kamibox. de tiny wings machinetiny wings machine kamibox. de kamibox. part one de the glued lines...
TRANSCRIPT
![Page 1: kamibox. de Tiny Wings MachineTiny Wings Machine kamibox. de kamibox. Part One de The glued lines have to be in one line. You can seal the glued lines with tape, so it will not get](https://reader035.vdocuments.mx/reader035/viewer/2022081620/611b37ef2f2a581c21171450/html5/thumbnails/1.jpg)
kamibox.de
Tiny
Win
gs M
achi
ne
![Page 2: kamibox. de Tiny Wings MachineTiny Wings Machine kamibox. de kamibox. Part One de The glued lines have to be in one line. You can seal the glued lines with tape, so it will not get](https://reader035.vdocuments.mx/reader035/viewer/2022081620/611b37ef2f2a581c21171450/html5/thumbnails/2.jpg)
kamibox.de
![Page 3: kamibox. de Tiny Wings MachineTiny Wings Machine kamibox. de kamibox. Part One de The glued lines have to be in one line. You can seal the glued lines with tape, so it will not get](https://reader035.vdocuments.mx/reader035/viewer/2022081620/611b37ef2f2a581c21171450/html5/thumbnails/3.jpg)
kamibox.dePart One
The glued lines have to be in one line.
You can seal the glued lines with tape, so it will not get caught on an edge of the casing.
![Page 4: kamibox. de Tiny Wings MachineTiny Wings Machine kamibox. de kamibox. Part One de The glued lines have to be in one line. You can seal the glued lines with tape, so it will not get](https://reader035.vdocuments.mx/reader035/viewer/2022081620/611b37ef2f2a581c21171450/html5/thumbnails/4.jpg)
kamibox.dePart Two
Part Three
You have to wrap tape around the grey area and bend it on the dotted line, otherwise it will not slide well.
Scratch all folding lines with a cutter before cutting the pieces out.
![Page 5: kamibox. de Tiny Wings MachineTiny Wings Machine kamibox. de kamibox. Part One de The glued lines have to be in one line. You can seal the glued lines with tape, so it will not get](https://reader035.vdocuments.mx/reader035/viewer/2022081620/611b37ef2f2a581c21171450/html5/thumbnails/5.jpg)
kamibox.de
Roll the long strip tight-ly around the cylindrical bottom and put the 3 sky-lashes into the cylinders. Push the spiral into the bottom hole and fiddle the orange end of the strip out of the hole. Tweezers may help.
Glue the bird in its place.
Assembling
![Page 6: kamibox. de Tiny Wings MachineTiny Wings Machine kamibox. de kamibox. Part One de The glued lines have to be in one line. You can seal the glued lines with tape, so it will not get](https://reader035.vdocuments.mx/reader035/viewer/2022081620/611b37ef2f2a581c21171450/html5/thumbnails/6.jpg)
The stabilizing back part works best when you put tape on it before cutting it out, so the friction is lower.
In general, if your bird gets stuck often, you can put tape over the edges that hinder each other.
Done.Pull the bird.Watch him fly.And don’t forget to send me a picture at [email protected]