000
2500
1500
2000
3000
3500
1500
2000
2500
3000
1500
2000
09
11
400
310
0750
900
600
07
8
870
550
0450
081.01.037
13
19770750
600
900
1050 1090
1480750
900
600
510
890
3500
3000
2500
081.01.008
081.01.009
081.01.010
081.01.011081.01.020
081.01.021
081.01.022
081.01.023
081.01.024
081.01.026
081.01.027
081.01.028
081.01.029
081.01.030
081.01.031
081.01.035
081.01.036
081.01.038
081.01.039
081.01.041
081.01.042
081.01.043
081.01.044
081.01.045
081.01.046
10
12
14
16
18
14
17
21
25
29
32
16
22
25
17
21
26
30
35
39
1500
2000
2500
3500
3000
4000
1340
650
410
1920
1620
1330
930
600
490
2390
2020
1850
17501530
1290
450
0750
1050
450
600
900
1200
900
1050
450
750
1050
1200
60
60
400 (+15)
400 (+15)
400 (+15)
400 (+15)
400 (+15)
400 (+15)
400 (+15)
400 (+15)
400 (+15)
400 (+15)
400 (+15)
200 (+15)
200 (+15)
200 (+15)
200 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
300 (+15)
70
70
70
70
70
70
60
60
60
60
60
60
60
60
60
70
70
70
60
70
60
60
60
60
70
70
1500
2000
2000
2500
31
38
1210
1100
600
750
600
19
23
1230
870
450
750
450
1170
1520
2500
081.01.047
081.01.048
081.01.050
081.01.051
081.01.052
081.01.053
081.01.054
081.01.055
081.01.056
44
32
41
50
59
3000
1500
2000
3000
1040
1280
1110
900
600
900
600 (+15)
600 (+15)
600 (+15)
600 (+15)
800 (+15)
600 (+15)
800 (+15)
800 (+15)
800 (+15)
60
60
70
70
70
70
70
70
70
2000
2500
3000
2000
11
12
300
650
900
600
750
8
9
500
400
600
900 400
081.55.009
081.55.010
081.55.011
081.55.021
081.55.022
081.55.023
14
16
2500
3000
500750
200 (+15)
200 (+15)
200 (+15)
300 (+15)
300 (+15)
300 (+15)
940
1185
1430
940
1185
1430
1105
1350
1595
1105
1350
1595
Type AOS
Small wheeled equipment such as trolleys, pallet truk-ks etc. are involved in many thousand of loading andunloading operations everyday.The aluminium profileused in the manufacture of AOS ramps is perfect forthis type of equipment due to its perforated hi-gripanti-slip surface. The perforations allowing water and
snow to drain very easily from the running surface,providing excellent traction for both pedestrians andequipment whatever the weather.AOS ramps are not fitted with safety curbs as stan-dard, but they can be fitted as an option.They are alsoavailable in a folding version.
Length
mm
Width
mm
Thickness
mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 1,0 m
Weight
(kgs/ea)
Length
mm
Width
mm
Thickness
mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 1,0 m
Weight
(kgs/ea)
Length
mm
Width
mmL 1 L 2
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 1,0 m
Weight
(kgs/ea)
Foldable version
Other dimensions on request
-
7/31/2019 Katalog VS-englisch
7/36
7
B
H 40 mm
B
B
H 40 mm
L 1
B
L
L 2
Construction:AOS ramps have been designed to provide the maximumload capacity in their range, with the slimmest of profilesand with the lowest possible unit weight in maintenancefree aluminium.The standard AOS design includes inte-gral reinforcement.The slim design of the bottom sectionof AOS ramps which comes into contact with the ground,ensures a smooth transition from the horizontal surface tothe ramp running surface with a maximum 5mm step.
without curbs standard
curbs on both sides on request
curb on one side on request
lip support standard
hooked lip on request
hinged fitted on request
folding option
dimensions see page 32
-
7/31/2019 Katalog VS-englisch
8/36
8
L
H
150150
235
47
1000
1500
2000
2500
ABS 01
ABS 02
500
400
600
750
8
10
700
6
ABS 04
ABS 05600
300
450
5 082.00.004
082.00.005
082.00.001
082.00.002
082.00.003ABS 033000 350 900 12
150
150
150
150
150
235
235
235
235
235
2000
2500
3000 1450300 900 13
400
11
950
1400
900
1200 1150350
600
750
9 082.55.001
082.55.002
082.55.003
150
150
150
235
235
235
Type ABS
This aluminium ramp offers an excellent balance between a very
low weight and a high load capacity. Robust and easy to handle,they are engineered to take up to 400 kg a pair with a maximumheight difference of 900 mm.These ramps are fabricated from anextruded profile which is cut to length and angled as required.With an internal width of 150mm, and an overall width of 235 mm,these ramps are ideal for loading/unloading items such as motor-bikes, high pressure cleaners, generator sets, wheelchairs etcTheir profile allows them to be stacked one inside the other forease of storage, and the 45 mm high safety curbs on each sideprevent any lateral slippage.
Type ABSfolding
Length
mm
Internal width
mm
External width
mm
Order codeCapacity(kgs/pair)
axle distance 1,0 m
Weight
(kgs/ea)
Bed Height30 % gradient
mm
Type
Length
mm
Internal width
mm
External width
mm
Order codeCapacity(kgs/pair)
axle distance 1,0 m
Weight
(kgs/ea)
Bed Height30 % gradient
mm
Dimension
Other dimensions on request
A foldable option is also available.
L 1 L2
-
7/31/2019 Katalog VS-englisch
9/36
9
3000
3900
29
36
350
500 1170
900 080.00.050
110.00.050
080.01.050
110.01.050
540
540
600 (+20)
600 (+20)
3000
4000 350
63
80
900
1170
400 081.00.001
081.00.002
900
900
920 (+15)
920 (+15)
L
B
600 mm
80/110
600 mm
80/110
540 mm25
Ramps forsack trucks
Length
mm
Internal width
mm
External width
mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 1.0 m
Weight
(kgs/ea) without curbs with curbs
Length
mm
Internal width
mm
External width
mm
Order codeCapacity(kgs/pair)
axle distance 1,0 m
Bed Height30 % gradient
mm
Weight
(kgs/ea)
Eventramp
This type of ramp is mainly used for sack trucks withpneumatic tyres.Removal firms, furniture companies or beverage carriersare the main users of this lightweight, nonslip loading ramp
The event ramp has been designed especiallyfor the loading of trolleys or cases with small wheels.Probably used by musicians, event engineers orthose loading flight cases.
KVS coating surface ensures minimal vibration.
Other dimensions on request
Options include a moveablelip and foldable versions.
-
7/31/2019 Katalog VS-englisch
10/36
10
1620
1980
2340
3240
14
19
1660
1000
720
950
10
12
2630
2150 590
500 080.00.000
080.00.002
080.00.005
080.00.010
080.00.015
080.01.000
080.01.002
080.01.005
080.01.010
080.01.015233960 750 1175
245
245
245
245
245
305 (+20)
305 (+20)
305 (+20)
305 (+20)
305 (+20)
A
80
80
25
A
25
B
80
B
B
Type AVS 80up to 2620 kgs/pair
Length
mm
Internal width
(A) mm
External width
(B) mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 1,5 m
Weight
(kgs/ea) no curbs with curbs
Other dimensions on request
These ramps are ideal for loading smaller rubber track andpneumatic tyre vehicles.The surface profile is extruded from a high quality aluminiumalloy which guarantees longevity even with constant use.As with all AVS ramps, these are available with or withoutcurbs or with curbs on one side only.
dimensions see page 32
without curbs standard
curbs on both sides standard
curbs on one side on request
lip support standard
hooked lip on request
hinged fitted on request
-
7/31/2019 Katalog VS-englisch
11/36
11
1610
1970
2330
3230
17
23
2800
1810
720
950
13
15
4050
3310 590
500 110.00.000
110.00.002
110.00.005
110.00.010
110.00.015
110.01.000
110.01.002
110.01.005
110.01.010
110.01.015273950 1360 1175
245
245
245
245
245
305 (+20)
305 (+20)
305 (+20)
305 (+20)
305 (+20)
4670
1610
1970
2330
17
20
3310
2800
590
720
31
15
1090
4050 500
1400 110.00.000
110.00.024
110.00.026
110.00.029
110.00.034
110.01.020
110.01.024
110.01.026
110.01.029
110.01.034263230 1810 950
245
340
340
340
340
305 (+20)
400 (+20)
400 (+20)
400 (+20)
3950 311360 1175 110.00.039110.01.039340 400 (+20)
400 (+20)
110
A
30
B
110
A
30
B
110
B
Made for loading rubber track and pneumatic tyre plant theAVS 110 is an ideal ramp for use with most plant trailers and3,5 tonne trucks.The robust surface ensures minimal wear even with constantuse.Curb and folding options are also available.
Other dimensions on request
Length
mm
Internal width
(A) mm
External width
(B) mm
Order codeBed Height30 % gradient
mm
capacity(kgs/pair)
axle distance 1,5 m
Weight
(kgs/ea) no curbs with curbs
Type AVS 110up to 4050 kgs/pair
dimensions see page 32
without curbs standard
curbs on both sides standard
curbs on one side on request
lip support standard
hooked lip on request
hinged fitted on request
-
7/31/2019 Katalog VS-englisch
12/36
2510
3050
3590
4130
35
40
3470
2860
1080
1240
26
31
5150
4390 915
750 130.00.003
130.00.006
130.00.009
130.00.012
130.00.015
130.01.003
130.01.006
130.01.009
130.01.012
130.01.015454670 2430 1400
325
325
325
325
325
405 (+20)
405 (+20)
405 (+20)
405 (+20)
405 (+20)
5210 502120 1560 130.00.018130.01.028325 405 (+20)
12
130
A
30
B
130
A
30
B
130
B
Type AVS 130up 5150 kgs/pair
Other dimensions on request
Made for loading rubber track and pneumatic tyre plant theAVS 130 is an ideal ramp for use with most large planttrailers and 7.5 tonne trucks.The robust surface ensures minimal wear even withconstant use.Curb and folding options are also available.
All loading ramps are available in a folding version.
Length
mm
Internal width
(A) mm
External width
(B) mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 1,5 m
weight
(kgs/ea) no curbs with curbs
Drop bolts supplied asstandard.
dimensions see page 32
without curbs standard
curbs on both sides standard
curbs on one side on request
lip support standard
hooked lip on request
hinged fitted on request
-
7/31/2019 Katalog VS-englisch
13/36
2640
3040
3640
4040
48
53
5400
4610
1090
1210
36
41
7840
6810 910
790 150.00.002
150.00.004
150.00.007
150.00.009
150.00.011
150.01.002
150.01.004
150.01.007
150.01.009
150.01.011584440 4010 1330
360
360
360
360
360
460 (+20)
460 (+20)
460 (+20)
460 (+20)
460 (+20)
5040 653350
5250
4470
7350
6380
3890
3260 1510 150.00.014150.01.014360 460 (+20)
13
150
A
35
B
150
A
35
B
150
B
Made for loading mid range to heavy equipment the AVS 150has a larger and wider track than its smaller cousins.Folding and curb options are available.Although still very light weight, given the capacities offered,we are able to offer spring assistance when used with thehinged option.
(shown on page 22)
Length
mm
Internal width
(A) mm
External width
(B) mm
Order codeBed Height30 % gradient
mm
Capacity (kgs/pair)axle distance 2,0 m
Weight
(kgs/ea) no curbs with curbsno curbs with curbs
Other dimensions on request
Type AVS 150up to 7350 kgs/pair
dimensionssee page 32
without curbs standard
curbs on both sides standard
curbs on one side on request
lip support standard
hooked lip on request
hooked lip on request
hinged fitted on request
-
7/31/2019 Katalog VS-englisch
14/36
14
2840
3240
3840
4240
54
58
5790
5250
1150
1270
41
46
7840
6870 970
850 170.00.003
170.00.005
170.00.008
170.00.010
170.00.012
170.01.003
170.01.005
170.01.008
170.01.010
170.01.012644640 4790 1390
400
400
400
400
400
520 (+20)
520 (+20)
520 (+20)
520 (+20)
520 (+20)
5240 714250
5320
4590
7990
6970
4030
3400 1570 170.00.015170.01.015400 520 (+20)
500 (+20)
500 (+20)
500 (+20)
500 (+20)
500 (+20)
170.00.016170.01.016745440 4090 1645400 520 (+20) 3230500 (+20)
500 (+20)
170
A
50
B
170
A
50
B
170
B
Type AVS 170up to 8270 kgs/pair
Other dimensions on request
Made for loading mid range to heavy equipment the AVS 170Has a larger and wider track than its smaller cousins.Although capacities are not much greater than the AVS 150the extra width is useful for wider track or tyre vehicles.Folding, curb and spring assistance options are available.
(shown on page 22)
As an option these ramps can be supplied hinged, foldableand with a spring system.
Lengthmm
Internalwidth (A)mm
External width (B)mm Order codeBed Height30 % gradient
mm
Capacity (kgs/pair)axle distance 2,0 m
Weight(kgs/ea) no curbs with curbsno curbs with curbsno curbs with curbs
dimensionssee page 32
without curbs standard
curbs on both sides standard
curbs on one side on request
lip support standard
hooked lip on request
hooked lip on request
hinged fitted on request
-
7/31/2019 Katalog VS-englisch
15/36
15
2840
3440
4240
4440
85
89
8500
7950
1270
1330
59
70
11240
11180 1030
850 200.00.003
200.00.006
200.00.010
200.00.011
200.00.014
200.01.003
200.01.006
200.01.010
200.01.011
200.01.0141005040 6650 1510
450
450
450
450
450
580 (+20)
580 (+20)
580 (+20)
580 (+20)
580 (+20)
5240 1046310 1570 200.00.015200.01.015450 580 (+20)
200
A
65
B
200
A
65
B
200
B
Type AVS 200up to 11250 kgs/pair
Other dimensions on request
The biggest and strongest of the AVS ramps and ideal forloading large excavators and tractors.They also make usefulyard ramps for unloading containers.As with all AVS ramps, the high quality alloy used ensuresthat these ramps will last for years even with constant use.Folding, curb and spring assistance options are available.
(shown on page 22)
Length
mm
Internal width
(A) mm
External width
(B) mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 2,0 m
Weight
(kgs/ea) no curbs with curbs
All ramps are fitted with a reinforced surface, suitable forvehicles with rubber tracks.
dimensionssee page 32
without curbs standard
curbs on both sides standard
curbs on one side on request
lip support standard
hooked lip on request
hooked lip on request
hinged fitted on request
-
7/31/2019 Katalog VS-englisch
16/36
16
2640
3040
3640
4040
57
64
5200
4400
1090
1210
44
49
7300
6300 910
790 150.10.002
150.10.004
150.10.007
150.10.009
150.10.011
150.11.002
150.11.004
150.11.007
150.11.009
150.11.011704440 3800 1330
400
400
400
400
400
500 (+20)
500 (+20)
500 (+20)
500 (+20)
500 (+20)
5040 793250 1510 150.10.014150.11.014400 500 (+20)
2840
3240
3840
4240
68
73
5300
4600
1150
1270
51
58
8000
6900 970
850 170.10.003
170.10.005
170.10.008
170.10.010
170.10.012
170.11.003
170.11.005
170.11.008
170.11.010
170.11.012814640 4000 1390
400
400
400
400
400
520 (+20)
520 (+20)
520 (+20)
520 (+20)
520 (+20)
5240 903400 1570 170.10.015170.11.015400 520 (+20)
500 (+20)
500 (+20)
500 (+20)
500 (+20)
500 (+20)
170.10.016170.11.016945440 3200 1645400 520 (+20) 500 (+20)
500 (+20)
2840
3440
4240
4440
95
100
8200
7700
1270
1330
65
78
8500
8500 1030
850 200.10.003
200.10.006
200.10.010
200.10.011
200.10.014
200.11.003
200.11.006
200.11.010
200.11.011
200.11.0141105040 6400 1510
450
450
450
450
450
580 (+20)
580 (+20)
580 (+20)
580 (+20)
580 (+20)
5240 1156100 1570 200.10.015200.11.015450 580 (+20)
AB
AB
B
Type AVSfor steel tracked vehicles up to 8500 kgs/pair
Other dimensions on request
These ramps are designed for use by all equipment including steel tracked vehicles.The ramps can be supplied with or withoutsafety curbs.The running surface has been engineered with steel tracked equipment in mind, and is of a much harder wearingand heavier construction than the standard design. As an option these ramps can be supplied hinged, foldable, and with or wi-thout springing to balance the weight of the ramps.
Special steel track preparation giving grip without scabbling.
Length
mm
Internal width
(A) mm
External width
(B) mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 2,0 m
Weight
(kgs/ea) no curbs with curbs
Length
mm
Internalwidth
(A) mm
External width (B)mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 2,0 m
Weight
(kgs/ea) no curbs with curbsno curbs with curbs
Length
mm
Internal width
(A) mm
External width
(B) mm
Order codeBed Height30 % gradient
mm
Capacity(kgs/pair)
axle distance 2,0 m
Weight
(kgs/ea) no curbs with curbs
Type AVS 200
Type AVS 170
Type AVS 150
dimensionssee page 32
without curbs standard
curbs on both sides standard
curbs on one side on request
lip support standard
hooked lip on request
hooked lip on request
hinged fitted on request
-
7/31/2019 Katalog VS-englisch
17/36
17
-
7/31/2019 Katalog VS-englisch
18/36
18
120.00.00122750 10820 600450 (+20)
3000
2000
2400
3000
3500
4000
50 120.01.000
120.01.001
120.01.002
120.01.003
120.01.004
120.01.005
51
59
71
81
90
10110
18960
15170
13000
10660
7370
9390
8300
7780
7430
120.00.000
120.00.002
120.00.003
120.00.004
120.00.005
900
720
900
1050
1200
400 (+20)
450 (+20)
450 (+20)
450 (+20)
450 (+20)
400
420
450
470
156
Length L(mm)
Width B(mm)
Capacity (kgs/pair)axle distance 2,0 m
drawing A drawing B
Weight(kgs/ea)
Order code
drawing A drawing B
VFR guide rail, length 2600 mm, black order code 134.22.000; galvanised order-code 134.22.001
These ramps are for use by machines equipped with pneu-matic tyres, solid wheels, and rubber or steel tracks. Theyuse a special aluminium construction for strength, durabilityand weather-resistance.These ramps can be supplied witha hinged end, or with a hook, which fits into a guide rail.
As an option, the ramps can befitted with a spring system.
Bed Height30 % gradient
mm
Other dimensions on request
drawing A
drawing B
Typ VFR 120up to 22700 kgs/pair
dimensionssee page 32
-
7/31/2019 Katalog VS-englisch
19/36
19
134.04.001840 20000450 (+20)
2400
2800
3000
2400
2800
3000
076 134.00.000
134.00.001
134.00.007
134.00.002
134.00.003
134.00.004
86
091
104
114
118
900
720
840
900
134.04.000
134.04.007
134.04.002
134.04.003
134.04.004
24000
18000
32000
26000
22000
450 (+20)
450 (+20)
600 (+20)
600 (+20)
600 (+20)
450
470
600
620
182
720
Type VFR 134up to 32000 kgs/pair
Length L(mm)
Width B(mm)
Capacity(kgs/pair)
axle distance 2,0 m
Bed Height30 % gradient
mm
Weight(kgs/ea)
Order code
drawing A drawing B
VFR guide rail, length 2600 mm, black order-code 134.22.000; galvanised order-code134.22.001
The heavy duty profile and high grade aluminium used in ourVFR 134 ramps ensures durability even when loading steeltrack machinery.These ramps are available with a hook on option or hinged totake a 60 mm bright steel bar.For heavier hinged ramps we recommend our spring counter-balance system.
drawing A
drawing B
Other dimensions on request.
-
7/31/2019 Katalog VS-englisch
20/36
20
606
Our extra heavy duty profilesenable us to produce specialramps with capacities up to80,000 kgs.
These profiles have beendesigned specifically for us tooffer design solutions for lowloader manufacturers.
Cross-section VFR 185
Hooked version
Various applications for lowloader
Ramp in two parts withpedestal
Type VFR 185up to 80000 kgs/pair
-
7/31/2019 Katalog VS-englisch
21/36
21
1450 350
450
600
690
134.80.000
134.80.001
134.80.002
30000
35000
50000
070
92
110
350
350
1450
1450
H
L
HL1
L2
B
B + 20
B
B + 20
Type VFR wheel rampsup to 50000 kgs/pair
Length L
(mm)Width B(mm)
Capacity
(kgs/pair)
Weight
(kgs/ea)
Bed Height30 % gradient
mm
Order code
drawing E
Models, shown in drawing F, on request.
These ramps are used mainly on trailers and low loaders. Theprofile used in the construction of these ramps maximises itsdimensions and load bearing capacity. These ramps are foruse by machines with pneumatic tyres, solid wheels, and rub-ber or steel tracks.
drawing E
drawing F
They use a special aluminium
construction for strength,durability and weather-resistance.These ramps canbe supplied with a hingedend, or as a foldable version(spring counterbalancing isalso an option).For ease of handling, severalunits can be positioned adja-cent to each other.The heightdifference, dimension H, isrequired.
-
7/31/2019 Katalog VS-englisch
22/36
22
Spring systemfor ramps
With the optional spring system, the ramp typesAVS 150, 170, 200, VFR 120/134 are easilyplaced into position by one person.
Order code Model Weight (kgs/ea)
134.00.901 Spring system for width 450 mm lateral movement 920 mm 82
134.00.902 Spring system for width 600 mm lateral movement 1010 mm 82
-
7/31/2019 Katalog VS-englisch
23/36
23
+ 90
920/1010
Easy handling!
Our counterbalance system allows heavy loading ramps to bepositioned by one person.
Spring system for rampsVFR Loading ramp, foldable incl. spring system.In case of order, dimension H is required.
steel bar 60
-
7/31/2019 Katalog VS-englisch
24/36
24
21
1200
800
1000
37 081.01.102
081.01.103
081.01.104
081.01.105
081.01.106
081.01.107
081.01.108
081.01.109
081.01.110
081.01.111
081.01.112
081.01.100
081.01.101
081.01.114
081.01.115
081.01.116081.01.117
081.01.118
081.01.119
081.01.120
081.01.121
43
39
46
41
50
44
53
64
46
56
51
60
72
53
6373
56
66
58
68
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450450
430
430
400
400
RRK 02
RRK 03
RRK 04
RRK 05
RRK 06
RRK 07
RRK 08
RRK 09
RRK 10
RRK 11
RRK 12
RRK 00
RRK 01
RRK 14
RRK 15
RRK 16RRK 17
RRK 18
RRK 19
RRK 20
RRK 21
0800
1000
0800
1000
1000
0800
1000
1200
800
1000
0800
10001200
800
1000
800
1000
0800
1250
1250
1250
0800
800
0875
875
980
1045
1045
1045
1150
1150
1360
13601360
1465
1465
1570
1570
980
400
400
400
0220
220
0240
240
285
0310
310
0310
355
355
0440
4400440
485
485
530
530
0285
640
640
640
0340
340
0380
380
460
0500
500
0500
570
570
0700
7000700
760
760
840
840
0460
100
100
100
95
95
100
100
100
100
100
100
100
100
100
100100
100
100
100
110
100
290
290
290
285
285
290
290
290
290
290
290
290
290
290
290290
290
290
290
300
290
2400
2400
2400
1400
1400
1600
1600
1800
2000
2000
2000
2200
2200
2600
26002600
2800
2800
3000
3000
1800
3
geprfteSicherheit
4
Type RRK
Length L
(mm)Width B(mm)
Height H
(mm)
Capacity
(kgs/pair)
c(mm)
a(mm)
Height difference HD
min (21%) max (30%)
Weight
(kgs/ea)
Type Order code
Higher capacities and other dimensions on request.
1 Ramp in foldedposition
2 Easily manoeuvredby one person
3 Ramp beingunfolded
Construction:This aluminium ramp is designed for easy one man operation.The folding and unfolding of the ramp is made almost effort-less by the use of gas struts to balance the weight of theramp.The ramp surface is fabricated from extruded aluminiumprofiles which are perforated and embossed to give a perfect
anti-slip surface.This also allows rain and snow to dispersevery easily. The light weight of the ramp allows most of the payload of the vehicle to be retained.The RRK is held in thevertical position by two latches, mounting blocks are used tokeep the assembly rigid and prevent any vibration duringtransport.
Other advantages: Virtually maintenance free Fitted with 30 mm high safety curbs along both edges. Robust hinges (guaranteed for life).
Installation:The ramp is both removable and versatile, and can be
mounted on different vehicles of identical dimensions, eitheras a rear or side loading ramp. If the vehicle is to be used forother purposes, the ramp is easily dismounted by unscrewingthe thumb screws supplied.The ramps are supplied with acomplete mounting kit including a base plate, and a reinfor-cing counter plate.
4 Pedestal for weightsmore than 450 kp
-
7/31/2019 Katalog VS-englisch
25/36
25
5 6
B
B + 200
Ansicht X
H
50 min.265
90
40
HD
140 max. 160 a
c
L
85
X
5
6
Side mounting
Locking latch
view X
-
7/31/2019 Katalog VS-englisch
26/36
26
800
800
1000
37 081.01.302
081.01.303
081.01.304
081.01.305
081.01.306
081.01.307
081.01.308
081.01.309
081.01.311
081.01.312
081.01.300
081.01.301
081.01.315
081.01.316
081.01.318
43
39
46
41
50
44
53
46
56
51
60
53
63
56
450
450
450
450
450
450
450
450
450
450
450
450
450
450
430
RRD 02
RRD 03
RRD 04
RRD 05
RRD 06
RRD 07
RRD 08
RRD 09
RRD 11
RRD 12
RRD 00
RRD 01
RRD 15
RRD 16
RRD 18
0800
1000
0800
1000
1000
0800
1000
800
1000
1000
800
0800
1430
1325
1325
0865
865
0940
940
1045
1115
1115
1220
1220
1430
1535
1045
440
400
400
0220
220
0240
240
285
0310
310
355
355
440
485
0285
700
640
640
0340
340
0380
380
460
0500
500
570
570
700
760
0460
100
100
100
95
95
100
100
100
100
100
100
100
100
100
100
290
290
290
285
285
290
290
290
290
290
290
290
290
290
290
2600
2400
2400
1400
1400
1600
1600
1800
2000
2000
2200
2200
2600
2800
1800
Type RRDrotatable
The RRD is a logical development from the RRK.Basically the same ramp but with the facility to swivel backagainst the side panels of your van. An optional locking latchis available to keep the unit in the swivelled position.Perfect for parcel delivery firms.
Locking latch for fixing theramp inside.
The RRD can rotate insideand outside of the vehicle
Length L
(mm)Width B(mm)
Height H(mm)
Capacity
(kgs/pair)
c(mm)
a(mm)
Height difference HD
min (21%) max (30%)
Weight
(kgs/pair)
Type Order code
-
7/31/2019 Katalog VS-englisch
27/36
27
H
CE
B
A
1970
2330
2040
2440
700
700
400
600
7850
7850
500
500
400
600 2790
3310 140.01.100
140.01.101
140.01.102
140.01.103
14
18
19
23
17
20
29
33
340
340
360
360
400
400
460
460
Ideal for the maintenance of vehicles(inspection, cleaning etc.). These ramps are manufacturedmostly as required, and can be supplied with or withoutsafety curbs.
Maintenance ramps
Length A
(mm)
Width C
(mm)
Width E
(mm)
Order codeCapacity(kgs/pair)
axle distance 2,0 m
Hight H
(mm)
Dimension B
(mm)
Weightstand / ramp
kgs
-
7/31/2019 Katalog VS-englisch
28/36
28
L
15
25
42
32150
640
734
L15
25
50
625
735
Ramps for tail-lifts
Side ramps for tail-lifts and tail-boards.These ramps facilitatethe loading/unloading operations from vehicles alongside thekerb.They bring security and quicker unloading times for carrierswho have to deliver within a town centre using vehiclesequipped with hydraulic tail-lifts.
Removable model for fixing to an
aluminium rail integrated within the
tailboard. Includes wheel guides,
and safety curbs both sides.
A removable model for fixing to an
aluminium rail integrated within the
tailboard. No wheel guides. Safetycurbs on both sides.
Type LBGM
Type LBWM
Order code Model Length (L) Capacity Weight
mm kgs kgs
083.09.000 LBGM 1 1.980 600 13
083.09.001 LBGM 2 1.180 600 15
083.09.003 LBGM 4 1.480 600 18
083.09.002 LBGM 3 1.980 600 24
Order code Model Length (L) Capacity Weight
mm kgs kgs
083.10.000 LBWM 1 1.000 600 15
083.10.001 LBWM 2 1.200 600 18
083.10.002 LBWM 3 2.000 600 30
-
7/31/2019 Katalog VS-englisch
29/36
29
10L105
42
32
150
640
734
690
42
32150
640
734
710
50
625
735
690
10
30
L
105
15
150
L
65
Type LBKRemovable model with a horizontal
platform, galvanised hook fixing to
the tail-board through 12 x 40 mm
slots. Includes wheel guides, safety
curbs both sides, and adjustable
hooks.
Removable model galvanised hook
fixing to the tail-board through
12x40 mm slots. Includes wheel
guides, safety curbs both sides,
and adjustable hooks.
Removable model galvanised hook
fixing to the tail-board through
12x40 mm slots. Includes safetycurbs both sides, and adjustable
hooks.
No wheel guides.
Type LBG
Type LBW
Order code Model Length (L) Capacity Weight
mm kgs kgs
083.06.000 LBG 1 1.980 600 13
083.06.001 LBG 2 1.180 600 15
083.06.003 LBG 4 1.480 600 18
083.06.002 LBG 3 1.980 600 24
Order code Model Length (L) Capacity Weight
mm kgs kgs
083.07.000 LBK 1 1.970 600 12
083.07.001 LBK 2 1.170 600 15
083.07.003 LBK 4 1.470 600 18
083.07.002 LBK 3 1.970 600 24
Order code Model Length (L) Capacity Weight
mm kgs kgs
083.08.000 LBW 1 1.000 600 15
083.08.001 LBW 2 1.200 600 18
083.08.003 LBW 3 2.000 600 30
slot 12 x 40
slot 12 x 40
slot 12 x 40
-
7/31/2019 Katalog VS-englisch
30/36
30
Type RWBHinged tailboard with a five-bar treadplate surface.
form is at ground level. When fitted
to the rear of a commercial vehicle,
they can serve as a tailboard and a
load bearing access ramp.
The tailboard ramps are fabricated
from a honeycombe aluminium ex-
trusion (model RPB) or in a five bar
treadplate design plate (model
RWB), both gives an anti-slip
surface.Fitting kits are available as
per figures 1, 2 or 3 and the hinge
shaft is included.
Hinged tailboard ramps are used
between the rear deck of commer-
cial vehicles
and the loading dock, or as an ac-
cess ramp when the vehicle plat-
Hinged tailboardramps
fitting kits
model 3
Type RPB-30Hinged tailboard with 30 mm honeycombe profile.
fitting kits
model 3
fitting kits
model 1 and 2
fitting kits
model 1 and 2
Type RPB-40Hinged tailboard with 40 mm honeycombe profile.
Fitting kits
model 1
model 2
model 3
Profile of edge closer -30
(offered as an option) model 1
model 2
model 3
model 3
Order code:390.00.020
Profile of edge closer -40
(offered as an option)
Order code:390.00.019
-
7/31/2019 Katalog VS-englisch
31/36
31
Order code
model 1
391.31.000
391.31.001
391.31.002
391.31.003
391.31.004
391.31.005
391.31.006
391.31.007
Order code
model 2
391.32.000
391.32.001
391.32.002
391.32.003
391.32.004
391.32.005
391.32.006
391.32.007
Order code
model 3
391.30.000
391.30.001
391.30.002
391.30.003
391.30.004
391.30.005
391.30.006
391.30.007
Length (L)
mm
600
600
800
800
900
900
1000
1000
Width (B)
mm
2300
2500
2300
2500
2300
2500
2300
2500
Capacity
kgs
2500
2500
1900
1900
1700
1700
1500
1500
Weight
kgs
40
44
53
58
59
65
66
72
Connection designFigure 1Bolted aluminiumprofile
Figure 2Welded steel tube
Figure 3Bolt or weldedhinge
Order code
model 1
390.31.000
390.31.001
390.31.002
390.31.003
390.31.004
390.31.005
390.31.006
390.31.007
390.31.008
390.31.009
390.31.010
Order code
model 2
390.32.000
390.32.001
390.32.002
390.32.003
390.32.004
390.32.005
390.32.006
390.32.007
390.32.008
390.32.009
390.32.010
Order code
model 3
390.30.000
390.30.001
390.30.002
390.30.003
390.30.004
390.30.005
390.30.006
390.30.007
390.30.008
390.30.009
390.30.010
Length (L)
mm
565
690
815
940
1065
1190
1315
1565
1690
1815
2065
Width (B)
mm
Capacity
kgs
3500
3000
2500
2300
2100
1900
1600
1300
1100
900
700
Weight
kgs(m)
16
19
22
26
29
32
35
42
45
48
54a
s
a
n
o
p
t
i
o
n
Order code
model 3
392.30.000
392.30.001
392.30.002
392.30.003
392.30.004
392.30.005
392.30.006
392.30.007
392.30.008
392.30.009
392.30.010
Length (L)
mm
565
690
815
940
1065
1190
1315
1565
1690
1815
2065
Width (B)
mm
Capacity
kgs
4500
4000
3500
3000
2800
2600
2500
2400
2100
1800
1400
Weight
kgs(m)
21
23
27
31
33
37
41
47
51
53
60a
s
a
n
o
p
t
i
o
n
welded
bolted
-
7/31/2019 Katalog VS-englisch
32/36
32
AOS/AVS 80
AVS 110/130
VFR 120
AVS 150/170/200
VFR 120/134
VFR 134
60
156
200
182
220
6060
110100
30
20
11040
123
149
53102
100
40
15
40
150 120
20
4015
40
60
182
220
60
30
30
55
6
6
6
20
25
12
The different support- andconnection optionswith safety device.
Underside hook/bar:An underside hook/bar is welded under theramp to allow the attachment of achain or strop (not supplied).
Lip with steel pin and
movable safety device
Lip with flat material
underneath for hang in.
Tube connection for steel shaft
Lip with steel pin and
movable safety device
Lip with flat material
underneath for hang in.
Tube connection for steel shaft
Lip with steel pin and underside
hook bar. Lip with flat material underneath
for hang in.
Tube connection for steel shaft.
Hang in profile
Running surface AOS
Running surface AVS 80
Running surface 150/170/200
Running surface 150/170/200for steel tracked vehicles
Running surface AVS 110/130
-
7/31/2019 Katalog VS-englisch
33/36
33
R
W X Y
S T
Lengthdetermination
In the margin diagram, youllfind dimensions, which areused for loading or unloading.They are: length of loadingramps gradient and height dif-ference and how they are in re-
lation to each other.
Diagram
Length = Height difference
Gradient (max 30 %)x 100
Length
(S)
Gradientmax 30 % = 16,5
Heightdifference
Example:
At a height difference of 1200 mm
and a gradient of 30%,
How long the ramps have to be?
Calculation:
1200 mm30
x 100 = length 4000 mm
It is not adviseable to useramps, which have a gradientof more than 30%.
This rule is not valid forvehicles with a small groundclearance, like fork lifts, carlifts or other machines withsmall wheels.
There are exceptionsto every rule.
vehicle weight
wheel load
diameter and width of wheels
Please check these datas, as wellas the dimensions at the fork lift.
Height difference(mm)
Ramp length(mm)
-
7/31/2019 Katalog VS-englisch
34/36
34
Examples of use
AOS loading ramps
AOS loading ramps -
special version
RRK-ramp and ABS loading
ramps in combination
Light weight ABS ramps.
For heavy duty, triple track
vehicles
Foldable with pedestal
AVS 150 in use
RRK-ramp
Wheel ramps to balance height
differences
VFR-ramps, hinged with
counter balance system. Special tailgate ramps
VFR-ramps with lip support
-
7/31/2019 Katalog VS-englisch
35/36
35
Our experienced technical staff will be gladto develop your individual solution.
-
7/31/2019 Katalog VS-englisch
36/36
ALTEC GmbH
Rudolf-Diesel-Str. 7, D-78224 Singen
Phone 00 49 / 77 31/87 11-0
Fax 00 49 / 77 31/87 11 11
Pleaseorder
catalogueBridge plates
Our further delivery-items
Aluminium wheelchair ramps