k8s-la (salmon) - elhvb · 2005. 12. 3. · socket 754 atxpwr1 sata1 sata2 24.5cm (9.64in) floppy1...
TRANSCRIPT
-
Mot
herb
oard
K8S-LA(Salmon)
-
ii
Checklist
Contents
K8S-LA specifications summary ......................................................... iii
1. Motherboard layout ................................................................. 1
2. Central Processing Unit (CPU) ................................................. 2
3. System memory ...................................................................... 4
4. Expansion slots ........................................................................ 6
5. Jumpers ................................................................................... 8
6. Connectors .............................................................................. 9
6.1 Rear panel connectors ............................................... 9
6.2 Internal connectors .................................................. 11
-
iii
K8S-LA specifications summary
(continued on the next page)
Socket 754 for AMD Athlon® 64 processorwith HyperTransport support
SiS760SiS964
1600 MT/s @ 800 MHz
2 x 184-pin DDR DIMM sockets support unbufferednon-ECC 2 GB 400/333/266 MHz DDR SDRAMmemory modules
3 x PCI slots1 x AGP slot
2 x Ultra DMA 100/66/332 x Serial ATA
Realtek® ALC658C 6-channel CODEC
Realtek® RTL8201CL LAN PHY Fast EthernetLAN controller
VIA VT6307 supports two IEEE 1394a ports
ASUS A8000 for CPU/Chassis fan control and CPUtemperature monitoring
4 Mb LPC EEPROMAward BIOS with enhanced ACPI, DMI, Green, and
PnP Features Plus
Micro-ATX form factor: 9.6 in x 9.6 in
1 x PS/2 mouse port1 x Parallel port1 x IEEE 1394a port1 x LAN (RJ-45) port6-channel audio ports4 x USB 2.0 ports1 x VGA port1 x Serial port1 x PS/2 keyboard port
C P UC P UC P UC P UC P U
Ch ipsetCh ipsetCh ipsetCh ipsetCh ipset
Front S ide Bus (FSB)Front S ide Bus (FSB)Front S ide Bus (FSB)Front S ide Bus (FSB)Front S ide Bus (FSB)
MemoryMemoryMemoryMemoryMemory
Expans ion s lotsExpans ion s lotsExpans ion s lotsExpans ion s lotsExpans ion s lots
Sto rageSto rageSto rageSto rageSto rage
Aud ioAud i oAud i oAud i oAud i o
L A NL A NL A NL A NL A N
IEEE 1394IEEE 1394IEEE 1394IEEE 1394IEEE 1394
PC hea l th mon i tor ingPC hea l th mon i tor ingPC hea l th mon i tor ingPC hea l th mon i tor ingPC hea l th mon i tor ing
B IOS featuresB IOS featuresB IOS featuresB IOS featuresB IOS features
Form factorForm factorForm factorForm factorForm factor
Rear pane lRear pane lRear pane lRear pane lRear pane l
-
iv
K8S-LA specifications summary
* Specifications are subject to change without notice
1 x Floppy disk drive connector2 x IDE connectors1 x 20-pin ATX power connector1 x 4-pin ATX 12V power connector2 x Serial ATA connectors1 x IEEE 1394a connector2 x USB 2.0 connectors support for four additional
USB 2.0 ports1 x CPU fan connector1 x Chassis fan connector1 x CD in connector1 x AUX connector1 x SPDIF out connector1 x Front panel audio connectorSystem panel connector
Interna l connectorsInterna l connectorsInterna l connectorsInterna l connectorsInterna l connectors
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 11111
1. Motherboard layout
Socket 754
AT
XP
WR
1SATA1
SATA2
24.5cm (9.64in)
FLO
PP
Y1
K8S-LA
SiS964
1.5V AGP SLOT ONLY
Sup
erI/O
4MbBIOS
PCI 1
RealtekVT6307
CHA_FAN1
24.5
cm (
9.64
in)
SE
CO
ND
AR
Y_I
DE
1394Top:
USB1USB2
Bottom:
J6
BUZZ1
BATY1
J7
USB1
DDR XMM2 (64/72 bit, 184-pin module)
DDR XMM1 (64/72 bit, 184-pin module)
PS/2T: MouseB: Keyboard
Below:Mic InCenter:Line OutTop:Line In
RJ-45Top:
USB1USB2
Bottom:
PCI 2
PCI 3ALC658
F_PANEL1
ATX12V1
PR
IMA
RY
_ID
E
CP
U_F
AN
1
SPDIF1AUX1CD1
J3
IEEE1394_1
COM1
PA
RA
LLE
L P
OR
T
VGA
USB2
SiS760
Clear Password
Clear C
MO
S
-
22222 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
2. Unlock the socket by pressingthe lever sideways, then lift it upto a 90°-100° angle.
S o c k e tS o c k e tS o c k e tS o c k e tS o c k e tl e v e rl e v e rl e v e rl e v e rl e v e r
Make sure that the socketlever is lifted up to 90°-100°angle, otherwise the CPU doesnot fit in completely.
2 .12.12.12.12.1 Installing the CPUInstalling the CPUInstalling the CPUInstalling the CPUInstalling the CPU
Follow these steps to install a CPU.
1. Locate the 754-pin ZIF socket on the motherboard.
2. Central Processing Unit (CPU)
The motherboard comes with a surface mount 754-pin Zero Insertion Force(ZIF) socket designed for the AMD Athlon™ 64 processor. Take note of themarked corner (with gold triangle) on the CPU. This mark should match aspecific corner on the socket to ensure correct installation.
Incorrect installation of the CPU into the socket may bend the pins andseverely damage the CPU!
K8S-LA
K8S-LA CPU Socket 754
Gold Arrow
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 33333
3. Position the CPU above thesocket such that the CPU cornerwith the gold triangle matchesthe socket corner with a smalltriangle.
4. Carefully insert the CPU into thesocket until it fits in place.
5. When the CPU is in place, pushdown the socket lever to securethe CPU. The lever clicks on theside tab to indicate that it islocked.
6. Install a CPU heatsink and fanfollowing the instructions thatcame with the heatsink package.
7. Connect the CPU fan cable to theCPU_FAN connector on themotherboard.
G o l dG o l dG o l dG o l dG o l dt r i a ng l et r i a ng l et r i a ng l et r i a ng l et r i a ng l e
-
44444 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
3. System memory
The motherboard comes with two Double Data Rate (DDR) Dual InlineMemory Module (DIMM) sockets. These sockets support up to 2 GB systemmemory using 184-pin unbuffered non-ECC PC3200/PC2700/PC2100/PC1600 double-sided DDR DIMMs.
The following figure illustrates the location of the DDR DIMM sockets.
Memory configurationsMemory configurationsMemory configurationsMemory configurationsMemory configurations
You can install 128 MB, 256 MB, 512 MB, and 1 GB DDR DIMMs into theDIMM sockets using the memory configurations in this section.
K8S-LA
K8S-LA 184-pin DDR DIMM sockets
80 Pins104 Pins
A DDR DIMM is keyed with a notch so that it fits in only one direction.DO NOT force a DIMM into a socket to avoid damaging the DIMM.
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 55555
Make sure to unplug the power supply before adding or removing DIMMsor other system components. Failure to do so can cause severe damageto both the motherboard and the components.
Follow these steps to install a DIMM.
1. Unlock a DIMM socket bypressing the retaining clipsoutward.
2. Align a DIMM on the socket suchthat the notch on the DIMMmatches the break on thesocket.
3. Firmly insert the DIMM into thesocket until the retaining clipssnap back in place and the DIMMis properly seated.
Installing a DIMMInstalling a DIMMInstalling a DIMMInstalling a DIMMInstalling a DIMM
Recommended memory configurationsRecommended memory configurationsRecommended memory configurationsRecommended memory configurationsRecommended memory configurations
Memory frequency/CPU FSB synchronizationMemory frequency/CPU FSB synchronizationMemory frequency/CPU FSB synchronizationMemory frequency/CPU FSB synchronizationMemory frequency/CPU FSB synchronization
* Use on l y i dent i ca l DDR D IMM pa i r s .* Use on l y i dent i ca l DDR D IMM pa i r s .* Use on l y i dent i ca l DDR D IMM pa i r s .* Use on l y i dent i ca l DDR D IMM pa i r s .* Use on l y i dent i ca l DDR D IMM pa i r s .
C P U F S BC P U F S BC P U F S BC P U F S BC P U F S B DDR D IMM TypeDDR D IMM TypeDDR D IMM TypeDDR D IMM TypeDDR D IMM Type Memory F requencyMemory F requencyMemory F requencyMemory F requencyMemory F requency
1600 MT/s @ 800 MHz FSB PC3200/PC2700/PC2100 400/333/266 MHz
Un l o c kedUn l o c kedUn l o c kedUn l o c kedUn l o c kedr e t a i n i ngr e t a i n i ngr e t a i n i ngr e t a i n i ngr e t a i n i ngc l i pc l i pc l i pc l i pc l i p
DDR D IMM no tchDDR D IMM no tchDDR D IMM no tchDDR D IMM no tchDDR D IMM no tch
S o c k e t sS o c k e t sS o c k e t sS o c k e t sS o c k e t s
M o d eM o d eM o d eM o d eM o d e X M M 1 X M M 1 X M M 1 X M M 1 X M M 1 X M M 2X M M 2X M M 2X M M 2X M M 2
Single-channel (1) Installed —
(2) — Installed
(3)* Installed Installed
-
66666 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
4. Expansion slots
The motherboard has one PCI Express and three PCI slots.
To install and configure an expansion card:
1. Install an expansion card following the instructions that came with thechassis.
2. Turn on the system and change the necessary BIOS settings, if any.
3. Assign an IRQ to the card. Refer to the tables below.
4. Install the drivers and/or software applications for the expansion cardaccording to the card documentation.
Standard interrupt assignmentsStandard interrupt assignmentsStandard interrupt assignmentsStandard interrupt assignmentsStandard interrupt assignments
IRQ assignments for this motherboardIRQ assignments for this motherboardIRQ assignments for this motherboardIRQ assignments for this motherboardIRQ assignments for this motherboard
A B C D E F
PCI slot 1 shared — — — — —
PCI slot 2 — used — — — —
PCI slot 3 — — used — — —
AGP slot shared — — — — —
Onboard VT6307 1394a controller shared — — — — —
I R QI R QI R QI R QI R Q P r i o r i t yP r i o r i t yP r i o r i t yP r i o r i t yP r i o r i t y S tanda rd Func t i onStanda rd Func t i onStanda rd Func t i onStanda rd Func t i onStanda rd Func t i on
0 1 System Timer
1 2 Keyboard Controller
2 N/A Programmable Interrupt
3* 11 Communications Port (COM2)
4* 12 Communications Port (COM1)
5* 13 Sound Card (sometimes LPT2)
6 14 Floppy Disk Controller
7* 15 Printer Port (LPT1)
8 3 System CMOS/Real Time Clock
9* 4 ACPI Mode when used
10* 5 IRQ Holder for PCI Steering
11* 6 IRQ Holder for PCI Steering
12* 7 PS/2 Compatible Mouse Port
13 8 Numeric Data Processor
14* 9 Primary IDE Channel
15* 10 Secondary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 77777
PCI slotsPCI slotsPCI slotsPCI slotsPCI slots
There are three 32-bit PCI slots onthis motherboard. The slots supportPCI cards such as a LAN card, SCSIcard, USB card, and other cards thatcomply with PCI specifications.
When using PCI cards on shared slots, ensure that the drivers support“Share IRQ” or that the cards do not need IRQ assignments. Otherwise,conflicts will arise between the two PCI groups, making the systemunstable and the card inoperable.
AGP slotAGP slotAGP slotAGP slotAGP slot
This motherboard has an Accelerated Graphics Port (AGP) slot thatsupports +1.5V AGP cards. When you buy an AGP card, make sure that youask for one with +1.5V specification. Note the notches on the card goldenfingers to ensure that they fit the AGP slot on your motherboard.
Install only 1.5V AGP cards on this motherboard!
K8S-LA
K8S-LA Accelerated Graphics Port (AGP)
AGP Card without Retention Notch
-
88888 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
5. Jumpers
Clear RTC RAM (3-pin J6)Clear RTC RAM (3-pin J6)Clear RTC RAM (3-pin J6)Clear RTC RAM (3-pin J6)Clear RTC RAM (3-pin J6)
This jumper allows you to clear the Real Time Clock (RTC) RAM inCMOS. You can clear the CMOS memory of date, time, and systemsetup parameters by erasing the CMOS RTC RAM data. The onboardbutton cell battery powers the RAM data in CMOS, which includesystem setup information such as system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 2-3 (Normal) to pins 1-2 (ClearCMOS). Keep the cap on pins 2-3 for about 5~10 seconds, thenmove the cap back to pins 2-3.
3. Plug the power cord and turn ON the computer.
4. Hold down the key during the boot process and enter BIOSsetup to re-enter data.
Except when clearing the RTC RAM, never remove the cap from thedefault position. Removing the cap will cause system boot failure!
K8S-LA
K8S-LA Clear RTC RAM setting
NormalClear CMOS(Default)
J6
12 2
3
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 99999
Clear password (3-pin J7)Clear password (3-pin J7)Clear password (3-pin J7)Clear password (3-pin J7)Clear password (3-pin J7)
This jumper allows you to clear the password if you forgot yourpassword.
To erase the password:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 2-3 (Normal) to pins 1-2 (ClearPassword).
3. Plug the power cord and turn ON the computer.
4. As soon as you see the HP logo, turn OFF the computer.5. Move the jumper cap from pins 1-2 to pins 2-3.
6. Hold down the key during the boot process and enter BIOSsetup to verify that the password has been cleared.
K8S-LA
K8S-LA Clear password setting
J7
NormalClear Password(Default)
2 31 2
-
1 01 01 01 01 0 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
6. Connectors
6.16.16.16.16.1 Rear panel connectorsRear panel connectorsRear panel connectorsRear panel connectorsRear panel connectors
1 .1 .1 .1 .1 . PS/2 mouse port (green).PS/2 mouse port (green).PS/2 mouse port (green).PS/2 mouse port (green).PS/2 mouse port (green). This port is for a PS/2 mouse.
2 .2 .2 .2 .2 . Para l le l port .Para l le l port .Para l le l port .Para l le l port .Para l le l port . This 25-pin port connects a parallel printer, a scanner,or other devices.
3 .3 .3 .3 .3 . IEEE 1394a port .IEEE 1394a port .IEEE 1394a port .IEEE 1394a port .IEEE 1394a port . This 6-pin IEEE 1394a port provides high-speedconnectivity for audio/video devices, storage peripherals, PCs, orportable devices.
4 .4 .4 .4 .4 . LAN (RJ-45) port .LAN (RJ-45) port .LAN (RJ-45) port .LAN (RJ-45) port .LAN (RJ-45) port . This port allows Gigabit connection to a LocalArea Network (LAN) through a network hub.
5 .5 .5 .5 .5 . L ine In port ( l ight b lue).L ine In port ( l ight b lue).L ine In port ( l ight b lue).L ine In port ( l ight b lue).L ine In port ( l ight b lue). This port connects a tape, CD, DVDplayer or other audio sources.
6 .6 .6 .6 .6 . L ine Out port ( l ime).L ine Out port ( l ime).L ine Out port ( l ime).L ine Out port ( l ime).L ine Out port ( l ime). This port connects a headphone or aspeaker. In 4-channel or 6-channel mode, the function of this portbecomes Front Speaker Out.
7 .7 .7 .7 .7 . Microphone port (p ink). Microphone port (p ink). Microphone port (p ink). Microphone port (p ink). Microphone port (p ink). This port connects a microphone.
1
12
5
6
7
8
42
11
3
910
Audio 2, 4, or 6-channel configurationAudio 2, 4, or 6-channel configurationAudio 2, 4, or 6-channel configurationAudio 2, 4, or 6-channel configurationAudio 2, 4, or 6-channel configuration
Headse t /Headse t /Headse t /Headse t /Headse t /2 - channe l2 - channe l2 - channe l2 - channe l2 - channe l 4 - channe l4 - channe l4 - channe l4 - channe l4 - channe l 6 - channe l6 - channe l6 - channe l6 - channe l6 - channe l
Light Blue Line In Line In Line In
Lime Line Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Mic In
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 1 11 11 11 11 1
8 .8 .8 .8 .8 . USB 2.0 ports 3 and 4.USB 2.0 ports 3 and 4.USB 2.0 ports 3 and 4.USB 2.0 ports 3 and 4.USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus(USB) ports are available for connecting USB 2.0 devices.
9 .9 .9 .9 .9 . USB 2.0 ports 1 and 2.USB 2.0 ports 1 and 2.USB 2.0 ports 1 and 2.USB 2.0 ports 1 and 2.USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus(USB) ports are available for connecting USB 2.0 devices.
10 .10 .10 .10 .10 . Video Graphics Adapter port . Video Graphics Adapter port . Video Graphics Adapter port . Video Graphics Adapter port . Video Graphics Adapter port . This 15-pin port is for a VGAmonitor or other VGA-compatible devices.
11 .11 .11 .11 .11 . Ser ia l portSer ia l portSer ia l portSer ia l portSer ia l port. This 9-pin COM1 port is for pointing devices or otherserial devices.
12 .12 .12 .12 .12 . PS/2 keyboard port (purple) .PS/2 keyboard port (purple) .PS/2 keyboard port (purple) .PS/2 keyboard port (purple) .PS/2 keyboard port (purple) . This port is for a PS/2 keyboard.
-
1 21 21 21 21 2 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
6.26.26.26.26.2 Internal connectorsInternal connectorsInternal connectorsInternal connectorsInternal connectors
This section describes and illustrates the internal connectors on themotherboard.
1 .1 .1 .1 .1 . F loppy disk dr ive connector (34-1 pin FLOPPY1)Floppy disk dr ive connector (34-1 pin FLOPPY1)Floppy disk dr ive connector (34-1 pin FLOPPY1)Floppy disk dr ive connector (34-1 pin FLOPPY1)Floppy disk dr ive connector (34-1 pin FLOPPY1)
This connector is for the provided floppy disk drive (FDD) signal cable.Insert one end of the cable to this connector, then connect the otherend to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connectionwhen using a FDD cable with a covered Pin 5.
K8S-LA
NOTE: Orient the red markings onthe floppy ribbon cable to PIN 1
K8S-LA Floppy disk drive connector
PIN 1
FLOPPY1
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 1 31 31 31 31 3
2 .2 .2 .2 .2 . IDE connectors (40-1 pin PRIMARY_IDE, SECONDARY_IDE)IDE connectors (40-1 pin PRIMARY_IDE, SECONDARY_IDE)IDE connectors (40-1 pin PRIMARY_IDE, SECONDARY_IDE)IDE connectors (40-1 pin PRIMARY_IDE, SECONDARY_IDE)IDE connectors (40-1 pin PRIMARY_IDE, SECONDARY_IDE)
These connectors are for Ultra DMA 100/66 signal cables. The UltraDMA 100/66 signal cable has three connectors: a blue connector forthe primary IDE connector on the motherboard, a black connector foran Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive),and a gray connector for an Ultra DMA 100/66 IDE master device (harddisk drive). If you install two hard disk drives, you must configure thesecond drive as a slave device by setting its jumper accordingly. Referto the hard disk documentation for the jumper settings.
• Pin 20 on the IDE connector is removed to match the covered holeon the Ultra DMA cable connector. This prevents incorrect insertionwhen you connect the IDE cable.
• Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.
K8S-LA
K8S-LA IDE connectors
NOTE: Orient the red markings(usually zigzag) on the IDEribbon cable to PIN 1.
SE
CO
ND
AR
Y_I
DE
PIN 1
PR
IMA
RY
_ID
E
PIN 1
-
1 41 41 41 41 4 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
3 .3 .3 .3 .3 . ATX power connectors (2ATX power connectors (2ATX power connectors (2ATX power connectors (2ATX power connectors (200000-pin ATXP-pin ATXP-pin ATXP-pin ATXP-pin ATXPWR1WR1WR1WR1WR1, 4-pin ATX12V, 4-pin ATX12V, 4-pin ATX12V, 4-pin ATX12V, 4-pin ATX12V11111)))))
These connectors are for ATX power supply plugs. The power supplyplugs are designed to fit these connectors in only one orientation.Find the proper orientation and push down firmly until the connectorscompletely fit.
• Do not forget to connect the 4-pin ATX +12 V power plug;otherwise, the system will not boot up.
• Make sure that your ATX 12V power supply can provide 8A on the+12V lead and at least 1A on the +5-volt standby lead (+5VSB).The minimum recommended wattage is 230W, or 300W for a fullyconfigured system. The system can become unstable and mightexperience difficulty powering up if the power supply is inadequate.
• You must install a PSU with a higher power rating if you intend toinstall additional devices.
K8S-LA
K8S-LA ATX power connectors
ATXPWR1
+3.3VDC-12.0VDCCOMPS_ON#
COMCOM
COM-5.0VDC+5.0VDC+5.0VDC
PWR_OK
+12.0VDC
+3.3VDC+3.3VDC
COM
+5.0VDCCOM
+5.0VDC
COM
+5VSB
ATX12V1
+12V DCGND
+12V DCGND
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 1 51 51 51 51 5
K8S-LA
K8S-LA SATA connectorsSATA1
SATA2
4 .4 .4 .4 .4 . Ser ia l ATA connectors (7-pin SATA1 [black], SATA2Ser ia l ATA connectors (7-pin SATA1 [black], SATA2Ser ia l ATA connectors (7-pin SATA1 [black], SATA2Ser ia l ATA connectors (7-pin SATA1 [black], SATA2Ser ia l ATA connectors (7-pin SATA1 [black], SATA2[white])[wh ite])[wh ite])[wh ite])[wh ite])
These connectors are for the Serial ATA signal cables for Serial ATAhard disk drives.
Important notes on Ser ia l ATAImportant notes on Ser ia l ATAImportant notes on Ser ia l ATAImportant notes on Ser ia l ATAImportant notes on Ser ia l ATA
• You must install Windows® 2000 Service Pack 4 or the Windows® XPService Pack 1 before using Serial ATA hard disk drives.
• When using the connectors in SSSSStandard IDE tandard IDE tandard IDE tandard IDE tandard IDE mode, connect theprimary (boot) hard disk drive to the SATA1 connector. Refer to thetable below for the recommended SATA hard disk drive connections.
Connec to rConnec to rConnec to rConnec to rConnec to r C o l o rC o l o rC o l o rC o l o rC o l o r S e t t i n gS e t t i n gS e t t i n gS e t t i n gS e t t i n g U s eU s eU s eU s eU s e
S A T A 1S A T A 1S A T A 1S A T A 1S A T A 1 B l a c kB l a c kB l a c kB l a c kB l a c k M a s t e rM a s t e rM a s t e rM a s t e rM a s t e r Boo t d i s kBoo t d i s kBoo t d i s kBoo t d i s kBoo t d i s k
S A T A 2S A T A 2S A T A 2S A T A 2S A T A 2 W h i t eW h i t eW h i t eW h i t eW h i t e S l a v eS l a v eS l a v eS l a v eS l a v e Da t a d i s kDa t a d i s kDa t a d i s kDa t a d i s kDa t a d i s k
Serial ATA hard disk drive connectionSerial ATA hard disk drive connectionSerial ATA hard disk drive connectionSerial ATA hard disk drive connectionSerial ATA hard disk drive connection
-
1 61 61 61 61 6 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
NEVER connect a USB cab le USB cab le USB cab le USB cab le USB cab le to the IEEE 1394a connector. Doing sowill damage the motherboard!
5 .5 .5 .5 .5 . IEEE 1394a connector (10-1 pin IE1394_1)IEEE 1394a connector (10-1 pin IE1394_1)IEEE 1394a connector (10-1 pin IE1394_1)IEEE 1394a connector (10-1 pin IE1394_1)IEEE 1394a connector (10-1 pin IE1394_1)
This connector is for an IEEE 1394a port. Connect the IEEE 1394amodule cable to this connector, then install the module to a slotopening at the back of the system chassis.
K8S-LA
K8S-LA IEEE-1394 connector
IEEE1394_11
TP
A0-
GN
DT
PB
0-+
12V
GN
D
TP
A0+
GN
DT
PB
0++
12V
Never connect a 1394 cab le1394 cab le1394 cab le1394 cab le1394 cab le to the USB connectors. Doing so willdamage the motherboard!
6 .6 .6 .6 .6 . USB connectors (10-1 pin USB1, USB2)USB connectors (10-1 pin USB1, USB2)USB connectors (10-1 pin USB1, USB2)USB connectors (10-1 pin USB1, USB2)USB connectors (10-1 pin USB1, USB2)
These connectors are for USB 2.0 ports. Connect the USB/GAMEmodule cable to any of these connectors, then install the module to aslot opening at the back of the system chassis. These USB connectorscomply with USB 2.0 specification that supports up to 480 Mbpsconnection speed.
K8S-LA
K8S-LA USB 2.0 connectors
USB2
US
B+
5VU
SB
_P6-
US
B_P
6+G
ND
NC
US
B+
5VU
SB
_P5-
US
B_P
5+G
ND
1USB1
US
B+
5VU
SB
_P6-
US
B_P
6+G
ND
NC
US
B+
5VU
SB
_P5-
US
B_P
5+G
ND
1
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 1 71 71 71 71 7
77777 CPU and Chass is Fan connectorsCPU and Chass is Fan connectorsCPU and Chass is Fan connectorsCPU and Chass is Fan connectorsCPU and Chass is Fan connectors(3-pin CHA_FAN1, CPU_FAN1)(3-pin CHA_FAN1, CPU_FAN1)(3-pin CHA_FAN1, CPU_FAN1)(3-pin CHA_FAN1, CPU_FAN1)(3-pin CHA_FAN1, CPU_FAN1)
The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 Wmax.) or a total of 1 A ~ 3.48 A (41.76 W max.) at +12V. Connect thefan cables to the fan connectors on the motherboard, making sure thatthe black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors.Insufficient air flow inside the system may damage the motherboardcomponents. These are not jumpers! Do not place jumper caps on thefan connectors!
K8S-LA
K8S-LA Fan connectors
CHA_FAN1
CPU_FAN1
GN
D
Rot
atio
n+
12V
GND
Rotation+12V
8 .8 .8 .8 .8 . Internal audio connectors (4-pin CD1, AUX1)Internal audio connectors (4-pin CD1, AUX1)Internal audio connectors (4-pin CD1, AUX1)Internal audio connectors (4-pin CD1, AUX1)Internal audio connectors (4-pin CD1, AUX1)
These connectors allow you to receive stereo audio input from soundsources such as a CD-ROM, TV tuner, or MPEG card.
K8S-LA
K8S-LA Internal audio connectors
CD1
Rig
ht A
udio
Cha
nnel
Left
Aud
io C
hann
elG
roun
dG
roun
d
Rig
ht A
udio
Cha
nnel
Left
Aud
io C
hann
elG
roun
dG
roun
d
AUX1
-
1 81 81 81 81 8 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)
K8S-LA
K8S-LA Digital audio connectorSPDIF1
SP
DIF
OU
T+
5V
Gro
und
9 .9 .9 .9 .9 . Dig ita l audio connector (4-1 pin SPDIF1)Dig ita l audio connector (4-1 pin SPDIF1)Dig ita l audio connector (4-1 pin SPDIF1)Dig ita l audio connector (4-1 pin SPDIF1)Dig ita l audio connector (4-1 pin SPDIF1)
This connector is for a Sony/Philips Digital Interface (S/PDIF) port.Connect the S/PDIF module cable to this connector, then install themodule to a slot opening at the back of the system chassis.
The S/PDIF module is purchased separately.
K8S-LA
K8S-LA Front panel audio connector
J3
BLI
NE
_OU
T_L
MIC
2
Line
out
_R
Line
out
_L
BLI
NE
_OU
T_R
NC
MIC
PW
R+
5VA
AG
ND
10 .10 .10 .10 .10 . Front panel audio connector (10-1 pin J3)Front panel audio connector (10-1 pin J3)Front panel audio connector (10-1 pin J3)Front panel audio connector (10-1 pin J3)Front panel audio connector (10-1 pin J3)
This connector is for a chassis-mounted front panel audio I/O modulethat supports AC’97 audio standard.
-
ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon) 1 91 91 91 91 9
• System power LED (2-pin PWRLED)System power LED (2-pin PWRLED)System power LED (2-pin PWRLED)System power LED (2-pin PWRLED)System power LED (2-pin PWRLED)This connector is for the system power LED. Connect the chassispower LED cable to this connector. The system power LED lights upwhen you turn on the system power, and blinks when the system is insleep mode.
• Hard d isk dr ive act iv ity LED (2-pin HDLED)Hard d isk dr ive act iv ity LED (2-pin HDLED)Hard d isk dr ive act iv ity LED (2-pin HDLED)Hard d isk dr ive act iv ity LED (2-pin HDLED)Hard d isk dr ive act iv ity LED (2-pin HDLED)This connector is for the HDD Activity LED. Connect the HDD ActivityLED cable to this connector. The IDE LED lights up or flashes whendata is read from or written to the HDD.
• ATX power button/soft-off button (2-pin PWRBTN)ATX power button/soft-off button (2-pin PWRBTN)ATX power button/soft-off button (2-pin PWRBTN)ATX power button/soft-off button (2-pin PWRBTN)ATX power button/soft-off button (2-pin PWRBTN)This connector is for the system power button. Pressing the powerbutton turns the system on or puts the system in sleep or soft-offmode depending on the BIOS settings. Pressing the power switch formore than four seconds while the system is ON turns the system OFF.
• Reset button (2-p in RESET)Reset button (2-p in RESET)Reset button (2-p in RESET)Reset button (2-p in RESET)Reset button (2-p in RESET)This connector is for the chassis-mounted reset button for systemreboot without turning off the system power.
11 .11 .11 .11 .11 . System panel connector (10-pin F_PANEL1)System panel connector (10-pin F_PANEL1)System panel connector (10-pin F_PANEL1)System panel connector (10-pin F_PANEL1)System panel connector (10-pin F_PANEL1)
This connector supports several chassis-mounted functions.
K8S-LA
K8S-LA Front panel connector
F_PANEL1
PLE
D-
PW
R
PLE
D+
Gro
und
GN
DR
eset
HD
LED
+H
DLE
D-
PWRLED
RESET
PWRBTN*
HDLED
-
2 02 02 02 02 0 ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)ASUS K8S-LA (Sa lmon)