junk subs site catalogue dmze 2018 - dmz-eng.com · junk subs are designed to remove debris too...
TRANSCRIPT
1
Junk Subs are designed to remove debris too heavy to be circulated out of the hole and are normally positioned in the drill string, just above the drill bit or mill. In operation, the debris is brought up from the bottom by this circulation and drops over the lip into the cup as the circulation slows, allowing the denser material to drop back.The Junk Sub is fabricated from high quality steel, incorporating Rib Guides to prevent the cup being crushed. Junks Subs are available in three different cup lengths, the selection depending on the capacity required. If increased capacity is required several Junk Subs can be made up above the drill bit or mill.
Junk Subs are avaible with right and left thread and can be custommade to Customer specifications.
1
Junk Subs
ww
w.d
mz-
en
g.co
m
11
«DMZ Engineering», 8-A, Lodzinskaya str. Kharkov, Ukraine, 61099, tel: +38 (057) 759-13-06 e-mail: [email protected]
OD, mm Cup length, mm Length, mm Connection
100 250 1100 NC-26
100 500 1260 NC-26
100 750 1510 NC-26
108 250 1100 2 7/8 Reg
108 500 1260 2 7/8 Reg
108 750 1510 2 7/8 Reg
112 250 1100 2 7/8 Reg
112 500 1260 2 7/8 Reg
112 750 1510 2 7/8 Reg
114 250 1100 NC-31
114 500 1260 NC-31
114 750 1510 NC-31
127 250 1100 3 1/2 Reg
127 500 1260 3 1/2 Reg
127 750 1510 3 1/2 Reg
11
Junk Subs
ww
w.d
mz-
en
g.co
m
11
OD, mm Cup length, mm Length, mm Connection
133 250 1100 3 1/2 Reg
133 500 1260 3 1/2 Reg
133 750 1510 3 1/2 Reg
136 250 1100 3 1/2 Reg
136 500 1260 3 1/2 Reg
136 750 1510 3 1/2 Reg
176 250 1100 4 1/2 Reg
176 500 1260 4 1/2 Reg
176 750 1510 4 1/2 Reg
190 250 1100 4 1/2 Reg
190 500 1260 4 1/2 Reg
190 750 1510 4 1/2 Reg
194 250 1100 4 1/2 Reg
194 500 1260 4 1/2 Reg
194 750 1510 4 1/2 Reg
245 250 1100 6 5/8 Reg
245 500 1260 6 5/8 Reg
245 750 1510 6 5/8 Reg
268 250 1100 6 5/8 Reg
268 500 1260 6 5/8 Reg
268 750 1510 6 5/8 Reg
«DMZ Engineering», 8-A, Lodzinskaya str. Kharkov, Ukraine, 61099, tel: +38 (057) 759-13-06 e-mail: [email protected]